--- gcc/gcc.info-14 2018/04/24 17:51:20 1.1.1.1 +++ gcc/gcc.info-14 2018/04/24 18:17:47 1.1.1.7 @@ -1,1090 +1,1100 @@ -This is Info file gcc.info, produced by Makeinfo-1.43 from the input +This is Info file gcc.info, produced by Makeinfo-1.55 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 675 Massachusetts Avenue +Cambridge, MA 02139 USA - Permission is granted to make and distribute verbatim copies of -this manual provided the copyright notice and this permission notice -are preserved on all copies. + Copyright (C) 1988, 1989, 1992, 1993, 1994 Free Software Foundation, +Inc. + + Permission is granted to make and distribute verbatim copies of this +manual provided the copyright notice and this permission notice are +preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the section entitled "GNU General Public License" is included -exactly as in the original, and provided that the entire resulting -derived work is distributed under the terms of a permission notice -identical to this one. +that the sections entitled "GNU General Public License," "Funding for +Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are +included exactly as in the original, and provided that the entire +resulting derived work is distributed under the terms of a permission +notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified -versions, except that the section entitled "GNU General Public -License" and this permission notice may be included in translations -approved by the Free Software Foundation instead of in the original -English. +versions, except that the sections entitled "GNU General Public +License," "Funding for Free Software," and "Protect Your Freedom--Fight +`Look And Feel'", and this permission notice, may be included in +translations approved by the Free Software Foundation instead of in the +original English.  -File: gcc.info, Node: Trampolines, Next: Library Calls, Prev: Varargs, Up: Machine Macros +File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL -Trampolines for Nested Functions -================================ +Insns +===== - A "trampoline" is a small piece of code that is created at run time -when the address of a nested function is taken. It normally resides on -the stack, in the stack frame of the containing function. These macros -tell GNU CC how to generate code to allocate and initialize a -trampoline. - - The instructions in the trampoline must do two things: load a -constant address into the static chain register, and jump to the real -address of the nested function. On CISC machines such as the m68k, -this requires two instructions, a move immediate and a jump. Then the -two addresses exist in the trampoline as word-long immediate operands. - On RISC machines, it is often necessary to load each address into a -register in two parts. Then pieces of each address form separate -immediate operands. - - The code generated to initialize the trampoline must store the -variable parts--the static chain value and the function address--into -the immediate operands of the instructions. On a CISC machine, this is -simply a matter of copying each address to a memory reference at the -proper offset from the start of the trampoline. On a RISC machine, it -may be necessary to take out pieces of the address and store them -separately. - -`TRAMPOLINE_TEMPLATE (FILE)' - A C statement to output, on the stream FILE, assembler code for a - block of data that contains the constant parts of a trampoline. - This code should not include a label--the label is taken care of - automatically. - -`TRAMPOLINE_SIZE' - A C expression for the size in bytes of the trampoline, as an - integer. - -`TRAMPOLINE_ALIGNMENT' - Alignment required for trampolines, in bits. - - If you don't define this macro, the value of `BIGGEST_ALIGNMENT' - is used for aligning trampolines. - -`INITIALIZE_TRAMPOLINE (ADDR, FNADDR, STATIC_CHAIN)' - A C statement to initialize the variable parts of a trampoline. - ADDR is an RTX for the address of the trampoline; FNADDR is an - RTX for the address of the nested function; STATIC_CHAIN is an - RTX for the static chain value that should be passed to the - function when it is called. - -`ALLOCATE_TRAMPOLINE (FP)' - A C expression to allocate run-time space for a trampoline. The - expression value should be an RTX representing a memory reference - to the space for the trampoline. - - If this macro is not defined, by default the trampoline is - allocated as a stack slot. This default is right for most - machines. The exceptions are machines where it is impossible to - execute instructions in the stack area. On such machines, you - may have to implement a separate stack, using this macro in - conjunction with `FUNCTION_PROLOGUE' and `FUNCTION_EPILOGUE'. - - FP points to a data structure, a `struct function', which - describes the compilation status of the immediate containing - function of the function which the trampoline is for. Normally - (when `ALLOCATE_TRAMPOLINE' is not defined), the stack slot for - the trampoline is in the stack frame of this containing function. - Other allocation strategies probably must do something analogous - with this information. - - Implementing trampolines is difficult on many machines because they -have separate instruction and data caches. Writing into a stack -location fails to clear the memory in the instruction cache, so when -the program jumps to that location, it executes the old contents. - - Here are two possible solutions. One is to clear the relevant -parts of the instruction cache whenever a trampoline is set up. The -other is to make all trampolines identical, by having them jump to a -standard subroutine. The former technique makes trampoline execution -faster; the latter makes initialization faster. - - To clear the instruction cache when a trampoline is initialized, -define the following macros which describe the shape of the cache. - -`INSN_CACHE_SIZE' - The total size in bytes of the cache. - -`INSN_CACHE_LINE_WIDTH' - The length in bytes of each cache line. The cache is divided - into cache lines which are disjoint slots, each holding a - contiguous chunk of data fetched from memory. Each time data is - brought into the cache, an entire line is read at once. The data - loaded into a cache line is always aligned on a boundary equal to - the line size. - -`INSN_CACHE_DEPTH' - The number of alternative cache lines that can hold any - particular memory location. - - To use a standard subroutine, define the following macro. In -addition, you must make sure that the instructions in a trampoline -fill an entire cache line with identical instructions, or else ensure -that the beginning of the trampoline code is always aligned at the -same point in its cache line. Look in `m68k.h' as a guide. - -`TRANSFER_FROM_TRAMPOLINE' - Define this macro if trampolines need a special subroutine to do - their work. The macro should expand to a series of `asm' - statements which will be compiled with GNU CC. They go in a - library function named `__transfer_from_trampoline'. - - If you need to avoid executing the ordinary prologue code of a - compiled C function when you jump to the subroutine, you can do - so by placing a special label of your own in the assembler code. - Use one `asm' statement to generate an assembler label, and - another to make the label global. Then trampolines can use that - label to jump directly to your special assembler code. + The RTL representation of the code for a function is a doubly-linked +chain of objects called "insns". Insns are expressions with special +codes that are used for no other purpose. Some insns are actual +instructions; others represent dispatch tables for `switch' statements; +others represent labels to jump to or various sorts of declarative +information. + + In addition to its own specific data, each insn must have a unique +id-number that distinguishes it from all other insns in the current +function (after delayed branch scheduling, copies of an insn with the +same id-number may be present in multiple places in a function, but +these copies will always be identical and will only appear inside a +`sequence'), and chain pointers to the preceding and following insns. +These three fields occupy the same position in every insn, independent +of the expression code of the insn. They could be accessed with `XEXP' +and `XINT', but instead three special macros are always used: + +`INSN_UID (I)' + Accesses the unique id of insn I. + +`PREV_INSN (I)' + Accesses the chain pointer to the insn preceding I. If I is the + first insn, this is a null pointer. + +`NEXT_INSN (I)' + Accesses the chain pointer to the insn following I. If I is the + last insn, this is a null pointer. + + The first insn in the chain is obtained by calling `get_insns'; the +last insn is the result of calling `get_last_insn'. Within the chain +delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must +always correspond: if INSN is not the first insn, + + NEXT_INSN (PREV_INSN (INSN)) == INSN + +is always true and if INSN is not the last insn, + + PREV_INSN (NEXT_INSN (INSN)) == INSN + +is always true. + + After delay slot scheduling, some of the insns in the chain might be +`sequence' expressions, which contain a vector of insns. The value of +`NEXT_INSN' in all but the last of these insns is the next insn in the +vector; the value of `NEXT_INSN' of the last insn in the vector is the +same as the value of `NEXT_INSN' for the `sequence' in which it is +contained. Similar rules apply for `PREV_INSN'. + + This means that the above invariants are not necessarily true for +insns inside `sequence' expressions. Specifically, if INSN is the +first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn +containing the `sequence' expression, as is the value of `PREV_INSN +(NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' +expression. You can use these expressions to find the containing +`sequence' expression. + + Every insn has one of the following six expression codes: + +`insn' + The expression code `insn' is used for instructions that do not + jump and do not do function calls. `sequence' expressions are + always contained in insns with code `insn' even if one of those + insns should jump or do function calls. + + Insns with code `insn' have four additional fields beyond the three + mandatory ones listed above. These four are described in a table + below. + +`jump_insn' + The expression code `jump_insn' is used for instructions that may + jump (or, more generally, may contain `label_ref' expressions). If + there is an instruction to return from the current function, it is + recorded as a `jump_insn'. + + `jump_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contain a field + `JUMP_LABEL' which is defined once jump optimization has completed. + + For simple conditional and unconditional jumps, this field + contains the `code_label' to which this insn will (possibly + conditionally) branch. In a more complex jump, `JUMP_LABEL' + records one of the labels that the insn refers to; the only way to + find the others is to scan the entire body of the insn. + + Return insns count as jumps, but since they do not refer to any + labels, they have zero in the `JUMP_LABEL' field. + +`call_insn' + The expression code `call_insn' is used for instructions that may + do function calls. It is important to distinguish these + instructions because they imply that certain registers and memory + locations may be altered unpredictably. + + `call_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contain a field + `CALL_INSN_FUNCTION_USAGE', which contains a list (chain of + `expr_list' expressions) containing `use' and `clobber' + expressions that denote hard registers used or clobbered by the + called function. A register specified in a `clobber' in this list + is modified *after* the