--- gcc/gcc.info-15 2018/04/24 17:57:27 1.1.1.3 +++ gcc/gcc.info-15 2018/04/24 18:25:44 1.1.1.8 @@ -1,9 +1,13 @@ -This is Info file gcc.info, produced by Makeinfo-1.47 from the input +This is Info file gcc.info, produced by Makeinfo-1.55 from the input file gcc.texi. This file documents the use and the internals of the GNU compiler. - Copyright (C) 1988, 1989, 1992 Free Software Foundation, Inc. + Published by the Free Software Foundation 59 Temple Place - Suite 330 +Boston, MA 02111-1307 USA + + Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995 Free Software +Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are @@ -11,920 +15,1094 @@ preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also -that the sections entitled "GNU General Public License" and "Boycott" -are included exactly as in the original, and provided that the entire +that the sections entitled "GNU General Public License," "Funding for +Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are +included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public -License" and "Boycott", and this permission notice, may be included in +License," "Funding for Free Software," and "Protect Your Freedom--Fight +`Look And Feel'", and this permission notice, may be included in translations approved by the Free Software Foundation instead of in the original English.  -File: gcc.info, Node: Function Entry, Next: Profiling, Prev: Caller Saves, Up: Stack and Calling +File: gcc.info, Node: Side Effects, Next: Incdec, Prev: RTL Declarations, Up: RTL + +Side Effect Expressions +======================= + + The expression codes described so far represent values, not actions. +But machine instructions never produce values; they are meaningful only +for their side effects on the state of the machine. Special expression +codes are used to represent side effects. + + The body of an instruction is always one of these side effect codes; +the codes described above, which represent values, appear only as the +operands of these. + +`(set LVAL X)' + Represents the action of storing the value of X into the place + represented by LVAL. LVAL must be an expression representing a + place that can be stored in: `reg' (or `subreg' or + `strict_low_part'), `mem', `pc' or `cc0'. + + If LVAL is a `reg', `subreg' or `mem', it has a machine mode; then + X must be valid for that mode. + + If LVAL is a `reg' whose machine mode is less than the full width + of the register, then it means that the part of the register + specified by the machine mode is given the specified value and the + rest of the register receives an undefined value. Likewise, if + LVAL is a `subreg' whose machine mode is narrower than the mode of + the register, the rest of the register can be changed in an + undefined way. + + If LVAL is a `strict_low_part' of a `subreg', then the part of the + register specified by the machine mode of the `subreg' is given + the value X and the rest of the register is not changed. + + If LVAL is `(cc0)', it has no machine mode, and X may be either a + `compare' expression or a value that may have any mode. The + latter case represents a "test" instruction. The expression `(set + (cc0) (reg:M N))' is equivalent to `(set (cc0) (compare (reg:M N) + (const_int 0)))'. Use the former expression to save space during + the compilation. + + If LVAL is `(pc)', we have a jump instruction, and the + possibilities for X are very limited. It may be a `label_ref' + expression (unconditional jump). It may be an `if_then_else' + (conditional jump), in which case either the second or the third + operand must be `(pc)' (for the case which does not jump) and the + other of the two must be a `label_ref' (for the case which does + jump). X may also be a `mem' or `(plus:SI (pc) Y)', where Y may + be a `reg' or a `mem'; these unusual patterns are used to + represent jumps through branch tables. + + If LVAL is neither `(cc0)' nor `(pc)', the mode of LVAL must not + be `VOIDmode' and the mode of X must be valid for the mode of LVAL. + + LVAL is customarily accessed with the `SET_DEST' macro and X with + the `SET_SRC' macro. + +`(return)' + As the sole expression in a pattern, represents a return from the + current function, on machines where this can be done with one + instruction, such as Vaxes. On machines where a multi-instruction + "epilogue" must be executed in order to return from the function, + returning is done by jumping to a label which precedes the + epilogue, and the `return' expression code is never used. + + Inside an `if_then_else' expression, represents the value to be + placed in `pc' to return to the caller. + + Note that an insn pattern of `(return)' is logically equivalent to + `(set (pc) (return))', but the latter form is never used. + +`(call FUNCTION NARGS)' + Represents a function call. FUNCTION is a `mem' expression whose + address is the address of the function to be called. NARGS is an + expression which can be used for two purposes: on some machines it + represents the number of bytes of stack argument; on others, it + represents the number of argument registers. + + Each machine has a standard machine mode which FUNCTION must have. + The machine description defines macro `FUNCTION_MODE' to expand + into the requisite mode name. The purpose of this mode is to + specify what kind of addressing is allowed, on machines where the + allowed kinds of addressing depend on the machine mode being + addressed. + +`(clobber X)' + Represents the storing or possible storing of an unpredictable, + undescribed value into X, which must be a `reg', `scratch' or + `mem' expression. + + One place this is used is in string instructions that store + standard values into particular hard registers. It may not be + worth the trouble to describe the values that are stored, but it + is essential to inform the compiler that the registers will be + altered, lest it attempt to keep data in them across the string + instruction. + + If X is `(mem:BLK (const_int 0))', it means that all memory + locations must be presumed clobbered. + + Note that the machine description classifies certain hard + registers as "call-clobbered". All function call instructions are + assumed by default to clobber these registers, so there is no need + to use `clobber' expressions to indicate this fact. Also, each + function call is assumed to have the potential to alter any memory + location, unless the function is declared `const'. + + If the last group of expressions in a `parallel' are each a + `clobber' expression whose arguments are `reg' or `match_scratch' + (*note RTL Template::.) expressions, the combiner phase can add + the appropriate `clobber' expressions to an insn it has + constructed when doing so will cause a pattern to be matched. + + This feature can be used, for example, on a machine that whose + multiply and add instructions don't use an MQ register but which + has an add-accumulate instruction that does clobber the MQ + register. Similarly, a combined instruction might require a + temporary register while the constituent instructions might not. + + When a `clobber' expression for a register appears inside a + `parallel' with other side effects, the register allocator + guarantees that the register is unoccupied both before and after + that insn. However, the reload phase may allocate a register used + for one of the inputs unless the `&' constraint is specified for + the selected alternative (*note Modifiers::.). You can clobber + either a specific hard register, a pseudo register, or a `scratch' + expression; in the latter two cases, GNU CC will allocate a hard + register that is available there for use as a temporary. + + For instructions that require a temporary register, you should use + `scratch' instead of a pseudo-register because this will allow the + combiner phase to add the `clobber' when required. You do this by + coding (`clobber' (`match_scratch' ...)). If you do clobber a + pseudo register, use one which appears nowhere else--generate a + new one each time. Otherwise, you may confuse CSE. + + There is one other known use for clobbering a pseudo register in a + `parallel': when one of the input operands of the insn is also + clobbered by the insn. In this case, using the same pseudo + register in the clobber and elsewhere in the insn produces the + expected results. + +`(use X)' + Represents the use of the value of X. It indicates that the value + in X at this point in the program is needed, even though it may + not be apparent why this is so. Therefore, the compiler will not + attempt to delete previous instructions whose only effect is to + store a value in X. X must be a `reg' expression. + + During the delayed branch scheduling phase, X may be an insn. + This indicates that X previously was located at this place in the + code and its data dependencies need to be taken into account. + These `use' insns will be deleted before the delayed branch + scheduling phase exits. + +`(parallel [X0 X1 ...])' + Represents several side effects performed in parallel. The square + brackets stand for a vector; the operand of `parallel' is a vector + of expressions. X0, X1 and so on are individual side effect + expressions--expressions of code `set', `call', `return', + `clobber' or `use'. + + "In parallel" means that first all the values used in the + individual side-effects are computed, and second all the actual + side-effects are performed. For example, + + (parallel [(set (reg:SI 1) (mem:SI (reg:SI 1))) + (set (mem:SI (reg:SI 1)) (reg:SI 1))]) + + says unambiguously that the values of hard register 1 and the + memory location addressed by it are interchanged. In both places + where `(reg:SI 1)' appears as a memory address it refers to the + value in register 1 *before* the execution of the insn. + + It follows that it is *incorrect* to use `parallel' and expect the + result of one `set' to be available for the next one. For + example, people sometimes attempt to represent a jump-if-zero + instruction this way: + + (parallel [(set (cc0) (reg:SI 34)) + (set (pc) (if_then_else + (eq (cc0) (const_int 0)) + (label_ref ...) + (pc)))]) + + But this is incorrect, because it says that the jump condition + depends on the condition code value *before* this instruction, not + on the new value that is set by this instruction. + + Peephole optimization, which takes place together with final + assembly code output, can produce insns whose patterns consist of + a `parallel' whose elements are the operands needed to output the + resulting assembler code--often `reg', `mem' or constant + expressions. This would not be well-formed RTL at any other stage + in compilation, but it is ok then because no further optimization + remains to be done. However, the definition of the macro + `NOTICE_UPDATE_CC', if any, must deal with such insns if you + define any peephole optimizations. + +`(sequence [INSNS ...])' + Represents a sequence of insns. Each of the INSNS that appears in + the vector is suitable for appearing in the chain of insns, so it + must be an `insn', `jump_insn', `call_insn', `code_label', + `barrier' or `note'. + + A `sequence' RTX is never placed in an actual insn during RTL + generation. It represents the sequence of insns that result from a + `define_expand' *before* those insns are passed