--- hatari/src/includes/hdc.h	2019/04/01 07:10:20	1.1.1.2
+++ hatari/src/includes/hdc.h	2019/04/09 08:59:28	1.1.1.13
@@ -1,23 +1,15 @@
 /*
-  Hatari
-  
-  This file contains definitios used for hardware-level
-  harddrive emulation
-
-*/
+  Hatari - hdc.h
 
+  This file is distributed under the GNU General Public License, version 2
+  or at your option any later version. Read the file gpl.txt for details.
 
-/* HD Command packet macros */
-#define HD_OPCODE(a) (a.command[0] & 0x1F)             /* get opcode (bit 0-4) */
-#define HD_CONTROLLER(a) ((a.command[0] & 0xE0)>>5)    /* get HD controller # (5-7) */
-#define HD_DRIVENUM(a) ((a.command[1] & 0xE0) >>5)     /* get drive # (5-7) */
-
-#define HD_LBA_MSB(a) ((unsigned) a.command[1] & 0x1F) /* Logical Block adress, MSB */
-#define HD_LBA_MID(a) ((unsigned) a.command[2])        /* Logical Block adress */
-#define HD_LBA_LSB(a) ((unsigned) a.command[3])        /* Logical Block adress, LSB */
+  This file contains definitions which are used for hardware-level
+  harddrive emulation.
+*/
 
-#define HD_SECTORCOUNT(a) (a.command[4] & 0xFF)        /* get sector count */
-#define HD_CONTROL(a) (a.command[5] & 0xFF)            /* get control byte */
+#ifndef HATARI_HDC_H
+#define HATARI_HDC_H
 
 
 /* Opcodes */
@@ -25,38 +17,90 @@
 #define HD_VERIFY_TRACK    0x05               /* Verify track */
 #define HD_FORMAT_TRACK    0x06               /* Format track */
 #define HD_READ_SECTOR     0x08               /* Read sector */
+#define HD_READ_SECTOR1    0x28               /* Read sector (class 1) */
 #define HD_WRITE_SECTOR    0x0A               /* Write sector */
+#define HD_WRITE_SECTOR1   0x2A               /* Write sector (class 1) */
 
 /* other codes */
+#define HD_TEST_UNIT_RDY   0x00               /* Test unit ready */
+#define HD_FORMAT_DRIVE    0x04               /* Format the whole drive */
 #define HD_SEEK            0x0B               /* Seek */
 #define HD_CORRECTION      0x0D               /* Correction */
 #define HD_INQUIRY         0x12               /* Inquiry */
+#define HD_MODESELECT      0x15               /* Mode select */
 #define HD_MODESENSE       0x1A               /* Mode sense */
 #define HD_REQ_SENSE       0x03               /* Request sense */
 #define HD_SHIP            0x1B               /* Ship drive */
+#define HD_READ_CAPACITY1  0x25               /* Read capacity (class 1) */
 
-#define HD_STATUS_OK          0               /* OK return status */
-#define HD_STATUS_NODRIVE  0x25               /* Invalid drive */
-#define HD_STATUS_OPCODE   0x20               /* Opcode not supported */
-
-#define ACSI_EMU_ON         (nPartitions != 0) 
-/* do we have hdc emulation */
-/* 
-   Structure representing an ACSI command block.
-*/
+/* Status codes */
+#define HD_STATUS_OK       0x00
+#define HD_STATUS_ERROR    0x02
+#define HD_STATUS_BUSY     0x08
+
+/* Error codes for REQUEST SENSE: */
+#define HD_REQSENS_OK       0x00              /* OK return status */
+#define HD_REQSENS_NOSECTOR 0x01              /* No index or sector */
+#define HD_REQSENS_WRITEERR 0x03              /* Write fault */
+#define HD_REQSENS_OPCODE   0x20              /* Opcode not supported */
+#define HD_REQSENS_INVADDR  0x21              /* Invalid block address */
+#define HD_REQSENS_INVARG   0x24              /* Invalid argument */
+#define HD_REQSENS_INVLUN   0x25              /* Invalid LUN */
+
+/**
+ * Information about a ACSI/SCSI drive
+ */
+typedef struct scsi_data {
+	bool enabled;
+	FILE *image_file;
+	Uint32 nLastBlockAddr;      /* The specified sector number */
+	bool bSetLastBlockAddr;
+	Uint8 nLastError;
+	unsigned long hdSize;       /* Size of the hard disk in sectors */
+	unsigned long blockSize;    /* Size of a sector in bytes */
+	/* For NCR5380 emulation: */
+	int direction;
+	Uint8 msgout[4];
+	Uint8 cmd[16];
+	int cmd_len;
+} SCSI_DEV;
+
+/**
+ * Status of the ACSI/SCSI bus/controller including the current command block.
+ */
 typedef struct {
-  int byteCount;         /* count of number of command bytes written */
-  unsigned char command[6]; 
-  short int returnCode;  /* return code from the HDC operation */
-} HDCOMMAND;
-
-extern FILE *hd_image_file;
-extern HDCOMMAND HDCCommand;
-extern short int HDCSectorCount;
-extern int nPartitions;
-
-extern BOOL HDC_Init(char *filename);
-extern void HDC_UnInit();
-extern void HDC_WriteCommandPacket();
-extern void HDC_DebugCommandPacket();
-extern void HDC_EmulateCommandPacket();
+	const char *typestr;        /* "ACSI" or "SCSI" */
+	int target;
+	int byteCount;              /* number of command bytes received */
+	Uint8 command[16];
+	Uint8 opcode;
+	bool bDmaError;
+	short int status;           /* return code from the HDC operation */
+	Uint8 *buffer;              /* Response buffer */
+	int buffer_size;
+	int data_len;
+	int offset;                 /* Current offset into data buffer */
+	FILE *dmawrite_to_fh;
+	SCSI_DEV devs[8];
+} SCSI_CTRLR;
+
+#define ACSI_EMU_ON        bAcsiEmuOn         /* Do we have HDC emulation? */
+
+extern int nAcsiPartitions;
+extern bool bAcsiEmuOn;
+
+/**
+ * API.
+ */
+extern bool HDC_Init(void);
+extern void HDC_UnInit(void);
+extern int HDC_InitDevice(SCSI_DEV *dev, char *filename, unsigned long blockSize);
+extern void HDC_ResetCommandStatus(void);
+extern short int HDC_ReadCommandByte(int addr);
+extern void HDC_WriteCommandByte(int addr, Uint8 byte);
+extern int HDC_PartitionCount(FILE *fp, const Uint64 tracelevel, int *pIsByteSwapped);
+extern off_t HDC_CheckAndGetSize(const char *filename, unsigned long blockSize);
+extern bool HDC_WriteCommandPacket(SCSI_CTRLR *ctr, Uint8 b);
+extern void HDC_DmaTransfer(void);
+
+#endif /* HATARI_HDC_H */