--- gcc/gcc.info-10 2018/04/24 18:00:53 1.1.1.4 +++ gcc/gcc.info-10 2018/04/24 18:10:57 1.1.1.6 @@ -1,9 +1,12 @@ -This is Info file gcc.info, produced by Makeinfo-1.49 from the input +This is Info file gcc.info, produced by Makeinfo-1.54 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 675 Massachusetts Avenue +Cambridge, MA 02139 USA + + Copyright (C) 1988, 1989, 1992, 1993 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -25,1057 +28,793 @@ permission notice, may be included in tr Software Foundation instead of in the original English.  -File: gcc.info, Node: Conversions, Next: RTL Declarations, Prev: Bit Fields, Up: RTL +File: gcc.info, Node: Bug Reporting, Next: Sending Patches, Prev: Bug Lists, Up: Bugs -Conversions -=========== +How to Report Bugs +================== - All conversions between machine modes must be represented by -explicit conversion operations. For example, an expression which is -the sum of a byte and a full word cannot be written as `(plus:SI -(reg:QI 34) (reg:SI 80))' because the `plus' operation requires two -operands of the same machine mode. Therefore, the byte-sized operand is -enclosed in a conversion operation, as in - - (plus:SI (sign_extend:SI (reg:QI 34)) (reg:SI 80)) - - The conversion operation is not a mere placeholder, because there -may be more than one way of converting from a given starting mode to -the desired final mode. The conversion operation code says how to do -it. - - For all conversion operations, X must not be `VOIDmode' because the -mode in which to do the conversion would not be known. The conversion -must either be done at compile-time or X must be placed into a register. - -`(sign_extend:M X)' - Represents the result of sign-extending the value X to machine - mode M. M must be a fixed-point mode and X a fixed-point value of - a mode narrower than M. - -`(zero_extend:M X)' - Represents the result of zero-extending the value X to machine - mode M. M must be a fixed-point mode and X a fixed-point value of - a mode narrower than M. - -`(float_extend:M X)' - Represents the result of extending the value X to machine mode M. - M must be a floating point mode and X a floating point value of a - mode narrower than M. - -`(truncate:M X)' - Represents the result of truncating the value X to machine mode M. - M must be a fixed-point mode and X a fixed-point value of a mode - wider than M. - -`(float_truncate:M X)' - Represents the result of truncating the value X to machine mode M. - M must be a floating point mode and X a floating point value of a - mode wider than M. - -`(float:M X)' - Represents the result of converting fixed point value X, regarded - as signed, to floating point mode M. - -`(unsigned_float:M X)' - Represents the result of converting fixed point value X, regarded - as unsigned, to floating point mode M. - -`(fix:M X)' - When M is a fixed point mode, represents the result of converting - floating point value X to mode M, regarded as signed. How - rounding is done is not specified, so this operation may be used - validly in compiling C code only for integer-valued operands. - -`(unsigned_fix:M X)' - Represents the result of converting floating point value X to - fixed point mode M, regarded as unsigned. How rounding is done is - not specified. - -`(fix:M X)' - When M is a floating point mode, represents the result of - converting floating point value X (valid for mode M) to an - integer, still represented in floating point mode M, by rounding - towards zero. + The fundamental principle of reporting bugs usefully is this: +*report all the facts*. If you are not sure whether to state a fact or +leave it out, state it! + + Often people omit facts because they think they know what causes the +problem and they conclude that some details don't matter. Thus, you +might assume that the name of the variable you use in an example does +not matter. Well, probably it doesn't, but one cannot be sure. +Perhaps the bug is a stray memory reference which happens to fetch from +the location where that name is stored in memory; perhaps, if the name +were different, the contents of that location would fool the compiler +into doing the right thing despite the bug. Play it safe and give a +specific, complete example. That is the easiest thing for you to do, +and the most helpful. + + Keep in mind that the purpose of a bug report is to enable someone to +fix the bug if it is not known. It isn't very important what happens if +the bug is already known. Therefore, always write your bug reports on +the assumption that the bug is not known. + + Sometimes people give a few sketchy facts and ask, "Does this ring a +bell?" This cannot help us fix a bug, so it is basically useless. We +respond by asking for enough details to enable us to investigate. You +might as well expedite matters by sending them to begin with. + + Try to make your bug report self-contained. If we have to ask you +for more information, it is best if you include all the previous +information in your response, as well as the information that was +missing. + + To enable someone to investigate the bug, you should include all +these things: + + * The version of GNU CC. You can get this by running it with the + `-v' option. + + Without this, we won't know whether there is any point in looking + for the bug in the current version of GNU CC. + + * A complete input file that will reproduce the bug. If the bug is + in the C preprocessor, send a source file and any header files + that it requires. If the bug is in the compiler proper (`cc1'), + run your source file through the C preprocessor by doing `gcc -E + SOURCEFILE > OUTFILE', then include the contents of OUTFILE in the + bug report. (When you do this, use the same `-I', `-D' or `-U' + options that you used in actual compilation.) + + A single statement is not enough of an example. In order to + compile it, it must be embedded in a complete file of compiler + input; and the bug might depend on the details of how this is done. + + Without a real example one can compile, all anyone can do about + your bug report is wish you luck. It would be futile to try to + guess how to provoke the bug. For example, bugs in register + allocation and reloading frequently depend on every little detail + of the function they happen in. + + Even if the input file that fails comes from a GNU program, you + should still send the complete test case. Don't ask the GNU CC + maintainers to do the extra work of obtaining the program in + question--they are all overworked as it is. Also, the problem may + depend on what is in the header files on your system; it is + unreliable for the GNU CC maintainers to try the problem with the + header files available to them. By sending CPP output, you can + eliminate this source of uncertainty and save us a certain + percentage of wild goose chases. + + * The command arguments you gave GNU CC or GNU C++ to compile that + example and observe the bug. For example, did you use `-O'? To + guarantee you won't omit something important, list all the options. + + If we were to try to guess the arguments, we would probably guess + wrong and then we would not encounter the bug. + + * The type of machine you are using, and the operating system name + and version number. + + * The operands you gave to the `configure' command when you installed + the compiler. + + * A complete list of any modifications you have made to the compiler + source. (We don't promise to investigate the bug unless it + happens in an unmodified compiler. But if you've made + modifications and don't tell us, then you are sending us on a wild + goose chase.) + + Be precise about these changes. A description in English is not + enough--send a context diff for them. + + Adding files of your own (such as a machine description for a + machine we don't support) is a modification of the compiler source. + + * Details of any other deviations from the standard procedure for + installing GNU CC. + + * A description of what behavior you observe that you believe is + incorrect. For example, "The compiler gets a fatal signal," or, + "The assembler instruction at line 208 in the output is incorrect." + + Of course, if the bug is that the compiler gets a fatal signal, + then one can't miss it. But if the bug is incorrect output, the + maintainer might not notice unless it is glaringly wrong. None of + us has time to study all the assembler code from a 50-line C + program just on the chance that one instruction might be wrong. + We need *you* to do this part! + + Even if the problem you experience is a fatal signal, you should + still say so explicitly. Suppose something strange is going on, + such as, your copy of the compiler is out of synch, or you have + encountered a bug in the C library on your system. (This has + happened!) Your copy might crash and the copy here would not. If + you said to expect a crash, then when the compiler here fails to + crash, we would know that the bug was not happening. If you don't + say to expect a crash, then we would not know whether the bug was + happening. We would not be able to draw any conclusion from our + observations. + + If the problem is a diagnostic when compiling GNU CC with some + other compiler, say whether it is a warning or an error. + + Often the observed symptom is incorrect output when your program + is run. Sad to say, this is not enough information unless the + program is short and simple. None of us has time to study a large + program to figure out how it would work if compiled correctly, + much less which line of it was compiled wrong. So you will have + to do that. Tell us which source line it is, and what incorrect + result happens when that line is executed. A person who + understands the program can find this as easily as finding a bug + in the program itself. + + * If you send examples of assembler code output from GNU CC or GNU + C++, please use `-g' when you make them. The debugging information + includes source line numbers which are essential for correlating + the output with the input. + + * If you wish to mention something in the GNU CC source, refer to it + by context, not by line number. + + The line numbers in the development sources don't match those in + your sources. Your line numbers would convey no useful + information to the maintainers. + + * Additional information from a debugger might enable someone to + find