execution of the `call_insn', while a + register in a `clobber' in the body of the `call_insn' is + clobbered before the insn completes execution. `clobber' + expressions in this list augment registers specified in + `CALL_USED_REGISTERS' (*note Register Basics::.). + +`code_label' + A `code_label' insn represents a label that a jump insn can jump + to. It contains two special fields of data in addition to the + three standard ones. `CODE_LABEL_NUMBER' is used to hold the + "label number", a number that identifies this label uniquely among + all the labels in the compilation (not just in the current + function). Ultimately, the label is represented in the assembler + output as an assembler label, usually of the form `LN' where N is + the label number. + + When a `code_label' appears in an RTL expression, it normally + appears within a `label_ref' which represents the address of the + label, as a number. + + The field `LABEL_NUSES' is only defined once the jump optimization + phase is completed and contains the number of times this label is + referenced in the current function. + +`barrier' + Barriers are placed in the instruction stream when control cannot + flow past them. They are placed after unconditional jump + instructions to indicate that the jumps are unconditional and + after calls to `volatile' functions, which do not return (e.g., + `exit'). They contain no information beyond the three standard + fields. + +`note' + `note' insns are used to represent additional debugging and + declarative information. They contain two nonstandard fields, an + integer which is accessed with the macro `NOTE_LINE_NUMBER' and a + string accessed with `NOTE_SOURCE_FILE'. + + If `NOTE_LINE_NUMBER' is positive, the note represents the + position of a source line and `NOTE_SOURCE_FILE' is the source + file name that the line came from. These notes control generation + of line number data in the assembler output. + + Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a + code with one of the following values (and `NOTE_SOURCE_FILE' must + contain a null pointer): + + `NOTE_INSN_DELETED' + Such a note is completely ignorable. Some passes of the + compiler delete insns by altering them into notes of this + kind. + + `NOTE_INSN_BLOCK_BEG' + `NOTE_INSN_BLOCK_END' + These types of notes indicate the position of the beginning + and end of a level of scoping of variable names. They + control the output of debugging information. + + `NOTE_INSN_LOOP_BEG' + `NOTE_INSN_LOOP_END' + These types of notes indicate the position of the beginning + and end of a `while' or `for' loop. They enable the loop + optimizer to find loops quickly. + + `NOTE_INSN_LOOP_CONT' + Appears at the place in a loop that `continue' statements + jump to. + + `NOTE_INSN_LOOP_VTOP' + This note indicates the place in a loop where the exit test + begins for those loops in which the exit test has been + duplicated. This position becomes another virtual start of + the loop when considering loop invariants. + + `NOTE_INSN_FUNCTION_END' + Appears near the end of the function body, just before the + label that `return' statements jump to (on machine where a + single instruction does not suffice for returning). This + note may be deleted by jump optimization. + + `NOTE_INSN_SETJMP' + Appears following each call to `setjmp' or a related function. + + These codes are printed symbolically when they appear in debugging + dumps. + + The machine mode of an insn is normally `VOIDmode', but some phases +use the mode for various purposes; for example, the reload pass sets it +to `HImode' if the insn needs reloading but not register elimination +and `QImode' if both are required. The common subexpression +elimination pass sets the mode of an insn to `QImode' when it is the +first insn in a block that has already been processed. + + Here is a table of the extra fields of `insn', `jump_insn' and +`call_insn' insns: + +`PATTERN (I)' + An expression for the side effect performed by this insn. This + must be one of the following codes: `set', `call', `use', + `clobber', `return', `asm_input', `asm_output', `addr_vec', + `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', + `parallel', or `sequence'. If it is a `parallel', each element of + the `parallel' must be one these codes, except that `parallel' + expressions cannot be nested and `addr_vec' and `addr_diff_vec' + are not permitted inside a `parallel' expression. + +`INSN_CODE (I)' + An integer that says which pattern in the machine description + matches this insn, or -1 if the matching has not yet been + attempted. + + Such matching is never attempted and this field remains -1 on an + insn whose pattern consists of a single `use', `clobber', + `asm_input', `addr_vec' or `addr_diff_vec' expression. + + Matching is also never attempted on insns that result from an `asm' + statement. These contain at least one `asm_operands' expression. + The function `asm_noperands' returns a non-negative value for such + insns. + + In the debugging output, this field is printed as a number + followed by a symbolic representation that locates the pattern in + the `md' file as some small positive or negative offset from a + named pattern. + +`LOG_LINKS (I)' + A list (chain of `insn_list' expressions) giving information about + dependencies between instructions within a basic block. Neither a + jump nor a label may come between the related insns. + +`REG_NOTES (I)' + A list (chain of `expr_list' and `insn_list' expressions) giving + miscellaneous information about the insn. It is often information + pertaining to the registers used in this insn. + + The `LOG_LINKS' field of an insn is a chain of `insn_list' +expressions. Each of these has two operands: the first is an insn, and +the second is another `insn_list' expression (the next one in the +chain). The last `insn_list' in the chain has a null pointer as second +operand. The significant thing about the chain is which insns appear +in it (as first operands of `insn_list' expressions). Their order is +not significant. + + This list is originally set up by the flow analysis pass; it is a +null pointer until then. Flow only adds links for those data +dependencies which can be used for instruction combination. For each +insn, the flow analysis pass adds a link to insns which store into +registers values that are used for the first time in this insn. The +instruction scheduling pass adds extra links so that every dependence +will be represented. Links represent data dependencies, +antidependencies and output dependencies; the machine mode of the link +distinguishes these three types: antidependencies have mode +`REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and +data dependencies have mode `VOIDmode'. + + The `REG_NOTES' field of an insn is a chain similar to the +`LOG_LINKS' field but it includes `expr_list' expressions in addition +to `insn_list' expressions. There are several kinds of register notes, +which are distinguished by the machine mode, which in a register note +is really understood as being an `enum reg_note'. The first operand OP +of the note is data whose meaning depends on the kind of note. + + The macro `REG_NOTE_KIND (X)' returns the kind of register note. +Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the +register note type of X to be NEWKIND. + + Register notes are of three classes: They may say something about an +input to an insn, they may say something about an output of an insn, or +they may create a linkage between two insns. There are also a set of +values that are only used in `LOG_LINKS'. + + These register notes annotate inputs to an insn: + +`REG_DEAD' + The value in OP dies in this insn; that is to say, altering the + value immediately after this insn would not affect the future + behavior of the program. + + This does not necessarily mean that the register OP has no useful + value after this insn since it may also be an output of the insn. + In such a case, however, a `REG_DEAD' note would be redundant and + is usually not present until after the reload pass, but no code + relies on this fact. + +`REG_INC' + The register OP is incremented (or decremented; at this level + there is no distinction) by an embedded side effect inside this + insn. This means it appears in a `post_inc', `pre_inc', + `post_dec' or `pre_dec' expression. + +`REG_NONNEG' + The register OP is known to have a nonnegative value when this + insn is reached. This is used so that decrement and branch until + zero instructions, such as the m68k dbra, can be matched. + + The `REG_NONNEG' note is added to insns only if the machine + description has a `decrement_and_branch_until_zero' pattern. + +`REG_NO_CONFLICT' + This insn does not cause a conflict between OP and the item being + set by this insn even though it might appear that it does. In + other words, if the destination register and OP could otherwise be + assigned the same register, this insn does not prevent that + assignment. + + Insns with this note are usually part of a block that begins with a + `clobber' insn specifying a multi-word pseudo register (which will + be the output of the block), a group of insns that each set one + word of the value and have the `REG_NO_CONFLICT' note attached, + and a final insn that copies the output to itself with an attached + `REG_EQUAL' note giving the expression being computed. This block + is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the + first and last insns, respectively. + +`REG_LABEL' + This insn uses OP, a `code_label', but is not a `jump_insn'. The + presence of this note allows jump optimization to be aware that OP + is, in fact, being used. + + The following notes describe attributes of outputs of an insn: + +`REG_EQUIV' +`REG_EQUAL' + This note is only valid on an insn that sets only one register and + indicates that that register will be equal to OP at run time; the + scope of this equivalence differs between the two types of notes. + The value which the insn explicitly copies into the register may + look different from OP, but they will be equal at run time. If the + output of the single `set' is a `strict_low_part' expression, the + note refers to the register that is contained in `SUBREG_REG' of + the `subreg' expression. + + For `REG_EQUIV', the register is equivalent to OP throughout the + entire function, and could validly be replaced in all its + occurrences by OP. ("Validly" here refers to the data flow of the + program; simple replacement may make some insns invalid.) For + example, when a constant is loaded into a register that is never + assigned any other value, this kind of note is used. + + When a parameter is copied into a pseudo-register at entry to a + function, a note of this kind records that the register is + equivalent to the stack slot where the parameter was passed. + Although in this case the register may be set by other insns, it + is still valid to replace the register by the stack slot + throughout the function. + + In the case of `REG_EQUAL', the register that is set by this insn + will be equal to OP at run time at the end of this insn but not + necessarily elsewhere in the function. In this case, OP is + typically an arithmetic expression. For example, when a sequence + of insns such as a library call is used to perform an arithmetic + operation, this kind of note is attached to the insn that produces + or copies the final value. + + These two notes are used in different ways by the compiler passes. + `REG_EQUAL' is used by passes prior to register allocation (such as + common subexpression elimination and loop optimization) to tell + them how to think of that value. `REG_EQUIV' notes are used by + register allocation to indicate that there is an available + substitute expression (either a constant or a `mem' expression for + the location of a parameter