--- gcc/gcc.info-13 2018/04/24 17:56:06 1.1.1.3 +++ gcc/gcc.info-13 2018/04/24 18:41:50 1.1.1.9 @@ -1,9 +1,13 @@ -This is Info file gcc.info, produced by Makeinfo-1.47 from the input -file gcc.texi. +This is Info file gcc.info, produced by Makeinfo version 1.67 from the +input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 59 Temple Place - Suite 330 +Boston, MA 02111-1307 USA + + Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995 Free Software +Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -11,1107 +15,1043 @@ preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the sections entitled "GNU General Public License" and "Boycott" -are included exactly as in the original, and provided that the entire +that the sections entitled "GNU General Public License," "Funding for +Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are +included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public -License" and "Boycott", and this permission notice, may be included in +License," "Funding for Free Software," and "Protect Your Freedom--Fight +`Look And Feel'", and this permission notice, may be included in translations approved by the Free Software Foundation instead of in the original English.  -File: gcc.info, Node: Driver, Next: Run-time Target, Up: Target Macros - -Controlling the Compilation Driver, `gcc' -========================================= - -`SWITCH_TAKES_ARG (CHAR)' - A C expression which determines whether the option `-CHAR' takes - arguments. The value should be the number of arguments that - option takes--zero, for many options. - - By default, this macro is defined to handle the standard options - properly. You need not define it unless you wish to add additional - options which take arguments. - -`WORD_SWITCH_TAKES_ARG (NAME)' - A C expression which determines whether the option `-NAME' takes - arguments. The value should be the number of arguments that - option takes--zero, for many options. This macro rather than - `SWITCH_TAKES_ARG' is used for multi-character option names. - - By default, this macro is defined to handle the standard options - properly. You need not define it unless you wish to add additional - options which take arguments. - -`SWITCHES_NEED_SPACES' - A string-valued C expression which is nonempty if the linker needs - a space between the `-L' or `-o' option and its argument. - - If this macro is not defined, the default value is 0. - -`CPP_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to CPP. It can also specify how to translate options you - give to GNU CC into options for GNU CC to pass to the CPP. - - Do not define this macro if it does not need to do anything. - -`SIGNED_CHAR_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to CPP. By default, this macro is defined to pass the option - `-D__CHAR_UNSIGNED__' to CPP if `char' will be treated as - `unsigned char' by `cc1'. - - Do not define this macro unless you need to override the default - definition. - -`CC1_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to `cc1'. It can also specify how to translate options you - give to GNU CC into options for GNU CC to pass to the `cc1'. - - Do not define this macro if it does not need to do anything. - -`CC1PLUS_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to `cc1plus'. It can also specify how to translate options - you give to GNU CC into options for GNU CC to pass to the - `cc1plus'. - - Do not define this macro if it does not need to do anything. - -`ASM_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to the assembler. It can also specify how to translate - options you give to GNU CC into options for GNU CC to pass to the - assembler. See the file `sun3.h' for an example of this. - - Do not define this macro if it does not need to do anything. - -`ASM_FINAL_SPEC' - A C string constant that tells the GNU CC driver program how to - run any programs which cleanup after the normal assembler. - Normally, this is not needed. See the file `mips.h' for an - example of this. - - Do not define this macro if it does not need to do anything. - -`LINK_SPEC' - A C string constant that tells the GNU CC driver program options to - pass to the linker. It can also specify how to translate options - you give to GNU CC into options for GNU CC to pass to the linker. - - Do not define this macro if it does not need to do anything. - -`LIB_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `LIB_SPEC' is used at the end - of the command given to the linker. - - If this macro is not defined, a default is provided that loads the - standard C library from the usual place. See `gcc.c'. - -`STARTFILE_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `STARTFILE_SPEC' is used at the - very beginning of the command given to the linker. - - If this macro is not defined, a default is provided that loads the - standard C startup file from the usual place. See `gcc.c'. - -`ENDFILE_SPEC' - Another C string constant used much like `LINK_SPEC'. The - difference between the two is that `ENDFILE_SPEC' is used at the - very end of the command given to the linker. - - Do not define this macro if it does not need to do anything. - -`LINK_LIBGCC_SPECIAL' - Define this macro meaning that `gcc' should find the library - `libgcc.a' by hand, rather than passing the argument `-lgcc' to - tell the linker to do the search. - -`RELATIVE_PREFIX_NOT_LINKDIR' - Define this macro to tell `gcc' that it should only translate a - `-B' prefix into a `-L' linker option if the prefix indicates an - absolute file name. - -`STANDARD_EXEC_PREFIX' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/lib/gcc-lib/' as the default - prefix to try when searching for the executable files of the - compiler. - -`MD_EXEC_PREFIX' - If defined, this macro is an additional prefix to try after - `STANDARD_EXEC_PREFIX'. `MD_EXEC_PREFIX' is not searched when the - `-b' option is used, or the compiler is built as a cross compiler. - -`STANDARD_STARTFILE_PREFIX' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/lib/' as the default prefix to - try when searching for startup files such as `crt0.o'. - -`MD_STARTFILE_PREFIX' - If defined, this macro supplies an additional prefix to try after - the standard prefixes. `MD_EXEC_PREFIX' is not searched when the - `-b' option is used, or when the compiler is built as a cross - compiler. - -`MD_STARTFILE_PREFIX_1' - If defined, this macro supplies yet another prefix to try after the - standard prefixes. It is not searched when the `-b' option is - used, or when the compiler is built as a cross compiler. - -`LOCAL_INCLUDE_DIR' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/local/include' as the default prefix - to try when searching for local header files. `LOCAL_INCLUDE_DIR' - comes before `SYSTEM_INCLUDE_DIR' in the search order. - - Cross compilers do not use this macro and do not search either - `/usr/local/include' or its replacement. - -`SYSTEM_INCLUDE_DIR' - Define this macro as a C string constant if you wish to specify a - system-specific directory to search for header files before the - standard directory. `SYSTEM_INCLUDE_DIR' comes before - `STANDARD_INCLUDE_DIR' in the search order. - - Cross compilers do not use this macro and do not search the - directory specified. - -`STANDARD_INCLUDE_DIR' - Define this macro as a C string constant if you wish to override - the standard choice of `/usr/include' as the default prefix to try - when searching for header files. +File: gcc.info, Node: VMS Misc, Prev: Global Declarations, Up: VMS - Cross compilers do not use this macro and do not search either - `/usr/include' or its replacement. +Other VMS Issues +================ -`INCLUDE_DEFAULTS' - Define this macro if you wish to override the entire default - search path for include files. The default search path includes - `GPLUSPLUS_INCLUDE_DIR', `GCC_INCLUDE_DIR', `LOCAL_INCLUDE_DIR', - `SYSTEM_INCLUDE_DIR', and `STANDARD_INCLUDE_DIR'. In addition, - the macros `GPLUSPLUS_INCLUDE_DIR' and `GCC_INCLUDE_DIR' are - defined automatically by `Makefile', and specify private search - areas for GCC. The directory `GPLUSPLUS_INCLUDE_DIR' is used only - for C++ programs. + GNU CC automatically arranges for `main' to return 1 by default if +you fail to specify an explicit return value. This will be interpreted +by VMS as a status code indicating a normal successful completion. +Version 1 of GNU CC did not provide this default. + + GNU CC on VMS works only with the GNU assembler, GAS. You need +version 1.37 or later of GAS in order to produce value debugging +information for the VMS debugger. Use the ordinary VMS linker with the +object files produced by GAS. + + Under previous versions of GNU CC, the generated code would +occasionally give strange results when linked to the sharable `VAXCRTL' +library. Now this should work. + + A caveat for use of `const' global variables: the `const' modifier +must be specified in every external declaration of the variable in all +of the source files that use that variable. Otherwise the linker will +issue warnings about conflicting attributes for the variable. Your +program will still work despite the warnings, but the variable will be +placed in writable storage. + + Although the VMS linker does distinguish between upper and lower case +letters in global symbols, most VMS compilers convert all such symbols +into upper case and most run-time library routines also have upper case +names. To be able to reliably call such routines, GNU CC (by means of +the assembler GAS) converts global symbols into upper case like other +VMS compilers. However, since the usual practice in C is to distinguish +case, GNU CC (via GAS) tries to preserve usual C behavior by augmenting +each name that is not all lower case. This means truncating the name +to at most 23 characters and then adding more characters at the end +which encode the case pattern of those 23. Names which contain at +least one dollar sign are an exception; they are converted directly into +upper case without augmentation. + + Name augmentation yields bad results for programs that use +precompiled libraries (such as Xlib) which were generated by another +compiler. You can use the compiler option `/NOCASE_HACK' to inhibit +augmentation; it makes external C functions and variables +case-independent as is usual on VMS. Alternatively, you could write +all references to the functions and variables in such libraries using +lower case; this will work on VMS, but is not portable to other +systems. The compiler option `/NAMES' also provides control over +global name handling. + + Function and variable names are handled somewhat differently with GNU +C++. The GNU C++ compiler performs "name mangling" on function names, +which means that it adds information to the function name to describe +the data types of the arguments that the function takes. One result of +this is that the name of a function can become very long. Since the +VMS linker only recognizes the first 31 characters in a name, special +action is taken to ensure that each function and variable has a unique +name that can be represented in 31 characters. + + If the name (plus a name augmentation, if required) is less than 32 +characters in