--- gcc/gcc.info-13 2018/04/24 17:56:06 1.1.1.3 +++ gcc/gcc.info-13 2018/04/24 18:11:10 1.1.1.6 @@ -1,9 +1,12 @@ -This is Info file gcc.info, produced by Makeinfo-1.47 from the input +This is Info file gcc.info, produced by Makeinfo-1.54 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 675 Massachusetts Avenue +Cambridge, MA 02139 USA + + Copyright (C) 1988, 1989, 1992, 1993 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -11,1107 +14,1085 @@ preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the sections entitled "GNU General Public License" and "Boycott" -are included exactly as in the original, and provided that the entire -resulting derived work is distributed under the terms of a permission -notice identical to this one. +that the sections entitled "GNU General Public License" and "Protect +Your Freedom--Fight `Look And Feel'" are included exactly as in the +original, and provided that the entire resulting derived work is +distributed under the terms of a permission notice identical to this +one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public -License" and "Boycott", and this permission notice, may be included in -translations approved by the Free Software Foundation instead of in the -original English. +License" and "Protect Your Freedom--Fight `Look And Feel'", and this +permission notice, may be included in translations approved by the Free +Software Foundation instead of in the original English.  -File: gcc.info, Node: Driver, Next: Run-time Target, Up: Target Macros - -Controlling the Compilation Driver, `gcc' -========================================= - -`SWITCH_TAKES_ARG (CHAR)' - A C expression which determines whether the option `-CHAR' takes - arguments. The value should be the number of arguments that - option takes--zero, for many options. - - By default, this macro is defined to handle the standard options - properly. You need not define it unless you wish to add additional - options which take arguments. - -`WORD_SWITCH_TAKES_ARG (NAME)' - A C expression which determines whether the option `-NAME' takes - arguments. The value should be the number of arguments that - option takes--zero, for many options. This macro rather than - `SWITCH_TAKES_ARG' is used for multi-character option names. - - By default, this macro is defined to handle the standard options - properly. You need not define it unless you wish to add additional - options which take arguments. - -`SWITCHES_NEED_SPACES' - A string-valued C expression which is nonempty if the linker needs - a space between the `-L' or `-o' option and its argument. - - If this macro is not defined, the default value is 0. - -`CPP_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to CPP. It can also specify how to translate options you - give to GNU CC into options for GNU CC to pass to the CPP. - - Do not define this macro if it does not need to do anything. - -`SIGNED_CHAR_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to CPP. By default, this macro is defined to pass the option - `-D__CHAR_UNSIGNED__' to CPP if `char' will be treated as - `unsigned char' by `cc1'. - - Do not define this macro unless you need to override the default - definition. - -`CC1_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to `cc1'. It can also specify how to translate options you - give to GNU CC into options for GNU CC to pass to the `cc1'. - - Do not define this macro if it does not need to do anything. - -`CC1PLUS_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to `cc1plus'. It can also specify how to translate options - you give to GNU CC into options for GNU CC to pass to the - `cc1plus'. - - Do not define this macro if it does not need to do anything. - -`ASM_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to the assembler. It can also specify how to translate - options you give to GNU CC into options for GNU CC to pass to the - assembler. See the file `sun3.h' for an example of this. - - Do not define this macro if it does not need to do anything. - -`ASM_FINAL_SPEC' - A C string constant that tells the GNU CC driver program how to - run any programs which cleanup after the normal assembler. - Normally, this is not needed. See the file `mips.h' for an - example of this. - - Do not define this macro if it does not need to do anything. - -`LINK_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to the linker. It can also specify how to translate options - you give to GNU CC into options for GNU CC to pass to the linker. - - Do not define this macro if it does not need to do anything. - -`LIB_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `LIB_SPEC' is used at the end - of the command given to the linker. - - If this macro is not defined, a default is provided that loads the - standard C library from the usual place. See `gcc.c'. - -`STARTFILE_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `STARTFILE_SPEC' is used at the - very beginning of the command given to the linker. - - If this macro is not defined, a default is provided that loads the - standard C startup file from the usual place. See `gcc.c'. - -`ENDFILE_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `ENDFILE_SPEC' is used at the - very end of the command given to the linker. - - Do not define this macro if it does not need to do anything. - -`LINK_LIBGCC_SPECIAL' - Define this macro meaning that `gcc' should find the library - `libgcc.a' by hand, rather than passing the argument `-lgcc' to - tell the linker to do the search. - -`RELATIVE_PREFIX_NOT_LINKDIR' - Define this macro to tell `gcc' that it should only translate a - `-B' prefix into a `-L' linker option if the prefix indicates an - absolute file name. - -`STANDARD_EXEC_PREFIX' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/lib/gcc-lib/' as the default - prefix to try when searching for the executable files of the - compiler. - -`MD_EXEC_PREFIX' - If defined, this macro is an additional prefix to try after - `STANDARD_EXEC_PREFIX'. `MD_EXEC_PREFIX' is not searched when the - `-b' option is used, or the compiler is built as a cross compiler. - -`STANDARD_STARTFILE_PREFIX' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/lib/' as the default prefix to - try when searching for startup files such as `crt0.o'. - -`MD_STARTFILE_PREFIX' - If defined, this macro supplies an additional prefix to try after - the standard prefixes. `MD_EXEC_PREFIX' is not searched when the - `-b' option is used, or when the compiler is built as a cross - compiler. - -`MD_STARTFILE_PREFIX_1' - If defined, this macro supplies yet another prefix to try after the - standard prefixes. It is not searched when the `-b' option is - used, or when the compiler is built as a cross compiler. - -`LOCAL_INCLUDE_DIR' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/include' as the default prefix - to try when searching for local header files. `LOCAL_INCLUDE_DIR' - comes before `SYSTEM_INCLUDE_DIR' in the search order. - - Cross compilers do not use this macro and do not search either - `/usr/local/include' or its replacement. - -`SYSTEM_INCLUDE_DIR' - Define this macro as a C string constant if you wish to specify a - system-specific directory to search for header files before the - standard directory. `SYSTEM_INCLUDE_DIR' comes before - `STANDARD_INCLUDE_DIR' in the search order. - - Cross compilers do not use this macro and do not search the - directory specified. - -`STANDARD_INCLUDE_DIR' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/include' as the default prefix to try - when searching for header files. - - Cross compilers do not use this macro and do not search either - `/usr/include' or its replacement. - -`INCLUDE_DEFAULTS' - Define this macro if you wish to override the entire default - search path for include files. The default search path includes - `GPLUSPLUS_INCLUDE_DIR', `GCC_INCLUDE_DIR', `LOCAL_INCLUDE_DIR', - `SYSTEM_INCLUDE_DIR', and `STANDARD_INCLUDE_DIR'. In addition, - the macros `GPLUSPLUS_INCLUDE_DIR' and `GCC_INCLUDE_DIR' are - defined automatically by `Makefile', and specify private search - areas for GCC. The directory `GPLUSPLUS_INCLUDE_DIR' is used only - for C++ programs. - - The definition should be an initializer for an array of structures. - Each array element should have two elements: the directory name (a - string constant) and a flag for C++-only directories. Mark the - end of the array with a null element. For example, here is the - definition used for VMS: - - #define INCLUDE_DEFAULTS \ - { \ - { "GNU_GXX_INCLUDE:", 1}, \ - { "GNU_CC_INCLUDE:", 0}, \ - { "SYS$SYSROOT:[SYSLIB.]", 0}, \ - { ".", 0}, \ - { 0, 0} \ - } - - Here is the order of prefixes tried for exec files: - - 1. Any prefixes specified by the user with `-B'. - - 2. The environment variable `GCC_EXEC_PREFIX', if any. - - 3. The directories specified by the environment variable - `COMPILER_PATH'. - - 4. The macro `STANDARD_EXEC_PREFIX'. - - 5. `/usr/lib/gcc/'. - - 6. The macro `MD_EXEC_PREFIX', if any. - - Here is the order of prefixes tried for startfiles: - - 1. Any prefixes specified by the user with `-B'. - - 2. The environment variable `GCC_EXEC_PREFIX', if any. - - 3. The directories specified by the environment variable - `LIBRARY_PATH'. - - 4. The macro `STANDARD_EXEC_PREFIX'. - - 5. `/usr/lib/gcc/'. +File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL - 6. The macro `MD_EXEC_PREFIX', if any. +Insns +===== - 7. The macro `MD_STARTFILE_PREFIX', if any. + The RTL representation of the code for a function is a doubly-linked +chain of objects called "insns". Insns are expressions with special +codes that are used for no other purpose. Some insns are actual +instructions; others represent dispatch tables for `switch' statements; +others represent labels to jump to or various sorts of declarative +information. + + In addition to its own specific data, each insn must have a unique +id-number that distinguishes it from all other insns in the current +function (after delayed branch scheduling, copies of an insn with the +same id-number may be present in multiple places in a function, but +these copies will always be identical and will only appear inside a +`sequence'), and chain pointers to the preceding and following insns. +These three fields occupy the same position in every insn, independent +of the expression code of the insn. They could be accessed with `XEXP' +and `XINT', but instead three special macros are always used: + +`INSN_UID (I)' + Accesses the unique id of insn I. + +`PREV_INSN (I)' + Accesses the chain pointer to the insn preceding I. If I is the + first insn, this is a null pointer. + +`NEXT_INSN (I)' + Accesses the chain pointer to the insn following I. If I is the + last insn, this is a null pointer. + + The first insn in the chain is obtained by calling `get_insns'; the +last insn is the result of calling `get_last_insn'. Within the chain +delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must +always correspond: if INSN is not the first insn, + + NEXT_INSN (PREV_INSN (INSN)) == INSN + +is always true and if INSN is not the last insn, + + PREV_INSN (NEXT_INSN (INSN)) == INSN + +is always true. + + After delay slot scheduling, some of the insns in the chain might be +`sequence' expressions, which contain a vector of insns. The value of +`NEXT_INSN' in all but the last of these insns is the next insn in the +vector; the value of `NEXT_INSN' of the last insn in the vector is the +same as the value of `NEXT_INSN' for