to `emit_insn' to + insert them in the chain of insns. When actually inserted, the + individual sub-insns are separated out and the `sequence' is + forgotten. + + After delay-slot scheduling is completed, an insn and all the + insns that reside in its delay slots are grouped together into a + `sequence'. The insn requiring the delay slot is the first insn + in the vector; subsequent insns are to be placed in the delay slot. + + `INSN_ANNULLED_BRANCH_P' is set on an insn in a delay slot to + indicate that a branch insn should be used that will conditionally + annul the effect of the insns in the delay slots. In such a case, + `INSN_FROM_TARGET_P' indicates that the insn is from the target of + the branch and should be executed only if the branch is taken; + otherwise the insn should be executed only if the branch is not + taken. *Note Delay Slots::. + + These expression codes appear in place of a side effect, as the body +of an insn, though strictly speaking they do not always describe side +effects as such: + +`(asm_input S)' + Represents literal assembler code as described by the string S. + +`(unspec [OPERANDS ...] INDEX)' +`(unspec_volatile [OPERANDS ...] INDEX)' + Represents a machine-specific operation on OPERANDS. INDEX + selects between multiple machine-specific operations. + `unspec_volatile' is used for volatile operations and operations + that may trap; `unspec' is used for other operations. + + These codes may appear inside a `pattern' of an insn, inside a + `parallel', or inside an expression. + +`(addr_vec:M [LR0 LR1 ...])' + Represents a table of jump addresses. The vector elements LR0, + etc., are `label_ref' expressions. The mode M specifies how much + space is given to each address; normally M would be `Pmode'. + +`(addr_diff_vec:M BASE [LR0 LR1 ...])' + Represents a table of jump addresses expressed as offsets from + BASE. The vector elements LR0, etc., are `label_ref' expressions + and so is BASE. The mode M specifies how much space is given to + each address-difference. -Function Entry and Exit ------------------------ + +File: gcc.info, Node: Incdec, Next: Assembler, Prev: Side Effects, Up: RTL - This section describes the macros that output function entry -("prologue") and exit ("epilogue") code. +Embedded Side-Effects on Addresses +================================== -`FUNCTION_PROLOGUE (FILE, SIZE)' - A C compound statement that outputs the assembler code for entry - to a function. The prologue is responsible for setting up the - stack frame, initializing the frame pointer register, saving - registers that must be saved, and allocating SIZE additional bytes - of storage for the local variables. SIZE is an integer. FILE is - a stdio stream to which the assembler code should be output. - - The label for the beginning of the function need not be output by - this macro. That has already been done when the macro is run. - - To determine which registers to save, the macro can refer to the - array `regs_ever_live': element R is nonzero if hard register R is - used anywhere within the function. This implies the function - prologue should save register R, provided it is not one of the - call-used registers. (`FUNCTION_EPILOGUE' must likewise use - `regs_ever_live'.) - - On machines that have "register windows", the function entry code - does not save on the stack the registers that are in the windows, - even if they are supposed to be preserved by function calls; - instead it takes appropriate steps to "push" the register stack, - if any non-call-used registers are used in the function. - - On machines where functions may or may not have frame-pointers, the - function entry code must vary accordingly; it must set up the frame - pointer if one is wanted, and not otherwise. To determine whether - a frame pointer is in wanted, the macro can refer to the variable - `frame_pointer_needed'. The variable's value will be 1 at run - time in a function that needs a frame pointer. *Note - Elimination::. - - The function entry code is responsible for allocating any stack - space required for the function. This stack space consists of the - regions listed below. In most cases, these regions are allocated - in the order listed, with the last listed region closest to the - top of the stack (the lowest address if `STACK_GROWS_DOWNWARD' is - defined, and the highest address if it is not defined). You can - use a different order for a machine if doing so is more convenient - or required for compatibility reasons. Except in cases where - required by standard or by a debugger, there is no reason why the - stack layout used by GCC need agree with that used by other - compilers for a machine. - - * A region of `current_function_pretend_args_size' bytes of - uninitialized space just underneath the first argument - arriving on the stack. (This may not be at the very start of - the allocated stack region if the calling sequence has pushed - anything else since pushing the stack arguments. But - usually, on such machines, nothing else has been pushed yet, - because the function prologue itself does all the pushing.) - This region is used on machines where an argument may be - passed partly in registers and partly in memory, and, in some - cases to support the features in `varargs.h' and `stdargs.h'. - - * An area of memory used to save certain registers used by the - function. The size of this area, which may also include space - for such things as the return address and pointers to - previous stack frames, is machine-specific and usually - depends on which registers have been used in the function. - Machines with register windows often do not require a save - area. - - * A region of at least SIZE bytes, possibly rounded up to an - allocation boundary, to contain the local variables of the - function. On some machines, this region and the save area - may occur in the opposite order, with the save area closer to - the top of the stack. - - * Optionally, in the case that `ACCUMULATE_OUTGOING_ARGS' is - defined, a region of `current_function_outgoing_args_size' - bytes to be used for outgoing argument lists of the function. - *Note Stack Arguments::. - - Normally, it is necessary for `FUNCTION_PROLOGUE' and - `FUNCTION_EPILOGUE' to treat leaf functions specially. The C - variable `leaf_function' is nonzero for such a function. - -`EXIT_IGNORE_STACK' - Define this macro as a C expression that is nonzero if the return - instruction or the function epilogue ignores the value of the stack - pointer; in other words, if it is safe to delete an instruction to - adjust the stack pointer before a return from the function. - - Note that this macro's value is relevant only for functions for - which frame pointers are maintained. It is never safe to delete a - final stack adjustment in a function that has no frame pointer, - and the compiler knows this regardless of `EXIT_IGNORE_STACK'. - -`FUNCTION_EPILOGUE (FILE, SIZE)' - A C compound statement that outputs the assembler code for exit - from a function. The epilogue is responsible for restoring the - saved registers and stack pointer to their values when the - function was called, and returning control to the caller. This - macro takes the same arguments as the macro `FUNCTION_PROLOGUE', - and the registers to restore are determined from `regs_ever_live' - and `CALL_USED_REGISTERS' in the same way. - - On some machines, there is a single instruction that does all the - work of returning from the function. On these machines, give that - instruction the name `return' and do not define the macro - `FUNCTION_EPILOGUE' at all. - - Do not define a pattern named `return' if you want the - `FUNCTION_EPILOGUE' to be used. If you want the target switches - to control whether return instructions or epilogues are used, - define a `return' pattern with a validity condition that tests the - target switches appropriately. If the `return' pattern's validity - condition is false, epilogues will be used. - - On machines where functions may or may not have frame-pointers, the - function exit code must vary accordingly. Sometimes the code for - these two cases is completely different. To determine whether a - frame pointer is in wanted, the macro can refer to the variable - `frame_pointer_needed'. The variable's value will be 1 at run - time in a function that needs a frame pointer. - - Normally, it is necessary for `FUNCTION_PROLOGUE' and - `FUNCTION_EPILOGUE' to treat leaf functions specially. The C - variable `leaf_function' is nonzero for such a function. *Note - Leaf Functions::. - - On some machines, some functions pop their arguments on exit while - others leave that for the caller to do. For example, the 68020 - when given `-mrtd' pops arguments in functions that take a fixed - number of arguments. - - Your definition of the macro `RETURN_POPS_ARGS' decides which - functions pop their own arguments. `FUNCTION_EPILOGUE' needs to - know what was decided. The variable `current_function_pops_args' - is the number of bytes of its arguments that a function should pop. - *Note Scalar Return::. - -`DELAY_SLOTS_FOR_EPILOGUE' - Define this macro if the function epilogue contains delay slots to - which instructions from the rest of the function can be "moved". - The definition should be a C expression whose value is an integer - representing the number of delay slots there. - -`ELIGIBLE_FOR_EPILOGUE_DELAY (INSN, N)' - A C expression that returns 1 if INSN can be placed in delay slot - number N of the epilogue. - - The argument N is an integer which identifies the delay slot now - being considered (since different slots may have different rules of - eligibility). It is never negative and is always less than the - number of epilogue delay slots (what `DELAY_SLOTS_FOR_EPILOGUE' - returns). If you reject a particular insn for a given delay slot, - in principle, it may be reconsidered for a subsequent delay slot. - Also, other insns may (at least in principle) be considered for - the so far unfilled delay slot. - - The insns accepted to fill the epilogue delay slots are put in an - RTL list made with `insn_list' objects, stored in the variable - `current_function_epilogue_delay_list'. The insn for the first - delay slot comes first in the list. Your definition of the macro - `FUNCTION_EPILOGUE' should fill the delay slots by outputting the - insns in this list, usually by calling `final_scan_insn'. + Four special side-effect expression codes appear as memory addresses. - You need not define this macro if you did not define - `DELAY_SLOTS_FOR_EPILOGUE'. +`(pre_dec:M X)' + Represents the side effect of decrementing X by a standard amount + and represents also the value that X has after being decremented. + x must be a `reg' or `mem', but most machines allow only a `reg'. + m must be the machine mode for pointers on the machine in use. + The amount X is decremented by is the length in bytes of the + machine mode of the containing memory reference of which this + expression serves as the address. Here is an example of its use: + + (mem:DF (pre_dec:SI (reg:SI 39))) + + This says to decrement pseudo register 39 by the length of a + `DFmode' value and use the result to address a `DFmode' value. + +`(pre_inc:M X)' + Similar, but specifies incrementing X instead of decrementing it. + +`(post_dec:M X)' + Represents the same side effect as `pre_dec' but a different + value. The value represented here is the value X has before being + decremented. + +`(post_inc:M X)' + Similar, but specifies incrementing X instead of decrementing it. + + These embedded side effect expressions must be used with care. +Instruction patterns may not use them. Until the `flow' pass of the +compiler, they may occur only to represent pushes onto the stack. The +`flow' pass finds cases where registers are incremented or decremented +in one instruction and used as an address shortly before or after; +these cases are then transformed to use pre- or post-increment or +-decrement. + + If a register used as the operand of these expressions is used in +another address in an insn, the original value of the register is used. +Uses of the register outside of an address are not permitted within the +same insn as a use in an embedded side effect expression because such +insns behave differently on different machines and hence must be treated +as ambiguous and disallowed. + + An instruction that can be represented with an embedded side effect +could also be represented using `parallel' containing an additional +`set' to describe how the address register is altered. This is not +done because machines that allow these operations at all typically +allow them wherever a memory address is called for. Describing them as +additional parallel stores would require doubling the number of entries +in the machine description.  -File: gcc.info, Node: Profiling, Prev: Function Entry, Up: Stack and Calling +File: gcc.info, Node: Assembler, Next: Insns, Prev: Incdec, Up: RTL -Generating Code for Profiling ------------------------------ +Assembler Instructions as Expressions +===================================== -`FUNCTION_PROFILER (FILE, LABELNO)' - A C statement or compound statement to output to FILE some - assembler code to call the profiling subroutine `mcount'. Before - calling, the assembler code must load the address of a counter - variable into a register where `mcount' expects to find the - address. The name of this variable is `LP' followed by the number - LABELNO, so you would generate the name using `LP%d' in a - `fprintf'. - - The details of how the address should be passed to `mcount' are - determined by your operating system environment, not by GNU CC. To - figure them out, compile a small program for profiling using the - system's installed C compiler and look at the assembler code that - results. - -`PROFILE_BEFORE_PROLOGUE' - Define this macro if the code for function profiling should come - before the function prologue. Normally, the profiling code comes - after. - -`FUNCTION_BLOCK_PROFILER (FILE, LABELNO)' - A C statement or compound statement to output to FILE some - assembler code to initialize basic-block profiling for the current - object module. This code should call the subroutine - `__bb_init_func' once per object module, passing it as its sole - argument the address of a block allocated in the object module. - - The name of the block is a local symbol made with this statement: - - ASM_GENERATE_INTERNAL_LABEL (BUFFER, "LPBX", 0); - - Of course, since you are writing the definition of - `ASM_GENERATE_INTERNAL_LABEL' as well as that of this macro, you - can take a short cut in the definition of this macro and use the - name that you know will result. - - The first word of this block is a flag which will be nonzero if the - object module has already been initialized. So test this word - first, and do not call `__bb_init_func' if the flag is nonzero. - -`BLOCK_PROFILER (FILE, BLOCKNO)' - A C statement or compound statement to increment the count - associated with the basic block number BLOCKNO. Basic blocks are - numbered separately from zero within each compilation. The count - associated with block number BLOCKNO is at index BLOCKNO in a - vector of words; the name of this array is a local symbol made - with this statement: - - ASM_GENERATE_INTERNAL_LABEL (BUFFER, "LPBX", 2); - - Of course, since you are writing the definition of - `ASM_GENERATE_INTERNAL_LABEL' as well as that of this macro, you - can take a short cut in the definition of this macro and use the - name that you know will result. + The RTX code `asm_operands' represents a value produced by a +user-specified assembler instruction. It is used to represent an `asm' +statement with arguments. An `asm' statement with a single output +operand, like this: + + asm ("foo %1,%2,%0" : "=a" (outputvar) : "g" (x + y), "di" (*z)); + +is represented using a single `asm_operands' RTX which represents the +value that is stored in `outputvar': + + (set RTX-FOR-OUTPUTVAR + (asm_operands "foo %1,%2,%0" "a" 0 + [RTX-FOR-ADDITION-RESULT RTX-FOR-*Z] + [(asm_input:M1 "g") + (asm_input:M2 "di")])) + +Here the operands of the `asm_operands' RTX are the assembler template +string, the output-operand's constraint, the index-number of the output +operand among the output operands specified, a vector of input operand +RTX's, and a vector of input-operand modes and constraints. The mode +M1 is the mode of the sum `x+y'; M2 is that of `*z'. + + When an `asm' statement has multiple output values, its insn has +several such `set' RTX's inside of a `parallel'. Each `set' contains a +`asm_operands'; all of these share the same assembler template and +vectors, but each contains the constraint for the respective output +operand. They are also distinguished by the output-operand index +number, which is 0, 1, ... for successive output operands.  -File: gcc.info, Node: Varargs, Next: Trampolines, Prev: Stack and Calling, Up: Target Macros +File: gcc.info, Node: Insns, Next: Calls, Prev: Assembler, Up: RTL -Implementing the Varargs Macros -=============================== +Insns +===== - GNU CC comes with an implementation of `varargs.h' and `stdarg.h' -that work without change on machines that pass arguments on the stack. -Other machines require their own implementations of varargs, and the -two machine independent header files must have conditionals to include -it. - - ANSI `stdarg.h' differs from traditional `varargs.h' mainly in the -calling convention for `va_start'. The traditional implementation -takes just one argument, which is the variable in which to store the -argument pointer. The ANSI implementation of `va_start' takes an -additional second argument. The user is supposed to write the last -named argument of the function here. - - However, `va_start' should not use this argument. The way to find -the end of the named arguments is with the built-in functions described -below. - -`__builtin_saveregs ()' - Use this built-in function to save the argument registers in - memory so that the varargs mechanism can access them. Both ANSI - and traditional versions of `va_start' must use - `__builtin_saveregs', unless you use `SETUP_INCOMING_VARARGS' (see - below) instead. - - On some machines, `__builtin_saveregs' is open-coded under the - control of the macro `EXPAND_BUILTIN_SAVEREGS'. On other machines, - it calls a routine written in assembler language, found in - `libgcc2.c'. - - Regardless of what code is generated for the call to - `__builtin_saveregs', it appears at the beginning of the function, - not where the call to `__builtin_saveregs' is written. This is - because the registers must be saved before the function starts to - use them for its own purposes. - -`__builtin_args_info (CATEGORY)' - Use this built-in function to find the first anonymous arguments in - registers. - - In general, a machine may have several categories of registers - used for arguments, each for a particular category of data types. - (For example, on some machines, floating-point registers are used - for floating-point arguments while other arguments are passed in - the general registers.) To make non-varargs functions use the - proper calling convention, you have defined the `CUMULATIVE_ARGS' - data type to record how many registers in each category have been - used so far - - `__builtin_args_info' accesses the same data structure of type - `CUMULATIVE_ARGS' after the ordinary argument layout is finished - with it, with CATEGORY specifying which word to access. Thus, the - value indicates the first unused register in a given category. - - Normally, you would use `__builtin_args_info' in the implementation - of `va_start', accessing each category just once and storing the - value in the `va_list' object. This is because `va_list' will - have to update the values, and there is no way to alter the values - accessed by `__builtin_args_info'. - -`__builtin_next_arg ()' - This is the equivalent of `__builtin_args_info', for stack - arguments. It returns the address of the first anonymous stack - argument, as type `void *'. If `ARGS_GROW_DOWNWARD', it returns - the address of the location above the first anonymous stack - argument. Use it in `va_start' to initialize the pointer for - fetching arguments from the stack. - -`__builtin_classify_type (OBJECT)' - Since each machine has its own conventions for which data types are - passed in which kind of register, your implementation of `va_arg' - has to embody these conventions. The easiest way to categorize the - specified data type is to use `__builtin_classify_type' together - with `sizeof' and `__alignof__'. - - `__builtin_classify_type' ignores the value of OBJECT, considering - only its data type. It returns an integer describing what kind of - type that is--integer, floating, pointer, structure, and so on. - - The file `typeclass.h' defines an enumeration that you can use to - interpret the values of `__builtin_classify_type'. - - These machine description macros help implement varargs: - -`EXPAND_BUILTIN_SAVEREGS (ARGS)' - If defined, is a C expression that produces the machine-specific - code for a call to `__builtin_saveregs'. This code will be moved - to the very beginning of the function, before any parameter access - are made. The return value of this function should be an RTX that - contains the value to use as the return of `__builtin_saveregs'. - - The argument ARGS is a `tree_list' containing the arguments that - were passed to `__builtin_saveregs'. - - If this macro is not defined, the compiler will output an ordinary - call to the library function `__builtin_saveregs'. - -`SETUP_INCOMING_VARARGS (ARGS_SO_FAR, MODE, TYPE, PRETEND_ARGS_SIZE, SECOND_TIME)' - This macro offers an alternative to using `__builtin_saveregs' and - defining the macro `EXPAND_BUILTIN_SAVEREGS'. Use it to store the - anonymous register arguments into the stack so that all the - arguments appear to have been passed consecutively on the stack. - Once this is done, you can use the standard implementation of - varargs that works for machines that pass all their arguments on - the stack. - - The argument ARGS_SO_FAR is the `CUMULATIVE_ARGS' data structure, - containing the values that obtain after processing of the named - arguments. The arguments MODE and TYPE describe the last named - argument--its machine mode and its data type as a tree node. - - The macro implementation should do two things: first, push onto the - stack all the argument registers *not* used for the named - arguments, and second, store the size of the data thus pushed into - the `int'-valued variable whose name is supplied