length, then no special action is performed. If the name +is longer than 31 characters, the assembler (GAS) will generate a hash +string based upon the function name, truncate the function name to 23 +characters, and append the hash string to the truncated name. If the +`/VERBOSE' compiler option is used, the assembler will print both the +full and truncated names of each symbol that is truncated. + + The `/NOCASE_HACK' compiler option should not be used when you are +compiling programs that use libg++. libg++ has several instances of +objects (i.e. `Filebuf' and `filebuf') which become indistinguishable +in a case-insensitive environment. This leads to cases where you need +to inhibit augmentation selectively (if you were using libg++ and Xlib +in the same program, for example). There is no special feature for +doing this, but you can get the result by defining a macro for each +mixed case symbol for which you wish to inhibit augmentation. The +macro should expand into the lower case equivalent of itself. For +example: - The definition should be an initializer for an array of structures. - Each array element should have two elements: the directory name (a - string constant) and a flag for C++-only directories. Mark the - end of the array with a null element. For example, here is the - definition used for VMS: + #define StuDlyCapS studlycaps - #define INCLUDE_DEFAULTS \ - { \ - { "GNU_GXX_INCLUDE:", 1}, \ - { "GNU_CC_INCLUDE:", 0}, \ - { "SYS$SYSROOT:[SYSLIB.]", 0}, \ - { ".", 0}, \ - { 0, 0} \ - } - - Here is the order of prefixes tried for exec files: - - 1. Any prefixes specified by the user with `-B'. - - 2. The environment variable `GCC_EXEC_PREFIX', if any. - - 3. The directories specified by the environment variable - `COMPILER_PATH'. - - 4. The macro `STANDARD_EXEC_PREFIX'. - - 5. `/usr/lib/gcc/'. - - 6. The macro `MD_EXEC_PREFIX', if any. - - Here is the order of prefixes tried for startfiles: - - 1. Any prefixes specified by the user with `-B'. - - 2. The environment variable `GCC_EXEC_PREFIX', if any. - - 3. The directories specified by the environment variable - `LIBRARY_PATH'. - - 4. The macro `STANDARD_EXEC_PREFIX'. - - 5. `/usr/lib/gcc/'. - - 6. The macro `MD_EXEC_PREFIX', if any. - - 7. The macro `MD_STARTFILE_PREFIX', if any. - - 8. The macro `STANDARD_STARTFILE_PREFIX'. - - 9. `/lib/'. - - 10. `/usr/lib/'. + These macro definitions can be placed in a header file to minimize +the number of changes to your source code.  -File: gcc.info, Node: Run-time Target, Next: Storage Layout, Prev: Driver, Up: Target Macros - -Run-time Target Specification -============================= - -`CPP_PREDEFINES' - Define this to be a string constant containing `-D' options to - define the predefined macros that identify this machine and system. - These macros will be predefined unless the `-ansi' option is - specified. - - In addition, a parallel set of macros are predefined, whose names - are made by appending `__' at the beginning and at the end. These - `__' macros are permitted by the ANSI standard, so they are - predefined regardless of whether `-ansi' is specified. - - For example, on the Sun, one can use the following value: - - "-Dmc68000 -Dsun -Dunix" - - The result is to define the macros `__mc68000__', `__sun__' and - `__unix__' unconditionally, and the macros `mc68000', `sun' and - `unix' provided `-ansi' is not specified. - -`STDC_VALUE' - Define the value to be assigned to the built-in macro `__STDC__'. - The default is the value `1'. - -`extern int target_flags;' - This declaration should be present. - -`TARGET_...' - This series of macros is to allow compiler command arguments to - enable or disable the use of optional features of the target - machine. For example, one machine description serves both the - 68000 and the 68020; a command argument tells the compiler whether - it should use 68020-only instructions or not. This command - argument works by means of a macro `TARGET_68020' that tests a bit - in `target_flags'. - - Define a macro `TARGET_FEATURENAME' for each such option. Its - definition should test a bit in `target_flags'; for example: - - #define TARGET_68020 (target_flags & 1) - - One place where these macros are used is in the - condition-expressions of instruction patterns. Note how - `TARGET_68020' appears frequently in the 68000 machine description - file, `m68k.md'. Another place they are used is in the definitions - of the other macros in the `MACHINE.h' file. - -`TARGET_SWITCHES' - This macro defines names of command options to set and clear bits - in `target_flags'. Its definition is an initializer with a - subgrouping for each command option. - - Each subgrouping contains a string constant, that defines the - option name, and a number, which contains the bits to set in - `target_flags'. A negative number says to clear bits instead; the - negative of the number is which bits to clear. The actual option - name is made by appending `-m' to the specified name. - - One of the subgroupings should have a null string. The number in - this grouping is the default value for `target_flags'. Any target - options act starting with that value. - - Here is an example which defines `-m68000' and `-m68020' with - opposite meanings, and picks the latter as the default: - - #define TARGET_SWITCHES \ - { { "68020", 1}, \ - { "68000", -1}, \ - { "", 1}} - -`TARGET_OPTIONS' - This macro is similar to `TARGET_SWITCHES' but defines names of - command options that have values. Its definition is an - initializer with a subgrouping for each command option. - - Each subgrouping contains a string constant, that defines the - fixed part of the option name, and the address of a variable. The - variable, type `char *', is set to the variable part of the given - option if the fixed part matches. The actual option name is made - by appending `-m' to the specified name. - - Here is an example which defines `-mshort-data-NUMBER'. If the - given option is `-mshort-data-512', the variable `m88k_short_data' - will be set to the string `"512"'. - - extern char *m88k_short_data; - #define TARGET_OPTIONS { { "short-data-", &m88k_short_data } } - -`TARGET_VERSION' - This macro is a C statement to print on `stderr' a string - describing the particular machine description choice. Every - machine description should define `TARGET_VERSION'. For example: - - #ifdef MOTOROLA - #define TARGET_VERSION fprintf (stderr, " (68k, Motorola syntax)"); - #else - #define TARGET_VERSION fprintf (stderr, " (68k, MIT syntax)"); - #endif - -`OVERRIDE_OPTIONS' - Sometimes certain combinations of command options do not make - sense on a particular target machine. You can define a macro - `OVERRIDE_OPTIONS' to take account of this. This macro, if - defined, is executed once just after all the command options have - been parsed. - - Don't use this macro to turn on various extra optimizations for - `-O'. That is what `OPTIMIZATION_OPTIONS' is for. - -`OPTIMIZATION_OPTIONS (LEVEL)' - Some machines may desire to change what optimizations are - performed for various optimization levels. This macro, if - defined, is executed once just after the optimization level is - determined and before the remainder of the command options have - been parsed. Values set in this macro are used as the default - values for the other command line options. +File: gcc.info, Node: Portability, Next: Interface, Prev: VMS, Up: Top - LEVEL is the optimization level specified; 2 if -O2 is specified, - 1 if -O is specified, and 0 if neither is specified. +GNU CC and Portability +********************** - *Do not examine `write_symbols' in this macro!* The debugging - options are not supposed to alter the generated code. + The main goal of GNU CC was to make a good, fast compiler for +machines in the class that the GNU system aims to run on: 32-bit +machines that address 8-bit bytes and have several general registers. +Elegance, theoretical power and simplicity are only secondary. + + GNU CC gets most of the information about the target machine from a +machine description which gives an algebraic formula for each of the +machine's instructions. This is a very clean way to describe the +target. But when the compiler needs information that is difficult to +express in this fashion, I have not hesitated to define an ad-hoc +parameter to the machine description. The purpose of portability is to +reduce the total work needed on the compiler; it was not of interest +for its own sake. + + GNU CC does not contain machine dependent code, but it does contain +code that depends on machine parameters such as endianness (whether the +most significant byte has the highest or lowest address of the bytes in +a word) and the availability of autoincrement addressing. In the +RTL-generation pass, it is often necessary to have multiple strategies +for generating code for a particular kind of syntax tree, strategies +that are usable for different combinations of parameters. Often I have +not tried to address all possible cases, but only the common ones or +only the ones that I have encountered. As a result, a new target may +require additional strategies. You will know if this happens because +the compiler will call `abort'. Fortunately, the new strategies can be +added in a machine-independent fashion, and will affect only the target +machines that need them.  -File: gcc.info, Node: Storage Layout, Next: Type Layout, Prev: Run-time Target, Up: Target Macros +File: gcc.info, Node: Interface, Next: Passes, Prev: Portability, Up: Top -Storage Layout -============== +Interfacing to GNU CC Output +**************************** - Note that the definitions of the macros in this table which are -sizes or alignments measured in bits do not need to be constant. They -can be C expressions that refer to static variables, such as the -`target_flags'. *Note Run-time Target::. - -`BITS_BIG_ENDIAN' - Define this macro to be the value 1 if the most significant bit in - a byte has the lowest number; otherwise define it to be the value - zero. This means that bit-field instructions count from the most - significant bit. If the machine has no bit-field instructions, - this macro is irrelevant. - - This macro does not affect the way structure fields are packed into - bytes or words; that is controlled by `BYTES_BIG_ENDIAN'. - -`BYTES_BIG_ENDIAN' - Define this macro to be 1 if the most significant byte in a word - has the lowest number. - -`WORDS_BIG_ENDIAN' - Define this macro to be 1 if, in a multiword object, the most - significant word has the lowest number. - -`BITS_PER_UNIT' - Number of bits in an addressable storage unit (byte); normally 8. - -`BITS_PER_WORD' - Number of bits in a word; normally 32. - -`MAX_BITS_PER_WORD' - Maximum number of bits in a word. If this is undefined, the - default is `BITS_PER_WORD'. Otherwise, it is the constant value - that is the largest value that `BITS_PER_WORD' can have at - run-time. - -`UNITS_PER_WORD' - Number of storage units in a word; normally 4. - -`POINTER_SIZE' - Width of a pointer, in bits. - -`PARM_BOUNDARY' - Normal alignment required for function parameters on the stack, in - bits. All stack parameters receive least this much alignment - regardless of data