--- gcc/gcc.info-14 2018/04/24 17:55:42 1.1.1.3 +++ gcc/gcc.info-14 2018/04/24 18:17:47 1.1.1.7 @@ -1,9 +1,13 @@ -This is Info file gcc.info, produced by Makeinfo-1.47 from the input +This is Info file gcc.info, produced by Makeinfo-1.55 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 675 Massachusetts Avenue +Cambridge, MA 02139 USA + + Copyright (C) 1988, 1989, 1992, 1993, 1994 Free Software Foundation, +Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -11,1042 +15,1086 @@ preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the sections entitled "GNU General Public License" and "Boycott" -are included exactly as in the original, and provided that the entire +that the sections entitled "GNU General Public License," "Funding for +Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are +included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public -License" and "Boycott", and this permission notice, may be included in +License," "Funding for Free Software," and "Protect Your Freedom--Fight +`Look And Feel'", and this permission notice, may be included in translations approved by the Free Software Foundation instead of in the original English.  -File: gcc.info, Node: Register Classes, Next: Stack and Calling, Prev: Registers, Up: Target Macros +File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL -Register Classes -================ +Insns +===== - On many machines, the numbered registers are not all equivalent. For -example, certain registers may not be allowed for indexed addressing; -certain registers may not be allowed in some instructions. These -machine restrictions are described to the compiler using "register -classes". - - You define a number of register classes, giving each one a name and -saying which of the registers belong to it. Then you can specify -register classes that are allowed as operands to particular instruction -patterns. - - In general, each register will belong to several classes. In fact, -one class must be named `ALL_REGS' and contain all the registers. -Another class must be named `NO_REGS' and contain no registers. Often -the union of two classes will be another class; however, this is not -required. - - One of the classes must be named `GENERAL_REGS'. There is nothing -terribly special about the name, but the operand constraint letters `r' -and `g' specify this class. If `GENERAL_REGS' is the same as -`ALL_REGS', just define it as a macro which expands to `ALL_REGS'. - - Order the classes so that if class X is contained in class Y then X -has a lower class number than Y. - - The way classes other than `GENERAL_REGS' are specified in operand -constraints is through machine-dependent operand constraint letters. -You can define such letters to correspond to various classes, then use -them in operand constraints. - - You should define a class for the union of two classes whenever some -instruction allows both classes. For example, if an instruction allows -either a floating point (coprocessor) register or a general register -for a certain operand, you should define a class `FLOAT_OR_GENERAL_REGS' -which includes both of them. Otherwise you will get suboptimal code. - - You must also specify certain redundant information about the -register classes: for each class, which classes contain it and which -ones are contained in it; for each pair of classes, the largest class -contained in their union. - - When a value occupying several consecutive registers is expected in a -certain class, all the registers used must belong to that class. -Therefore, register classes cannot be used to enforce a requirement for -a register pair to start with an even-numbered register. The way to -specify this requirement is with `HARD_REGNO_MODE_OK'. - - Register classes used for input-operands of bitwise-and or shift -instructions have a special requirement: each such class must have, for -each fixed-point machine mode, a subclass whose registers can transfer -that mode to or from memory. For example, on some machines, the -operations for single-byte values (`QImode') are limited to certain -registers. When this is so, each register class that is used in a -bitwise-and or shift instruction must have a subclass consisting of -registers from which single-byte values can be loaded or stored. This -is so that `PREFERRED_RELOAD_CLASS' can always have a possible value to -return. - -`enum reg_class' - An enumeral type that must be defined with all the register class - names as enumeral values. `NO_REGS' must be first. `ALL_REGS' - must be the last register class, followed by one more enumeral - value, `LIM_REG_CLASSES', which is not a register class but rather - tells how many classes there are. - - Each register class has a number, which is the value of casting - the class name to type `int'. The number serves as an index in - many of the tables described below. - -`N_REG_CLASSES' - The number of distinct register classes, defined as follows: - - #define N_REG_CLASSES (int) LIM_REG_CLASSES - -`REG_CLASS_NAMES' - An initializer containing the names of the register classes as C - string constants. These names are used in writing some of the - debugging dumps. - -`REG_CLASS_CONTENTS' - An initializer containing the contents of the register classes, as - integers which are bit masks. The Nth integer specifies the - contents of class N. The way the integer MASK is interpreted is - that register R is in the class if `MASK & (1 << R)' is 1. - - When the machine has more than 32 registers, an integer does not - suffice. Then the integers are replaced by sub-initializers, - braced groupings containing several integers. Each - sub-initializer must be suitable as an initializer for the type - `HARD_REG_SET' which is defined in `hard-reg-set.h'. - -`REGNO_REG_CLASS (REGNO)' - A C expression whose value is a register class containing hard - register REGNO. In general there is more that one such class; - choose a class which is "minimal", meaning that no smaller class - also contains the register. - -`BASE_REG_CLASS' - A macro whose definition is the name of the class to which a valid - base register must belong. A base register is one used in an - address which is the register value plus a displacement. - -`INDEX_REG_CLASS' - A macro whose definition is the name of the class to which a valid - index register must belong. An index register is one used in an - address where its value is either multiplied by a scale factor or - added to another register (as well as added to a displacement). - -`REG_CLASS_FROM_LETTER (CHAR)' - A C expression which defines the machine-dependent operand - constraint letters for register classes. If CHAR is such a - letter, the value should be the register class corresponding to - it. Otherwise, the value should be `NO_REGS'. The register - letter `r', corresponding to class `GENERAL_REGS', will not be - passed to this macro; you do not need to handle it. - -`REGNO_OK_FOR_BASE_P (NUM)' - A C expression which is nonzero if register number NUM is suitable - for use as a base register in operand addresses. It may be either - a suitable hard register or a pseudo register that has been - allocated such a hard register. - -`REGNO_OK_FOR_INDEX_P (NUM)' - A C expression which is nonzero if register number NUM is suitable - for use as an index register in operand addresses. It may be - either a suitable hard register or a pseudo register that has been - allocated such a hard register. - - The difference between an index register and a base register is - that the index register may be scaled. If an address involves the - sum of two registers, neither one of them scaled, then either one - may be labeled the "base" and the other the "index"; but whichever - labeling is used must fit the machine's constraints of which - registers may serve in each capacity. The compiler will try both - labelings, looking for one that is valid, and will reload one or - both registers only if neither labeling works. - -`PREFERRED_RELOAD_CLASS (X, CLASS)' - A C expression that places additional restrictions on the register - class to use when it is necessary to copy value X into a register - in class CLASS. The value is a register class; perhaps CLASS, or - perhaps another, smaller class. On many machines, the definition - - #define PREFERRED_RELOAD_CLASS(X,CLASS) CLASS - - is safe. - - Sometimes returning a more restrictive class makes better code. - For example, on the 68000, when X is an integer constant that is - in range for a `moveq' instruction, the value of this macro is - always `DATA_REGS' as long as CLASS includes the data registers. - Requiring a data register guarantees that a `moveq' will be used. - - If X is a `const_double', by returning `NO_REGS' you can force X - into a memory constant. This is useful on certain machines where - immediate floating values cannot be loaded into certain kinds of - registers. - -`LIMIT_RELOAD_CLASS (MODE, CLASS)' - A C expression that places additional restrictions on the register - class to use when it is necessary to be able to hold a value of - mode MODE in a reload register for which class CLASS would - ordinarily be used. - - Unlike `PREFERRED_RELOAD_CLASS', this macro should be used when - there are certain modes that simply can't go in certain reload - classes. - - The value is a register class; perhaps CLASS, or perhaps another, - smaller class. - - Don't define this macro unless the target machine has limitations - which require the macro to do something nontrivial. - -`SECONDARY_RELOAD_CLASS (CLASS, MODE, X)' -`SECONDARY_INPUT_RELOAD_CLASS (CLASS, MODE, X)' -`SECONDARY_OUTPUT_RELOAD_CLASS (CLASS, MODE, X)' - Many machines have some registers that cannot be copied directly - to or from memory or even from other types of registers. An - example is the `MQ' register, which on most machines, can only be - copied to or from general registers, but not memory. Some - machines allow copying all registers to and from memory, but - require a scratch register for stores to some memory locations - (e.g., those with symbolic address on the RT, and those with - certain symbolic address on the Sparc when compiling PIC). In - some cases, both an intermediate and a scratch register are - required. - - You should define these macros to indicate to the reload phase - that it may need to allocate at least one register for a reload in - addition to the register to contain the data. Specifically, if - copying X to a register CLASS in MODE requires an intermediate - register, you should define `SECONDARY_INPUT_RELOAD_CLASS' to - return the largest register class all of whose registers can be - used as intermediate registers or scratch registers. - - If copying a register CLASS in MODE to X requires an intermediate - or scratch register, you should define - `SECONDARY_OUTPUT_RELOAD_CLASS' to return the largest register - class required. If the requirements for input and output reloads - are the same, the macro `SECONDARY_RELOAD_CLASS' should be used - instead of defining both macros identically. - - The values returned by these macros are often `GENERAL_REGS'. - Return `NO_REGS' if no spare register is needed; i.e., if X can be - directly copied to or from a register of CLASS in MODE without - requiring a scratch register. Do not define this macro if it - would always return `NO_REGS'. - - If a scratch register is required (either with or without an - intermediate register), you should define patterns for - `reload_inM' or `reload_outM', as required (*note Standard - Names::.. These patterns, which will normally be implemented with - a `define_expand', should be similar to the `movM' patterns, - except that operand 2 is the scratch register. - - Define constraints for the reload register and scratch register - that contain a single register class. If