a problem on a machine which he does not have available. + However, you need to think when you collect this information if + you want it to have any chance of being useful. + + For example, many people send just a backtrace, but that is never + useful by itself. A simple backtrace with arguments conveys little + about GNU CC because the compiler is largely data-driven; the same + functions are called over and over for different RTL insns, doing + different things depending on the details of the insn. + + Most of the arguments listed in the backtrace are useless because + they are pointers to RTL list structure. The numeric values of the + pointers, which the debugger prints in the backtrace, have no + significance whatever; all that matters is the contents of the + objects they point to (and most of the contents are other such + pointers). + + In addition, most compiler passes consist of one or more loops that + scan the RTL insn sequence. The most vital piece of information + about such a loop--which insn it has reached--is usually in a + local variable, not in an argument. + + What you need to provide in addition to a backtrace are the values + of the local variables for several stack frames up. When a local + variable or an argument is an RTX, first print its value and then + use the GDB command `pr' to print the RTL expression that it points + to. (If GDB doesn't run on your machine, use your debugger to call + the function `debug_rtx' with the RTX as an argument.) In + general, whenever a variable is a pointer, its value is no use + without the data it points to. + + Here are some things that are not necessary: + + * A description of the envelope of the bug. + + Often people who encounter a bug spend a lot of time investigating + which changes to the input file will make the bug go away and which + changes will not affect it. + + This is often time consuming and not very useful, because the way + we will find the bug is by running a single example under the + debugger with breakpoints, not by pure deduction from a series of + examples. You might as well save your time for something else. + + Of course, if you can find a simpler example to report *instead* of + the original one, that is a convenience. Errors in the output + will be easier to spot, running under the debugger will take less + time, etc. Most GNU CC bugs involve just one function, so the + most straightforward way to simplify an example is to delete all + the function definitions except the one where the bug occurs. + Those earlier in the file may be replaced by external declarations + if the crucial function depends on them. (Exception: inline + functions may affect compilation of functions defined later in the + file.) + + However, simplification is not vital; if you don't want to do this, + report the bug anyway and send the entire test case you used. + + * In particular, some people insert conditionals `#ifdef BUG' around + a statement which, if removed, makes the bug not happen. These + are just clutter; we won't pay any attention to them anyway. + Besides, you should send us cpp output, and that can't have + conditionals. + + * A patch for the bug. + + A patch for the bug is useful if it is a good one. But don't omit + the necessary information, such as the test case, on the + assumption that a patch is all we need. We might see problems + with your patch and decide to fix the problem another way, or we + might not understand it at all. + + Sometimes with a program as complicated as GNU CC it is very hard + to construct an example that will make the program follow a + certain path through the code. If you don't send the example, we + won't be able to construct one, so we won't be able to verify that + the bug is fixed. + + And if we can't understand what bug you are trying to fix, or why + your patch should be an improvement, we won't install it. A test + case will help us to understand. + + *Note Sending Patches::, for guidelines on how to make it easy for + us to understand and install your patches. + + * A guess about what the bug is or what it depends on. + + Such guesses are usually wrong. Even I can't guess right about + such things without first using the debugger to find the facts. + + * A core dump file. + + We have no way of examining a core dump for your type of machine + unless we have an identical system--and if we do have one, we + should be able to reproduce the crash ourselves.  -File: gcc.info, Node: RTL Declarations, Next: Side Effects, Prev: Conversions, Up: RTL +File: gcc.info, Node: Sending Patches, Prev: Bug Reporting, Up: Bugs -Declarations -============ +Sending Patches for GNU CC +========================== - Declaration expression codes do not represent arithmetic operations -but rather state assertions about their operands. + If you would like to write bug fixes or improvements for the GNU C +compiler, that is very helpful. When you send your changes, please +follow these guidelines to avoid causing extra work for us in studying +the patches. + + If you don't follow these guidelines, your information might still be +useful, but using it will take extra work. Maintaining GNU C is a lot +of work in the best of circumstances, and we can't keep up unless you do +your best to help. + + * Send an explanation with your changes of what problem they fix or + what improvement they bring about. For a bug fix, just include a + copy of the bug report, and explain why the change fixes the bug. + + (Referring to a bug report is not as good as including it, because + then we will have to look it up, and we have probably already + deleted it if we've already fixed the bug.) + + * Always include a proper bug report for the problem you think you + have fixed. We need to convince ourselves that the change is + right before installing it. Even if it is right, we might have + trouble judging it if we don't have a way to reproduce the problem. + + * Include all the comments that are appropriate to help people + reading the source in the future understand why this change was + needed. + + * Don't mix together changes made for different reasons. Send them + *individually*. + + If you make two changes for separate reasons, then we might not + want to install them both. We might want to install just one. If + you send them all jumbled together in a single set of diffs, we + have to do extra work to disentangle them--to figure out which + parts of the change serve which purpose. If we don't have time + for this, we might have to ignore your changes entirely. + + If you send each change as soon as you have written it, with its + own explanation, then the two changes never get tangled up, and we + can consider each one properly without any extra work to + disentangle them. + + Ideally, each change you send should be impossible to subdivide + into parts that we might want to consider separately, because each + of its parts gets its motivation from the other parts. + + * Send each change as soon as that change is finished. Sometimes + people think they are helping us by accumulating many changes to + send them all together. As explained above, this is absolutely + the worst thing you could do. + + Since you should send each change separately, you might as well + send it right away. That gives us the option of installing it + immediately if it is important. + + * Use `diff -c' to make your diffs. Diffs without context are hard + for us to install reliably. More than that, they make it hard for + us to study the diffs to decide whether we want to install them. + Unidiff format is better than contextless diffs, but not as easy + to read as `-c' format. + + If you have GNU diff, use `diff -cp', which shows the name of the + function that each change occurs in. + + * Write the change log entries for your changes. We get lots of + changes, and we don't have time to do all the change log writing + ourselves. + + Read the `ChangeLog' file to see what sorts of information to put + in, and to learn the style that we use. The purpose of the change + log is to show people where to find what was changed. So you need + to be specific about what functions you changed; in large + functions, it's often helpful to indicate where within the + function the change was. + + On the other hand, once you have shown people where to find the + change, you need not explain its purpose. Thus, if you add a new + function, all you need to say about it is that it is new. If you + feel that the purpose needs explaining, it probably does--but the + explanation will be much more useful if you put it in comments in + the code. + + If you would like your name to appear in the header line for who + made the change, send us the header line. + + * When you write the fix, keep in mind that we can't install a + change that would break other systems. + + People often suggest fixing a problem by changing + machine-independent files such as `toplev.c' to do something + special that a particular system needs. Sometimes it is totally + obvious that such changes would break GNU CC for almost all users. + We can't possibly make a change like that. At best it might tell + us how to write another patch that would solve the problem + acceptably. + + Sometimes people send fixes that *might* be an improvement in + general--but it is hard to be sure of this. It's hard to install + such changes because we have to study them very carefully. Of + course, a good explanation of the reasoning by which you concluded + the change was correct can help convince us. + + The safest changes are changes to the configuration files for a + particular machine. These are safe because they can't create new + bugs on other machines. -`(strict_low_part (subreg:M (reg:N R) 0))' - This expression code is used in only one context: as the - destination operand of a `set' expression. In addition, the - operand of this expression must be a non-paradoxical `subreg' - expression. - - The presence of `strict_low_part' says that the part of the - register which is meaningful in mode N, but is not part of mode M, - is not to be altered. Normally, an assignment to such a subreg is - allowed to have undefined effects on the rest of the register when - M is less than a word. + Please help us keep up with the workload by designing the patch in + a form that is good to install.  -File: gcc.info, Node: Side Effects, Next: Incdec, Prev: RTL Declarations, Up: RTL +File: gcc.info, Node: Service, Next: VMS, Prev: Bugs, Up: Top + +How To Get Help with GNU CC +*************************** + + If you need help installing, using or changing GNU CC, there are two +ways to find it: -Side Effect Expressions -======================= + * Send a message to a suitable network mailing list. First try + `bug-gcc@prep.ai.mit.edu', and if that brings no response, try + `help-gcc@prep.ai.mit.edu'. - The expression codes described so far represent values, not actions. -But machine instructions never produce values; they are meaningful only -for their side effects on the state of the machine. Special expression -codes are used to represent side effects. - - The body of an instruction is always one of these side effect codes; -the codes described above, which represent values, appear only as the -operands of these. - -`(set LVAL X)' - Represents the action of storing the value of X into the place - represented by LVAL. LVAL must be an expression representing a - place that can be stored in: `reg' (or `subreg' or - `strict_low_part'), `mem', `pc' or `cc0'. - - If LVAL is a `reg', `subreg' or `mem', it has a machine mode; then - X must be valid for that mode. - - If LVAL is a `reg' whose machine mode is less than the full width - of the register, then it means that the part of the register - specified by the machine mode is given the specified value and the - rest of the register receives an undefined value. Likewise, if - LVAL is a `subreg' whose machine mode is narrower than the mode of - the register, the rest of the register can be changed in an - undefined way. - - If LVAL is a `strict_low_part' of a `subreg', then the part of the - register specified by the machine mode of the `subreg' is given - the value X and the rest of the register is not changed. - - If LVAL is `(cc0)', it has no machine mode, and X may be either a - `compare' expression or a value that may have any mode. The latter - case represents a "test" instruction. The expression `(set (cc0) - (reg:M N))' is equivalent to `(set (cc0) (compare (reg:M N) - (const_int 0)))'. Use the former expression to save space during - the compilation. - - If LVAL is `(pc)', we have a jump instruction, and the - possibilities for X are very limited. It may be a `label_ref' - expression (unconditional jump). It may be an `if_then_else' - (conditional jump), in which case either the second or the third - operand must be `(pc)' (for the case which does not jump) and the - other of the two must be a `label_ref' (for the case which does - jump). X may also be a `mem' or `(plus:SI (pc) Y)', where Y may - be a `reg' or a `mem'; these unusual patterns are used to - represent jumps through branch tables. - - If LVAL is neither `(cc0)' nor `(pc)', the mode of LVAL must not - be `VOIDmode' and the mode of X must be valid for the mode of LVAL. - - LVAL is customarily accessed with the `SET_DEST' macro and X with - the `SET_SRC' macro. - -`(return)' - As the sole expression in a pattern, represents a return from the - current function, on machines where this can be done with one - instruction, such as Vaxes. On machines where a multi-instruction - "epilogue" must be executed in order to return from the function, - returning is done by jumping to a label which precedes the - epilogue, and the `return' expression code is never used. - - Inside an `if_then_else' expression, represents the value to be - placed in `pc' to return to the caller. - - Note that an insn pattern of `(return)' is logically equivalent to - `(set (pc) (return))', but the latter form is never used. - -`(call FUNCTION NARGS)' - Represents a function call. FUNCTION is a `mem' expression whose - address is the address of the function to be called. NARGS is an - expression which can be used for two purposes: on some machines it - represents the number of bytes of stack argument; on others, it - represents the number of argument registers. - - Each machine has a standard machine mode which FUNCTION must have. - The machine description defines macro `FUNCTION_MODE' to expand - into the requisite mode name. The purpose of this mode is to - specify what kind of addressing is allowed, on machines where the - allowed kinds of addressing depend on the machine mode being - addressed. - -`(clobber X)' - Represents the storing or possible storing of an unpredictable, - undescribed value into X, which must be a `reg', `scratch' or - `mem' expression. - - One place this is used is in string instructions that store - standard values into particular hard registers. It may not be - worth the trouble to describe the values that are stored, but it - is essential to inform the compiler that the registers will be - altered, lest it attempt to keep data in them across the string - instruction. - - If X is `(mem:BLK (const_int 0))', it means that all memory - locations must be presumed clobbered. - - Note that the machine description classifies certain hard - registers as "call-clobbered". All function call instructions are - assumed by default to clobber these registers, so there is no need - to use `clobber' expressions to indicate this fact. Also, each - function call is assumed to have the potential to alter any memory - location, unless the function is declared `const'. - - If the last group of expressions in a `parallel' are each a - `clobber' expression whose arguments are `reg' or `match_scratch' - (*note RTL Template::.) expressions, the combiner phase can add - the appropriate `clobber' expressions to an insn it has - constructed when doing so will cause a pattern to be matched. - - This feature can be used, for example, on a machine that whose - multiply and add instructions don't use an MQ register but which - has an add-accumulate instruction that does clobber the MQ - register. Similarly, a combined instruction might require a - temporary register while the constituent instructions might not. - - When a `clobber' expression for a register appears inside a - `parallel' with other side effects, the register allocator - guarantees that the register is unoccupied both before and after - that insn. However, the reload phase may allocate a register used - for one of the inputs unless the `&' constraint is specified for - the selected alternative (*note Modifiers::.). You can clobber - either a specific hard register, a pseudo register, or a `scratch' - expression; in the latter two cases, GNU CC will allocate a hard - register that is available there for use as a temporary. - - For instructions that require a temporary register, you should use - `scratch' instead of a pseudo-register because this will allow the - combiner phase to add the `clobber' when required. You do this by - coding (`clobber' (`match_scratch' ...)). If you do clobber a - pseudo register, use one which appears nowhere else--generate a - new one each time. Otherwise, you may confuse CSE. - - There is one other known use for clobbering a pseudo register in a - `parallel': when one of the input operands of the insn is also - clobbered by the insn. In this case, using the same pseudo - register in the clobber and elsewhere in the insn produces the - expected results. - -`(use X)' - Represents the use of the value of X. It indicates that the value - in X at this point in the program is needed, even though it may - not be apparent why this is so. Therefore, the compiler will not - attempt to delete previous instructions whose only effect is to - store a value in X. X must be a `reg' expression. - - During the delayed branch scheduling phase, X may be an insn. This - indicates that X previously was located at this place in the code - and its data dependencies need to be taken into account. These - `use' insns will be deleted before the delayed branch scheduling - phase exits. - -`(parallel [X0 X1 ...])' - Represents several side effects performed in parallel. The square - brackets stand for a vector; the operand of `parallel' is a vector - of expressions. X0, X1 and so on are individual side effect - expressions--expressions of code `set', `call', `return', - `clobber' or `use'. - - "In parallel" means that first all the values used in the - individual side-effects are computed, and second all the actual - side-effects are performed. For example, - - (parallel [(set (reg:SI 1) (mem:SI (reg:SI 1))) - (set (mem:SI (reg:SI 1)) (reg:SI 1))]) - - says unambiguously that the values of hard register 1 and the - memory location addressed by it are interchanged. In both places - where `(reg:SI 1)' appears as a memory address it refers to the - value in register 1 *before* the execution of the insn. - - It follows that it is *incorrect* to use `parallel' and expect the - result of one `set' to be available for the next one. For example, - people sometimes attempt to represent a jump-if-zero instruction - this way: - - (parallel [(set (cc0) (reg:SI 34)) - (set (pc) (if_then_else - (eq (cc0) (const_int 0)) - (label_ref ...) - (pc)))]) - - But this is incorrect, because it says that the jump condition - depends on the condition code value *before* this instruction, not - on the new value that is set by this instruction. - - Peephole optimization, which takes place together with final - assembly code output, can produce insns whose patterns consist of - a `parallel' whose elements are the operands needed to output the - resulting assembler code--often `reg', `mem' or constant - expressions. This would not be well-formed RTL at any other stage - in compilation, but it is ok then because no further optimization - remains to be done. However, the definition of the macro - `NOTICE_UPDATE_CC', if any, must deal with such insns if you - define any peephole optimizations. - -`(sequence [INSNS ...])' - Represents a sequence of insns. Each of the INSNS that appears in - the vector is suitable for appearing in the chain of insns, so it - must be an `insn', `jump_insn', `call_insn', `code_label', - `barrier' or `note'. - - A `sequence' RTX is never placed in an actual insn during RTL - generation. It represents the sequence of insns that result from a - `define_expand' *before* those insns are passed to `emit_insn' to - insert them in the chain of insns. When actually inserted, the - individual sub-insns are separated out and the `sequence' is - forgotten. - - After delay-slot scheduling is completed, an insn and all