the `sequence' in which it is +contained. Similar rules apply for `PREV_INSN'. + + This means that the above invariants are not necessarily true for +insns inside `sequence' expressions. Specifically, if INSN is the +first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn +containing the `sequence' expression, as is the value of `PREV_INSN +(NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' +expression. You can use these expressions to find the containing +`sequence' expression. + + Every insn has one of the following six expression codes: + +`insn' + The expression code `insn' is used for instructions that do not + jump and do not do function calls. `sequence' expressions are + always contained in insns with code `insn' even if one of those + insns should jump or do function calls. + + Insns with code `insn' have four additional fields beyond the three + mandatory ones listed above. These four are described in a table + below. + +`jump_insn' + The expression code `jump_insn' is used for instructions that may + jump (or, more generally, may contain `label_ref' expressions). If + there is an instruction to return from the current function, it is + recorded as a `jump_insn'. + + `jump_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contains a field + `JUMP_LABEL' which is defined once jump optimization has completed. + + For simple conditional and unconditional jumps, this field + contains the `code_label' to which this insn will (possibly + conditionally) branch. In a more complex jump, `JUMP_LABEL' + records one of the labels that the insn refers to; the only way to + find the others is to scan the entire body of the insn. + + Return insns count as jumps, but since they do not refer to any + labels, they have zero in the `JUMP_LABEL' field. + +`call_insn' + The expression code `call_insn' is used for instructions that may + do function calls. It is important to distinguish these + instructions because they imply that certain registers and memory + locations may be altered unpredictably. + + A `call_insn' insn may be preceded by insns that contain a single + `use' expression and be followed by insns the contain a single + `clobber' expression. If so, these `use' and `clobber' + expressions are treated as being part of the function call. There + must not even be a `note' between the `call_insn' and the `use' or + `clobber' insns for this special treatment to take place. This is + somewhat of a kludge and will be removed in a later version of GNU + CC. + + `call_insn' insns have the same extra fields as `insn' insns, + accessed in the same way. + +`code_label' + A `code_label' insn represents a label that a jump insn can jump + to. It contains two special fields of data in addition to the + three standard ones. `CODE_LABEL_NUMBER' is used to hold the + "label number", a number that identifies this label uniquely among + all the labels in the compilation (not just in the current + function). Ultimately, the label is represented in the assembler + output as an assembler label, usually of the form `LN' where N is + the label number. + + When a `code_label' appears in an RTL expression, it normally + appears within a `label_ref' which represents the address of the + label, as a number. + + The field `LABEL_NUSES' is only defined once the jump optimization + phase is completed and contains the number of times this label is + referenced in the current function. + +`barrier' + Barriers are placed in the instruction stream when control cannot + flow past them. They are placed after unconditional jump + instructions to indicate that the jumps are unconditional and + after calls to `volatile' functions, which do not return (e.g., + `exit'). They contain no information beyond the three standard + fields. + +`note' + `note' insns are used to represent additional debugging and + declarative information. They contain two nonstandard fields, an + integer which is accessed with the macro `NOTE_LINE_NUMBER' and a + string accessed with `NOTE_SOURCE_FILE'. + + If `NOTE_LINE_NUMBER' is positive, the note represents the + position of a source line and `NOTE_SOURCE_FILE' is the source + file name that the line came from. These notes control generation + of line number data in the assembler output. + + Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a + code with one of the following values (and `NOTE_SOURCE_FILE' must + contain a null pointer): + + `NOTE_INSN_DELETED' + Such a note is completely ignorable. Some passes of the + compiler delete insns by altering them into notes of this + kind. + + `NOTE_INSN_BLOCK_BEG' + `NOTE_INSN_BLOCK_END' + These types of notes indicate the position of the beginning + and end of a level of scoping of variable names. They + control the output of debugging information. + + `NOTE_INSN_LOOP_BEG' + `NOTE_INSN_LOOP_END' + These types of notes indicate the position of the beginning + and end of a `while' or `for' loop. They enable the loop + optimizer to find loops quickly. + + `NOTE_INSN_LOOP_CONT' + Appears at the place in a loop that `continue' statements + jump to. + + `NOTE_INSN_LOOP_VTOP' + This note indicates the place in a loop where the exit test + begins for those loops in which the exit test has been + duplicated. This position becomes another virtual start of + the loop when considering loop invariants. + + `NOTE_INSN_FUNCTION_END' + Appears near the end of the function body, just before the + label that `return' statements jump to (on machine where a + single instruction does not suffice for returning). This + note may be deleted by jump optimization. + + `NOTE_INSN_SETJMP' + Appears following each call to `setjmp' or a related function. + + These codes are printed symbolically when they appear in debugging + dumps. + + The machine mode of an insn is normally `VOIDmode', but some phases +use the mode for various purposes; for example, the reload pass sets it +to `HImode' if the insn needs reloading but not register elimination +and `QImode' if both are required. The common subexpression +elimination pass sets the mode of an insn to `QImode' when it is the +first insn in a block that has already been processed. + + Here is a table of the extra fields of `insn', `jump_insn' and +`call_insn' insns: + +`PATTERN (I)' + An expression for the side effect performed by this insn. This + must be one of the following codes: `set', `call', `use', + `clobber', `return', `asm_input', `asm_output', `addr_vec', + `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', + `parallel', or `sequence'. If it is a `parallel', each element of + the `parallel' must be one these codes, except that `parallel' + expressions cannot be nested and `addr_vec' and `addr_diff_vec' + are not permitted inside a `parallel' expression. + +`INSN_CODE (I)' + An integer that says which pattern in the machine description + matches this insn, or -1 if the matching has not yet been + attempted. + + Such matching is never attempted and this field remains -1 on an + insn whose pattern consists of a single `use', `clobber', + `asm_input', `addr_vec' or `addr_diff_vec' expression. + + Matching is also never attempted on insns that result from an `asm' + statement. These contain at least one `asm_operands' expression. + The function `asm_noperands' returns a non-negative value for such + insns. + + In the debugging output, this field is printed as a number + followed by a symbolic representation that locates the pattern in + the `md' file as some small positive or negative offset from a + named pattern. + +`LOG_LINKS (I)' + A list (chain of `insn_list' expressions) giving information about + dependencies between instructions within a basic block. Neither a + jump nor a label may come between the related insns. + +`REG_NOTES (I)' + A list (chain of `expr_list' and `insn_list' expressions) giving + miscellaneous information about the insn. It is often information + pertaining to the registers used in this insn. + + The `LOG_LINKS' field of an insn is a chain of `insn_list' +expressions. Each of these has two operands: the first is an insn, and +the second is another `insn_list' expression (the next one in the +chain). The last `insn_list' in the chain has a null pointer as second +operand. The significant thing about the chain is which insns appear +in it (as first operands of `insn_list' expressions). Their order is +not significant. + + This list is originally set up by the flow analysis pass; it is a +null pointer until then. Flow only adds links for those data +dependencies which can be used for instruction combination. For each +insn, the flow analysis pass adds a link to insns which store into +registers values that are used for the first time in this insn. The +instruction scheduling pass adds extra links so that every dependence +will be represented. Links represent data dependencies, +antidependencies and output dependencies; the machine mode of the link +distinguishes these three types: antidependencies have mode +`REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and +data dependencies have mode `VOIDmode'. + + The `REG_NOTES' field of an insn is a chain similar to the +`LOG_LINKS' field but it includes `expr_list' expressions in addition +to `insn_list' expressions. There are several kinds of register notes, +which are distinguished by the machine mode, which in a register note +is really understood as being an `enum reg_note'. The first operand OP +of the note is data whose meaning depends on the kind of note. + + The macro `REG_NOTE_KIND (X)' returns the kind of register note. +Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the +register note type of X to be NEWKIND. + + Register notes are of three classes: They may say something about an +input to an insn, they may say something about an output of an insn, or +they may create a linkage between two insns. There are also a set of +values that are only used in `LOG_LINKS'. + + These register notes annotate inputs to an insn: + +`REG_DEAD' + The value in OP dies in this insn; that is to say, altering the + value immediately after this insn would not affect the future + behavior of the program. + + This does not necessarily mean that the register OP has no useful + value after this insn since it may also be an output of the insn. + In such a case, however, a `REG_DEAD' note would be redundant and + is usually not present until after the reload pass, but no code + relies on this fact. + +`REG_INC' + The register OP is incremented (or decremented; at this level + there is no distinction) by an embedded side effect inside this + insn. This means it appears in a `post_inc', `pre_inc', + `post_dec' or `pre_dec' expression. + +`REG_NONNEG' + The register OP is known to have a nonnegative value when this + insn is reached. This is used so that decrement and branch until + zero instructions, such as the m68k dbra, can be matched. + + The `REG_NONNEG' note is added to insns only if the machine + description has a `decrement_and_branch_until_zero' pattern. + +`REG_NO_CONFLICT' + This insn does not cause a conflict between OP and the item being + set by this insn even though it might appear that it does. In + other words, if the destination register and OP could otherwise be + assigned the same register, this insn does not prevent that + assignment. + + Insns with this note are usually part of a block that begins with a + `clobber' insn specifying a multi-word pseudo register (which will + be the output of