as the argument - PRETEND_ARGS_SIZE. The value that you store here will serve as - additional offset for setting up the stack frame. - - Because you must generate code to push the anonymous arguments at - compile time without knowing their data types, - `SETUP_INCOMING_VARARGS' is only useful on machines that have just - a single category of argument register and use it uniformly for - all data types. - - If the argument SECOND_TIME is nonzero, it means that the - arguments of the function are being analyzed for the second time. - This happens for an inline function, which is not actually - compiled until the end of the source file. The macro - `SETUP_INCOMING_VARARGS' should not generate any instructions in - this case. + The RTL representation of the code for a function is a doubly-linked +chain of objects called "insns". Insns are expressions with special +codes that are used for no other purpose. Some insns are actual +instructions; others represent dispatch tables for `switch' statements; +others represent labels to jump to or various sorts of declarative +information. + + In addition to its own specific data, each insn must have a unique +id-number that distinguishes it from all other insns in the current +function (after delayed branch scheduling, copies of an insn with the +same id-number may be present in multiple places in a function, but +these copies will always be identical and will only appear inside a +`sequence'), and chain pointers to the preceding and following insns. +These three fields occupy the same position in every insn, independent +of the expression code of the insn. They could be accessed with `XEXP' +and `XINT', but instead three special macros are always used: + +`INSN_UID (I)' + Accesses the unique id of insn I. + +`PREV_INSN (I)' + Accesses the chain pointer to the insn preceding I. If I is the + first insn, this is a null pointer. + +`NEXT_INSN (I)' + Accesses the chain pointer to the insn following I. If I is the + last insn, this is a null pointer. + + The first insn in the chain is obtained by calling `get_insns'; the +last insn is the result of calling `get_last_insn'. Within the chain +delimited by these insns, the `NEXT_INSN' and `PREV_INSN' pointers must +always correspond: if INSN is not the first insn, + + NEXT_INSN (PREV_INSN (INSN)) == INSN + +is always true and if INSN is not the last insn, + + PREV_INSN (NEXT_INSN (INSN)) == INSN + +is always true. + + After delay slot scheduling, some of the insns in the chain might be +`sequence' expressions, which contain a vector of insns. The value of +`NEXT_INSN' in all but the last of these insns is the next insn in the +vector; the value of `NEXT_INSN' of the last insn in the vector is the +same as the value of `NEXT_INSN' for the `sequence' in which it is +contained. Similar rules apply for `PREV_INSN'. + + This means that the above invariants are not necessarily true for +insns inside `sequence' expressions. Specifically, if INSN is the +first insn in a `sequence', `NEXT_INSN (PREV_INSN (INSN))' is the insn +containing the `sequence' expression, as is the value of `PREV_INSN +(NEXT_INSN (INSN))' is INSN is the last insn in the `sequence' +expression. You can use these expressions to find the containing +`sequence' expression. + + Every insn has one of the following six expression codes: + +`insn' + The expression code `insn' is used for instructions that do not + jump and do not do function calls. `sequence' expressions are + always contained in insns with code `insn' even if one of those + insns should jump or do function calls. + + Insns with code `insn' have four additional fields beyond the three + mandatory ones listed above. These four are described in a table + below. + +`jump_insn' + The expression code `jump_insn' is used for instructions that may + jump (or, more generally, may contain `label_ref' expressions). If + there is an instruction to return from the current function, it is + recorded as a `jump_insn'. + + `jump_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contain a field + `JUMP_LABEL' which is defined once jump optimization has completed. + + For simple conditional and unconditional jumps, this field + contains the `code_label' to which this insn will (possibly + conditionally) branch. In a more complex jump, `JUMP_LABEL' + records one of the labels that the insn refers to; the only way to + find the others is to scan the entire body of the insn. + + Return insns count as jumps, but since they do not refer to any + labels, they have zero in the `JUMP_LABEL' field. + +`call_insn' + The expression code `call_insn' is used for instructions that may + do function calls. It is important to distinguish these + instructions because they imply that certain registers and memory + locations may be altered unpredictably. + + `call_insn' insns have the same extra fields as `insn' insns, + accessed in the same way and in addition contain a field + `CALL_INSN_FUNCTION_USAGE', which contains a list (chain of + `expr_list' expressions) containing `use' and `clobber' + expressions that denote hard registers used or clobbered by the + called function. A register specified in a `clobber' in this list + is modified *after* the execution of the `call_insn', while a + register in a `clobber' in the body of the `call_insn' is + clobbered before the insn completes execution. `clobber' + expressions in this list augment registers specified in + `CALL_USED_REGISTERS' (*note Register Basics::.). + +`code_label' + A `code_label' insn represents a label that a jump insn can jump + to. It contains two special fields of data in addition to the + three standard ones. `CODE_LABEL_NUMBER' is used to hold the + "label number", a number that identifies this label uniquely among + all the labels in the compilation (not just in the current + function). Ultimately, the label is represented in the assembler + output as an assembler label, usually of the form `LN' where N is + the label number. + + When a `code_label' appears in an RTL expression, it normally + appears within a `label_ref' which represents the address of the + label, as a number. + + The field `LABEL_NUSES' is only defined once the jump optimization + phase is completed and contains the number of times this label is + referenced in the current function. + +`barrier' + Barriers are placed in the instruction stream when control cannot + flow past them. They are placed after unconditional jump + instructions to indicate that the jumps are unconditional and + after calls to `volatile' functions, which do not return (e.g., + `exit'). They contain no information beyond the three standard + fields. + +`note' + `note' insns are used to represent additional debugging and + declarative information. They contain two nonstandard fields, an + integer which is accessed with the macro `NOTE_LINE_NUMBER' and a + string accessed with `NOTE_SOURCE_FILE'. + + If `NOTE_LINE_NUMBER' is positive, the note represents the + position of a source line and `NOTE_SOURCE_FILE' is the source + file name that the line came from. These notes control generation + of line number data in the assembler output. + + Otherwise, `NOTE_LINE_NUMBER' is not really a line number but a + code with one of the following values (and `NOTE_SOURCE_FILE' must + contain a null pointer): + + `NOTE_INSN_DELETED' + Such a note is completely ignorable. Some passes of the + compiler delete insns by altering them into notes of this + kind. + + `NOTE_INSN_BLOCK_BEG' + `NOTE_INSN_BLOCK_END' + These types of notes indicate the position of the beginning + and end of a level of scoping of variable names. They + control the output of debugging information. + + `NOTE_INSN_LOOP_BEG' + `NOTE_INSN_LOOP_END' + These types of notes indicate the position of the beginning + and end of a `while' or `for' loop. They enable the loop + optimizer to find loops quickly. + + `NOTE_INSN_LOOP_CONT' + Appears at the place in a loop that `continue' statements + jump to. + + `NOTE_INSN_LOOP_VTOP' + This note indicates the place in a loop where the exit test + begins for those loops in which the exit test has been + duplicated. This position becomes another virtual start of + the loop when considering loop invariants. + + `NOTE_INSN_FUNCTION_END' + Appears near the end of the function body, just before the + label that `return' statements jump to (on machine where a + single instruction does not suffice for returning). This + note may be deleted by jump optimization. + + `NOTE_INSN_SETJMP' + Appears following each call to `setjmp' or a related function. + + These codes are printed symbolically when they appear in debugging + dumps. + + The machine mode of an insn is normally `VOIDmode', but some phases +use the mode for various purposes; for example, the reload pass sets it +to `HImode' if the insn needs reloading but not register elimination +and `QImode' if both are required. The common subexpression +elimination pass sets the mode of an insn to `QImode' when it is the +first insn in a block that has already been processed. + + Here is a table of the extra fields of `insn', `jump_insn' and +`call_insn' insns: + +`PATTERN (I)' + An expression for the side effect performed by this insn. This + must be one of the following codes: `set', `call', `use', + `clobber', `return', `asm_input', `asm_output', `addr_vec', + `addr_diff_vec', `trap_if', `unspec', `unspec_volatile', + `parallel', or `sequence'. If it is a `parallel', each element of + the `parallel' must be one these codes, except that `parallel' + expressions cannot be nested and `addr_vec' and `addr_diff_vec' + are not permitted inside a `parallel' expression. + +`INSN_CODE (I)' + An integer that says which pattern in the machine description + matches this insn, or -1 if the matching has not yet been + attempted. + + Such matching is never attempted and this field remains -1 on an + insn whose pattern consists of a single `use', `clobber', + `asm_input', `addr_vec' or `addr_diff_vec' expression. + + Matching is also never attempted on insns that result from an `asm' + statement. These contain at least one `asm_operands' expression. + The function `asm_noperands' returns a non-negative value for such + insns. + + In the debugging output, this field is printed as a number + followed by a symbolic representation that locates the pattern in + the `md' file as some small positive or negative offset from a + named pattern. + +`LOG_LINKS (I)' + A list (chain of `insn_list' expressions) giving information about + dependencies between instructions within a basic block. Neither a + jump nor a label may come between the related insns. + +`REG_NOTES (I)' + A list (chain of `expr_list' and `insn_list' expressions) giving + miscellaneous information about the insn. It is often information + pertaining to the registers used in this insn. + + The `LOG_LINKS' field of an insn is a chain of `insn_list' +expressions. Each of these has two operands: the first is an insn, and +the second is another `insn_list' expression (the next one in the +chain). The last `insn_list' in the chain has a null pointer as second +operand. The significant thing about the chain is which insns appear +in it (as first operands of `insn_list' expressions). Their order is +not significant. + + This list is originally set