--- gcc/gcc.info-11 2018/04/24 18:02:01 1.1.1.4 +++ gcc/gcc.info-11 2018/04/24 18:42:13 1.1.1.10 @@ -1,9 +1,13 @@ -This is Info file gcc.info, produced by Makeinfo-1.49 from the input -file gcc.texi. +This is Info file gcc.info, produced by Makeinfo version 1.67 from the +input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 59 Temple Place - Suite 330 +Boston, MA 02111-1307 USA + + Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995 Free Software +Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -11,981 +15,1130 @@ preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the sections entitled "GNU General Public License" and "Protect -Your Freedom--Fight `Look And Feel'" are included exactly as in the -original, and provided that the entire resulting derived work is -distributed under the terms of a permission notice identical to this -one. +that the sections entitled "GNU General Public License," "Funding for +Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are +included exactly as in the original, and provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public -License" and "Protect Your Freedom--Fight `Look And Feel'", and this -permission notice, may be included in translations approved by the Free -Software Foundation instead of in the original English. +License," "Funding for Free Software," and "Protect Your Freedom--Fight +`Look And Feel'", and this permission notice, may be included in +translations approved by the Free Software Foundation instead of in the +original English.  -File: gcc.info, Node: Patterns, Next: Example, Prev: Machine Desc, Up: Machine Desc +File: gcc.info, Node: Installation Problems, Next: Cross-Compiler Problems, Prev: Actual Bugs, Up: Trouble -Everything about Instruction Patterns -===================================== +Installation Problems +===================== - Each instruction pattern contains an incomplete RTL expression, with -pieces to be filled in later, operand constraints that restrict how the -pieces can be filled in, and an output pattern or C code to generate -the assembler output, all wrapped up in a `define_insn' expression. - - A `define_insn' is an RTL expression containing four or five -operands: - - 1. An optional name. The presence of a name indicate that this - instruction pattern can perform a certain standard job for the - RTL-generation pass of the compiler. This pass knows certain - names and will use the instruction patterns with those names, if - the names are defined in the machine description. - - The absence of a name is indicated by writing an empty string - where the name should go. Nameless instruction patterns are never - used for generating RTL code, but they may permit several simpler - insns to be combined later on. - - Names that are not thus known and used in RTL-generation have no - effect; they are equivalent to no name at all. - - 2. The "RTL template" (*note RTL Template::.) is a vector of - incomplete RTL expressions which show what the instruction should - look like. It is incomplete because it may contain - `match_operand', `match_operator', and `match_dup' expressions - that stand for operands of the instruction. - - If the vector has only one element, that element is the template - for the instruction pattern. If the vector has multiple elements, - then the instruction pattern is a `parallel' expression containing - the elements described. - - 3. A condition. This is a string which contains a C expression that - is the final test to decide whether an insn body matches this - pattern. - - For a named pattern, the condition (if present) may not depend on - the data in the insn being matched, but only the - target-machine-type flags. The compiler needs to test these - conditions during initialization in order to learn exactly which - named instructions are available in a particular run. - - For nameless patterns, the condition is applied only when matching - an individual insn, and only after the insn has matched the - pattern's recognition template. The insn's operands may be found - in the vector `operands'. - - 4. The "output template": a string that says how to output matching - insns as assembler code. `%' in this string specifies where to - substitute the value of an operand. *Note Output Template::. + This is a list of problems (and some apparent problems which don't +really mean anything is wrong) that show up during installation of GNU +CC. - When simple substitution isn't general enough, you can specify a - piece of C code to compute the output. *Note Output Statement::. + * On certain systems, defining certain environment variables such as + `CC' can interfere with the functioning of `make'. - 5. Optionally, a vector containing the values of attributes for insns - matching this pattern. *Note Insn Attributes::. + * If you encounter seemingly strange errors when trying to build the + compiler in a directory other than the source directory, it could + be because you have previously configured the compiler in the + source directory. Make sure you have done all the necessary + preparations. *Note Other Dir::. - -File: gcc.info, Node: Example, Next: RTL Template, Prev: Patterns, Up: Machine Desc + * If you build GNU CC on a BSD system using a directory stored in a + System V file system, problems may occur in running `fixincludes' + if the System V file system doesn't support symbolic links. These + problems result in a failure to fix the declaration of `size_t' in + `sys/types.h'. If you find that `size_t' is a signed type and + that type mismatches occur, this could be the cause. + + The solution is not to use such a directory for building GNU CC. + + * In previous versions of GNU CC, the `gcc' driver program looked for + `as' and `ld' in various places; for example, in files beginning + with `/usr/local/lib/gcc-'. GNU CC version 2 looks for them in + the directory `/usr/local/lib/gcc-lib/TARGET/VERSION'. + + Thus, to use a version of `as' or `ld' that is not the system + default, for example `gas' or GNU `ld', you must put them in that + directory (or make links to them from that directory). + + * Some commands executed when making the compiler may fail (return a + non-zero status) and be ignored by `make'. These failures, which + are often due to files that were not found, are expected, and can + safely be ignored. + + * It is normal to have warnings in compiling certain files about + unreachable code and about enumeration type clashes. These files' + names begin with `insn-'. Also, `real.c' may get some warnings + that you can ignore. + + * Sometimes `make' recompiles parts of the compiler when installing + the compiler. In one case, this was traced down to a bug in + `make'. Either ignore the problem or switch to GNU Make. + + * If you have installed a program known as purify, you may find that + it causes errors while linking `enquire', which is part of building + GNU CC. The fix is to get rid of the file `real-ld' which purify + installs--so that GNU CC won't try to use it. + + * On SLS 1.01, a Linux-based GNU system, there is a problem with + `libc.a': it does not contain the obstack functions. However, GNU + CC assumes that the obstack functions are in `libc.a' when it is + the GNU C library. To work around this problem, change the + `__GNU_LIBRARY__' conditional around line 31 to `#if 1'. + + * On some 386 systems, building the compiler never finishes because + `enquire' hangs due to a hardware problem in the motherboard--it + reports floating point exceptions to the kernel incorrectly. You + can install GNU CC except for `float.h' by patching out the + command to run `enquire'. You may also be able to fix the problem + for real by getting a replacement motherboard. This problem was + observed in Revision E of the Micronics motherboard, and is fixed + in Revision F. It has also been observed in the MYLEX MXA-33 + motherboard. + + If you encounter this problem, you may also want to consider + removing the FPU from the socket during the compilation. + Alternatively, if you are running SCO Unix, you can reboot and + force the FPU to be ignored. To do this, type `hd(40)unix auto + ignorefpu'. + + * On some 386 systems, GNU CC crashes trying to compile `enquire.c'. + This happens on machines that don't have a 387 FPU chip. On 386 + machines, the system kernel is supposed to emulate the 387 when you + don't have one. The crash is due to a bug in the emulator. + + One of these systems is the Unix from Interactive Systems: 386/ix. + On this system, an alternate emulator is provided, and it does + work. To use it, execute this command as super-user: + + ln /etc/emulator.rel1 /etc/emulator + + and then reboot the system. (The default emulator file remains + present under the name `emulator.dflt'.) + + Try using `/etc/emulator.att', if you have such a problem on the + SCO system. + + Another system which has this problem is Esix. We don't know + whether it has an alternate emulator that works. + + On NetBSD 0.8, a similar problem manifests itself as these error + messages: + + enquire.c: In function `fprop': + enquire.c:2328: floating overflow + + * On SCO systems, when compiling GNU CC with the system's compiler, + do not use `-O'. Some versions of the system's compiler miscompile + GNU CC with `-O'. + + * Sometimes on a Sun 4 you may observe a crash in the program + `genflags' or `genoutput' while building GNU CC. This is said to + be due to a bug in `sh'. You can probably get around it by running + `genflags' or `genoutput' manually and then retrying the `make'. + + * On Solaris 2, executables of GNU CC version 2.0.2 are commonly + available, but they have a bug that shows up when compiling current + versions of GNU CC: undefined symbol errors occur during assembly + if you use `-g'. + + The solution is to compile the current version of GNU CC without + `-g'. That makes a working compiler which you can use to recompile + with `-g'. + + * Solaris 2 comes with a number of optional OS packages. Some of + these packages are needed to use GNU CC fully. If you did not + install all optional packages when installing Solaris, you will + need to verify that the packages that GNU CC needs are installed. + + To check whether an optional package is installed, use the + `pkginfo' command. To add an optional package, use the `pkgadd' + command. For further details, see the Solaris documentation. + + For Solaris 2.0 and 2.1, GNU CC needs six packages: `SUNWarc', + `SUNWbtool', `SUNWesu', `SUNWhea', `SUNWlibm', and `SUNWtoo'. + + For Solaris 2.2, GNU CC needs an additional seventh package: + `SUNWsprot'. + + * On Solaris 2, trying to use the linker and other tools in + `/usr/ucb' to install GNU CC has been observed to cause trouble. + For example, the linker may hang indefinitely. The fix is to + remove `/usr/ucb' from your `PATH'. + + * If you use the 1.31 version of the MIPS assembler (such as was + shipped with Ultrix 3.1), you will need to use the + -fno-delayed-branch switch when optimizing floating point code. + Otherwise, the assembler will complain when the GCC compiler fills + a branch delay slot with a floating point instruction, such as + `add.d'. + + * If