|
|
1.1 ! root 1: /* ! 2: * Copyright (c) 1999 Apple Computer, Inc. All rights reserved. ! 3: * ! 4: * @APPLE_LICENSE_HEADER_START@ ! 5: * ! 6: * Portions Copyright (c) 1999 Apple Computer, Inc. All Rights ! 7: * Reserved. This file contains Original Code and/or Modifications of ! 8: * Original Code as defined in and that are subject to the Apple Public ! 9: * Source License Version 1.1 (the "License"). You may not use this file ! 10: * except in compliance with the License. Please obtain a copy of the ! 11: * License at http://www.apple.com/publicsource and read it before using ! 12: * this file. ! 13: * ! 14: * The Original Code and all software distributed under the License are ! 15: * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER ! 16: * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, ! 17: * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, ! 18: * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the ! 19: * License for the specific language governing rights and limitations ! 20: * under the License. ! 21: * ! 22: * @APPLE_LICENSE_HEADER_END@ ! 23: */ ! 24: ! 25: /* Copyright (c) 1995 NeXT Computer, Inc. All Rights Reserved */ ! 26: /*- ! 27: * Copyright (c) 1982, 1986, 1992, 1993 ! 28: * The Regents of the University of California. All rights reserved. ! 29: * ! 30: * Redistribution and use in source and binary forms, with or without ! 31: * modification, are permitted provided that the following conditions ! 32: * are met: ! 33: * 1. Redistributions of source code must retain the above copyright ! 34: * notice, this list of conditions and the following disclaimer. ! 35: * 2. Redistributions in binary form must reproduce the above copyright ! 36: * notice, this list of conditions and the following disclaimer in the ! 37: * documentation and/or other materials provided with the distribution. ! 38: * 3. All advertising materials mentioning features or use of this software ! 39: * must display the following acknowledgement: ! 40: * This product includes software developed by the University of ! 41: * California, Berkeley and its contributors. ! 42: * 4. Neither the name of the University nor the names of its contributors ! 43: * may be used to endorse or promote products derived from this software ! 44: * without specific prior written permission. ! 45: * ! 46: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ! 47: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ! 48: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ! 49: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE ! 50: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ! 51: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ! 52: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ! 53: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ! 54: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ! 55: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ! 56: * SUCH DAMAGE. ! 57: * ! 58: * @(#)gmon.h 8.2 (Berkeley) 1/4/94 ! 59: */ ! 60: ! 61: #ifndef _SYS_GMON_H_ ! 62: #define _SYS_GMON_H_ ! 63: ! 64: /* ! 65: * Structure prepended to gmon.out profiling data file. ! 66: */ ! 67: struct gmonhdr { ! 68: u_long lpc; /* base pc address of sample buffer */ ! 69: u_long hpc; /* max pc address of sampled buffer */ ! 70: int ncnt; /* size of sample buffer (plus this header) */ ! 71: int version; /* version number */ ! 72: int profrate; /* profiling clock rate */ ! 73: int spare[3]; /* reserved */ ! 74: }; ! 75: #define GMONVERSION 0x00051879 ! 76: ! 77: /* ! 78: * histogram counters are unsigned shorts (according to the kernel). ! 79: */ ! 80: #define HISTCOUNTER unsigned short ! 81: ! 82: /* ! 83: * fraction of text space to allocate for histogram counters here, 1/2 ! 84: */ ! 85: #define HISTFRACTION 2 ! 86: ! 87: /* ! 88: * Fraction of text space to allocate for from hash buckets. ! 89: * The value of HASHFRACTION is based on the minimum number of bytes ! 90: * of separation between two subroutine call points in the object code. ! 91: * Given MIN_SUBR_SEPARATION bytes of separation the value of ! 92: * HASHFRACTION is calculated as: ! 93: * ! 94: * HASHFRACTION = MIN_SUBR_SEPARATION / (2 * sizeof(short) - 1); ! 95: * ! 96: * For example, on the VAX, the shortest two call sequence is: ! 97: * ! 98: * calls $0,(r0) ! 99: * calls $0,(r0) ! 100: * ! 101: * which is separated by only three bytes, thus HASHFRACTION is ! 102: * calculated as: ! 103: * ! 104: * HASHFRACTION = 3 / (2 * 2 - 1) = 1 ! 