the original reload - register (whose class is CLASS) can meet the constraint given in - the pattern, the value returned by these macros is used for the - class of the scratch register. Otherwise, two additional reload - registers are required. Their classes are obtained from the - constraints in the insn pattern. - - X might be a pseudo-register or a `subreg' of a pseudo-register, - which could either be in a hard register or in memory. Use - `true_regnum' to find out; it will return -1 if the pseudo is in - memory and the hard register number if it is in a register. - - These macros should not be used in the case where a particular - class of registers can only be copied to memory and not to another - class of registers. In that case, secondary reload registers are - not needed and would not be helpful. Instead, a stack location - must be used to perform the copy and the `movM' pattern should use - memory as a intermediate storage. This case often occurs between - floating-point and general registers. - -`SMALL_REGISTER_CLASSES' - Normally the compiler will avoid choosing spill registers from - registers that have been explicitly mentioned in the rtl (these - registers are normally those used to pass parameters and return - values). However, some machines have so few registers of certain - classes that there would not be enough registers to use as spill - registers if this were done. - - On those machines, you should define `SMALL_REGISTER_CLASSES'. - When it is defined, the compiler allows registers explicitly used - in the rtl to be used as spill registers but prevents the compiler - from extending the lifetime of these registers. - - Defining this macro is always safe, but unnecessarily defining - this macro will reduce the amount of optimizations that can be - performed in some cases. If this macro is not defined but needs - to be, the compiler will run out of reload registers and print a - fatal error message. - - For most machines, this macro should not be defined. - -`CLASS_MAX_NREGS (CLASS, MODE)' - A C expression for the maximum number of consecutive registers of - class CLASS needed to hold a value of mode MODE. - - This is closely related to the macro `HARD_REGNO_NREGS'. In fact, - the value of the macro `CLASS_MAX_NREGS (CLASS, MODE)' should be - the maximum value of `HARD_REGNO_NREGS (REGNO, MODE)' for all - REGNO values in the class CLASS. - - This macro helps control the handling of multiple-word values in - the reload pass. - - Three other special macros describe which operands fit which -constraint letters. - -`CONST_OK_FOR_LETTER_P (VALUE, C)' - A C expression that defines the machine-dependent operand - constraint letters that specify particular ranges of integer - values. If C is one of those letters, the expression should check - that VALUE, an integer, is in the appropriate range and return 1 - if so, 0 otherwise. If C is not one of those letters, the value - should be 0 regardless of VALUE. - -`CONST_DOUBLE_OK_FOR_LETTER_P (VALUE, C)' - A C expression that defines the machine-dependent operand - constraint letters that specify particular ranges of - `const_double' values. - - If C is one of those letters, the expression should check that - VALUE, an RTX of code `const_double', is in the appropriate range - and return 1 if so, 0 otherwise. If C is not one of those - letters, the value should be 0 regardless of VALUE. - - `const_double' is used for all floating-point constants and for - `DImode' fixed-point constants. A given letter can accept either - or both kinds of values. It can use `GET_MODE' to distinguish - between these kinds. - -`EXTRA_CONSTRAINT (VALUE, C)' - A C expression that defines the optional machine-dependent - constraint letters that can be used to segregate specific types of - operands, usually memory references, for the target machine. - Normally this macro will not be defined. If it is required for a - particular target machine, it should return 1 if VALUE corresponds - to the operand type represented by the constraint letter C. If C - is not defined as an extra constraint, the value returned should - be 0 regardless of VALUE. - - For example, on the ROMP, load instructions cannot have their - output in r0 if the memory reference contains a symbolic address. - Constraint letter `Q' is defined as representing a memory address - that does *not* contain a symbolic address. An alternative is - specified with a `Q' constraint on the input and `r' on the - output. The next alternative specifies `m' on the input and a - register class that does not include r0 on the output. + The RTL representation of the code for a function is a doubly-linked +chain of objects called "insns". Insns are expressions with special +codes that are used for no other purpose. Some insns are actual +instructions; others represent dispatch tables for `switch' statements; +others represent labels to jump to or various sorts of declarative +information. + + In addition to its own specific data, each insn must have a unique +id-number that distinguishes it from all other insns in the current +function (after delayed branch scheduling, copies of an insn with the +same id-number may be present in multiple places in a function, but +these copies will always be identical and will only appear inside a +`sequence'), and chain pointers to the preceding and following insns. +These three fields occupy the same position in every insn, independent +of the expression code of the insn. They could be accessed with `XEXP' +and `XINT', but instead three special macros are always used: + +`INSN_UID (I)' + Accesses the unique id of insn I. + +`PREV_INSN (I)' + Accesses the chain pointer to the insn preceding I. If I is the + first insn, this is a null pointer. + +`NEXT_INSN (I)' + Accesses the chain pointer to the insn following I. If I is the + last insn, this is a null pointer. + + The first insn in the chain is obtained by calling `get_insns'; the +last insn is the result of calling `get_last_insn'. Within the chain +delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must +always correspond: if INSN is not the first insn, + + NEXT_INSN (PREV_INSN (INSN)) == INSN + +is always true and if INSN is not the last insn, + + PREV_INSN (NEXT_INSN (INSN)) == INSN + +is always true. + + After delay slot scheduling, some of the insns in the chain might be +`sequence' expressions, which contain a vector of insns. The value of +`NEXT_INSN' in all but the last of these insns is the next insn in the +vector; the value of `NEXT_INSN' of the last insn in the vector is the +same as the value of `NEXT_INSN' for the `sequence' in which it is +contained. Similar rules apply for `PREV_INSN'. + + This means that the above invariants are not necessarily true for +insns inside `sequence' expressions. Specifically, if INSN is the +first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn +containing the `sequence' expression, as is the value of `PREV_INSN +(NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' +expression. You can use these expressions to find the containing +`sequence' expression. + + Every insn has one of the following six expression codes: + +`insn' + The expression code `insn' is used for instructions that do not + jump and do not do function calls. `sequence' expressions are + always contained in insns with code `insn' even if one of those + insns should jump or do function calls. + + Insns with code `insn' have four additional fields beyond the three + mandatory ones listed above. These four are described in a table + below. + +`jump_insn' + The expression code `jump_insn' is used for instructions that may + jump (or, more generally, may contain `label_ref' expressions). If + there is an instruction to return from the current function, it is + recorded as a `jump_insn'. + + `jump_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contain a field + `JUMP_LABEL' which is defined once jump optimization has completed. + + For simple conditional and unconditional jumps, this field + contains the `code_label' to which this insn will (possibly + conditionally) branch. In a more complex jump, `JUMP_LABEL' + records one of the labels that the insn refers to; the only way to + find the others is to scan the entire body of the insn. + + Return insns count as jumps, but since they do not refer to any + labels, they have zero in the `JUMP_LABEL' field. + +`call_insn' + The expression code `call_insn' is used for instructions that may + do function calls. It is important to distinguish these + instructions because they imply that certain registers and memory + locations may be altered unpredictably. + + `call_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contain a field + `CALL_INSN_FUNCTION_USAGE', which contains a list (chain of + `expr_list' expressions) containing `use' and `clobber' + expressions that denote hard registers used or clobbered by the + called function. A register specified in a `clobber' in this list + is modified *after* the execution of the `call_insn', while a + register in a `clobber' in the body of the `call_insn' is + clobbered before the insn completes execution. `clobber' + expressions in this list augment registers specified in + `CALL_USED_REGISTERS' (*note Register Basics::.). + +`code_label' + A `code_label' insn represents a label that a jump insn can jump + to. It contains two special fields of data in addition to the + three standard ones. `CODE_LABEL_NUMBER' is used to hold the + "label number", a number that identifies this label uniquely among + all the labels in the compilation (not just in the current + function). Ultimately, the label is represented in the assembler + output as an assembler label, usually of the form `LN' where N is + the label number. + + When a `code_label' appears in an RTL expression, it normally + appears within a `label_ref' which represents the address of the + label, as a number. + + The field `LABEL_NUSES' is only defined once the jump optimization + phase is completed and contains the number of times this label is + referenced in the current function. + +`barrier' + Barriers are placed in the instruction stream when control cannot + flow past them. They are placed after unconditional jump + instructions to indicate that the jumps are unconditional and + after calls to `volatile' functions, which do not return (e.g., + `exit'). They contain no information beyond the three standard + fields. + +`note' + `note' insns are used to represent additional debugging and + declarative information. They contain two nonstandard fields, an + integer which is accessed with the macro `NOTE_LINE_NUMBER' and a + string accessed with `NOTE_SOURCE_FILE'. + + If `NOTE_LINE_NUMBER' is positive, the note represents the + position of a source line and `NOTE_SOURCE_FILE' is the source + file name that the line came from. These notes control generation + of line number data in the assembler output. + + Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a + code with one of the following values (and `NOTE_SOURCE_FILE' must + contain a null pointer): + + `NOTE_INSN_DELETED' + Such a note is completely ignorable. Some passes of the + compiler delete insns by altering them into notes of this + kind. + + `NOTE_INSN_BLOCK_BEG' + `NOTE_INSN_BLOCK_END' + These types of notes indicate the position of the beginning + and end of a level of scoping of variable names. They + control the output of debugging information. + + `NOTE_INSN_LOOP_BEG' + `NOTE_INSN_LOOP_END' + These types of notes indicate the position of the beginning + and end of a `while' or `for' loop. They enable the loop + optimizer to find loops quickly. + + `NOTE_INSN_LOOP_CONT' + Appears at the place in a loop that `continue' statements + jump to. + + `NOTE_INSN_LOOP_VTOP' + This note indicates