|
|
1.1 ! root 1: /* ! 2: * Copyright (c) 1999 Apple Computer, Inc. All rights reserved. ! 3: * ! 4: * @APPLE_LICENSE_HEADER_START@ ! 5: * ! 6: * Portions Copyright (c) 1999 Apple Computer, Inc. All Rights ! 7: * Reserved. This file contains Original Code and/or Modifications of ! 8: * Original Code as defined in and that are subject to the Apple Public ! 9: * Source License Version 1.1 (the "License"). You may not use this file ! 10: * except in compliance with the License. Please obtain a copy of the ! 11: * License at http://www.apple.com/publicsource and read it before using ! 12: * this file. ! 13: * ! 14: * The Original Code and all software distributed under the License are ! 15: * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER ! 16: * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, ! 17: * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, ! 18: * FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT. Please see the ! 19: * License for the specific language governing rights and limitations ! 20: * under the License. ! 21: * ! 22: * @APPLE_LICENSE_HEADER_END@ ! 23: */ ! 24: ! 25: /* Copyright (c) 1995 NeXT Computer, Inc. All Rights Reserved */ ! 26: /*- ! 27: * Copyright (c) 1982, 1988, 1991, 1993 ! 28: * The Regents of the University of California. All rights reserved. ! 29: * (c) UNIX System Laboratories, Inc. ! 30: * All or some portions of this file are derived from material licensed ! 31: * to the University of California by American Telephone and Telegraph ! 32: * Co. or Unix System Laboratories, Inc. and are reproduced herein with ! 33: * the permission of UNIX System Laboratories, Inc. ! 34: * ! 35: * Redistribution and use in source and binary forms, with or without ! 36: * modification, are permitted provided that the following conditions ! 37: * are met: ! 38: * 1. Redistributions of source code must retain the above copyright ! 39: * notice, this list of conditions and the following disclaimer. ! 40: * 2. Redistributions in binary form must reproduce the above copyright ! 41: * notice, this list of conditions and the following disclaimer in the ! 42: * documentation and/or other materials provided with the distribution. ! 43: * 3. All advertising materials mentioning features or use of this software ! 44: * must display the following acknowledgement: ! 45: * This product includes software developed by the University of ! 46: * California, Berkeley and its contributors. ! 47: * 4. Neither the name of the University nor the names of its contributors ! 48: * may be used to endorse or promote products derived from this software ! 49: * without specific prior written permission. ! 50: * ! 51: * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ! 52: * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ! 53: * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ! 54: * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE ! 55: * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL ! 56: * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS ! 57: * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) ! 58: * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ! 59: * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ! 60: * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF ! 61: * SUCH DAMAGE. ! 62: * ! 63: * @(#)systm.h 8.7 (Berkeley) 3/29/95 ! 64: */ ! 65: ! 66: /* ! 67: * The `securelevel' variable controls the security level of the system. ! 68: * It can only be decreased by process 1 (/sbin/init). ! 69: * ! 70: * Security levels are as follows: ! 71: * -1 permannently insecure mode - always run system in level 0 mode. ! 72: * 0 insecure mode - immutable and append-only flags make be turned off. ! 73: * All devices may be read or written subject to permission modes. ! 74: * 1 secure mode - immutable and append-only flags may not be changed; ! 75: * raw disks of mounted filesystems, /dev/mem, and /dev/kmem are ! 76: * read-only. ! 77: * 2 highly secure mode - same as (1) plus raw disks are always ! 78: * read-only whether mounted or not. This level precludes tampering ! 79: * with filesystems by unmounting them, but also inhibits running ! 80: * newfs while the system is secured. ! 81: * ! 82: * In normal operation, the system runs in level 0 mode while single user ! 83: * and in level 1 mode while multiuser. If level 2 mode is desired while ! 84: * running multiuser, it can be set in the multiuser startup script ! 85: * (/etc/rc.local) using sysctl(1). If it is desired to run the system ! 86: * in level 0 mode while multiuser, initialize the variable securelevel ! 