--- gcc/gcc.info-11 2018/04/24 17:51:24 1.1.1.1 +++ gcc/gcc.info-11 2018/04/24 18:11:54 1.1.1.6 @@ -1,1091 +1,1158 @@ -This is Info file gcc.info, produced by Makeinfo-1.43 from the input +This is Info file gcc.info, produced by Makeinfo-1.54 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 675 Massachusetts Avenue +Cambridge, MA 02139 USA - Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -are preserved on all copies. + Copyright (C) 1988, 1989, 1992, 1993 Free Software Foundation, Inc. + + Permission is granted to make and distribute verbatim copies of this +manual provided the copyright notice and this permission notice are +preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the section entitled "GNU General Public License" is included -exactly as in the original, and provided that the entire resulting -derived work is distributed under the terms of a permission notice -identical to this one. +that the sections entitled "GNU General Public License" and "Protect +Your Freedom--Fight `Look And Feel'" are included exactly as in the +original, and provided that the entire resulting derived work is +distributed under the terms of a permission notice identical to this +one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified -versions, except that the section entitled "GNU General Public -License" and this permission notice may be included in translations -approved by the Free Software Foundation instead of in the original -English. +versions, except that the sections entitled "GNU General Public +License" and "Protect Your Freedom--Fight `Look And Feel'", and this +permission notice, may be included in translations approved by the Free +Software Foundation instead of in the original English.  -File: gcc.info, Node: Insn Splitting, Next: Insn Attributes, Prev: Expander Definitions, Up: Machine Desc +File: gcc.info, Node: Passes, Next: RTL, Prev: Interface, Up: Top -Splitting Instructions into Multiple Instructions -================================================= +Passes and Files of the Compiler +******************************** - On machines that have instructions requiring delay slots (*note -Delay Slots::.) or that have instructions whose output is not -available for multiple cycles (*note Function Units::.), the compiler -phases that optimize these cases need to be able to move insns into -one-cycle delay slots. However, some insns may generate more than one -machine instruction. These insns would be unable to be placed into a -delay slot. - - It is often possible to write the single insn as a list of -individual insns, each corresponding to one machine instruction. The -disadvantage of doing so is that it will cause the compilation to be -slower and require more space. If the resulting insns are too -complex, it may also suppress some optimizations. - - The `define_split' definition tells the compiler how to split a -complex insn into several simpler insns. This spilling will be -performed if there is a reason to believe that it might improve -instruction or delay slot scheduling. The definition looks like this: - - (define_split - [INSN-PATTERN] - "CONDITION" - [NEW-INSN-PATTERN-1 - NEW-INSN-PATTERN-2 - ...] - "PREPARATION STATEMENTS") - - INSN-PATTERN is a pattern that needs to be split and CONDITION is -the final condition to be tested, as in a `define_insn'. Any insn -matched by a `define_split' must also be matched by a `define_insn' in -case it does not need to be split. - - When an insn matching INSN-PATTERN and satisfying CONDITION is -found, it is replaced in the insn list with the insns given by -NEW-INSN-PATTERN-1, NEW-INSN-PATTERN-2, etc. - - The PREPARATION STATEMENTS are similar to those specified for -`define_expand' (*note Expander Definitions::.) and are executed -before the new RTL is generated to prepare for the generated code or -emit some insns whose pattern is not fixed. - - As a simple case, consider the following example from the AMD 29000 -machine description, which splits a `sign_extend' from `HImode' to -`SImode' into a pair of shift insns: - - (define_split - [(set (match_operand:SI 0 "gen_reg_operand" "") - (sign_extend:SI (match_operand:HI 1 "gen_reg_operand" "")))] - "" - [(set (match_dup 0) - (ashift:SI (match_dup 1) - (const_int 16))) - (set (match_dup 0) - (ashiftrt:SI (match_dup 0) - (const_int 16)))] - " - { operands[1] = gen_lowpart (SImode, operands[1]); }") + The overall control structure of the compiler is in `toplev.c'. This +file is responsible for initialization, decoding arguments, opening and +closing files, and sequencing the passes. + + The parsing pass is invoked only once, to parse the entire input. +The RTL intermediate code for a function is generated as the function +is parsed, a statement at a time. Each statement is read in as a +syntax tree and then converted to RTL; then the storage for the tree +for the statement is reclaimed. Storage for types (and the expressions +for their sizes), declarations, and a representation of the binding +contours and how they nest, remain until the function is finished being +compiled; these are all needed to output the debugging information. + + Each time the parsing pass reads a complete function definition or +top-level declaration, it calls either the function +`rest_of_compilation', or the function `rest_of_decl_compilation' in +`toplev.c', which are responsible for all further processing necessary, +ending with output of the assembler language. All other compiler +passes run, in sequence, within `rest_of_compilation'. When that +function returns from compiling a function definition, the storage used +for that function definition's compilation is entirely freed, unless it +is an inline function (*note An Inline Function is As Fast As a Macro: +Inline.). + + Here is a list of all the passes of the compiler and their source +files. Also included is a description of where debugging dumps can be +requested with `-d' options. + + * Parsing. This pass reads the entire text of a function definition, + constructing partial syntax trees. This and RTL generation are no + longer truly separate passes (formerly they were), but it is + easier to think of them as separate. + + The tree representation does not entirely follow C syntax, because + it is intended to support other languages as well. + + Language-specific data type analysis is also done in this pass, + and every tree node that represents an expression has a data type + attached. Variables are represented as declaration nodes. + + Constant folding and some arithmetic simplifications are also done + during this pass. + + The language-independent source files for parsing are + `stor-layout.c', `fold-const.c', and `tree.c'. There are also + header files `tree.h' and `tree.def' which define the format of + the tree representation. + + The source files to parse C are `c-parse.in', `c-decl.c', + `c-typeck.c', `c-aux-info.c', `c-convert.c', and `c-lang.c' along + with header files `c-lex.h', and `c-tree.h'. + + The source files for parsing C++ are `cp-parse.y', `cp-class.c', + `cp-cvt.c', `cp-decl.c', `cp-decl2.c', `cp-dem.c', `cp-except.c', + `cp-expr.c', `cp-init.c', `cp-lex.c', `cp-method.c', `cp-ptree.c', + `cp-search.c', `cp-tree.c', `cp-type2.c', and `cp-typeck.c', along + with header files `cp-tree.def', `cp-tree.h', and `cp-decl.h'. + + The special source files for parsing Objective C are + `objc-parse.y', `objc-actions.c', `objc-tree.def', and + `objc-actions.h'. Certain C-specific files are used for this as + well. + + The file `c-common.c' is also used for all of the above languages. + + * RTL generation. This is the conversion of syntax tree into RTL + code. It is actually done statement-by-statement during parsing, + but for most purposes it can be thought of as a separate pass. + + This is where the bulk of target-parameter-dependent code is found, + since often it is necessary for strategies to apply only when + certain standard kinds of instructions are available. The purpose + of named instruction patterns is to provide this information to + the RTL generation pass. + + Optimization is done in this pass for `if'-conditions that are + comparisons, boolean operations or conditional expressions. Tail + recursion is detected at this time also. Decisions are made about + how best to arrange loops and how to output `switch' statements. + + The source files for RTL generation include `stmt.c', `calls.c', + `expr.c', `explow.c', `expmed.c', `function.c', `optabs.c' and + `emit-rtl.c'. Also, the file `insn-emit.c', generated from the + machine description by the program `genemit', is used in this + pass. The header file `expr.h' is used for communication within + this pass. + + The header files `insn-flags.h' and `insn-codes.h', generated from + the machine description by the programs `genflags' and `gencodes', + tell this pass which standard names are available for use and + which patterns correspond to them. + + Aside from debugging information output, none of the following + passes refers to the tree structure representation of the function + (only part of which is saved). + + The decision of whether the function can and should be expanded + inline in its subsequent callers is made at the end of rtl + generation. The function must meet certain criteria, currently + related to the size of the function and the types and number of + parameters it has. Note that this function may contain loops, + recursive calls to itself (tail-recursive functions can be + inlined!), gotos, in short, all constructs supported by GNU CC. + The file `integrate.c' contains the code to save a function's rtl + for later inlining and to inline that rtl when the function is + called. The header file `integrate.h' is also used for this + purpose. + + The option `-dr' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.rtl' to + the input file name. + + * Jump optimization. This pass simplifies jumps to the following + instruction, jumps across jumps, and jumps to jumps. It deletes + unreferenced labels and unreachable code, except that unreachable + code that contains a loop is not recognized as unreachable in this + pass. (Such loops are deleted later in the basic block analysis.) + It also converts some code originally written with jumps into + sequences of instructions that directly set values from the + results of comparisons, if the machine has such instructions. + + Jump optimization is performed two or three times. The first time + is immediately following RTL generation. The second time is after + CSE, but only if CSE says repeated jump optimization is needed. + The last time is right before the final pass. That time, + cross-jumping and deletion of no-op move instructions are done + together with the optimizations described above. + + The source file of this pass is `jump.c'. + + The option `-dj' causes a debugging dump of the RTL code after + this pass is run for the first time. This dump file's name is + made by appending `.jump' to the input file name. + + * Register scan. This pass finds the first and last use of each + register, as a guide for common subexpression elimination. Its + source is in `regclass.c'. + + * Jump threading. This pass detects a condition jump that branches + to an identical or inverse test. Such jumps can be `threaded' + through the second conditional test. The source code for this + pass is in `jump.c'. This optimization is only performed if + `-fthread-jumps' is enabled. + + * Common subexpression elimination. This pass also does constant + propagation. Its source file is `cse.c'. If constant propagation + causes conditional jumps to become unconditional or to become + no-ops, jump optimization is run again when CSE is finished. + + The option `-ds' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.cse' to + the input file name. + + * Loop optimization. This pass moves constant expressions out of + loops, and optionally does strength-reduction and loop unrolling + as well. Its source files are `loop.c' and `unroll.c', plus the + header `loop.h' used for communication between them. Loop + unrolling uses some functions in `integrate.c' and the header + `integrate.h'. + + The option `-dL' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.loop' to + the input file name. + + * If `-frerun-cse-after-loop' was enabled, a second common + subexpression elimination pass is performed after the loop + optimization pass. Jump threading is also done again at this time + if it was specified. + + The option `-dt' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.cse2' to + the input file name. + + * Stupid register allocation is performed at this point in a + nonoptimizing compilation. It does a little data flow analysis as + well. When stupid register allocation is in use, the next pass + executed is the reloading pass; the others in between are skipped. + The source file is `stupid.c'. + + * Data flow analysis (`flow.c'). This pass divides the program into + basic blocks (and in the process deletes unreachable loops); then + it computes which pseudo-registers are live at each point in the + program, and makes the first instruction that uses a value point at + the instruction that computed the value. + + This pass also deletes computations whose results are never used, + and combines memory references with add or subtract instructions + to make autoincrement or autodecrement addressing. + + The option `-df' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.flow' to + the input file name. If stupid register allocation is in use, this + dump file reflects the full results of such allocation. + + * Instruction combination (`combine.c'). This pass attempts to + combine groups of two or three instructions that are related by + data flow into single instructions. It combines the RTL + expressions for the instructions by substitution, simplifies the + result using algebra, and then attempts to match the result + against the machine description. + + The option `-dc' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.combine' + to the input file name. + + * Instruction scheduling (`sched.c'). This pass looks for + instructions whose output will not be available by the time that + it is used in subsequent instructions. (Memory loads and floating + point instructions often have this behavior on RISC machines). It + re-orders instructions within a basic block to try to separate the + definition and use of items that otherwise would cause pipeline + stalls. + + Instruction scheduling is performed twice. The first time is + immediately after instruction combination and the second is + immediately after reload. + + The option `-dS' causes a debugging dump of the RTL code after this + pass is run for the first time. The dump file's name is made by + appending `.sched' to the input file name. + + * Register class preferencing. The RTL code is scanned to find out + which register class is best for each pseudo register. The source + file is `regclass.c'. + + * Local register allocation (`local-alloc.c'). This pass allocates + hard registers to pseudo registers that are used only within one + basic block. Because the basic block is linear, it can use fast + and powerful techniques to do a very good job. + + The option `-dl' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.lreg' to + the input file name. + + * Global register allocation (`global.c'). This pass allocates hard + registers for the remaining pseudo registers (those whose life + spans are not contained in one basic block). + + * Reloading. This pass renumbers pseudo registers with the hardware + registers numbers they were allocated. Pseudo registers that did + not get hard registers are replaced with stack slots. Then it + finds instructions that are invalid because a value has failed to + end up in a register, or has ended up in a register of the wrong + kind. It fixes up these instructions by reloading the + problematical values temporarily into registers. Additional + instructions are generated to do the copying. + + The reload pass also optionally eliminates the frame pointer and + inserts instructions to save and restore call-clobbered registers + around calls. + + Source files are `reload.c' and `reload1.c', plus the header + `reload.h' used for communication between them. + + The option `-dg' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.greg' to + the input file name. + + * Instruction scheduling is repeated here to try to avoid pipeline + stalls due to memory loads generated for spilled pseudo registers. + + The option `-dR' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.sched2' + to the input file name. + + * Jump optimization is repeated, this time including cross-jumping + and deletion of no-op move instructions. + + The option `-dJ' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.jump2' to + the input file name. + + * Delayed branch scheduling. This optional pass attempts to find + instructions that can go into the delay slots of other + instructions, usually jumps and calls. The source file name is + `reorg.c'. + + The option `-dd' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.dbr' to + the input file name. + + * Conversion from usage of some hard registers to usage of a register + stack may be done at this point. Currently, this is supported only + for the floating-point registers of the Intel 80387 coprocessor. + The source file name is `reg-stack.c'. + + The options `-dk' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.stack' to + the input file name. + + * Final. This pass outputs the assembler code for the function. It + is also responsible for identifying spurious test and compare + instructions. Machine-specific peephole optimizations are + performed at the same time. The function entry and exit sequences + are generated directly as assembler code in this pass; they never + exist as RTL. + + The source files are `final.c' plus `insn-output.c'; the latter is + generated automatically from the machine description by the tool + `genoutput'. The header file `conditions.h' is used for + communication between these files. + + * Debugging information output. This is run after final because it + must output the stack slot offsets for pseudo registers that did + not get hard registers. Source files are `dbxout.c' for DBX + symbol table format, `sdbout.c' for SDB symbol table format, and + `dwarfout.c' for DWARF symbol table format. + + Some additional files are used by all or many passes: + + * Every pass uses `machmode.def' and `machmode.h' which define the + machine modes. + + * Several passes use `real.h', which defines the default + representation of floating point constants and how to operate on + them. + + * All the passes that work with RTL use the header files `rtl.h' and + `rtl.def', and subroutines in file `rtl.c'. The tools `gen*' also + use these files to read and work with the machine description RTL. + + * Several passes refer to the header file `insn-config.h' which + contains a few parameters (C macro definitions) generated + automatically from the machine description RTL by the tool + `genconfig'. + + * Several passes use the instruction recognizer, which consists of + `recog.c' and `recog.h', plus the files `insn-recog.c' and + `insn-extract.c' that are generated automatically from the machine + description by the tools `genrecog' and `genextract'. + + * Several passes use the header files `regs.h' which defines the + information recorded about pseudo register usage, and + `basic-block.h' which defines the information recorded about basic + blocks. + + * `hard-reg-set.h' defines the type `HARD_REG_SET', a bit-vector + with a bit for each hard register, and some macros to manipulate + it. This type is just `int' if the machine has few enough hard + registers; otherwise it is an array of `int' and some of the + macros expand into loops. + + * Several passes use instruction attributes. A definition of the + attributes defined for a particular machine is in file + `insn-attr.h', which is generated from the machine description by + the program `genattr'. The file `insn-attrtab.c' contains + subroutines to obtain the attribute values for insns. It is + generated from the machine description by the program `genattrtab'.  -File: gcc.info, Node: Insn Attributes, Prev: Insn Splitting, Up: Machine Desc +File: gcc.info, Node: RTL, Next: Machine Desc, Prev: Passes, Up: Top -Instruction Attributes -====================== +RTL Representation +****************** - In addition to describing the instruction supported by the target -machine, the `md' file also defines a group of "attributes" and a set -of values for each. Every generated insn is assigned a value for each -attribute. One possible attribute would be the effect that the insn -has on the machine's condition code. This attribute can then be used -by `NOTICE_UPDATE_CC' to track the condition codes. + Most of the work of the compiler is done on an intermediate +representation called register transfer language. In this language, +the instructions to be output are described, pretty much one by one, in +an algebraic form that describes what the instruction does. + + RTL is inspired by Lisp lists. It has both an internal form, made +up of structures that point at other structures, and a textual form +that is used in the machine description and in printed debugging dumps. +The textual form uses nested parentheses to indicate the pointers in +the internal form. * Menu: -* Defining Attributes:: Specifying attributes and their values. -* Expressions:: Valid expressions for attribute values. -* Tagging Insns:: Assigning attribute values to insns. -* Attr Example:: An example of assigning attributes. -* Insn Lengths:: Computing the length of insns. -* Delay Slots:: Defining delay slots required for a machine. -* Function Units:: Specifying information for insn scheduling. - - -File: gcc.info, Node: Defining Attributes, Next: Expressions, Prev: Insn Attributes, Up: Insn Attributes - -Defining Attributes and their Values ------------------------------------- - - The `define_attr' expression is used to define each attribute -required by the target machine. It looks like: - - (define_attr NAME LIST-OF-VALUES DEFAULT) - - NAME is a string specifying the name of the attribute being defined. - - LIST-OF-VALUES is either a string that specifies a comma-separated -list of values that can be assigned to the attribute, or a null string -to indicate that the attribute takes numeric values. - - DEFAULT is an attribute expression that gives the value of this -attribute for insns that match patterns whose definition does not -include an explicit value for this attribute. *Note Attr Example::, -for more information on the handling of defaults. - - For each defined attribute, a number of definitions are written to -the `insn-attr.h' file. For cases