up by the flow analysis pass; it is a +null pointer until then. Flow only adds links for those data +dependencies which can be used for instruction combination. For each +insn, the flow analysis pass adds a link to insns which store into +registers values that are used for the first time in this insn. The +instruction scheduling pass adds extra links so that every dependence +will be represented. Links represent data dependencies, +antidependencies and output dependencies; the machine mode of the link +distinguishes these three types: antidependencies have mode +`REG_DEP_ANTI', output dependencies have mode `REG_DEP_OUTPUT', and +data dependencies have mode `VOIDmode'. + + The `REG_NOTES' field of an insn is a chain similar to the +`LOG_LINKS' field but it includes `expr_list' expressions in addition +to `insn_list' expressions. There are several kinds of register notes, +which are distinguished by the machine mode, which in a register note +is really understood as being an `enum reg_note'. The first operand OP +of the note is data whose meaning depends on the kind of note. + + The macro `REG_NOTE_KIND (X)' returns the kind of register note. +Its counterpart, the macro `PUT_REG_NOTE_KIND (X, NEWKIND)' sets the +register note type of X to be NEWKIND. + + Register notes are of three classes: They may say something about an +input to an insn, they may say something about an output of an insn, or +they may create a linkage between two insns. There are also a set of +values that are only used in `LOG_LINKS'. + + These register notes annotate inputs to an insn: + +`REG_DEAD' + The value in OP dies in this insn; that is to say, altering the + value immediately after this insn would not affect the future + behavior of the program. + + This does not necessarily mean that the register OP has no useful + value after this insn since it may also be an output of the insn. + In such a case, however, a `REG_DEAD' note would be redundant and + is usually not present until after the reload pass, but no code + relies on this fact. + +`REG_INC' + The register OP is incremented (or decremented; at this level + there is no distinction) by an embedded side effect inside this + insn. This means it appears in a `post_inc', `pre_inc', + `post_dec' or `pre_dec' expression. + +`REG_NONNEG' + The register OP is known to have a nonnegative value when this + insn is reached. This is used so that decrement and branch until + zero instructions, such as the m68k dbra, can be matched. + + The `REG_NONNEG' note is added to insns only if the machine + description has a `decrement_and_branch_until_zero' pattern. + +`REG_NO_CONFLICT' + This insn does not cause a conflict between OP and the item being + set by this insn even though it might appear that it does. In + other words, if the destination register and OP could otherwise be + assigned the same register, this insn does not prevent that + assignment. + + Insns with this note are usually part of a block that begins with a + `clobber' insn specifying a multi-word pseudo register (which will + be the output of the block), a group of insns that each set one + word of the value and have the `REG_NO_CONFLICT' note attached, + and a final insn that copies the output to itself with an attached + `REG_EQUAL' note giving the expression being computed. This block + is encapsulated with `REG_LIBCALL' and `REG_RETVAL' notes on the + first and last insns, respectively. + +`REG_LABEL' + This insn uses OP, a `code_label', but is not a `jump_insn'. The + presence of this note allows jump optimization to be aware that OP + is, in fact, being used. + + The following notes describe attributes of outputs of an insn: + +`REG_EQUIV' +`REG_EQUAL' + This note is only valid on an insn that sets only one register and + indicates that that register will be equal to OP at run time; the + scope of this equivalence differs between the two types of notes. + The value which the insn explicitly copies into the register may + look different from OP, but they will be equal at run time. If the + output of the single `set' is a `strict_low_part' expression, the + note refers to the register that is contained in `SUBREG_REG' of + the `subreg' expression. + + For `REG_EQUIV', the register is equivalent to OP throughout the + entire function, and could validly be replaced in all its + occurrences by OP. ("Validly" here refers to the data flow of the + program; simple replacement may make some insns invalid.) For + example, when a constant is loaded into a register that is never + assigned any other value, this kind of note is used. + + When a parameter is copied into a pseudo-register at entry to a + function, a note of this kind records that the register is + equivalent to the stack slot where the parameter was passed. + Although in this case the register may be set by other insns, it + is still valid to replace the register by the stack slot + throughout the function. + + In the case of `REG_EQUAL', the register that is set by this insn + will be equal to OP at run time at the end of this insn but not + necessarily elsewhere in the function. In this case, OP is + typically an arithmetic expression. For example, when a sequence + of insns such as a library call is used to perform an arithmetic + operation, this kind of note is attached to the insn that produces + or copies the final value. + + These two notes are used in different ways by the compiler passes. + `REG_EQUAL' is used by passes prior to register allocation (such as + common subexpression elimination and loop optimization) to tell + them how to think of that value. `REG_EQUIV' notes are used by + register allocation to indicate that there is an available + substitute expression (either a constant or a `mem' expression for + the location of a parameter on the stack) that may be used in + place of a register if insufficient registers are available. + + Except for stack homes for parameters, which are indicated by a + `REG_EQUIV' note and are not useful to the early optimization + passes and pseudo registers that are equivalent to a memory + location throughout there entire life, which is not detected until + later in the compilation, all equivalences are initially indicated + by an attached `REG_EQUAL' note. In the early stages of register + allocation, a `REG_EQUAL' note is changed into a `REG_EQUIV' note + if OP is a constant and the insn represents the only set of its + destination register. + + Thus, compiler passes prior to register allocation need only check + for `REG_EQUAL' notes and passes subsequent to register allocation + need only check for `REG_EQUIV' notes. + +`REG_UNUSED' + The register OP being set by this insn will not be used in a + subsequent insn. This differs from a `REG_DEAD' note, which + indicates that the value in an input will not be used subsequently. + These two notes are independent; both may be present for the same + register. + +`REG_WAS_0' + The single output of this insn contained zero before this insn. + OP is the insn that set it to zero. You can rely on this note if + it is present and OP has not been deleted or turned into a `note'; + its absence implies nothing. + + These notes describe linkages between insns. They occur in pairs: +one insn has one of a pair of notes that points to a second insn, which +has the inverse note pointing back to the first insn. + +`REG_RETVAL' + This insn copies the value of a multi-insn sequence (for example, a + library call), and OP is the first insn of the sequence (for a + library call, the first insn that was generated to set up the + arguments for the library call). + + Loop optimization uses this note to treat such a sequence as a + single operation for code motion purposes and flow analysis uses + this note to delete such sequences whose results are dead. + + A `REG_EQUAL' note will also usually be attached to this insn to + provide the expression being computed by the sequence. + +`REG_LIBCALL' + This is the inverse of `REG_RETVAL': it is placed on the first + insn of a multi-insn sequence, and it points to the last one. + +`REG_CC_SETTER' +`REG_CC_USER' + On machines that use `cc0', the insns which set and use `cc0' set + and use `cc0' are adjacent. However, when branch delay slot + filling is done, this may no longer be true. In this case a + `REG_CC_USER' note will be placed on the insn setting `cc0' to + point to the insn using `cc0' and a `REG_CC_SETTER' note will be + placed on the insn using `cc0' to point to the insn setting `cc0'. + + These values are only used in the `LOG_LINKS' field, and indicate +the type of dependency that each link represents. Links which indicate +a data dependence (a read after write dependence) do not use any code, +they simply have mode `VOIDmode', and are printed without any +descriptive text. + +`REG_DEP_ANTI' + This indicates an anti dependence (a write after read dependence). + +`REG_DEP_OUTPUT' + This indicates an output dependence (a write after write + dependence). + + For convenience, the machine mode in an `insn_list' or `expr_list' +is printed using these symbolic codes in debugging dumps. + + The only difference between the expression codes `insn_list' and +`expr_list' is that the first operand of an `insn_list' is assumed to +be an insn and is printed in debugging dumps as the insn's unique id; +the first operand of an `expr_list' is printed in the ordinary way as +an expression.  -File: gcc.info, Node: Trampolines, Next: Library Calls, Prev: Varargs, Up: Target Macros +File: gcc.info, Node: Calls, Next: Sharing, Prev: Insns, Up: RTL -Trampolines for Nested Functions -================================ +RTL Representation of Function-Call Insns +========================================= - A "trampoline" is a small piece of code that is created at run time -when the address of a nested function is taken. It normally resides on -the stack, in the stack frame of the containing function. These macros -tell GNU CC how to generate code to allocate and initialize a -trampoline. - - The instructions in the trampoline must do two things: load a -constant address into the static chain register, and jump to the real -address of the nested function. On CISC machines such as the m68k, -this requires two instructions, a move immediate and a jump. Then the -two addresses exist in the trampoline as word-long immediate operands. -On RISC machines, it is often necessary to load each address into a -register in two parts. Then pieces of each address form separate -immediate operands. - - The code generated to initialize the trampoline must store the -variable parts--the static chain value and the function address--into -the immediate operands of the instructions. On a CISC machine, this is -simply a matter of copying each address to a memory reference at the -proper offset from the start of the trampoline. On a RISC machine, it -may be necessary to take out pieces of the address and store them -separately. - -`TRAMPOLINE_TEMPLATE (FILE)' - A C statement to output, on the stream FILE, assembler code for a - block of data that contains the constant parts of a trampoline. - This code should not include a label--the label is taken care of - automatically. - -`TRAMPOLINE_SIZE' - A C expression for the size in bytes of the trampoline, as an - integer. - -`TRAMPOLINE_ALIGNMENT' - Alignment required for trampolines, in bits. - - If you don't define this macro, the value of `BIGGEST_ALIGNMENT' - is used for aligning trampolines. - -`INITIALIZE_TRAMPOLINE (ADDR, FNADDR, STATIC_CHAIN)' - A C statement to initialize the variable parts of a trampoline. - ADDR is an RTX for the address of the trampoline; FNADDR is an RTX - for the address of the nested function; STATIC_CHAIN is an RTX for - the static chain value that should be passed to the function when - it is called. - -`ALLOCATE_TRAMPOLINE (FP)' - A C expression to allocate run-time space for a trampoline. The - expression value should be an RTX representing a memory reference - to the space for the trampoline. - - If this macro is not defined, by default the trampoline is - allocated as a stack slot. This default is right for most - machines. The exceptions are machines where it is impossible to - execute instructions in the stack area. On such machines, you may - have to implement a separate stack, using this macro in - conjunction with `FUNCTION_PROLOGUE' and `FUNCTION_EPILOGUE'. - - FP points to a data structure, a `struct function', which - describes the compilation status of the immediate containing - function of the function which the trampoline is for. Normally - (when `ALLOCATE_TRAMPOLINE' is not defined), the stack slot for the - trampoline is in the stack frame of this containing function. - Other allocation strategies probably must do something analogous - with this information. - - Implementing trampolines is difficult on many machines because they -have separate instruction and data caches. Writing into a stack -location fails to clear the memory in the instruction cache, so when -the program jumps to that location, it executes the old contents. - - Here are two possible solutions. One is to clear the relevant parts -of the instruction cache whenever a trampoline is set up. The other is -to make all trampolines identical, by having them jump to a standard -subroutine. The former technique makes trampoline execution faster; the -latter makes initialization faster. - - To clear the instruction cache when a trampoline is initialized, -define the following macros which describe the shape of the cache. - -`INSN_CACHE_SIZE' - The total size in bytes of the cache. - -`INSN_CACHE_LINE_WIDTH' - The length in bytes of each cache line. The cache is divided into - cache lines which are disjoint slots, each holding a contiguous - chunk of data fetched from memory. Each time data is brought into - the cache, an entire line is read at once. The data loaded into a - cache line is always aligned on a boundary equal to the line size. - -`INSN_CACHE_DEPTH' - The number of alternative cache lines that can hold any particular - memory location. - - To use a standard subroutine, define the following macro. In -addition, you must make sure that the instructions in a trampoline fill -an entire cache line with identical instructions, or else ensure that -the beginning of the trampoline code is always aligned at the same -point in its cache line. Look in `m68k.h' as a guide. - -`TRANSFER_FROM_TRAMPOLINE' - Define this macro if trampolines need a special subroutine to do - their work. The macro should expand to a series of `asm' - statements which will be compiled with GNU CC. They go in a - library function named `__transfer_from_trampoline'. - - If you need to avoid executing the ordinary prologue code of a - compiled C function when you jump to the subroutine, you can do so - by placing a special label of your own in the assembler code. Use - one `asm' statement to generate an assembler label, and another to - make the label global. Then trampolines can use that label to - jump directly to your special assembler code. + Insns that call subroutines have the RTL expression code `call_insn'. +These insns must satisfy special rules, and their bodies must use a +special RTL expression code, `call'. + + A `call' expression has two operands, as follows: + + (call (mem:FM ADDR) NBYTES) + +Here NBYTES is an operand that represents the number of bytes of +argument data being passed to the subroutine, FM is a machine mode +(which must equal as the definition of the `FUNCTION_MODE' macro in the +machine description) and ADDR represents the address of the subroutine. + + For a subroutine that returns no value, the `call' expression as +shown above is the entire body of the insn, except that the insn might +also contain `use' or `clobber' expressions. + + For a subroutine that returns a value whose mode is not `BLKmode', +the value is returned in a hard register. If this register's number is +R, then the body of the call insn looks like this: + + (set (reg:M R) + (call (mem:FM ADDR) NBYTES)) + +This RTL expression makes it clear (to the optimizer passes) that the +appropriate register receives a useful value in this insn. + + When a subroutine returns a `BLKmode' value, it is handled by +passing to the subroutine the address of a place to store the value. +So the call insn itself does not "return" any value, and it has the +same RTL form as a call that returns nothing. + + On some machines, the call instruction itself clobbers some register, +for example to contain the return address. `call_insn' insns on these +machines should have a body which is a `parallel' that contains both +the `call' expression and `clobber' expressions that indicate which +registers are destroyed. Similarly, if the call instruction requires +some register other than the stack pointer that is not explicitly +mentioned it its RTL, a `use' subexpression should mention that +register. + + Functions that are called are assumed to modify all registers listed +in the configuration macro `CALL_USED_REGISTERS' (*note Register +Basics::.) and, with the exception of `const' functions and library +calls, to modify all of memory. + + Insns containing just `use' expressions directly precede the +`call_insn' insn to indicate which registers contain inputs to the +function. Similarly, if registers other than those in +`CALL_USED_REGISTERS' are clobbered by the called function, insns +containing a single `clobber' follow immediately after the call to +indicate which registers.  -File: gcc.info, Node: Library Calls, Next: Addressing Modes, Prev: Trampolines, Up: Target Macros +File: gcc.info, Node: Sharing, Next: Reading RTL, Prev: Calls, Up: RTL -Implicit Calls to Library Routines -================================== +Structure Sharing Assumptions +============================= + + The compiler assumes that certain kinds of RTL expressions are +unique; there do not exist two distinct objects representing the same +value. In other cases, it makes an opposite assumption: that no RTL +expression object of a certain kind appears in more than one place in +the containing structure. + + These assumptions refer to a single function; except for the RTL +objects that describe global variables and external functions, and a +few standard objects such as small integer constants, no RTL objects +are common to two functions. + + * Each pseudo-register has only a single `reg' object to represent + it, and therefore only a single machine mode. + + * For any symbolic label, there is only one `symbol_ref' object + referring to it. + + * There is only one `const_int' expression with value 0, only one + with value 1, and only one with value -1. Some other integer + values are also stored uniquely. + + * There is only one `pc' expression. + + * There is only one `cc0' expression. + + * There is only one `const_double' expression with value 0 for each + floating point mode. Likewise for values 1 and 2. + + * No `label_ref' or `scratch' appears in more than one place in the + RTL structure; in other words, it is safe to do a tree-walk of all + the insns in the function and assume that each time a `label_ref' + or `scratch' is seen it is distinct from all others that are seen. + + * Only one `mem' object is normally created for each static variable + or stack slot, so these objects are frequently shared in all the + places they appear. However, separate but equal objects for these + variables are occasionally made. + + * When a single `asm' statement has multiple output operands, a + distinct `asm_operands' expression is made for each output operand. + However, these all share the vector which contains the sequence of + input operands. This sharing is used later on to test whether two + `asm_operands' expressions come from the same statement, so all + optimizations must carefully preserve the sharing if they copy the + vector at all. + + * No RTL object appears in more than one place in the RTL structure + except as described above. Many passes of the compiler rely on + this by assuming that they can modify RTL objects in place without + unwanted side-effects on other insns. + + * During initial RTL generation, shared structure is freely + introduced. After all the RTL for a function has been generated, + all shared structure is copied by `unshare_all_rtl' in + `emit-rtl.c', after which the above rules are guaranteed to be + followed. + + * During the combiner pass, shared structure within an insn can exist + temporarily. However, the shared structure is copied before the + combiner is finished with the insn. This is done by calling + `copy_rtx_if_shared', which is a subroutine of `unshare_all_rtl'. + + +File: gcc.info, Node: Reading RTL, Prev: Sharing, Up: RTL + +Reading RTL +=========== + + To read an RTL object from a file, call `read_rtx'. It takes one +argument, a stdio stream, and returns a single RTL object. -`MULSI3_LIBCALL' - A C string constant giving the name of the function to call for - multiplication of one signed full-word by another. If you do not - define this macro, the default name is used, which is `__mulsi3', - a function defined in `libgcc.a'. - -`DIVSI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one signed full-word by another. If you do not define - this macro, the default name is used, which is `__divsi3', a - function defined in `libgcc.a'. - -`UDIVSI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one unsigned full-word by another. If you do not - define this macro, the default name is used, which is `__udivsi3', - a function defined in `libgcc.a'. - -`MODSI3_LIBCALL' - A C string constant giving the name of the function to call for the - remainder in division of one signed full-word by another. If you - do not define this macro, the default name is used, which is - `__modsi3', a function defined in `libgcc.a'. - -`UMODSI3_LIBCALL' - A C string constant giving the name of the function to call for the - remainder in division of one unsigned full-word by another. If - you do not define this macro, the default name is used, which is - `__umodsi3', a function defined in `libgcc.a'. - -`MULDI3_LIBCALL' - A C string constant giving the name of the function to call for - multiplication of one signed double-word by another. If you do not - define this macro, the default name is used, which is `__muldi3', - a function defined in `libgcc.a'. - -`DIVDI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one signed double-word by another. If you do not - define this macro, the default name is used, which is `__divdi3', a - function defined in `libgcc.a'. - -`UDIVDI3_LIBCALL' - A