the block), a group of insns that each set one + word of the value and have the `REG_NO_CONFLICT' note attached, + and a final insn that copies the output to itself with an attached + `REG_EQUAL' note giving the expression being computed. This block + is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the + first and last insns, respectively. + +`REG_LABEL' + This insn uses OP, a `code_label', but is not a `jump_insn'. The + presence of this note allows jump optimization to be aware that OP + is, in fact, being used. + + The following notes describe attributes of outputs of an insn: + +`REG_EQUIV' +`REG_EQUAL' + This note is only valid on an insn that sets only one register and + indicates that that register will be equal to OP at run time; the + scope of this equivalence differs between the two types of notes. + The value which the insn explicitly copies into the register may + look different from OP, but they will be equal at run time. If the + output of the single `set' is a `strict_low_part' expression, the + note refers to the register that is contained in `SUBREG_REG' of + the `subreg' expression. + + For `REG_EQUIV', the register is equivalent to OP throughout the + entire function, and could validly be replaced in all its + occurrences by OP. ("Validly" here refers to the data flow of the + program; simple replacement may make some insns invalid.) For + example, when a constant is loaded into a register that is never + assigned any other value, this kind of note is used. + + When a parameter is copied into a pseudo-register at entry to a + function, a note of this kind records that the register is + equivalent to the stack slot where the parameter was passed. + Although in this case the register may be set by other insns, it + is still valid to replace the register by the stack slot + throughout the function. + + In the case of `REG_EQUAL', the register that is set by this insn + will be equal to OP at run time at the end of this insn but not + necessarily elsewhere in the function. In this case, OP is + typically an arithmetic expression. For example, when a sequence + of insns such as a library call is used to perform an arithmetic + operation, this kind of note is attached to the insn that produces + or copies the final value. + + These two notes are used in different ways by the compiler passes. + `REG_EQUAL' is used by passes prior to register allocation (such as + common subexpression elimination and loop optimization) to tell + them how to think of that value. `REG_EQUIV' notes are used by + register allocation to indicate that there is an available + substitute expression (either a constant or a `mem' expression for + the location of a parameter on the stack) that may be used in + place of a register if insufficient registers are available. + + Except for stack homes for parameters, which are indicated by a + `REG_EQUIV' note and are not useful to the early optimization + passes and pseudo registers that are equivalent to a memory + location throughout there entire life, which is not detected until + later in the compilation, all equivalences are initially indicated + by an attached `REG_EQUAL' note. In the early stages of register + allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note + if OP is a constant and the insn represents the only set of its + destination register. + + Thus, compiler passes prior to register allocation need only check + for `REG_EQUAL' notes and passes subsequent to register allocation + need only check for `REG_EQUIV' notes. + +`REG_UNUSED' + The register OP being set by this insn will not be used in a + subsequent insn. This differs from a `REG_DEAD' note, which + indicates that the value in an input will not be used subsequently. + These two notes are independent; both may be present for the same + register. + +`REG_WAS_0' + The single output of this insn contained zero before this insn. + OP is the insn that set it to zero. You can rely on this note if + it is present and OP has not been deleted or turned into a `note'; + its absence implies nothing. + + These notes describe linkages between insns. They occur in pairs: +one insn has one of a pair of notes that points to a second insn, which +has the inverse note pointing back to the first insn. + +`REG_RETVAL' + This insn copies the value of a multi-insn sequence (for example, a + library call), and OP is the first insn of the sequence (for a + library call, the first insn that was generated to set up the + arguments for the library call). + + Loop optimization uses this note to treat such a sequence as a + single operation for code motion purposes and flow analysis uses + this note to delete such sequences whose results are dead. + + A `REG_EQUAL' note will also usually be attached to this insn to + provide the expression being computed by the sequence. + +`REG_LIBCALL' + This is the inverse of `REG_RETVAL': it is placed on the first + insn of a multi-insn sequence, and it points to the last one. + +`REG_CC_SETTER' +`REG_CC_USER' + On machines that use `cc0', the insns which set and use `cc0' set + and use `cc0' are adjacent. However, when branch delay slot + filling is done, this may no longer be true. In this case a + `REG_CC_USER' note will be placed on the insn setting `cc0' to + point to the insn using `cc0' and a `REG_CC_SETTER' note will be + placed on the insn using `cc0' to point to the insn setting `cc0'. + + These values are only used in the `LOG_LINKS' field, and indicate +the type of dependency that each link represents. Links which indicate +a data dependence (a read after write dependence) do not use any code, +they simply have mode `VOIDmode', and are printed without any +descriptive text. + +`REG_DEP_ANTI' + This indicates an anti dependence (a write after read dependence). + +`REG_DEP_OUTPUT' + This indicates an output dependence (a write after write + dependence). + + For convenience, the machine mode in an `insn_list' or `expr_list' +is printed using these symbolic codes in debugging dumps. + + The only difference between the expression codes `insn_list' and +`expr_list' is that the first operand of an `insn_list' is assumed to +be an insn and is printed in debugging dumps as the insn's unique id; +the first operand of an `expr_list' is printed in the ordinary way as +an expression. - 8. The macro `STANDARD_STARTFILE_PREFIX'. + +File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL - 9. `/lib/'. +RTL Representation of Function-Call Insns +========================================= - 10. `/usr/lib/'. + Insns that call subroutines have the RTL expression code `call_insn'. +These insns must satisfy special rules, and their bodies must use a +special RTL expression code, `call'. + + A `call' expression has two operands, as follows: + + (call (mem:FM ADDR) NBYTES) + +Here NBYTES is an operand that represents the number of bytes of +argument data being passed to the subroutine, FM is a machine mode +(which must equal as the definition of the `FUNCTION_MODE' macro in the +machine description) and ADDR represents the address of the subroutine. + + For a subroutine that returns no value, the `call' expression as +shown above is the entire body of the insn, except that the insn might +also contain `use' or `clobber' expressions. + + For a subroutine that returns a value whose mode is not `BLKmode', +the value is returned in a hard register. If this register's number is +R, then the body of the call insn looks like this: + + (set (reg:M R) + (call (mem:FM ADDR) NBYTES)) + +This RTL expression makes it clear (to the optimizer passes) that the +appropriate register receives a useful value in this insn. + + When a subroutine returns a `BLKmode' value, it is handled by +passing to the subroutine the address of a place to store the value. +So the call insn itself does not "return" any value, and it has the +same RTL form as a call that returns nothing. + + On some machines, the call instruction itself clobbers some register, +for example to contain the return address. `call_insn' insns on these +machines should have a body which is a `parallel' that contains both +the `call' expression and `clobber' expressions that indicate which +registers are destroyed. Similarly, if the call instruction requires +some register other than the stack pointer that is not explicitly +mentioned it its RTL, a `use' subexpression should mention that +register. + + Functions that are called are assumed to modify all registers listed +in the configuration macro `CALL_USED_REGISTERS' (*note Register +Basics::.) and, with the exception of `const' functions and library +calls, to modify all of memory. + + Insns containing just `use' expressions directly precede the +`call_insn' insn to indicate which registers contain inputs to the +function. Similarly, if registers other than those in +`CALL_USED_REGISTERS' are clobbered by the called function, insns +containing a single `clobber' follow immediately after the call to +indicate which registers.  -File: gcc.info, Node: Run-time Target, Next: Storage Layout, Prev: Driver, Up: Target Macros +File: gcc.info, Node: Sharing, Next: Reading RTL, Prev: Calls, Up: RTL -Run-time Target Specification +Structure Sharing Assumptions ============================= -`CPP_PREDEFINES' - Define this to be a string constant containing `-D' options to - define the predefined macros that identify this machine and system. - These macros will be predefined unless the `-ansi' option is - specified. - - In addition, a parallel set of macros are predefined, whose names - are made by appending `__' at the beginning and at the end. These - `__' macros are permitted by the ANSI standard, so they are - predefined regardless of whether `-ansi' is specified. - - For example, on the Sun, one can use the following value: - - "-Dmc68000 -Dsun -Dunix" - - The result is to define the macros `__mc68000__', `__sun__' and - `__unix__' unconditionally, and the macros `mc68000', `sun' and - `unix' provided `-ansi' is not specified. - -`STDC_VALUE' - Define the value to be assigned to the built-in macro `__STDC__'. - The default is the value `1'. - -`extern int target_flags;' - This declaration should be present. - -`TARGET_...' - This series of macros is to allow compiler command arguments to - enable or disable the use of optional features of the target - machine. For example, one machine description serves both the - 68000 and the 68020; a command argument tells the compiler whether - it should use 68020-only instructions or not. This command - argument works by means of a macro `TARGET_68020' that tests a bit - in `target_flags'. - - Define a macro `TARGET_FEATURENAME' for each such option. Its - definition should test a bit in `target_flags'; for example: - - #define TARGET_68020 (target_flags & 1) - - One place where these macros are used is in the - condition-expressions of instruction patterns. Note how - `TARGET_68020' appears frequently in the 68000 machine description - file, `m68k.md'. Another place they are used is in the definitions - of the other macros in the `MACHINE.h' file. - -`TARGET_SWITCHES' - This macro defines names of command options to set and clear bits - in `target_flags'. Its definition is an initializer with a - subgrouping for each command option. - - Each subgrouping contains a string constant, that defines the - option name, and a number, which contains the bits to set in - `target_flags'. A negative number says to clear bits