on the stack) that may be used in + place of a register if insufficient registers are available. + + Except for stack homes for parameters, which are indicated by a + `REG_EQUIV' note and are not useful to the early optimization + passes and pseudo registers that are equivalent to a memory + location throughout there entire life, which is not detected until + later in the compilation, all equivalences are initially indicated + by an attached `REG_EQUAL' note. In the early stages of register + allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note + if OP is a constant and the insn represents the only set of its + destination register. + + Thus, compiler passes prior to register allocation need only check + for `REG_EQUAL' notes and passes subsequent to register allocation + need only check for `REG_EQUIV' notes. + +`REG_UNUSED' + The register OP being set by this insn will not be used in a + subsequent insn. This differs from a `REG_DEAD' note, which + indicates that the value in an input will not be used subsequently. + These two notes are independent; both may be present for the same + register. + +`REG_WAS_0' + The single output of this insn contained zero before this insn. + OP is the insn that set it to zero. You can rely on this note if + it is present and OP has not been deleted or turned into a `note'; + its absence implies nothing. + + These notes describe linkages between insns. They occur in pairs: +one insn has one of a pair of notes that points to a second insn, which +has the inverse note pointing back to the first insn. + +`REG_RETVAL' + This insn copies the value of a multi-insn sequence (for example, a + library call), and OP is the first insn of the sequence (for a + library call, the first insn that was generated to set up the + arguments for the library call). + + Loop optimization uses this note to treat such a sequence as a + single operation for code motion purposes and flow analysis uses + this note to delete such sequences whose results are dead. + + A `REG_EQUAL' note will also usually be attached to this insn to + provide the expression being computed by the sequence. + +`REG_LIBCALL' + This is the inverse of `REG_RETVAL': it is placed on the first + insn of a multi-insn sequence, and it points to the last one. + +`REG_CC_SETTER' +`REG_CC_USER' + On machines that use `cc0', the insns which set and use `cc0' set + and use `cc0' are adjacent. However, when branch delay slot + filling is done, this may no longer be true. In this case a + `REG_CC_USER' note will be placed on the insn setting `cc0' to + point to the insn using `cc0' and a `REG_CC_SETTER' note will be + placed on the insn using `cc0' to point to the insn setting `cc0'. + + These values are only used in the `LOG_LINKS' field, and indicate +the type of dependency that each link represents. Links which indicate +a data dependence (a read after write dependence) do not use any code, +they simply have mode `VOIDmode', and are printed without any +descriptive text. + +`REG_DEP_ANTI' + This indicates an anti dependence (a write after read dependence). + +`REG_DEP_OUTPUT' + This indicates an output dependence (a write after write + dependence). + + For convenience, the machine mode in an `insn_list' or `expr_list' +is printed using these symbolic codes in debugging dumps. + + The only difference between the expression codes `insn_list' and +`expr_list' is that the first operand of an `insn_list' is assumed to +be an insn and is printed in debugging dumps as the insn's unique id; +the first operand of an `expr_list' is printed in the ordinary way as +an expression.  -File: gcc.info, Node: Library Calls, Next: Addressing Modes, Prev: Trampolines, Up: Machine Macros +File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL -Implicit Calls to Library Routines -================================== +RTL Representation of Function-Call Insns +========================================= -`MULSI3_LIBCALL' - A C string constant giving the name of the function to call for - multiplication of one signed full-word by another. If you do not - define this macro, the default name is used, which is `__mulsi3', - a function defined in `libgcc.a'. - -`DIVSI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one signed full-word by another. If you do not define - this macro, the default name is used, which is `__divsi3', a - function defined in `libgcc.a'. - -`UDIVSI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one unsigned full-word by another. If you do not - define this macro, the default name is used, which is - `__udivsi3', a function defined in `libgcc.a'. - -`MODSI3_LIBCALL' - A C string constant giving the name of the function to call for - the remainder in division of one signed full-word by another. If - you do not define this macro, the default name is used, which is - `__modsi3', a function defined in `libgcc.a'. - -`UMODSI3_LIBCALL' - A C string constant giving the name of the function to call for - the remainder in division of one unsigned full-word by another. - If you do not define this macro, the default name is used, which - is `__umodsi3', a function defined in `libgcc.a'. - -`MULDI3_LIBCALL' - A C string constant giving the name of the function to call for - multiplication of one signed double-word by another. If you do - not define this macro, the default name is used, which is - `__muldi3', a function defined in `libgcc.a'. - -`DIVDI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one signed double-word by another. If you do not - define this macro, the default name is used, which is `__divdi3', - a function defined in `libgcc.a'. - -`UDIVDI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one unsigned full-word by another. If you do not - define this macro, the default name is used, which is - `__udivdi3', a function defined in `libgcc.a'. - -`MODDI3_LIBCALL' - A C string constant giving the name of the function to call for - the remainder in division of one signed double-word by another. - If you do not define this macro, the default name is used, which - is `__moddi3', a function defined in `libgcc.a'. - -`UMODDI3_LIBCALL' - A C string constant giving the name of the function to call for - the remainder in division of one unsigned full-word by another. - If you do not define this macro, the default name is used, which - is `__umoddi3', a function defined in `libgcc.a'. - -`TARGET_MEM_FUNCTIONS' - Define this macro if GNU CC should generate calls to the System V - (and ANSI C) library functions `memcpy' and `memset' rather than - the BSD functions `bcopy' and `bzero'. - -`LIBGCC_NEEDS_DOUBLE' - Define this macro if only `float' arguments cannot be passed to - library routines (so they must be converted to `double'). This - macro affects both how library calls are generated and how the - library routines in `libgcc1.c' accept their arguments. It is - useful on machines where floating and fixed point arguments are - passed differently, such as the i860. - -`FLOAT_ARG_TYPE' - Define this macro to override the type used by the library - routines to pick up arguments of type `float'. (By default, they - use a union of `float' and `int'.) - - The obvious choice would be `float'--but that won't work with - traditional C compilers that expect all arguments declared as - `float' to arrive as `double'. To avoid this conversion, the - library routines ask for the value as some other type and then - treat it as a `float'. - - On some systems, no other type will work for this. For these - systems, you must use `LIBGCC_NEEDS_DOUBLE' instead, to force - conversion of the values `double' before they are passed. - -`FLOATIFY (PASSED-VALUE)' - Define this macro to override the way library routines - redesignate a `float' argument as a `float' instead of the type - it was passed as. The default is an expression which takes the - `float' field of the union. - -`FLOAT_VALUE_TYPE' - Define this macro to override the type used by the library - routines to return values that ought to have type `float'. (By - default, they use `int'.) - - The obvious choice would be `float'--but that won't work with - traditional C compilers gratuitously convert values declared as - `float' into `double'. - -`INTIFY (FLOAT-VALUE)' - Define this macro to override the way the value of a - `float'-returning library routine should be packaged in order to - return it. These functions are actually declared to return type - `FLOAT_VALUE_TYPE' (normally `int'). - - These values can't be returned as type `float' because traditional - C compilers would gratuitously convert the value to a `double'. - - A local variable named `intify' is always available when the macro - `INTIFY' is used. It is a union of a `float' field named `f' and - a field named `i' whose type is `FLOAT_VALUE_TYPE' or `int'. - - If you don't define this macro, the default definition works by - copying the value through that union. - -`SItype' - Define this macro as the name of the data type corresponding to - `SImode' in the system's own C compiler. - - You need not define this macro if that type is `int', as it - usually is. - -`perform_...' - Define these macros to supply explicit C statements to carry out - various arithmetic operations on types `float' and `double' in the - library routines in `libgcc1.c'. See that file for a full list - of these macros and their arguments. - - On most machines, you don't need to define any of these macros, - because the C compiler that comes with the system takes care of - doing them. - -`NEXT_OBJC_RUNTIME' - Define this macro to generate code for Objective C message - sending using the calling convention of the NeXT system. This - calling convention involves passing the object, the selector and - the method arguments all at once to the method-lookup library - function. - - The default calling convention passes just the object and the - selector to the lookup function, which returns a pointer to the - method. + Insns that call subroutines have the RTL expression code `call_insn'. +These insns must satisfy special rules, and their bodies must use a +special RTL expression code, `call'. + + A `call' expression has two operands, as follows: + + (call (mem:FM ADDR) NBYTES) + +Here NBYTES is an operand that represents the number of bytes of +argument data being passed to the subroutine, FM is a machine mode +(which must equal as the definition of the `FUNCTION_MODE' macro in the +machine description) and ADDR represents the address of the subroutine. + + For a subroutine that returns no value, the `call' expression as +shown above is the entire body of the insn, except that the insn might +also contain `use' or `clobber' expressions. + + For a subroutine that returns a value whose mode is not `BLKmode', +the value is returned in a hard register. If this register's number is +R, then the body of the call insn looks like this: + + (set (reg:M R) + (call (mem:FM ADDR) NBYTES)) + +This RTL expression makes it clear (to the optimizer passes) that the +appropriate register receives a useful value in this insn. + + When a subroutine returns a `BLKmode' value, it is handled by +passing to the subroutine the address of a place to store the value. +So the call insn itself does not "return" any value, and it has the +same RTL form as a call that returns nothing. + + On some machines, the call instruction itself clobbers some register, +for example to contain the return address. `call_insn' insns on these +machines should have a body which is a `parallel' that contains both +the `call' expression and `clobber' expressions that indicate which +registers are destroyed. Similarly, if the call instruction requires +some register other than the stack pointer that is not explicitly +mentioned it its RTL, a `use' subexpression should mention that +register. + + Functions that are called are assumed to modify all registers listed +in the configuration macro `CALL_USED_REGISTERS' (*note Register +Basics::.) and, with the exception of `const' functions and library +calls, to modify all of memory. + + Insns containing just `use' expressions directly precede the +`call_insn' insn to indicate which registers contain inputs to the +function. Similarly, if registers other than those in +`CALL_USED_REGISTERS' are clobbered by the called function, insns +containing a single `clobber' follow immediately after the call to +indicate which registers.  -File: gcc.info, Node: Addressing Modes, Next: Condition Code, Prev: Library Calls, Up: Machine Macros +File: gcc.info, Node: Sharing, Next: Reading RTL, Prev: Calls, Up: RTL -Addressing Modes -================ +Structure Sharing Assumptions +============================= -`HAVE_POST_INCREMENT' - Define this macro if the machine supports post-increment - addressing. - -`HAVE_PRE_INCREMENT' -`HAVE_POST_DECREMENT' -`HAVE_PRE_DECREMENT' - Similar for other kinds of addressing. - -`CONSTANT_ADDRESS_P (X)' - A C expression that is 1 if the RTX X is a constant which is a - valid address. On most machines, this can be defined as - `CONSTANT_P (X)', but a few machines are more restrictive in - which constant addresses are supported. - - `CONSTANT_P' accepts integer-values expressions whose values are - not explicitly known, such as `symbol_ref', `label_ref', and - `high' expressions and `const' arithmetic expressions, in - addition to `const_int' and `const_double' expressions. - -`MAX_REGS_PER_ADDRESS' - A number, the maximum number of registers that can appear in a - valid memory address. Note that it is up to you to specify a - value equal to the maximum number that `GO_IF_LEGITIMATE_ADDRESS' - would ever accept. - -`GO_IF_LEGITIMATE_ADDRESS (MODE, X, LABEL)' - A C compound statement with a conditional `goto LABEL;' executed - if X (an RTX) is a legitimate memory address on the target - machine for a memory operand of mode MODE. - - It usually pays to define several simpler macros to serve as - subroutines for this one. Otherwise it may be too complicated to - understand. - - This macro must exist in two variants: a strict variant and a - non-strict one. The strict variant is used in the reload pass. - It must be defined so that any pseudo-register that has not been - allocated a hard register is considered a memory reference. In - contexts where some kind of register is required, a - pseudo-register with no hard register must be rejected. - - The non-strict variant is used in other passes. It must be - defined to accept all pseudo-registers in every context where - some kind of register is required. - - Compiler source files that want to use the strict variant of this - macro define the macro `REG_OK_STRICT'. You should use an - `#ifdef REG_OK_STRICT' conditional to define the strict variant - in that case and the non-strict variant otherwise. - - Typically among the subroutines used to define - `GO_IF_LEGITIMATE_ADDRESS' are subroutines to check for - acceptable registers for various purposes (one for base - registers, one for index registers, and so on). Then only these - subroutine macros need have two variants; the higher levels of - macros may be the same whether strict or not. - - Normally, constant addresses which are the sum of a `symbol_ref' - and an integer are stored inside a `const' RTX to mark them as - constant. Therefore, there is no need to recognize such sums - specifically as legitimate addresses. Normally you would simply - recognize any `const' as legitimate. - - Usually `PRINT_OPERAND_ADDRESS' is not prepared to handle constant - sums that are not marked with `const'. It assumes that a naked - `plus' indicates indexing. If so, then you *must* reject such - naked constant sums as illegitimate addresses, so that none of - them will be given to `PRINT_OPERAND_ADDRESS'. - - On some machines, whether a symbolic address is legitimate - depends on the section that the address refers to. On these - machines, define the macro `ENCODE_SECTION_INFO' to store the - information into the `symbol_ref', and then check for it here. - When you see a `const', you will have to look inside it to find - the `symbol_ref' in order to determine the section. *Note - Assembler Format::. - - The best way to modify the name string is by adding text to the - beginning, with suitable punctuation to prevent any ambiguity. - Allocate the new name in `saveable_obstack'. You will have to - modify `ASM_OUTPUT_LABELREF' to remove and decode the added text - and output the name accordingly. - - You can check the information stored here into the `symbol_ref' in - the definitions of `GO_IF_LEGITIMATE_ADDRESS' and - `PRINT_OPERAND_ADDRESS'. - -`REG_OK_FOR_BASE_P (X)' - A C expression that is nonzero if X (assumed to be a `reg' RTX) - is valid for use as a base register. For hard registers, it - should always accept those which the hardware permits and reject - the others. Whether the macro accepts or rejects pseudo - registers must be controlled by `REG_OK_STRICT' as described - above. This usually requires two variant definitions, of which - `REG_OK_STRICT' controls the one actually used. - -`REG_OK_FOR_INDEX_P (X)' - A C expression that is nonzero if X (assumed to be a `reg' RTX) - is valid for use as an index register. - - The difference between an index register and a base register is - that the index register may be scaled. If an address involves - the sum of two registers, neither one of them scaled, then either - one may be labeled the "base" and the other the "index"; but - whichever labeling is used must fit the machine's constraints of - which registers may serve in each capacity. The compiler will - try both labelings, looking for one that is valid, and will - reload one or both registers only if neither labeling works. - -`LEGITIMIZE_ADDRESS (X, OLDX, MODE, WIN)' - A C compound statement that attempts to replace X with a valid - memory address for an operand of mode MODE. WIN will be a C - statement label elsewhere in the code; the macro definition may - use - - GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN); - - to avoid further processing if the address has become legitimate. - - X will always be the result of a call to `break_out_memory_refs', - and OLDX will be the operand that was given to that function to - produce X. - - The code generated by this macro should not alter the - substructure of X. If it transforms X into a more legitimate - form, it should assign X (which will always be a C variable) a - new value. - - It is not necessary for this macro to come up with a legitimate - address. The compiler has standard ways of doing so in all - cases. In fact, it is safe for this macro to do nothing. But - often a machine-dependent strategy can generate better code. - -`GO_IF_MODE_DEPENDENT_ADDRESS (ADDR, LABEL)' - A C statement or compound statement with a conditional `goto - LABEL;' executed if memory address X (an RTX) can have different - meanings depending on the machine mode of the memory reference it - is used for. - - Autoincrement and autodecrement addresses typically have - mode-dependent effects because the amount of the increment or - decrement is the size of the operand being addressed. Some - machines have other mode-dependent addresses. Many RISC machines - have no mode-dependent addresses. - - You may assume that ADDR is a valid address for the machine. - -`LEGITIMATE_CONSTANT_P (X)' - A C expression that is nonzero if X is a legitimate constant for - an immediate operand on the target machine. You can assume that - X satisfies `CONSTANT_P', so you need not check this. In fact, - `1' is a suitable definition for this macro on machines where - anything `CONSTANT_P' is valid. - -`LEGITIMATE_PIC_OPERAND_P (X)' - A C expression that is nonzero if X is a legitimate immediate - operand on the target machine when generating position - independent code. You can assume that X satisfies `CONSTANT_P', - so you need not check this. You can also assume FLAG_PIC is - true, so you need not check it either. You need not define this - macro if all constants (including `SYMBOL_REF') can be immediate - operands when generating position independent code. + The compiler assumes that certain kinds of RTL expressions are +unique; there do not exist two distinct objects representing the same +value. In other cases, it makes an opposite assumption: that no RTL +expression object of a certain kind appears in more than one place in +the containing structure. + + These assumptions refer to a single function; except for the RTL +objects that describe global variables and external functions, and a +few standard objects such as small integer constants, no RTL objects +are common to two functions. + + * Each pseudo-register has only a single `reg' object to represent + it, and therefore only a single machine mode. + + * For any symbolic label, there is only one `symbol_ref' object + referring to it. + + * There is only one `const_int' expression with value 0, only one + with value 1, and only one with value -1. Some other integer + values are also stored uniquely. + + * There is only one `pc' expression. + + * There is only one `cc0' expression. + + * There is only one `const_double' expression with value 0 for each + floating point mode. Likewise for values 1 and 2. + + * No `label_ref' or `scratch' appears in more than one place in the + RTL structure; in other words, it is safe to do a tree-walk of all + the insns in the function and assume that each time a `label_ref' + or `scratch' is seen it is distinct from all others that are seen. + + * Only one `mem' object is normally created for each static variable + or stack slot, so these objects are frequently shared in all the + places they appear. However, separate but equal objects for these + variables are occasionally made. + + * When a single `asm' statement has multiple output operands, a + distinct `asm_operands' expression is made for each output operand. + However, these all share the vector which contains the sequence of + input operands. This sharing is used later on to test whether two + `asm_operands' expressions come from the same statement, so all + optimizations must carefully preserve the sharing if they copy the + vector at all. + + * No RTL object appears in more than one place in the RTL structure + except as described above. Many passes of the compiler rely on + this by assuming that they can modify RTL objects in place without + unwanted side-effects on other insns. + + * During initial RTL generation, shared structure is freely + introduced. After all the RTL for a function has been generated, + all shared structure is copied by `unshare_all_rtl' in + `emit-rtl.c', after which the above rules are guaranteed to be + followed. + + * During the combiner pass, shared structure within an insn can exist + temporarily. However, the shared structure is copied before the + combiner is finished with the insn. This is done by calling + `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'.  -File: gcc.info, Node: Condition Code, Next: Costs, Prev: Addressing Modes, Up: Machine Macros +File: gcc.info, Node: Reading RTL, Prev: Sharing, Up: RTL + +Reading RTL +=========== + + To read an RTL object from a file, call `read_rtx'. It takes one +argument, a stdio stream, and returns a single RTL object. -Condition Code Status -===================== + Reading RTL from a file is very slow. This is no currently not a +problem because reading RTL occurs only as part of building the +compiler. - The file `conditions.h' defines a variable `cc_status' to describe -how the condition code was computed (in case the interpretation of the -condition code depends on the instruction that it was set by). This -variable contains the RTL expressions on which the condition code is -currently based, and several standard flags. - - Sometimes additional machine-specific flags must be defined in the -machine description header file. It can also add additional -machine-specific information by defining `CC_STATUS_MDEP'. - -`CC_STATUS_MDEP' - C code for a data type which is used for declaring the `mdep' - component of `cc_status'. It defaults to `int'. - - This macro is not used on machines that do not use `cc0'. - -`CC_STATUS_MDEP_INIT' - A C expression to initialize the `mdep' field to "empty". The - default definition does nothing, since most machines don't use - the field anyway. If you want to use the field, you should - probably define this macro to initialize it. - - This macro is not used on machines that do not use `cc0'. - -`NOTICE_UPDATE_CC (EXP, INSN)' - A C compound statement to set the components of `cc_status' - appropriately for an insn INSN whose body is EXP. It is this - macro's responsibility to recognize insns that set the condition - code as a byproduct of other activity as well as those that - explicitly set `(cc0)'. - - This macro is not used on machines that do not use `cc0'. - - If there are insns that do not set the condition code but do alter - other machine registers, this macro must check to see whether they - invalidate the expressions that the condition code is recorded as - reflecting. For example, on the 68000, insns that store in - address registers do not set the condition code, which means that - usually `NOTICE_UPDATE_CC' can leave `cc_status' unaltered for - such insns. But suppose that the previous insn set the condition - code based on location `a4@(102)' and the current insn stores a - new value in `a4'. Although the condition code is not changed by - this, it will no longer be true that it reflects the contents of - `a4@(102)'. Therefore, `NOTICE_UPDATE_CC' must alter `cc_status' - in this case to say that nothing is known about the condition - code value. - - The definition of `NOTICE_UPDATE_CC' must be prepared to deal - with the results of peephole optimization: insns whose patterns - are `parallel' RTXs containing various `reg', `mem' or constants - which are just the operands. The RTL structure of these insns is - not sufficient to indicate what the insns actually do. What - `NOTICE_UPDATE_CC' should do when it sees one is just to run - `CC_STATUS_INIT'. - - A possible definition of `NOTICE_UPDATE_CC' is to call a function - that looks at an attribute (*note Insn Attributes::.) named, for - example, `cc'. This avoids having detailed information about - patterns in two places, the `md' file and in `NOTICE_UPDATE_CC'. - -`EXTRA_CC_MODES' - A list of names to be used for additional modes for condition code - values in registers (*note Jump Patterns::.). These names are - added to `enum machine_mode' and all have class `MODE_CC'. By - convention, they should start with `CC' and end with `mode'. - - You should only define this macro if your machine does not use - `cc0' and only if additional modes are required. - -`EXTRA_CC_NAMES' - A list of C strings giving the names for the modes listed in - `EXTRA_CC_MODES'. For example, the Sparc defines this macro and - `EXTRA_CC_MODES' as - - #define EXTRA_CC_MODES CC_NOOVmode, CCFPmode - #define EXTRA_CC_NAMES "CC_NOOV", "CCFP" - - This macro is not required if `EXTRA_CC_MODES' is not defined. - -`SELECT_CC_MODE (OP, X)' - Returns a mode from class `MODE_CC' to be used when comparison - operation code OP is applied to rtx X. For example, on the Sparc, - `SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a - description of the reason for this definition) - - #define SELECT_CC_MODE(OP,X) \ - (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT ? CCFPmode \ - : (GET_CODE (X) == PLUS || GET_CODE (X) == MINUS \ - || GET_CODE (X) == NEG) \ - ? CC_NOOVmode : CCmode) + People frequently have the idea of using RTL stored as text in a +file as an interface between a language front end and the bulk of GNU +CC. This idea is not feasible. - This macro is not required if `EXTRA_CC_MODES' is not defined. + GNU CC was designed to use RTL internally only. Correct RTL for a +given program is very dependent on the particular target machine. And +the RTL does not contain all the information about the program. + + The proper way to interface GNU CC to a new language front end is +with the "tree" data structure. There is no manual for this data +structure, but it is described in the files `tree.h' and `tree.def'.  -File: gcc.info, Node: Costs, Next: Sections, Prev: Condition Code, Up: Machine Macros +File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top -Describing Relative Costs of Operations -======================================= +Machine Descriptions +******************** - These macros let you describe the relative speed of various -operations on the target machine. + A machine description has two parts: a file of instruction patterns +(`.md' file) and a C header file of macro definitions. -`CONST_COSTS (X, CODE)' - A part of a C `switch' statement that describes the relative costs - of constant RTL expressions. It must contain `case' labels for - expression codes `const_int', `const', `symbol_ref', `label_ref' - and `const_double'. Each case must ultimately reach a `return' - statement to return the relative cost of the use of that kind of - constant value in an expression. The cost may depend on the - precise value of the constant, which is available for examination - in X. - - CODE is the expression code--redundant, since it can be obtained - with `GET_CODE (X)'. - -`RTX_COSTS (X, CODE)' - Like `CONST_COSTS' but applies to nonconstant RTL expressions. - This can be used, for example, to indicate how costly a multiply - instruction is. In writing this macro, you can use the construct - `COSTS_N_INSNS (N)' to specify a cost equal to N fast - instructions. - - This macro is optional; do not define it if the default cost - assumptions are adequate for the target machine. - -`ADDRESS_COST (ADDRESS)' - An expression giving the cost of an addressing mode that contains - ADDRESS. If not defined, the cost is computed from the ADDRESS - expression and the `CONST_COSTS' values. - - For most CISC machines, the default cost is a good approximation - of the true cost of the addressing mode. However, on RISC - machines, all instructions normally have the same length and - execution time. Hence all addresses will have equal costs. - - In cases where more than one form of an address is known, the - form with the lowest cost will be used. If multiple forms have - the same, lowest, cost, the one that is the most complex will be - used. - - For example, suppose an address that is equal to the sum of a - register and a constant is used twice in the same basic block. - When this macro is not defined, the address will be computed in a - register and memory references will be indirect through that - register. On machines where the cost of the addressing mode - containing the sum is no higher than that of a simple indirect - reference, this will produce an additional instruction and - possibly require an additional register. Proper specification of - this macro eliminates this overhead for such machines. - - Similar use of this macro is made in strength reduction of loops. - - ADDRESS need not be valid as an address. In such a case, the cost - is not relevant and can be any value; invalid addresses need not - be assigned a different cost. - - On machines where an address involving more than one register is - as cheap as an address computation involving only one register, - defining `ADDRESS_COST' to reflect this can cause two registers - to be live over a region of code where only one would have been if - `ADDRESS_COST' were not defined in that manner. This effect - should be considered in the definition of this macro. Equivalent - costs should probably only be given to addresses with different - numbers of registers on machines with lots of registers. - - This macro will normally either not be defined or be defined as a - constant. - -`REGISTER_MOVE_COST (FROM, TO)' - A C expression for the cost of moving data from a register in - class FROM to one in class TO. The classes are expressed using - the enumeration values such as `GENERAL_REGS'. A value of 2 is - the default; other values are interpreted relative to that. - - It is not required that the cost always equal 2 when FROM is the - same as TO; on some machines it is expensive to move between - registers if they are not general registers. - - If reload sees an insn consisting of a single `set' between two - hard registers, and if `REGISTER_MOVE_COST' applied to their - classes returns a value of 2, reload does not check to ensure - that the constraints of the insn are met. Setting a cost of - other than 2 will allow reload to verify that the constraints are - met. You should do this if the `movM' pattern's constraints do - not allow such copying. - -`MEMORY_MOVE_COST (M)' - A C expression for the cost of moving data of mode M between a - register and memory. A value of 2 is the default; this cost is - relative to those in `REGISTER_MOVE_COST'. - - If moving between registers and memory is more expensive than - between two registers, you should define this macro to express - the relative cost. - -`BRANCH_COST' - A C expression for the cost of a branch instruction. A value of - 1 is the default; other values are interpreted relative to that. - - Here are additional macros which do not specify precise relative -costs, but only that certain actions are more expensive than GNU CC -would ordinarily expect. - -`SLOW_BYTE_ACCESS' - Define this macro as a C expression which is nonzero if accessing - less than a word of memory (i.e. a `char' or a `short') is no - faster than accessing a word of memory, i.e., if such access - require more than one instruction or if there is no difference in - cost between byte and (aligned) word loads. - - When this macro is not defined, the compiler will access a field - by finding the smallest containing object; when it is defined, a - fullword load will be used if alignment permits. Unless bytes - accesses are faster than word accesses, using word accesses is - preferable since it may eliminate subsequent memory access if - subsequent accesses occur to other fields in the same word of the - structure, but to different bytes. - -`SLOW_ZERO_EXTEND' - Define this macro if zero-extension (of a `char' or `short' to an - `int') can be done faster if the destination is a register that - is known to be zero. - - If you define this macro, you must have instruction patterns that - recognize RTL structures like this: - - (set (strict_low_part (subreg:QI (reg:SI ...) 