where an explicit set of values is -specified for an attribute, the following are defined: - - * A `#define' is written for the symbol `HAVE_ATTR_NAME'. - - * An enumeral class is defined for `attr_NAME' with elements of the - form `UPPER-NAME_UPPER-VALUE' where the attribute name and value - are first converted to upper case. - - * A function `get_attr_NAME' is defined that is passed an insn and - returns the attribute value for that insn. - - For example, if the following is present in the `md' file: - - (define_attr "type" "branch,fp,load,store,arith" ...) - -the following lines will be written to the file `insn-attr.h'. - - #define HAVE_ATTR_type - enum attr_type {TYPE_BRANCH, TYPE_FP, TYPE_LOAD, - TYPE_STORE, TYPE_ARITH}; - extern enum attr_type get_attr_type (); - - If the attribute takes numeric values, no `enum' type will be -defined and the function to obtain the attribute's value will return -`int'. +* RTL Objects:: Expressions vs vectors vs strings vs integers. +* Accessors:: Macros to access expression operands or vector elts. +* Flags:: Other flags in an RTL expression. +* Machine Modes:: Describing the size and format of a datum. +* Constants:: Expressions with constant values. +* Regs and Memory:: Expressions representing register contents or memory. +* Arithmetic:: Expressions representing arithmetic on other expressions. +* Comparisons:: Expressions representing comparison of expressions. +* Bit Fields:: Expressions representing bitfields in memory or reg. +* Conversions:: Extending, truncating, floating or fixing. +* RTL Declarations:: Declaring volatility, constancy, etc. +* Side Effects:: Expressions for storing in registers, etc. +* Incdec:: Embedded side-effects for autoincrement addressing. +* Assembler:: Representing `asm' with operands. +* Insns:: Expression types for entire insns. +* Calls:: RTL representation of function call insns. +* Sharing:: Some expressions are unique; others *must* be copied. +* Reading RTL:: Reading textual RTL from a file.  -File: gcc.info, Node: Expressions, Next: Tagging Insns, Prev: Defining Attributes, Up: Insn Attributes - -Attribute Expressions ---------------------- +File: gcc.info, Node: RTL Objects, Next: Accessors, Prev: RTL, Up: RTL - RTL expressions used to define attributes use the codes described -above plus a few specific to attribute definitions, to be discussed -below. Attribute value expressions must have one of the following -forms: +RTL Object Types +================ -`(const_int I)' - The integer I specifies the value of a numeric attribute. I must - be non-negative. + RTL uses five kinds of objects: expressions, integers, wide integers, +strings and vectors. Expressions are the most important ones. An RTL +expression ("RTX", for short) is a C structure, but it is usually +referred to with a pointer; a type that is given the typedef name `rtx'. + + An integer is simply an `int'; their written form uses decimal +digits. A wide integer is an integral object whose type is +`HOST_WIDE_INT' (*note Config::.); their written form uses decimal +digits. + + A string is a sequence of characters. In core it is represented as a +`char *' in usual C fashion, and it is written in C syntax as well. +However, strings in RTL may never be null. If you write an empty +string in a machine description, it is represented in core as a null +pointer rather than as a pointer to a null character. In certain +contexts, these null pointers instead of strings are valid. Within RTL +code, strings are most commonly found inside `symbol_ref' expressions, +but they appear in other contexts in the RTL expressions that make up +machine descriptions. + + A vector contains an arbitrary number of pointers to expressions. +The number of elements in the vector is explicitly present in the +vector. The written form of a vector consists of square brackets +(`[...]') surrounding the elements, in sequence and with whitespace +separating them. Vectors of length zero are not created; null pointers +are used instead. + + Expressions are classified by "expression codes" (also called RTX +codes). The expression code is a name defined in `rtl.def', which is +also (in upper case) a C enumeration constant. The possible expression +codes and their meanings are machine-independent. The code of an RTX +can be extracted with the macro `GET_CODE (X)' and altered with +`PUT_CODE (X, NEWCODE)'. + + The expression code determines how many operands the expression +contains, and what kinds of objects they are. In RTL, unlike Lisp, you +cannot tell by looking at an operand what kind of object it is. +Instead, you must know from its context--from the expression code of +the containing expression. For example, in an expression of code +`subreg', the first operand is to be regarded as an expression and the +second operand as an integer. In an expression of code `plus', there +are two operands, both of which are to be regarded as expressions. In +a `symbol_ref' expression, there is one operand, which is to be +regarded as a string. + + Expressions are written as parentheses containing the name of the +expression type, its flags and machine mode if any, and then the +operands of the expression (separated by spaces). + + Expression code names in the `md' file are written in lower case, +but when they appear in C code they are written in upper case. In this +manual, they are shown as follows: `const_int'. - The value of a numeric attribute can be specified either with a - `const_int' or as an integer represented as a string in - `const_string', `eq_attr' (see below), and `set_attr' (*note - Tagging Insns::.) expressions. - -`(const_string VALUE)' - The string VALUE specifies a constant attribute value. If VALUE - is specified as `"*"', it means that the default value of the - attribute is to be used for the insn containing this expression. - `"*"' obviously cannot be used in the DEFAULT expression of a - `define_attr'. - - If the attribute whose value is being specified is numeric, VALUE - must be a string containing a non-negative integer (normally - `const_int' would be used in this case). Otherwise, it must - contain one of the valid values for the attribute. - -`(if_then_else TEST TRUE-VALUE FALSE-VALUE)' - TEST specifies an attribute test, whose format is defined below. - The value of this expression is TRUE-VALUE if TEST is true, - otherwise it is FALSE-VALUE. - -`(cond [TEST1 VALUE1 ...] DEFAULT)' - The first operand of this expression is a vector containing an - even number of expressions and consisting of pairs of TEST and - VALUE expressions. The value of the `cond' expression is that of - the VALUE corresponding to the first true TEST expression. If - none of the TEST expressions are true, the value of the `cond' - expression is that of the DEFAULT expression. - - TEST expressions can have one of the following forms: - -`(const_int I)' - This test is true if I is non-zero and false otherwise. - -`(not TEST)' -`(ior TEST1 TEST2)' -`(and TEST1 TEST2)' - These tests are true if the indicated logical function is true. - -`(match_operand:M N PRED CONSTRAINTS)' - This test is true if operand N of the insn whose attribute value - is being determined has mode M (this part of the test is ignored - if M is `VOIDmode') and the function specified by the string PRED - returns a non-zero value when passed operand N and mode M (this - part of the test is ignored if PRED is the null string). - - The CONSTRAINTS operand is ignored and should be the null string. - -`(le ARITH1 ARITH2)' -`(leu ARITH1 ARITH2)' -`(lt ARITH1 ARITH2)' -`(ltu ARITH1 ARITH2)' -`(gt ARITH1 ARITH2)' -`(gtu ARITH1 ARITH2)' -`(ge ARITH1 ARITH2)' -`(geu ARITH1 ARITH2)' -`(ne ARITH1 ARITH2)' -`(eq ARITH1 ARITH2)' - These tests are true if the indicated comparison of the two - arithmetic expressions is true. Arithmetic expressions are - formed with `plus', `minus', `mult', `div', `mod', `abs', `neg', - `and', `ior', `xor', `not', `lshift', `ashift', `lshiftrt', and - `ashiftrt' expressions. - - `const_int' and `symbol_ref' are always valid terms (*note Insn - Lengths::.,for additional forms). `symbol_ref' is a string - denoting a C expression that yields an `int' when evaluated by the - `get_attr_...' routine. It should normally be a global variable. - -`(eq_attr NAME VALUE)' - NAME is a string specifying the name of an attribute. - - VALUE is a string that is either a valid value for attribute - NAME, a comma-separated list of values, or `!' followed by a - value or list. If VALUE does not begin with a `!', this test is - true if the value of the NAME attribute of the current insn is in - the list specified by VALUE. If VALUE begins with a `!', this - test is true if the attribute's value is *not* in the specified - list. - - For example, - - (eq_attr "type" "load,store") - - is equivalent to - - (ior (eq_attr "type" "load") (eq_attr "type" "store")) - - If NAME specifies an attribute of `alternative', it refers to the - value of the compiler variable `which_alternative' (*note Output - Statement::.) and the values must be small integers. For example, - - (eq_attr "alternative" "2,3") - - is equivalent to - - (ior (eq (symbol_ref "which_alternative") (const_int 2)) - (eq (symbol_ref "which_alternative") (const_int 3))) - - Note that, for most attributes, an `eq_attr' test is simplified - in cases where the value of the attribute being tested is known - for all insns matching a particular pattern. This is by far the - most common case. + In a few contexts a null pointer is valid where an expression is +normally wanted. The written form of this is `(nil)'.  -File: gcc.info, Node: Tagging Insns, Next: Attr Example, Prev: Expressions, Up: Insn Attributes +File: gcc.info, Node: Accessors, Next: Flags, Prev: RTL Objects, Up: RTL -Assigning Attribute Values to Insns ------------------------------------ +Access to Operands +================== - The value assigned to an attribute of an insn is primarily -determined by which pattern is matched by that insn (or which -`define_peephole' generated it). Every `define_insn' and -`define_peephole' can have an optional last argument to specify the -values of attributes for matching insns. The value of any attribute -not specified in a particular insn is set to the default value for -that attribute, as specified in its `define_attr'. Extensive use of -default values for attributes permits the specification of the values -for only one or two attributes in the definition of most insn -patterns, as seen in the example in the next section. - - The optional last argument of `define_insn' and `define_peephole' -is a vector of expressions, each of which defines the value for a -single attribute. The most general way of assigning an attribute's -value is to use a `set' expression whose first operand is an `attr' -expression giving the name of the attribute being set. The second -operand of the `set' is an attribute expression (*note Expressions::.) -giving the value of the attribute. - - When the attribute value depends on the `alternative' attribute -(i.e., which is the applicable alternative in the constraint of the -insn), the `set_attr_alternative' expression can can be used. It -allows the specification of a vector of attribute expressions, one for -each alternative. - - When the generality of arbitrary attribute expressions is not -required, the simpler `set_attr' expression can be used, which allows -specifying a string