instead; the - negative of the number is which bits to clear. The actual option - name is made by appending `-m' to the specified name. - - One of the subgroupings should have a null string. The number in - this grouping is the default value for `target_flags'. Any target - options act starting with that value. - - Here is an example which defines `-m68000' and `-m68020' with - opposite meanings, and picks the latter as the default: - - #define TARGET_SWITCHES \ - { { "68020", 1}, \ - { "68000", -1}, \ - { "", 1}} - -`TARGET_OPTIONS' - This macro is similar to `TARGET_SWITCHES' but defines names of - command options that have values. Its definition is an - initializer with a subgrouping for each command option. - - Each subgrouping contains a string constant, that defines the - fixed part of the option name, and the address of a variable. The - variable, type `char *', is set to the variable part of the given - option if the fixed part matches. The actual option name is made - by appending `-m' to the specified name. - - Here is an example which defines `-mshort-data-NUMBER'. If the - given option is `-mshort-data-512', the variable `m88k_short_data' - will be set to the string `"512"'. - - extern char *m88k_short_data; - #define TARGET_OPTIONS { { "short-data-", &m88k_short_data } } - -`TARGET_VERSION' - This macro is a C statement to print on `stderr' a string - describing the particular machine description choice. Every - machine description should define `TARGET_VERSION'. For example: - - #ifdef MOTOROLA - #define TARGET_VERSION fprintf (stderr, " (68k, Motorola syntax)"); - #else - #define TARGET_VERSION fprintf (stderr, " (68k, MIT syntax)"); - #endif - -`OVERRIDE_OPTIONS' - Sometimes certain combinations of command options do not make - sense on a particular target machine. You can define a macro - `OVERRIDE_OPTIONS' to take account of this. This macro, if - defined, is executed once just after all the command options have - been parsed. - - Don't use this macro to turn on various extra optimizations for - `-O'. That is what `OPTIMIZATION_OPTIONS' is for. - -`OPTIMIZATION_OPTIONS (LEVEL)' - Some machines may desire to change what optimizations are - performed for various optimization levels. This macro, if - defined, is executed once just after the optimization level is - determined and before the remainder of the command options have - been parsed. Values set in this macro are used as the default - values for the other command line options. - - LEVEL is the optimization level specified; 2 if -O2 is specified, - 1 if -O is specified, and 0 if neither is specified. - - *Do not examine `write_symbols' in this macro!* The debugging - options are not supposed to alter the generated code. + The compiler assumes that certain kinds of RTL expressions are +unique; there do not exist two distinct objects representing the same +value. In other cases, it makes an opposite assumption: that no RTL +expression object of a certain kind appears in more than one place in +the containing structure. + + These assumptions refer to a single function; except for the RTL +objects that describe global variables and external functions, and a +few standard objects such as small integer constants, no RTL objects +are common to two functions. + + * Each pseudo-register has only a single `reg' object to represent + it, and therefore only a single machine mode. + + * For any symbolic label, there is only one `symbol_ref' object + referring to it. + + * There is only one `const_int' expression with value 0, only one + with value 1, and only one with value -1. Some other integer + values are also stored uniquely. + + * There is only one `pc' expression. + + * There is only one `cc0' expression. + + * There is only one `const_double' expression with value 0 for each + floating point mode. Likewise for values 1 and 2. + + * No `label_ref' or `scratch' appears in more than one place in the + RTL structure; in other words, it is safe to do a tree-walk of all + the insns in the function and assume that each time a `label_ref' + or `scratch' is seen it is distinct from all others that are seen. + + * Only one `mem' object is normally created for each static variable + or stack slot, so these objects are frequently shared in all the + places they appear. However, separate but equal objects for these + variables are occasionally made. + + * When a single `asm' statement has multiple output operands, a + distinct `asm_operands' expression is made for each output operand. + However, these all share the vector which contains the sequence of + input operands. This sharing is used later on to test whether two + `asm_operands' expressions come from the same statement, so all + optimizations must carefully preserve the sharing if they copy the + vector at all. + + * No RTL object appears in more than one place in the RTL structure + except as described above. Many passes of the compiler rely on + this by assuming that they can modify RTL objects in place without + unwanted side-effects on other insns. + + * During initial RTL generation, shared structure is freely + introduced. After all the RTL for a function has been generated, + all shared structure is copied by `unshare_all_rtl' in + `emit-rtl.c', after which the above rules are guaranteed to be + followed. + + * During the combiner pass, shared structure within an insn can exist + temporarily. However, the shared structure is copied before the + combiner is finished with the insn. This is done by calling + `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'.  -File: gcc.info, Node: Storage Layout, Next: Type Layout, Prev: Run-time Target, Up: Target Macros +File: gcc.info, Node: Reading RTL, Prev: Sharing, Up: RTL -Storage Layout -============== +Reading RTL +=========== - Note that the definitions of the macros in this table which are -sizes or alignments measured in bits do not need to be constant. They -can be C expressions that refer to static variables, such as the -`target_flags'. *Note Run-time Target::. - -`BITS_BIG_ENDIAN' - Define this macro to be the value 1 if the most significant bit in - a byte has the lowest number; otherwise define it to be the value - zero. This means that bit-field instructions count from the most - significant bit. If the machine has no bit-field instructions, - this macro is irrelevant. - - This macro does not affect the way structure fields are packed into - bytes or words; that is controlled by `BYTES_BIG_ENDIAN'. - -`BYTES_BIG_ENDIAN' - Define this macro to be 1 if the most significant byte in a word - has the lowest number. - -`WORDS_BIG_ENDIAN' - Define this macro to be 1 if, in a multiword object, the most - significant word has the lowest number. - -`BITS_PER_UNIT' - Number of bits in an addressable storage unit (byte); normally 8. - -`BITS_PER_WORD' - Number of bits in a word; normally 32. - -`MAX_BITS_PER_WORD' - Maximum number of bits in a word. If this is undefined, the - default is `BITS_PER_WORD'. Otherwise, it is the constant value - that is the largest value that `BITS_PER_WORD' can have at - run-time. - -`UNITS_PER_WORD' - Number of storage units in a word; normally 4. - -`POINTER_SIZE' - Width of a pointer, in bits. - -`PARM_BOUNDARY' - Normal alignment required for function parameters on the stack, in - bits. All stack parameters receive least this much alignment - regardless of data type. On most machines, this is the same as the - size of an integer. - -`STACK_BOUNDARY' - Define this macro if you wish to preserve a certain alignment for - the stack pointer. The definition is a C expression for the - desired alignment (measured in bits). - - If `PUSH_ROUNDING' is not defined, the stack will always be aligned - to the specified boundary. If `PUSH_ROUNDING' is defined and - specifies a less strict alignment than `STACK_BOUNDARY', the stack - may be momentarily unaligned while pushing arguments. - -`FUNCTION_BOUNDARY' - Alignment required for a function entry point, in bits. - -`BIGGEST_ALIGNMENT' - Biggest alignment that any data type can require on this machine, - in bits. - -`BIGGEST_FIELD_ALIGNMENT' - Biggest alignment that any structure field can require on this - machine, in bits. If defined, this overrides `BIGGEST_ALIGNMENT' - for structure fields only. - -`MAX_OFILE_ALIGNMENT' - Biggest alignment supported by the object file format of this - machine. Use this macro to limit the alignment which can be - specified using the `__attribute__ ((aligned (N)))' construct. If - not defined, the default value is `BIGGEST_ALIGNMENT'. - -`DATA_ALIGNMENT (TYPE, BASIC-ALIGN)' - If defined, a C expression to compute the alignment for a static - variable. TYPE is the data type, and BASIC-ALIGN is the alignment - that the object would ordinarily have. The value of this macro is - used instead of that alignment to align the object. - - If this macro is not defined, then BASIC-ALIGN is used. - - One use of this macro is to increase alignment of medium-size data - to make it all fit in fewer cache lines. Another is to cause - character arrays to be word-aligned so that `strcpy' calls that - copy constants to character arrays can be done inline. - -`CONSTANT_ALIGNMENT (CONSTANT, BASIC-ALIGN)' - If defined, a C expression to compute the alignment given to a - constant that is being placed in memory. CONSTANT is the constant - and BASIC-ALIGN is the alignment that the object would ordinarily - have. The value of this macro is used instead of that alignment to - align the object. - - If this macro is not defined, then BASIC-ALIGN is used. - - The typical use of this macro is to increase alignment for string - constants to be word aligned so that `strcpy' calls that copy - constants can be done inline. - -`EMPTY_FIELD_BOUNDARY' - Alignment in bits to be given to a structure bit field that - follows an empty field such as `int : 0;'. - - Note that `PCC_BITFIELD_TYPE_MATTERS' also affects the alignment - that results from an empty field. - -`STRUCTURE_SIZE_BOUNDARY' - Number of bits which any structure or union's size must be a - multiple of. Each structure or union's size is rounded up to a - multiple of this. - - If you do not define this macro, the default is the same as - `BITS_PER_UNIT'. - -`STRICT_ALIGNMENT' - Define this macro to be the value 1 if instructions will fail to - work if given data not on the nominal alignment. If instructions - will merely go slower in that case, define this macro as 0. - -`PCC_BITFIELD_TYPE_MATTERS' - Define this if you wish to imitate the way many other C compilers - handle alignment of bitfields and the structures that contain them. - - The behavior is that the type written for a bitfield (`int', - `short', or other integer type) imposes an alignment for the - entire structure, as if the structure really did contain an - ordinary field of that type. In addition, the bitfield is placed - within the structure so that it would fit within such a field, not - crossing a boundary for it. - - Thus, on most machines, a bitfield whose type is written as `int' - would not cross a four-byte boundary, and would force four-byte - alignment for the whole structure. (The alignment used may not be - four bytes; it is controlled by the other alignment parameters.) - - If the macro is defined, its definition should be a C expression; - a nonzero value for the expression enables this behavior. - - Note that if this macro is not defined, or its value is zero, some - bitfields may