the place in a loop where the exit test + begins for those loops in which the exit test has been + duplicated. This position becomes another virtual start of + the loop when considering loop invariants. + + `NOTE_INSN_FUNCTION_END' + Appears near the end of the function body, just before the + label that `return' statements jump to (on machine where a + single instruction does not suffice for returning). This + note may be deleted by jump optimization. + + `NOTE_INSN_SETJMP' + Appears following each call to `setjmp' or a related function. + + These codes are printed symbolically when they appear in debugging + dumps. + + The machine mode of an insn is normally `VOIDmode', but some phases +use the mode for various purposes; for example, the reload pass sets it +to `HImode' if the insn needs reloading but not register elimination +and `QImode' if both are required. The common subexpression +elimination pass sets the mode of an insn to `QImode' when it is the +first insn in a block that has already been processed. + + Here is a table of the extra fields of `insn', `jump_insn' and +`call_insn' insns: + +`PATTERN (I)' + An expression for the side effect performed by this insn. This + must be one of the following codes: `set', `call', `use', + `clobber', `return', `asm_input', `asm_output', `addr_vec', + `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', + `parallel', or `sequence'. If it is a `parallel', each element of + the `parallel' must be one these codes, except that `parallel' + expressions cannot be nested and `addr_vec' and `addr_diff_vec' + are not permitted inside a `parallel' expression. + +`INSN_CODE (I)' + An integer that says which pattern in the machine description + matches this insn, or -1 if the matching has not yet been + attempted. + + Such matching is never attempted and this field remains -1 on an + insn whose pattern consists of a single `use', `clobber', + `asm_input', `addr_vec' or `addr_diff_vec' expression. + + Matching is also never attempted on insns that result from an `asm' + statement. These contain at least one `asm_operands' expression. + The function `asm_noperands' returns a non-negative value for such + insns. + + In the debugging output, this field is printed as a number + followed by a symbolic representation that locates the pattern in + the `md' file as some small positive or negative offset from a + named pattern. + +`LOG_LINKS (I)' + A list (chain of `insn_list' expressions) giving information about + dependencies between instructions within a basic block. Neither a + jump nor a label may come between the related insns. + +`REG_NOTES (I)' + A list (chain of `expr_list' and `insn_list' expressions) giving + miscellaneous information about the insn. It is often information + pertaining to the registers used in this insn. + + The `LOG_LINKS' field of an insn is a chain of `insn_list' +expressions. Each of these has two operands: the first is an insn, and +the second is another `insn_list' expression (the next one in the +chain). The last `insn_list' in the chain has a null pointer as second +operand. The significant thing about the chain is which insns appear +in it (as first operands of `insn_list' expressions). Their order is +not significant. + + This list is originally set up by the flow analysis pass; it is a +null pointer until then. Flow only adds links for those data +dependencies which can be used for instruction combination. For each +insn, the flow analysis pass adds a link to insns which store into +registers values that are used for the first time in this insn. The +instruction scheduling pass adds extra links so that every dependence +will be represented. Links represent data dependencies, +antidependencies and output dependencies; the machine mode of the link +distinguishes these three types: antidependencies have mode +`REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and +data dependencies have mode `VOIDmode'. + + The `REG_NOTES' field of an insn is a chain similar to the +`LOG_LINKS' field but it includes `expr_list' expressions in addition +to `insn_list' expressions. There are several kinds of register notes, +which are distinguished by the machine mode, which in a register note +is really understood as being an `enum reg_note'. The first operand OP +of the note is data whose meaning depends on the kind of note. + + The macro `REG_NOTE_KIND (X)' returns the kind of register note. +Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the +register note type of X to be NEWKIND. + + Register notes are of three classes: They may say something about an +input to an insn, they may say something about an output of an insn, or +they may create a linkage between two insns. There are also a set of +values that are only used in `LOG_LINKS'. + + These register notes annotate inputs to an insn: + +`REG_DEAD' + The value in OP dies in this insn; that is to say, altering the + value immediately after this insn would not affect the future + behavior of the program. + + This does not necessarily mean that the register OP has no useful + value after this insn since it may also be an output of the insn. + In such a case, however, a `REG_DEAD' note would be redundant and + is usually not present until after the reload pass, but no code + relies on this fact. + +`REG_INC' + The register OP is incremented (or decremented; at this level + there is no distinction) by an embedded side effect inside this + insn. This means it appears in a `post_inc', `pre_inc', + `post_dec' or `pre_dec' expression. + +`REG_NONNEG' + The register OP is known to have a nonnegative value when this + insn is reached. This is used so that decrement and branch until + zero instructions, such as the m68k dbra, can be matched. + + The `REG_NONNEG' note is added to insns only if the machine + description has a `decrement_and_branch_until_zero' pattern. + +`REG_NO_CONFLICT' + This insn does not cause a conflict between OP and the item being + set by this insn even though it might appear that it does. In + other words, if the destination register and OP could otherwise be + assigned the same register, this insn does not prevent that + assignment. + + Insns with this note are usually part of a block that begins with a + `clobber' insn specifying a multi-word pseudo register (which will + be the output of the block), a group of insns that each set one + word of the value and have the `REG_NO_CONFLICT' note attached, + and a final insn that copies the output to itself with an attached + `REG_EQUAL' note giving the expression being computed. This block + is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the + first and last insns, respectively. + +`REG_LABEL' + This insn uses OP, a `code_label', but is not a `jump_insn'. The + presence of this note allows jump optimization to be aware that OP + is, in fact, being used. + + The following notes describe attributes of outputs of an insn: + +`REG_EQUIV' +`REG_EQUAL' + This note is only valid on an insn that sets only one register and + indicates that that register will be equal to OP at run time; the + scope of this equivalence differs between the two types of notes. + The value which the insn explicitly copies into the register may + look different from OP, but they will be equal at run time. If the + output of the single `set' is a `strict_low_part' expression, the + note refers to the register that is contained in `SUBREG_REG' of + the `subreg' expression. + + For `REG_EQUIV', the register is equivalent to OP throughout the + entire function, and could validly be replaced in all its + occurrences by OP. ("Validly" here refers to the data flow of the + program; simple replacement may make some insns invalid.) For + example, when a constant is loaded into a register that is never + assigned any other value, this kind of note is used. + + When a parameter is copied into a pseudo-register at entry to a + function, a note of this kind records that the register is + equivalent to the stack slot where the parameter was passed. + Although in this case the register may be set by other insns, it + is still valid to replace the register by the stack slot + throughout the function. + + In the case of `REG_EQUAL', the register that is set by this insn + will be equal to OP at run time at the end of this insn but not + necessarily elsewhere in the function. In this case, OP is + typically an arithmetic expression. For example, when a sequence + of insns such as a library call is used to perform an arithmetic + operation, this kind of note is attached to the insn that produces + or copies the final value. + + These two notes are used in different ways by the compiler passes. + `REG_EQUAL' is used by passes prior to register allocation (such as + common subexpression elimination and loop optimization) to tell + them how to think of that value. `REG_EQUIV' notes are used by + register allocation to indicate that there is an available + substitute expression (either a constant or a `mem' expression for + the location of a parameter on the stack) that may be used in + place of a register if insufficient registers are available. + + Except for stack homes for parameters, which are indicated by a + `REG_EQUIV' note and are not useful to the early optimization + passes and pseudo registers that are equivalent to a memory + location throughout there entire life, which is not detected until + later in the compilation, all equivalences are initially indicated + by an attached `REG_EQUAL' note. In the early stages of register + allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note + if OP is a constant and the insn represents the only set of its + destination register. + + Thus, compiler passes prior to register allocation need only check + for `REG_EQUAL' notes and passes subsequent to register allocation + need only check for `REG_EQUIV' notes. + +`REG_UNUSED' + The register OP being set by this insn will not be used in a + subsequent insn. This differs from a `REG_DEAD' note, which + indicates that the value in an input will not be used subsequently. + These two notes are independent; both may be present for the same + register. + +`REG_WAS_0' + The single output of this insn contained zero before this insn. + OP is the insn that set it to zero. You can rely on this note if + it is present and OP has not been deleted or turned into a `note'; + its absence implies nothing. + + These notes describe linkages between insns. They occur in pairs: +one insn has one of a pair of notes that points to a second insn, which +has the inverse note pointing back to the first insn. + +`REG_RETVAL' + This insn copies the value of a multi-insn sequence (for example, a + library call), and OP is the first insn of the sequence (for a + library call, the first insn that was generated to set up the + arguments for the library call). + + Loop optimization uses this note to treat such a sequence as a + single operation for code motion purposes and flow analysis uses + this note to delete such sequences whose results are dead. + + A `REG_EQUAL' note will also usually be attached to this insn to + provide the expression being computed by the sequence. + +`REG_LIBCALL' + This is the inverse of `REG_RETVAL': it is placed on the first + insn of a multi-insn sequence, and it points to the last one. + +`REG_CC_SETTER' +`REG_CC_USER' + On machines that use `cc0', the insns which set and use `cc0' set + and use `cc0' are adjacent. However, when branch delay slot + filling is done, this may no longer be true. In this case a + `REG_CC_USER' note will be placed on the insn setting `cc0' to + point to the insn using `cc0' and a `REG_CC_SETTER' note will be + placed on the insn using `cc0' to point to the insn setting `cc0'. + + These values are only used in the `LOG_LINKS' field, and indicate +the type of dependency that each link represents. Links which indicate +a data dependence (a read after write dependence) do not use any code, +they simply have mode `VOIDmode', and are printed without any +descriptive text. + +`REG_DEP_ANTI' + This indicates an anti dependence (a write after read dependence). + +`REG_DEP_OUTPUT' + This indicates an output dependence (a write after write + dependence). + + For convenience, the machine mode in an `insn_list' or `expr_list' +is printed using these symbolic codes in debugging dumps. + + The only difference between the expression codes `insn_list' and +`expr_list' is that the first operand of an `insn_list' is assumed to +be an insn and is printed in debugging dumps as the insn's unique id; +the first operand of an `expr_list' is printed in the ordinary way as +an expression.  -File: gcc.info, Node: Stack and Calling, Next: Varargs, Prev: Register Classes, Up: Target Macros - -Describing Stack Layout and Calling Conventions -=============================================== +File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL -* Menu: +RTL Representation of Function-Call Insns +========================================= -* Frame Layout:: -* Frame Registers:: -* Elimination:: -* Stack Arguments:: -* Register Arguments:: -* Scalar Return:: -* Aggregate Return:: -* Caller Saves:: -* Function Entry:: -* Profiling:: + Insns that call subroutines have the RTL expression code `call_insn'. +These insns must satisfy special rules, and their bodies must use a +special RTL expression code, `call'. + + A `call' expression has two operands, as follows: + + (call (mem:FM ADDR) NBYTES) + +Here NBYTES is an operand that represents the number of bytes of +argument data being passed to the subroutine, FM is a machine mode +(which must equal as the definition of the `FUNCTION_MODE' macro in the +machine description) and ADDR represents the address of the subroutine. + + For a subroutine that returns no value, the `call' expression as +shown above is the entire body of the insn, except that the insn might +also contain `use' or `clobber' expressions. + + For a subroutine that returns a value whose mode is not `BLKmode', +the value is returned in a hard register. If this register's number is +R, then the body of the call insn looks like this: + + (set (reg:M R) + (call (mem:FM ADDR) NBYTES)) + +This RTL expression makes it clear (to the optimizer passes) that the +appropriate register receives a useful value in this insn. + + When a subroutine returns a `BLKmode' value, it is handled by +passing to the subroutine the address of a place to store the value. +So the call insn itself does not "return" any value, and it has the +same RTL form as a call that returns nothing. + + On some machines, the call instruction itself clobbers some register, +for example to contain the return address. `call_insn' insns on these +machines should have a body which is a `parallel' that contains both +the `call' expression and `clobber' expressions that indicate which +registers are destroyed. Similarly, if the call instruction requires +some register other than the stack pointer that is not explicitly +mentioned it its RTL, a `use' subexpression should mention that +register. + + Functions that are called are assumed to modify all registers listed +in the configuration macro `CALL_USED_REGISTERS' (*note Register +Basics::.) and, with the exception of `const' functions and library +calls, to modify all of memory. + + Insns containing just `use' expressions directly precede the +`call_insn' insn to indicate which registers contain inputs to the +function. Similarly, if registers other than those in +`CALL_USED_REGISTERS' are clobbered by the called function, insns +containing a single `clobber' follow immediately after the call to +indicate which registers.  -File: gcc.info, Node: Frame Layout, Next: Frame Registers, Up: Stack and Calling +File: gcc.info, Node: Sharing, Next: Reading RTL, Prev: Calls, Up: RTL -Basic Stack Layout ------------------- +Structure Sharing Assumptions +============================= -`STACK_GROWS_DOWNWARD' - Define this macro if pushing a word onto the stack moves the stack - pointer to a smaller address. - - When we say, "define this macro if ...," it means that the - compiler checks this macro only with `#ifdef' so the precise - definition used does not matter. - -`FRAME_GROWS_DOWNWARD' - Define this macro if the addresses of local variable slots are at - negative offsets from the frame pointer. - -`ARGS_GROW_DOWNWARD' - Define this macro if successive arguments to a function occupy - decreasing addresses on the stack. - -`STARTING_FRAME_OFFSET' - Offset from the frame pointer to the first local variable slot to - be allocated. - - If `FRAME_GROWS_DOWNWARD', the next slot's offset is found by - subtracting the length of the first slot from - `STARTING_FRAME_OFFSET'. Otherwise, it is found by adding the - length of the first slot to the value `STARTING_FRAME_OFFSET'. - -`STACK_POINTER_OFFSET' - Offset from the stack pointer register to the first location at - which outgoing arguments are placed. If not specified, the - default value of zero is used. This is the proper value for most - machines. - - If `ARGS_GROW_DOWNWARD', this is the offset to the location above - the first location at which outgoing arguments are placed. - -`FIRST_PARM_OFFSET (FUNDECL)' - Offset from the argument pointer register to the first argument's - address. On some machines it may depend on the data type of the - function. - - If `ARGS_GROW_DOWNWARD', this is the offset to the location above - the first argument's address. - -`STACK_DYNAMIC_OFFSET (FUNDECL)' - Offset from the stack pointer register to an item dynamically - allocated on the stack, e.g., by `alloca'. - - The default value for this macro is `STACK_POINTER_OFFSET' plus the - length of the outgoing arguments. The default is correct for most - machines. See `function.c' for details. - -`DYNAMIC_CHAIN_ADDRESS (FRAMEADDR)' - A C expression whose value is RTL representing the address in a - stack frame where the pointer to the caller's frame is stored. - Assume that FRAMEADDR is an RTL expression for the address of the - stack frame itself. - - If you don't define this macro, the default is to return the value - of FRAMEADDR--that is, the stack frame address is also the address - of the stack word that points to the previous frame. + The compiler assumes that certain kinds of RTL expressions are +unique; there do not exist two distinct objects representing the same +value. In other cases, it makes an opposite assumption: that no RTL +expression object of a certain kind appears in more than one place in +the containing structure. + + These assumptions refer to a single function; except for the RTL +objects that describe global variables and external functions, and a +few standard objects such as small integer constants, no RTL objects +are common to two functions. + + * Each pseudo-register has only a single `reg' object to represent + it, and therefore only a single machine mode. + + * For any symbolic label, there is only one `symbol_ref' object + referring to it. + + * There is only one `const_int' expression with value 0, only one + with value 1, and only one with value -1. Some other integer + values are also stored uniquely. + + * There is only one `pc' expression. + + * There is only one `cc0' expression. + + * There is only one `const_double' expression with value 0 for each + floating point mode. Likewise for values 1 and 2. + + * No `label_ref' or `scratch' appears in more than one place in the + RTL structure; in other words, it is safe to do a tree-walk of all + the insns in the function and assume that each time a `label_ref' + or `scratch' is seen it is distinct from all others that are seen. + + * Only one `mem' object is normally created for each static variable + or stack slot, so these objects are frequently shared in all the + places they appear. However, separate but equal objects for these + variables are occasionally made. + + * When a single `asm' statement has multiple output operands, a + distinct `asm_operands' expression is made for each output operand. + However, these all share the vector which contains the sequence of + input operands. This sharing is used later on to test whether two + `asm_operands' expressions come from the same statement, so all + optimizations must carefully preserve the sharing if they copy the + vector at all. + + * No RTL object appears in more than one place in the RTL structure + except as described above. Many passes of the compiler rely on + this by assuming that they can modify RTL objects in place without + unwanted side-effects on other insns. + + * During initial RTL generation, shared structure is freely + introduced. After all the RTL for a function has been generated, + all shared structure is copied by `unshare_all_rtl' in + `emit-rtl.c', after which the above rules are guaranteed to be + followed. + + * During the combiner pass, shared structure within an insn can exist + temporarily. However, the shared structure is copied before the + combiner is finished with the insn. This is done by calling + `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'.  -File: gcc.info, Node: Frame Registers, Next: Elimination, Prev: Frame Layout, Up: Stack and Calling +File: gcc.info, Node: Reading RTL, Prev: Sharing, Up: RTL -Registers That Address the Stack Frame --------------------------------------- +Reading RTL +=========== -`STACK_POINTER_REGNUM' - The register number of the stack pointer register, which must also - be a fixed register according to `FIXED_REGISTERS'. On most - machines, the hardware determines which register this is. - -`FRAME_POINTER_REGNUM' - The register number of the frame pointer register, which is used to - access automatic variables in the stack frame. On some machines, - the hardware determines which register this is. On other - machines, you can choose any register you wish for this purpose. - -`ARG_POINTER_REGNUM' - The register number of the arg pointer register, which is used to - access the function's argument list. On some machines, this is - the same as the frame pointer register. On some machines, the - hardware determines which register this is. On other machines, - you can choose any register you wish for this purpose. If this is - not the same register as the frame pointer register, then you must - mark it as a fixed register according to `FIXED_REGISTERS', or - arrange to be able to eliminate it (*note Elimination::.). - -`STATIC_CHAIN_REGNUM' -`STATIC_CHAIN_INCOMING_REGNUM' - Register numbers used for passing a function's static chain - pointer. If register windows are used, - `STATIC_CHAIN_INCOMING_REGNUM' is the register number as seen by - the called function, while `STATIC_CHAIN_REGNUM' is the register - number as seen by the calling function. If these registers are - the same, `STATIC_CHAIN_INCOMING_REGNUM' need not be defined. - - The static chain register need not be a fixed register. - - If the static chain is passed in memory, these macros should not be - defined; instead, the next two macros should be defined. - -`STATIC_CHAIN' -`STATIC_CHAIN_INCOMING' - If the static chain is passed in memory, these macros provide rtx - giving `mem' expressions that denote where they are stored. - `STATIC_CHAIN' and `STATIC_CHAIN_INCOMING' give the locations as - seen by the calling and called functions, respectively. Often the - former will be at an offset from the stack pointer and the latter - at an offset from the frame pointer. - - The variables `stack_pointer_rtx', `frame_pointer_rtx', and - `arg_pointer_rtx' will have been initialized prior to the use of - these macros and should be used to