87: * in /sys/kern/kern_sysctl.c to -1. Note that it is NOT initialized to ! 88: * zero as that would allow the vmunix binary to be patched to -1. ! 89: * Without initialization, securelevel loads in the BSS area which only ! 90: * comes into existence when the kernel is loaded and hence cannot be ! 91: * patched by a stalking hacker. ! 92: */ ! 93: ! 94: #ifndef _SYS_SYSTM_H_ ! 95: #define _SYS_SYSTM_H_ ! 96: ! 97: #include <sys/types.h> ! 98: #include <sys/time.h> ! 99: #include <sys/tty.h> ! 100: #include <sys/vm.h> ! 101: ! 102: extern int securelevel; /* system security level */ ! 103: extern const char *panicstr; /* panic message */ ! 104: extern char version[]; /* system version */ ! 105: extern char copyright[]; /* system copyright */ ! 106: ! 107: extern int nblkdev; /* number of entries in bdevsw */ ! 108: extern int nchrdev; /* number of entries in cdevsw */ ! 109: ! 110: extern dev_t rootdev; /* root device */ ! 111: extern struct vnode *rootvp; /* vnode equivalent to above */ ! 112: ! 113: extern struct sysent { /* system call table */ ! 114: int16_t sy_narg; /* number of args */ ! 115: int16_t sy_parallel;/* can execute in parallel */ ! 116: int32_t (*sy_call)(); /* implementing function */ ! 117: } sysent[]; ! 118: extern int nsysent; ! 119: ! 120: extern int boothowto; /* reboot flags, from console subsystem */ ! 121: extern int show_space; ! 122: ! 123: #include <sys/cdefs.h> ! 124: ! 125: /* ! 126: * General function declarations. ! 127: */ ! 128: int nullop __P((void)); ! 129: int enodev (); /* avoid actual prototype for multiple use */ ! 130: void enodev_strat(); ! 131: int nulldev(); ! 132: int enoioctl __P((void)); ! 133: int enxio __P((void)); ! 134: int eopnotsupp __P((void)); ! 135: int einval __P((void)); ! 136: int seltrue __P((dev_t dev, int which, struct proc *p)); ! 137: void *hashinit __P((int count, int type, u_long *hashmask)); ! 138: int nosys __P((struct proc *, void *, register_t *)); ! 139: ! 140: #ifdef __GNUC__ ! 141: volatile void panic __P((const char *, ...)); ! 142: #else ! 143: void panic __P((const char *, ...)); ! 144: #endif ! 145: void tablefull __P((const char *)); ! 146: void addlog __P((const char *, ...)); ! 147: void log __P((int, const char *, ...)); ! 148: void printf __P((const char *, ...)) __attribute__ ((format (printf, 1, 2))); ! 149: int sprintf __P((char *buf, const char *, ...)) __attribute__ ((format (printf, 2, 3))); ! 150: void kprintf __P((const char *, ...)) __attribute__ ((format (printf, 1, 2))); ! 151: void ttyprintf __P((struct tty *, const char *, ...)) __attribute__ ((format (printf, 2, 3))); ! 152: ! 153: void bcopy __P((const void *from, void *to, size_t len)); ! 154: void ovbcopy __P((const void *from, void *to, size_t len)); ! 155: void bzero __P((void *buf, size_t len)); ! 156: ! 157: int copystr __P((void *kfaddr, void *kdaddr, size_t len, size_t *done)); ! 158: int copyinstr __P((void *udaddr, void *kaddr, size_t len, size_t *done)); ! 159: int copyoutstr __P((void *kaddr, void *udaddr, size_t len, size_t *done)); ! 160: int copyin __P((void *udaddr, void *kaddr, size_t len)); ! 161: int copyout __P((void *kaddr, void *udaddr, size_t len)); ! 162: int copywithin __P((void *saddr, void *daddr, size_t len)); ! 163: ! 164: int fubyte __P((void *base)); ! 165: #ifdef notdef ! 166: int fuibyte __P((void *base)); ! 167: #endif ! 168: int subyte __P((void *base, int byte)); ! 169: int suibyte __P((void *base, int byte)); ! 170: long fuword __P((void *base)); ! 171: long fuiword __P((void *base)); ! 172: int suword __P((void *base, long word)); ! 173: int suiword __P((void *base, long word)); ! 174: ! 175: int hzto __P((struct timeval *tv)); ! 176: typedef void (*timeout_fcn_t)(void *); ! 177: void timeout __P((void (*)(void *), void *arg, int ticks)); ! 178: int untimeout __P((void (*)(void *), void *arg)); ! 179: void realitexpire __P((void *)); ! 180: ! 181: void hardclock __P((caddr_t pc, int ps)); ! 182: void gatherstats __P((caddr_t pc, int ps)); ! 183: ! 184: void initclocks __P((void)); ! 185: ! 186: void startprofclock __P((struct proc *)); ! 187: void stopprofclock __P((struct proc *)); ! 188: void setstatclockrate __P((int hzrate)); ! 189: ! 190: #include <libkern/libkern.h> ! 191: ! 192: #ifdef DDB ! 193: /* debugger entry points */ ! 194: int Debugger __P((void)); /* in DDB only */ ! 195: int read_symtab_from_file __P((struct proc *,struct vnode *,const char *)); ! 196: #endif ! 197: #endif /* !_SYS_SYSTM_H_ */ ! 198:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.