on a MIPS system you get an error message saying "does not have + gp sections for all it's [sic] sectons [sic]", don't worry about + it. This happens whenever you use GAS with the MIPS linker, but + there is not really anything wrong, and it is okay to use the + output file. You can stop such warnings by installing the GNU + linker. + + It would be nice to extend GAS to produce the gp tables, but they + are optional, and there should not be a warning about their + absence. + + * In Ultrix 4.0 on the MIPS machine, `stdio.h' does not work with GNU + CC at all unless it has been fixed with `fixincludes'. This causes + problems in building GNU CC. Once GNU CC is installed, the + problems go away. + + To work around this problem, when making the stage 1 compiler, + specify this option to Make: + + GCC_FOR_TARGET="./xgcc -B./ -I./include" + + When making stage 2 and stage 3, specify this option: + + CFLAGS="-g -I./include" + + * Users have reported some problems with version 2.0 of the MIPS + compiler tools that were shipped with Ultrix 4.1. Version 2.10 + which came with Ultrix 4.2 seems to work fine. + + Users have also reported some problems with version 2.20 of the + MIPS compiler tools that were shipped with RISC/os 4.x. The + earlier version 2.11 seems to work fine. + + * Some versions of the MIPS linker will issue an assertion failure + when linking code that uses `alloca' against shared libraries on + RISC-OS 5.0, and DEC's OSF/1 systems. This is a bug in the + linker, that is supposed to be fixed in future revisions. To + protect against this, GNU CC passes `-non_shared' to the linker + unless you pass an explicit `-shared' or `-call_shared' switch. + + * On System V release 3, you may get this error message while + linking: + + ld fatal: failed to write symbol name SOMETHING + in strings table for file WHATEVER + + This probably indicates that the disk is full or your ULIMIT won't + allow the file to be as large as it needs to be. + + This problem can also result because the kernel parameter `MAXUMEM' + is too small. If so, you must regenerate the kernel and make the + value much larger. The default value is reported to be 1024; a + value of 32768 is said to work. Smaller values may also work. + + * On System V, if you get an error like this, + + /usr/local/lib/bison.simple: In function `yyparse': + /usr/local/lib/bison.simple:625: virtual memory exhausted + + that too indicates a problem with disk space, ULIMIT, or `MAXUMEM'. + + * Current GNU CC versions probably do not work on version 2 of the + NeXT operating system. + + * On NeXTStep 3.0, the Objective C compiler does not work, due, + apparently, to a kernel bug that it happens to trigger. This + problem does not happen on 3.1. + + * On the Tower models 4N0 and 6N0, by default a process is not + allowed to have more than one megabyte of memory. GNU CC cannot + compile itself (or many other programs) with `-O' in that much + memory. + + To solve this problem, reconfigure the kernel adding the following + line to the configuration file: + + MAXUMEM = 4096 + + * On HP 9000 series 300 or 400 running HP-UX release 8.0, there is a + bug in the assembler that must be fixed before GNU CC can be + built. This bug manifests itself during the first stage of + compilation, while building `libgcc2.a': + + _floatdisf + cc1: warning: `-g' option not supported on this version of GCC + cc1: warning: `-g1' option not supported on this version of GCC + ./xgcc: Internal compiler error: program as got fatal signal 11 + + A patched version of the assembler is available by anonymous ftp + from `altdorf.ai.mit.edu' as the file + `archive/cph/hpux-8.0-assembler'. If you have HP software support, + the patch can also be obtained directly from HP, as described in + the following note: + + This is the patched assembler, to patch SR#1653-010439, where + the assembler aborts on floating point constants. + + The bug is not really in the assembler, but in the shared + library version of the function "cvtnum(3c)". The bug on + "cvtnum(3c)" is SR#4701-078451. Anyway, the attached + assembler uses the archive library version of "cvtnum(3c)" + and thus does not exhibit the bug. -Example of `define_insn' -======================== + This patch is also known as PHCO_4484. - Here is an actual example of an instruction pattern, for the -68000/68020. + * On HP-UX version 8.05, but not on 8.07 or more recent versions, + the `fixproto' shell script triggers a bug in the system shell. + If you encounter this problem, upgrade your operating system or + use BASH (the GNU shell) to run `fixproto'. - (define_insn "tstsi" - [(set (cc0) - (match_operand:SI 0 "general_operand" "rm"))] - "" - "* - { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) - return \"tstl %0\"; - return \"cmpl #0,%0\"; }") - - This is an instruction that sets the condition codes based on the -value of a general operand. It has no condition, so any insn whose RTL -description has the form shown may be handled according to this -pattern. The name `tstsi' means "test a `SImode' value" and tells the -RTL generation pass that, when it is necessary to test such a value, an -insn to do so can be constructed using this pattern. - - The output control string is a piece of C code which chooses which -output template to return based on the kind of operand and the specific -type of CPU for which code is being generated. + * Some versions of the Pyramid C compiler are reported to be unable + to compile GNU CC. You must use an older version of GNU CC for + bootstrapping. One indication of this problem is if you get a + crash when GNU CC compiles the function `muldi3' in file + `libgcc2.c'. - `"rm"' is an operand constraint. Its meaning is explained below. + You may be able to succeed by getting GNU CC version 1, installing + it, and using it to compile GNU CC version 2. The bug in the + Pyramid C compiler does not seem to affect GNU CC version 1. + + * There may be similar problems on System V Release 3.1 on 386 + systems. + + * On the Intel Paragon (an i860 machine), if you are using operating + system version 1.0, you will get warnings or errors about + redefinition of `va_arg' when you build GNU CC. + + If this happens, then you need to link most programs with the + library `iclib.a'. You must also modify `stdio.h' as follows: + before the lines + + #if defined(__i860__) && !defined(_VA_LIST) + #include + + insert the line + + #if __PGC__ + + and after the lines + + extern int vprintf(const char *, va_list ); + extern int vsprintf(char *, const char *, va_list ); + #endif + + insert the line + + #endif /* __PGC__ */ + + These problems don't exist in operating system version 1.1. + + * On the Altos 3068, programs compiled with GNU CC won't work unless + you fix a kernel bug. This happens using system versions V.2.2 + 1.0gT1 and V.2.2 1.0e and perhaps later versions as well. See the + file `README.ALTOS'. + + * You will get several sorts of compilation and linking errors on the + we32k if you don't follow the special instructions. *Note + Configurations::. + + * A bug in the HP-UX 8.05 (and earlier) shell will cause the fixproto + program to report an error of the form: + + ./fixproto: sh internal 1K buffer overflow + + To fix this, change the first line of the fixproto script to look + like: + + #!/bin/ksh + + +File: gcc.info, Node: Cross-Compiler Problems, Next: Interoperation, Prev: Installation Problems, Up: Trouble + +Cross-Compiler Problems +======================= + + You may run into problems with cross compilation on certain machines, +for several reasons. + + * Cross compilation can run into trouble for certain machines because + some target machines' assemblers require floating point numbers to + be written as *integer* constants in certain contexts. + + The compiler writes these integer constants by examining the + floating point value as an integer and printing that integer, + because this is simple to write and independent of the details of + the floating point representation. But this does not work if the + compiler is running on a different machine with an incompatible + floating point format, or even a different byte-ordering. + + In addition, correct constant folding of floating point values + requires representing them in the target machine's format. (The C + standard does not quite require this, but in practice it is the + only way to win.) + + It is now possible to overcome these problems by defining macros + such as `REAL_VALUE_TYPE'. But doing so is a substantial amount of + work for each target machine. *Note Cross-compilation::. + + * At present, the program `mips-tfile' which adds debug support to + object files on MIPS systems does not work in a cross compile + environment.  -File: gcc.info, Node: RTL Template, Next: Output Template, Prev: Example, Up: Machine Desc +File: gcc.info, Node: Interoperation, Next: External Bugs, Prev: Cross-Compiler Problems, Up: Trouble -RTL Template for Generating and Recognizing Insns -================================================= +Interoperation +============== - The RTL template is used to define which insns match the particular -pattern and how to find their operands. For named patterns, the RTL -template also says how to construct an insn from specified operands. - - Construction involves substituting specified operands into a copy of -the template. Matching involves determining the values that serve as -the operands in the insn being matched. Both of these activities are -controlled by special expression types that direct matching and -substitution of the operands. - -`(match_operand:M N PREDICATE CONSTRAINT)' - This expression is a placeholder for operand number N of the insn. - When constructing an insn, operand number N will be substituted - at this point. When matching an insn, whatever appears at this - position in the insn will be taken as operand number N; but it - must satisfy PREDICATE or this instruction pattern will not match - at all. - - Operand numbers must be chosen consecutively counting from zero in - each instruction pattern. There may be only one `match_operand' - expression in the pattern for each operand number. Usually - operands are numbered in the order of appearance in `match_operand' - expressions. - - PREDICATE is a string that is the name of a C function that - accepts two arguments, an expression and a machine mode. During - matching, the function will be called with the putative operand as - the expression and M as the mode argument (if M is not specified, - `VOIDmode' will be used, which normally causes PREDICATE to accept - any mode). If it returns zero, this instruction pattern fails to - match. PREDICATE may be an empty string; then it means no test is - to be done on the operand, so anything which occurs in this - position is valid. - - Most of the time, PREDICATE will reject modes other than M--but - not always. For example, the predicate `address_operand' uses M - as the mode of memory ref that the address should be valid for. - Many predicates accept `const_int' nodes even though their mode is - `VOIDmode'. - - CONSTRAINT controls reloading and the choice of the best