![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to pmumisc.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Apple Darwin 0.x] / kernel / bsd / dev / ppc / drvPMU|
Return to pmumisc.h CVS log | Up to [Apple Darwin 0.x] / kernel / bsd / dev / ppc / drvPMU |
1.1 ! root 1: /* ! 2: * Copyright (c) 1999 Apple Computer, Inc. All rights reserved. ! 3: * ! 4: * @APPLE_LICENSE_HEADER_START@ ! 5: * ! 6: * Portions Copyright (c) 1999 Apple Computer, Inc. All Rights ! 7: * Reserved. This file contains Original Code and/or Modifications of ! 8: * Original Code as defined in and that are subject to the Apple Public ! 9: * Source License Version 1.1 (the "License"). You may not use this file ! 10: * except in compliance with the License. Please obtain a copy of the ! 11: * License at http://www.apple.com/publicsource and read it before using ! 12: * this file. ! 13: * ! 14: * The Original Code and all software distributed under the License are ! 15: * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER ! 16: * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, ! 17: * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, ! 18: * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the ! 19: * License for the specific language governing rights and limitations ! 20: * under the License. ! 21: * ! 22: * @APPLE_LICENSE_HEADER_END@ ! 23: */ ! 24: ! 25: @protocol MiscService ! 26: ! 27: - (PMUStatus)sendMiscCommand :(UInt32)Command ! 28: :(UInt32)SLength ! 29: :(UInt8 *)SBuffer ! 30: :(UInt8 *)RBuffer ! 31: :(UInt32)RefNum ! 32: :(id)Id ! 33: :(pmCallback_func)Callback; ! 34: ! 35: @end ! 36: ! 37: ! 38: enum { ! 39: kPMUpowerCntl = 0x10, // power plane/clock control ! 40: kPMUpower1Cntl = 0x11, // more power control (DBLite) ! 41: kPMUpowerRead = 0x18, // power plane/clock status ! 42: kPMUpower1Read = 0x19, // more power status (DBLite) ! 43: ! 44: kPMUpMgrADB = 0x20, // send ADB command ! 45: kPMUpMgrADBoff = 0x21, // turn ADB auto-poll off ! 46: kPMUreadADB = 0x28, // Apple Desktop Bus ! 47: kPMUpMgrADBInt = 0x2F, // get ADB interrupt data (Portable only) ! 48: ! 49: kPMUtimeWrite = 0x30, // write the time to the clock chip ! 50: kPMUpramWrite = 0x31, // write the original 20 bytes of PRAM (Portable only) ! 51: kPMUxPramWrite = 0x32, // write extended PRAM byte(s) ! 52: kPMUNVRAMWrite = 0x33, // write NVRAM byte ! 53: kPMUtimeRead = 0x38, // read the time from the clock chip ! 54: kPMUpramRead = 0x39, // read the original 20 bytes of PRAM (Portable only) ! 55: kPMUxPramRead = 0x3A, // read extended PRAM byte(s) ! 56: kPMUNVRAMRead = 0x3B, // read NVRAM byte ! 57: kPMUSetContrast = 0x40, // set screen contrast ! 58: kPMUReadContrast = 0x48, // read the contrast value ! 59: kPMUReadBrightness = 0x49, // read the brightness value ! 60: kPMUDoPCMCIAEject = 0x4C, // eject PCMCIA card(s) ! 61: kPMUDoMediaBayDisp = 0x4D, // (MS 5/17/96) Get Media bay device status ! 62: kPMUDisplayDisp = 0x4F, // Get raw Contrast numbers ! 63: kPMUmodemSet = 0x50, // internal modem control ! 64: kPMUmodemClrFIFO = 0x51, // clear modem fifo's ! 65: kPMUmodemSetFIFOIntMask = 0x52, // set the mask for fifo interrupts ! 66: kPMUmodemWriteData = 0x54, // write data to modem ! 67: kPMUmodemSetDataMode = 0x55, // ! 68: kPMUmodemSetFloCtlMode = 0x56, // ! 69: kPMUmodemDAACnt = 0x57, // ! 