refer to those items. + To read an RTL object from a file, call `read_rtx'. It takes one +argument, a stdio stream, and returns a single RTL object. - If the static chain is passed in a register, the two previous - macros should be defined instead. + Reading RTL from a file is very slow. This is no currently not a +problem because reading RTL occurs only as part of building the +compiler. - -File: gcc.info, Node: Elimination, Next: Stack Arguments, Prev: Frame Registers, Up: Stack and Calling + People frequently have the idea of using RTL stored as text in a +file as an interface between a language front end and the bulk of GNU +CC. This idea is not feasible. -Eliminating Frame Pointer and Arg Pointer ------------------------------------------ + GNU CC was designed to use RTL internally only. Correct RTL for a +given program is very dependent on the particular target machine. And +the RTL does not contain all the information about the program. -`FRAME_POINTER_REQUIRED' - A C expression which is nonzero if a function must have and use a - frame pointer. This expression is evaluated in the reload pass. - If its value is nonzero the function will have a frame pointer. - - The expression can in principle examine the current function and - decide according to the facts, but on most machines the constant 0 - or the constant 1 suffices. Use 0 when the machine allows code to - be generated with no frame pointer, and doing so saves some time - or space. Use 1 when there is no possible advantage to avoiding a - frame pointer. - - In certain cases, the compiler does not know how to produce valid - code without a frame pointer. The compiler recognizes those cases - and automatically gives the function a frame pointer regardless of - what `FRAME_POINTER_REQUIRED' says. You don't need to worry about - them. - - In a function that does not require a frame pointer, the frame - pointer register can be allocated for ordinary usage, unless you - mark it as a fixed register. See `FIXED_REGISTERS' for more - information. - - This macro is ignored and need not be defined if `ELIMINABLE_REGS' - is defined. - -`INITIAL_FRAME_POINTER_OFFSET (DEPTH-VAR)' - A C statement to store in the variable DEPTH-VAR the difference - between the frame pointer and the stack pointer values immediately - after the function prologue. The value would be computed from - information such as the result of `get_frame_size ()' and the - tables of registers `regs_ever_live' and `call_used_regs'. - - If `ELIMINABLE_REGS' is defined, this macro will be not be used and - need not be defined. Otherwise, it must be defined even if - `FRAME_POINTER_REQUIRED' is defined to always be true; in that - case, you may set DEPTH-VAR to anything. - -`ELIMINABLE_REGS' - If defined, this macro specifies a table of register pairs used to - eliminate unneeded registers that point into the stack frame. If - it is not defined, the only elimination attempted by the compiler - is to replace references to the frame pointer with references to - the stack pointer. - - The definition of this macro is a list of structure - initializations, each of which specifies an original and - replacement register. - - On some machines, the position of the argument pointer is not - known until the compilation is completed. In such a case, a - separate hard register must be used for the argument pointer. - This register can be eliminated by replacing it with either the - frame pointer or the argument pointer, depending on whether or not - the frame pointer has been eliminated. - - In this case, you might specify: - #define ELIMINABLE_REGS \ - {{ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ - {ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \ - {FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}} - - Note that the elimination of the argument pointer with the stack - pointer is specified first since that is the preferred elimination. - -`CAN_ELIMINATE (FROM-REG, TO-REG)' - A C expression that returns non-zero if the compiler is allowed to - try to replace register number FROM-REG with register number - TO-REG. This macro need only be defined if `ELIMINABLE_REGS' is - defined, and will usually be the constant 1, since most of the - cases preventing register elimination are things that the compiler - already knows about. - -`INITIAL_ELIMINATION_OFFSET (FROM-REG, TO-REG, OFFSET-VAR)' - This macro is similar to `INITIAL_FRAME_POINTER_OFFSET'. It - specifies the initial difference between the specified pair of - registers. This macro must be defined if `ELIMINABLE_REGS' is - defined. - -`LONGJMP_RESTORE_FROM_STACK' - Define this macro if the `longjmp' function restores registers from - the stack frames, rather than from those saved specifically by - `setjmp'. Certain quantities must not be kept in registers across - a call to `setjmp' on such machines. + The proper way to interface GNU CC to a new language front end is +with the "tree" data structure. There is no manual for this data +structure, but it is described in the files `tree.h' and `tree.def'.  -File: gcc.info, Node: Stack Arguments, Next: Register Arguments, Prev: Elimination, Up: Stack and Calling +File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top -Passing Function Arguments on the Stack ---------------------------------------- +Machine Descriptions +******************** - The macros in this section control how arguments are passed on the -stack. See the following section for other macros that control passing -certain arguments in registers. - -`PROMOTE_PROTOTYPES' - Define this macro if an argument declared as `char' or `short' in - a prototype should actually be passed as an `int'. In addition to - avoiding errors in certain cases of mismatch, it also makes for - better code on certain machines. - -`PUSH_ROUNDING (NPUSHED)' - A C expression that is the number of bytes actually pushed onto the - stack when an instruction attempts to push NPUSHED bytes. - - If the target machine does not have a push instruction, do not - define this macro. That directs GNU CC to use an alternate - strategy: to allocate the entire argument block and then store the - arguments into it. - - On some machines, the definition - - #define PUSH_ROUNDING(BYTES) (BYTES) - - will suffice. But on other machines, instructions that appear to - push one byte actually push two bytes in an attempt to maintain - alignment. Then the definition should be - - #define PUSH_ROUNDING(BYTES) (((BYTES) + 1) & ~1) - -`ACCUMULATE_OUTGOING_ARGS' - If defined, the maximum amount of space required for outgoing - arguments will be computed and placed into the variable - `current_function_outgoing_args_size'. No space will be pushed - onto the stack for each call; instead, the function prologue should - increase the stack frame size by this amount. - - It is not proper to define both `PUSH_ROUNDING' and - `ACCUMULATE_OUTGOING_ARGS'. - -`REG_PARM_STACK_SPACE (FNDECL)' - Define this macro if functions should assume that stack space has - been allocated for arguments even when their values are passed in - registers. - - The value of this macro is the size, in bytes, of the area - reserved for ! arguments passed in registers for the function - represented by FNDECL. - - This space can either be allocated by the caller or be a part of - the machine-dependent stack frame: `OUTGOING_REG_PARM_STACK_SPACE' - says which. - -`MAYBE_REG_PARM_STACK_SPACE' -`FINAL_REG_PARM_STACK_SPACE (CONST_SIZE, VAR_SIZE)' - Define these macros in addition to the one above if functions might - allocate stack space for arguments even when their values are - passed in registers. These should be used when the stack space - allocated for arguments in registers is not a simple constant - independent of the function declaration. - - The value of the first macro is the size, in bytes, of the area - that we should initially assume would be reserved for arguments - passed in registers. - - The value of the second macro is the actual size, in bytes, of the - area that will be reserved for arguments passed in registers. - This takes two arguments: an integer representing the number of - bytes of fixed sized arguments on the stack, and a tree - representing the number of bytes of variable sized arguments on - the stack. - - When these macros are defined, `REG_PARM_STACK_SPACE' will only be - called for libcall functions, the current function, or for a - function being called when it is known that such stack space must - be allocated. In each case this value can be easily computed. - - When deciding whether a called function needs such stack space, - and how much space to reserve, GNU CC uses these two macros - instead of `REG_PARM_STACK_SPACE'. - -`OUTGOING_REG_PARM_STACK_SPACE' - Define this if it is the responsibility of the caller to allocate - the area reserved for arguments passed in registers. - - If `ACCUMULATE_OUTGOING_ARGS' is defined, this macro controls - whether the space for these arguments counts in the value of - `current_function_outgoing_args_size'. - -`STACK_PARMS_IN_REG_PARM_AREA' - Define this macro if `REG_PARM_STACK_SPACE' is defined but stack - parameters don't skip the area specified by `REG_PARM_STACK_SPACE'. - - Normally, when a parameter is not passed in registers, it is - placed on the stack beyond the `REG_PARM_STACK_SPACE' area. - Defining this macro suppresses this behavior and causes the - parameter to be passed on the stack in its natural location. - -`RETURN_POPS_ARGS (FUNTYPE, STACK-SIZE)' - A C expression that should indicate the number of bytes of its own - arguments that a function pops on returning, or 0 if the function - pops no arguments and the caller must therefore pop them all after - the function returns. - - FUNTYPE is a C variable whose value is a tree node that describes - the function in question. Normally it is a node of type - `FUNCTION_TYPE' that describes the data type of the function. From - this it is possible to obtain the data types of the value and - arguments (if known). - - When a call to a library function is being considered, FUNTYPE - will contain an identifier node for the library function. Thus, if - you need to distinguish among various library functions, you can - do so by their names. Note that "library function" in this - context means a function used to perform arithmetic, whose name is - known specially in the compiler and was not mentioned in the C - code being compiled. - - STACK-SIZE is the number of bytes of arguments passed on the - stack. If a variable number of bytes is passed, it is zero, and - argument popping will always be the responsibility of the calling - function. - - On the Vax, all functions always pop their arguments, so the - definition of this macro is STACK-SIZE. On the 68000, using the - standard calling convention, no functions pop their arguments, so - the value of the macro is always 0 in this case. But an - alternative calling convention is available in which functions - that take a fixed number of arguments pop them but other functions - (such as `printf') pop nothing (the caller pops all). When this - convention is in use, FUNTYPE is examined to determine whether a - function takes a fixed number of arguments. + A machine description has two parts: a file of instruction patterns +(`.md' file) and a C header file of macro definitions. - -File: gcc.info, Node: Register Arguments, Next: Scalar Return, Prev: Stack Arguments, Up: Stack and Calling + The `.md' file for a target machine contains a pattern for each +instruction that the target machine supports (or at least each +instruction that is worth telling the compiler about). It may also +contain comments. A semicolon causes the rest of the line to be a +comment, unless the semicolon is inside a quoted string. + + See the next chapter for