giving either a single attribute value or a list -of attribute values, one for each alternative. - - The form of each of the above specifications is shown below. In -each case, NAME is a string specifying the attribute to be set. - -`(set_attr NAME VALUE-STRING)' - VALUE-STRING is either a string giving the desired attribute - value, or a string containing a comma-separated list giving the - values for succeeding alternatives. The number of elements must - match the number of alternatives in the constraint of the insn - pattern. - - Note that it may be useful to specify `*' for some alternative, in - which case the attribute will assume its default value for insns - matching that alternative. - -`(set_attr_alternative NAME [VALUE1 VALUE2 ...])' - Depending on the alternative of the insn, the value will be one - of the specified values. This is a shorthand for using a `cond' - with tests on the `alternative' attribute. - -`(set (attr NAME) VALUE)' - The first operand of this `set' must be the special RTL expression - `attr', whose sole operand is a string giving the name of the - attribute being set. VALUE is the value of the attribute. - - The following shows three different ways of representing the same -attribute value specification: - - (set_attr "type" "load,store,arith") - - (set_attr_alternative "type" - [(const_string "load") (const_string "store") - (const_string "arith")]) - - (set (attr "type") - (cond [(eq_attr "alternative" "1") (const_string "load") - (eq_attr "alternative" "2") (const_string "store")] - (const_string "arith"))) - - The `define_asm_attributes' expression provides a mechanism to -specify the attributes assigned to insns produced from an `asm' -statement. It has the form: - - (define_asm_attributes [ATTR-SETS]) - -where ATTR-SETS is specified the same as for `define_insn' and -`define_peephole' expressions. - - These values will typically be the "worst case" attribute values. -For example, they might indicate that the condition code will be -clobbered. - - A specification for a `length' attribute is handled specially. To -compute the length of an `asm' insn, the length specified in the -`define_asm_attributes' expression is multiplied by the number of -machine instructions specified in the `asm' statement, determined by -counting the number of semicolons and newlines in the string. -Therefore, the value of the `length' attribute specified in a -`define_asm_attributes' should be the maximum possible length of a -single machine instruction. + For each expression type `rtl.def' specifies the number of contained +objects and their kinds, with four possibilities: `e' for expression +(actually a pointer to an expression), `i' for integer, `w' for wide +integer, `s' for string, and `E' for vector of expressions. The +sequence of letters for an expression code is called its "format". +Thus, the format of `subreg' is `ei'. + + A few other format characters are used occasionally: + +`u' + `u' is equivalent to `e' except that it is printed differently in + debugging dumps. It is used for pointers to insns. + +`n' + `n' is equivalent to `i' except that it is printed differently in + debugging dumps. It is used for the line number or code number of + a `note' insn. + +`S' + `S' indicates a string which is optional. In the RTL objects in + core, `S' is equivalent to `s', but when the object is read, from + an `md' file, the string value of this operand may be omitted. An + omitted string is taken to be the null string. + +`V' + `V' indicates a vector which is optional. In the RTL objects in + core, `V' is equivalent to `E', but when the object is read from + an `md' file, the vector value of this operand may be omitted. An + omitted vector is effectively the same as a vector of no elements. + +`0' + `0' means a slot whose contents do not fit any normal category. + `0' slots are not printed at all in dumps, and are often used in + special ways by small parts of the compiler. + + There are macros to get the number of operands, the format, and the +class of an expression code: + +`GET_RTX_LENGTH (CODE)' + Number of operands of an RTX of code CODE. + +`GET_RTX_FORMAT (CODE)' + The format of an RTX of code CODE, as a C string. + +`GET_RTX_CLASS (CODE)' + A single character representing the type of RTX operation that code + CODE performs. + + The following classes are defined: + + `o' + An RTX code that represents an actual object, such as `reg' or + `mem'. `subreg' is not in this class. + + `<' + An RTX code for a comparison. The codes in this class are + `NE', `EQ', `LE', `LT', `GE', `GT', `LEU', `LTU', `GEU', + `GTU'. + + `1' + An RTX code for a unary arithmetic operation, such as `neg'. + + `c' + An RTX code for a commutative binary operation, other than + `NE' and `EQ' (which have class `<'). + + `2' + An RTX code for a noncommutative binary operation, such as + `MINUS'. + + `b' + An RTX code for a bitfield operation, either `ZERO_EXTRACT' or + `SIGN_EXTRACT'. + + `3' + An RTX code for other three input operations, such as + `IF_THEN_ELSE'. + + `i' + An RTX code for a machine insn (`INSN', `JUMP_INSN', and + `CALL_INSN'). + + `m' + An RTX code for something that matches in insns, such as + `MATCH_DUP'. + + `x' + All other RTX codes. + + Operands of expressions are accessed using the macros `XEXP', +`XINT', `XWINT' and `XSTR'. Each of these macros takes two arguments: +an expression-pointer (RTX) and an operand number (counting from zero). +Thus, + + XEXP (X, 2) + +accesses operand 2 of expression X, as an expression. + + XINT (X, 2) + +accesses the same operand as an integer. `XSTR', used in the same +fashion, would access it as a string. + + Any operand can be accessed as an integer, as an expression or as a +string. You must choose the correct method of access for the kind of +value actually stored in the operand. You would do this based on the +expression code of the containing expression. That is also how you +would know how many operands there are. + + For example, if X is a `subreg' expression, you know that it has two +operands which can be correctly accessed as `XEXP (X, 0)' and `XINT (X, +1)'. If you did `XINT (X, 0)', you would get the address of the +expression operand but cast as an integer; that might occasionally be +useful, but it would be cleaner to write `(int) XEXP (X, 0)'. `XEXP +(X, 1)' would also compile without error, and would return the second, +integer operand cast as an expression pointer, which would probably +result in a crash when accessed. Nothing stops you from writing `XEXP +(X, 28)' either, but this will access memory past the end of the +expression with unpredictable results. + + Access to operands which are vectors is more complicated. You can +use the macro `XVEC' to get the vector-pointer itself, or the macros +`XVECEXP' and `XVECLEN' to access the elements and length of a vector. + +`XVEC (EXP, IDX)' + Access the vector-pointer which is operand number IDX in EXP. + +`XVECLEN (EXP, IDX)' + Access the length (number of elements) in the vector which is in + operand number IDX in EXP. This value is an `int'. + +`XVECEXP (EXP, IDX, ELTNUM)' + Access element number ELTNUM in the vector which is in operand + number IDX in EXP. This value is an RTX. + + It is up to you to make sure that ELTNUM is not negative and is + less than `XVECLEN (EXP, IDX)'. + + All the macros defined in this section expand into lvalues and +therefore can be used to assign the operands, lengths and vector +elements as well as to access them.  -File: gcc.info, Node: Attr Example, Next: Insn Lengths, Prev: Tagging Insns, Up: Insn Attributes +File: gcc.info, Node: Flags, Next: Machine Modes, Prev: Accessors, Up: RTL -Example of Attribute Specifications ------------------------------------ +Flags in an RTL Expression +========================== - The judicious use of defaulting is important in the efficient use of -insn attributes. Typically, insns are divided into "types" and an -attribute, customarily called `type', is used to represent this value. - This attribute is normally used only to define the default value for -other attributes. An example will clarify this usage. - - Assume we have a RISC machine with a condition code and in which -only full-word operations are performed in registers. Let us assume -that we can divide all insns into loads, stores, (integer) arithmetic -operations, floating point operations, and branches. - - Here we will concern ourselves with determining the effect of an -insn on the condition code and will limit ourselves to the following -possible effects: The condition code can be set unpredictably -(clobbered), not be changed, be set to agree with the results of the -operation, or only changed if the item previously set into the -condition code has been modified. - - Here is part of a sample `md' file for such a machine: - - (define_attr "type" "load,store,arith,fp,branch" (const_string "arith")) - - (define_attr "cc" "clobber,unchanged,set,change0" - (cond [(eq_attr "type" "load") - (const_string "change0") - (eq_attr "type" "store,branch") - (const_string "unchanged") - (eq_attr "type" "arith") - (if_then_else (match_operand:SI 0 "" "") - (const_string "set") - (const_string "clobber"))] - (const_string "clobber"))) - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r,r,m") - (match_operand:SI 1 "general_operand" "r,m,r"))] - "" - "@ - move %0,%1 - load %0,%1 - store %0,%1" - [(set_attr "type" "arith,load,store")]) - - Note that we assume in the above example that arithmetic operations -performed on quantities smaller than a machine word clobber the -condition code since they will set the condition code to a value -corresponding to the full-word result. + RTL expressions contain several flags (one-bit bitfields) that are +used in certain types of expression. Most often they are accessed with +the following macros: + +`MEM_VOLATILE_P (X)' + In `mem' expressions, nonzero for volatile memory references. + Stored in the `volatil' field and printed as `/v'. + +`MEM_IN_STRUCT_P (X)' + In `mem' expressions, nonzero for reference to an entire + structure, union or array, or to a component of one. Zero for + references to a scalar variable or through a pointer to a scalar. + Stored in the `in_struct' field and printed as `/s'. + +`REG_LOOP_TEST_P' + In `reg' expressions, nonzero if this register's entire life is + contained in the exit test code for some loop. Stored in the + `in_struct' field and printed as `/s'. + +`REG_USERVAR_P (X)' + In a `reg', nonzero if it corresponds to a variable present in the + user's source code. Zero for temporaries generated internally by + the compiler. Stored in the `volatil' field and printed as `/v'. + +`REG_FUNCTION_VALUE_P (X)' + Nonzero in a `reg' if it is the place in which this function's + value is going to be returned. (This happens only in a hard + register.) Stored in the `integrated' field and printed as `/i'. + + The same hard register may be used also for collecting the values + of functions called by this one, but `REG_FUNCTION_VALUE_P' is zero + in this kind of use. + +`SUBREG_PROMOTED_VAR_P' + Nonzero in a `subreg' if it was made when accessing an object that + was promoted to a wider mode in accord with the `PROMOTED_MODE' + machine description macro (*note Storage Layout::.). In this + case, the mode of the `subreg' is the declared mode of the object + and the mode of `SUBREG_REG' is the mode of the register that + holds the