register - class to use for a value, as explained later (*note - Constraints::.). - - People are often unclear on the difference between the constraint - and the predicate. The predicate helps decide whether a given - insn matches the pattern. The constraint plays no role in this - decision; instead, it controls various decisions in the case of an - insn which does match. - - On CISC machines, PREDICATE is most often `"general_operand"'. - This function checks that the putative operand is either a - constant, a register or a memory reference, and that it is valid - for mode M. - - For an operand that must be a register, PREDICATE should be - `"register_operand"'. It would be valid to use - `"general_operand"', since the reload pass would copy any - non-register operands through registers, but this would make GNU - CC do extra work, it would prevent invariant operands (such as - constant) from being removed from loops, and it would prevent the - register allocator from doing the best possible job. On RISC - machines, it is usually most efficient to allow PREDICATE to - accept only objects that the constraints allow. - - For an operand that must be a constant, either use - `"immediate_operand"' for PREDICATE, or make the instruction - pattern's extra condition require a constant, or both. You cannot - expect the constraints to do this work! If the constraints allow - only constants, but the predicate allows something else, the - compiler will crash when that case arises. - -`(match_scratch:M N CONSTRAINT)' - This expression is also a placeholder for operand number N and - indicates that operand must be a `scratch' or `reg' expression. - - When matching patterns, this is completely equivalent to - - (match_operand:M N "scratch_operand" PRED) - - but, when generating RTL, it produces a (`scratch':M) expression. - - If the last few expressions in a `parallel' are `clobber' - expressions whose operands are either a hard register or - `match_scratch', the combiner can add them when necessary. *Note - Side Effects::. - -`(match_dup N)' - This expression is also a placeholder for operand number N. It is - used when the operand needs to appear more than once in the insn. - - In construction, `match_dup' behaves exactly like `match_operand': - the operand is substituted into the insn being constructed. But - in matching, `match_dup' behaves differently. It assumes that - operand number N has already been determined by a `match_operand' - appearing earlier in the recognition template, and it matches only - an identical-looking expression. - -`(match_operator:M N PREDICATE [OPERANDS...])' - This pattern is a kind of placeholder for a variable RTL expression - code. - - When constructing an insn, it stands for an RTL expression whose - expression code is taken from that of operand N, and whose - operands are constructed from the patterns OPERANDS. - - When matching an expression, it matches an expression if the - function PREDICATE returns nonzero on that expression *and* the - patterns OPERANDS match the operands of the expression. - - Suppose that the function `commutative_operator' is defined as - follows, to match any expression whose operator is one of the - commutative arithmetic operators of RTL and whose mode is MODE: - - int - commutative_operator (x, mode) - rtx x; - enum machine_mode mode; + This section lists various difficulties encountered in using GNU C or +GNU C++ together with other compilers or with the assemblers, linkers, +libraries and debuggers on certain systems. + + * Objective C does not work on the RS/6000. + + * GNU C++ does not do name mangling in the same way as other C++ + compilers. This means that object files compiled with one compiler + cannot be used with another. + + This effect is intentional, to protect you from more subtle + problems. Compilers differ as to many internal details of C++ + implementation, including: how class instances are laid out, how + multiple inheritance is implemented, and how virtual function + calls are handled. If the name encoding were made the same, your + programs would link against libraries provided from other + compilers--but the programs would then crash when run. + Incompatible libraries are then detected at link time, rather than + at run time. + + * Older GDB versions sometimes fail to read the output of GNU CC + version 2. If you have trouble, get GDB version 4.4 or later. + + * DBX rejects some files produced by GNU CC, though it accepts + similar constructs in output from PCC. Until someone can supply a + coherent description of what is valid DBX input and what is not, + there is nothing I can do about these problems. You are on your + own. + + * The GNU assembler (GAS) does not support PIC. To generate PIC + code, you must use some other assembler, such as `/bin/as'. + + * On some BSD systems, including some versions of Ultrix, use of + profiling causes static variable destructors (currently used only + in C++) not to be run. + + * Use of `-I/usr/include' may cause trouble. + + Many systems come with header files that won't work with GNU CC + unless corrected by `fixincludes'. The corrected header files go + in a new directory; GNU CC searches this directory before + `/usr/include'. If you use `-I/usr/include', this tells GNU CC to + search `/usr/include' earlier on, before the corrected headers. + The result is that you get the uncorrected header files. + + Instead, you should use these options (when compiling C programs): + + -I/usr/local/lib/gcc-lib/TARGET/VERSION/include -I/usr/include + + For C++ programs, GNU CC also uses a special directory that + defines C++ interfaces to standard C subroutines. This directory + is meant to be searched *before* other standard include + directories, so that it takes precedence. If you are compiling + C++ programs and specifying include directories explicitly, use + this option first, then the two options above: + + -I/usr/local/lib/g++-include + + * On some SGI systems, when you use `-lgl_s' as an option, it gets + translated magically to `-lgl_s -lX11_s -lc_s'. Naturally, this + does not happen when you use GNU CC. You must specify all three + options explicitly. + + * On a Sparc, GNU CC aligns all values of type `double' on an 8-byte + boundary, and it expects every `double' to be so aligned. The Sun + compiler usually gives `double' values 8-byte alignment, with one + exception: function arguments of type `double' may not be aligned. + + As a result, if a function compiled with Sun CC takes the address + of an argument of type `double' and passes this pointer of type + `double *' to a function compiled with GNU CC, dereferencing the + pointer may cause a fatal signal. + + One way to solve this problem is to compile your entire program + with GNU CC. Another solution is to modify the function that is + compiled with Sun CC to copy the argument into a local variable; + local variables are always properly aligned. A third solution is + to modify the function that uses the pointer to dereference it via + the following function `access_double' instead of directly with + `*': + + inline double + access_double (double *unaligned_ptr) { - enum rtx_code code = GET_CODE (x); - if (GET_MODE (x) != mode) - return 0; - return GET_RTX_CLASS (code) == 'c' || code == EQ || code == NE; + union d2i { double d; int i[2]; }; + + union d2i *p = (union d2i *) unaligned_ptr; + union d2i u; + + u.i[0] = p->i[0]; + u.i[1] = p->i[1]; + + return u.d; } - Then the following pattern will match any RTL expression consisting - of a commutative operator applied to two general operands: + Storing into the pointer can be done likewise with the same union. - (match_operator:SI 3 "commutative_operator" - [(match_operand:SI 1 "general_operand" "g") - (match_operand:SI 2 "general_operand" "g")]) - - Here the vector `[OPERANDS...]' contains two patterns because the - expressions to be matched all contain two operands. - - When this pattern does match, the two operands of the commutative - operator are recorded as operands 1 and 2 of the insn. (This is - done by the two instances of `match_operand'.) Operand 3 of the - insn will be the entire commutative expression: use `GET_CODE - (operands[3])' to see which commutative operator was used. - - The machine mode M of `match_operator' works like that of - `match_operand': it is passed as the second argument to the - predicate function, and that function is solely responsible for - deciding whether the expression to be matched "has" that mode. - - When constructing an insn, argument 3 of the gen-function will - specify the operation (i.e. the expression code) for the - expression to be made. It should be an RTL expression, whose - expression code is copied into a new expression whose operands are - arguments 1 and 2 of the gen-function. The subexpressions of - argument 3 are not used; only its expression code matters. - - When `match_operator' is used in a pattern for matching an insn, - it usually best if the operand number of the `match_operator' is - higher than that of the actual operands of the insn. This improves - register allocation because the register allocator often looks at - operands 1 and 2 of insns to see if it can do register tying. - - There is no way to specify constraints in `match_operator'. The - operand of the insn which corresponds to the `match_operator' - never has any constraints because it is never reloaded as a whole. - However, if parts of its OPERANDS are matched by `match_operand' - patterns, those parts may have constraints of their own. - -`(match_op_dup:M N[OPERANDS...])' - Like `match_dup', except that it applies to operators instead of - operands. When constructing an insn, operand number N will be - substituted at this point. But in matching, `match_op_dup' behaves - differently. It assumes that operand number N has already been - determined by a `match_operator' appearing earlier in the - recognition template, and it matches only an identical-looking - expression. - -`(match_parallel N PREDICATE [SUBPAT...])' - This pattern is a placeholder for an insn that consists of a - `parallel' expression with a variable number of elements. This - expression should only appear at the top level of an insn pattern. - - When constructing an insn, operand number N will be substituted at - this point. When matching an insn, it matches if the body of the - insn is a `parallel' expression with at least as many elements as - the vector of SUBPAT expressions in the `match_parallel', if each - SUBPAT matches the corresponding element of the `parallel', *and* - the function PREDICATE returns nonzero on the `parallel' that is - the body of the insn. It is the responsibility of the predicate - to validate elements of the `parallel' beyond those listed in the - `match_parallel'. - - A typical use of `match_parallel' is to match load and store - multiple expressions, which can contains a variable number of - elements in a `parallel'. For example, - - (define_insn "" - [(match_parallel 0 "load_multiple_operation" - [(set (match_operand:SI 1 "gpc_reg_operand" "=r") - (match_operand:SI 2 "memory_operand" "m")) - (use (reg:SI 