information on the C header file. -Passing Arguments in Registers ------------------------------- +* Menu: - This section describes the macros which let you control how various -types of arguments are passed in registers or how they are arranged in -the stack. - -`FUNCTION_ARG (CUM, MODE, TYPE, NAMED)' - A C expression that controls whether a function argument is passed - in a register, and which register. - - The arguments are CUM, which summarizes all the previous - arguments; MODE, the machine mode of the argument; TYPE, the data - type of the argument as a tree node or 0 if that is not known - (which happens for C support library functions); and NAMED, which - is 1 for an ordinary argument and 0 for nameless arguments that - correspond to `...' in the called function's prototype. - - The value of the expression should either be a `reg' RTX for the - hard register in which to pass the argument, or zero to pass the - argument on the stack. - - For machines like the Vax and 68000, where normally all arguments - are pushed, zero suffices as a definition. - - The usual way to make the ANSI library `stdarg.h' work on a machine - where some arguments are usually passed in registers, is to cause - nameless arguments to be passed on the stack instead. This is done - by making `FUNCTION_ARG' return 0 whenever NAMED is 0. - - You may use the macro `MUST_PASS_IN_STACK (MODE, TYPE)' in the - definition of this macro to determine if this argument is of a - type that must be passed in the stack. If `REG_PARM_STACK_SPACE' - is not defined and `FUNCTION_ARG' returns non-zero for such an - argument, the compiler will abort. If `REG_PARM_STACK_SPACE' is - defined, the argument will be computed in the stack and then - loaded into a register. - -`FUNCTION_INCOMING_ARG (CUM, MODE, TYPE, NAMED)' - Define this macro if the target machine has "register windows", so - that the register in which a function sees an arguments is not - necessarily the same as the one in which the caller passed the - argument. - - For such machines, `FUNCTION_ARG' computes the register in which - the caller passes the value, and `FUNCTION_INCOMING_ARG' should be - defined in a similar fashion to tell the function being called - where the arguments will arrive. - - If `FUNCTION_INCOMING_ARG' is not defined, `FUNCTION_ARG' serves - both purposes. - -`FUNCTION_ARG_PARTIAL_NREGS (CUM, MODE, TYPE, NAMED)' - A C expression for the number of words, at the beginning of an - argument, must be put in registers. The value must be zero for - arguments that are passed entirely in registers or that are - entirely pushed on the stack. - - On some machines, certain arguments must be passed partially in - registers and partially in memory. On these machines, typically - the first N words of arguments are passed in registers, and the - rest on the stack. If a multi-word argument (a `double' or a - structure) crosses that boundary, its first few words must be - passed in registers and the rest must be pushed. This macro tells - the compiler when this occurs, and how many of the words should go - in registers. - - `FUNCTION_ARG' for these arguments should return the first - register to be used by the caller for this argument; likewise - `FUNCTION_INCOMING_ARG', for the called function. - -`FUNCTION_ARG_PASS_BY_REFERENCE (CUM, MODE, TYPE, NAMED)' - A C expression that indicates when an argument must be passed by - reference. If nonzero for an argument, a copy of that argument is - made in memory and a pointer to the argument is passed instead of - the argument itself. The pointer is passed in whatever way is - appropriate for passing a pointer to that type. - - On machines where `REG_PARM_STACK_SPACE' is not defined, a suitable - definition of this macro might be - #define FUNCTION_ARG_PASS_BY_REFERENCE(CUM, MODE, TYPE, NAMED) \ - MUST_PASS_IN_STACK (MODE, TYPE) - -`CUMULATIVE_ARGS' - A C type for declaring a variable that is used as the first - argument of `FUNCTION_ARG' and other related values. For some - target machines, the type `int' suffices and can hold the number - of bytes of argument so far. - - There is no need to record in `CUMULATIVE_ARGS' anything about the - arguments that have been passed on the stack. The compiler has - other variables to keep track of that. For target machines on - which all arguments are passed on the stack, there is no need to - store anything in `CUMULATIVE_ARGS'; however, the data structure - must exist and should not be empty, so use `int'. - -`INIT_CUMULATIVE_ARGS (CUM, FNTYPE, LIBNAME)' - A C statement (sans semicolon) for initializing the variable CUM - for the state at the beginning of the argument list. The variable - has type `CUMULATIVE_ARGS'. The value of FNTYPE is the tree node - for the data type of the function which will receive the args, or 0 - if the args are to a compiler support library function. - - When processing a call to a compiler support library function, - LIBNAME identifies which one. It is a `symbol_ref' rtx which - contains the name of the function, as a string. LIBNAME is 0 when - an ordinary C function call is being processed. Thus, each time - this macro is called, either LIBNAME or FNTYPE is nonzero, but - never both of them at once. - -`INIT_CUMULATIVE_INCOMING_ARGS (CUM, FNTYPE, LIBNAME)' - Like `INIT_CUMULATIVE_ARGS' but overrides it for the purposes of - finding the arguments for the function being compiled. If this - macro is undefined, `INIT_CUMULATIVE_ARGS' is used instead. - - The argument LIBNAME exists for symmetry with - `INIT_CUMULATIVE_ARGS'. The value passed for LIBNAME is always 0, - since library routines with special calling conventions are never - compiled with GNU CC. - -`FUNCTION_ARG_ADVANCE (CUM, MODE, TYPE, NAMED)' - A C statement (sans semicolon) to update the summarizer variable - CUM to advance past an argument in the argument list. The values - MODE, TYPE and NAMED describe that argument. Once this is done, - the variable CUM is suitable for analyzing the *following* - argument with `FUNCTION_ARG', etc. - - This macro need not do anything if the argument in question was - passed on the stack. The compiler knows how to track the amount - of stack space used for arguments without any special help. - -`FUNCTION_ARG_PADDING (MODE, TYPE)' - If defined, a C expression which determines whether, and in which - direction, to pad out an argument with extra space. The value - should be of type `enum direction': either `upward' to pad above - the argument, `downward' to pad below, or `none' to inhibit - padding. - - This macro does not control the *amount* of padding; that is - always just enough to reach the next multiple of - `FUNCTION_ARG_BOUNDARY'. - - This macro has a default definition which is right for most - systems. For little-endian machines, the default is to pad upward. - For big-endian machines, the default is to pad downward for an - argument of constant size shorter than an `int', and upward - otherwise. - -`FUNCTION_ARG_BOUNDARY (MODE, TYPE)' - If defined, a C expression that gives the alignment boundary, in - bits, of an argument with the specified mode and type. If it is - not defined, `PARM_BOUNDARY' is used for all arguments. - -`FUNCTION_ARG_REGNO_P (REGNO)' - A C expression that is nonzero if REGNO is the number of a hard - register in which function arguments are sometimes passed. This - does *not* include implicit arguments such as the static chain and - the structure-value address. On many machines, no registers can be - used for this purpose since all function arguments are pushed on - the stack. +* Patterns:: How to write instruction patterns. +* Example:: An explained example of a `define_insn' pattern. +* RTL Template:: The RTL template defines what insns match a pattern. +* Output Template:: The output template says how to make assembler code + from such an insn. +* Output Statement:: For more generality, write C code to output + the assembler code. +* Constraints:: When not all operands are general operands. +* Standard Names:: Names mark patterns to use for code generation. +* Pattern Ordering:: When the order of patterns makes a difference. +* Dependent Patterns:: Having one pattern may make you need another. +* Jump Patterns:: Special considerations for patterns for jump insns. +* Insn Canonicalizations::Canonicalization of Instructions +* Peephole Definitions::Defining machine-specific peephole optimizations. +* Expander Definitions::Generating a sequence of several RTL insns + for a standard operation. +* Insn Splitting:: Splitting Instructions into Multiple Instructions +* Insn Attributes:: Specifying the value of attributes for generated insns.  -File: gcc.info, Node: Scalar Return, Next: Aggregate Return, Prev: Register Arguments, Up: Stack and Calling +File: gcc.info, Node: Patterns, Next: Example, Up: Machine Desc + +Everything about Instruction Patterns +===================================== -How Scalar Function Values Are Returned ---------------------------------------- + Each instruction pattern contains an incomplete RTL expression, with +pieces to be filled in later, operand constraints that restrict how the +pieces can be filled in, and an output pattern or C code to generate +the assembler output, all wrapped up in a `define_insn' expression. + + A `define_insn' is an RTL expression containing four or five +operands: + + 1. An optional name. The presence of a name indicate that this + instruction pattern can perform a certain standard job for the + RTL-generation pass of the compiler. This pass knows certain + names and will use the instruction patterns with those names, if + the names are defined in the machine description. + + The absence of a name is indicated by writing an empty string + where the name should go. Nameless instruction patterns are never + used for generating RTL code, but they may permit several simpler + insns to be combined later on. + + Names that are not thus known and used in RTL-generation have no + effect; they are equivalent to no name at all. + + 2. The "RTL template" (*note RTL Template::.) is a vector of + incomplete RTL expressions which show what the instruction should + look like. It is incomplete because it may contain + `match_operand', `match_operator', and `match_dup' expressions + that stand for operands of the instruction. + + If the vector has only one element, that element is the template + for the instruction pattern. If the vector has multiple elements, + then the instruction pattern is a `parallel' expression containing + the elements described. + + 3. A condition. This is a string which contains a C expression that + is the final test to decide whether an insn body matches this + pattern. + + For a named pattern, the condition (if present) may not depend on + the data in the insn being matched, but only the + target-machine-type flags. The compiler needs to test these + conditions during initialization in order to learn exactly which + named instructions are available in a particular run. + + For nameless patterns, the condition is applied only when matching + an individual insn, and only after the insn has matched the + pattern's recognition template. The insn's operands may be found + in the vector `operands'. + + 4. The "output template": a string that says how to output matching + insns as assembler code. `%' in this string specifies where to + substitute the value of an operand. *Note Output Template::. - This section discusses the macros that control returning scalars as -values--values that can fit in registers. + When simple substitution isn't general enough, you can specify a + piece of C code to compute the output. *Note Output Statement::. -`TRADITIONAL_RETURN_FLOAT' - Define this macro if `-traditional' should not cause functions - declared to return `float' to