object. Promoted variables are always either sign- or + zero-extended to the wider mode on every assignment. Stored in + the `in_struct' field and printed as `/s'. + +`SUBREG_PROMOTED_UNSIGNED_P' + Nonzero in a `subreg' that has `SUBREG_PROMOTED_VAR_P' nonzero if + the object being referenced is kept zero-extended and zero if it + is kept sign-extended. Stored in the `unchanging' field and + printed as `/u'. + +`RTX_UNCHANGING_P (X)' + Nonzero in a `reg' or `mem' if the value is not changed. (This + flag is not set for memory references via pointers to constants. + Such pointers only guarantee that the object will not be changed + explicitly by the current function. The object might be changed by + other functions or by aliasing.) Stored in the `unchanging' field + and printed as `/u'. + +`RTX_INTEGRATED_P (INSN)' + Nonzero in an insn if it resulted from an in-line function call. + Stored in the `integrated' field and printed as `/i'. This may be + deleted; nothing currently depends on it. + +`SYMBOL_REF_USED (X)' + In a `symbol_ref', indicates that X has been used. This is + normally only used to ensure that X is only declared external + once. Stored in the `used' field. + +`SYMBOL_REF_FLAG (X)' + In a `symbol_ref', this is used as a flag for machine-specific + purposes. Stored in the `volatil' field and printed as `/v'. + +`LABEL_OUTSIDE_LOOP_P' + In `label_ref' expressions, nonzero if this is a reference to a + label that is outside the innermost loop containing the reference + to the label. Stored in the `in_struct' field and printed as `/s'. + +`INSN_DELETED_P (INSN)' + In an insn, nonzero if the insn has been deleted. Stored in the + `volatil' field and printed as `/v'. + +`INSN_ANNULLED_BRANCH_P (INSN)' + In an `insn' in the delay slot of a branch insn, indicates that an + annulling branch should be used. See the discussion under + `sequence' below. Stored in the `unchanging' field and printed as + `/u'. + +`INSN_FROM_TARGET_P (INSN)' + In an `insn' in a delay slot of a branch, indicates that the insn + is from the target of the branch. If the branch insn has + `INSN_ANNULLED_BRANCH_P' set, this insn should only be executed if + the branch is taken. For annulled branches with this bit clear, + the insn should be executed only if the branch is not taken. + Stored in the `in_struct' field and printed as `/s'. + +`CONSTANT_POOL_ADDRESS_P (X)' + Nonzero in a `symbol_ref' if it refers to part of the current + function's "constants pool". These are addresses close to the + beginning of the function, and GNU CC assumes they can be addressed + directly (perhaps with the help of base registers). Stored in the + `unchanging' field and printed as `/u'. + +`CONST_CALL_P (X)' + In a `call_insn', indicates that the insn represents a call to a + const function. Stored in the `unchanging' field and printed as + `/u'. + +`LABEL_PRESERVE_P (X)' + In a `code_label', indicates that the label can never be deleted. + Labels referenced by a non-local goto will have this bit set. + Stored in the `in_struct' field and printed as `/s'. + +`SCHED_GROUP_P (INSN)' + During instruction scheduling, in an insn, indicates that the + previous insn must be scheduled together with this insn. This is + used to ensure that certain groups of instructions will not be + split up by the instruction scheduling pass, for example, `use' + insns before a `call_insn' may not be separated from the + `call_insn'. Stored in the `in_struct' field and printed as `/s'. + + These are the fields which the above macros refer to: + +`used' + Normally, this flag is used only momentarily, at the end of RTL + generation for a function, to count the number of times an + expression appears in insns. Expressions that appear more than + once are copied, according to the rules for shared structure + (*note Sharing::.). + + In a `symbol_ref', it indicates that an external declaration for + the symbol has already been written. + + In a `reg', it is used by the leaf register renumbering code to + ensure that each register is only renumbered once. + +`volatil' + This flag is used in `mem', `symbol_ref' and `reg' expressions and + in insns. In RTL dump files, it is printed as `/v'. + + In a `mem' expression, it is 1 if the memory reference is volatile. + Volatile memory references may not be deleted, reordered or + combined. + + In a `symbol_ref' expression, it is used for machine-specific + purposes. + + In a `reg' expression, it is 1 if the value is a user-level + variable. 0 indicates an internal compiler temporary. + + In an insn, 1 means the insn has been deleted. + +`in_struct' + In `mem' expressions, it is 1 if the memory datum referred to is + all or part of a structure or array; 0 if it is (or might be) a + scalar variable. A reference through a C pointer has 0 because + the pointer might point to a scalar variable. This information + allows the compiler to determine something about possible cases of + aliasing. + + In an insn in the delay slot of a branch, 1 means that this insn + is from the target of the branch. + + During instruction scheduling, in an insn, 1 means that this insn + must be scheduled as part of a group together with the previous + insn. + + In `reg' expressions, it is 1 if the register has its entire life + contained within the test expression of some loop. + + In `subreg' expressions, 1 means that the `subreg' is accessing an + object that has had its mode promoted from a wider mode. + + In `label_ref' expressions, 1 means that the referenced label is + outside the innermost loop containing the insn in which the + `label_ref' was found. + + In `code_label' expressions, it is 1 if the label may never be + deleted. This is used for labels which are the target of + non-local gotos. + + In an RTL dump, this flag is represented as `/s'. + +`unchanging' + In `reg' and `mem' expressions, 1 means that the value of the + expression never changes. + + In `subreg' expressions, it is 1 if the `subreg' references an + unsigned object whose mode has been promoted to a wider mode. + + In an insn, 1 means that this is an annulling branch. + + In a `symbol_ref' expression, 1 means that this symbol addresses + something in the per-function constants pool. + + In a `call_insn', 1 means that this instruction is a call to a + const function. + + In an RTL dump, this flag is represented as `/u'. + +`integrated' + In some kinds of expressions, including insns, this flag means the + rtl was produced by procedure integration. + + In a `reg' expression, this flag indicates the register containing + the value to be returned by the current function. On machines + that pass parameters in registers, the same register number may be + used for parameters as well, but this flag is not set on such uses.  -File: gcc.info, Node: Insn Lengths, Next: Delay Slots, Prev: Attr Example, Up: Insn Attributes - -Computing the Length of an Insn -------------------------------- - - For many machines, multiple types of branch instructions are -provided, each for different length branch displacements. In most -cases, the assembler will choose the correct instruction to use. -However, when the assembler cannot do so, GCC can when a special -attribute, the `length' attribute, is defined. This attribute must be -defined to have numeric values by specifying a null string in its -`define_attr'. - - In the case of the `length' attribute, two additional forms of -arithmetic terms are allowed in test expressions: - -`(match_dup N)' - This refers to the address of operand N of the current insn, which - must be a `label_ref'. - -`(pc)' - This refers to the address of the *current* insn. It might have - been more consistent with other usage to make this the address of - the *next* insn but this would be confusing because the length of - the current insn is to be computed. - - For normal insns, the length will be determined by value of the -`length' attribute. In the case of `addr_vec' and `addr_diff_vec' -insn patterns, the length will be computed as the number of vectors -multiplied by the size of each vector. - - The following macros can be used to refine the length computation: - -`FIRST_INSN_ADDRESS' - When the `length' insn attribute is used, this macro specifies the - value to be assigned to the address of the first insn in a - function. If not specified, 0 is used. - -`ADJUST_INSN_LENGTH (INSN, LENGTH)' - If defined, modifies the length assigned to instruction INSN as a - function of the context in which it is used. LENGTH is an lvalue - that contains the initially computed length of the insn and - should be updated with the correct length of the insn. If - updating is required, INSN must not be a varying-length insn. - - This macro will normally not be required. A case in which it is - required is the ROMP. On this machine, the size of an `addr_vec' - insn must be increased by two to compensate for the fact that - alignment may be required. - - The routine that returns the value of the `length' attribute, -`get_attr_value', can be used by the output routine to determine the -form of the branch instruction to be written, as the example below -illustrates. - - As an example of the specification of variable-length branches, -consider the IBM 360. If we adopt the convention that a register will -be set to the starting address of a function, we can jump to labels -within 4K of the start using a four-byte instruction. Otherwise, we -need a six-byte sequence to load the address from memory and then -branch to it. - - On such a machine, a pattern for a branch instruction might be -specified as follows: - - (define_insn "jump" - [(set (pc) - (label_ref (match_operand 0 "" "")))] - "" - "* - { - return (get_attr_length (insn) == 4 - ? \"b %l0\" : \"l r15,=a(%l0); br r15\"); - }" - [(set (attr "length") (if_then_else (lt (match_dup 0) (const_int 4096)) - (const_int 4) - (const_int 6)))]) - - -File: gcc.info, Node: Delay Slots, Next: Function Units, Prev: Insn Lengths, Up: Insn Attributes - -Delay Slot Scheduling ---------------------- - - The insn attribute mechanism can be used to specify the -requirements for delay slots, if any, on a target machine. An -instruction is said to require a "delay slot" if some instructions -that are physically after the instruction are executed as if they were -located before it. Classic examples are branch and call instructions, -which often execute the following instruction before the branch or -call is performed. - - On some machines, conditional branch instructions can optionally -"annul" instructions in the delay slot. This means that the -instruction will not be executed for certain branch outcomes. Both -instructions that annul if the branch is true and instructions that -annul if the branch is false are supported. - - Delay slot scheduling differs from instruction scheduling in that -determining whether an instruction needs a delay slot is dependent only -on the type of instruction being generated, not on data flow between -the instructions. See the next section for a discussion of -data-dependent instruction scheduling. - - The requirement of an insn needing one or more delay slots is -indicated via the `define_delay' expression. It has the following -form: - - (define_delay TEST - [DELAY-1 ANNUL-TRUE-1 ANNUL-FALSE-1 - DELAY-2 ANNUL-TRUE-2 ANNUL-FALSE-2 - ...]) - - TEST is an attribute test that indicates whether this -`define_delay' applies to a particular insn. If so, the number