70: kPMUmodemRead = 0x58, // internal modem status ! 71: kPMUmodemDAAID = 0x59, // ! 72: kPMUmodemGetFIFOCnt = 0x5A, // ! 73: kPMUmodemSetMaxFIFOSize = 0x5B, // ! 74: kPMUmodemReadFIFOData = 0x5C, // ! 75: kPMUmodemExtend = 0x5D, // ! 76: ! 77: kPMUsetBattWarning = 0x60, // set low power warning and cutoff battery levels (PowerBook 140/170, DBLite) ! 78: kPMUsetCutoff = 0x61, // set hardware cutoff voltage<H44> ! 79: kPMUnewSetBattWarn = 0x62, // set low power warning and 10 second battery levels (Epic/Mustang) ! 80: kPMUnewGetBattWarn = 0x63, // get low power warning and 10 second battery levels (Epic/Mustang) ! 81: kPMUbatteryRead = 0x68, // read battery/charger level and status ! 82: kPMUbatteryNow = 0x69, // read battery/charger instantaneous level and status ! 83: kPMUreadBattWarning = 0x6A, // read low power warning and cutoff battery levels (PowerBook 140/170, DBLite) ! 84: kPMUreadExtBatt = 0x6B, // read extended battery/charger level and status (DBLite) ! 85: kPMUreadBatteryID = 0x6C, // read the battery ID ! 86: kPMUreadBatteryInfo = 0x6D, // return battery parameters ! 87: kPMUGetSOB = 0x6F, // Get Smarts of Battery ! 88: ! 89: kPMUSetModem1SecInt = 0x70, // ! 90: kPMUSetModemInts = 0x71, // turn modem interrupts on/off ! 91: kPMUreadINT = 0x78, // get PMGR interrupt data ! 92: kPMUReadModemInts = 0x79, // read modem interrupt status ! 93: kPMUPmgrPWRoff = 0x7E, // turn system power off ! 94: kPMUsleepReq = 0x7F, // put the system to sleep (sleepSig='MATT') ! 95: kPMUsleepAck = 0x70, // sleep acknowledge ! 96: ! 97: kPMUtimerSet = 0x80, // set the wakeup timer ! 98: kPMUtimerRead = 0x88, // read the wakeup timer setting ! 99: ! 100: kPMUsoundSet = 0x90, // sound power control ! 101: kPMUSetDFAC = 0x91, // set DFAC register (DBLite) ! 102: kPMUsoundRead = 0x98, // read sound power state ! 103: kPMUReadDFAC = 0x99, // read DFAC register (DBLite) ! 104: ! 105: kPMUmodemWriteReg = 0xA0, // Write Modem Register ! 106: kPMUmodemClrRegBits = 0xA1, // Clear Modem Register Bits ! 107: kPMUmodemSetRegBits = 0xA2, // Set Modem Register Bits ! 108: kPMUmodemWriteDSPRam = 0xA3, // Write DSP RAM ! 109: kPMUmodemSetFilterCoeff = 0xA4, // Set Filter Coefficients ! 110: kPMUmodemReset = 0xA5, // Reset Modem ! 111: kPMUmodemUNKNOWN = 0xA6, // <filler for now> ! 112: kPMUmodemReadReg = 0xA8, // Read Modem Register ! 113: kPMUmodemReadDSPRam = 0xAB, // Read DSP RAM ! 114: ! 115: kPMUresetCPU = 0xD0, // reset the CPU ! 116: kPMUreadAtoD = 0xD8, // read A/D channel ! 117: kPMUreadButton = 0xD9, // read button values on Channel 0 = Brightness, Channel 1 = Contrast 0-31 ! 118: kPMUreadExtSwitches = 0xDC, // read external switch status (DBLite) ! 119: ! 120: kPMUwritePmgrRAM = 0xE0, // write to internal PMGR RAM ! 121: kPMUdownloadFlash = 0xE1, // download Flash memory ! 122: kPMUsetMachineAttr = 0xE3, // set machine id ! 123: kPMUreadPmgrRAM = 0xE8, // read from internal PMGR RAM ! 124: kPMUreadPmgrVers = 0xEA, // read the PMGR version number ! 125: kPMUreadMachineAttr = 0xEB, // read the machine id ! 126: kPMUPmgrSelfTest = 0xEC, // run the PMGR selftest ! 127: kPMUDBPMgrTest = 0xED, // DON'T USE THIS!! ! 128: kPMUFactoryTest = 0xEE, // hook for factory requests ! 129: kPMUPmgrSoftReset = 0xEF // soft reset of the PMGR ! 130: };
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.