convert the value to `double'. - -`FUNCTION_VALUE (VALTYPE, FUNC)' - A C expression to create an RTX representing the place where a - function returns a value of data type VALTYPE. VALTYPE is a tree - node representing a data type. Write `TYPE_MODE (VALTYPE)' to get - the machine mode used to represent that type. On many machines, - only the mode is relevant. (Actually, on most machines, scalar - values are returned in the same place regardless of mode). - - If the precise function being called is known, FUNC is a tree node - (`FUNCTION_DECL') for it; otherwise, FUNC is a null pointer. This - makes it possible to use a different value-returning convention - for specific functions when all their calls are known. - - `FUNCTION_VALUE' is not used for return vales with aggregate data - types, because these are returned in another way. See - `STRUCT_VALUE_REGNUM' and related macros, below. - -`FUNCTION_OUTGOING_VALUE (VALTYPE, FUNC)' - Define this macro if the target machine has "register windows" so - that the register in which a function returns its value is not the - same as the one in which the caller sees the value. - - For such machines, `FUNCTION_VALUE' computes the register in which - the caller will see the value, and `FUNCTION_OUTGOING_VALUE' - should be defined in a similar fashion to tell the function where - to put the value. - - If `FUNCTION_OUTGOING_VALUE' is not defined, `FUNCTION_VALUE' - serves both purposes. - - `FUNCTION_OUTGOING_VALUE' is not used for return vales with - aggregate data types, because these are returned in another way. - See `STRUCT_VALUE_REGNUM' and related macros, below. - -`LIBCALL_VALUE (MODE)' - A C expression to create an RTX representing the place where a - library function returns a value of mode MODE. If the precise - function being called is known, FUNC is a tree node - (`FUNCTION_DECL') for it; otherwise, FUNC is a null pointer. This - makes it possible to use a different value-returning convention - for specific functions when all their calls are known. - - Note that "library function" in this context means a compiler - support routine, used to perform arithmetic, whose name is known - specially by the compiler and was not mentioned in the C code being - compiled. - - The definition of `LIBRARY_VALUE' need not be concerned aggregate - data types, because none of the library functions returns such - types. - -`FUNCTION_VALUE_REGNO_P (REGNO)' - A C expression that is nonzero if REGNO is the number of a hard - register in which the values of called function may come back. - - A register whose use for returning values is limited to serving as - the second of a pair (for a value of type `double', say) need not - be recognized by this macro. So for most machines, this definition - suffices: - - #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0) - - If the machine has register windows, so that the caller and the - called function use different registers for the return value, this - macro should recognize only the caller's register numbers. + 5. Optionally, a vector containing the values of attributes for insns + matching this pattern. *Note Insn Attributes::.  -File: gcc.info, Node: Aggregate Return, Next: Caller Saves, Prev: Scalar Return, Up: Stack and Calling +File: gcc.info, Node: Example, Next: RTL Template, Prev: Patterns, Up: Machine Desc + +Example of `define_insn' +======================== -How Large Values Are Returned ------------------------------ + Here is an actual example of an instruction pattern, for the +68000/68020. - When a function value's mode is `BLKmode' (and in some other cases), -the value is not returned according to `FUNCTION_VALUE' (*note Scalar -Return::.). Instead, the caller passes the address of a block of -memory in which the value should be stored. This address is called the -"structure value address". - - This section describes how to control returning structure values in -memory. - -`RETURN_IN_MEMORY (TYPE)' - A C expression which can inhibit the returning of certain function - values in registers, based on the type of value. A nonzero value - says to return the function value in memory, just as large - structures are always returned. Here TYPE will be a C expression - of type `tree', representing the data type of the value. - - Note that values of mode `BLKmode' are returned in memory - regardless of this macro. Also, the option `-fpcc-struct-return' - takes effect regardless of this macro. On most systems, it is - possible to leave the macro undefined; this causes a default - definition to be used, whose value is the constant 0. - -`STRUCT_VALUE_REGNUM' - If the structure value address is passed in a register, then - `STRUCT_VALUE_REGNUM' should be the number of that register. - -`STRUCT_VALUE' - If the structure value address is not passed in a register, define - `STRUCT_VALUE' as an expression returning an RTX for the place - where the address is passed. If it returns 0, the address is - passed as an "invisible" first argument. - -`STRUCT_VALUE_INCOMING_REGNUM' - On some architectures the place where the structure value address - is found by the called function is not the same place that the - caller put it. This can be due to register windows, or it could - be because the function prologue moves it to a different place. - - If the incoming location of the structure value address is in a - register, define this macro as the register number. - -`STRUCT_VALUE_INCOMING' - If the incoming location is not a register, define - `STRUCT_VALUE_INCOMING' as an expression for an RTX for where the - called function should find the value. If it should find the - value on the stack, define this to create a `mem' which refers to - the frame pointer. A definition of 0 means that the address is - passed as an "invisible" first argument. - -`PCC_STATIC_STRUCT_RETURN' - Define this macro if the usual system convention on the target - machine for returning structures and unions is for the called - function to return the address of a static variable containing the - value. GNU CC does not normally use this convention, even if it - is the usual one, but does use it if `-fpcc-struct-value' is - specified. + (define_insn "tstsi" + [(set (cc0) + (match_operand:SI 0 "general_operand" "rm"))] + "" + "* + { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) + return \"tstl %0\"; + return \"cmpl #0,%0\"; }") + + This is an instruction that sets the condition codes based on the +value of a general operand. It has no condition, so any insn whose RTL +description has the form shown may be handled according to this +pattern. The name `tstsi' means "test a `SImode' value" and tells the +RTL generation pass that, when it is necessary to test such a value, an +insn to do so can be constructed using this pattern. + + The output control string is a piece of C code which chooses which +output template to return based on the kind of operand and the specific +type of CPU for which code is being generated. - Do not define this if the usual system convention is for the - caller to pass an address to the subroutine. + `"rm"' is an operand constraint. Its meaning is explained below.  -File: gcc.info, Node: Caller Saves, Next: Function Entry, Prev: Aggregate Return, Up: Stack and Calling +File: gcc.info, Node: RTL Template, Next: Output Template, Prev: Example, Up: Machine Desc -Caller-Saves Register Allocation --------------------------------- +RTL Template +============ + + The RTL template is used to define which insns match the particular +pattern and how to find their operands. For named patterns, the RTL +template also says how to construct an insn from specified operands. + + Construction involves substituting specified operands into a copy of +the template. Matching involves determining the values that serve as +the operands in the insn being matched. Both of these activities are +controlled by special expression types that direct matching and +substitution of the operands. + +`(match_operand:M N PREDICATE CONSTRAINT)' + This expression is a placeholder for operand number N of the insn. + When constructing an insn, operand number N will be substituted + at this point. When matching an insn, whatever appears at this + position in the insn will be taken as operand number N; but it + must satisfy PREDICATE or this instruction pattern will not match + at all. + + Operand numbers must be chosen consecutively counting from zero in + each instruction pattern. There may be only one `match_operand' + expression in the pattern for each operand number. Usually + operands are numbered in the order of appearance in `match_operand' + expressions. + + PREDICATE is a string that is the name of a C function that + accepts two arguments, an expression and a machine mode. During + matching, the function will be called with the putative operand as + the expression and M as the mode argument (if M is not specified, + `VOIDmode' will be used, which normally causes PREDICATE to accept + any mode). If it returns zero, this instruction pattern fails to + match. PREDICATE may be an empty string; then it means no test is + to be done on the operand, so anything which occurs in this + position is valid. + + Most of the time, PREDICATE will reject modes other than M--but + not always. For example, the predicate `address_operand' uses M + as the mode of memory ref that the address should be valid for. + Many predicates accept `const_int' nodes even though their mode is + `VOIDmode'. + + CONSTRAINT controls reloading and the choice of the best register + class to use for a value, as explained later (*note + Constraints::.). + + People are often unclear on the difference between the constraint + and the predicate. The predicate helps decide whether a given + insn matches the pattern. The constraint plays no role in this + decision; instead, it controls various decisions in the case of an + insn which does match. + + On CISC machines, the most common PREDICATE is + `"general_operand"'. This function checks that the putative + operand is either a constant, a register or a memory reference, + and that it is valid for mode M. + + For an operand that must be a register, PREDICATE should be + `"register_operand"'. Using `"general_operand"' would be valid, + since the reload pass would copy any non-register operands through + registers, but this would make GNU CC do extra work, it would + prevent invariant operands (such as constant) from being removed + from loops, and it would prevent the register allocator from doing + the best possible job. On RISC machines, it is usually most + efficient to allow PREDICATE to accept only objects that the + constraints allow. + + For an operand that must be a constant, you must be sure to either + use `"immediate_operand"' for PREDICATE, or make the instruction + pattern's extra condition require a constant, or both. You cannot + expect the constraints to do this work! If the constraints allow + only constants, but the predicate allows something else, the + compiler will crash when that case arises. + +`(match_scratch:M N CONSTRAINT)' + This expression is also a placeholder for operand number N and + indicates that operand must be a `scratch' or `reg' expression. + + When matching patterns, this is equivalent to + + (match_operand:M N "scratch_operand" PRED) + + but, when generating RTL, it produces a (`scratch':M) expression. + + If the last few expressions in a `parallel' are `clobber' + expressions whose operands are either a hard register or + `match_scratch', the combiner can add or delete them when + necessary. *Note Side Effects::. + +`(match_dup N)' + This expression is also a placeholder for operand number N. It is + used when the operand needs to appear more than once in the insn. + + In construction, `match_dup' acts just