of -required delay slots is determined by the length of the vector -specified as the second argument. An insn placed in delay slot N must -satisfy attribute test DELAY-N. ANNUL-TRUE-N is an attribute test -that specifies which insns may be annulled if the branch is true. -Similarly, ANNUL-FALSE-N specifies which insns in the delay slot may -be annulled if the branch is false. If annulling is not supported for -that delay slot, `(nil)' should be coded. - - For example, in the common case where branch and call insns require -a single delay slot, which may contain any insn other than a branch or -call, the following would be placed in the `md' file: - - (define_delay (eq_attr "type" "branch,call") - [(eq_attr "type" "!branch,call") (nil) (nil)]) - - Multiple `define_delay' expressions may be specified. In this -case, each such expression specifies different delay slot requirements -and there must be no insn for which tests in two `define_delay' -expressions are both true. - - For example, if we have a machine that requires one delay slot for -branches but two for calls, no delay slot can contain a branch or -call insn, and any valid insn in the delay slot for the branch can be -annulled if the branch is true, we might represent this as follows: - - (define_delay (eq_attr "type" "branch") - [(eq_attr "type" "!branch,call") (eq_attr "type" "!branch,call") (nil)]) - - (define_delay (eq_attr "type" "call") - [(eq_attr "type" "!branch,call") (nil) (nil) - (eq_attr "type" "!branch,call") (nil) (nil)]) - - -File: gcc.info, Node: Function Units, Prev: Delay Slots, Up: Insn Attributes - -Specifying Function Units -------------------------- - - On most RISC machines, there are instructions whose results are not -available for a specific number of cycles. Common cases are -instructions that load data from memory. On many machines, a pipeline -stall will result if the data is referenced too soon after the load -instruction. - - In addition, many newer microprocessors have multiple function -units, usually one for integer and one for floating point, and often -will incur pipeline stalls when a result that is needed is not yet -ready. - - The descriptions in this section allow the specification of how much -time must elapse between the execution of an instruction and the time -when its result is used. It also allows specification of when the -execution of an instruction will delay execution of similar -instructions due to function unit conflicts. - - For the purposes of the specifications in this section, a machine is -divided into "function units", each of which execute a specific class -of instructions. Function units that accept one instruction each -cycle and allow a result to be used in the succeeding instruction -(usually via forwarding) need not be specified. Classic RISC -microprocessors will normally have a single function unit, which we can -call `memory'. The newer "superscalar" processors will often have -function units for floating point operations, usually at least a -floating point adder and multiplier. - - Each usage of a function units by a class of insns is specified -with a `define_function_unit' expression, which looks like this: - - (define_function_unit NAME MULTIPLICITY SIMULTANEITY - TEST READY-DELAY BUSY-DELAY - [CONFLICT-LIST]) - - NAME is a string giving the name of the function unit. - - MULTIPLICITY is an integer specifying the number of identical units -in the processor. If more than one unit is specified, they will be -scheduled independently. Only truly independent units should be -counted; a pipelined unit should be specified as a single unit. (The -only common example of a machine that has multiple function units for a -single instruction class that are truly independent and not pipelined -are the two multiply and two increment units of the CDC 6600.) - - SIMULTANEITY specifies the maximum number of insns that can be -executing in each instance of the function unit simultaneously or zero -if the unit is pipelined and has no limit. - - All `define_function_unit' definitions referring to function unit -NAME must have the same name and values for MULTIPLICITY and -SIMULTANEITY. - - TEST is an attribute test that selects the insns we are describing -in this definition. Note that an insn may use more than one function -unit and a function unit may be specified in more than one -`define_function_unit'. - - READY-DELAY is an integer that specifies the number of cycles after -which the result of the instruction can be used without introducing -any stalls. - - BUSY-DELAY is an integer that represents the default cost if an -insn is scheduled for this unit while the unit is active with another -insn. If SIMULTANEITY is zero, this specification is ignored. -Otherwise, a zero value indicates that these insns execute on NAME in -a fully pipelined fashion, even if SIMULTANEITY is non-zero. A -non-zero value indicates that scheduling a new insn on this unit while -another is active will incur a cost. A cost of two indicates a single -cycle delay. For a normal non-pipelined function unit, BUSY-DELAY -will be twice READY-DELAY. - - CONFLICT-LIST is an optional list giving detailed conflict costs -for this unit. If specified, it is a list of condition test -expressions which are applied to insns already executing in NAME. For -each insn that is in the list, BUSY-DELAY will be used for the conflict -cost, while a value of zero will be used for insns not in the list. - - Typical uses of this vector are where a floating point function -unit can pipeline either single- or double-precision operations, but -not both, or where a memory unit can pipeline loads, but not stores, -etc. - - As an example, consider a classic RISC machine where the result of a -load instruction is not available for two cycles (a single "delay" -instruction is required) and where only one load instruction can be -executed simultaneously. This would be specified as: - - (define_function_unit "memory" 1 1 (eq_attr "type" "load") 2 4) - - For the case of a floating point function unit that can pipeline -either single or double precision, but not both, the following could -be specified: - - (define_function_unit - "fp" 1 1 (eq_attr "type" "sp_fp") 4 8 (eq_attr "type" "dp_fp")] - (define_function_unit - "fp" 1 1 (eq_attr "type" "dp_fp") 4 8 (eq_attr "type" "sp_fp")] - - *Note:* No code currently exists to avoid function unit conflicts, -only data conflicts. Hence MULTIPLICITY, SIMULTANEITY, BUSY-COST, and -CONFLICT-LIST are currently ignored. When such code is written, it is -possible that the specifications for these values may be changed. It -has recently come to our attention that these specifications may not -allow modeling of some of the newer "superscalar" processors that have -insns using multiple pipelined units. These insns will cause a -potential conflict for the second unit used during their execution and -there is no way of representing that conflict. We welcome any -examples of how function unit conflicts work in such processors and -suggestions for their representation. - - -File: gcc.info, Node: Machine Macros, Next: Config, Prev: Machine Desc, Up: Top - -Machine Description Macros -************************** - - In addition to the file `MACHINE.md', a machine description -includes a C header file conventionally given the name `MACHINE.h'. -This header file defines numerous macros that convey the information -about the target machine that does not fit into the scheme of the -`.md' file. The file `tm.h' should be a link to `MACHINE.h'. The -header file `config.h' includes `tm.h' and most compiler source files -include `config.h'. - -* Menu: - -* Driver:: Controlling how the driver runs the compilation passes. -* Run-time Target:: Defining `-m' options like `-m68000' and `-m68020'. -* Storage Layout:: Defining sizes and alignments of data. -* Type Layout:: Defining sizes and properties of basic user data types. -* Registers:: Naming and describing the hardware registers. -* Register Classes:: Defining the classes of hardware registers. -* Stack and Calling:: Defining which way the stack grows and by how much. -* Varargs:: Defining the varargs macros. -* Trampolines:: Code set up at run time to enter a nested function. -* Library Calls:: Controlling how library routines are implicitly called. -* Addressing Modes:: Defining addressing modes valid for memory operands. -* Condition Code:: Defining how insns update the condition code. -* Costs:: Defining relative costs of different operations. -* Sections:: Dividing storage into text, data, and other sections. -* PIC:: Macros for position independent code. -* Assembler Format:: Defining how to write insns and pseudo-ops to output. -* Debugging Info:: Defining the format of debugging output. -* Cross-compilation:: Handling floating point for cross-compilers. -* Misc:: Everything else. - - -File: gcc.info, Node: Driver, Next: Run-time Target, Prev: Machine Macros, Up: Machine Macros - -Controlling the Compilation Driver, `gcc' -========================================= - -`SWITCH_TAKES_ARG (CHAR)' - A C expression which determines whether the option `-CHAR' takes - arguments. The value should be the number of arguments that - option takes--zero, for many options. - - By default, this macro is defined to handle the standard options - properly. You need not define it unless you wish to add - additional options which take arguments. - -`WORD_SWITCH_TAKES_ARG (NAME)' - A C expression which determines whether the option `-NAME' takes - arguments. The value should be the number of arguments that - option takes--zero, for many options. This macro rather than - `SWITCH_TAKES_ARG' is used for multi-character option names. - - By default, this macro is defined to handle the standard options - properly. You need not define it unless you wish to add - additional options which take arguments. - -`SWITCHES_NEED_SPACES' - A string-valued C expression which is nonempty if the linker - needs a space between the `-L' or `-o' option and its argument. - - If this macro is not defined, the default value is 0. - -`CPP_SPEC' - A C string constant that tells the GNU CC driver program options - to pass to CPP. It can also specify how to translate options you - give to GNU CC into options for GNU CC to pass to the CPP. +File: gcc.info, Node: Machine Modes, Next: Constants, Prev: Flags, Up: RTL - Do not define this macro if it does not need to do anything. +Machine Modes +============= -`SIGNED_CHAR_SPEC' - A C string constant that tells the GNU CC driver program options - to pass to CPP. By default, this macro is defined to pass the - option `-D__CHAR_UNSIGNED__' to CPP if `char' will be treated as - `unsigned char' by `cc1'. - - Do not define this macro unless you need to override the default - definition. - -`CC1_SPEC' - A C string constant that tells the GNU CC driver program options - to pass to `cc1'. It can also specify how to translate options - you give to GNU CC into options for GNU CC to pass to the `cc1'. - - Do not define this macro if it does not need to do anything. - -`CC1PLUS_SPEC' - A C string constant that tells the GNU CC driver program options - to pass to `cc1plus'. It can also specify how to translate - options you give to GNU CC into options for GNU CC to pass to the - `cc1plus'. - - Do not define this macro if it does not need to do anything. - -`ASM_SPEC' - A C string constant that tells the GNU CC driver