cross more than one alignment boundary. The - compiler can support such references if there are `insv', `extv', - and `extzv' insns that can directly reference memory. - - The other known way of making bitfields work is to define - `STRUCTURE_SIZE_BOUNDARY' as large as `BIGGEST_ALIGNMENT'. Then - every structure can be accessed with fullwords. - - Unless the machine has bitfield instructions or you define - `STRUCTURE_SIZE_BOUNDARY' that way, you must define - `PCC_BITFIELD_TYPE_MATTERS' to have a nonzero value. - -`BITFIELD_NBYTES_LIMITED' - Like PCC_BITFIELD_TYPE_MATTERS except that its effect is limited to - aligning a bitfield within the structure. - -`ROUND_TYPE_SIZE (STRUCT, SIZE, ALIGN)' - Define this macro as an expression for the overall size of a - structure (given by STRUCT as a tree node) when the size computed - from the fields is SIZE and the alignment is ALIGN. - - The default is to round SIZE up to a multiple of ALIGN. - -`ROUND_TYPE_ALIGN (STRUCT, COMPUTED, SPECIFIED)' - Define this macro as an expression for the alignment of a structure - (given by STRUCT as a tree node) if the alignment computed in the - usual way is COMPUTED and the alignment explicitly specified was - SPECIFIED. - - The default is to use SPECIFIED if it is larger; otherwise, use - the smaller of COMPUTED and `BIGGEST_ALIGNMENT' - -`MAX_FIXED_MODE_SIZE' - An integer expression for the size in bits of the largest integer - machine mode that should actually be used. All integer machine - modes of this size or smaller can be used for structures and - unions with the appropriate sizes. If this macro is undefined, - `GET_MODE_BITSIZE (DImode)' is assumed. - -`CHECK_FLOAT_VALUE (MODE, VALUE)' - A C statement to validate the value VALUE (of type `double') for - mode MODE. This means that you check whether VALUE fits within - the possible range of values for mode MODE on this target machine. - The mode MODE is always `SFmode' or `DFmode'. - - If VALUE is not valid, you should call `error' to print an error - message and then assign some valid value to VALUE. Allowing an - invalid value to go through the compiler can produce incorrect - assembler code which may even cause Unix assemblers to crash. - - This macro need not be defined if there is no work for it to do. - -`TARGET_FLOAT_FORMAT' - A code distinguishing the floating point format of the target - machine. There are three defined values: - - `IEEE_FLOAT_FORMAT' - This code indicates IEEE floating point. It is the default; - there is no need to define this macro when the format is IEEE. - - `VAX_FLOAT_FORMAT' - This code indicates the peculiar format used on the Vax. - - `UNKNOWN_FLOAT_FORMAT' - This code indicates any other format. - - The value of this macro is compared with `HOST_FLOAT_FORMAT' - (*note Config::.) to determine whether the target machine has the - same format as the host machine. If any other formats are - actually in use on supported machines, new codes should be defined - for them. + To read an RTL object from a file, call `read_rtx'. It takes one +argument, a stdio stream, and returns a single RTL object. - -File: gcc.info, Node: Type Layout, Next: Registers, Prev: Storage Layout, Up: Target Macros + Reading RTL from a file is very slow. This is no currently not a +problem because reading RTL occurs only as part of building the +compiler. -Layout of Source Language Data Types -==================================== + People frequently have the idea of using RTL stored as text in a +file as an interface between a language front end and the bulk of GNU +CC. This idea is not feasible. - These macros define the sizes and other characteristics of the -standard basic data types used in programs being compiled. Unlike the -macros in the previous section, these apply to specific features of C -and related languages, rather than to fundamental aspects of storage -layout. - -`INT_TYPE_SIZE' - A C expression for the size in bits of the type `int' on the - target machine. If you don't define this, the default is one word. - -`SHORT_TYPE_SIZE' - A C expression for the size in bits of the type `short' on the - target machine. If you don't define this, the default is half a - word. (If this would be less than one storage unit, it is rounded - up to one unit.) - -`LONG_TYPE_SIZE' - A C expression for the size in bits of the type `long' on the - target machine. If you don't define this, the default is one word. - -`LONG_LONG_TYPE_SIZE' - A C expression for the size in bits of the type `long long' on the - target machine. If you don't define this, the default is two - words. - -`CHAR_TYPE_SIZE' - A C expression for the size in bits of the type `char' on the - target machine. If you don't define this, the default is one - quarter of a word. (If this would be less than one storage unit, - it is rounded up to one unit.) - -`FLOAT_TYPE_SIZE' - A C expression for the size in bits of the type `float' on the - target machine. If you don't define this, the default is one word. - -`DOUBLE_TYPE_SIZE' - A C expression for the size in bits of the type `double' on the - target machine. If you don't define this, the default is two - words. - -`LONG_DOUBLE_TYPE_SIZE' - A C expression for the size in bits of the type `long double' on - the target machine. If you don't define this, the default is two - words. - -`DEFAULT_SIGNED_CHAR' - An expression whose value is 1 or 0, according to whether the type - `char' should be signed or unsigned by default. The user can - always override this default with the options `-fsigned-char' and - `-funsigned-char'. - -`DEFAULT_SHORT_ENUMS' - A C expression to determine whether to give an `enum' type only as - many bytes as it takes to represent the range of possible values - of that type. A nonzero value means to do that; a zero value - means all `enum' types should be allocated like `int'. - - If you don't define the macro, the default is 0. - -`SIZE_TYPE' - A C expression for a string describing the name of the data type - to use for size values. The typedef name `size_t' is defined - using the contents of the string. - - The string can contain more than one keyword. If so, separate - them with spaces, and write first any length keyword, then - `unsigned' if appropriate, and finally `int'. The string must - exactly match one of the data type names defined in the function - `init_decl_processing' in the file `c-decl.c'. You may not omit - `int' or change the order--that would cause the compiler to crash - on startup. - - If you don't define this macro, the default is `"long unsigned - int"'. - -`PTRDIFF_TYPE' - A C expression for a string describing the name of the data type - to use for the result of subtracting two pointers. The typedef - name `ptrdiff_t' is defined using the contents of the string. See - `SIZE_TYPE' above for more information. - - If you don't define this macro, the default is `"long int"'. - -`WCHAR_TYPE' - A C expression for a string describing the name of the data type - to use for wide characters. The typedef name `wchar_t' is defined - using the contents of the string. See `SIZE_TYPE' above for more - information. - - If you don't define this macro, the default is `"int"'. - -`WCHAR_TYPE_SIZE' - A C expression for the size in bits of the data type for wide - characters. This is used in `cpp', which cannot make use of - `WCHAR_TYPE'. - -`OBJC_INT_SELECTORS' - Define this macro if the type of Objective C selectors should be - `int'. - - If this macro is not defined, then selectors should have the type - `struct objc_selector *'. - -`OBJC_SELECTORS_WITHOUT_LABELS' - Define this macro if the compiler can group all the selectors - together into a vector and use just one label at the beginning of - the vector. Otherwise, the compiler must give each selector its - own assembler label. - - On certain machines, it is important to have a separate label for - each selector because this enables the linker to eliminate - duplicate selectors. - -`TARGET_BELL' - A C constant expression for the integer value for escape sequence - `\a'. - -`TARGET_BS' -`TARGET_TAB' -`TARGET_NEWLINE' - C constant expressions for the integer values for escape sequences - `\b', `\t' and `\n'. - -`TARGET_VT' -`TARGET_FF' -`TARGET_CR' - C constant expressions for the integer values for escape sequences - `\v', `\f' and `\r'. + GNU CC was designed to use RTL internally only. Correct RTL for a +given program is very dependent on the particular target machine. And +the RTL does not contain all the information about the program. - -File: gcc.info, Node: Registers, Next: Register Classes, Prev: Type Layout, Up: Target Macros - -Register Usage -============== + The proper way to interface GNU CC to a new language front end is +with the "tree" data structure. There is no manual for this data +structure, but it is described in the files `tree.h' and `tree.def'. - This section explains how to describe what registers the target -machine has, and how (in general) they can be used. + +File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top - The description of which registers a specific instruction can use is -done with register classes; see *Note Register Classes::. For -information on using registers to access a stack frame, see *Note Frame -Registers::. For passing values in registers, see *Note Register -Arguments::. For returning values in registers, see *Note Scalar -Return::. +Machine Descriptions +******************** -* Menu: + A machine description has two parts: a file of instruction patterns +(`.md' file) and a C header file of macro definitions. -* Register Basics:: Number and kinds of registers. -* Allocation Order:: Order in which registers are allocated. -* Values in Registers:: What kinds of values each reg can hold. -* Leaf Functions:: Renumbering registers for leaf functions. -* Stack Registers:: Handling a register stack such as 80387. -* Obsolete Register Macros:: Macros formerly used for the 80387. + The `.md' file for a target machine contains a pattern for each +instruction that the target machine supports (or at least each +instruction that is worth telling the compiler about). It may also +contain comments. A semicolon causes the rest of the line to be a +comment, unless the semicolon is inside a quoted string. - -File: gcc.info, Node: Register Basics, Next: Allocation Order, Up: Registers + See the next chapter for information on the C header file. -Basic Characteristics of Registers ----------------------------------- +* Menu: -`FIRST_PSEUDO_REGISTER' - Number of hardware registers known to the compiler. They receive - numbers 0 through `FIRST_PSEUDO_REGISTER-1'; thus, the first - pseudo register's number really is assigned the number - `FIRST_PSEUDO_REGISTER'. - -`FIXED_REGISTERS' - An initializer that says which registers are used for fixed - purposes all throughout the compiled code and are therefore not - available for general allocation. These would include the stack - pointer, the frame pointer (except on machines where that can be - used as a general register when no frame pointer is needed), the - program counter on machines where that is considered one of the - addressable registers, and any other numbered register with a - standard use. - - This information is expressed as a sequence of numbers, separated - by commas and surrounded by braces. The Nth number is 1 if - register N is fixed, 0 otherwise. - - The table initialized from this macro, and the table initialized by - the following