179)) - (clobber (reg:SI 179))])] - "" - "loadm 0,0,%1,%2") - - This example comes from `a29k.md'. The function - `load_multiple_operations' is defined in `a29k.c' and checks that - subsequent elements in the `parallel' are the same as the `set' in - the pattern, except that they are referencing subsequent registers - and memory locations. - - An insn that matches this pattern might look like: - - (parallel [(set (reg:SI 20) (mem:SI (reg:SI 100))) - (use (reg:SI 179)) - (clobber (reg:SI 179)) - (set (reg:SI 21) (mem:SI (plus:SI (reg:SI 100) (const_int 4)))) - (set (reg:SI 22) (mem:SI (plus:SI (reg:SI 100) (const_int 8))))]) - -`(match_par_dup N [SUBPAT...])' - Like `match_op_dup', but for `match_parallel' instead of - `match_operator'. - -`(address (match_operand:M N "address_operand" ""))' - This complex of expressions is a placeholder for an operand number - N in a "load address" instruction: an operand which specifies a - memory location in the usual way, but for which the actual operand - value used is the address of the location, not the contents of the - location. - - `address' expressions never appear in RTL code, only in machine - descriptions. And they are used only in machine descriptions that - do not use the operand constraint feature. When operand - constraints are in use, the letter `p' in the constraint serves - this purpose. - - M is the machine mode of the *memory location being addressed*, - not the machine mode of the address itself. That mode is always - the same on a given target machine (it is `Pmode', which normally - is `SImode'), so there is no point in mentioning it; thus, no - machine mode is written in the `address' expression. If some day - support is added for machines in which addresses of different - kinds of objects appear differently or are used differently (such - as the PDP-10), different formats would perhaps need different - machine modes and these modes might be written in the `address' - expression. + * On Solaris, the `malloc' function in the `libmalloc.a' library may + allocate memory that is only 4 byte aligned. Since GNU CC on the + Sparc assumes that doubles are 8 byte aligned, this may result in a + fatal signal if doubles are stored in memory allocated by the + `libmalloc.a' library. + + The solution is to not use the `libmalloc.a' library. Use instead + `malloc' and related functions from `libc.a'; they do not have + this problem. + + * Sun forgot to include a static version of `libdl.a' with some + versions of SunOS (mainly 4.1). This results in undefined symbols + when linking static binaries (that is, if you use `-static'). If + you see undefined symbols `_dlclose', `_dlsym' or `_dlopen' when + linking, compile and link against the file `mit/util/misc/dlsym.c' + from the MIT version of X windows. + + * The 128-bit long double format that the Sparc port supports + currently works by using the architecturally defined quad-word + floating point instructions. Since there is no hardware that + supports these instructions they must be emulated by the operating + system. Long doubles do not work in Sun OS versions 4.0.3 and + earlier, because the kernel emulator uses an obsolete and + incompatible format. Long doubles do not work in Sun OS version + 4.1.1 due to a problem in a Sun library. Long doubles do work on + Sun OS versions 4.1.2 and higher, but GNU CC does not enable them + by default. Long doubles appear to work in Sun OS 5.x (Solaris + 2.x). + + * On HP-UX version 9.01 on the HP PA, the HP compiler `cc' does not + compile GNU CC correctly. We do not yet know why. However, GNU CC + compiled on earlier HP-UX versions works properly on HP-UX 9.01 + and can compile itself properly on 9.01. + + * On the HP PA machine, ADB sometimes fails to work on functions + compiled with GNU CC. Specifically, it fails to work on functions + that use `alloca' or variable-size arrays. This is because GNU CC + doesn't generate HP-UX unwind descriptors for such functions. It + may even be impossible to generate them. + + * Debugging (`-g') is not supported on the HP PA machine, unless you + use the preliminary GNU tools (*note Installation::.). + + * Taking the address of a label may generate errors from the HP-UX + PA assembler. GAS for the PA does not have this problem. + + * Using floating point parameters for indirect calls to static + functions will not work when using the HP assembler. There simply + is no way for GCC to specify what registers hold arguments for + static functions when using the HP assembler. GAS for the PA does + not have this problem. + + * In extremely rare cases involving some very large functions you may + receive errors from the HP linker complaining about an out of + bounds unconditional branch offset. This used to occur more often + in previous versions of GNU CC, but is now exceptionally rare. If + you should run into it, you can work around by making your + function smaller. + + * GNU CC compiled code sometimes emits warnings from the HP-UX + assembler of the form: + + (warning) Use of GR3 when + frame >= 8192 may cause conflict. + + These warnings are harmless and can be safely ignored. + + * The current version of the assembler (`/bin/as') for the RS/6000 + has certain problems that prevent the `-g' option in GCC from + working. Note that `Makefile.in' uses `-g' by default when + compiling `libgcc2.c'. + + IBM has produced a fixed version of the assembler. The upgraded + assembler unfortunately was not included in any of the AIX 3.2 + update PTF releases (3.2.2, 3.2.3, or 3.2.3e). Users of AIX 3.1 + should request PTF U403044 from IBM and users of AIX 3.2 should + request PTF U416277. See the file `README.RS6000' for more + details on these updates. + + You can test for the presense of a fixed assembler by using the + command + + as -u < /dev/null + + If the command exits normally, the assembler fix already is + installed. If the assembler complains that "-u" is an unknown + flag, you need to order the fix. + + * On the IBM RS/6000, compiling code of the form + + extern int foo; + + ... foo ... + + static int foo; + + will cause the linker to report an undefined symbol `foo'. + Although this behavior differs from most other systems, it is not a + bug because redefining an `extern' variable as `static' is + undefined in ANSI C. + + * AIX on the RS/6000 provides support (NLS) for environments outside + of the United States. Compilers and assemblers use NLS to support + locale-specific representations of various objects including + floating-point numbers ("." vs "," for separating decimal + fractions). There have been problems reported where the library + linked with GCC does not produce the same floating-point formats + that the assembler accepts. If you have this problem, set the + LANG environment variable to "C" or "En_US". + + * Even if you specify `-fdollars-in-identifiers', you cannot + successfully use `$' in identifiers on the RS/6000 due to a + restriction in the IBM assembler. GAS supports these identifiers. + + * On the RS/6000, XLC version 1.3.0.0 will miscompile `jump.c'. XLC + version 1.3.0.1 or later fixes this problem. You can obtain + XLC-1.3.0.2 by requesting PTF 421749 from IBM. + + * There is an assembler bug in versions of DG/UX prior to 5.4.2.01 + that occurs when the `fldcr' instruction is used. GNU CC uses + `fldcr' on the 88100 to serialize volatile memory references. Use + the option `-mno-serialize-volatile' if your version of the + assembler has this bug. + + * On VMS, GAS versions 1.38.1 and earlier may cause spurious warning + messages from the linker. These warning messages complain of + mismatched psect attributes. You can ignore them. *Note VMS + Install::. + + * On NewsOS version 3, if you include both of the files `stddef.h' + and `sys/types.h', you get an error because there are two typedefs + of `size_t'. You should change `sys/types.h' by adding these + lines around the definition of `size_t': + + #ifndef _SIZE_T + #define _SIZE_T + ACTUAL TYPEDEF HERE + #endif + + * On the Alliant, the system's own convention for returning + structures and unions is unusual, and is not compatible with GNU + CC no matter what options are used. + + * On the IBM RT PC, the MetaWare HighC compiler (hc) uses a different + convention for structure and union returning. Use the option + `-mhc-struct-return' to tell GNU CC to use a convention compatible + with it. + + * On Ultrix, the Fortran compiler expects registers 2 through 5 to + be saved by function calls. However, the C compiler uses + conventions compatible with BSD Unix: registers 2 through 5 may be + clobbered by function calls. + + GNU CC uses the same convention as the Ultrix C compiler. You can + use these options to produce code compatible with the Fortran + compiler: + + -fcall-saved-r2 -fcall-saved-r3 -fcall-saved-r4 -fcall-saved-r5 + + * On the WE32k, you may find that programs compiled with GNU CC do + not work with the standard shared C library. You may need to link + with the ordinary C compiler. If you do so, you must specify the + following options: + + -L/usr/local/lib/gcc-lib/we32k-att-sysv/2.7.1 -lgcc -lc_s + + The first specifies where to find the library `libgcc.a' specified + with the `-lgcc' option. + + GNU CC does linking by invoking `ld', just as `cc' does, and there + is no reason why it *should* matter which compilation program you + use to invoke `ld'. If someone tracks this problem down, it can + probably be fixed easily. + + * On the Alpha, you may get assembler errors about invalid syntax as + a result of floating point constants. This is due to a bug in the + C library functions `ecvt', `fcvt' and `gcvt'. Given valid + floating point numbers, they sometimes print `NaN'. + + * On Irix 4.0.5F (and perhaps in some other versions), an assembler + bug sometimes reorders instructions incorrectly when optimization + is turned on. If you think this may be happening to you, try + using the GNU assembler; GAS version 2.1 supports ECOFF on Irix. + + Or use the `-noasmopt' option when you compile GNU CC with itself, + and then again when you compile your program. (This is a temporary + kludge to turn off assembler optimization on Irix.) If this + proves to be what you need, edit the assembler spec in the file + `specs' so that it unconditionally passes `-O0' to the assembler, + and never passes `-O2' or `-O3'.  -File: gcc.info, Node: Output Template, Next: Output Statement, Prev: RTL Template, Up: Machine Desc +File: gcc.info, Node: External Bugs, Next: Incompatibilities, Prev: Interoperation, Up: Trouble -Output Templates and Operand Substitution -========================================= +Problems Compiling Certain Programs +=================================== - The "output template" is a string which specifies how to output the -assembler code for an instruction pattern. Most of the template is a -fixed string which is output literally. The character `%' is used to -specify where to substitute an operand; it can also be used to identify -places where different variants of the assembler require different -syntax. - - In the simplest case, a `%' followed by a digit N says to output -operand N at that point in the string. - - `%' followed by a letter and a digit says to output an operand in an -alternate fashion. Four letters have standard, built-in meanings -described below. The machine description macro `PRINT_OPERAND' can -define additional letters with nonstandard meanings. - - `%cDIGIT' can be used to substitute an operand that is a constant -value without the syntax that normally indicates an immediate operand. - - `%nDIGIT' is like `%cDIGIT' except that the value of the constant is -negated before printing. - - `%aDIGIT' can be used to substitute an operand as if it were a -memory reference, with the actual operand treated as the address. This -may be useful when outputting a "load address" instruction, because -often the assembler syntax for such an instruction requires you to -write the operand as if it were a memory reference. - - `%lDIGIT' is used to substitute a `label_ref' into a jump -instruction. - - `%=' outputs a number which is unique to each instruction in the -entire compilation. This is useful for making local labels to be -referred to more than once in a single template that generates multiple -assembler instructions. - - `%' followed by a punctuation character specifies a substitution that -does not use an operand. Only one case is standard: `%%' outputs a `%' -into the assembler code. Other nonstandard cases can be defined in the -`PRINT_OPERAND' macro. You must also define which punctuation -characters are valid with the `PRINT_OPERAND_PUNCT_VALID_P' macro. - - The template may generate multiple assembler instructions. Write -the text for the instructions, with `\;' between them. - - When the RTL contains two operands which are required by constraint -to match each other, the output template must refer only to the -lower-numbered operand. Matching operands are not always identical, and -the rest of the compiler arranges to put the proper RTL expression for -printing into the lower-numbered operand. - - One use of nonstandard letters or punctuation following `%' is to -distinguish between different assembler languages for the same machine; -for example, Motorola syntax versus MIT syntax for the 68000. Motorola -syntax requires periods in most opcode names, while MIT syntax does -not. For example, the opcode `movel' in MIT syntax is `move.l' in -Motorola syntax. The same file of patterns is used for both kinds of -output syntax, but the character sequence `%.' is used in each place -where Motorola syntax wants a period. The `PRINT_OPERAND' macro for -Motorola syntax defines the sequence to output a period; the macro for -MIT syntax defines it to do nothing. + Certain programs have problems compiling. - -File: gcc.info, Node: Output Statement, Next: Constraints, Prev: Output Template, Up: Machine Desc + * Parse errors may occur compiling X11 on a Decstation running + Ultrix 4.2 because of problems in DEC's versions of the X11 header + files `X11/Xlib.h' and `X11/Xutil.h'. People recommend adding + `-I/usr/include/mit' to use the MIT versions of the header files, + using the `-traditional' switch to turn off ANSI C, or fixing the + header files by adding this: -C Statements for Generating Assembler Output -============================================ + #ifdef __STDC__ + #define NeedFunctionPrototypes 0 + #endif - Often a single fixed template string cannot produce correct and -efficient assembler code for all the cases that are recognized by a -single instruction pattern. For example, the opcodes may depend on the -kinds of operands; or some unfortunate combinations of operands may -require extra machine instructions. - - If the output control string starts with a `@', then it is actually -a series of templates, each on a separate line. (Blank lines and -leading spaces and tabs are ignored.) The templates correspond to the -pattern's constraint alternatives (*note Multi-Alternative::.). For -example, if a target machine has a two-address add instruction `addr' -to add into a register and another `addm' to add a register to memory, -you might write this pattern: - - (define_insn "addsi3" - [(set (match_operand:SI 0 "general_operand" "=r,m") - (plus:SI (match_operand:SI 1 "general_operand" "0,0") - (match_operand:SI 2 "general_operand" "g,r")))] - "" - "@ - addr %2,%0 - addm %2,%0") - - If the output control string starts with a `*', then it is not an -output template but rather a piece of C program that should compute a -template. It should execute a `return' statement to return the -template-string you want. Most such templates use C string literals, -which require doublequote characters to delimit them. To include these -doublequote characters in the string, prefix each one with `\'. - - The operands may be found in the array `operands', whose C data type -is `rtx []'. - - It is very common to select different ways of generating assembler -code based on whether an immediate operand is within a certain range. -Be careful when doing this, because the result of `INTVAL' is an -integer on the host machine. If the host machine has more bits in an -`int' than the target machine has in the mode in which the constant -will be used, then some of the bits you get from `INTVAL' will be -superfluous. For proper results, you must carefully disregard the -values of those bits. - - It is possible to output an assembler instruction and then go on to -output or compute more of them, using the subroutine `output_asm_insn'. - This receives two arguments: a template-string and a vector of -operands. The vector may be `operands', or it may be another array of -`rtx' that you declare locally and initialize yourself. - - When an insn pattern has multiple alternatives in its constraints, -often the appearance of the assembler code is determined mostly by -which alternative was matched. When this is so, the C code can test -the variable `which_alternative', which is the ordinal number of the -alternative that was actually satisfied (0 for the first, 1 for the -second alternative, etc.). - - For example, suppose there are two opcodes for storing zero, `clrreg' -for registers and `clrmem' for memory locations. Here is how a pattern -could use `which_alternative' to choose between them: - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r,m") - (const_int 0))] - "" - "* - return (which_alternative == 0 - ? \"clrreg %0\" : \"clrmem %0\"); - ") - - The example above, where the assembler code to generate was *solely* -determined by the alternative, could also have been specified as -follows, having the output control string start with a `@': - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r,m") - (const_int 0))] - "" - "@ - clrreg %0 - clrmem %0") + * If you have trouble compiling Perl on a SunOS 4 system, it may be + because Perl specifies `-I/usr/ucbinclude'. This accesses the + unfixed header files. Perl specifies the options - -File: gcc.info, Node: Constraints, Next: Standard Names, Prev: Output Statement, Up: Machine Desc + -traditional -Dvolatile=__volatile__ + -I/usr/include/sun -I/usr/ucbinclude + -fpcc-struct-return -Operand Constraints -=================== + most of which are unnecessary with GCC 2.4.5 and newer versions. + You can make a properly working Perl by setting `ccflags' to + `-fwritable-strings' (implied by the `-traditional' in the + original options) and `cppflags' to empty in `config.sh', then + typing `./doSH; make depend; make'. - Each `match_operand' in an instruction pattern can specify a -constraint for the type of operands allowed. Constraints can say -whether an operand may be in a register, and which kinds of register; -whether the operand can be a memory reference, and which kinds of -address; whether the operand may be an immediate constant, and which -possible values it may have. Constraints can also require two operands -to match. + * On various 386 Unix systems derived from System V, including SCO, + ISC, and ESIX, you may get error messages about running out of + virtual memory while compiling certain programs. -* Menu: + You can prevent this problem by linking GNU CC with the GNU malloc + (which thus replaces the malloc that comes with the system). GNU + malloc is available as a separate package, and also in the file + `src/gmalloc.c' in the GNU Emacs 19 distribution. + + If you have installed GNU malloc as a separate library package, + use this option when you relink GNU CC: + + MALLOC=/usr/local/lib/libgmalloc.a + + Alternatively, if you have compiled `gmalloc.c' from Emacs 19, copy + the object file to `gmalloc.o' and use this option when you relink + GNU CC: -* Simple Constraints:: Basic use of constraints. -* Multi-Alternative:: When an insn has two alternative constraint-patterns. -* Class Preferences:: Constraints guide which hard register to put things in. -* Modifiers:: More precise control over effects of constraints. -* No Constraints:: Describing a clean machine without constraints. + MALLOC=gmalloc.o  -File: gcc.info, Node: Simple Constraints, Next: Multi-Alternative, Prev: Constraints, Up: Constraints +File: gcc.info, Node: Incompatibilities, Next: Fixed Headers, Prev: External Bugs, Up: Trouble -Simple Constraints ------------------- +Incompatibilities of GNU CC +=========================== - The simplest kind of constraint is a string full of letters, each of -which describes one kind of operand that is permitted. Here are the -letters that are allowed: - -`m' - A memory operand is allowed, with any kind of address that the - machine supports in general. - -`o' - A memory operand is allowed, but only if the address is - "offsettable". This means that adding a small integer (actually, - the width in bytes of the operand, as determined by its machine - mode) may be added to the address and the result is also a valid - memory address. - - For example, an address which is constant is offsettable; so is an - address that is the sum of a register and a constant (as long as a - slightly larger constant is also within the range of - address-offsets supported by the machine); but an autoincrement or - autodecrement address is not offsettable. More complicated - indirect/indexed addresses may or may not be offsettable depending - on the other addressing modes that the machine supports. - - Note that in an output operand which can be matched by another - operand, the constraint letter `o' is valid only when accompanied - by both `<' (if the target machine has predecrement addressing) - and `>' (if the target machine has preincrement addressing). - -`V' - A memory operand that is not offsettable. In other words, - anything that would fit the `m' constraint but not the `o' - constraint. - -`<' - A memory operand with autodecrement addressing (either - predecrement or postdecrement) is allowed. - -`>' - A memory operand with autoincrement addressing (either - preincrement or postincrement) is allowed. - -`r' - A register operand is allowed provided that it is in a general - register. - -`d', `a', `f', ... - Other letters can be defined in machine-dependent fashion to stand - for particular classes of registers. `d', `a' and `f' are defined - on the 68000/68020 to stand for data, address and floating point + There are