program options - to pass to the assembler. It can also specify how to translate - options you give to GNU CC into options for GNU CC to pass to the - assembler. See the file `sun3.h' for an example of this. - - Do not define this macro if it does not need to do anything. - -`ASM_FINAL_SPEC' - A C string constant that tells the GNU CC driver program how to - run any programs which cleanup after the normal assembler. - Normally, this is not needed. See the file `mips.h' for an - example of this. - - Do not define this macro if it does not need to do anything. - -`LINK_SPEC' - A C string constant that tells the GNU CC driver program options - to pass to the linker. It can also specify how to translate - options you give to GNU CC into options for GNU CC to pass to the - linker. - - Do not define this macro if it does not need to do anything. - -`LIB_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `LIB_SPEC' is used at the end - of the command given to the linker. - - If this macro is not defined, a default is provided that loads - the standard C library from the usual place. See `gcc.c'. - -`STARTFILE_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `STARTFILE_SPEC' is used at - the very beginning of the command given to the linker. - - If this macro is not defined, a default is provided that loads the - standard C startup file from the usual place. See `gcc.c'. - -`ENDFILE_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `ENDFILE_SPEC' is used at the - very end of the command given to the linker. - - Do not define this macro if it does not need to do anything. - -`LINK_LIBGCC_SPECIAL' - Define this macro meaning that `gcc' should find the library - `libgcc.a' by hand, rather than passing the argument `-lgcc' to - tell the linker to do the search. - -`RELATIVE_PREFIX_NOT_LINKDIR' - Define this macro to tell `gcc' that it should only translate a - `-B' prefix into a `-L' linker option if the prefix indicates an - absolute file name. - -`STANDARD_EXEC_PREFIX' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/lib/gcc/' as the default - prefix to try when searching for the executable files of the - compiler. - -`MD_EXEC_PREFIX' - If defined, this macro is an additional prefix to try after - `STANDARD_EXEC_PREFIX'. `MD_EXEC_PREFIX' is not searched when - the `-b' option is used, or the compiler is built as a cross - compiler. - -`STANDARD_STARTFILE_PREFIX' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/lib/gcc/' as the default - prefix to try when searching for startup files such as `crt0.o'. - -`MD_STARTFILE_PREFIX' - If defined, this macro supplies an additional prefix to try after - the standard prefixes. `MD_EXEC_PREFIX' is not searched when the - `-b' option is used, or the compiler is built as a cross compiler. - -`LOCAL_INCLUDE_DIR' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/include' as the default prefix - to try when searching for local header files. `LOCAL_INCLUDE_DIR' - comes before `SYSTEM_INCLUDE_DIR' in the search order. - - Cross compilers do not use this macro and do not search either - `/usr/local/include' or its replacement. - -`SYSTEM_INCLUDE_DIR' - Define this macro as a C string constant if you wish to specify a - system-specific directory to search for header files before the - standard directory. `SYSTEM_INCLUDE_DIR' comes before - `STANDARD_INCLUDE_DIR' in the search order. - - Cross compilers do not use this macro and do not search the - directory specified. - -`STANDARD_INCLUDE_DIR' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/include' as the default prefix to - try when searching for header files. - - Cross compilers do not use this macro and do not search either - `/usr/include' or its replacement. - -`INCLUDE_DEFAULTS' - Define this macro if you wish to override the entire default - search path for include files. The default search path includes - `GPLUSPLUS_INCLUDE_DIR', `GCC_INCLUDE_DIR', `LOCAL_INCLUDE_DIR', - `SYSTEM_INCLUDE_DIR', and `STANDARD_INCLUDE_DIR'. In addition, - the macros `GPLUSPLUS_INCLUDE_DIR' and `GCC_INCLUDE_DIR' are - defined automatically by `Makefile', and specify private search - areas for GCC. The directory `GPLUSPLUS_INCLUDE_DIR' is used - only for C++ programs. - - The definition should be an initializer for an array of - structures. Each array element should have two elements: the - directory name (a string constant) and a flag for C++-only - directories. Mark the end of the array with a null element. For - example, here is the definition used for VMS: - - #define INCLUDE_DEFAULTS \ - { \ - { "GNU_GXX_INCLUDE:", 1}, \ - { "GNU_CC_INCLUDE:", 0}, \ - { "SYS$SYSROOT:[SYSLIB.]", 0}, \ - { ".", 0}, \ - { 0, 0} \ - } - - Here is the order of prefixes tried for exec files: - - 1. Any prefixes specified by the user with `-B'. - - 2. The environment variable `GCC_EXEC_PREFIX', if any. - - 3. The directories specified by the environment variable - `COMPILER_PATH'. - - 4. The macro `STANDARD_EXEC_PREFIX'. - - 5. `/usr/lib/gcc/'. - - 6. The macro `MD_EXEC_PREFIX', if any. - - Here is the order of prefixes tried for startfiles: - - 1. Any prefixes specified by the user with `-B'. - - 2. The environment variable `GCC_EXEC_PREFIX', if any. - - 3. The directories specified by the environment variable - `LIBRARY_PATH'. - - 4. The macro `STANDARD_EXEC_PREFIX'. - - 5. `/usr/lib/gcc/'. - - 6. The macro `MD_EXEC_PREFIX', if any. - - 7. The macro `MD_STARTFILE_PREFIX', if any. - - 8. The macro `STANDARD_STARTFILE_PREFIX'. - - 9. `/lib/'. - - 10. `/usr/lib/'. + A machine mode describes a size of data object and the +representation used for it. In the C code, machine modes are +represented by an enumeration type, `enum machine_mode', defined in +`machmode.def'. Each RTL expression has room for a machine mode and so +do certain kinds of tree expressions (declarations and types, to be +precise). + + In debugging dumps and machine descriptions, the machine mode of an +RTL expression is written after the expression code with a colon to +separate them. The letters `mode' which appear at the end of each +machine mode name are omitted. For example, `(reg:SI 38)' is a `reg' +expression with machine mode `SImode'. If the mode is `VOIDmode', it +is not written at all. + + Here is a table of machine modes. The term "byte" below refers to an +object of `BITS_PER_UNIT' bits (*note Storage Layout::.). + +`QImode' + "Quarter-Integer" mode represents a single byte treated as an + integer. + +`HImode' + "Half-Integer" mode represents a two-byte integer. + +`PSImode' + "Partial Single Integer" mode represents an integer which occupies + four bytes but which doesn't really use all four. On some + machines, this is the right mode to use for pointers. + +`SImode' + "Single Integer" mode represents a four-byte integer. + +`PDImode' + "Partial Double Integer" mode represents an integer which occupies + eight bytes but which doesn't really use all eight. On some + machines, this is the right mode to use for certain pointers. + +`DImode' + "Double Integer" mode represents an eight-byte integer. + +`TImode' + "Tetra Integer" (?) mode represents a sixteen-byte integer. + +`SFmode' + "Single Floating" mode represents a single-precision (four byte) + floating point number. + +`DFmode' + "Double Floating" mode represents a double-precision (eight byte) + floating point number. + +`XFmode' + "Extended Floating" mode represents a triple-precision (twelve + byte) floating point number. This mode is used for IEEE extended + floating point. + +`TFmode' + "Tetra Floating" mode represents a quadruple-precision (sixteen + byte) floating point number. + +`CCmode' + "Condition Code" mode represents the value of a condition code, + which is a machine-specific set of bits used to represent the + result of a comparison operation. Other machine-specific modes + may also be used for the condition code. These modes are not used + on machines that use `cc0' (see *note Condition Code::.). + +`BLKmode' + "Block" mode represents values that are aggregates to which none of + the other modes apply. In RTL, only memory references can have + this mode, and only if they appear in string-move or vector + instructions. On machines which have no such instructions, + `BLKmode' will not appear in RTL. + +`VOIDmode' + Void mode means the absence of a mode or an unspecified mode. For + example, RTL expressions of code `const_int' have mode `VOIDmode' + because they can be taken to have whatever mode the context + requires. In debugging dumps of RTL, `VOIDmode' is expressed by + the absence of any mode. + +`SCmode, DCmode, XCmode, TCmode' + These modes stand for a complex number represented as a pair of + floating point values. The floating point values are in `SFmode', + `DFmode', `XFmode', and `TFmode', respectively. + +`CQImode, CHImode, CSImode, CDImode, CTImode, COImode' + These modes stand for a complex number represented as a pair of + integer values. The integer values are in `QImode', `HImode', + `SImode', `DImode', `TImode', and `OImode', respectively. + + The machine description defines `Pmode' as a C macro which expands +into the machine mode used for addresses. Normally this is the mode +whose size is `BITS_PER_WORD', `SImode' on 32-bit machines. + + The only modes which a machine description must support are +`QImode', and the modes corresponding to `BITS_PER_WORD', +`FLOAT_TYPE_SIZE' and `DOUBLE_TYPE_SIZE'. The compiler will attempt to +use `DImode' for 8-byte structures and unions, but this can be +prevented by overriding the definition of `MAX_FIXED_MODE_SIZE'. +Alternatively, you can have the compiler use `TImode' for 16-byte +structures and unions. Likewise, you can arrange for the C type `short +int' to avoid using `HImode'. + + Very few explicit references to machine modes remain in the compiler +and these few references will soon be removed. Instead, the machine +modes are divided into mode classes. These are represented by the +enumeration type `enum mode_class' defined in `machmode.h'. The +possible mode classes are: + +`MODE_INT' + Integer modes. By default these are `QImode', `HImode', `SImode', + `DImode', and `TImode'. + +`MODE_PARTIAL_INT' + The "partial integer" modes, `PSImode' and `PDImode'. + +`MODE_FLOAT' + floating point modes. By default these are `SFmode', `DFmode', + `XFmode' and `TFmode'. + +`MODE_COMPLEX_INT' + Complex integer modes. (These are not currently implemented). + +`MODE_COMPLEX_FLOAT' + Complex floating point modes. By default these are `SCmode', + `DCmode', `XCmode', and `TCmode'. + +`MODE_FUNCTION' + Algol or Pascal function variables including a static chain. + (These are not currently implemented). + +`MODE_CC' + Modes representing condition code values. These are `CCmode' plus + any modes listed in the `EXTRA_CC_MODES' macro. *Note Jump + Patterns::, also see *Note Condition Code::. + +`MODE_RANDOM' + This is a catchall mode class for modes which don't fit into the + above classes. Currently `VOIDmode' and `BLKmode' are in + `MODE_RANDOM'. + + Here are some C macros that relate to machine modes: + +`GET_MODE (X)' + Returns the machine mode of the RTX X. + +`PUT_MODE (X, NEWMODE)' + Alters the machine mode of the RTX X to be NEWMODE. + +`NUM_MACHINE_MODES' + Stands for the number of machine modes available on the target + machine. This is one greater than the largest numeric value of any + machine mode. + +`GET_MODE_NAME (M)' + Returns the name of mode M as a string. + +`GET_MODE_CLASS (M)' + Returns the mode class of mode M. + +`GET_MODE_WIDER_MODE (M)' + Returns the next wider natural mode. For example, the expression + `GET_MODE_WIDER_MODE (QImode)' returns `HImode'. + +`GET_MODE_SIZE (M)' + Returns the size in bytes of a datum of mode M. + +`GET_MODE_BITSIZE (M)' + Returns the size in bits of a datum of mode M. + +`GET_MODE_MASK (M)' + Returns a bitmask containing 1 for all bits in a word that fit + within mode M. This macro can only be used for modes whose + bitsize is less than or equal to `HOST_BITS_PER_INT'. + +`GET_MODE_ALIGNMENT (M))' + Return the required alignment, in bits, for an object of mode M. + +`GET_MODE_UNIT_SIZE (M)' + Returns the size in bytes of the subunits of a datum of mode M. + This is the same as `GET_MODE_SIZE' except in the case of complex + modes. For them, the unit size is the size of the real or + imaginary part. + +`GET_MODE_NUNITS (M)' + Returns the number of units contained in a mode, i.e., + `GET_MODE_SIZE' divided by `GET_MODE_UNIT_SIZE'. + +`GET_CLASS_NARROWEST_MODE (C)' + Returns the narrowest mode in mode class C. + + The global variables `byte_mode' and `word_mode' contain modes whose +classes are `MODE_INT' and whose bitsizes are either `BITS_PER_UNIT' or +`BITS_PER_WORD', respectively. On 32-bit machines, these are `QImode' +and `SImode', respectively.  -File: gcc.info, Node: Run-time Target, Next: Storage Layout, Prev: Driver, Up: Machine Macros +File: gcc.info, Node: Constants, Next: Regs and Memory, Prev: Machine Modes, Up: RTL -Run-time Target Specification -============================= +Constant Expression Types +========================= -`CPP_PREDEFINES' - Define this to be a string constant containing `-D' options to - define the predefined macros that identify this machine and - system. These macros will be predefined unless the `-ansi' - option is specified. - - In addition, a parallel set of macros are predefined, whose names - are made by appending `__' at the beginning and at the end. These - `__' macros are permitted by the ANSI standard, so they are - predefined regardless of whether `-ansi' is specified. - - For example, on the Sun, one can use the following value: - - "-Dmc68000 -Dsun -Dunix" - - The result is to define the macros `__mc68000__', `__sun__' and - `__unix__' unconditionally, and the macros `mc68000', `sun' and - `unix' provided `-ansi' is not specified. - -`STDC_VALUE' - Define the value to be assigned to the built-in macro `__STDC__'. - The default is the value `1'. - -`extern int target_flags;' - This declaration should be present. - -`TARGET_...' - This series of macros is to allow compiler command arguments to - enable or disable the use of optional features of the target - machine. For example, one machine description serves both the - 68000 and the 68020; a command argument tells the compiler - whether it should use 68020-only instructions or not. This - command argument works by means of a macro `TARGET_68020' that - tests a bit in `target_flags'. - - Define a macro `TARGET_FEATURENAME' for each such option. Its - definition should test a bit in `target_flags'; for example: - - #define TARGET_68020 (target_flags & 1) - - One place where these macros are used is in the - condition-expressions of instruction patterns. Note how - `TARGET_68020' appears frequently in the 68000 machine - description file, `m68k.md'. Another place they are used is in - the definitions of the other macros in the `MACHINE.h' file. - -`TARGET_SWITCHES' - This macro defines names of command options to set and clear bits - in `target_flags'. Its definition is an initializer with a - subgrouping for each command option. - - Each subgrouping contains a string constant, that defines the - option name, and a number, which contains the bits to set in - `target_flags'. A negative number says to clear bits instead; - the negative of the number is which bits to clear. The actual - option name is made by appending `-m' to the specified name. - - One of the subgroupings should have a null string. The number in - this grouping is the default value for `target_flags'. Any - target options act starting with that value. - - Here is an example which defines `-m68000' and `-m68020' with - opposite meanings, and picks the latter as the default: - - #define TARGET_SWITCHES \ - { { "68020", 1}, \ - { "68000", -1}, \ - { "", 1}} - -`TARGET_OPTIONS' - This macro is similar to `TARGET_SWITCHES' but defines names of - command options that have values. Its definition is an - initializer with a subgrouping for each command option. - - Each subgrouping contains a string constant, that defines the - fixed part of the option name, and the address of a variable. - The variable, type `char *', is set to the variable part of the - given option if the fixed part matches. The actual option name - is made by appending `-m' to the specified name. - - Here is an example which defines `-mshort-data-NUMBER'. If the - given option is `-mshort-data-512', the variable `m88k_short_data' - will be set to the string `"512"'. - - extern char *m88k_short_data; - #define TARGET_OPTIONS { { "short-data-", &m88k_short_data } } - -`TARGET_VERSION' - This macro is a C statement to print on `stderr' a string - describing the particular machine description choice. Every - machine description should define `TARGET_VERSION'. For example: - - #ifdef MOTOROLA - #define TARGET_VERSION fprintf (stderr, " (68k, Motorola syntax)"); - #else - #define TARGET_VERSION fprintf (stderr, " (68k, MIT syntax)"); - #endif - -`OVERRIDE_OPTIONS' - Sometimes certain combinations of command options do not make - sense on a particular target machine. You can define a macro - `OVERRIDE_OPTIONS' to take account of this. This macro, if - defined, is executed once just after all the command options have - been parsed. - - Don't use this macro to turn on various extra optimizations for - `-O'. That is what `OPTIMIZATION_OPTIONS' is for. - -`OPTIMIZATION_OPTIONS (LEVEL)' - Some machines may desire to change what optimizations are - performed for various optimization levels. This macro, if - defined, is executed once just after the optimization level is - determined and before the remainder of the command options have - been parsed. Values set in this macro are used as the default - values for the other command line options. + The simplest RTL expressions are those that represent constant +values. - LEVEL is the optimization level specified; 2 if -O2 is specified, - 1 if -O is specified, and 0 if neither is specified. +`(const_int I)' + This type of expression represents the integer value I. I is + customarily accessed with the macro `INTVAL' as in `INTVAL (EXP)', + which is equivalent to `XWINT (EXP, 0)'. + + There is only one expression object for the integer value zero; it + is the value of the variable `const0_rtx'. Likewise, the only + expression for integer value one is found in `const1_rtx', the only + expression for integer value two is found in `const2_rtx', and the + only expression for integer value negative one is found in + `constm1_rtx'. Any attempt to create an expression of code + `const_int' and value zero, one, two or negative one will return + `const0_rtx', `const1_rtx', `const2_rtx' or `constm1_rtx' as + appropriate. + + Similarly, there is only one object for the integer whose value is + `STORE_FLAG_VALUE'. It is found in `const_true_rtx'. If + `STORE_FLAG_VALUE' is one, `const_true_rtx' and `const1_rtx' will + point to the same object. If `STORE_FLAG_VALUE' is -1, + `const_true_rtx' and `constm1_rtx' will point to the same object. + +`(const_double:M ADDR I0 I1 ...)' + Represents either a floating-point constant of mode M or an + integer constant too large to fit into `HOST_BITS_PER_WIDE_INT' + bits but small enough to fit within twice that number of bits (GNU + CC does not provide a mechanism to represent even larger + constants). In the latter case, M will be `VOIDmode'. + + ADDR is used to contain the `mem' expression that corresponds to + the location in memory that at which the constant can be found. If + it has not been allocated a memory location, but is on the chain + of all `const_double' expressions in this compilation (maintained + using an undisplayed field), ADDR contains `const0_rtx'. If it is + not on the chain, ADDR contains `cc0_rtx'. ADDR is customarily + accessed with the macro `CONST_DOUBLE_MEM' and the chain field via + `CONST_DOUBLE_CHAIN'. + + If M is `VOIDmode', the bits of the value are stored in I0 and I1. + I0 is customarily accessed with the macro `CONST_DOUBLE_LOW' and + I1 with `CONST_DOUBLE_HIGH'. + + If the constant is floating point (regardless of its precision), + then the number of integers used to store the value depends on the + size of `REAL_VALUE_TYPE' (*note Cross-compilation::.). The + integers represent a floating point number, but not precisely in + the target machine's or host machine's floating point format. To + convert them to the precise bit pattern used by the target + machine, use the macro `REAL_VALUE_TO_TARGET_DOUBLE' and friends + (*note Data Output::.). + + The macro `CONST0_RTX (MODE)' refers to an expression with value 0 + in mode MODE. If mode MODE is of mode class `MODE_INT', it + returns `const0_rtx'. Otherwise, it returns a `CONST_DOUBLE' + expression in mode MODE. Similarly, the macro `CONST1_RTX (MODE)' + refers to an expression with value 1 in mode MODE and similarly + for `CONST2_RTX'. + +`(const_string STR)' + Represents a constant string with value STR. Currently this is + used only for insn attributes (*note Insn Attributes::.) since + constant strings in C are placed in memory. + +`(symbol_ref:MODE SYMBOL)' + Represents the value of an assembler label for data. SYMBOL is a + string that describes the name of the assembler label. If it + starts with a `*', the label is the rest of SYMBOL not including + the `*'. Otherwise, the label is SYMBOL, usually prefixed with + `_'. + + The `symbol_ref' contains a mode, which is usually `Pmode'. + Usually that is the only mode for which a symbol is directly valid. + +`(label_ref LABEL)' + Represents the value of an assembler label for code. It contains + one operand, an expression, which must be a `code_label' that + appears in the instruction sequence to identify the place where + the label should go. + + The reason for using a distinct expression type for code label + references is so that jump optimization can distinguish them. + +`(const:M EXP)' + Represents a constant that is the result of an assembly-time + arithmetic computation. The operand, EXP, is an expression that + contains only constants (`const_int', `symbol_ref' and `label_ref' + expressions) combined with `plus' and `minus'. However, not all + combinations are valid, since the assembler cannot do arbitrary + arithmetic on relocatable symbols. + + M should be `Pmode'. + +`(high:M EXP)' + Represents the high-order bits of EXP, usually a `symbol_ref'. + The number of bits is machine-dependent and is normally the number + of bits specified in an instruction that initializes the high + order bits of a register. It is used with `lo_sum' to represent + the typical two-instruction sequence used in RISC machines to + reference a global memory location. - *Do not examine `write_symbols' in this macro!* The debugging - options are not supposed to alter the generated code. + M should be `Pmode'. - \ No newline at end of file