--- nono/debugger/debugger.cpp 2026/04/29 17:04:33 1.1.1.3 +++ nono/debugger/debugger.cpp 2026/04/29 17:04:37 1.1.1.4 @@ -15,6 +15,7 @@ #include static Debugger *gDebugger; +BreakpointMonitor *gBreakpointMonitor; CVPrompt *gCVPrompt; static void *debugger_run(void *); @@ -27,6 +28,7 @@ debugger_init() gDebugger = new Debugger(); gDebugger->Init(); + gBreakpointMonitor = new BreakpointMonitor(); gCVPrompt = new CVPrompt(); // デバッガスレッド起動 @@ -68,9 +70,28 @@ Debugger::Init() } // -b ならブレークポイント設定 - for (auto& b : gMainApp.debug_breakaddr) { + for (auto& str : gMainApp.debug_breakaddr) { + breakpoint_t bp; + md->ReqSet(CPU_REQ_TRACE); - AddBreakpoint(b, false); + + // , で分離できたら を取り出す + int pos = str.find(','); + if (pos != std::string::npos) { + std::string skipstr = str.substr(pos + 1); + bp.skip = atoi(skipstr.c_str()); + + // XXX これ出来るんだっけ? + str[pos] = '\0'; + } + // そしてどちらにしても を取り出す + if (!ParseAddr(str.c_str(), &bp.addr)) { + warnx("\"%s\": Invalid breakpoint address", str.c_str()); + return; + } + // 登録 + bp.type = BreakpointType::Address; + AddBreakpoint(bp); } // どこでやるべか @@ -331,21 +352,9 @@ Debugger::Check() return true; } - // アドレス - for (auto& bp : bpoint) { - if (bp.enable) { - if (bp.ismemory) { - if (md->CheckLEA(bp.addr)) { - bp.count++; - return true; - } - } else { - if (bp.addr == md->GetPC()) { - bp.count++; - return true; - } - } - } + // ブレークポイント + if (CheckAllBreakpoints()) { + return true; } // ステップアウト @@ -367,9 +376,148 @@ Debugger::Check() return false; } +// ブレークポイントがどれかでも成立するかを調べる。 +// 1つ以上成立してブレークするなら true を返す。 +// 1つも成立しておらずブレークしないなら false を返す。 +bool +Debugger::CheckAllBreakpoints() +{ + bool is_break = false; + + // 命令ごとにクリアする + bi_inst = 0; + bi_inst_bytes = 0; + + // 1つの条件でマッチしても(そこでブレークすること自体は確定するのだが) + // 残りの他の条件も成立すればカウントを進める必要があるため、 + // 全部処理した上でどれか一つでもブレークしたかで判断する必要がある。 + for (auto& bp : bpoint) { + switch (bp.type) { + case BreakpointType::Address: + if (bp.addr != md->GetPC()) { + continue; + } + break; + + case BreakpointType::Memory: + if (!md->CheckLEA(bp.addr)) { + continue; + } + break; + + case BreakpointType::Exception: + if (bv_vector >= 0) { + if (bp.vec1 <= bv_vector && bv_vector <= bp.vec2) { + break; + } + } + continue; + + case BreakpointType::Instruction: + if (CheckBreakpointInst(bp) == false) { + continue; + } + break; + + default: + continue; + } + + // 条件は成立したのでカウントとスキップ + bp.matched++; + + // skip == -1 は常にブレークしない (カウントするだけ) + if (bp.skip < 0) { + continue; + } + + // skip が 1 以上なら、remain を減算 + if (bp.skip > 0 && --bp.skipremain > 0) { + continue; + } + + // ブレーク成立 + is_break = true; + } + + // 例外通知は通過ごとに常に下ろしておく + bv_vector = -1; + + // ブレークポイントが1つでも成立したかどうかを返す + return is_break; +} + +// 命令ブレークポイントが成立するか調べる。 +bool +Debugger::CheckBreakpointInst(breakpoint_t& bp) +{ + saddr_t laddr; + uint64 paddr; + + // uint32 bi_inst が現在の PC 位置の命令データ (左詰め) + // bi_inst_bytes が読み込んだバイト数(bi_inst の左からの有効バイト数)。 + // bi_need_bytes が現在のブレークポイントで読み込む必要のあるバイト数。 + + laddr.addr = md->GetPC(); + laddr.super = md->IsSuper(); + laddr.logical = true; + laddr.search = true; + // 必要なバイト数に達するまで読み足す + while (bi_inst_bytes < bi_need_bytes) { + // アドレスを求める。 + // 論理アクセスで ATC になければテーブルサーチも試みる。 + if (md->MMUEnabled()) { + paddr = md->TranslateAddr(laddr); + if ((int64)paddr < 0) { + // MMU 時点でバスエラー + return false; + } + } else { + paddr = laddr.addr; + } + + // 命令長ずつ読み込む。 + for (int i = 0; i < md->inst_bits / 8; i++) { + uint64 data = vm_phys_peek_8(paddr); + if ((int64)data < 0) { + return false; + } + bi_inst = (bi_inst << 8) | data; + bi_inst_bytes++; + laddr.addr++; + paddr++; + } + } + // 左詰めにする + bi_inst <<= (4 - bi_inst_bytes) * 8; + + // 必要なバイト数取得できたので比較 + if ((bi_inst & bp.mask) == bp.inst) { + return true; + } + return false; +} + +// 例外通知 (MPU からの連絡用) +void +debugger_notifyexception(int vector) +{ + gDebugger->NotifyException(vector); +} + +// 例外通知 (本体) +void +Debugger::NotifyException(int vector) +{ + bv_vector = vector; +} + // コマンド一覧。 // "r" から始まるレジスタ表示系コマンドはコード中で別処理してある。 /*static*/ std::vector Debugger::cmdtable = { + { "bi", &Debugger::cmd_bi, Debugger::CommandAction::Stay }, + { "bm", &Debugger::cmd_bm, Debugger::CommandAction::Stay }, + { "bv", &Debugger::cmd_bv, Debugger::CommandAction::Stay }, { "bx", &Debugger::cmd_bx, Debugger::CommandAction::Stay }, { "b", &Debugger::cmd_b, Debugger::CommandAction::Stay }, { "brhist", &Debugger::cmd_brhist, Debugger::CommandAction::Stay }, @@ -377,6 +525,7 @@ Debugger::Check() { "d", &Debugger::cmd_d, Debugger::CommandAction::Stay }, { "dt", &Debugger::cmd_dt, Debugger::CommandAction::Stay }, { "D", &Debugger::cmd_D, Debugger::CommandAction::Stay }, + { "exhist", &Debugger::cmd_exhist, Debugger::CommandAction::Stay }, { "h", &Debugger::cmd_h, Debugger::CommandAction::Stay }, { "help", &Debugger::cmd_h, Debugger::CommandAction::Stay }, { "L", &Debugger::cmd_L, Debugger::CommandAction::Stay }, @@ -412,14 +561,17 @@ Debugger::cmd_h() Debugger::HelpMsgMain = { { "b", "ブレークポイント一覧表示" }, { "b #n", "ブレークポイント n を削除" }, - { "b $", "メモリブレークポイント設定" }, - { "b ", "ブレークポイント設定" }, + { "b []", "ブレークポイント設定" }, + { "bm []", "メモリブレークポイント設定" }, + { "bi [:] []", "命令ブレークポイント設定" }, + { "bv [-] []", "例外ブレークポイント設定" }, { "bx", "ブレークポイント全削除" }, { "brhist []", "ブランチ履歴表示" }, { "c []", "実行再開(continue)" }, { "d [ []", "逆アセンブル(論理、テーブルサーチなし)" }, { "dt [ []", "逆アセンブル(論理、テーブルサーチあり)" }, { "D [ []", "逆アセンブル(物理)" }, + { "exhist []", "例外履歴表示" }, { "h", "ヘルプ(help)" }, { "L =", "ログレベル設定" }, { "m [ []", "メモリダンプ(論理、テーブルサーチなし)" }, @@ -428,9 +580,10 @@ Debugger::HelpMsgMain = { { "n ", "ステップ実行 (サブルーチンを飛ばす)" }, { "q", "quit" }, { "r*", "各種レジスタを表示 (see \"help r\")" }, + { "s []", "ステップ実行 (途中レジスタを表示しない)" }, { "so", "ステップアウト" }, { "show ", "モニター表示" }, - { "t ", "トレース実行" }, + { "t []", "トレース実行 (命令ごとにレジスタを表示)" }, }; void @@ -482,6 +635,9 @@ Debugger::ParseCmdbuf() // // ブレークポイント +// b ... 一覧表示 +// b #n ... #n を削除 +// b [] ... 