105: * ! 106: * Note that the division above rounds down, thus if MIN_SUBR_FRACTION ! 107: * is less than three, this algorithm will not work! ! 108: * ! 109: * In practice, however, call instructions are rarely at a minimal ! 110: * distance. Hence, we will define HASHFRACTION to be 2 across all ! 111: * architectures. This saves a reasonable amount of space for ! 112: * profiling data structures without (in practice) sacrificing ! 113: * any granularity. ! 114: */ ! 115: #define HASHFRACTION 2 ! 116: ! 117: /* ! 118: * percent of text space to allocate for tostructs with a minimum. ! 119: */ ! 120: #define ARCDENSITY 2 ! 121: #define MINARCS 50 ! 122: #define MAXARCS ((1 << (8 * sizeof(HISTCOUNTER))) - 2) ! 123: ! 124: struct tostruct { ! 125: u_long selfpc; ! 126: long count; ! 127: u_short link; ! 128: u_short order; ! 129: }; ! 130: ! 131: /* ! 132: * a raw arc, with pointers to the calling site and ! 133: * the called site and a count. ! 134: */ ! 135: struct rawarc { ! 136: u_long raw_frompc; ! 137: u_long raw_selfpc; ! 138: long raw_count; ! 139: }; ! 140: ! 141: /* ! 142: * general rounding functions. ! 143: */ ! 144: #define ROUNDDOWN(x,y) (((x)/(y))*(y)) ! 145: #define ROUNDUP(x,y) ((((x)+(y)-1)/(y))*(y)) ! 146: ! 147: /* ! 148: * The profiling data structures are housed in this structure. ! 149: */ ! 150: struct gmonparam { ! 151: int state; ! 152: u_short *kcount; ! 153: u_long kcountsize; ! 154: u_short *froms; ! 155: u_long fromssize; ! 156: struct tostruct *tos; ! 157: u_long tossize; ! 158: long tolimit; ! 159: u_long lowpc; ! 160: u_long highpc; ! 161: u_long textsize; ! 162: u_long hashfraction; ! 163: }; ! 164: extern struct gmonparam _gmonparam; ! 165: ! 166: /* ! 167: * Possible states of profiling. ! 168: */ ! 169: #define GMON_PROF_ON 0 ! 170: #define GMON_PROF_BUSY 1 ! 171: #define GMON_PROF_ERROR 2 ! 172: #define GMON_PROF_OFF 3 ! 173: ! 174: /* ! 175: * Sysctl definitions for extracting profiling information from the kernel. ! 176: */ ! 177: #define GPROF_STATE 0 /* int: profiling enabling variable */ ! 178: #define GPROF_COUNT 1 /* struct: profile tick count buffer */ ! 179: #define GPROF_FROMS 2 /* struct: from location hash bucket */ ! 180: #define GPROF_TOS 3 /* struct: destination/count structure */ ! 181: #define GPROF_GMONPARAM 4 /* struct: profiling parameters (see above) */ ! 182: ! 183: /* ! 184: * In order to support more information than in the original mon.out and ! 185: * gmon.out files there is an alternate gmon.out file format. The alternate ! 186: * gmon.out file format starts with a magic number then separates the ! 187: * information with gmon_data structs. ! 188: */ ! 189: #define GMON_MAGIC 0xbeefbabe ! 190: struct gmon_data { ! 191: unsigned long type; /* constant for type of data following this struct */ ! 192: unsigned long size; /* size in bytes of the data following this struct */ ! 193: }; ! 194: ! 195: /* ! 196: * The GMONTYPE_SAMPLES gmon_data.type is for the histogram counters described ! 197: * above and has a struct gmonhdr followed by the counters. ! 198: */ ! 199: #define GMONTYPE_SAMPLES 1 ! 200: /* ! 201: * The GMONTYPE_RAWARCS gmon_data.type is for the raw arcs described above. ! 202: */ ! 203: #define GMONTYPE_RAWARCS 2 ! 204: /* ! 205: * The GMONTYPE_ARCS_ORDERS gmon_data.type is for the raw arcs with a call ! 206: * order field. The order is the order is a sequence number for the order each ! 207: * call site was executed. Raw_order values start at 1 not zero. Other than ! 208: * the raw_order field this is the same information as in the struct rawarc. ! 209: */ ! 210: #define GMONTYPE_ARCS_ORDERS 3 ! 211: struct rawarc_order { ! 212: unsigned long raw_frompc; ! 213: unsigned long raw_selfpc; ! 214: unsigned long raw_count; ! 215: unsigned long raw_order; ! 216: }; ! 217: /* ! 218: * The GMONTYPE_DYLD_STATE gmon_data.type is for the dynamic link editor state ! 219: * of the program. ! 220: * The informations starts with an unsigned long with the count of states: ! 221: * image_count ! 222: * Then each state follows in the file. The state is made up of ! 223: * image_header (the address where dyld loaded this image) ! 224: * vmaddr_slide (the amount dyld slid this image from it's vmaddress) ! 225: * name (the file name dyld loaded this image from) ! 226: */ ! 227: #define GMONTYPE_DYLD_STATE 4 ! 228: #endif /* !_SYS_GMON_H_ */
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.