type. On most machines, this is the same as the - size of an integer. - -`STACK_BOUNDARY' - Define this macro if you wish to preserve a certain alignment for - the stack pointer. The definition is a C expression for the - desired alignment (measured in bits). - - If `PUSH_ROUNDING' is not defined, the stack will always be aligned - to the specified boundary. If `PUSH_ROUNDING' is defined and - specifies a less strict alignment than `STACK_BOUNDARY', the stack - may be momentarily unaligned while pushing arguments. - -`FUNCTION_BOUNDARY' - Alignment required for a function entry point, in bits. - -`BIGGEST_ALIGNMENT' - Biggest alignment that any data type can require on this machine, - in bits. - -`BIGGEST_FIELD_ALIGNMENT' - Biggest alignment that any structure field can require on this - machine, in bits. If defined, this overrides `BIGGEST_ALIGNMENT' - for structure fields only. - -`MAX_OFILE_ALIGNMENT' - Biggest alignment supported by the object file format of this - machine. Use this macro to limit the alignment which can be - specified using the `__attribute__ ((aligned (N)))' construct. If - not defined, the default value is `BIGGEST_ALIGNMENT'. - -`DATA_ALIGNMENT (TYPE, BASIC-ALIGN)' - If defined, a C expression to compute the alignment for a static - variable. TYPE is the data type, and BASIC-ALIGN is the alignment - that the object would ordinarily have. The value of this macro is - used instead of that alignment to align the object. - - If this macro is not defined, then BASIC-ALIGN is used. - - One use of this macro is to increase alignment of medium-size data - to make it all fit in fewer cache lines. Another is to cause - character arrays to be word-aligned so that `strcpy' calls that - copy constants to character arrays can be done inline. - -`CONSTANT_ALIGNMENT (CONSTANT, BASIC-ALIGN)' - If defined, a C expression to compute the alignment given to a - constant that is being placed in memory. CONSTANT is the constant - and BASIC-ALIGN is the alignment that the object would ordinarily - have. The value of this macro is used instead of that alignment to - align the object. - - If this macro is not defined, then BASIC-ALIGN is used. - - The typical use of this macro is to increase alignment for string - constants to be word aligned so that `strcpy' calls that copy - constants can be done inline. - -`EMPTY_FIELD_BOUNDARY' - Alignment in bits to be given to a structure bit field that - follows an empty field such as `int : 0;'. - - Note that `PCC_BITFIELD_TYPE_MATTERS' also affects the alignment - that results from an empty field. - -`STRUCTURE_SIZE_BOUNDARY' - Number of bits which any structure or union's size must be a - multiple of. Each structure or union's size is rounded up to a - multiple of this. - - If you do not define this macro, the default is the same as - `BITS_PER_UNIT'. - -`STRICT_ALIGNMENT' - Define this macro to be the value 1 if instructions will fail to - work if given data not on the nominal alignment. If instructions - will merely go slower in that case, define this macro as 0. - -`PCC_BITFIELD_TYPE_MATTERS' - Define this if you wish to imitate the way many other C compilers - handle alignment of bitfields and the structures that contain them. - - The behavior is that the type written for a bitfield (`int', - `short', or other integer type) imposes an alignment for the - entire structure, as if the structure really did contain an - ordinary field of that type. In addition, the bitfield is placed - within the structure so that it would fit within such a field, not - crossing a boundary for it. - - Thus, on most machines, a bitfield whose type is written as `int' - would not cross a four-byte boundary, and would force four-byte - alignment for the whole structure. (The alignment used may not be - four bytes; it is controlled by the other alignment parameters.) - - If the macro is defined, its definition should be a C expression; - a nonzero value for the expression enables this behavior. - - Note that if this macro is not defined, or its value is zero, some - bitfields may cross more than one alignment boundary. The - compiler can support such references if there are `insv', `extv', - and `extzv' insns that can directly reference memory. - - The other known way of making bitfields work is to define - `STRUCTURE_SIZE_BOUNDARY' as large as `BIGGEST_ALIGNMENT'. Then - every structure can be accessed with fullwords. - - Unless the machine has bitfield instructions or you define - `STRUCTURE_SIZE_BOUNDARY' that way, you must define - `PCC_BITFIELD_TYPE_MATTERS' to have a nonzero value. - -`BITFIELD_NBYTES_LIMITED' - Like PCC_BITFIELD_TYPE_MATTERS except that its effect is limited to - aligning a bitfield within the structure. - -`ROUND_TYPE_SIZE (STRUCT, SIZE, ALIGN)' - Define this macro as an expression for the overall size of a - structure (given by STRUCT as a tree node) when the size computed - from the fields is SIZE and the alignment is ALIGN. - - The default is to round SIZE up to a multiple of ALIGN. - -`ROUND_TYPE_ALIGN (STRUCT, COMPUTED, SPECIFIED)' - Define this macro as an expression for the alignment of a structure - (given by STRUCT as a tree node) if the alignment computed in the - usual way is COMPUTED and the alignment explicitly specified was - SPECIFIED. - - The default is to use SPECIFIED if it is larger; otherwise, use - the smaller of COMPUTED and `BIGGEST_ALIGNMENT' - -`MAX_FIXED_MODE_SIZE' - An integer expression for the size in bits of the largest integer - machine mode that should actually be used. All integer machine - modes of this size or smaller can be used for structures and - unions with the appropriate sizes. If this macro is undefined, - `GET_MODE_BITSIZE (DImode)' is assumed. - -`CHECK_FLOAT_VALUE (MODE, VALUE)' - A C statement to validate the value VALUE (of type `double') for - mode MODE. This means that you check whether VALUE fits within - the possible range of values for mode MODE on this target machine. - The mode MODE is always `SFmode' or `DFmode'. - - If VALUE is not valid, you should call `error' to print an error - message and then assign some valid value to VALUE. Allowing an - invalid value to go through the compiler can produce incorrect - assembler code which may even cause Unix assemblers to crash. - - This macro need not be defined if there is no work for it to do. - -`TARGET_FLOAT_FORMAT' - A code distinguishing the floating point format of the target - machine. There are three defined values: - - `IEEE_FLOAT_FORMAT' - This code indicates IEEE floating point. It is the default; - there is no need to define this macro when the format is IEEE. - - `VAX_FLOAT_FORMAT' - This code indicates the peculiar format used on the Vax. - - `UNKNOWN_FLOAT_FORMAT' - This code indicates any other format. - - The value of this macro is compared with `HOST_FLOAT_FORMAT' - (*note Config::.) to determine whether the target machine has the - same format as the host machine. If any other formats are - actually in use on supported machines, new codes should be defined - for them. + GNU CC is normally configured to use the same function calling +convention normally in use on the target system. This is done with the +machine-description macros described (*note Target Macros::.). + + However, returning of structure and union values is done differently +on some target machines. As a result, functions compiled with PCC +returning such types cannot be called from code compiled with GNU CC, +and vice versa. This does not cause trouble often because few Unix +library routines return structures or unions. + + GNU CC code returns structures and unions that are 1, 2, 4 or 8 bytes +long in the same registers used for `int' or `double' return values. +(GNU CC typically allocates variables of such types in registers also.) +Structures and unions of other sizes are returned by storing them into +an address passed by the caller (usually in a register). The +machine-description macros `STRUCT_VALUE' and `STRUCT_INCOMING_VALUE' +tell GNU CC where to pass this address. + + By contrast, PCC on most target machines returns structures and +unions of any size by copying the data into an area of static storage, +and then returning the address of that storage as if it were a pointer +value. The caller must copy the data from that memory area to the +place where the value is wanted. This is slower than the method used +by GNU CC, and fails to be reentrant. + + On some target machines, such as RISC machines and the 80386, the +standard system convention is to pass to the subroutine the address of +where to return the value. On these machines, GNU CC has been +configured to be compatible with the standard compiler, when this method +is used. It may not be compatible for structures of 1, 2, 4 or 8 bytes. + + GNU CC uses the system's standard convention for passing arguments. +On some machines, the first few arguments are passed in registers; in +others, all are passed on the stack. It would be possible to use +registers for argument passing on any machine, and this would probably +result in a significant speedup. But the result would be complete +incompatibility with code that follows the standard convention. So this +change is practical only if you are switching to GNU CC as the sole C +compiler for the system. We may implement register argument passing on +certain machines once we have a complete GNU system so that we can +compile the libraries with GNU CC. + + On some machines (particularly the Sparc), certain types of arguments +are passed "by invisible reference". This means that the value is +stored in memory, and the address of the memory location is passed to +the subroutine. + + If you use `longjmp', beware of automatic variables. ANSI C says +that automatic variables that are not declared `volatile' have undefined +values after a `longjmp'. And this is all GNU CC promises to do, +because it is very difficult to restore register variables correctly, +and one of GNU CC's features is that it can put variables in registers +without your asking it to. + + If you want a variable to be unaltered by `longjmp', and you don't +want to write `volatile' because old C compilers don't accept it, just +take the address of the variable. If a variable's address is ever +taken, even if just to compute it and ignore it, then the variable +cannot go in a register: + + { + int careful; + &careful; + ... + } + + Code compiled with GNU CC may call certain library routines. Most of +them handle arithmetic for which there are no instructions. This +includes multiply and divide on some machines, and floating point +operations on any machine for which floating point support is disabled +with `-msoft-float'. Some standard parts of the C library, such as +`bcopy' or `memcpy', are also called automatically. The usual function +call interface is used for calling the library routines. + + These library routines should be defined in the library `libgcc.a', +which GNU CC automatically searches whenever it links a program. On +machines that have multiply and divide instructions, if hardware +floating point is in use, normally `libgcc.a' is not needed, but it is +searched just in case. + + Each arithmetic function is defined in `libgcc1.c' to use the +corresponding C arithmetic operator. As long as the file is compiled +with another C compiler, which supports all the C arithmetic operators, +this file will work portably. However, `libgcc1.c' does not work if +compiled with GNU CC, because each arithmetic function would compile +into a call to itself!  -File: gcc.info, Node: Type Layout, Next: Registers, Prev: Storage Layout, Up: Target Macros +File: gcc.info, Node: Passes, Next: RTL, Prev: Interface, Up: Top -Layout of Source Language Data Types -==================================== +Passes and Files of the Compiler +******************************** - These macros define the sizes and other characteristics of the -standard basic data types used in programs being compiled. Unlike the -macros in the previous section, these apply to specific features of C -and related languages, rather than to fundamental aspects of storage -layout. - -`INT_TYPE_SIZE' - A C expression for the size in bits of the type `int' on the - target machine. If you don't define this, the default is one word. - -`SHORT_TYPE_SIZE' - A C expression for the size in bits of the type `short' on the - target machine. If you don't define this, the default is half a - word. (If this would be less than one storage unit, it is rounded - up to one unit.) - -`LONG_TYPE_SIZE' - A C expression for the size in bits of the type `long' on the - target machine. If you don't define this, the default is one word. - -`LONG_LONG_TYPE_SIZE' - A C expression for the size in bits of the type `long long' on the - target machine. If you don't define this, the default is two - words. - -`CHAR_TYPE_SIZE' - A C expression for the size in bits of the type `char' on the - target machine. If you don't define this, the default is one - quarter of a word. (If this would be less than one storage unit, - it is rounded up to one unit.) - -`FLOAT_TYPE_SIZE' - A C expression for the size in bits of the type `float' on the - target machine. If you don't define this, the default is one word. - -`DOUBLE_TYPE_SIZE' - A C expression for the size in bits of the type `double' on the - target machine. If you don't define this, the default is two - words. - -`LONG_DOUBLE_TYPE_SIZE' - A C expression for the size in bits of the type `long double' on - the target machine. If you don't define this, the default is two - words. - -`DEFAULT_SIGNED_CHAR' - An expression whose value is 1 or 0, according to whether the type - `char' should be signed or unsigned by default. The user can - always override this default with the options `-fsigned-char' and - `-funsigned-char'. - -`DEFAULT_SHORT_ENUMS' - A C expression to determine whether to give an `enum' type only as - many bytes as it takes to represent the range of possible values - of that type. A nonzero value means to do that; a zero value - means all `enum' types should be allocated like `int'. - - If you don't define the macro, the default is 0. - -`SIZE_TYPE' - A C expression for a string describing the name of the data type - to use for size values. The typedef name `size_t' is defined - using the contents of the string. - - The string can contain more than one keyword. If so, separate - them with spaces, and write first any length keyword, then - `unsigned' if appropriate, and finally `int'. The string must - exactly match one of the data type names defined in the function - `init_decl_processing' in the file `c-decl.c'. You may not omit - `int' or change the order--that would cause the compiler to crash - on startup. - - If you don't define this macro, the default is `"long unsigned - int"'. - -`PTRDIFF_TYPE' - A C expression for a string describing the name of the data type - to use for the result of subtracting two pointers. The typedef - name `ptrdiff_t' is defined using the contents of the string. See - `SIZE_TYPE' above for more information. - - If you don't define this macro, the default is `"long int"'. - -`WCHAR_TYPE' - A C expression for a string describing the name of the data type - to use for wide characters. The typedef name `wchar_t' is defined - using the contents of the string. See `SIZE_TYPE' above for more - information. - - If you don't define this macro, the default is `"int"'. - -`WCHAR_TYPE_SIZE' - A C expression for the size in bits of the data type for wide - characters. This is used in `cpp', which cannot make use of - `WCHAR_TYPE'. - -`OBJC_INT_SELECTORS' - Define this macro if the type of Objective C selectors should be - `int'. - - If this macro is not defined, then selectors should have the type - `struct objc_selector *'. - -`OBJC_SELECTORS_WITHOUT_LABELS' - Define this macro if the compiler can group all the selectors - together into a vector and use just one label at the beginning of - the vector. Otherwise, the compiler must give each selector its - own assembler label. - - On certain machines, it is important to have a separate label for - each selector because this enables the linker to eliminate - duplicate selectors. - -`TARGET_BELL' - A C constant expression for the integer value for escape sequence - `\a'. - -`TARGET_BS' -`TARGET_TAB' -`TARGET_NEWLINE' - C constant expressions for the integer values for escape sequences - `\b', `\t' and `\n'. - -`TARGET_VT' -`TARGET_FF' -`TARGET_CR' - C constant expressions for the integer values for escape sequences - `\v', `\f' and `\r'. + The overall control structure of the compiler is in `toplev.c'. This +file is responsible for initialization, decoding arguments, opening and +closing files, and sequencing the passes. + + The parsing pass is invoked only once, to parse the entire input. +The RTL intermediate code for a function is generated as the function +is parsed, a statement at a time. Each statement is read in as a +syntax tree and then converted to RTL; then the storage for the tree +for the statement is reclaimed. Storage for types (and the expressions +for their sizes), declarations, and a representation of the binding +contours and how they nest, remain until the function is finished being +compiled; these are all needed to output the debugging information. + + Each time the parsing pass reads a complete function definition or +top-level declaration, it calls either the function +`rest_of_compilation', or the function `rest_of_decl_compilation' in +`toplev.c', which are responsible for all further processing necessary, +ending with output of the assembler language. All other compiler +passes run, in sequence, within `rest_of_compilation'. When that +function returns from compiling a function definition, the storage used +for that function definition's compilation is entirely freed, unless it +is an inline function (*note An Inline Function is As Fast As a Macro: +Inline.). + + Here is a list of all the passes of the compiler and their source +files. Also included is a description of where debugging dumps can be +requested with `-d' options. + + * Parsing. This pass reads the entire text of a function definition, + constructing partial syntax trees. This and RTL generation are no + longer truly separate passes (formerly they were), but it is + easier to think of them as separate. + + The tree representation does not entirely follow C syntax, because + it is intended to support other languages as well. + + Language-specific data type analysis is also done in this pass, + and every tree node that represents an expression has a data type + attached. Variables are represented as declaration nodes. + + Constant folding and some arithmetic simplifications are also done + during this pass. + + The language-independent source files for parsing are + `stor-layout.c', `fold-const.c', and `tree.c'. There are also + header files `tree.h' and `tree.def' which define the format of + the tree representation. + + The source files to parse C are `c-parse.in', `c-decl.c', + `c-typeck.c', `c-aux-info.c', `c-convert.c', and `c-lang.c' along + with header files `c-lex.h', and `c-tree.h'. + + The source files for parsing C++ are `cp-parse.y', `cp-class.c', + `cp-cvt.c', `cp-decl.c', `cp-decl2.c', `cp-dem.c', `cp-except.c', + `cp-expr.c', `cp-init.c', `cp-lex.c', `cp-method.c', `cp-ptree.c', + `cp-search.c', `cp-tree.c', `cp-type2.c', and `cp-typeck.c', along + with header files `cp-tree.def', `cp-tree.h', and `cp-decl.h'. + + The special source files for parsing Objective C are + `objc-parse.y', `objc-actions.c', `objc-tree.def', and + `objc-actions.h'. Certain C-specific files are used for this as + well. + + The file `c-common.c' is also used for all of the above languages. + + * RTL generation. This is the conversion of syntax tree into RTL + code. It is actually done statement-by-statement during parsing, + but for most purposes it can be thought of as a separate pass. + + This is where the bulk of target-parameter-dependent code is found, + since often it is necessary for strategies to apply only when + certain standard kinds of instructions are available. The purpose + of named instruction patterns is to provide this information to + the RTL generation pass. + + Optimization is done in this pass for `if'-conditions that are + comparisons, boolean operations or conditional expressions. Tail + recursion is detected at this time also. Decisions are made about + how best to arrange loops and how to output `switch' statements. + + The source files for RTL generation include `stmt.c', `calls.c', + `expr.c', `explow.c', `expmed.c', `function.c', `optabs.c' and + `emit-rtl.c'. Also, the file `insn-emit.c', generated from the + machine description by the program `genemit', is used in this + pass. The header file `expr.h' is used for communication within + this pass. + + The header files `insn-flags.h' and `insn-codes.h', generated from + the machine description by the programs `genflags' and `gencodes', + tell this pass which standard names are available for use and + which patterns correspond to them. + + Aside from debugging information output, none of the following + passes refers to the tree structure representation of the function + (only part of which is saved). + + The decision of whether the function can and should be expanded + inline in its subsequent callers is made at the end of rtl + generation. The function must meet certain criteria, currently + related to the size of the function and the types and number of + parameters it has. Note that this function may contain loops, + recursive calls to itself (tail-recursive functions can be + inlined!), gotos, in short, all constructs supported by GNU CC. + The file `integrate.c' contains the code to save a function's rtl + for later inlining and to inline that rtl when the function is + called. The header file `integrate.h' is also used for this + purpose. + + The option `-dr' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.rtl' to + the input file name. + + * Jump optimization. This pass simplifies jumps to the following + instruction, jumps across jumps, and jumps to jumps. It deletes + unreferenced labels and unreachable code, except that unreachable + code that contains a loop is not recognized as unreachable in this + pass. (Such loops are deleted later in the basic block analysis.) + It also converts some code originally written