several noteworthy incompatibilities between GNU C and most +existing (non-ANSI) versions of C. The `-traditional' option +eliminates many of these incompatibilities, *but not all*, by telling +GNU C to behave like the other C compilers. + + * GNU CC normally makes string constants read-only. If several + identical-looking string constants are used, GNU CC stores only one + copy of the string. + + One consequence is that you cannot call `mktemp' with a string + constant argument. The function `mktemp' always alters the string + its argument points to. + + Another consequence is that `sscanf' does not work on some systems + when passed a string constant as its format control string or + input. This is because `sscanf' incorrectly tries to write into + the string constant. Likewise `fscanf' and `scanf'. + + The best solution to these problems is to change the program to use + `char'-array variables with initialization strings for these + purposes instead of string constants. But if this is not possible, + you can use the `-fwritable-strings' flag, which directs GNU CC to + handle string constants the same way most C compilers do. + `-traditional' also has this effect, among others. + + * `-2147483648' is positive. + + This is because 2147483648 cannot fit in the type `int', so + (following the ANSI C rules) its data type is `unsigned long int'. + Negating this value yields 2147483648 again. + + * GNU CC does not substitute macro arguments when they appear inside + of string constants. For example, the following macro in GNU CC + + #define foo(a) "a" + + will produce output `"a"' regardless of what the argument A is. + + The `-traditional' option directs GNU CC to handle such cases + (among others) in the old-fashioned (non-ANSI) fashion. + + * When you use `setjmp' and `longjmp', the only automatic variables + guaranteed to remain valid are those declared `volatile'. This is + a consequence of automatic register allocation. Consider this + function: + + jmp_buf j; + + foo () + { + int a, b; + + a = fun1 (); + if (setjmp (j)) + return a; + + a = fun2 (); + /* `longjmp (j)' may occur in `fun3'. */ + return a + fun3 (); + } + + Here `a' may or may not be restored to its first value when the + `longjmp' occurs. If `a' is allocated in a register, then its + first value is restored; otherwise, it keeps the last value stored + in it. + + If you use the `-W' option with the `-O' option, you will get a + warning when GNU CC thinks such a problem might be possible. + + The `-traditional' option directs GNU C to put variables in the + stack by default, rather than in registers, in functions that call + `setjmp'. This results in the behavior found in traditional C + compilers. + + * Programs that use preprocessing directives in the middle of macro + arguments do not work with GNU CC. For example, a program like + this will not work: + + foobar ( + #define luser + hack) + + ANSI C does not permit such a construct. It would make sense to + support it when `-traditional' is used, but it is too much work to + implement. + + * Declarations of external variables and functions within a block + apply only to the block containing the declaration. In other + words, they have the same scope as any other declaration in the + same place. + + In some other C compilers, a `extern' declaration affects all the + rest of the file even if it happens within a block. + + The `-traditional' option directs GNU C to treat all `extern' + declarations as global, like traditional compilers. + + * In traditional C, you can combine `long', etc., with a typedef + name, as shown here: + + typedef int foo; + typedef long foo bar; + + In ANSI C, this is not allowed: `long' and other type modifiers + require an explicit `int'. Because this criterion is expressed by + Bison grammar rules rather than C code, the `-traditional' flag + cannot alter it. + + * PCC allows typedef names to be used as function parameters. The + difficulty described immediately above applies here too. + + * PCC allows whitespace in the middle of compound assignment + operators such as `+='. GNU CC, following the ANSI standard, does + not allow this. The difficulty described immediately above + applies here too. + + * GNU CC complains about unterminated character constants inside of + preprocessing conditionals that fail. Some programs have English + comments enclosed in conditionals that are guaranteed to fail; if + these comments contain apostrophes, GNU CC will probably report an + error. For example, this code would produce an error: + + #if 0 + You can't expect this to work. + #endif + + The best solution to such a problem is to put the text into an + actual C comment delimited by `/*...*/'. However, `-traditional' + suppresses these error messages. + + * Many user programs contain the declaration `long time ();'. In the + past, the system header files on many systems did not actually + declare `time', so it did not matter what type your program + declared it to return. But in systems with ANSI C headers, `time' + is declared to return `time_t', and if that is not the same as + `long', then `long time ();' is erroneous. + + The solution is to change your program to use `time_t' as the + return type of `time'. + + * When compiling functions that return `float', PCC converts it to a + double. GNU CC actually returns a `float'. If you are concerned + with PCC compatibility, you should declare your functions to return + `double'; you might as well say what you mean. + + * When compiling functions that return structures or unions, GNU CC + output code normally uses a method different from that used on most + versions of Unix. As a result, code compiled with GNU CC cannot + call a structure-returning function compiled with PCC, and vice + versa. + + The method used by GNU CC is as follows: a structure or union + which is 1, 2, 4 or 8 bytes long is returned like a scalar. A + structure or union with any other size is stored into an address + supplied by the caller (usually in a special, fixed register, but + on some machines it is passed on the stack). The + machine-description macros `STRUCT_VALUE' and + `STRUCT_INCOMING_VALUE' tell GNU CC where to pass this address. + + By contrast, PCC on most target machines returns structures and + unions of any size by copying the data into an area of static + storage, and then returning the address of that storage as if it + were a pointer value. The caller must copy the data from that + memory area to the place where the value is wanted. GNU CC does + not use this method because it is slower and nonreentrant. + + On some newer machines, PCC uses a reentrant convention for all + structure and union returning. GNU CC on most of these machines + uses a compatible convention when returning structures and unions + in memory, but still returns small structures and unions in registers. -`i' - An immediate integer operand (one with constant value) is allowed. - This includes symbolic constants whose values will be known only at - assembly time. - -`n' - An immediate integer operand with a known numeric value is allowed. - Many systems cannot support assembly-time constants for operands - less than a word wide. Constraints for these operands should use - `n' rather than `i'. - -`I', `J', `K', ... `P' - Other letters in the range `I' through `P' may be defined in a - machine-dependent fashion to permit immediate integer operands with - explicit integer values in specified ranges. For example, on the - 68000, `I' is defined to stand for the range of values 1 to 8. - This is the range permitted as a shift count in the shift - instructions. - -`E' - An immediate floating operand (expression code `const_double') is - allowed, but only if the target floating point format is the same - as that of the host machine (on which the compiler is running). - -`F' - An immediate floating operand (expression code `const_double') is - allowed. - -`G', `H' - `G' and `H' may be defined in a machine-dependent fashion to - permit immediate floating operands in particular ranges of values. - -`s' - An immediate integer operand whose value is not an explicit - integer is allowed. - - This might appear strange; if an insn allows a constant operand - with a value not known at compile time, it certainly must allow - any known value. So why use `s' instead of `i'? Sometimes it - allows better code to be generated. - - For example, on the 68000 in a fullword instruction it is possible - to use an immediate operand; but if the immediate value is between - -128 and 127, better code results from loading the value into a - register and using the register. This is because the load into - the register can be done with a `moveq' instruction. We arrange - for this to happen by defining the letter `K' to mean "any integer - outside the range -128 to 127", and then specifying `Ks' in the - operand constraints. - -`g' - Any register, memory or immediate integer operand is allowed, - except for registers that are not general registers. - -`X' - Any operand whatsoever is allowed, even if it does not satisfy - `general_operand'. This is normally used in the constraint of a - `match_scratch' when certain alternatives will not actually - require a scratch register. - -`0', `1', `2', ... `9' - An operand that matches the specified operand number is allowed. - If a digit is used together with letters within the same - alternative, the digit should come last. - - This is called a "matching constraint" and what it really means is - that the assembler has only a single operand that fills two roles - considered separate in the RTL insn. For example, an add insn has - two input operands and one output operand in the RTL, but on most - CISC machines an add instruction really has only two operands, one - of them an input-output operand: - - addl #35,r12 - - Matching constraints are used in these circumstances. More - precisely, the two operands that match must include one input-only - operand and one output-only operand. Moreover, the digit must be a - smaller number than the number of the operand that uses it in the - constraint. - - For operands to match in a particular case usually means that they - are identical-looking RTL expressions. But in a few special cases - specific kinds of dissimilarity are allowed. For example, `*x' as - an input operand will match `*x++' as an output operand. For - proper results in such cases, the output template should always - use the output-operand's number when printing the operand. - -`p' - An operand that is a valid memory address is allowed. This is for - "load address" and "push address" instructions. - - `p' in the constraint must be accompanied by `address_operand' as - the predicate in the `match_operand'. This predicate interprets - the mode specified in the `match_operand' as the mode of the memory - reference for which the address would be valid. - -`Q', `R', `S', ... `U' - Letters in the range `Q' through `U' may be defined in a - machine-dependent fashion to stand for arbitrary operand types. - The machine description macro `EXTRA_CONSTRAINT' is passed the - operand as its first argument and the