one, may be overridden at run time either - automatically, by the actions of the macro - `CONDITIONAL_REGISTER_USAGE', or by the user with the command - options `-ffixed-REG', `-fcall-used-REG' and `-fcall-saved-REG'. - -`CALL_USED_REGISTERS' - Like `FIXED_REGISTERS' but has 1 for each register that is - clobbered (in general) by function calls as well as for fixed - registers. This macro therefore identifies the registers that are - not available for general allocation of values that must live - across function calls. - - If a register has 0 in `CALL_USED_REGISTERS', the compiler - automatically saves it on function entry and restores it on - function exit, if the register is used within the function. - -`CONDITIONAL_REGISTER_USAGE' - Zero or more C statements that may conditionally modify two - variables `fixed_regs' and `call_used_regs' (both of type `char - []') after they have been initialized from the two preceding - macros. - - This is necessary in case the fixed or call-clobbered registers - depend on target flags. - - You need not define this macro if it has no work to do. - - If the usage of an entire class of registers depends on the target - flags, you may indicate this to GCC by using this macro to modify - `fixed_regs' and `call_used_regs' to 1 for each of the registers - in the classes which should not be used by GCC. Also define the - macro `REG_CLASS_FROM_LETTER' to return `NO_REGS' if it is called - with a letter for a class that shouldn't be used. - - (However, if this class is not included in `GENERAL_REGS' and all - of the insn patterns whose constraints permit this class are - controlled by target switches, then GCC will automatically avoid - using these registers when the target switches are opposed to - them.) - -`NON_SAVING_SETJMP' - If this macro is defined and has a nonzero value, it means that - `setjmp' and related functions fail to save the registers, or that - `longjmp' fails to restore them. To compensate, the compiler - avoids putting variables in registers in functions that use - `setjmp'. +* Patterns:: How to write instruction patterns. +* Example:: An explained example of a `define_insn' pattern. +* RTL Template:: The RTL template defines what insns match a pattern. +* Output Template:: The output template says how to make assembler code + from such an insn. +* Output Statement:: For more generality, write C code to output + the assembler code. +* Constraints:: When not all operands are general operands. +* Standard Names:: Names mark patterns to use for code generation. +* Pattern Ordering:: When the order of patterns makes a difference. +* Dependent Patterns:: Having one pattern may make you need another. +* Jump Patterns:: Special considerations for patterns for jump insns. +* Insn Canonicalizations::Canonicalization of Instructions +* Peephole Definitions::Defining machine-specific peephole optimizations. +* Expander Definitions::Generating a sequence of several RTL insns + for a standard operation. +* Insn Splitting:: Splitting Instructions into Multiple Instructions +* Insn Attributes:: Specifying the value of attributes for generated insns.  -File: gcc.info, Node: Allocation Order, Next: Values in Registers, Prev: Register Basics, Up: Registers +File: gcc.info, Node: Patterns, Next: Example, Up: Machine Desc -Order of Allocation of Registers --------------------------------- +Everything about Instruction Patterns +===================================== -`REG_ALLOC_ORDER' - If defined, an initializer for a vector of integers, containing the - numbers of hard registers in the order in which GNU CC should - prefer to use them (from most preferred to least). - - If this macro is not defined, registers are used lowest numbered - first (all else being equal). - - One use of this macro is on machines where the highest numbered - registers must always be saved and the save-multiple-registers - instruction supports only sequences of consecutive registers. On - such machines, define `REG_ALLOC_ORDER' to be an initializer that - lists the highest numbered allocatable register first. - -`ORDER_REGS_FOR_LOCAL_ALLOC' - A C statement (sans semicolon) to choose the order in which to - allocate hard registers for pseudo-registers local to a basic - block. - - Store the desired order of registers in the array - `reg_alloc_order'. Element 0 should be the register to allocate - first; element 1, the next register; and so on. + Each instruction pattern contains an incomplete RTL expression, with +pieces to be filled in later, operand constraints that restrict how the +pieces can be filled in, and an output pattern or C code to generate +the assembler output, all wrapped up in a `define_insn' expression. + + A `define_insn' is an RTL expression containing four or five +operands: + + 1. An optional name. The presence of a name indicate that this + instruction pattern can perform a certain standard job for the + RTL-generation pass of the compiler. This pass knows certain + names and will use the instruction patterns with those names, if + the names are defined in the machine description. + + The absence of a name is indicated by writing an empty string + where the name should go. Nameless instruction patterns are never + used for generating RTL code, but they may permit several simpler + insns to be combined later on. + + Names that are not thus known and used in RTL-generation have no + effect; they are equivalent to no name at all. + + 2. The "RTL template" (*note RTL Template::.) is a vector of + incomplete RTL expressions which show what the instruction should + look like. It is incomplete because it may contain + `match_operand', `match_operator', and `match_dup' expressions + that stand for operands of the instruction. + + If the vector has only one element, that element is the template + for the instruction pattern. If the vector has multiple elements, + then the instruction pattern is a `parallel' expression containing + the elements described. + + 3. A condition. This is a string which contains a C expression that + is the final test to decide whether an insn body matches this + pattern. + + For a named pattern, the condition (if present) may not depend on + the data in the insn being matched, but only the + target-machine-type flags. The compiler needs to test these + conditions during initialization in order to learn exactly which + named instructions are available in a particular run. + + For nameless patterns, the condition is applied only when matching + an individual insn, and only after the insn has matched the + pattern's recognition template. The insn's operands may be found + in the vector `operands'. + + 4. The "output template": a string that says how to output matching + insns as assembler code. `%' in this string specifies where to + substitute the value of an operand. *Note Output Template::. - The macro body should not assume anything about the contents of - `reg_alloc_order' before execution of the macro. + When simple substitution isn't general enough, you can specify a + piece of C code to compute the output. *Note Output Statement::. - On most machines, it is not necessary to define this macro. + 5. Optionally, a vector containing the values of attributes for insns + matching this pattern. *Note Insn Attributes::.  -File: gcc.info, Node: Values in Registers, Next: Leaf Functions, Prev: Allocation Order, Up: Registers +File: gcc.info, Node: Example, Next: RTL Template, Prev: Patterns, Up: Machine Desc -How Values Fit in Registers ---------------------------- +Example of `define_insn' +======================== - This section discusses the macros that describe which kinds of values -(specifically, which machine modes) each register can hold, and how many -consecutive registers are needed for a given mode. - -`HARD_REGNO_NREGS (REGNO, MODE)' - A C expression for the number of consecutive hard registers, - starting at register number REGNO, required to hold a value of mode - MODE. - - On a machine where all registers are exactly one word, a suitable - definition of this macro is - - #define HARD_REGNO_NREGS(REGNO, MODE) \ - ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \ - / UNITS_PER_WORD)) - -`HARD_REGNO_MODE_OK (REGNO, MODE)' - A C expression that is nonzero if it is permissible to store a - value of mode MODE in hard register number REGNO (or in several - registers starting with that one). For a machine where all - registers are equivalent, a suitable definition is - - #define HARD_REGNO_MODE_OK(REGNO, MODE) 1 - - It is not necessary for this macro to check for the numbers of - fixed registers, because the allocation mechanism considers them - to be always occupied. - - On some machines, double-precision values must be kept in even/odd - register pairs. The way to implement that is to define this macro - to reject odd register numbers for such modes. - - The minimum requirement for a mode to be OK in a register is that - the `movMODE' instruction pattern support moves between the - register and any other hard register for which the mode is OK; and - that moving a value into the register and back out not alter it. - - Since the same instruction used to move `SImode' will work for all - narrower integer modes, it is not necessary on any machine for - `HARD_REGNO_MODE_OK' to distinguish between these modes, provided - you define patterns `movhi', etc., to take advantage of this. This - is useful because of the interaction between `HARD_REGNO_MODE_OK' - and `MODES_TIEABLE_P'; it is very desirable for all integer modes - to be tieable. - - Many machines have special registers for floating point arithmetic. - Often people assume that floating point machine modes are allowed - only in floating point registers. This is not true. Any - registers that can hold integers can safely *hold* a floating - point machine mode, whether or not floating arithmetic can be done - on it in those registers. Integer move instructions can be used - to move the values. - - On some machines, though, the converse is true: fixed-point machine - modes may not go in floating registers. This is true if the - floating registers normalize any value stored in them, because - storing a non-floating value there would garble it. In this case, - `HARD_REGNO_MODE_OK' should reject fixed-point machine modes in - floating registers. But if the floating registers do not - automatically normalize, if you can store any bit pattern in one - and retrieve it unchanged without a trap, then any machine mode - may go in a floating register, so you can define this macro to say - so. - - On some machines, such as the Sparc and the Mips, we get better - code by defining `HARD_REGNO_MODE_OK' to forbid integers in - floating registers, even though the hardware is capable of - handling them. This is because transferring values between - floating registers and general registers is so slow that it is - better to keep the integer in memory. - - The primary significance of special floating registers is rather - that they are the registers acceptable in floating point arithmetic - instructions. However, this is of no concern to - `HARD_REGNO_MODE_OK'. You handle it by writing the proper - constraints for those instructions. - - On some machines, the floating registers are especially slow to - access, so that it is better to store a value in a stack frame - than in such a register if floating point arithmetic is not being - done. As long as the floating registers