the - insns that reside in its delay slots are grouped together into a - `sequence'. The insn requiring the delay slot is the first insn in - the vector; subsequent insns are to be placed in the delay slot. - - `INSN_ANNULLED_BRANCH_P' is set on an insn in a delay slot to - indicate that a branch insn should be used that will conditionally - annul the effect of the insns in the delay slots. In such a case, - `INSN_FROM_TARGET_P' indicates that the insn is from the target of - the branch and should be executed only if the branch is taken; - otherwise the insn should be executed only if the branch is not - taken. *Note Delay Slots::. - - These expression codes appear in place of a side effect, as the body -of an insn, though strictly speaking they do not always describe side -effects as such: - -`(asm_input S)' - Represents literal assembler code as described by the string S. - -`(unspec [OPERANDS ...] INDEX)' -`(unspec_volatile [OPERANDS ...] INDEX)' - Represents a machine-specific operation on OPERANDS. INDEX - selects between multiple machine-specific operations. - `unspec_volatile' is used for volatile operations and operations - that may trap; `unspec' is used for other operations. - - These codes may appear inside a `pattern' of an insn, inside a - `parallel', or inside an expression. - -`(addr_vec:M [LR0 LR1 ...])' - Represents a table of jump addresses. The vector elements LR0, - etc., are `label_ref' expressions. The mode M specifies how much - space is given to each address; normally M would be `Pmode'. - -`(addr_diff_vec:M BASE [LR0 LR1 ...])' - Represents a table of jump addresses expressed as offsets from - BASE. The vector elements LR0, etc., are `label_ref' expressions - and so is BASE. The mode M specifies how much space is given to - each address-difference. + * Look in the service directory for someone who might help you for a + fee. The service directory is found in the file named `SERVICE' + in the GNU CC distribution.  -File: gcc.info, Node: Incdec, Next: Assembler, Prev: Side Effects, Up: RTL +File: gcc.info, Node: VMS, Next: Portability, Prev: Service, Up: Top -Embedded Side-Effects on Addresses -================================== +Using GNU CC on VMS +******************* - Four special side-effect expression codes appear as memory addresses. +* Menu: -`(pre_dec:M X)' - Represents the side effect of decrementing X by a standard amount - and represents also the value that X has after being decremented. - X must be a `reg' or `mem', but most machines allow only a `reg'. - M must be the machine mode for pointers on the machine in use. - The amount X is decremented by is the length in bytes of the - machine mode of the containing memory reference of which this - expression serves as the address. Here is an example of its use: - - (mem:DF (pre_dec:SI (reg:SI 39))) - - This says to decrement pseudo register 39 by the length of a - `DFmode' value and use the result to address a `DFmode' value. - -`(pre_inc:M X)' - Similar, but specifies incrementing X instead of decrementing it. - -`(post_dec:M X)' - Represents the same side effect as `pre_dec' but a different - value. The value represented here is the value X has before being - decremented. - -`(post_inc:M X)' - Similar, but specifies incrementing X instead of decrementing it. - - These embedded side effect expressions must be used with care. -Instruction patterns may not use them. Until the `flow' pass of the -compiler, they may occur only to represent pushes onto the stack. The -`flow' pass finds cases where registers are incremented or decremented -in one instruction and used as an address shortly before or after; -these cases are then transformed to use pre- or post-increment or --decrement. - - If a register used as the operand of these expressions is used in -another address in an insn, the original value of the register is used. -Uses of the register outside of an address are not permitted within the -same insn as a use in an embedded side effect expression because such -insns behave differently on different machines and hence must be treated -as ambiguous and disallowed. - - An instruction that can be represented with an embedded side effect -could also be represented using `parallel' containing an additional -`set' to describe how the address register is altered. This is not -done because machines that allow these operations at all typically -allow them wherever a memory address is called for. Describing them as -additional parallel stores would require doubling the number of entries -in the machine description. +* Include Files and VMS:: Where the preprocessor looks for the include files. +* Global Declarations:: How to do globaldef, globalref and globalvalue with + GNU CC. +* VMS Misc:: Misc information.  -File: gcc.info, Node: Assembler, Next: Insns, Prev: IncDec, Up: RTL +File: gcc.info, Node: Include Files and VMS, Next: Global Declarations, Up: VMS -Assembler Instructions as Expressions -===================================== +Include Files and VMS +===================== - The RTX code `asm_operands' represents a value produced by a -user-specified assembler instruction. It is used to represent an `asm' -statement with arguments. An `asm' statement with a single output -operand, like this: - - asm ("foo %1,%2,%0" : "=a" (outputvar) : "g" (x + y), "di" (*z)); - -is represented using a single `asm_operands' RTX which represents the -value that is stored in `outputvar': - - (set RTX-FOR-OUTPUTVAR - (asm_operands "foo %1,%2,%0" "a" 0 - [RTX-FOR-ADDITION-RESULT RTX-FOR-*Z] - [(asm_input:M1 "g") - (asm_input:M2 "di")])) - -Here the operands of the `asm_operands' RTX are the assembler template -string, the output-operand's constraint, the index-number of the output -operand among the output operands specified, a vector of input operand -RTX's, and a vector of input-operand modes and constraints. The mode -M1 is the mode of the sum `x+y'; M2 is that of `*z'. - - When an `asm' statement has multiple output values, its insn has -several such `set' RTX's inside of a `parallel'. Each `set' contains a -`asm_operands'; all of these share the same assembler template and -vectors, but each contains the constraint for the respective output -operand. They are also distinguished by the output-operand index -number, which is 0, 1, ... for successive output operands. + Due to the differences between the filesystems of Unix and VMS, GNU +CC attempts to translate file names in `#include' into names that VMS +will understand. The basic strategy is to prepend a prefix to the +specification of the include file, convert the whole filename to a VMS +filename, and then try to open the file. GNU CC tries various prefixes +one by one until one of them succeeds: + + 1. The first prefix is the `GNU_CC_INCLUDE:' logical name: this is + where GNU C header files are traditionally stored. If you wish to + store header files in non-standard locations, then you can assign + the logical `GNU_CC_INCLUDE' to be a search list, where each + element of the list is suitable for use with a rooted logical. + + 2. The next prefix tried is `SYS$SYSROOT:[SYSLIB.]'. This is where + VAX-C header files are traditionally stored. + + 3. If the include file specification by itself is a valid VMS + filename, the preprocessor then uses this name with no prefix in + an attempt to open the include file. + + 4. If the file specification is not a valid VMS filename (i.e. does + not contain a device or a directory specifier, and contains a `/' + character), the preprocessor tries to convert it from Unix syntax + to VMS syntax. + + Conversion works like this: the first directory name becomes a + device, and the rest of the directories are converted into + VMS-format directory names. For example, the name `X11/foobar.h' + is translated to `X11:[000000]foobar.h' or `X11:foobar.h', + whichever one can be opened. This strategy allows you to assign a + logical name to point to the actual location of the header files. + + 5. If none of these strategies succeeds, the `#include' fails. + + Include directives of the form: + + #include foobar + +are a common source of incompatibility between VAX-C and GNU CC. VAX-C +treats this much like a standard `#include ' directive. That +is incompatible with the ANSI C behavior implemented by GNU CC: to +expand the name `foobar' as a macro. Macro expansion should eventually +yield one of the two standard formats for `#include': + + #include "FILE" + #include + + If you have this problem, the best solution is to modify the source +to convert the `#include' directives to one of the two standard forms. +That will work with either compiler. If you want a quick and dirty fix, +define the file names as macros with the proper expansion, like this: + + #define stdio + +This will work, as long as the name doesn't conflict with anything else +in the program. + + Another source of incompatibility is that VAX-C assumes that: + + #include "foobar" + +is actually asking for the file `foobar.h'. GNU CC does not make this +assumption, and instead takes what you ask for literally; it tries to +read the file `foobar'. The best way to avoid this problem is to +always specify the desired file extension in your include directives. + + GNU CC for VMS is distributed with a set of include files that is +sufficient to compile most general purpose programs. Even though the +GNU CC distribution does not contain header files to define constants +and structures for some VMS system-specific functions, there is no +reason why you cannot use GNU CC with any of these functions. You first +may have to generate or create header files, either by using the public +domain utility `UNSDL' (which can be found on a DECUS tape), or by +extracting the relevant modules from one of the system macro libraries, +and using an editor to construct a C header file. + + A `#include' file name cannot contain a DECNET node name. The +preprocessor reports an I/O error if you attempt to use a node name, +whether explicitly, or implicitly via a logical name.  -File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL +File: gcc.info, Node: Global Declarations, Next: VMS Misc, Prev: Include Files and VMS, Up: VMS -Insns -===== +Global Declarations and VMS +=========================== - The RTL representation of the code for a function is a doubly-linked -chain of objects called "insns". Insns are expressions with special -codes that are used for no other purpose. Some insns are actual -instructions; others represent dispatch tables for `switch' statements; -others represent labels to jump to or various sorts of declarative -information. - - In addition to its own specific data, each insn must have a unique -id-number that distinguishes it from all other insns in the current -function (after delayed branch scheduling, copies of an insn with the -same id-number may be present in multiple places in a function, but -these copies will always be identical and will only appear inside a -`sequence'), and chain pointers to the preceding and following insns. -These three fields occupy the same position in every insn, independent -of the expression code of the insn. They could be accessed with `XEXP' -and `XINT', but instead three special macros are always used: - -`INSN_UID (I)' - Accesses the unique id of insn I. - -`PREV_INSN (I)' - Accesses the chain pointer to the insn preceding I. If I is the - first insn, this is a null pointer. - -`NEXT_INSN (I)' - Accesses the chain pointer to the insn following I. If I is the - last insn, this is a null pointer. - - The first insn in the chain is obtained by calling `get_insns'; the -last insn is the result of calling `get_last_insn'. Within the chain -delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must -always correspond: if INSN is not the first insn, - - NEXT_INSN (PREV_INSN (INSN)) == INSN - -is always true and if INSN is not the last insn, - - PREV_INSN (NEXT_INSN (INSN)) == INSN - -is always true. - - After delay slot scheduling, some of the insns in the chain might be -`sequence' expressions, which contain a vector of insns. The value of -`NEXT_INSN' in all but the last of these insns is the next insn in the -vector; the value of `NEXT_INSN' of the last insn in the vector is the -same as the value of `NEXT_INSN' for the `sequence' in which it is -contained. Similar rules apply for `PREV_INSN'. - - This means that the above invariants are not necessarily true for -insns inside `sequence' expressions. Specifically, if INSN is the -first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn -containing the `sequence' expression, as is the value of `PREV_INSN -(NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' -expression. You can use these expressions to find the containing -`sequence' expression. - - Every insn has one of the following six expression codes: - -`insn' - The expression code `insn' is used for instructions that do not - jump and do not do function calls. `sequence' expressions are - always contained in insns with code `insn' even if one of those - insns should jump or do function calls. - - Insns with code `insn' have four additional fields beyond the three - mandatory ones listed above. These four are described in a table - below. - -`jump_insn' - The expression code `jump_insn' is used for instructions that may - jump (or, more generally, may contain `label_ref' expressions). If - there is an instruction to return from the current function, it is - recorded as a `jump_insn'. - - `jump_insn' insns have the same extra fields as `insn' insns, - accessed in the same way and in addition contains a field - `JUMP_LABEL' which is defined once jump optimization has completed. - - For simple conditional and unconditional jumps, this field - contains the `code_label' to which this insn will (possibly - conditionally) branch. In a more complex jump, `JUMP_LABEL' - records one of the labels that the insn refers to; the only way to - find the others is to scan the entire body of the insn. - - Return insns count as jumps, but since they do not refer to any - labels, they have zero in the `JUMP_LABEL' field. - -`call_insn' - The expression code `call_insn' is used for instructions that may - do function calls. It is important to distinguish these - instructions because they imply that certain registers and memory - locations may be altered unpredictably. - - A `call_insn' insn may be preceded by insns that contain a single - `use' expression and be followed by insns the contain a single - `clobber' expression. If so, these `use' and `clobber' - expressions are treated as being part of the function call. There - must not even be a `note' between the `call_insn' and the `use' or - `clobber' insns for this special treatment to take place. This is - somewhat of a kludge and will be removed in a later version of GNU - CC. - - `call_insn' insns have the same extra fields as `insn' insns, - accessed in the same way. - -`code_label' - A `code_label' insn represents a label that a jump insn can jump - to. It contains two special fields of data in addition to the - three standard ones. `CODE_LABEL_NUMBER' is used to hold the - "label number", a number that identifies this label uniquely among - all the labels in the compilation (not just in the current - function). Ultimately, the label is represented in the assembler - output as an assembler label, usually of the form `LN' where N is - the label number. - - When a `code_label' appears in an RTL expression, it normally - appears within a `label_ref' which represents the address of the - label, as a number. - - The field `LABEL_NUSES' is only defined once the jump optimization - phase is completed and contains the number of times this label is - referenced in the current function. - -`barrier' - Barriers are placed in the instruction stream when control cannot - flow past them. They are placed after unconditional jump - instructions to indicate that the jumps are unconditional and - after calls to `volatile' functions, which do not return (e.g., - `exit'). They contain no information beyond the three standard - fields. - -`note' - `note' insns are used to represent additional debugging and - declarative information. They contain two nonstandard fields, an - integer which is accessed with the macro `NOTE_LINE_NUMBER' and a - string accessed with `NOTE_SOURCE_FILE'. - - If `NOTE_LINE_NUMBER' is positive, the note represents the - position of a source line and `NOTE_SOURCE_FILE' is the source - file name that the line came from. These notes control generation - of line number data in the assembler output. - - Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a - code with one of the following values (and `NOTE_SOURCE_FILE' must - contain a null pointer): - - `NOTE_INSN_DELETED' - Such a note is completely ignorable. Some passes of the - compiler delete insns by altering them into notes of this - kind. - - `NOTE_INSN_BLOCK_BEG' - `NOTE_INSN_BLOCK_END' - These types of notes indicate the position of the beginning - and end of a level of scoping of variable names. They - control the output of debugging information. - - `NOTE_INSN_LOOP_BEG' - `NOTE_INSN_LOOP_END' - These types of notes indicate the position of the beginning - and end of a `while' or `for' loop. They enable the loop - optimizer to find loops quickly. - - `NOTE_INSN_LOOP_CONT' - Appears at the place in a loop that `continue' statements - jump to. - - `NOTE_INSN_LOOP_VTOP' - This note indicates the place in a loop where the exit test - begins for those loops in which the exit test has been - duplicated. This position becomes another virtual start of - the loop when considering loop invariants. - - `NOTE_INSN_FUNCTION_END' - Appears near the end of the function body, just before the - label that `return' statements jump to (on machine where a - single instruction does not suffice for returning). This - note may be deleted by jump optimization. - - `NOTE_INSN_SETJMP' - Appears following each call to `setjmp' or a related function. - - These codes are printed symbolically when they appear in debugging - dumps. - - The machine mode of an insn is normally `VOIDmode', but some phases -use the mode for various purposes; for example, the reload pass sets it -to `HImode' if the insn needs reloading but not register elimination -and `QImode' if both are required. The common subexpression -elimination pass sets the mode of an insn to `QImode' when it is the -first insn in a block that has already been processed. - - Here is a table of the extra fields of `insn', `jump_insn' and -`call_insn' insns: - -`PATTERN (I)' - An expression for the side effect performed by this insn. This - must be one of the following codes: `set', `call', `use', - `clobber', `return', `asm_input', `asm_output', `addr_vec', - `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', - `parallel', or `sequence'. If it is a `parallel', each element of - the `parallel' must be one these codes, except that `parallel' - expressions cannot be nested and `addr_vec' and `addr_diff_vec' - are not permitted inside a `parallel' expression. - -`INSN_CODE (I)' - An integer that says which pattern in the machine description - matches this insn, or -1 if the matching has not yet been - attempted. - - Such matching is never attempted and this field remains -1 on an - insn whose pattern consists of a single `use', `clobber', - `asm_input', `addr_vec' or `addr_diff_vec' expression. - - Matching is also never attempted on insns that result from an `asm' - statement. These contain at least one `asm_operands' expression. - The function `asm_noperands' returns a non-negative value for such - insns. - - In the debugging output, this field is printed as a number - followed by a symbolic representation that locates the pattern in - the `md' file as some small positive or negative offset from a - named pattern. - -`LOG_LINKS (I)' - A list (chain of `insn_list' expressions) giving information about - dependencies between instructions within a basic block. Neither a - jump nor a label may come between the related insns. - -`REG_NOTES (I)' - A list (chain of `expr_list' and `insn_list' expressions) giving - miscellaneous information about the insn. It is often information - pertaining to the registers used in this insn. - - The `LOG_LINKS' field of an insn is a chain of `insn_list' -expressions. Each of these has two operands: the first is an insn, and -the second is another `insn_list' expression (the next one in the -chain). The last `insn_list' in the chain has a null pointer as second -operand. The significant thing about the chain is which insns appear -in it (as first operands of `insn_list' expressions). Their order is -not significant. - - This list is originally set up by the flow analysis pass; it is a -null pointer until