0)) ...) - - and likewise for `HImode'. - -`SLOW_UNALIGNED_ACCESS' - Define this macro if unaligned accesses have a cost many times - greater than aligned accesses, for example if they are emulated - in a trap handler. - - When this macro is defined, the compiler will act as if - `STRICT_ALIGNMENT' were defined when generating code for block - moves. This can cause significantly more instructions to be - produced. Therefore, do not define this macro if unaligned - accesses only add a cycle or two to the time for a memory access. - -`DONT_REDUCE_ADDR' - Define this macro to inhibit strength reduction of memory - addresses. (On some machines, such strength reduction seems to - do harm rather than good.) - -`MOVE_RATIO' - The number of scalar move insns which should be generated instead - of a string move insn or a library call. Increasing the value - will always make code faster, but eventually incurs high cost in - increased code size. - - If you don't define this, a reasonable default is used. - -`NO_FUNCTION_CSE' - Define this macro if it is as good or better to call a constant - function address than to call an address kept in a register. - -`NO_RECURSIVE_FUNCTION_CSE' - Define this macro if it is as good or better for a function to - call itself with an explicit address than to call an address kept - in a register. + The `.md' file for a target machine contains a pattern for each +instruction that the target machine supports (or at least each +instruction that is worth telling the compiler about). It may also +contain comments. A semicolon causes the rest of the line to be a +comment, unless the semicolon is inside a quoted string. - -File: gcc.info, Node: Sections, Next: PIC, Prev: Costs, Up: Machine Macros + See the next chapter for information on the C header file. -Dividing the Output into Sections (Texts, Data, ...) -==================================================== +* Menu: - An object file is divided into sections containing different types -of data. In the most common case, there are three sections: the "text -section", which holds instructions and read-only data; the "data -section", which holds initialized writable data; and the "bss -section", which holds uninitialized data. Some systems have other -kinds of sections. - - The compiler must tell the assembler when to switch sections. These -macros control what commands to output to tell the assembler this. You -can also define additional sections. - -`TEXT_SECTION_ASM_OP' - A C string constant for the assembler operation that should - precede instructions and read-only data. Normally `".text"' is - right. - -`DATA_SECTION_ASM_OP' - A C string constant for the assembler operation to identify the - following data as writable initialized data. Normally `".data"' - is right. - -`SHARED_SECTION_ASM_OP' - If defined, a C string constant for the assembler operation to - identify the following data as shared data. If not defined, - `DATA_SECTION_ASM_OP' will be used. - -`INIT_SECTION_ASM_OP' - If defined, a C string constant for the assembler operation to - identify the following data as initialization code. If not - defined, GNU CC will assume such a section does not exist. - -`EXTRA_SECTIONS' - A list of names for sections other than the standard two, which - are `in_text' and `in_data'. You need not define this macro on a - system with no other sections (that GCC needs to use). - -`EXTRA_SECTION_FUNCTIONS' - One or more functions to be defined in `varasm.c'. These - functions should do jobs analogous to those of `text_section' and - `data_section', for your additional sections. Do not define this - macro if you do not define `EXTRA_SECTIONS'. - -`READONLY_DATA_SECTION' - On most machines, read-only variables, constants, and jump tables - are placed in the text section. If this is not the case on your - machine, this macro should be defined to be the name of a - function (either `data_section' or a function defined in - `EXTRA_SECTIONS') that switches to the section to be used for - read-only items. - - If these items should be placed in the text section, this macro - should not be defined. - -`SELECT_SECTION (EXP, RELOC)' - A C statement or statements to switch to the appropriate section - for output of EXP. You can assume that EXP is either a - `VAR_DECL' node or a constant of some sort. RELOC indicates - whether the initial value of EXP requires link-time relocations. - Select the section by calling `text_section' or one of the - alternatives for other sections. - - Do not define this macro if you put all read-only variables and - constants in the read-only data section (usually the text - section). - -`SELECT_RTX_SECTION (MODE, RTX)' - A C statement or statements to switch to the appropriate section - for output of RTX in mode MODE. You can assume that RTX is some - kind of constant in RTL. The argument MODE is redundant except - in the case of a `const_int' rtx. Select the section by calling - `text_section' or one of the alternatives for other sections. - - Do not define this macro if you put all constants in the read-only - data section. - -`JUMP_TABLES_IN_TEXT_SECTION' - Define this macro if jump tables (for `tablejump' insns) should be - output in the text section, along with the assembler instructions. - Otherwise, the readonly data section is used. - - This macro is irrelevant if there is no separate readonly data - section. - -`ENCODE_SECTION_INFO (DECL)' - Define this macro if references to a symbol must be treated - differently depending on something about the variable or function - named by the symbol (such as what section it is in). - - The macro definition, if any, is executed immediately after the - rtl for DECL has been created and stored in `DECL_RTL (DECL)'. - The value of the rtl will be a `mem' whose address is a - `symbol_ref'. - - The usual thing for this macro to do is to record a flag in the - `symbol_ref' (such as `SYMBOL_REF_FLAG') or to store a modified - name string in the `symbol_ref' (if one bit is not enough - information). +* Patterns:: How to write instruction patterns. +* Example:: An explained example of a `define_insn' pattern. +* RTL Template:: The RTL template defines what insns match a pattern. +* Output Template:: The output template says how to make assembler code + from such an insn. +* Output Statement:: For more generality, write C code to output + the assembler code. +* Constraints:: When not all operands are general operands. +* Standard Names:: Names mark patterns to use for code generation. +* Pattern Ordering:: When the order of patterns makes a difference. +* Dependent Patterns:: Having one pattern may make you need another. +* Jump Patterns:: Special considerations for patterns for jump insns. +* Insn Canonicalizations::Canonicalization of Instructions +* Peephole Definitions::Defining machine-specific peephole optimizations. +* Expander Definitions::Generating a sequence of several RTL insns + for a standard operation. +* Insn Splitting:: Splitting Instructions into Multiple Instructions +* Insn Attributes:: Specifying the value of attributes for generated insns.  -File: gcc.info, Node: PIC, Next: Assembler Format, Prev: Sections, Up: Machine Macros +File: gcc.info, Node: Patterns, Next: Example, Up: Machine Desc + +Everything about Instruction Patterns +===================================== + + Each instruction pattern contains an incomplete RTL expression, with +pieces to be filled in later, operand constraints that restrict how the +pieces can be filled in, and an output pattern or C code to generate +the assembler output, all wrapped up in a `define_insn' expression. + + A `define_insn' is an RTL expression containing four or five +operands: + + 1. An optional name. The presence of a name indicate that this + instruction pattern can perform a certain standard job for the + RTL-generation pass of the compiler. This pass knows certain + names and will use the instruction patterns with those names, if + the names are defined in the machine description. + + The absence of a name is indicated by writing an empty string + where the name should go. Nameless instruction patterns are never + used for generating RTL code, but they may permit several simpler + insns to be combined later on. + + Names that are not thus known and used in RTL-generation have no + effect; they are equivalent to no name at all. + + 2. The "RTL template" (*note RTL Template::.) is a vector of + incomplete RTL expressions which show what the instruction should + look like. It is incomplete because it may contain + `match_operand', `match_operator', and `match_dup' expressions + that stand for operands of the instruction. + + If the vector has only one element, that element is the template + for the instruction pattern. If the vector has multiple elements, + then the instruction pattern is a `parallel' expression containing + the elements described. + + 3. A condition. This is a string which contains a C expression that + is the final test to decide whether an insn body matches this + pattern. + + For a named pattern, the condition (if present) may not depend on + the data in the insn being matched, but only the + target-machine-type flags. The compiler needs to test these + conditions during initialization in order to learn exactly which + named instructions are available in a particular run. + + For nameless patterns, the condition is applied only when matching + an individual insn, and only after the insn has matched the + pattern's recognition template. The insn's operands may be found + in the vector `operands'. + + 4. The "output template": a string that says how to output matching + insns as assembler code. `%' in this string specifies where to + substitute the value of an operand. *Note Output Template::. -Position Independent Code -========================= + When simple substitution isn't general enough, you can specify a + piece of C code to compute the output. *Note Output Statement::. - This section describes macros that help implement generation of -position independent code. Simply defining these macros is not enough -to generate valid PIC; you must also add support to the macros -`GO_IF_LEGITIMATE_ADDRESS' and `LEGITIMIZE_ADDRESS', and -`PRINT_OPERAND_ADDRESS' as well. You must modify the definition of -`movsi' to do something appropriate when the source operand contains a -symbolic address. You may also need to alter the handling of switch -statements so that they use relative addresses. - -`PIC_OFFSET_TABLE_REGNUM' - The register number of the register used to address a table of - static data addresses in memory. In some cases this register is - defined by a processor's "application binary interface" (ABI). - When this macro is defined, RTL is generated for this register - once, as with the stack pointer and frame pointer registers. If - this macro is not defined, it is up to the machine-dependent - files to allocate such a register (if necessary). - -`FINALIZE_PIC' - By generating position-independent code, when two different - programs (A and B) share a common library (libC.a), the text of - the library can be shared whether or not the library is linked at - the same address for both programs. In some of these - environments, position-independent code requires not only the use - of different addressing modes, but also special code to enable - the use of these addressing modes. - - The `FINALIZE_PIC' macro serves as a hook to emit these special - codes once the function is being compiled into assembly code, but - not before. (It is not done before, because in the case of - compiling an inline function, it would lead to multiple PIC - prologues being included in functions which used inline functions - and were compiled to assembly language.) + 5. Optionally, a vector containing the values of attributes for insns + matching this pattern. *Note Insn Attributes::.  -File: gcc.info, Node: Assembler Format, Next: Debugging Info, Prev: PIC, Up: Machine Macros +File: gcc.info, Node: Example, Next: RTL Template, Prev: Patterns, Up: Machine Desc -Defining the Output Assembler Language -====================================== +Example of `define_insn' +======================== - This section describes macros whose principal purpose is to -describe how to write instructions in assembler language--rather than -what the instructions do. + Here is an actual example of an instruction pattern, for the +68000/68020. -* Menu: + (define_insn "tstsi" + [(set (cc0) + (match_operand:SI 0 "general_operand" "rm"))] + "" + "* + { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) + return \"tstl %0\"; + return \"cmpl #0,%0\"; }") + + This is an instruction that sets the condition codes based on the +value of a general operand. It has no condition, so any insn whose RTL +description has the form shown may be handled according to this +pattern. The name `tstsi' means "test a `SImode' value" and tells the +RTL generation pass that, when it is necessary to test such a value, an +insn to do so can be constructed using this pattern. + + The output control string is a piece of C code which chooses which +output template to return based on the kind of operand and the specific +type of CPU for which code is being generated. -* File Framework:: Structural information for the assembler file. -* Data Output:: Output of constants (numbers, strings, addresses). -* Uninitialized Data:: Output of uninitialized variables. -* Label Output:: Output and generation of labels. -* Constructor Output:: Output of initialization and termination routines. -* Instruction Output:: Output of actual instructions. -* Dispatch Tables:: Output of jump tables. -* Alignment Output:: Pseudo ops for alignment and skipping data. + `"rm"' is an operand constraint. Its meaning is explained below.  -File: gcc.info, Node: File Framework, Next: Data Output, Prev: Assembler Format, Up: Assembler Format +File: gcc.info, Node: RTL Template, Next: Output Template, Prev: Example, Up: Machine Desc -The Overall Framework of an Assembler File ------------------------------------------- +RTL Template +============ -`ASM_FILE_START (STREAM)' - A C expression which outputs to the stdio stream STREAM some - appropriate text to go at the start of an assembler file. - - Normally this macro is defined to output a line containing - `#NO_APP', which is a comment that has no effect on most - assemblers but tells the GNU assembler that it can save time by - not checking for certain assembler constructs. - - On systems that use SDB, it is necessary to output certain - commands; see `attasm.h'. - -`ASM_FILE_END (STREAM)' - A C expression which outputs to the stdio stream STREAM some - appropriate text to go at the end of an assembler file. - - If this macro is not defined, the default is to output nothing - special at the end of the file. Most systems don't require any - definition. - - On systems that use SDB, it is necessary to output certain - commands; see `attasm.h'. - -`ASM_IDENTIFY_GCC (FILE)' - A C statement to output assembler commands which will identify - the object file as having been compiled with GNU CC (or another - GNU compiler). - - If you don't define this macro, the string `gcc_compiled.:' is - output. This string is calculated to define a symbol which, on - BSD systems, will never be defined for any other reason. GDB - checks for the presence of this symbol when reading the symbol - table of an executable. - - On non-BSD systems, you must arrange communication with GDB in - some other fashion. If GDB is not used on your system, you can - define this macro with an empty body. - -`ASM_COMMENT_START' - A C string constant describing how to begin a comment in the - target assembler language. The compiler assumes that the comment - will end at the end of the line. - -`ASM_APP_ON' - A C string constant for text to be output before each `asm' - statement or group of consecutive ones. Normally this is - `"#APP"', which is a comment that has no effect on most - assemblers but tells the GNU assembler that it must check the - lines that follow for all valid assembler constructs. - -`ASM_APP_OFF' - A C string constant for text to be output after each `asm' - statement or group of consecutive ones. Normally this is - `"#NO_APP"', which tells the GNU assembler to resume making the - time-saving assumptions that are valid for ordinary compiler - output. - -`ASM_OUTPUT_SOURCE_FILENAME (STREAM, NAME)' - A C statement to output COFF information or DWARF debugging - information which indicates that filename NAME is the current - source file to the stdio stream STREAM. - - This macro need not be defined if the standard form of output for - the file format in use is appropriate. - -`ASM_OUTPUT_SOURCE_LINE (STREAM, LINE)' - A C statement to output DBX or SDB debugging information before - code for line number LINE of the current source file to the stdio - stream STREAM. - - This macro need not be defined if the standard form of debugging - information for the debugger in use is appropriate. - -`ASM_OUTPUT_IDENT (STREAM, STRING)' - A C statement to output something to the assembler file to handle - a `#ident' directive containing the text STRING. If this macro - is not defined, nothing is output for a `#ident' directive. - -`OBJC_PROLOGUE' - A C statement to output any assembler statements which are - required to precede any Objective C object definitions or message - sending. The statement is executed only when compiling an - Objective C program. + The RTL template is used to define which insns match the particular +pattern and how to find their operands. For named patterns, the RTL +template also says how to construct an insn from specified operands. + + Construction involves substituting specified operands into a copy of +the template. Matching involves determining the values that serve as +the operands in the insn being matched. Both of these activities are +controlled by special expression types that direct matching and +substitution of the operands. + +`(match_operand:M N PREDICATE CONSTRAINT)' + This expression is a placeholder for operand number N of the insn. + When constructing an insn, operand number N will be substituted + at this point. When matching an insn, whatever appears at this + position in the insn will be taken as operand number N; but it + must satisfy PREDICATE or this instruction pattern will not match + at all. + + Operand numbers must be chosen consecutively counting from zero in + each instruction pattern. There may be only one `match_operand' + expression in the pattern for each operand number. Usually + operands are numbered in the order of appearance in `match_operand' + expressions. + + PREDICATE is a string that is the name of a C function that + accepts two arguments, an expression and a machine mode. During + matching, the function will be called with the putative operand as + the expression and M as the mode argument (if M is not specified, + `VOIDmode' will be used, which normally causes PREDICATE to accept + any mode). If it returns zero, this instruction pattern fails to + match. PREDICATE may be an empty string; then it means no test is + to be done on the operand, so anything which occurs in this + position is valid. + + Most of the time, PREDICATE will reject modes other than M--but + not always. For example, the predicate `address_operand' uses M + as the mode of memory ref that the address should be valid for. + Many predicates accept `const_int' nodes even though their mode is + `VOIDmode'. + + CONSTRAINT controls reloading and the choice of the best register + class to use for a value, as explained later (*note + Constraints::.). + + People are often unclear on the difference between the constraint + and the predicate. The predicate helps decide whether a given + insn matches the pattern. The constraint plays no role in this + decision; instead, it controls various decisions in the case of an + insn which does match. + + On CISC machines, the most common PREDICATE is + `"general_operand"'. This function checks that the putative + operand is either a constant, a register or a memory reference, + and that it is valid for mode M. + + For an operand that must be a register, PREDICATE should be + `"register_operand"'. Using `"general_operand"' would be valid, + since the reload pass would copy any non-register operands through + registers, but this would make GNU CC do extra work, it would + prevent invariant operands (such as constant) from being removed + from loops, and it would prevent the register allocator from doing + the best possible job. On RISC machines, it is usually most + efficient to allow PREDICATE to accept only objects that the + constraints allow. + + For an operand that must be a constant, you must be sure to either + use `"immediate_operand"' for PREDICATE, or make the instruction + pattern's extra condition require a constant, or both. You cannot + expect the constraints to do this work! If the constraints allow + only constants, but the predicate allows something else, the + compiler will crash when that case arises. + +`(match_scratch:M N CONSTRAINT)' + This expression is also a placeholder for operand number N and + indicates that operand must be a `scratch' or `reg' expression. + + When matching patterns, this is equivalent to + + (match_operand:M N "scratch_operand" PRED) + + but, when generating RTL, it produces a (`scratch':M) expression. + + If the last few expressions in a `parallel' are `clobber' + expressions whose operands are either a hard register or + `match_scratch', the combiner can add or delete them when + necessary. *Note Side Effects::. + +`(match_dup N)' + This expression is also a placeholder for operand number N. It is + used when the operand needs to appear more than once in the insn. + + In construction, `match_dup' acts just like `match_operand': the + operand is substituted into the insn being constructed. But in + matching, `match_dup' behaves differently. It assumes that operand + number N has already been determined by a `match_operand' + appearing earlier in the recognition template, and it matches only + an identical-looking expression. + +`(match_operator:M N PREDICATE [OPERANDS...])' + This pattern is a kind of placeholder for a variable RTL expression + code. + + When constructing an insn, it stands for an RTL expression whose + expression code is taken from that of operand N, and whose + operands are constructed from the patterns OPERANDS. + + When matching an expression, it matches an expression if the + function PREDICATE returns nonzero on that expression *and* the + patterns OPERANDS match the operands of the expression. + + Suppose that the function `commutative_operator' is defined as + follows, to match any expression whose operator is one of the + commutative arithmetic operators of RTL and whose mode is MODE: + + int + commutative_operator (x, mode) + rtx x; + enum machine_mode mode; + { + enum rtx_code code = GET_CODE (x); + if (GET_MODE (x) != mode) + return 0; + return (GET_RTX_CLASS (code) == 'c' + || code == EQ || code == NE); + } + + Then the following pattern will match any RTL expression consisting + of a commutative operator applied to two general operands: + + (match_operator:SI 3 "commutative_operator" + [(match_operand:SI 1 "general_operand" "g") + (match_operand:SI 2 "general_operand" "g")]) + + Here the vector `[OPERANDS...]' contains two patterns because the + expressions to be matched all contain two operands. + + When this pattern does match, the two operands of the commutative + operator are recorded as operands 1 and 2 of the insn. (This is + done by the two instances of `match_operand'.) Operand 3 of the + insn will be the entire commutative expression: use `GET_CODE + (operands[3])' to see which commutative operator was used. + + The machine mode M of `match_operator' works like that of + `match_operand': it is passed as the second argument to the + predicate function, and that function is solely responsible for + deciding whether the expression to be matched "has" that mode. + + When constructing an insn, argument 3 of the gen-function will + specify the operation (i.e. the expression code) for the + expression to be made. It should be an RTL expression, whose + expression code is copied into a new expression whose operands are + arguments 1 and 2 of the gen-function. The subexpressions of + argument 3 are not used; only its expression code matters. + + When `match_operator' is used in a pattern for matching an insn, + it usually best if the operand number of the `match_operator' is + higher than that of the actual operands of the insn. This improves + register allocation because the register allocator often looks at + operands 1 and 2 of insns to see if it can do register