with jumps into + sequences of instructions that directly set values from the + results of comparisons, if the machine has such instructions. + + Jump optimization is performed two or three times. The first time + is immediately following RTL generation. The second time is after + CSE, but only if CSE says repeated jump optimization is needed. + The last time is right before the final pass. That time, + cross-jumping and deletion of no-op move instructions are done + together with the optimizations described above. + + The source file of this pass is `jump.c'. + + The option `-dj' causes a debugging dump of the RTL code after + this pass is run for the first time. This dump file's name is + made by appending `.jump' to the input file name. + + * Register scan. This pass finds the first and last use of each + register, as a guide for common subexpression elimination. Its + source is in `regclass.c'. + + * Jump threading. This pass detects a condition jump that branches + to an identical or inverse test. Such jumps can be `threaded' + through the second conditional test. The source code for this + pass is in `jump.c'. This optimization is only performed if + `-fthread-jumps' is enabled. + + * Common subexpression elimination. This pass also does constant + propagation. Its source file is `cse.c'. If constant propagation + causes conditional jumps to become unconditional or to become + no-ops, jump optimization is run again when CSE is finished. + + The option `-ds' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.cse' to + the input file name. + + * Loop optimization. This pass moves constant expressions out of + loops, and optionally does strength-reduction and loop unrolling + as well. Its source files are `loop.c' and `unroll.c', plus the + header `loop.h' used for communication between them. Loop + unrolling uses some functions in `integrate.c' and the header + `integrate.h'. + + The option `-dL' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.loop' to + the input file name. + + * If `-frerun-cse-after-loop' was enabled, a second common + subexpression elimination pass is performed after the loop + optimization pass. Jump threading is also done again at this time + if it was specified. + + The option `-dt' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.cse2' to + the input file name. + + * Stupid register allocation is performed at this point in a + nonoptimizing compilation. It does a little data flow analysis as + well. When stupid register allocation is in use, the next pass + executed is the reloading pass; the others in between are skipped. + The source file is `stupid.c'. + + * Data flow analysis (`flow.c'). This pass divides the program into + basic blocks (and in the process deletes unreachable loops); then + it computes which pseudo-registers are live at each point in the + program, and makes the first instruction that uses a value point at + the instruction that computed the value. + + This pass also deletes computations whose results are never used, + and combines memory references with add or subtract instructions + to make autoincrement or autodecrement addressing. + + The option `-df' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.flow' to + the input file name. If stupid register allocation is in use, this + dump file reflects the full results of such allocation. + + * Instruction combination (`combine.c'). This pass attempts to + combine groups of two or three instructions that are related by + data flow into single instructions. It combines the RTL + expressions for the instructions by substitution, simplifies the + result using algebra, and then attempts to match the result + against the machine description. + + The option `-dc' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.combine' + to the input file name. + + * Instruction scheduling (`sched.c'). This pass looks for + instructions whose output will not be available by the time that + it is used in subsequent instructions. (Memory loads and floating + point instructions often have this behavior on RISC machines). It + re-orders instructions within a basic block to try to separate the + definition and use of items that otherwise would cause pipeline + stalls. + + Instruction scheduling is performed twice. The first time is + immediately after instruction combination and the second is + immediately after reload. + + The option `-dS' causes a debugging dump of the RTL code after this + pass is run for the first time. The dump file's name is made by + appending `.sched' to the input file name. + + * Register class preferencing. The RTL code is scanned to find out + which register class is best for each pseudo register. The source + file is `regclass.c'. + + * Local register allocation (`local-alloc.c'). This pass allocates + hard registers to pseudo registers that are used only within one + basic block. Because the basic block is linear, it can use fast + and powerful techniques to do a very good job. + + The option `-dl' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.lreg' to + the input file name. + + * Global register allocation (`global.c'). This pass allocates hard + registers for the remaining pseudo registers (those whose life + spans are not contained in one basic block). + + * Reloading. This pass renumbers pseudo registers with the hardware + registers numbers they were allocated. Pseudo registers that did + not get hard registers are replaced with stack slots. Then it + finds instructions that are invalid because a value has failed to + end up in a register, or has ended up in a register of the wrong + kind. It fixes up these instructions by reloading the + problematical values temporarily into registers. Additional + instructions are generated to do the copying. + + The reload pass also optionally eliminates the frame pointer and + inserts instructions to save and restore call-clobbered registers + around calls. + + Source files are `reload.c' and `reload1.c', plus the header + `reload.h' used for communication between them. + + The option `-dg' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.greg' to + the input file name. + + * Instruction scheduling is repeated here to try to avoid pipeline + stalls due to memory loads generated for spilled pseudo registers. + + The option `-dR' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.sched2' + to the input file name. + + * Jump optimization is repeated, this time including cross-jumping + and deletion of no-op move instructions. + + The option `-dJ' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.jump2' to + the input file name. + + * Delayed branch scheduling. This optional pass attempts to find + instructions that can go into the delay slots of other + instructions, usually jumps and calls. The source file name is + `reorg.c'. + + The option `-dd' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.dbr' to + the input file name. + + * Conversion from usage of some hard registers to usage of a register + stack may be done at this point. Currently, this is supported only + for the floating-point registers of the Intel 80387 coprocessor. + The source file name is `reg-stack.c'. + + The options `-dk' causes a debugging dump of the RTL code after + this pass. This dump file's name is made by appending `.stack' to + the input file name. + + * Final. This pass outputs the assembler code for the function. It + is also responsible for identifying spurious test and compare + instructions. Machine-specific peephole optimizations are + performed at the same time. The function entry and exit sequences + are generated directly as assembler code in this pass; they never + exist as RTL. + + The source files are `final.c' plus `insn-output.c'; the latter is + generated automatically from the machine description by the tool + `genoutput'. The header file `conditions.h' is used for + communication between these files. + + * Debugging information output. This is run after final because it + must output the stack slot offsets for pseudo registers that did + not get hard registers. Source files are `dbxout.c' for DBX + symbol table format, `sdbout.c' for SDB symbol table format, and + `dwarfout.c' for DWARF symbol table format. + + Some additional files are used by all or many passes: + + * Every pass uses `machmode.def' and `machmode.h' which define the + machine modes. + + * Several passes use `real.h', which defines the default + representation of floating point constants and how to operate on + them. + + * All the passes that work with RTL use the header files `rtl.h' and + `rtl.def', and subroutines in file `rtl.c'. The tools `gen*' also + use these files to read and work with the machine description RTL. + + * Several passes refer to the header file `insn-config.h' which + contains a few parameters (C macro definitions) generated + automatically from the machine description RTL by the tool + `genconfig'. + + * Several passes use the instruction recognizer, which consists of + `recog.c' and `recog.h', plus the files `insn-recog.c' and + `insn-extract.c' that are generated automatically from the machine + description by the tools `genrecog' and `genextract'. + + * Several passes use the header files `regs.h' which defines the + information recorded about pseudo register usage, and + `basic-block.h' which defines the information recorded about basic + blocks. + + * `hard-reg-set.h' defines the type `HARD_REG_SET', a bit-vector + with a bit for each hard register, and some macros to manipulate + it. This type is just `int' if the machine has few enough hard + registers; otherwise it is an array of `int' and some of the + macros expand into loops. + + * Several passes use instruction attributes. A definition of the + attributes defined for a particular machine is in file + `insn-attr.h', which is generated from the machine description by + the program `genattr'. The file `insn-attrtab.c' contains + subroutines to obtain the attribute values for insns. It is + generated from the machine description by the program `genattrtab'.  -File: gcc.info, Node: Registers, Next: Register Classes, Prev: Type Layout, Up: Target Macros +File: gcc.info, Node: RTL, Next: Machine Desc, Prev: Passes, Up: Top -Register Usage -============== +RTL Representation +****************** - This section explains how to describe what registers the target -machine has, and how (in general) they can be used. - - The description of which registers a specific instruction can use is -done with register classes; see *Note Register Classes::. For -information on using registers to access a stack frame, see *Note Frame -Registers::. For passing values in registers, see *Note Register -Arguments::. For returning values in registers, see *Note Scalar -Return::. + Most of the work of the compiler is done on an intermediate +representation called register transfer language. In this language, +the instructions to be output are described, pretty much one by one, in +an algebraic form that describes what the instruction does. + + RTL is inspired by Lisp lists. It has both an internal form, made +up of structures that point at other structures, and a textual form +that is used in the machine description and in printed debugging dumps. +The textual form uses nested parentheses to indicate the pointers in +the internal form. * Menu: -* Register Basics:: Number and kinds of registers. -* Allocation Order:: Order in which registers are allocated. -* Values in Registers:: What kinds of values each reg can hold. -* Leaf Functions:: Renumbering registers for leaf functions. -* Stack Registers:: Handling a register stack such as 80387. -* Obsolete Register Macros:: Macros formerly used for the 80387. - - -File: gcc.info, Node: Register Basics, Next: Allocation Order, Up: Registers - -Basic Characteristics of Registers ----------------------------------- - -`FIRST_PSEUDO_REGISTER' - Number of hardware registers known to the compiler. They receive - numbers 0 through `FIRST_PSEUDO_REGISTER-1'; thus, the first - pseudo register's number really is assigned the number - `FIRST_PSEUDO_REGISTER'. - -`FIXED_REGISTERS' - An initializer that says which registers are used for fixed - purposes all throughout the compiled code and are therefore not - available for general allocation. These would include the stack - pointer, the frame pointer (except on machines where that can be - used as a general register when no frame pointer is needed), the - program counter on machines where that is considered one of the - addressable registers, and any other numbered register with a - standard use. - - This information is expressed as a sequence of numbers, separated - by commas and surrounded by braces. The Nth number is 1 if - register N is fixed, 0 otherwise. - - The table initialized from this macro, and the table initialized by - the following one, may be overridden at run time either - automatically, by the actions of the macro - `CONDITIONAL_REGISTER_USAGE', or by the user with the command - options `-ffixed-REG', `-fcall-used-REG' and `-fcall-saved-REG'. - -`CALL_USED_REGISTERS' - Like `FIXED_REGISTERS' but has 1 for each register that is - clobbered (in general) by function calls as well as for fixed - registers. This macro therefore identifies the registers that are - not available for general allocation of values that must live - across function calls. - - If a register has 0 in `CALL_USED_REGISTERS', the compiler - automatically saves it on function entry and restores it on - function exit, if the register is used within the function. - -`CONDITIONAL_REGISTER_USAGE' - Zero or more C statements that may conditionally modify two - variables `fixed_regs' and `call_used_regs' (both of type `char - []') after they have been initialized from the two preceding - macros. - - This is necessary in case the fixed or call-clobbered registers - depend on target flags. - - You need not define this macro if it has no work to do. - - If the usage of an entire class of registers depends on the target - flags, you may indicate this to GCC by using this macro to modify - `fixed_regs' and `call_used_regs' to 1 for each of the registers - in the classes which should not be used by GCC. Also define the - macro `REG_CLASS_FROM_LETTER' to return `NO_REGS' if it is called - with a letter for a class that shouldn't be used. - - (However, if this class is not included in `GENERAL_REGS' and all - of the insn patterns whose constraints permit this class are - controlled by target switches, then GCC will automatically avoid - using these registers when the target switches are opposed to - them.) - -`NON_SAVING_SETJMP' - If this macro is defined and has a nonzero value, it means that - `setjmp' and related functions fail to save the registers, or that - `longjmp' fails to restore them. To compensate, the compiler - avoids putting variables in registers in functions that use - `setjmp'. +* RTL Objects:: Expressions vs vectors vs strings vs integers. +* Accessors:: Macros to access expression operands or vector elts. +* Flags:: Other flags in an RTL expression. +* Machine Modes:: Describing the size and format of a datum. +* Constants:: Expressions with constant values. +* Regs and Memory:: Expressions representing register contents or memory. +* Arithmetic:: Expressions representing arithmetic on other expressions. +* Comparisons:: Expressions representing comparison of expressions. +* Bit Fields:: Expressions representing bitfields in memory or reg. +* Conversions:: Extending, truncating, floating or fixing. +* RTL Declarations:: Declaring volatility, constancy, etc. +* Side Effects:: Expressions for storing in registers, etc. +* Incdec:: Embedded side-effects for autoincrement addressing. +* Assembler:: Representing `asm' with operands. +* Insns:: Expression types for entire insns. +* Calls:: RTL representation of function call insns. +* Sharing:: Some expressions are unique; others *must* be copied. +* Reading RTL:: Reading textual RTL from a file.  -File: gcc.info, Node: Allocation Order, Next: Values in Registers, Prev: Register Basics, Up: Registers +File: gcc.info, Node: RTL Objects, Next: Accessors, Prev: RTL, Up: RTL -Order of Allocation of Registers --------------------------------- - -`REG_ALLOC_ORDER' - If defined, an initializer for a vector of integers, containing the - numbers of hard registers in the order in which GNU CC should - prefer to use them (from most preferred to least). - - If this macro is not defined, registers are used lowest numbered - first (all else being equal). - - One use of this macro is on machines where the highest numbered - registers must always be saved and the save-multiple-registers - instruction supports only sequences of consecutive registers. On - such machines, define `REG_ALLOC_ORDER' to be an initializer that - lists the highest numbered allocatable register first. - -`ORDER_REGS_FOR_LOCAL_ALLOC' - A C statement (sans semicolon) to choose the order in which to - allocate hard registers for pseudo-registers local to a basic - block. - - Store the desired order of registers in the array - `reg_alloc_order'. Element 0 should be the register to allocate - first; element 1, the next register; and so on. - - The macro body should not assume anything about the contents of - `reg_alloc_order' before execution of the macro. - - On most machines, it is not necessary to define this macro. - - -File: gcc.info, Node: Values in Registers, Next: Leaf Functions, Prev: Allocation Order, Up: Registers +RTL Object Types +================ -How Values Fit in Registers ---------------------------- + RTL uses five kinds of objects: expressions, integers, wide integers, +strings and vectors. Expressions are the most important ones. An RTL +expression ("RTX", for short) is a C structure, but it is usually +referred to with a pointer; a type that is given the typedef name `rtx'. + + An integer is simply an `int'; their written form uses decimal +digits. A wide integer is an integral object whose type is +`HOST_WIDE_INT' (*note Config::.); their written form uses decimal +digits. + + A string is a sequence of characters. In core it is represented as a +`char *' in usual C fashion, and it is written in C syntax as well. +However, strings in RTL may never be null. If you write an empty +string in a machine description, it is represented in core as a null +pointer rather than as a pointer to a null character. In certain +contexts, these null pointers instead of strings are valid. Within RTL +code, strings are most commonly found inside `symbol_ref' expressions, +but they appear in other contexts in the RTL expressions that make up +machine descriptions. + + A vector contains an arbitrary number of pointers to expressions. +The number of elements in the vector is explicitly present in the +vector. The written form of a vector consists of square brackets +(`[...]') surrounding the elements, in sequence and with whitespace +separating them. Vectors of length zero are not created; null pointers +are used instead. + + Expressions are classified by "expression codes" (also called RTX +codes). The expression code is a name defined in `rtl.def', which is +also (in upper case) a C enumeration constant. The possible expression +codes and their meanings are machine-independent. The code of an RTX +can be extracted with the macro `GET_CODE (X)' and altered with +`PUT_CODE (X, NEWCODE)'. + + The expression code determines how many operands the expression +contains, and what kinds of objects they are. In RTL, unlike Lisp, you +cannot tell by looking at an operand what kind of object it is. +Instead, you must know from its context--from the expression code of +the containing expression. For example, in an expression of code +`subreg', the first operand is to be regarded as an expression and the +second operand as an integer. In an expression of code `plus', there +are two operands, both of which are to be regarded as expressions. In +a `symbol_ref' expression, there is one operand, which is to be +regarded as a string. + + Expressions are written as parentheses containing the name of the +expression type, its flags and machine mode if any, and then the +operands of the expression (separated by spaces). + + Expression code names in the `md' file are written in lower case, +but when they appear in C code they are written in upper case. In this +manual, they are shown as follows: `const_int'. - This section discusses the macros that describe which kinds of values -(specifically, which machine modes) each register can hold, and how many -consecutive registers are needed for a given mode. - -`HARD_REGNO_NREGS (REGNO, MODE)' - A C expression for the number of consecutive hard registers, - starting at register number REGNO, required to hold a value of mode - MODE. - - On a machine where all registers are exactly one word, a suitable - definition of this macro is - - #define HARD_REGNO_NREGS(REGNO, MODE) \ - ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) \ - / UNITS_PER_WORD)) - -`HARD_REGNO_MODE_OK (REGNO, MODE)' - A C expression that is nonzero if it is permissible to store a - value of mode MODE in hard register number REGNO (or in several - registers starting with that one). For a machine where all - registers are equivalent, a suitable definition is - - #define HARD_REGNO_MODE_OK(REGNO, MODE) 1 - - It is not necessary for this macro to check for the numbers of - fixed registers, because the allocation mechanism considers them - to be always occupied. - - On some machines, double-precision values must be kept in even/odd - register pairs. The way to implement that is to define this macro - to reject odd register numbers for such modes. - - The minimum requirement for a mode to be OK in a register is that - the `movMODE' instruction pattern support moves between the - register and any other hard register for which the mode is OK; and - that moving a value into the register and back out not alter it. - - Since the same instruction used to move `SImode' will work for all - narrower integer modes, it is not necessary on any machine for - `HARD_REGNO_MODE_OK' to distinguish between these modes, provided - you define patterns `movhi', etc., to take advantage of this. This - is useful because of the interaction between `HARD_REGNO_MODE_OK' - and `MODES_TIEABLE_P'; it is very desirable for all integer modes - to be tieable. - - Many machines have special