![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to aha1542.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Early Linux] / linux / kernel / blk_drv / scsi|
Return to aha1542.h CVS log | Up to [Early Linux] / linux / kernel / blk_drv / scsi |
1.1 root 1: #ifndef _AHA1542_H
2:
1.1.1.3 ! root 3: /* $Id: aha1542.h,v 1.1 1992/07/24 06:27:38 root Exp root $
1.1 root 4: *
5: * Header file for the adaptec 1542 driver for Linux
6: *
7: * $Log: aha1542.h,v $
1.1.1.3 ! root 8: * Revision 1.1 1992/07/24 06:27:38 root
! 9: * Initial revision
! 10: *
! 11: * Revision 1.2 1992/07/04 18:41:49 root
! 12: * Replaced distribution with current drivers
! 13: *
! 14: * Revision 1.3 1992/06/23 23:58:20 root
! 15: * Fixes.
! 16: *
! 17: * Revision 1.2 1992/05/26 22:13:23 root
! 18: * Changed bug that prevented DMA above first 2 mbytes.
! 19: *
! 20: * Revision 1.1 1992/05/22 21:00:29 root
! 21: * Initial revision
! 22: *
1.1 root 23: * Revision 1.1 1992/04/24 18:01:50 root
24: * Initial revision
25: *
26: * Revision 1.1 1992/04/02 03:23:13 drew
27: * Initial revision
28: *
29: * Revision 1.3 1992/01/27 14:46:29 tthorn
30: * *** empty log message ***
31: *
32: */
33:
1.1.1.3 ! root 34: #include <linux/types.h>
! 35:
1.1 root 36: /* I/O Port interface 4.2 */
37: /* READ */
38: #define STATUS base
39: #define STST 0x80 /* Self Test in Progress */
40: #define DIAGF 0x40 /* Internal Diagonostic Failure */
41: #define INIT 0x20 /* Mailbox Initialization Required */
42: #define IDLE 0x10 /* SCSI Host Adapter Idle */
43: #define CDF 0x08 /* Command/Data Out Port Full */
44: #define DF 0x04 /* Data In Port Full */
45: #define INVDCMD 0x01 /* Invalid H A Command */
46: #define STATMASK 0xfd /* 0x02 is reserved */
47:
48: #define INTRFLAGS STATUS+2
49: #define ANYINTR 0x80 /* Any Interrupt */
50: #define SCRD 0x08 /* SCSI Reset Detected */
51: #define HACC 0x04 /* HA Command Complete */
52: #define MBOA 0x02 /* MBO Empty */
53: #define MBIF 0x01 /* MBI Full */
54: #define INTRMASK 0x8f
55:
56: /* WRITE */
57: #define CONTROL STATUS
58: #define HRST 0x80 /* Hard Reset */
59: #define SRST 0x40 /* Soft Reset */
60: #define IRST 0x20 /* Interrupt Reset */
61: #define SCRST 0x10 /* SCSI Bus Reset */
62:
63: /* READ/WRITE */
64: #define DATA STATUS+1
65: #define CMD_NOP 0x00 /* No Operation */
66: #define CMD_MBINIT 0x01 /* Mailbox Initialization */
67: #define CMD_START_SCSI 0x02 /* Start SCSI Command */
68: #define CMD_INQUIRY 0x04 /* Adapter Inquiry */
69: #define CMD_EMBOI 0x05 /* Enable MailBox Out Interrupt */
70: #define CMD_BUSON_TIME 0x07 /* Set Bus-On Time */
71: #define CMD_BUSOFF_TIME 0x08 /* Set Bus-Off Time */
72: #define CMD_RETDEVS 0x0a /* Return Installed Devices */
73: #define CMD_RETCONF 0x0b /* Return Configuration Data */
74: #define CMD_RETSETUP 0x0d /* Return Setup Data */
75: #define CMD_ECHO 0x1f /* ECHO Command Data */
76:
77: /* Mailbox Definition 5.2.1 and 5.2.2 */
78: struct mailbox {
79: unchar status; /* Command/Status */
80: unchar ccbptr[3]; /* msb, .., lsb */
81: };
82:
83: /* These belong in scsi.h also */
1.1.1.3 ! root 84: #define any2scsi(up, p) \
! 85: (up)[0] = (((unsigned long)(p)) >> 16) ; \
! 86: (up)[1] = (((unsigned long)(p)) >> 8); \
! 87: (up)[2] = ((unsigned long)(p));
1.1 root 88:
89: #define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
90:
91: #define xany2scsi(up, p) \
92: (up)[0] = ((long)(p)) >> 24; \
93: (up)[1] = ((long)(p)) >> 16; \
94: (up)[2] = ((long)(p)) >> 8; \
95: (up)[3] = ((long)(p));
96:
97: #define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
98: + (((long)(up)[2]) << 8) + ((long)(up)[3]) )
99:
100: #define MAX_CDB 12
101: #define MAX_SENSE 14
102:
103: struct ccb { /* Command Control Block 5.3 */
104: unchar op; /* Command Control Block Operation Code */
105: unchar idlun; /* op=0,2:Target Id, op=1:Initiator Id */
106: /* Outbound data transfer, length is checked*/
107: /* Inbound data transfer, length is checked */
108: /* Logical Unit Number */
109: unchar cdblen; /* SCSI Command Length */
110: unchar rsalen; /* Request Sense Allocation Length/Disable */
111: unchar datalen[3]; /* Data Length (msb, .., lsb) */
112: unchar dataptr[3]; /* Data Pointer */
113: unchar linkptr[3]; /* Link Pointer */
114: unchar commlinkid; /* Command Linking Identifier */
115: unchar hastat; /* Host Adapter Status (HASTAT) */
116: unchar tarstat; /* Target Device Status */
117: unchar reserved[2];
118: unchar cdb[MAX_CDB+MAX_SENSE];/* SCSI Command Descriptor Block */
119: /* REQUEST SENSE */
120: };
121:
122: int aha1542_detect(int);
123: int aha1542_command(unsigned char target, const void *cmnd, void *buff, int bufflen);
1.1.1.3 ! root 124: int aha1542_queuecommand(unchar target, const void *cmnd, void *buff, int bufflen, void (*done)(int, int));
1.1 root 125: int aha1542_abort(int);
126: char *aha1542_info(void);
127: int aha1542_reset(void);
128:
129: #ifndef NULL
130: #define NULL 0
131: #endif
132:
133: #define AHA1542 {"Adaptec 1542", aha1542_detect, \
134: aha1542_info, aha1542_command, \
1.1.1.3 ! root 135: aha1542_queuecommand, \
1.1 root 136: aha1542_abort, \
137: aha1542_reset, \
1.1.1.3 ! root 138: 1, 7, 0}
1.1 root 139: #endif
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.