C string constant giving the name of the function to call for - division of one unsigned full-word by another. If you do not - define this macro, the default name is used, which is `__udivdi3', - a function defined in `libgcc.a'. - -`MODDI3_LIBCALL' - A C string constant giving the name of the function to call for the - remainder in division of one signed double-word by another. If - you do not define this macro, the default name is used, which is - `__moddi3', a function defined in `libgcc.a'. - -`UMODDI3_LIBCALL' - A C string constant giving the name of the function to call for the - remainder in division of one unsigned full-word by another. If - you do not define this macro, the default name is used, which is - `__umoddi3', a function defined in `libgcc.a'. - -`TARGET_MEM_FUNCTIONS' - Define this macro if GNU CC should generate calls to the System V - (and ANSI C) library functions `memcpy' and `memset' rather than - the BSD functions `bcopy' and `bzero'. - -`LIBGCC_NEEDS_DOUBLE' - Define this macro if only `float' arguments cannot be passed to - library routines (so they must be converted to `double'). This - macro affects both how library calls are generated and how the - library routines in `libgcc1.c' accept their arguments. It is - useful on machines where floating and fixed point arguments are - passed differently, such as the i860. - -`FLOAT_ARG_TYPE' - Define this macro to override the type used by the library - routines to pick up arguments of type `float'. (By default, they - use a union of `float' and `int'.) - - The obvious choice would be `float'--but that won't work with - traditional C compilers that expect all arguments declared as - `float' to arrive as `double'. To avoid this conversion, the - library routines ask for the value as some other type and then - treat it as a `float'. - - On some systems, no other type will work for this. For these - systems, you must use `LIBGCC_NEEDS_DOUBLE' instead, to force - conversion of the values `double' before they are passed. - -`FLOATIFY (PASSED-VALUE)' - Define this macro to override the way library routines redesignate - a `float' argument as a `float' instead of the type it was passed - as. The default is an expression which takes the `float' field of - the union. - -`FLOAT_VALUE_TYPE' - Define this macro to override the type used by the library - routines to return values that ought to have type `float'. (By - default, they use `int'.) - - The obvious choice would be `float'--but that won't work with - traditional C compilers gratuitously convert values declared as - `float' into `double'. - -`INTIFY (FLOAT-VALUE)' - Define this macro to override the way the value of a - `float'-returning library routine should be packaged in order to - return it. These functions are actually declared to return type - `FLOAT_VALUE_TYPE' (normally `int'). - - These values can't be returned as type `float' because traditional - C compilers would gratuitously convert the value to a `double'. - - A local variable named `intify' is always available when the macro - `INTIFY' is used. It is a union of a `float' field named `f' and - a field named `i' whose type is `FLOAT_VALUE_TYPE' or `int'. - - If you don't define this macro, the default definition works by - copying the value through that union. - -`nongcc_SI_type' - Define this macro as the name of the data type corresponding to - `SImode' in the system's own C compiler. - - You need not define this macro if that type is `int', as it usually - is. - -`perform_...' - Define these macros to supply explicit C statements to carry out - various arithmetic operations on types `float' and `double' in the - library routines in `libgcc1.c'. See that file for a full list of - these macros and their arguments. - - On most machines, you don't need to define any of these macros, - because the C compiler that comes with the system takes care of - doing them. - -`NEXT_OBJC_RUNTIME' - Define this macro to generate code for Objective C message sending - using the calling convention of the NeXT system. This calling - convention involves passing the object, the selector and the - method arguments all at once to the method-lookup library function. - - The default calling convention passes just the object and the - selector to the lookup function, which returns a pointer to the - method. + Reading RTL from a file is very slow. This is not currently a +problem since reading RTL occurs only as part of building the compiler. + + People frequently have the idea of using RTL stored as text in a +file as an interface between a language front end and the bulk of GNU +CC. This idea is not feasible. + + GNU CC was designed to use RTL internally only. Correct RTL for a +given program is very dependent on the particular target machine. And +the RTL does not contain all the information about the program. + + The proper way to interface GNU CC to a new language front end is +with the "tree" data structure. There is no manual for this data +structure, but it is described in the files `tree.h' and `tree.def'.  -File: gcc.info, Node: Addressing Modes, Next: Condition Code, Prev: Library Calls, Up: Target Macros +File: gcc.info, Node: Machine Desc, Next: Target Macros, Prev: RTL, Up: Top -Addressing Modes -================ +Machine Descriptions +******************** -`HAVE_POST_INCREMENT' - Define this macro if the machine supports post-increment - addressing. - -`HAVE_PRE_INCREMENT' -`HAVE_POST_DECREMENT' -`HAVE_PRE_DECREMENT' - Similar for other kinds of addressing. - -`CONSTANT_ADDRESS_P (X)' - A C expression that is 1 if the RTX X is a constant which is a - valid address. On most machines, this can be defined as - `CONSTANT_P (X)', but a few machines are more restrictive in which - constant addresses are supported. - - `CONSTANT_P' accepts integer-values expressions whose values are - not explicitly known, such as `symbol_ref', `label_ref', and - `high' expressions and `const' arithmetic expressions, in addition - to `const_int' and `const_double' expressions. - -`MAX_REGS_PER_ADDRESS' - A number, the maximum number of registers that can appear in a - valid memory address. Note that it is up to you to specify a - value equal to the maximum number that `GO_IF_LEGITIMATE_ADDRESS' - would ever accept. - -`GO_IF_LEGITIMATE_ADDRESS (MODE, X, LABEL)' - A C compound statement with a conditional `goto LABEL;' executed - if X (an RTX) is a legitimate memory address on the target machine - for a memory operand of mode MODE. - - It usually pays to define several simpler macros to serve as - subroutines for this one. Otherwise it may be too complicated to - understand. - - This macro must exist in two variants: a strict variant and a - non-strict one. The strict variant is used in the reload pass. It - must be defined so that any pseudo-register that has not been - allocated a hard register is considered a memory reference. In - contexts where some kind of register is required, a pseudo-register - with no hard register must be rejected. - - The non-strict variant is used in other passes. It must be - defined to accept all pseudo-registers in every context where some - kind of register is required. - - Compiler source files that want to use the strict variant of this - macro define the macro `REG_OK_STRICT'. You should use an `#ifdef - REG_OK_STRICT' conditional to define the strict variant in that - case and the non-strict variant otherwise. - - Typically among the subroutines used to define - `GO_IF_LEGITIMATE_ADDRESS' are subroutines to check for acceptable - registers for various purposes (one for base registers, one for - index registers, and so on). Then only these subroutine macros - need have two variants; the higher levels of macros may be the same - whether strict or not. - - Normally, constant addresses which are the sum of a `symbol_ref' - and an integer are stored inside a `const' RTX to mark them as - constant. Therefore, there is no need to recognize such sums - specifically as legitimate addresses. Normally you would simply - recognize any `const' as legitimate. - - Usually `PRINT_OPERAND_ADDRESS' is not prepared to handle constant - sums that are not marked with `const'. It assumes that a naked - `plus' indicates indexing. If so, then you *must* reject such - naked constant sums as illegitimate addresses, so that none of - them will be given to `PRINT_OPERAND_ADDRESS'. - - On some machines, whether a symbolic address is legitimate depends - on the section that the address refers to. On these machines, - define the macro `ENCODE_SECTION_INFO' to store the information - into the `symbol_ref', and then check for it here. When you see a - `const', you will have to look inside it to find the `symbol_ref' - in order to determine the section. *Note Assembler Format::. - - The best way to modify the name string is by adding text to the - beginning, with suitable punctuation to prevent any ambiguity. - Allocate the new name in `saveable_obstack'. You will have to - modify `ASM_OUTPUT_LABELREF' to remove and decode the added text - and output the name accordingly. - - You can check the information stored here into the `symbol_ref' in - the definitions of `GO_IF_LEGITIMATE_ADDRESS' and - `PRINT_OPERAND_ADDRESS'. - -`REG_OK_FOR_BASE_P (X)' - A C expression that is nonzero if X (assumed to be a `reg' RTX) is - valid for use as a base register. For hard registers, it should - always accept those which the hardware permits and reject the - others. Whether the macro accepts or rejects pseudo registers - must be controlled by `REG_OK_STRICT' as described above. This - usually requires two variant definitions, of which `REG_OK_STRICT' - controls the one actually used. - -`REG_OK_FOR_INDEX_P (X)' - A C expression that is nonzero if X (assumed to be a `reg' RTX) is - valid for use as an index register. - - The difference between an index register and a base register is - that the index register may be scaled. If an address involves the - sum of two registers, neither one of them scaled, then either one - may be labeled the "base" and the other the "index"; but whichever - labeling is used must fit the machine's constraints of which - registers may serve in each capacity. The compiler will try both - labelings, looking for one that is valid, and will reload one or - both registers only if neither labeling works. - -`LEGITIMIZE_ADDRESS (X, OLDX, MODE, WIN)' - A C compound statement that attempts to replace X with a valid - memory address for an operand of mode MODE. WIN will be a C - statement label elsewhere in the code; the macro definition may use - - GO_IF_LEGITIMATE_ADDRESS (MODE, X, WIN); - - to avoid further processing if the address has become legitimate. - - X will always be the result of a call to `break_out_memory_refs', - and OLDX will be the operand that was given to that function to - produce X. - - The code generated by this macro should not alter the substructure - of X. If it transforms X into a more legitimate form, it should - assign X (which will always be a C variable) a new value. - - It is not necessary for this macro to come up with a legitimate - address. The compiler has standard ways of doing so in all cases. - In fact, it is safe for this macro to do nothing. But often a - machine-dependent strategy can