then. Flow only adds links for those data -dependencies which can be used for instruction combination. For each -insn, the flow analysis pass adds a link to insns which store into -registers values that are used for the first time in this insn. The -instruction scheduling pass adds extra links so that every dependence -will be represented. Links represent data dependencies, -antidependencies and output dependencies; the machine mode of the link -distinguishes these three types: antidependencies have mode -`REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and -data dependencies have mode `VOIDmode'. - - The `REG_NOTES' field of an insn is a chain similar to the -`LOG_LINKS' field but it includes `expr_list' expressions in addition -to `insn_list' expressions. There are several kinds of register notes, -which are distinguished by the machine mode, which in a register note -is really understood as being an `enum reg_note'. The first operand OP -of the note is data whose meaning depends on the kind of note. - - The macro `REG_NOTE_KIND (X)' returns the kind of register note. -Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the -register note type of X to be NEWKIND. - - Register notes are of three classes: They may say something about an -input to an insn, they may say something about an output of an insn, or -they may create a linkage between two insns. There are also a set of -values that are only used in `LOG_LINKS'. - - These register notes annotate inputs to an insn: - -`REG_DEAD' - The value in OP dies in this insn; that is to say, altering the - value immediately after this insn would not affect the future - behavior of the program. - - This does not necessarily mean that the register OP has no useful - value after this insn since it may also be an output of the insn. - In such a case, however, a `REG_DEAD' note would be redundant and - is usually not present until after the reload pass, but no code - relies on this fact. - -`REG_INC' - The register OP is incremented (or decremented; at this level - there is no distinction) by an embedded side effect inside this - insn. This means it appears in a `post_inc', `pre_inc', `post_dec' - or `pre_dec' expression. - -`REG_NONNEG' - The register OP is known to have a nonnegative value when this - insn is reached. This is used so that decrement and branch until - zero instructions, such as the m68k dbra, can be matched. - - The `REG_NONNEG' note is added to insns only if the machine - description contains a pattern named - `decrement_and_branch_until_zero'. - -`REG_NO_CONFLICT' - This insn does not cause a conflict between OP and the item being - set by this insn even though it might appear that it does. In - other words, if the destination register and OP could otherwise be - assigned the same register, this insn does not prevent that - assignment. - - Insns with this note are usually part of a block that begins with a - `clobber' insn specifying a multi-word pseudo register (which will - be the output of the block), a group of insns that each set one - word of the value and have the `REG_NO_CONFLICT' note attached, - and a final insn that copies the output to itself with an attached - `REG_EQUAL' note giving the expression being computed. This block - is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the - first and last insns, respectively. - -`REG_LABEL' - This insn uses OP, a `code_label', but is not a `jump_insn'. The - presence of this note allows jump optimization to be aware that OP - is, in fact, being used. - - The following notes describe attributes of outputs of an insn: - -`REG_EQUIV' -`REG_EQUAL' - This note is only valid on an insn that sets only one register and - indicates that that register will be equal to OP at run time; the - scope of this equivalence differs between the two types of notes. - The value which the insn explicitly copies into the register may - look different from OP, but they will be equal at run time. If the - output of the single `set' is a `strict_low_part' expression, the - note refers to the register that is contained in `SUBREG_REG' of - the `subreg' expression. - - For `REG_EQUIV', the register is equivalent to OP throughout the - entire function, and could validly be replaced in all its - occurrences by OP. ("Validly" here refers to the data flow of the - program; simple replacement may make some insns invalid.) For - example, when a constant is loaded into a register that is never - assigned any other value, this kind of note is used. - - When a parameter is copied into a pseudo-register at entry to a - function, a note of this kind records that the register is - equivalent to the stack slot where the parameter was passed. - Although in this case the register may be set by other insns, it - is still valid to replace the register by the stack slot - throughout the function. - - In the case of `REG_EQUAL', the register that is set by this insn - will be equal to OP at run time at the end of this insn but not - necessarily elsewhere in the function. In this case, OP is - typically an arithmetic expression. For example, when a sequence - of insns such as a library call is used to perform an arithmetic - operation, this kind of note is attached to the insn that produces - or copies the final value. - - These two notes are used in different ways by the compiler passes. - `REG_EQUAL' is used by passes prior to register allocation (such as - common subexpression elimination and loop optimization) to tell - them how to think of that value. `REG_EQUIV' notes are used by - register allocation to indicate that there is an available - substitute expression (either a constant or a `mem' expression for - the location of a parameter on the stack) that may be used in - place of a register if insufficient registers are available. - - Except for stack homes for parameters, which are indicated by a - `REG_EQUIV' note and are not useful to the early optimization - passes and pseudo registers that are equivalent to a memory - location throughout there entire life, which is not detected until - later in the compilation, all equivalences are initially indicated - by an attached `REG_EQUAL' note. In the early stages of register - allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note - if OP is a constant and the insn represents the only set of its - destination register. - - Thus, compiler passes prior to register allocation need only check - for `REG_EQUAL' notes and passes subsequent to register allocation - need only check for `REG_EQUIV' notes. - -`REG_UNUSED' - The register OP being set by this insn will not be used in a - subsequent insn. This differs from a `REG_DEAD' note, which - indicates that the value in an input will not be used subsequently. - These two notes are independent; both may be present for the same - register. - -`REG_WAS_0' - The single output of this insn contained zero before this insn. OP - is the insn that set it to zero. You can rely on this note if it - is present and OP has not been deleted or turned into a `note'; - its absence implies nothing. - - These notes describe linkages between insns. They occur in pairs: -one insn has one of a pair of notes that points to a second insn, which -has the inverse note pointing back to the first insn. - -`REG_RETVAL' - This insn copies the value of a multi-insn sequence (for example, a - library call), and OP is the first insn of the sequence (for a - library call, the first insn that was generated to set up the - arguments for the library call). - - Loop optimization uses this note to treat such a sequence as a - single operation for code motion purposes and flow analysis uses - this note to delete such sequences whose results are dead. - - A `REG_EQUAL' note will also usually be attached to this insn to - provide the expression being computed by the sequence. - -`REG_LIBCALL' - This is the inverse of `REG_RETVAL': it is placed on the first - insn of a multi-insn sequence, and it points to the last one. - -`REG_CC_SETTER' -`REG_CC_USER' - On machines that use `cc0', the insns which set and use `cc0' set - and use `cc0' are adjacent. However, when branch delay slot - filling is done, this may no longer be true. In this case a - `REG_CC_USER' note will be placed on the insn setting `cc0' to - point to the insn using `cc0' and a `REG_CC_SETTER' note will be - placed on the insn using `cc0' to point to the insn setting `cc0'. - - These values are only used in the `LOG_LINKS' field, and indicate -the type of dependency that each link represents. Links which indicate -a data dependence (a read after write dependence) do not use any code, -they simply have mode `VOIDmode', and are printed without any -descriptive text. - -`REG_DEP_ANTI' - This indicates an anti dependence (a write after read dependence). - -`REG_DEP_OUTPUT' - This indicates an output dependence (a write after write - dependence). - - For convenience, the machine mode in an `insn_list' or `expr_list' -is printed using these symbolic codes in debugging dumps. - - The only difference between the expression codes `insn_list' and -`expr_list' is that the first operand of an `insn_list' is assumed to -be an insn and is printed in debugging dumps as the insn's unique id; -the first operand of an `expr_list' is printed in the ordinary way as -an expression. + GNU CC does not provide the `globalref', `globaldef' and +`globalvalue' keywords of VAX-C. You can get the same effect with an +obscure feature of GAS, the GNU assembler. (This requires GAS version +1.39 or later.) The following macros allow you to use this feature in +a fairly natural way: + + #ifdef __GNUC__ + #define GLOBALREF(TYPE,NAME) \ + TYPE NAME \ + asm ("_$$PsectAttributes_GLOBALSYMBOL$$" #NAME) + #define GLOBALDEF(TYPE,NAME,VALUE) \ + TYPE NAME \ + asm ("_$$PsectAttributes_GLOBALSYMBOL$$" #NAME) \ + = VALUE + #define GLOBALVALUEREF(TYPE,NAME) \ + const TYPE NAME[1] \ + asm ("_$$PsectAttributes_GLOBALVALUE$$" #NAME) + #define GLOBALVALUEDEF(TYPE,NAME,VALUE) \ + const TYPE NAME[1] \ + asm ("_$$PsectAttributes_GLOBALVALUE$$" #NAME) \ + = {VALUE} + #else + #define GLOBALREF(TYPE,NAME) \ + globalref TYPE NAME + #define GLOBALDEF(TYPE,NAME,VALUE) \ + globaldef TYPE NAME = VALUE + #define GLOBALVALUEDEF(TYPE,NAME,VALUE) \ + globalvalue TYPE NAME = VALUE + #define GLOBALVALUEREF(TYPE,NAME) \ + globalvalue TYPE NAME + #endif + +(The `_$$PsectAttributes_GLOBALSYMBOL' prefix at the start of the name +is removed by the assembler, after it has modified the attributes of +the symbol). These macros are provided in the VMS binaries +distribution in a header file `GNU_HACKS.H'. An example of the usage +is: + + GLOBALREF (int, ijk); + GLOBALDEF (int, jkl, 0); + + The macros `GLOBALREF' and `GLOBALDEF' cannot be used +straightforwardly for arrays, since there is no way to insert the array +dimension into the declaration at the right place. However, you can +declare an array with these macros if you first define a typedef for the +array type, like this: + + typedef int intvector[10]; + GLOBALREF (intvector, foo); + + Array and structure initializers will also break the macros; you can +define the initializer to be a macro of its own, or you can expand the +`GLOBALDEF' macro by hand. You may find a case where you wish to use +the `GLOBALDEF' macro with a large array, but you are not interested in +explicitly initializing each element of the array. In such cases you +can use an initializer like: `{0,}', which will initialize the entire +array to `0'. + + A shortcoming of this implementation is that a variable declared with +`GLOBALVALUEREF' or `GLOBALVALUEDEF' is always an array. For example, +the declaration: + + GLOBALVALUEREF(int, ijk); + +declares the variable `ijk' as an array of type `int [1]'. This is +done because a globalvalue is actually a constant; its "value" is what +the linker would normally consider an address. That is not how an +integer value works in C, but it is how an array works. So treating +the symbol as an array name gives consistent results--with the +exception that the value seems to have the wrong type. *Don't try to +access an element of the array.* It doesn't have any elements. The +array "address" may not be the address of actual storage. + + The fact that the symbol is an array may lead to warnings where the +variable is used. Insert type casts to avoid the warnings. Here is an +example; it takes advantage of the ANSI C feature allowing macros that +expand to use the same name as the macro itself. + + GLOBALVALUEREF (int, ss$_normal); + GLOBALVALUEDEF (int, xyzzy,123); + #ifdef __GNUC__ + #define ss$_normal ((int) ss$_normal) + #define xyzzy ((int) xyzzy) + #endif + + Don't use `globaldef' or `globalref' with a variable whose type is +an enumeration type; this is not implemented. Instead, make the +variable an integer, and use a `globalvaluedef' for each of the +enumeration values. An example of this would be: + + #ifdef __GNUC__ + GLOBALDEF (int, color, 0); + GLOBALVALUEDEF (int, RED, 0); + GLOBALVALUEDEF (int, BLUE, 1); + GLOBALVALUEDEF (int, GREEN, 3); + #else + enum globaldef color {RED, BLUE, GREEN = 3}; + #endif  -File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL +File: gcc.info, Node: VMS Misc, Prev: Global Declarations, Up: VMS -RTL Representation of Function-Call Insns -========================================= +Other VMS Issues +================ - Insns that call subroutines have the RTL expression code `call_insn'. -These insns must satisfy special rules, and their bodies must use a -special RTL expression code, `call'. - - A `call' expression has two operands, as follows: - - (call (mem:FM ADDR) NBYTES) - -Here NBYTES is an operand that represents the number of bytes of -argument data being passed to the subroutine, FM is a machine mode -(which must equal as the definition of the `FUNCTION_MODE' macro in the -machine description) and ADDR represents the address of the subroutine. - - For a subroutine that returns no value, the `call' expression as -shown above is the entire body of the insn, except that the insn might -also contain `use' or `clobber' expressions. - - For a subroutine that returns a value whose mode is not `BLKmode', -the value is returned in a hard register. If this register's number is -R, then the body of the call insn looks like this: - - (set (reg:M R) - (call (mem:FM ADDR) NBYTES)) - -This RTL expression makes it clear (to the optimizer passes) that the -appropriate register receives a useful value in this insn. - - When a subroutine returns a `BLKmode' value, it is handled by -passing to the subroutine the address of a place to store the value. So -the call insn itself does not "return" any value, and it has the same -RTL form as a call that returns nothing. - - On some machines, the call instruction itself clobbers some register, -for example to contain the return address. `call_insn' insns on these -machines should have a body which is a `parallel' that contains both -the `call' expression and `clobber' expressions that indicate which -registers are destroyed. Similarly, if the call instruction requires -some register other than the stack pointer that is not explicitly -mentioned it its RTL, a `use' subexpression should mention that -register. - - Functions that are called are assumed to modify all registers listed -in the configuration macro `CALL_USED_REGISTERS' (*note Register -Basics::.) and, with the exception of `const' functions and library -calls, to modify all of memory. - - Insns containing just `use' expressions directly precede the -`call_insn' insn to indicate which registers contain inputs to the -function. Similarly, if registers other than those in -`CALL_USED_REGISTERS' are clobbered by the called function, insns -containing a single `clobber' follow immediately after the call to -indicate which registers. + GNU CC automatically arranges for `main' to return 1 by default if +you fail to specify an explicit return value. This will be interpreted +by VMS as a status code indicating a normal successful completion. +Version 1 of GNU CC did not provide this default. + + GNU CC on VMS works only with the GNU assembler, GAS. You need +version 1.37 or later of GAS in order to produce value debugging +information for the VMS debugger. Use the ordinary VMS linker with the +object files produced by GAS. + + Under previous versions of GNU CC, the generated code would +occasionally give strange results when linked to the sharable `VAXCRTL' +library. Now this should work. + + A caveat for use of `const' global variables: the `const' modifier +must be specified in every external declaration of the variable in all +of the source files that use that variable. Otherwise the linker will +issue warnings about conflicting attributes for the variable. Your +program will still work despite the warnings, but the variable will be +placed in writable storage. + + Although the VMS linker does distinguish between upper and lower case +letters in global symbols, most VMS compilers convert all such symbols +into upper case and most run-time library routines also have upper case +names. To be able to reliably call such routines, GNU CC (by means of +the assembler GAS) converts global symbols into upper case like other +VMS compilers. However, since the usual practice in C is to distinguish +case, GNU CC (via GAS) tries to preserve usual C behavior by augmenting +each name that is not all lower case. This means truncating the name +to at most 23 characters and then adding more characters at the end +which encode the case pattern of those 23. Names which contain at +least one dollar sign are an exception; they are converted directly into +upper case without augmentation. + + Name augmentation yields bad results for programs that use +precompiled libraries (such as Xlib) which were generated by another +compiler. You can use the compiler option `/NOCASE_HACK' to inhibit +augmentation; it makes external C functions and variables +case-independent as is usual on VMS. Alternatively, you could write +all references to the functions and variables in such libraries using +lower case; this will work on VMS, but is not portable to other +systems. The compiler option `/NAMES' also provides control over +global name handling. + + Function and variable names are handled somewhat differently with GNU +C++. The GNU C++ compiler performs "name mangling" on function names, +which means that it adds information to the function name to describe +the data types of the arguments that the function takes. One result of +this is that the name of a function can become very long. Since the +VMS linker only recognizes the first 31 characters in a name, special +action is taken to ensure that each function and variable has a unique +name that can be represented in 31 characters. + + If the name (plus a name augmentation, if required) is less than 32 +characters in length, then no special action is performed. If the name +is longer than 31 characters, the assembler (GAS) will generate a hash +string based upon the function name, truncate the function name to 23 +characters, and append the hash string to the truncated name. If the +`/VERBOSE' compiler option is used, the assembler will print both the +full and truncated names of each symbol that is truncated. + + The `/NOCASE_HACK' compiler option should not be used when you are +compiling programs that use libg++. libg++ has several instances of +objects (i.e. `Filebuf' and `filebuf') which become indistinguishable +in a case-insensitive environment. This leads to cases where you need +to inhibit augmentation selectively (if you were using libg++ and Xlib +in the same program, for example). There is no special feature for +doing this, but you can get the result by defining a macro for each +mixed case symbol for which you wish to inhibit augmentation. The +macro should expand into the lower case equivalent of itself. For +example: - -File: gcc.info, Node: Sharing, Prev: Calls, Up: RTL + #define StuDlyCapS studlycaps -Structure Sharing Assumptions -============================= - - The compiler assumes that certain kinds of RTL expressions are -unique; there do not exist two distinct objects representing the same -value. In other cases, it makes an opposite assumption: that no RTL -expression object of a certain kind appears in more than one place in -the containing structure. - - These assumptions refer to a single function; except for the RTL -objects that describe global variables and external functions, and a -few standard objects such as small integer constants, no RTL objects -are common to two functions. - - * Each pseudo-register has only a single `reg' object to represent - it, and therefore only a single machine mode. - - * For any symbolic label, there is only