registers for floating point arithmetic. - Often people assume that floating point machine modes are allowed - only in floating point registers. This is not true. Any - registers that can hold integers can safely *hold* a floating - point machine mode, whether or not floating arithmetic can be done - on it in those registers. Integer move instructions can be used - to move the values. - - On some machines, though, the converse is true: fixed-point machine - modes may not go in floating registers. This is true if the - floating registers normalize any value stored in them, because - storing a non-floating value there would garble it. In this case, - `HARD_REGNO_MODE_OK' should reject fixed-point machine modes in - floating registers. But if the floating registers do not - automatically normalize, if you can store any bit pattern in one - and retrieve it unchanged without a trap, then any machine mode - may go in a floating register, so you can define this macro to say - so. - - On some machines, such as the Sparc and the Mips, we get better - code by defining `HARD_REGNO_MODE_OK' to forbid integers in - floating registers, even though the hardware is capable of - handling them. This is because transferring values between - floating registers and general registers is so slow that it is - better to keep the integer in memory. - - The primary significance of special floating registers is rather - that they are the registers acceptable in floating point arithmetic - instructions. However, this is of no concern to - `HARD_REGNO_MODE_OK'. You handle it by writing the proper - constraints for those instructions. - - On some machines, the floating registers are especially slow to - access, so that it is better to store a value in a stack frame - than in such a register if floating point arithmetic is not being - done. As long as the floating registers are not in class - `GENERAL_REGS', they will not be used unless some pattern's - constraint asks for one. - -`MODES_TIEABLE_P (MODE1, MODE2)' - A C expression that is nonzero if it is desirable to choose - register allocation so as to avoid move instructions between a - value of mode MODE1 and a value of mode MODE2. - - If `HARD_REGNO_MODE_OK (R, MODE1)' and `HARD_REGNO_MODE_OK (R, - MODE2)' are ever different for any R, then `MODES_TIEABLE_P (MODE1, - MODE2)' must be zero. + In a few contexts a null pointer is valid where an expression is +normally wanted. The written form of this is `(nil)'.  -File: gcc.info, Node: Leaf Functions, Next: Stack Registers, Prev: Values in Registers, Up: Registers +File: gcc.info, Node: Accessors, Next: Flags, Prev: RTL Objects, Up: RTL -Handling Leaf Functions ------------------------ +Access to Operands +================== - On some machines, a leaf function (i.e., one which make no calls) -can run more efficiently if it does not make its own register window. -Often this means it is required to receive its arguments in the -registers where they are passed by the caller, instead of the registers -where they would normally arrive. - - The special treatment for leaf functions generally applies only when -other conditions are met; for example, often they may use only those -registers for its own variables and temporaries. We use the term "leaf -function" to mean a function that is suitable for this special -handling, so that functions with no calls are not necessarily "leaf -functions". - - GNU CC assigns register numbers before it knows whether the function -is suitable for leaf function treatment. So it needs to renumber the -registers in order to output a leaf function. The following macros -accomplish this. - -`LEAF_REGISTERS' - A C initializer for a vector, indexed by hard register number, - which contains 1 for a register that is allowable in a candidate - for leaf function treatment. - - If leaf function treatment involves renumbering the registers, - then the registers marked here should be the ones before - renumbering--those that GNU CC would ordinarily allocate. The - registers which will actually be used in the assembler code, after - renumbering, should not be marked with 1 in this vector. - - Define this macro only if the target machine offers a way to - optimize the treatment of leaf functions. - -`LEAF_REG_REMAP (REGNO)' - A C expression whose value is the register number to which REGNO - should be renumbered, when a function is treated as a leaf - function. - - If REGNO is a register number which should not appear in a leaf - function before renumbering, then the expression should yield -1, - which will cause the compiler to abort. - - Define this macro only if the target machine offers a way to - optimize the treatment of leaf functions, and registers need to be - renumbered to do this. - -`REG_LEAF_ALLOC_ORDER' - If defined, an initializer for a vector of integers, containing the - numbers of hard registers in the order in which the GNU CC should - prefer to use them (from most preferred to least) in a leaf - function. If this macro is not defined, REG_ALLOC_ORDER is used - for both non-leaf and leaf-functions. - - Normally, it is necessary for `FUNCTION_PROLOGUE' and -`FUNCTION_EPILOGUE' to treat leaf functions specially. It can test the -C variable `leaf_function' which is nonzero for leaf functions. (The -variable `leaf_function' is defined only if `LEAF_REGISTERS' is -defined.) + For each expression type `rtl.def' specifies the number of contained +objects and their kinds, with four possibilities: `e' for expression +(actually a pointer to an expression), `i' for integer, `w' for wide +integer, `s' for string, and `E' for vector of expressions. The +sequence of letters for an expression code is called its "format". +Thus, the format of `subreg' is `ei'. + + A few other format characters are used occasionally: + +`u' + `u' is equivalent to `e' except that it is printed differently in + debugging dumps. It is used for pointers to insns. + +`n' + `n' is equivalent to `i' except that it is printed differently in + debugging dumps. It is used for the line number or code number of + a `note' insn. + +`S' + `S' indicates a string which is optional. In the RTL objects in + core, `S' is equivalent to `s', but when the object is read, from + an `md' file, the string value of this operand may be omitted. An + omitted string is taken to be the null string. + +`V' + `V' indicates a vector which is optional. In the RTL objects in + core, `V' is equivalent to `E', but when the object is read from + an `md' file, the vector value of this operand may be omitted. An + omitted vector is effectively the same as a vector of no elements. + +`0' + `0' means a slot whose contents do not fit any normal category. + `0' slots are not printed at all in dumps, and are often used in + special ways by small parts of the compiler. + + There are macros to get the number of operands, the format, and the +class of an expression code: + +`GET_RTX_LENGTH (CODE)' + Number of operands of an RTX of code CODE. + +`GET_RTX_FORMAT (CODE)' + The format of an RTX of code CODE, as a C string. + +`GET_RTX_CLASS (CODE)' + A single character representing the type of RTX operation that code + CODE performs. + + The following classes are defined: + + `o' + An RTX code that represents an actual object, such as `reg' or + `mem'. `subreg' is not in this class. + + `<' + An RTX code for a comparison. The codes in this class are + `NE', `EQ', `LE', `LT', `GE', `GT', `LEU', `LTU', `GEU', + `GTU'. + + `1' + An RTX code for a unary arithmetic operation, such as `neg'. + + `c' + An RTX code for a commutative binary operation, other than + `NE' and `EQ' (which have class `<'). + + `2' + An RTX code for a noncommutative binary operation, such as + `MINUS'. + + `b' + An RTX code for a bitfield operation, either `ZERO_EXTRACT' or + `SIGN_EXTRACT'. + + `3' + An RTX code for other three input operations, such as + `IF_THEN_ELSE'. + + `i' + An RTX code for a machine insn (`INSN', `JUMP_INSN', and + `CALL_INSN'). + + `m' + An RTX code for something that matches in insns, such as + `MATCH_DUP'. + + `x' + All other RTX codes. + + Operands of expressions are accessed using the macros `XEXP', +`XINT', `XWINT' and `XSTR'. Each of these macros takes two arguments: +an expression-pointer (RTX) and an operand number (counting from zero). +Thus, + + XEXP (X, 2) + +accesses operand 2 of expression X, as an expression. + + XINT (X, 2) + +accesses the same operand as an integer. `XSTR', used in the same +fashion, would access it as a string. + + Any operand can be accessed as an integer, as an expression or as a +string. You must choose the correct method of access for the kind of +value actually stored in the operand. You would do this based on the +expression code of the containing expression. That is also how you +would know how many operands there are. + + For example, if X is a `subreg' expression, you know that it has two +operands which can be correctly accessed as `XEXP (X, 0)' and `XINT (X, +1)'. If you did `XINT (X, 0)', you would get the address of the +expression operand but cast as an integer; that might occasionally be +useful, but it would be cleaner to write `(int) XEXP (X, 0)'. `XEXP +(X, 1)' would also compile without error, and would return the second, +integer operand cast as an expression pointer, which would probably +result in a crash when accessed. Nothing stops you from writing `XEXP +(X, 28)' either, but this will access memory past the end of the +expression with unpredictable results. + + Access to operands which are vectors is more complicated. You can +use the macro `XVEC' to get the vector-pointer itself, or the macros +`XVECEXP' and `XVECLEN' to access the elements and length of a vector. + +`XVEC (EXP, IDX)' + Access the vector-pointer which is operand number IDX in EXP. + +`XVECLEN (EXP, IDX)' + Access the length (number of elements) in the vector which is in + operand number IDX in EXP. This value is an `int'. + +`XVECEXP (EXP, IDX, ELTNUM)' + Access element number ELTNUM in the vector which is in operand + number IDX in EXP. This value is an RTX. + + It is up to you to make sure that ELTNUM is not negative and is + less than `XVECLEN (EXP, IDX)'. + + All the macros defined in this section expand into lvalues and +therefore can be used to assign the operands, lengths and vector +elements as well as to access them.  -File: gcc.info, Node: Stack Registers, Next: Obsolete Register Macros, Prev: Leaf Functions, Up: Registers - -Registers That Form a Stack ---------------------------- - - There are special features to handle computers where some of the -"registers" form a stack, as in the 80387 coprocessor for the 80386. -Stack registers are normally written by pushing onto the stack, and are -numbered relative to the top of the stack. - - Currently, GNU CC can only handle one group of stack-like registers, -and they must be consecutively numbered. - -`STACK_REGS' - Define this if the machine has any stack-like registers. - -`FIRST_STACK_REG' - The number of the first stack-like register. This one is the top - of the stack. - -`LAST_STACK_REG' - The number of the last stack-like register. This one is the - bottom of the stack. - - -File: gcc.info, Node: Obsolete Register Macros, Prev: Stack Registers, Up: Registers - -Obsolete Macros for Controlling Register Usage ----------------------------------------------- +File: gcc.info, Node: Flags, Next: Machine Modes, Prev: Accessors, Up: RTL - These features do not work very well. They exist because they used -to be required to generate correct code for the 80387 coprocessor of the -80386. They are no longer used by that machine description and may be -removed in a later version of the compiler. Don't use them! - -`OVERLAPPING_REGNO_P (REGNO)' - If defined, this is a C expression whose value is nonzero if hard - register number REGNO is an overlapping register. This means a - hard register which overlaps a hard register with a different - number. (Such overlap is undesirable, but occasionally it allows a - machine to be supported which otherwise could not be.) This macro - must return nonzero for *all* the registers which overlap each - other. GNU CC can use an overlapping register only in certain - limited ways. It can be used for allocation within a basic block, - and may be spilled for reloading; that is all. - - If this macro is not defined, it means that none of the hard - registers overlap each other. This is the usual situation. - -`INSN_CLOBBERS_REGNO_P (INSN, REGNO)' - If defined, this is a C expression whose value should be nonzero if - the insn INSN has the effect of mysteriously clobbering the - contents of hard register number REGNO. By "mysterious" we mean - that the insn's RTL expression doesn't describe such an effect. - - If this macro is not defined, it means that no insn clobbers - registers mysteriously. This is the usual situation; all else - being equal, it is best for the RTL expression to show all the - activity. - -`PRESERVE_DEATH_INFO_REGNO_P (REGNO)' - If defined, this is a C expression whose value is nonzero if - accurate `REG_DEAD' notes are needed for hard register number REGNO - at the time of outputting the assembler code. When this is so, a - few optimizations that take place after register allocation and - could invalidate the death notes are not done when this register is - involved. - - You would arrange to preserve death info for a register when some - of the code in the machine description which is executed to write - the assembler code looks at the death notes. This is necessary - only when the actual hardware feature which GNU CC thinks of as a - register is not actually a register of the usual sort. (It might, - for example, be a hardware stack.) +Flags in an RTL Expression +========================== - If this macro is not defined, it means that no death notes need to - be preserved. This is the usual situation. + RTL expressions contain several flags (one-bit bitfields) that are +used in certain types of expression. Most often they are accessed with +the following macros: + +`MEM_VOLATILE_P (X)' + In `mem' expressions, nonzero for volatile memory references. + Stored in the `volatil' field and printed as `/v'. + +`MEM_IN_STRUCT_P (X)' + In `mem' expressions, nonzero for reference to an entire + structure, union or array, or to a component of one. Zero for + references to a scalar variable or through a pointer to a scalar. + Stored in the `in_struct' field and printed as `/s'. + +`REG_LOOP_TEST_P' + In `reg' expressions, nonzero if this register's entire life is + contained in the exit test code for some loop. Stored in the + `in_struct' field and printed as `/s'. + +`REG_USERVAR_P (X)' + In a `reg', nonzero if it corresponds to a variable present in the + user's source code. Zero for temporaries generated internally by + the compiler. Stored in the `volatil' field and printed as `/v'. + +`REG_FUNCTION_VALUE_P (X)' + Nonzero in a `reg' if it is the place in which this function's + value is going to be returned. (This happens only in a hard + register.) Stored in the `integrated' field and printed as `/i'. + + The same hard register may be used also for collecting the values + of functions called by this one, but `REG_FUNCTION_VALUE_P' is zero + in this kind of use. + +`SUBREG_PROMOTED_VAR_P' + Nonzero in a `subreg' if it was made when accessing an object that + was promoted to a wider mode in accord with the `PROMOTED_MODE' + machine description macro (*note Storage Layout::.). In this + case, the mode of the `subreg' is the declared mode of the object + and the mode of `SUBREG_REG' is the mode of the register that + holds the object. Promoted variables are always either sign- or + zero-extended to the wider mode on every assignment. Stored in + the `in_struct' field and printed as `/s'. + +`SUBREG_PROMOTED_UNSIGNED_P' + Nonzero in a `subreg' that has `SUBREG_PROMOTED_VAR_P' nonzero if + the object being referenced is kept zero-extended and zero if it + is kept sign-extended. Stored in the `unchanging' field and + printed as `/u'. + +`RTX_UNCHANGING_P (X)' + Nonzero in a `reg' or `mem' if the value is not changed. (This + flag is not set for memory references via pointers to constants. + Such pointers only guarantee that the object will not be changed + explicitly by the current function. The object might be changed by + other functions or by aliasing.) Stored in the `unchanging' field + and printed as `/u'. + +`RTX_INTEGRATED_P (INSN)' + Nonzero in an insn if it resulted from an in-line function call. + Stored in the `integrated' field and printed as `/i'. This may be + deleted; nothing currently depends on it. + +`SYMBOL_REF_USED (X)' + In a `symbol_ref', indicates that X has been used. This is + normally only used to ensure that X is only declared external + once. Stored in the `used' field. + +`SYMBOL_REF_FLAG (X)' + In a `symbol_ref', this is used as a flag for machine-specific + purposes. Stored in the `volatil' field and printed as `/v'. + +`LABEL_OUTSIDE_LOOP_P' + In `label_ref' expressions, nonzero if this is a reference to a + label that is outside the innermost loop containing the reference + to the label. Stored in the `in_struct' field and printed as `/s'. + +`INSN_DELETED_P (INSN)' + In an insn, nonzero if the insn has been deleted. Stored in the + `volatil' field and printed as `/v'. + +`INSN_ANNULLED_BRANCH_P (INSN)' + In an `insn' in the delay slot of a branch insn, indicates that an + annulling branch should be used. See the discussion under + `sequence' below. Stored in the `unchanging' field and printed as + `/u'. + +`INSN_FROM_TARGET_P (INSN)' + In an `insn' in a delay slot of a branch, indicates that the insn + is from the target of the branch. If the branch insn has + `INSN_ANNULLED_BRANCH_P' set, this insn should only be executed if + the branch is taken. For annulled branches with this bit clear, + the insn should be executed only if the branch is not taken. + Stored in the `in_struct' field and printed as `/s'. + +`CONSTANT_POOL_ADDRESS_P (X)' + Nonzero in a `symbol_ref' if it refers to part of the current + function's "constants pool". These are addresses close to the + beginning of the function, and GNU CC assumes they can be addressed + directly (perhaps with the help of base registers). Stored in the + `unchanging' field and printed as `/u'. + +`CONST_CALL_P (X)' + In a `call_insn', indicates that the insn represents a call to a + const function. Stored in the `unchanging' field and printed as + `/u'. + +`LABEL_PRESERVE_P (X)' + In a `code_label', indicates that the label can never be deleted. + Labels referenced by a non-local goto will have this bit set. + Stored in the `in_struct' field and printed as `/s'. + +`SCHED_GROUP_P (INSN)' + During instruction scheduling, in an insn, indicates that the + previous insn must be scheduled together with this insn. This is + used to ensure that certain groups of instructions will not be + split up by the instruction scheduling pass, for example, `use' + insns before a `call_insn' may not be separated from the + `call_insn'. Stored in the `in_struct' field and printed as `/s'. + + These are the fields which the above macros refer to: + +`used' + Normally, this flag is used only momentarily, at the end of RTL + generation for a function, to count the number of times an + expression appears in insns. Expressions that appear more than + once are copied, according to the rules for shared structure + (*note Sharing::.). + + In a `symbol_ref', it indicates that an external declaration for + the symbol has already been written. + + In a `reg', it is used by the leaf register renumbering code to + ensure that each register is only renumbered once. + +`volatil' + This flag is used in `mem', `symbol_ref' and `reg' expressions and + in insns. In RTL dump files, it is printed as `/v'. + + In a `mem' expression, it is 1 if the memory reference is volatile. + Volatile memory references may not be deleted, reordered or + combined. + + In a `symbol_ref' expression, it is used for machine-specific + purposes. + + In a `reg' expression, it is 1 if the value is a user-level + variable. 0 indicates an internal compiler temporary. + + In an insn, 1 means the insn has been deleted. + +`in_struct' + In `mem' expressions, it is 1 if the memory datum referred to is + all or part of a structure or array; 0 if it is (or might be) a + scalar variable. A reference through a C pointer has 0 because + the pointer might point to a scalar variable. This information + allows the compiler to determine something about possible cases of + aliasing. + + In an insn in the delay slot of a branch, 1 means that this insn + is from the target of the branch. + + During instruction scheduling, in an insn, 1 means that this insn + must be scheduled as part of a group together with the previous + insn. + + In `reg' expressions, it is 1 if the register has its entire life + contained within the test expression of some loop. + + In `subreg' expressions, 1 means that the `subreg' is accessing an + object that has had its mode promoted from a wider mode. + + In `label_ref' expressions, 1 means that the referenced label is + outside the innermost loop containing the insn in which the + `label_ref' was found. + + In `code_label' expressions, it is 1 if the label may never be + deleted. This is used for labels which are the target of + non-local gotos. + + In an RTL dump, this flag is represented as `/s'. + +`unchanging' + In `reg' and `mem' expressions, 1 means that the value of the + expression never changes. + + In `subreg' expressions, it is 1 if the `subreg' references an + unsigned object whose mode has been promoted to a wider mode. + + In an insn, 1 means that this is an annulling branch. + + In a `symbol_ref' expression, 1 means that this symbol addresses + something in the per-function constants pool. + + In a `call_insn', 1 means that this instruction is a call to a + const function. + + In an RTL dump, this flag is represented as `/u'. + +`integrated' + In some kinds of expressions, including insns, this flag means the + rtl was produced by procedure integration. + + In a `reg' expression, this flag indicates the register containing + the value to be returned by the current function. On machines + that pass parameters in registers, the same register number may be + used for parameters as well, but this flag is not set on such uses. - \ No newline at end of file