like `match_operand': the + operand is substituted into the insn being constructed. But in + matching, `match_dup' behaves differently. It assumes that operand + number N has already been determined by a `match_operand' + appearing earlier in the recognition template, and it matches only + an identical-looking expression. + +`(match_operator:M N PREDICATE [OPERANDS...])' + This pattern is a kind of placeholder for a variable RTL expression + code. + + When constructing an insn, it stands for an RTL expression whose + expression code is taken from that of operand N, and whose + operands are constructed from the patterns OPERANDS. + + When matching an expression, it matches an expression if the + function PREDICATE returns nonzero on that expression *and* the + patterns OPERANDS match the operands of the expression. + + Suppose that the function `commutative_operator' is defined as + follows, to match any expression whose operator is one of the + commutative arithmetic operators of RTL and whose mode is MODE: + + int + commutative_operator (x, mode) + rtx x; + enum machine_mode mode; + { + enum rtx_code code = GET_CODE (x); + if (GET_MODE (x) != mode) + return 0; + return (GET_RTX_CLASS (code) == 'c' + || code == EQ || code == NE); + } + + Then the following pattern will match any RTL expression consisting + of a commutative operator applied to two general operands: + + (match_operator:SI 3 "commutative_operator" + [(match_operand:SI 1 "general_operand" "g") + (match_operand:SI 2 "general_operand" "g")]) + + Here the vector `[OPERANDS...]' contains two patterns because the + expressions to be matched all contain two operands. + + When this pattern does match, the two operands of the commutative + operator are recorded as operands 1 and 2 of the insn. (This is + done by the two instances of `match_operand'.) Operand 3 of the + insn will be the entire commutative expression: use `GET_CODE + (operands[3])' to see which commutative operator was used. + + The machine mode M of `match_operator' works like that of + `match_operand': it is passed as the second argument to the + predicate function, and that function is solely responsible for + deciding whether the expression to be matched "has" that mode. + + When constructing an insn, argument 3 of the gen-function will + specify the operation (i.e. the expression code) for the + expression to be made. It should be an RTL expression, whose + expression code is copied into a new expression whose operands are + arguments 1 and 2 of the gen-function. The subexpressions of + argument 3 are not used; only its expression code matters. + + When `match_operator' is used in a pattern for matching an insn, + it usually best if the operand number of the `match_operator' is + higher than that of the actual operands of the insn. This improves + register allocation because the register allocator often looks at + operands 1 and 2 of insns to see if it can do register tying. + + There is no way to specify constraints in `match_operator'. The + operand of the insn which corresponds to the `match_operator' + never has any constraints because it is never reloaded as a whole. + However, if parts of its OPERANDS are matched by `match_operand' + patterns, those parts may have constraints of their own. + +`(match_op_dup:M N[OPERANDS...])' + Like `match_dup', except that it applies to operators instead of + operands. When constructing an insn, operand number N will be + substituted at this point. But in matching, `match_op_dup' behaves + differently. It assumes that operand number N has already been + determined by a `match_operator' appearing earlier in the + recognition template, and it matches only an identical-looking + expression. + +`(match_parallel N PREDICATE [SUBPAT...])' + This pattern is a placeholder for an insn that consists of a + `parallel' expression with a variable number of elements. This + expression should only appear at the top level of an insn pattern. + + When constructing an insn, operand number N will be substituted at + this point. When matching an insn, it matches if the body of the + insn is a `parallel' expression with at least as many elements as + the vector of SUBPAT expressions in the `match_parallel', if each + SUBPAT matches the corresponding element of the `parallel', *and* + the function PREDICATE returns nonzero on the `parallel' that is + the body of the insn. It is the responsibility of the predicate + to validate elements of the `parallel' beyond those listed in the + `match_parallel'. + + A typical use of `match_parallel' is to match load and store + multiple expressions, which can contain a variable number of + elements in a `parallel'. For example, + + (define_insn "" + [(match_parallel 0 "load_multiple_operation" + [(set (match_operand:SI 1 "gpc_reg_operand" "=r") + (match_operand:SI 2 "memory_operand" "m")) + (use (reg:SI 179)) + (clobber (reg:SI 179))])] + "" + "loadm 0,0,%1,%2") + + This example comes from `a29k.md'. The function + `load_multiple_operations' is defined in `a29k.c' and checks that + subsequent elements in the `parallel' are the same as the `set' in + the pattern, except that they are referencing subsequent registers + and memory locations. + + An insn that matches this pattern might look like: + + (parallel + [(set (reg:SI 20) (mem:SI (reg:SI 100))) + (use (reg:SI 179)) + (clobber (reg:SI 179)) + (set (reg:SI 21) + (mem:SI (plus:SI (reg:SI 100) + (const_int 4)))) + (set (reg:SI 22) + (mem:SI (plus:SI (reg:SI 100) + (const_int 8))))]) + +`(match_par_dup N [SUBPAT...])' + Like `match_op_dup', but for `match_parallel' instead of + `match_operator'. + +`(address (match_operand:M N "address_operand" ""))' + This complex of expressions is a placeholder for an operand number + N in a "load address" instruction: an operand which specifies a + memory location in the usual way, but for which the actual operand + value used is the address of the location, not the contents of the + location. + + `address' expressions never appear in RTL code, only in machine + descriptions. And they are used only in machine descriptions that + do not use the operand constraint feature. When operand + constraints are in use, the letter `p' in the constraint serves + this purpose. + + M is the machine mode of the *memory location being addressed*, + not the machine mode of the address itself. That mode is always + the same on a given target machine (it is `Pmode', which normally + is `SImode'), so there is no point in mentioning it; thus, no + machine mode is written in the `address' expression. If some day + support is added for machines in which addresses of different + kinds of objects appear differently or are used differently (such + as the PDP-10), different formats would perhaps need different + machine modes and these modes might be written in the `address' + expression. + + +File: gcc.info, Node: Output Template, Next: Output Statement, Prev: RTL Template, Up: Machine Desc - If you enable it, GNU CC can save registers around function calls. -This makes it possible to use call-clobbered registers to hold -variables that must live across calls. - -`DEFAULT_CALLER_SAVES' - Define this macro if function calls on the target machine do not - preserve any registers; in other words, if `CALL_USED_REGISTERS' - has 1 for all registers. This macro enables `-fcaller-saves' by - default. Eventually that option will be enabled by default on all - machines and both the option and this macro will be eliminated. - -`CALLER_SAVE_PROFITABLE (REFS, CALLS)' - A C expression to determine whether it is worthwhile to consider - placing a pseudo-register in a call-clobbered hard register and - saving and restoring it around each function call. The expression - should be 1 when this is worth doing, and 0 otherwise. +Output Templates and Operand Substitution +========================================= - If you don't define this macro, a default is used which is good on - most machines: `4 * CALLS < REFS'. + The "output template" is a string which specifies how to output the +assembler code for an instruction pattern. Most of the template is a +fixed string which is output literally. The character `%' is used to +specify where to substitute an operand; it can also be used to identify +places where different variants of the assembler require different +syntax. + + In the simplest case, a `%' followed by a digit N says to output +operand N at that point in the string. + + `%' followed by a letter and a digit says to output an operand in an +alternate fashion. Four letters have standard, built-in meanings +described below. The machine description macro `PRINT_OPERAND' can +define additional letters with nonstandard meanings. + + `%cDIGIT' can be used to substitute an operand that is a constant +value without the syntax that normally indicates an immediate operand. + + `%nDIGIT' is like `%cDIGIT' except that the value of the constant is +negated before printing. + + `%aDIGIT' can be used to substitute an operand as if it were a +memory reference, with the actual operand treated as the address. This +may be useful when outputting a "load address" instruction, because +often the assembler syntax for such an instruction requires you to +write the operand as if it were a memory reference. + + `%lDIGIT' is used to substitute a `label_ref' into a jump +instruction. + + `%=' outputs a number which is unique to each instruction in the +entire compilation. This is useful for making local labels to be +referred to more than once in a single template that generates multiple +assembler instructions. + + `%' followed by a punctuation character specifies a substitution that +does not use an operand. Only one case is standard: `%%' outputs a `%' +into the assembler code. Other nonstandard cases can be defined in the +`PRINT_OPERAND' macro. You must also define which punctuation +characters are valid with the `PRINT_OPERAND_PUNCT_VALID_P' macro. + + The template may generate multiple assembler instructions. Write +the text for the instructions, with `\;' between them. + + When the RTL contains two operands which are required by constraint +to match each other, the output template must refer only to the +lower-numbered operand. Matching operands are not always identical, +and the rest of the compiler arranges to put the proper RTL expression +for printing into the lower-numbered operand. + + One use of nonstandard letters or punctuation following `%' is to +distinguish between different assembler languages for the same machine; +for example, Motorola syntax versus MIT syntax for the 68000. Motorola +syntax requires periods in most opcode names, while MIT syntax does +not. For example, the opcode `movel' in MIT syntax is `move.l' in +Motorola syntax. The same file of patterns is used for both kinds of +output syntax, but the character sequence `%.' is used in each place +where Motorola syntax wants a period. The `PRINT_OPERAND' macro for +Motorola syntax defines the sequence to output a period; the macro for +MIT syntax defines it to do nothing. + + As a special case, a template consisting of the single character `#' +instructs the compiler to first split the insn, and then output the +resulting instructions separately. This helps eliminate redundancy in +the output templates. If you have a `define_insn' that needs to emit +multiple assembler instructions, and there is an matching `define_split' +already defined, then you can simply use `#' as the output template +instead of writing an output template that emits the multiple assembler +instructions. + + If `ASSEMBLER_DIALECT' is defined, you can use +`{option0|option1|option2}' constructs in the templates. These +describe multiple variants of assembler language syntax. *Note +Instruction Output::. - \ No newline at end of file