one `symbol_ref' object - referring to it. - - * There is only one `const_int' expression with value 0, only one - with value 1, and only one with value -1. Some other integer - values are also stored uniquely. - - * There is only one `pc' expression. - - * There is only one `cc0' expression. - - * There is only one `const_double' expression with value 0 for each - floating point mode. Likewise for values 1 and 2. - - * No `label_ref' or `scratch' appears in more than one place in the - RTL structure; in other words, it is safe to do a tree-walk of all - the insns in the function and assume that each time a `label_ref' - or `scratch' is seen it is distinct from all others that are seen. - - * Only one `mem' object is normally created for each static variable - or stack slot, so these objects are frequently shared in all the - places they appear. However, separate but equal objects for these - variables are occasionally made. - - * When a single `asm' statement has multiple output operands, a - distinct `asm_operands' expression is made for each output operand. - However, these all share the vector which contains the sequence of - input operands. This sharing is used later on to test whether two - `asm_operands' expressions come from the same statement, so all - optimizations must carefully preserve the sharing if they copy the - vector at all. - - * No RTL object appears in more than one place in the RTL structure - except as described above. Many passes of the compiler rely on - this by assuming that they can modify RTL objects in place without - unwanted side-effects on other insns. - - * During initial RTL generation, shared structure is freely - introduced. After all the RTL for a function has been generated, - all shared structure is copied by `unshare_all_rtl' in - `emit-rtl.c', after which the above rules are guaranteed to be - followed. - - * During the combiner pass, shared structure within an insn can exist - temporarily. However, the shared structure is copied before the - combiner is finished with the insn. This is done by calling - `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'. + These macro definitions can be placed in a header file to minimize +the number of changes to your source code.  -File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top - -Machine Descriptions -******************** +File: gcc.info, Node: Portability, Next: Interface, Prev: VMS, Up: Top - A machine description has two parts: a file of instruction patterns -(`.md' file) and a C header file of macro definitions. +GNU CC and Portability +********************** - The `.md' file for a target machine contains a pattern for each -instruction that the target machine supports (or at least each -instruction that is worth telling the compiler about). It may also -contain comments. A semicolon causes the rest of the line to be a -comment, unless the semicolon is inside a quoted string. + The main goal of GNU CC was to make a good, fast compiler for +machines in the class that the GNU system aims to run on: 32-bit +machines that address 8-bit bytes and have several general registers. +Elegance, theoretical power and simplicity are only secondary. + + GNU CC gets most of the information about the target machine from a +machine description which gives an algebraic formula for each of the +machine's instructions. This is a very clean way to describe the +target. But when the compiler needs information that is difficult to +express in this fashion, I have not hesitated to define an ad-hoc +parameter to the machine description. The purpose of portability is to +reduce the total work needed on the compiler; it was not of interest +for its own sake. + + GNU CC does not contain machine dependent code, but it does contain +code that depends on machine parameters such as endianness (whether the +most significant byte has the highest or lowest address of the bytes in +a word) and the availability of autoincrement addressing. In the +RTL-generation pass, it is often necessary to have multiple strategies +for generating code for a particular kind of syntax tree, strategies +that are usable for different combinations of parameters. Often I have +not tried to address all possible cases, but only the common ones or +only the ones that I have encountered. As a result, a new target may +require additional strategies. You will know if this happens because +the compiler will call `abort'. Fortunately, the new strategies can be +added in a machine-independent fashion, and will affect only the target +machines that need them. - See the next chapter for information on the C header file. + +File: gcc.info, Node: Interface, Next: Passes, Prev: Portability, Up: Top -* Menu: +Interfacing to GNU CC Output +**************************** -* Patterns:: How to write instruction patterns. -* Example:: An explained example of a `define_insn' pattern. -* RTL Template:: The RTL template defines what insns match a pattern. -* Output Template:: The output template says how to make assembler code - from such an insn. -* Output Statement:: For more generality, write C code to output - the assembler code. -* Constraints:: When not all operands are general operands. -* Standard Names:: Names mark patterns to use for code generation. -* Pattern Ordering:: When the order of patterns makes a difference. -* Dependent Patterns:: Having one pattern may make you need another. -* Jump Patterns:: Special considerations for patterns for jump insns. -* Insn Canonicalizations::Canonicalization of Instructions -* Peephole Definitions::Defining machine-specific peephole optimizations. -* Expander Definitions::Generating a sequence of several RTL insns - for a standard operation. -* Insn Splitting:: Splitting Instructions into Multiple Instructions -* Insn Attributes:: Specifying the value of attributes for generated insns. + GNU CC is normally configured to use the same function calling +convention normally in use on the target system. This is done with the +machine-description macros described (*note Target Macros::.). + + However, returning of structure and union values is done differently +on some target machines. As a result, functions compiled with PCC +returning such types cannot be called from code compiled with GNU CC, +and vice versa. This does not cause trouble often because few Unix +library routines return structures or unions. + + GNU CC code returns structures and unions that are 1, 2, 4 or 8 bytes +long in the same registers used for `int' or `double' return values. +(GNU CC typically allocates variables of such types in registers also.) +Structures and unions of other sizes are returned by storing them into +an address passed by the caller (usually in a register). The +machine-description macros `STRUCT_VALUE' and `STRUCT_INCOMING_VALUE' +tell GNU CC where to pass this address. + + By contrast, PCC on most target machines returns structures and +unions of any size by copying the data into an area of static storage, +and then returning the address of that storage as if it were a pointer +value. The caller must copy the data from that memory area to the +place where the value is wanted. This is slower than the method used +by GNU CC, and fails to be reentrant. + + On some target machines, such as RISC machines and the 80386, the +standard system convention is to pass to the subroutine the address of +where to return the value. On these machines, GNU CC has been +configured to be compatible with the standard compiler, when this method +is used. It may not be compatible for structures of 1, 2, 4 or 8 bytes. + + GNU CC uses the system's standard convention for passing arguments. +On some machines, the first few arguments are passed in registers; in +others, all are passed on the stack. It would be possible to use +registers for argument passing on any machine, and this would probably +result in a significant speedup. But the result would be complete +incompatibility with code that follows the standard convention. So this +change is practical only if you are switching to GNU CC as the sole C +compiler for the system. We may implement register argument passing on +certain machines once we have a complete GNU system so that we can +compile the libraries with GNU CC. + + On some machines (particularly the Sparc), certain types of arguments +are passed "by invisible reference". This means that the value is +stored in memory, and the address of the memory location is passed to +the subroutine. + + If you use `longjmp', beware of automatic variables. ANSI C says +that automatic variables that are not declared `volatile' have undefined +values after a `longjmp'. And this is all GNU CC promises to do, +because it is very difficult to restore register variables correctly, +and one of GNU CC's features is that it can put variables in registers +without your asking it to. + + If you want a variable to be unaltered by `longjmp', and you don't +want to write `volatile' because old C compilers don't accept it, just +take the address of the variable. If a variable's address is ever +taken, even if just to compute it and ignore it, then the variable +cannot go in a register: + + { + int careful; + &careful; + ... + } + + Code compiled with GNU CC may call certain library routines. Most of +them handle arithmetic for which there are no instructions. This +includes multiply and divide on some machines, and floating point +operations on any machine for which floating point support is disabled +with `-msoft-float'. Some standard parts of the C library, such as +`bcopy' or `memcpy', are also called automatically. The usual function +call interface is used for calling the library routines. + + These library routines should be defined in the library `libgcc.a', +which GNU CC automatically searches whenever it links a program. On +machines that have multiply and divide instructions, if hardware +floating point is in use, normally `libgcc.a' is not needed, but it is +searched just in case. + + Each arithmetic function is defined in `libgcc1.c' to use the +corresponding C arithmetic operator. As long as the file is compiled +with another C compiler, which supports all the C arithmetic operators, +this file will work portably. However, `libgcc1.c' does not work if +compiled with GNU CC, because each arithmetic function would compile +into a call to itself! - \ No newline at end of file