generate better code. - -`GO_IF_MODE_DEPENDENT_ADDRESS (ADDR, LABEL)' - A C statement or compound statement with a conditional `goto - LABEL;' executed if memory address X (an RTX) can have different - meanings depending on the machine mode of the memory reference it - is used for. - - Autoincrement and autodecrement addresses typically have - mode-dependent effects because the amount of the increment or - decrement is the size of the operand being addressed. Some - machines have other mode-dependent addresses. Many RISC machines - have no mode-dependent addresses. - - You may assume that ADDR is a valid address for the machine. - -`LEGITIMATE_CONSTANT_P (X)' - A C expression that is nonzero if X is a legitimate constant for - an immediate operand on the target machine. You can assume that X - satisfies `CONSTANT_P', so you need not check this. In fact, `1' - is a suitable definition for this macro on machines where anything - `CONSTANT_P' is valid. - -`LEGITIMATE_PIC_OPERAND_P (X)' - A C expression that is nonzero if X is a legitimate immediate - operand on the target machine when generating position independent - code. You can assume that X satisfies `CONSTANT_P', so you need not - check this. You can also assume FLAG_PIC is true, so you need not - check it either. You need not define this macro if all constants - (including `SYMBOL_REF') can be immediate operands when generating - position independent code. + A machine description has two parts: a file of instruction patterns +(`.md' file) and a C header file of macro definitions. + + The `.md' file for a target machine contains a pattern for each +instruction that the target machine supports (or at least each +instruction that is worth telling the compiler about). It may also +contain comments. A semicolon causes the rest of the line to be a +comment, unless the semicolon is inside a quoted string. + + See the next chapter for information on the C header file. + +* Menu: + +* Patterns:: How to write instruction patterns. +* Example:: An explained example of a `define_insn' pattern. +* RTL Template:: The RTL template defines what insns match a pattern. +* Output Template:: The output template says how to make assembler code + from such an insn. +* Output Statement:: For more generality, write C code to output + the assembler code. +* Constraints:: When not all operands are general operands. +* Standard Names:: Names mark patterns to use for code generation. +* Pattern Ordering:: When the order of patterns makes a difference. +* Dependent Patterns:: Having one pattern may make you need another. +* Jump Patterns:: Special considerations for patterns for jump insns. +* Insn Canonicalizations::Canonicalization of Instructions +* Peephole Definitions::Defining machine-specific peephole optimizations. +* Expander Definitions::Generating a sequence of several RTL insns + for a standard operation. +* Insn Splitting:: Splitting Instructions into Multiple Instructions +* Insn Attributes:: Specifying the value of attributes for generated insns.  -File: gcc.info, Node: Condition Code, Next: Costs, Prev: Addressing Modes, Up: Target Macros +File: gcc.info, Node: Patterns, Next: Example, Up: Machine Desc + +Everything about Instruction Patterns +===================================== + + Each instruction pattern contains an incomplete RTL expression, with +pieces to be filled in later, operand constraints that restrict how the +pieces can be filled in, and an output pattern or C code to generate +the assembler output, all wrapped up in a `define_insn' expression. + + A `define_insn' is an RTL expression containing four or five +operands: + + 1. An optional name. The presence of a name indicate that this + instruction pattern can perform a certain standard job for the + RTL-generation pass of the compiler. This pass knows certain + names and will use the instruction patterns with those names, if + the names are defined in the machine description. + + The absence of a name is indicated by writing an empty string + where the name should go. Nameless instruction patterns are never + used for generating RTL code, but they may permit several simpler + insns to be combined later on. + + Names that are not thus known and used in RTL-generation have no + effect; they are equivalent to no name at all. + + 2. The "RTL template" (*note RTL Template::.) is a vector of + incomplete RTL expressions which show what the instruction should + look like. It is incomplete because it may contain + `match_operand', `match_operator', and `match_dup' expressions + that stand for operands of the instruction. + + If the vector has only one element, that element is the template + for the instruction pattern. If the vector has multiple elements, + then the instruction pattern is a `parallel' expression containing + the elements described. + + 3. A condition. This is a string which contains a C expression that + is the final test to decide whether an insn body matches this + pattern. + + For a named pattern, the condition (if present) may not depend on + the data in the insn being matched, but only the + target-machine-type flags. The compiler needs to test these + conditions during initialization in order to learn exactly which + named instructions are available in a particular run. + + For nameless patterns, the condition is applied only when matching + an individual insn, and only after the insn has matched the + pattern's recognition template. The insn's operands may be found + in the vector `operands'. + + 4. The "output template": a string that says how to output matching + insns as assembler code. `%' in this string specifies where to + substitute the value of an operand. *Note Output Template::. + + When simple substitution isn't general enough, you can specify a + piece of C code to compute the output. *Note Output Statement::. + + 5. Optionally, a vector containing the values of attributes for insns + matching this pattern. *Note Insn Attributes::. + + +File: gcc.info, Node: Example, Next: RTL Template, Prev: Patterns, Up: Machine Desc + +Example of `define_insn' +======================== -Condition Code Status -===================== + Here is an actual example of an instruction pattern, for the +68000/68020. - The file `conditions.h' defines a variable `cc_status' to describe -how the condition code was computed (in case the interpretation of the -condition code depends on the instruction that it was set by). This -variable contains the RTL expressions on which the condition code is -currently based, and several standard flags. - - Sometimes additional machine-specific flags must be defined in the -machine description header file. It can also add additional -machine-specific information by defining `CC_STATUS_MDEP'. - -`CC_STATUS_MDEP' - C code for a data type which is used for declaring the `mdep' - component of `cc_status'. It defaults to `int'. - - This macro is not used on machines that do not use `cc0'. - -`CC_STATUS_MDEP_INIT' - A C expression to initialize the `mdep' field to "empty". The - default definition does nothing, since most machines don't use the - field anyway. If you want to use the field, you should probably - define this macro to initialize it. - - This macro is not used on machines that do not use `cc0'. - -`NOTICE_UPDATE_CC (EXP, INSN)' - A C compound statement to set the components of `cc_status' - appropriately for an insn INSN whose body is EXP. It is this - macro's responsibility to recognize insns that set the condition - code as a byproduct of other activity as well as those that - explicitly set `(cc0)'. - - This macro is not used on machines that do not use `cc0'. - - If there are insns that do not set the condition code but do alter - other machine registers, this macro must check to see whether they - invalidate the expressions that the condition code is recorded as - reflecting. For example, on the 68000, insns that store in address - registers do not set the condition code, which means that usually - `NOTICE_UPDATE_CC' can leave `cc_status' unaltered for such insns. - But suppose that the previous insn set the condition code based - on location `a4@(102)' and the current insn stores a new value in - `a4'. Although the condition code is not changed by this, it will - no longer be true that it reflects the contents of `a4@(102)'. - Therefore, `NOTICE_UPDATE_CC' must alter `cc_status' in this case - to say that nothing is known about the condition code value. - - The definition of `NOTICE_UPDATE_CC' must be prepared to deal with - the results of peephole optimization: insns whose patterns are - `parallel' RTXs containing various `reg', `mem' or constants which - are just the operands. The RTL structure of these insns is not - sufficient to indicate what the insns actually do. What - `NOTICE_UPDATE_CC' should do when it sees one is just to run - `CC_STATUS_INIT'. - - A possible definition of `NOTICE_UPDATE_CC' is to call a function - that looks at an attribute (*note Insn Attributes::.) named, for - example, `cc'. This avoids having detailed information about - patterns in two places, the `md' file and in `NOTICE_UPDATE_CC'. - -`EXTRA_CC_MODES' - A list of names to be used for additional modes for condition code - values in registers (*note Jump Patterns::.). These names are - added to `enum machine_mode' and all have class `MODE_CC'. By - convention, they should start with `CC' and end with `mode'. - - You should only define this macro if your machine does not use - `cc0' and only if additional modes are required. - -`EXTRA_CC_NAMES' - A list of C strings giving the names for the modes listed in - `EXTRA_CC_MODES'. For example, the Sparc defines this macro and - `EXTRA_CC_MODES' as - - #define EXTRA_CC_MODES CC_NOOVmode, CCFPmode - #define EXTRA_CC_NAMES "CC_NOOV", "CCFP" - - This macro is not required if `EXTRA_CC_MODES' is not defined. - -`SELECT_CC_MODE (OP, X)' - Returns a mode from class `MODE_CC' to be used when comparison - operation code OP is applied to rtx X. For example, on the Sparc, - `SELECT_CC_MODE' is defined as (see *note Jump Patterns::. for a - description of the reason for this definition) - - #define SELECT_CC_MODE(OP,X) \ - (GET_MODE_CLASS (GET_MODE (X)) == MODE_FLOAT ? CCFPmode \ - : (GET_CODE (X) == PLUS || GET_CODE (X) == MINUS \ - || GET_CODE (X) == NEG) \ - ? CC_NOOVmode : CCmode) + (define_insn "tstsi" + [(set (cc0) + (match_operand:SI 0 "general_operand" "rm"))] + "" + "* + { if (TARGET_68020 || ! ADDRESS_REG_P (operands[0])) + return \"tstl %0\"; + return \"cmpl #0,%0\"; }") + + This is an instruction that sets the condition codes based on the +value of a general operand. It has no condition, so any insn whose RTL +description has the form shown may be handled according to this +pattern. The name `tstsi' means "test a `SImode' value" and tells the +RTL generation pass that, when it is necessary to test such a value, an +insn to do so can be constructed using this pattern. + + The output control string is a piece of C code which chooses which +output template to return based on the kind of operand and the specific +type of CPU for which code is being generated. - This macro is not required if `EXTRA_CC_MODES' is not defined. + `"rm"' is an operand constraint. Its meaning is explained below. - \ No newline at end of file