constraint letter as its - second operand. - - A typical use for this would be to distinguish certain types of - memory references that affect other insn operands. - - Do not define these constraint letters to accept register - references (`reg'); the reload pass does not expect this and would - not handle it properly. - - In order to have valid assembler code, each operand must satisfy its -constraint. But a failure to do so does not prevent the pattern from -applying to an insn. Instead, it directs the compiler to modify the -code so that the constraint will be satisfied. Usually this is done by -copying an operand into a register. - - Contrast, therefore, the two instruction patterns that follow: - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r") - (plus:SI (match_dup 0) - (match_operand:SI 1 "general_operand" "r")))] - "" - "...") - -which has two operands, one of which must appear in two places, and - - (define_insn "" - [(set (match_operand:SI 0 "general_operand" "=r") - (plus:SI (match_operand:SI 1 "general_operand" "0") - (match_operand:SI 2 "general_operand" "r")))] - "" - "...") - -which has three operands, two of which are required by a constraint to -be identical. If we are considering an insn of the form - - (insn N PREV NEXT - (set (reg:SI 3) - (plus:SI (reg:SI 6) (reg:SI 109))) - ...) - -the first pattern would not apply at all, because this insn does not -contain two identical subexpressions in the right place. The pattern -would say, "That does not look like an add instruction; try other -patterns." The second pattern would say, "Yes, that's an add -instruction, but there is something wrong with it." It would direct -the reload pass of the compiler to generate additional insns to make -the constraint true. The results might look like this: - - (insn N2 PREV N - (set (reg:SI 3) (reg:SI 6)) - ...) - - (insn N N2 NEXT - (set (reg:SI 3) - (plus:SI (reg:SI 3) (reg:SI 109))) - ...) - - It is up to you to make sure that each operand, in each pattern, has -constraints that can handle any RTL expression that could be present for -that operand. (When multiple alternatives are in use, each pattern -must, for each possible combination of operand expressions, have at -least one alternative which can handle that combination of operands.) -The constraints don't need to *allow* any possible operand--when this is -the case, they do not constrain--but they must at least point the way to -reloading any possible operand so that it will fit. - - * If the constraint accepts whatever operands the predicate permits, - there is no problem: reloading is never necessary for this operand. - - For example, an operand whose constraints permit everything except - registers is safe provided its predicate rejects registers. - - An operand whose predicate accepts only constant values is safe - provided its constraints include the letter `i'. If any possible - constant value is accepted, then nothing less than `i' will do; if - the predicate is more selective, then the constraints may also be - more selective. - - * Any operand expression can be reloaded by copying it into a - register. So if an operand's constraints allow some kind of - register, it is certain to be safe. It need not permit all - classes of registers; the compiler knows how to copy a register - into another register of the proper class in order to make an - instruction valid. - - * A nonoffsettable memory reference can be reloaded by copying the - address into a register. So if the constraint uses the letter - `o', all memory references are taken care of. - - * A constant operand can be reloaded by allocating space in memory to - hold it as preinitialized data. Then the memory reference can be - used in place of the constant. So if the constraint uses the - letters `o' or `m', constant operands are not a problem. - - * If the constraint permits a constant and a pseudo register used in - an insn was not allocated to a hard register and is equivalent to - a constant, the register will be replaced with the constant. If - the predicate does not permit a constant and the insn is - re-recognized for some reason, the compiler will crash. Thus the - predicate must always recognize any objects allowed by the - constraint. - - If the operand's predicate can recognize registers, but the -constraint does not permit them, it can make the compiler crash. When -this operand happens to be a register, the reload pass will be stymied, -because it does not know how to copy a register temporarily into memory. + You can tell GNU CC to use a compatible convention for all + structure and union returning with the option + `-fpcc-struct-return'. + + * GNU C complains about program fragments such as `0x74ae-0x4000' + which appear to be two hexadecimal constants separated by the minus + operator. Actually, this string is a single "preprocessing token". + Each such token must correspond to one token in C. Since this + does not, GNU C prints an error message. Although it may appear + obvious that what is meant is an operator and two values, the ANSI + C standard specifically requires that this be treated as erroneous. + + A "preprocessing token" is a "preprocessing number" if it begins + with a digit and is followed by letters, underscores, digits, + periods and `e+', `e-', `E+', or `E-' character sequences. + + To make the above program fragment valid, place whitespace in + front of the minus sign. This whitespace will end the + preprocessing number.  -File: gcc.info, Node: Multi-Alternative, Next: Class Preferences, Prev: Simple Constraints, Up: Constraints +File: gcc.info, Node: Fixed Headers, Next: Standard Libraries, Prev: Incompatibilities, Up: Trouble -Multiple Alternative Constraints --------------------------------- +Fixed Header Files +================== - Sometimes a single instruction has multiple alternative sets of -possible operands. For example, on the 68000, a logical-or instruction -can combine register or an immediate value into memory, or it can -combine any kind of operand into a register; but it cannot combine one -memory location into another. - - These constraints are represented as multiple alternatives. An -alternative can be described by a series of letters for each operand. -The overall constraint for an operand is made from the letters for this -operand from the first alternative, a comma, the letters for this -operand from the second alternative, a comma, and so on until the last -alternative. Here is how it is done for fullword logical-or on the -68000: - - (define_insn "iorsi3" - [(set (match_operand:SI 0 "general_operand" "=m,d") - (ior:SI (match_operand:SI 1 "general_operand" "%0,0") - (match_operand:SI 2 "general_operand" "dKs,dmKs")))] - ...) - - The first alternative has `m' (memory) for operand 0, `0' for -operand 1 (meaning it must match operand 0), and `dKs' for operand 2. -The second alternative has `d' (data register) for operand 0, `0' for -operand 1, and `dmKs' for operand 2. The `=' and `%' in the -constraints apply to all the alternatives; their meaning is explained -in the next section (*note Class Preferences::.). - - If all the operands fit any one alternative, the instruction is -valid. Otherwise, for each alternative, the compiler counts how many -instructions must be added to copy the operands so that that -alternative applies. The alternative requiring the least copying is -chosen. If two alternatives need the same amount of copying, the one -that comes first is chosen. These choices can be altered with the `?' -and `!' characters: - -`?' - Disparage slightly the alternative that the `?' appears in, as a - choice when no alternative applies exactly. The compiler regards - this alternative as one unit more costly for each `?' that appears - in it. + GNU CC needs to install corrected versions of some system header +files. This is because most target systems have some header files that +won't work with GNU CC unless they are changed. Some have bugs, some +are incompatible with ANSI C, and some depend on special features of +other compilers. + + Installing GNU CC automatically creates and installs the fixed header +files, by running a program called `fixincludes' (or for certain +targets an alternative such as `fixinc.svr4'). Normally, you don't +need to pay attention to this. But there are cases where it doesn't do +the right thing automatically. + + * If you update the system's header files, such as by installing a + new system version, the fixed header files of GNU CC are not + automatically updated. The easiest way to update them is to + reinstall GNU CC. (If you want to be clever, look in the makefile + and you can find a shortcut.) + + * On some systems, in particular SunOS 4, header file directories + contain machine-specific symbolic links in certain places. This + makes it possible to share most of the header files among hosts + running the same version of SunOS 4 on different machine models. + + The programs that fix the header files do not understand this + special way of using symbolic links; therefore, the directory of + fixed header files is good only for the machine model used to + build it. + + In SunOS 4, only programs that look inside the kernel will notice + the difference between machine models. Therefore, for most + purposes, you need not be concerned about this. + + It is possible to make separate sets of fixed header files for the + different machine models, and arrange a structure of symbolic + links so as to use the proper set, but you'll have to do this by + hand. + + * On Lynxos, GNU CC by default does not fix the header files. This + is because bugs in the shell cause the `fixincludes' script to + fail. + + This means you will encounter problems due to bugs in the system + header files. It may be no comfort that they aren't GNU CC's + fault, but it does mean that there's nothing for us to do about + them. + + +File: gcc.info, Node: Standard Libraries, Next: Disappointments, Prev: Fixed Headers, Up: Trouble + +Standard Libraries +================== -`!' - Disparage severely the alternative that the `!' appears in. This - alternative can still be used if it fits without reloading, but if - reloading is needed, some other alternative will be used. - - When an insn pattern has multiple alternatives in its constraints, -often the appearance of the assembler code is determined mostly by which -alternative was matched. When this is so, the C code for writing the -assembler code can use the variable `which_alternative', which is the -ordinal number of the alternative that was actually satisfied (0 for -the first, 1 for the second alternative, etc.). *Note Output -Statement::. + GNU CC by itself attempts to be what the ISO/ANSI C standard calls a +"conforming freestanding implementation". This means all ANSI C +language features are available, as well as the contents of `float.h', +`limits.h', `stdarg.h', and `stddef.h'. The rest of the C library is +supplied by the vendor of the operating system. If that C library +doesn't conform to the C standards, then your programs might get +warnings (especially when using `-Wall') that you don't expect. + + For example, the `sprintf' function on SunOS 4.1.3 returns `char *' +while the C standard says that `sprintf' returns an `int'. The +`fixincludes' program could make the prototype for this function match +the Standard, but that would be wrong, since the function will still +return `char *'. + + If you need a Standard compliant library, then you need to find one, +as GNU CC does not provide one. The GNU C library (called `glibc') has +been ported to a number of operating systems, and provides ANSI/ISO, +POSIX, BSD and SystemV compatibility. You could also ask your operating +system vendor if newer libraries are available.  -File: gcc.info, Node: Class Preferences, Next: Modifiers, Prev: Multi-Alternative, Up: Constraints +File: gcc.info, Node: Disappointments, Next: C++ Misunderstandings, Prev: Standard Libraries, Up: Trouble -Register Class Preferences --------------------------- +Disappointments and Misunderstandings +===================================== + + These problems are perhaps regrettable, but we don't know any +practical way around them. - The operand constraints have another function: they enable the -compiler to decide which kind of hardware register a pseudo register is -best allocated to. The compiler examines the constraints that apply to -the insns that use the pseudo register, looking for the -machine-dependent letters such as `d' and `a' that specify classes of -registers. The pseudo register is put in whichever class gets the most -"votes". The constraint letters `g' and `r' also vote: they vote in -favor of a general register. The machine description says which -registers are considered general. + * Certain local variables aren't recognized by debuggers when you + compile with optimization. - Of course, on some machines all registers are equivalent, and no -register classes are defined. Then none of this complexity is relevant. + This occurs because sometimes GNU CC optimizes the variable out of + existence. There is no way to tell the debugger how to compute the + value such a variable "would have had", and it is not clear that + would be desirable anyway. So GNU CC simply does not mention the + eliminated variable when it writes debugging information. + + You have to expect a certain amount of disagreement between the + executable and your source code, when you use optimization. + + * Users often think it is a bug when GNU CC reports an error for code + like this: + + int foo (struct mumble *); + + struct mumble { ... }; + + int foo (struct mumble *x) + { ... } + + This code really is erroneous, because the scope of `struct + mumble' in the prototype is limited to the argument list + containing it. It does not refer to the `struct mumble' defined + with file scope immediately below--they are two unrelated types + with similar names in different scopes. + + But in the definition of `foo', the file-scope type is used + because that is available to be inherited. Thus, the definition + and the prototype do not match, and you get an error. + + This behavior may seem silly, but it's what the ANSI standard + specifies. It is easy enough for you to make your code work by + moving the definition of `struct mumble' above the prototype. + It's not worth being incompatible with ANSI C just to avoid an + error for the example shown above. + + * Accesses to bitfields even in volatile objects works by accessing + larger objects, such as a byte or a word. You cannot rely on what + size of object is accessed in order to read or write the bitfield; + it may even vary for a given bitfield according to the precise + usage. + + If you care about controlling the amount of memory that is + accessed, use volatile but do not use bitfields. + + * GNU CC comes with shell scripts to fix certain known problems in + system header files. They install corrected copies of various + header files in a special directory where only GNU CC will + normally look for them. The scripts adapt to various systems by + searching all the system header files for the problem cases that + we know about. + + If new system header files are installed, nothing automatically + arranges to update the corrected header files. You will have to + reinstall GNU CC to fix the new header files. More specifically, + go to the build directory and delete the files `stmp-fixinc' and + `stmp-headers', and the subdirectory `include'; then do `make + install' again. + + * On 68000 systems, you can get paradoxical results if you test the + precise values of floating point numbers. For example, you can + find that a floating point value which is not a NaN is not equal + to itself. This results from the fact that the the floating point + registers hold a few more bits of precision than fit in a `double' + in memory. Compiled code moves values between memory and floating + point registers at its convenience, and moving them into memory + truncates them. + + You can partially avoid this problem by using the `-ffloat-store' + option (*note Optimize Options::.). + + * On the MIPS, variable argument functions using `varargs.h' cannot + have a floating point value for the first argument. The reason + for this is that in the absence of a prototype in scope, if the + first argument is a floating point, it is passed in a floating + point register, rather than an integer register. + + If the code is rewritten to use the ANSI standard `stdarg.h' + method of variable arguments, and the prototype is in scope at the + time of the call, everything will work fine.  -File: gcc.info, Node: Modifiers, Next: No Constraints, Prev: Class Preferences, Up: Constraints +File: gcc.info, Node: C++ Misunderstandings, Next: Protoize Caveats, Prev: Disappointments, Up: Trouble -Constraint Modifier Characters ------------------------------- +Common Misunderstandings with GNU C++ +===================================== -`=' - Means that this operand is write-only for this instruction: the - previous value is discarded and replaced by output data. - -`+' - Means that this operand is both read and written by the - instruction. - - When the compiler fixes up the operands to satisfy the constraints, - it needs to know which operands are inputs to the instruction and - which are outputs from it. `=' identifies an output; `+' - identifies an operand that is both input and output; all other - operands are assumed to be input only. - -`&' - Means (in a particular alternative) that this operand is written - before the instruction is finished using the input operands. - Therefore, this operand may not lie in a register that is used as - an input operand or as part of any memory address. - - `&' applies only to the alternative in which it is written. In - constraints with multiple alternatives, sometimes one alternative - requires `&' while others do not. See, for example, the `movdf' - insn of the 68000. - - `&' does not obviate the need to write `='. - -`%' - Declares the instruction to be commutative for this operand and the - following operand. This means that the compiler may interchange - the two operands if that is the cheapest way to make all operands - fit the constraints. This is often used in patterns for addition - instructions that really have only two operands: the result must - go in one of the arguments. Here for example, is how the 68000 - halfword-add instruction is defined: - - (define_insn "addhi3" - [(set (match_operand:HI 0 "general_operand" "=m,r") - (plus:HI (match_operand:HI 1 "general_operand" "%0,0") - (match_operand:HI 2 "general_operand" "di,g")))] - ...) - -`#' - Says that all following characters, up to the next comma, are to be - ignored as a constraint. They are significant only for choosing - register preferences. - -`*' - Says that the following character should be ignored when choosing - register preferences. `*' has no effect on the meaning of the - constraint as a constraint, and no effect on reloading. - - Here is an example: the 68000 has an instruction to sign-extend a - halfword in a data register, and can also sign-extend a value by - copying it into an address register. While either kind of - register is acceptable, the constraints on an address-register - destination are less strict, so it is best if register allocation - makes an address register its goal. Therefore, `*' is used so - that the `d' constraint letter (for data register) is ignored when - computing register preferences. - - (define_insn "extendhisi2" - [(set (match_operand:SI 0 "general_operand" "=*d,a") - (sign_extend:SI - (match_operand:HI 1 "general_operand" "0,g")))] - ...) + C++ is a complex language and an evolving one, and its standard +definition (the ANSI C++ draft standard) is also evolving. As a result, +your C++ compiler may occasionally surprise you, even when its behavior +is correct. This section discusses some areas that frequently give +rise to questions of this sort. + +* Menu: + +* Static Definitions:: Static member declarations are not definitions +* Temporaries:: Temporaries may vanish before you expect  -File: gcc.info, Node: No Constraints, Prev: Modifiers, Up: Constraints +File: gcc.info, Node: Static Definitions, Next: Temporaries, Up: C++ Misunderstandings + +Declare *and* Define Static Members +----------------------------------- -Not Using Constraints ---------------------- + When a class has static data members, it is not enough to *declare* +the static member; you must also *define* it. For example: - Some machines are so clean that operand constraints are not -required. For example, on the Vax, an operand valid in one context is -valid in any other context. On such a machine, every operand -constraint would be `g', excepting only operands of "load address" -instructions which are written as if they referred to a memory -location's contents but actual refer to its address. They would have -constraint `p'. - - For such machines, instead of writing `g' and `p' for all the -constraints, you can choose to write a description with empty -constraints. Then you write `""' for the constraint in every -`match_operand'. Address operands are identified by writing an -`address' expression around the `match_operand', not by their -constraints. - - When the machine description has just empty constraints, certain -parts of compilation are skipped, making the compiler faster. However, -few machines actually do not need constraints; all machine descriptions -now in existence use constraints. + class Foo + { + ... + void method(); + static int bar; + }; + + This declaration only establishes that the class `Foo' has an `int' +named `Foo::bar', and a member function named `Foo::method'. But you +still need to define *both* `method' and `bar' elsewhere. According to +the draft ANSI standard, you must supply an initializer in one (and +only one) source file, such as: + + int Foo::bar = 0; + + Other C++ compilers may not correctly implement the standard +behavior. As a result, when you switch to `g++' from one of these +compilers, you may discover that a program that appeared to work +correctly in fact does not conform to the standard: `g++' reports as +undefined symbols any static data members that lack definitions. - \ No newline at end of file