are not in class - `GENERAL_REGS', they will not be used unless some pattern's - constraint asks for one. - -`MODES_TIEABLE_P (MODE1, MODE2)' - A C expression that is nonzero if it is desirable to choose - register allocation so as to avoid move instructions between a - value of mode MODE1 and a value of mode MODE2. - - If `HARD_REGNO_MODE_OK (R, MODE1)' and `HARD_REGNO_MODE_OK (R, - MODE2)' are ever different for any R, then `MODES_TIEABLE_P (MODE1, - MODE2)' must be zero. + Here is an actual example of an instruction pattern, for the +68000/68020. - -File: gcc.info, Node: Leaf Functions, Next: Stack Registers, Prev: Values in Registers, Up: Registers + (define_insn "tstsi" + [(set (cc0) + (match_operand:SI 0 "general_operand" "rm"))] + "" + "* + { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) + return \"tstl %0\"; + return \"cmpl #0,%0\"; }") + + This is an instruction that sets the condition codes based on the +value of a general operand. It has no condition, so any insn whose RTL +description has the form shown may be handled according to this +pattern. The name `tstsi' means "test a `SImode' value" and tells the +RTL generation pass that, when it is necessary to test such a value, an +insn to do so can be constructed using this pattern. + + The output control string is a piece of C code which chooses which +output template to return based on the kind of operand and the specific +type of CPU for which code is being generated. -Handling Leaf Functions ------------------------ - - On some machines, a leaf function (i.e., one which make no calls) -can run more efficiently if it does not make its own register window. -Often this means it is required to receive its arguments in the -registers where they are passed by the caller, instead of the registers -where they would normally arrive. - - The special treatment for leaf functions generally applies only when -other conditions are met; for example, often they may use only those -registers for its own variables and temporaries. We use the term "leaf -function" to mean a function that is suitable for this special -handling, so that functions with no calls are not necessarily "leaf -functions". - - GNU CC assigns register numbers before it knows whether the function -is suitable for leaf function treatment. So it needs to renumber the -registers in order to output a leaf function. The following macros -accomplish this. - -`LEAF_REGISTERS' - A C initializer for a vector, indexed by hard register number, - which contains 1 for a register that is allowable in a candidate - for leaf function treatment. - - If leaf function treatment involves renumbering the registers, - then the registers marked here should be the ones before - renumbering--those that GNU CC would ordinarily allocate. The - registers which will actually be used in the assembler code, after - renumbering, should not be marked with 1 in this vector. - - Define this macro only if the target machine offers a way to - optimize the treatment of leaf functions. - -`LEAF_REG_REMAP (REGNO)' - A C expression whose value is the register number to which REGNO - should be renumbered, when a function is treated as a leaf - function. - - If REGNO is a register number which should not appear in a leaf - function before renumbering, then the expression should yield -1, - which will cause the compiler to abort. - - Define this macro only if the target machine offers a way to - optimize the treatment of leaf functions, and registers need to be - renumbered to do this. - -`REG_LEAF_ALLOC_ORDER' - If defined, an initializer for a vector of integers, containing the - numbers of hard registers in the order in which the GNU CC should - prefer to use them (from most preferred to least) in a leaf - function. If this macro is not defined, REG_ALLOC_ORDER is used - for both non-leaf and leaf-functions. - - Normally, it is necessary for `FUNCTION_PROLOGUE' and -`FUNCTION_EPILOGUE' to treat leaf functions specially. It can test the -C variable `leaf_function' which is nonzero for leaf functions. (The -variable `leaf_function' is defined only if `LEAF_REGISTERS' is -defined.) + `"rm"' is an operand constraint. Its meaning is explained below.  -File: gcc.info, Node: Stack Registers, Next: Obsolete Register Macros, Prev: Leaf Functions, Up: Registers - -Registers That Form a Stack ---------------------------- +File: gcc.info, Node: RTL Template, Next: Output Template, Prev: Example, Up: Machine Desc - There are special features to handle computers where some of the -"registers" form a stack, as in the 80387 coprocessor for the 80386. -Stack registers are normally written by pushing onto the stack, and are -numbered relative to the top of the stack. +RTL Template +============ - Currently, GNU CC can only handle one group of stack-like registers, -and they must be consecutively numbered. - -`STACK_REGS' - Define this if the machine has any stack-like registers. + The RTL template is used to define which insns match the particular +pattern and how to find their operands. For named patterns, the RTL +template also says how to construct an insn from specified operands. + + Construction involves substituting specified operands into a copy of +the template. Matching involves determining the values that serve as +the operands in the insn being matched. Both of these activities are +controlled by special expression types that direct matching and +substitution of the operands. + +`(match_operand:M N PREDICATE CONSTRAINT)' + This expression is a placeholder for operand number N of the insn. + When constructing an insn, operand number N will be substituted + at this point. When matching an insn, whatever appears at this + position in the insn will be taken as operand number N; but it + must satisfy PREDICATE or this instruction pattern will not match + at all. + + Operand numbers must be chosen consecutively counting from zero in + each instruction pattern. There may be only one `match_operand' + expression in the pattern for each operand number. Usually + operands are numbered in the order of appearance in `match_operand' + expressions. + + PREDICATE is a string that is the name of a C function that + accepts two arguments, an expression and a machine mode. During + matching, the function will be called with the putative operand as + the expression and M as the mode argument (if M is not specified, + `VOIDmode' will be used, which normally causes PREDICATE to accept + any mode). If it returns zero, this instruction pattern fails to + match. PREDICATE may be an empty string; then it means no test is + to be done on the operand, so anything which occurs in this + position is valid. + + Most of the time, PREDICATE will reject modes other than M--but + not always. For example, the predicate `address_operand' uses M + as the mode of memory ref that the address should be valid for. + Many predicates accept `const_int' nodes even though their mode is + `VOIDmode'. + + CONSTRAINT controls reloading and the choice of the best register + class to use for a value, as explained later (*note + Constraints::.). + + People are often unclear on the difference between the constraint + and the predicate. The predicate helps decide whether a given + insn matches the pattern. The constraint plays no role in this + decision; instead, it controls various decisions in the case of an + insn which does match. + + On CISC machines, the most common PREDICATE is + `"general_operand"'. This function checks that the putative + operand is either a constant, a register or a memory reference, + and that it is valid for mode M. + + For an operand that must be a register, PREDICATE should be + `"register_operand"'. Using `"general_operand"' would be valid, + since the reload pass would copy any non-register operands through + registers, but this would make GNU CC do extra work, it would + prevent invariant operands (such as constant) from being removed + from loops, and it would prevent the register allocator from doing + the best possible job. On RISC machines, it is usually most + efficient to allow PREDICATE to accept only objects that the + constraints allow. + + For an operand that must be a constant, you must be sure to either + use `"immediate_operand"' for PREDICATE, or make the instruction + pattern's extra condition require a constant, or both. You cannot + expect the constraints to do this work! If the constraints allow + only constants, but the predicate allows something else, the + compiler will crash when that case arises. + +`(match_scratch:M N CONSTRAINT)' + This expression is also a placeholder for operand number N and + indicates that operand must be a `scratch' or `reg' expression. + + When matching patterns, this is completely equivalent to + + (match_operand:M N "scratch_operand" PRED) + + but, when generating RTL, it produces a (`scratch':M) expression. + + If the last few expressions in a `parallel' are `clobber' + expressions whose operands are either a hard register or + `match_scratch', the combiner can add them when necessary. *Note + Side Effects::. + +`(match_dup N)' + This expression is also a placeholder for operand number N. It is + used when the operand needs to appear more than once in the insn. + + In construction, `match_dup' acts just like `match_operand': the + operand is substituted into the insn being constructed. But in + matching, `match_dup' behaves differently. It assumes that operand + number N has already been determined by a `match_operand' + appearing earlier in the recognition template, and it matches only + an identical-looking expression. + +`(match_operator:M N PREDICATE [OPERANDS...])' + This pattern is a kind of placeholder for a variable RTL expression + code. + + When constructing an insn, it stands for an RTL expression whose + expression code is taken from that of operand N, and whose + operands are constructed from the patterns OPERANDS. + + When matching an expression, it matches an expression if the + function PREDICATE returns nonzero on that expression *and* the + patterns OPERANDS match the operands of the expression. + + Suppose that the function `commutative_operator' is defined as + follows, to match any expression whose operator is one of the + commutative arithmetic operators of RTL and whose mode is MODE: + + int + commutative_operator (x, mode) + rtx x; + enum machine_mode mode; + { + enum rtx_code code = GET_CODE (x); + if (GET_MODE (x) != mode) + return 0; + return (GET_RTX_CLASS (code) == 'c' + || code == EQ || code == NE); + } -`FIRST_STACK_REG' - The number of the first stack-like register. This one is the top - of the stack. + Then the following pattern will match any RTL expression consisting + of a commutative operator applied to two general operands: -`LAST_STACK_REG' - The number of the last stack-like register. This one is the - bottom of the stack. + (match_operator:SI 3 "commutative_operator" + [(match_operand:SI 1 "general_operand" "g") + (match_operand:SI 2 "general_operand" "g")]) + + Here the vector `[OPERANDS...]' contains two patterns because the + expressions to be matched all contain two operands. + + When this pattern does match, the two operands of the commutative + operator are recorded as operands 1 and 2 of the insn. (This is + done by the two instances of `match_operand'.) Operand 3 of the + insn will be the entire commutative expression: use `GET_CODE + (operands[3])' to see which commutative operator was used. + + The