tying. + + There is no way to specify constraints in `match_operator'. The + operand of the insn which corresponds to the `match_operator' + never has any constraints because it is never reloaded as a whole. + However, if parts of its OPERANDS are matched by `match_operand' + patterns, those parts may have constraints of their own. + +`(match_op_dup:M N[OPERANDS...])' + Like `match_dup', except that it applies to operators instead of + operands. When constructing an insn, operand number N will be + substituted at this point. But in matching, `match_op_dup' behaves + differently. It assumes that operand number N has already been + determined by a `match_operator' appearing earlier in the + recognition template, and it matches only an identical-looking + expression. + +`(match_parallel N PREDICATE [SUBPAT...])' + This pattern is a placeholder for an insn that consists of a + `parallel' expression with a variable number of elements. This + expression should only appear at the top level of an insn pattern. + + When constructing an insn, operand number N will be substituted at + this point. When matching an insn, it matches if the body of the + insn is a `parallel' expression with at least as many elements as + the vector of SUBPAT expressions in the `match_parallel', if each + SUBPAT matches the corresponding element of the `parallel', *and* + the function PREDICATE returns nonzero on the `parallel' that is + the body of the insn. It is the responsibility of the predicate + to validate elements of the `parallel' beyond those listed in the + `match_parallel'. + + A typical use of `match_parallel' is to match load and store + multiple expressions, which can contain a variable number of + elements in a `parallel'. For example, + + (define_insn "" + [(match_parallel 0 "load_multiple_operation" + [(set (match_operand:SI 1 "gpc_reg_operand" "=r") + (match_operand:SI 2 "memory_operand" "m")) + (use (reg:SI 179)) + (clobber (reg:SI 179))])] + "" + "loadm 0,0,%1,%2") + + This example comes from `a29k.md'. The function + `load_multiple_operations' is defined in `a29k.c' and checks that + subsequent elements in the `parallel' are the same as the `set' in + the pattern, except that they are referencing subsequent registers + and memory locations. + + An insn that matches this pattern might look like: + + (parallel + [(set (reg:SI 20) (mem:SI (reg:SI 100))) + (use (reg:SI 179)) + (clobber (reg:SI 179)) + (set (reg:SI 21) + (mem:SI (plus:SI (reg:SI 100) + (const_int 4)))) + (set (reg:SI 22) + (mem:SI (plus:SI (reg:SI 100) + (const_int 8))))]) + +`(match_par_dup N [SUBPAT...])' + Like `match_op_dup', but for `match_parallel' instead of + `match_operator'. + +`(address (match_operand:M N "address_operand" ""))' + This complex of expressions is a placeholder for an operand number + N in a "load address" instruction: an operand which specifies a + memory location in the usual way, but for which the actual operand + value used is the address of the location, not the contents of the + location. + + `address' expressions never appear in RTL code, only in machine + descriptions. And they are used only in machine descriptions that + do not use the operand constraint feature. When operand + constraints are in use, the letter `p' in the constraint serves + this purpose. + + M is the machine mode of the *memory location being addressed*, + not the machine mode of the address itself. That mode is always + the same on a given target machine (it is `Pmode', which normally + is `SImode'), so there is no point in mentioning it; thus, no + machine mode is written in the `address' expression. If some day + support is added for machines in which addresses of different + kinds of objects appear differently or are used differently (such + as the PDP-10), different formats would perhaps need different + machine modes and these modes might be written in the `address' + expression.  -File: gcc.info, Node: Data Output, Next: Uninitialized Data, Prev: File Framework, Up: Assembler Format - -Output of Data --------------- +File: gcc.info, Node: Output Template, Next: Output Statement, Prev: RTL Template, Up: Machine Desc -`ASM_OUTPUT_LONG_DOUBLE (STREAM, VALUE)' -`ASM_OUTPUT_DOUBLE (STREAM, VALUE)' -`ASM_OUTPUT_FLOAT (STREAM, VALUE)' - A C statement to output to the stdio stream STREAM an assembler - instruction to assemble a floating-point constant of `TFmode', - `DFmode' or `SFmode', respectively, whose value is VALUE. VALUE - will be a C expression of type `REAL_VALUE__TYPE', usually - `double'. - -`ASM_OUTPUT_QUADRUPLE_INT (STREAM, EXP)' -`ASM_OUTPUT_DOUBLE_INT (STREAM, EXP)' -`ASM_OUTPUT_INT (STREAM, EXP)' -`ASM_OUTPUT_SHORT (STREAM, EXP)' -`ASM_OUTPUT_CHAR (STREAM, EXP)' - A C statement to output to the stdio stream STREAM an assembler - instruction to assemble an integer of 16, 8, 4, 2 or 1 bytes, - respectively, whose value is VALUE. The argument EXP will be an - RTL expression which represents a constant value. Use - `output_addr_const (STREAM, EXP)' to output this value as an - assembler expression. - - For sizes larger than `UNITS_PER_WORD', if the action of a macro - would be identical to repeatedly calling the macro corresponding - to a size of `UNITS_PER_WORD', once for each word, you need not - define the macro. - -`ASM_OUTPUT_BYTE (STREAM, VALUE)' - A C statement to output to the stdio stream STREAM an assembler - instruction to assemble a single byte containing the number VALUE. - -`ASM_BYTE_OP' - A C string constant giving the pseudo-op to use for a sequence of - single-byte constants. If this macro is not defined, the default - is `"byte"'. - -`ASM_OUTPUT_ASCII (STREAM, PTR, LEN)' - A C statement to output to the stdio stream STREAM an assembler - instruction to assemble a string constant containing the LEN - bytes at PTR. PTR will be a C expression of type `char *' and - LEN a C expression of type `int'. - - If the assembler has a `.ascii' pseudo-op as found in the - Berkeley Unix assembler, do not define the macro - `ASM_OUTPUT_ASCII'. - -`ASM_OUTPUT_POOL_PROLOGUE (FILE FUNNAME FUNDECL SIZE)' - A C statement to output assembler commands to define the start of - the constant pool for a function. FUNNAME is a string giving the - name of the function. Should the return type of the function be - required, it can be obtained via FUNDECL. SIZE is the size, in - bytes, of the constant pool that will be written immediately - after this call. - - If no constant-pool prefix is required, the usual case, this - macro need not be defined. - -`ASM_OUTPUT_SPECIAL_POOL_ENTRY (FILE, X, MODE, ALIGN, LABELNO, JUMPTO)' - A C statement (with or without semicolon) to output a constant in - the constant pool, if it needs special treatment. (This macro - need not do anything for RTL expressions that can be output - normally.) - - The argument FILE is the standard I/O stream to output the - assembler code on. X is the RTL expression for the constant to - output, and MODE is the machine mode (in case X is a - `const_int'). ALIGN is the required alignment for the value X; - you should output an assembler directive to force this much - alignment. - - The argument LABELNO is a number to use in an internal label for - the address of this pool entry. The definition of this macro is - responsible for outputting the label definition at the proper - place. Here is how to do this: - - ASM_OUTPUT_INTERNAL_LABEL (FILE, "LC", LABELNO); - - When you output a pool entry specially, you should end with a - `goto' to the label JUMPTO. This will prevent the same pool - entry from being output a second time in the usual manner. - - You need not define this macro if it would do nothing. - -`ASM_OPEN_PAREN' -`ASM_CLOSE_PAREN' - These macros are defined as C string constant, describing the - syntax in the assembler for grouping arithmetic expressions. The - following definitions are correct for most assemblers: +Output Templates and Operand Substitution +========================================= - #define ASM_OPEN_PAREN "(" - #define ASM_CLOSE_PAREN ")" + The "output template" is a string which specifies how to output the +assembler code for an instruction pattern. Most of the template is a +fixed string which is output literally. The character `%' is used to +specify where to substitute an operand; it can also be used to identify +places where different variants of the assembler require different +syntax. + + In the simplest case, a `%' followed by a digit N says to output +operand N at that point in the string. + + `%' followed by a letter and a digit says to output an operand in an +alternate fashion. Four letters have standard, built-in meanings +described below. The machine description macro `PRINT_OPERAND' can +define additional letters with nonstandard meanings. + + `%cDIGIT' can be used to substitute an operand that is a constant +value without the syntax that normally indicates an immediate operand. + + `%nDIGIT' is like `%cDIGIT' except that the value of the constant is +negated before printing. + + `%aDIGIT' can be used to substitute an operand as if it were a +memory reference, with the actual operand treated as the address. This +may be useful when outputting a "load address" instruction, because +often the assembler syntax for such an instruction requires you to +write the operand as if it were a memory reference. + + `%lDIGIT' is used to substitute a `label_ref' into a jump +instruction. + + `%=' outputs a number which is unique to each instruction in the +entire compilation. This is useful for making local labels to be +referred to more than once in a single template that generates multiple +assembler instructions. + + `%' followed by a punctuation character specifies a substitution that +does not use an operand. Only one case is standard: `%%' outputs a `%' +into the assembler code. Other nonstandard cases can be defined in the +`PRINT_OPERAND' macro. You must also define which punctuation +characters are valid with the `PRINT_OPERAND_PUNCT_VALID_P' macro. + + The template may generate multiple assembler instructions. Write +the text for the instructions, with `\;' between them. + + When the RTL contains two operands which are required by constraint +to match each other, the output template must refer only to the +lower-numbered operand. Matching operands are not always identical, +and the rest of the compiler arranges to put the proper RTL expression +for printing into the lower-numbered operand. + + One use of nonstandard letters or punctuation following `%' is to +distinguish between different assembler languages for the same machine; +for example, Motorola syntax versus MIT syntax for the 68000. Motorola +syntax requires periods in most opcode names, while MIT syntax does +not. For example, the opcode `movel' in MIT syntax is `move.l' in +Motorola syntax. The same file of patterns is used for both kinds of +output syntax, but the character sequence `%.' is used in each place +where Motorola syntax wants a period. The `PRINT_OPERAND' macro for +Motorola syntax defines the sequence to output a period; the macro for +MIT syntax defines it to do nothing. + + As a special case, a template consisting of the single character `#' +instructs the compiler to first split the insn, and then output the +resulting instructions separately. This helps eliminate redundancy in +the output templates. If you have a `define_insn' that needs to emit +multiple assembler instructions, and there is an matching `define_split' +already defined, then you can simply use `#' as the output template +instead of writing an output template that emits the multiple assembler +instructions. + + If `ASSEMBLER_DIALECT' is defined, you can use +`{option0|option1|option2}' constructs in the templates. These +describe multiple variants of assembler language syntax. *Note +Instruction Output::. - \ No newline at end of file