machine mode M of `match_operator' works like that of + `match_operand': it is passed as the second argument to the + predicate function, and that function is solely responsible for + deciding whether the expression to be matched "has" that mode. + + When constructing an insn, argument 3 of the gen-function will + specify the operation (i.e. the expression code) for the + expression to be made. It should be an RTL expression, whose + expression code is copied into a new expression whose operands are + arguments 1 and 2 of the gen-function. The subexpressions of + argument 3 are not used; only its expression code matters. + + When `match_operator' is used in a pattern for matching an insn, + it usually best if the operand number of the `match_operator' is + higher than that of the actual operands of the insn. This improves + register allocation because the register allocator often looks at + operands 1 and 2 of insns to see if it can do register tying. + + There is no way to specify constraints in `match_operator'. The + operand of the insn which corresponds to the `match_operator' + never has any constraints because it is never reloaded as a whole. + However, if parts of its OPERANDS are matched by `match_operand' + patterns, those parts may have constraints of their own. + +`(match_op_dup:M N[OPERANDS...])' + Like `match_dup', except that it applies to operators instead of + operands. When constructing an insn, operand number N will be + substituted at this point. But in matching, `match_op_dup' behaves + differently. It assumes that operand number N has already been + determined by a `match_operator' appearing earlier in the + recognition template, and it matches only an identical-looking + expression. + +`(match_parallel N PREDICATE [SUBPAT...])' + This pattern is a placeholder for an insn that consists of a + `parallel' expression with a variable number of elements. This + expression should only appear at the top level of an insn pattern. + + When constructing an insn, operand number N will be substituted at + this point. When matching an insn, it matches if the body of the + insn is a `parallel' expression with at least as many elements as + the vector of SUBPAT expressions in the `match_parallel', if each + SUBPAT matches the corresponding element of the `parallel', *and* + the function PREDICATE returns nonzero on the `parallel' that is + the body of the insn. It is the responsibility of the predicate + to validate elements of the `parallel' beyond those listed in the + `match_parallel'. + + A typical use of `match_parallel' is to match load and store + multiple expressions, which can contains a variable number of + elements in a `parallel'. For example, + + (define_insn "" + [(match_parallel 0 "load_multiple_operation" + [(set (match_operand:SI 1 "gpc_reg_operand" "=r") + (match_operand:SI 2 "memory_operand" "m")) + (use (reg:SI 179)) + (clobber (reg:SI 179))])] + "" + "loadm 0,0,%1,%2") + + This example comes from `a29k.md'. The function + `load_multiple_operations' is defined in `a29k.c' and checks that + subsequent elements in the `parallel' are the same as the `set' in + the pattern, except that they are referencing subsequent registers + and memory locations. + + An insn that matches this pattern might look like: + + (parallel + [(set (reg:SI 20) (mem:SI (reg:SI 100))) + (use (reg:SI 179)) + (clobber (reg:SI 179)) + (set (reg:SI 21) + (mem:SI (plus:SI (reg:SI 100) + (const_int 4)))) + (set (reg:SI 22) + (mem:SI (plus:SI (reg:SI 100) + (const_int 8))))]) + +`(match_par_dup N [SUBPAT...])' + Like `match_op_dup', but for `match_parallel' instead of + `match_operator'. + +`(address (match_operand:M N "address_operand" ""))' + This complex of expressions is a placeholder for an operand number + N in a "load address" instruction: an operand which specifies a + memory location in the usual way, but for which the actual operand + value used is the address of the location, not the contents of the + location. + + `address' expressions never appear in RTL code, only in machine + descriptions. And they are used only in machine descriptions that + do not use the operand constraint feature. When operand + constraints are in use, the letter `p' in the constraint serves + this purpose. + + M is the machine mode of the *memory location being addressed*, + not the machine mode of the address itself. That mode is always + the same on a given target machine (it is `Pmode', which normally + is `SImode'), so there is no point in mentioning it; thus, no + machine mode is written in the `address' expression. If some day + support is added for machines in which addresses of different + kinds of objects appear differently or are used differently (such + as the PDP-10), different formats would perhaps need different + machine modes and these modes might be written in the `address' + expression.  -File: gcc.info, Node: Obsolete Register Macros, Prev: Stack Registers, Up: Registers +File: gcc.info, Node: Output Template, Next: Output Statement, Prev: RTL Template, Up: Machine Desc -Obsolete Macros for Controlling Register Usage ----------------------------------------------- - - These features do not work very well. They exist because they used -to be required to generate correct code for the 80387 coprocessor of the -80386. They are no longer used by that machine description and may be -removed in a later version of the compiler. Don't use them! - -`OVERLAPPING_REGNO_P (REGNO)' - If defined, this is a C expression whose value is nonzero if hard - register number REGNO is an overlapping register. This means a - hard register which overlaps a hard register with a different - number. (Such overlap is undesirable, but occasionally it allows a - machine to be supported which otherwise could not be.) This macro - must return nonzero for *all* the registers which overlap each - other. GNU CC can use an overlapping register only in certain - limited ways. It can be used for allocation within a basic block, - and may be spilled for reloading; that is all. - - If this macro is not defined, it means that none of the hard - registers overlap each other. This is the usual situation. - -`INSN_CLOBBERS_REGNO_P (INSN, REGNO)' - If defined, this is a C expression whose value should be nonzero if - the insn INSN has the effect of mysteriously clobbering the - contents of hard register number REGNO. By "mysterious" we mean - that the insn's RTL expression doesn't describe such an effect. - - If this macro is not defined, it means that no insn clobbers - registers mysteriously. This is the usual situation; all else - being equal, it is best for the RTL expression to show all the - activity. - -`PRESERVE_DEATH_INFO_REGNO_P (REGNO)' - If defined, this is a C expression whose value is nonzero if - accurate `REG_DEAD' notes are needed for hard register number REGNO - at the time of outputting the assembler code. When this is so, a - few optimizations that take place after register allocation and - could invalidate the death notes are not done when this register is - involved. - - You would arrange to preserve death info for a register when some - of the code in the machine description which is executed to write - the assembler code looks at the death notes. This is necessary - only when the actual hardware feature which GNU CC thinks of as a - register is not actually a register of the usual sort. (It might, - for example, be a hardware stack.) +Output Templates and Operand Substitution +========================================= - If this macro is not defined, it means that no death notes need to - be preserved. This is the usual situation. + The "output template" is a string which specifies how to output the +assembler code for an instruction pattern. Most of the template is a +fixed string which is output literally. The character `%' is used to +specify where to substitute an operand; it can also be used to identify +places where different variants of the assembler require different +syntax. + + In the simplest case, a `%' followed by a digit N says to output +operand N at that point in the string. + + `%' followed by a letter and a digit says to output an operand in an +alternate fashion. Four letters have standard, built-in meanings +described below. The machine description macro `PRINT_OPERAND' can +define additional letters with nonstandard meanings. + + `%cDIGIT' can be used to substitute an operand that is a constant +value without the syntax that normally indicates an immediate operand. + + `%nDIGIT' is like `%cDIGIT' except that the value of the constant is +negated before printing. + + `%aDIGIT' can be used to substitute an operand as if it were a +memory reference, with the actual operand treated as the address. This +may be useful when outputting a "load address" instruction, because +often the assembler syntax for such an instruction requires you to +write the operand as if it were a memory reference. + + `%lDIGIT' is used to substitute a `label_ref' into a jump +instruction. + + `%=' outputs a number which is unique to each instruction in the +entire compilation. This is useful for making local labels to be +referred to more than once in a single template that generates multiple +assembler instructions. + + `%' followed by a punctuation character specifies a substitution that +does not use an operand. Only one case is standard: `%%' outputs a `%' +into the assembler code. Other nonstandard cases can be defined in the +`PRINT_OPERAND' macro. You must also define which punctuation +characters are valid with the `PRINT_OPERAND_PUNCT_VALID_P' macro. + + The template may generate multiple assembler instructions. Write +the text for the instructions, with `\;' between them. + + When the RTL contains two operands which are required by constraint +to match each other, the output template must refer only to the +lower-numbered operand. Matching operands are not always identical, +and the rest of the compiler arranges to put the proper RTL expression +for printing into the lower-numbered operand. + + One use of nonstandard letters or punctuation following `%' is to +distinguish between different assembler languages for the same machine; +for example, Motorola syntax versus MIT syntax for the 68000. Motorola +syntax requires periods in most opcode names, while MIT syntax does +not. For example, the opcode `movel' in MIT syntax is `move.l' in +Motorola syntax. The same file of patterns is used for both kinds of +output syntax, but the character sequence `%.' is used in each place +where Motorola syntax wants a period. The `PRINT_OPERAND' macro for +Motorola syntax defines the sequence to output a period; the macro for +MIT syntax defines it to do nothing. + + As a special case, a template consisting of the single character `#' +instructs the compiler to first split the insn, and then output the +resulting instructions separately. This helps eliminate redundancy in +the output templates. If you have a `define_insn' that needs to emit +multiple assembler instructions, and there is an matching `define_split' +already defined, then you can simply use `#' as the output template +instead of writing an output template that emits the multiple assembler +instructions. + + If `ASSEMBLER_DIALECT' is defined, you can use +`{option0|option1|option2}' constructs in the templates. These +describe multiple variants of assembler language syntax. *Note +Instruction Output::. - \ No newline at end of file