設定 void Debugger::cmd_b() { @@ -495,55 +651,214 @@ Debugger::cmd_b() // # 形式なら、指定番号のブレークポイントを削除 int i = atoi(&args[1][1]); if (i < 0 || i >= bpoint.size()) { - cons->Print("invaild break point number: #%d\n", i); + cons->Print("invaild breakpoint number: #%d\n", i); return; } auto& bp = bpoint[i]; - if (bp.enable) { - cons->Print("%sbreakpoint #%d (%08x) removed\n", - bp.ismemory ? "memory " : "", i, bp.addr); - bp.enable = false; - } else { - cons->Print("breakpoint #%d not enabled\n", i); + if (bp.type == BreakpointType::Unused) { + cons->Print("invalid breakpoint number: #%d\n", i); + return; } + cons->Print("breakpoint #%d (%08x) removed\n", + i, bp.addr); + bp.type = BreakpointType::Unused; + // 今登録されている命令ブレークの必要命令長を再計算 + RecalcInstMask(); return; } - bool ismemory; - uint32 addr; - bool rv; - if (args[1][0] == '$') { - // $ 形式ならメモリブレークポイント - ismemory = true; - rv = ParseAddr(&args[1][1], &addr); + return cmd_b_set(BreakpointType::Address); +} + +// メモリブレークポイントの設定 +// bm [] +void +Debugger::cmd_bm() +{ + // XXX m68k では未サポート + if (dynamic_cast(md)) { + cons->Print("bm not supported yet on m68k\n"); + return; + } + cmd_b_set(BreakpointType::Memory); +} + +// type が違うだけの各種ブレークポイント設定の共通部分。 +void +Debugger::cmd_b_set(BreakpointType type) +{ + breakpoint_t bp; + + if (args.size() < 2) { + cons->Print("usage: %s []\n", args[0].c_str()); + return; + } + + // アドレス + if (!ParseAddr(args[1].c_str(), &bp.addr)) { + return; + } + // あればスキップカウント + if (args.size() > 2) { + bp.skip = atoi(args[2].c_str()); + } + + // 空いてるところにセット + // (よく似たエントリがあっても干渉しない) + bp.type = type; + int bi = AddBreakpoint(bp); + if (bi == -1) { + cons->Print("no free breakpoints\n"); } else { - // そうでなければアドレス指定 - ismemory = false; - rv = ParseAddr(&args[1][0], &addr); + cons->Print("breakpoint #%d added\n", bi); } - if (rv == false) { +} + +// 命令ブレークポイントの設定 +// bi [:] [] +void +Debugger::cmd_bi() +{ + breakpoint_t bp; + std::string inststr; + std::string maskstr; + int instlen; + int masklen; + + if (args.size() < 2) { + cons->Print("usage: bi [:] []\n"); return; } - // すでにあればそのブレークポイントを削除 - for (int i = 0; i < bpoint.size(); i++) { - auto& bp = bpoint[i]; - if (bp.enable && bp.ismemory == ismemory && bp.addr == addr) { - bp.enable = false; - cons->Print("%sbreakpoint #%d (%08x) removed\n", - bp.ismemory ? "memory " : "", i, bp.addr); + // 引数をまず分離 + auto pos = args[1].find(':'); + if (pos == std::string::npos) { + // マスク指定なし + inststr = args[1]; + instlen = inststr.size(); + masklen = -1; + } else { + // マスク指定あり + inststr = args[1].substr(0, pos); + instlen = inststr.size(); + maskstr = args[1].substr(pos + 1); + masklen = maskstr.size(); + } + + // 命令部チェック + if (ParseVerbHex(inststr.c_str(), &bp.inst) == false) { + cons->Print("%s: invalid instruction value\n", args[1].c_str()); + return; + } + if (instlen % (md->inst_bits / 4) != 0) { + cons->Print("%s: invalid instruction length\n", args[1].c_str()); + return; + } + + // マスク部チェック + bp.mask = 0xffffffff; + if (masklen != -1) { + if (ParseVerbHex(maskstr.c_str(), &bp.mask) == false) { + cons->Print("%s: invalid mask value\n", args[1].c_str()); + return; + } + if (masklen != instlen) { + cons->Print("%s: inst:mask must be the same length\n", + args[1].c_str()); return; } } + // 8バイト未満なら左詰め。 + if (md->inst_bits < 32 && instlen < 8) { + bp.inst <<= 32 - instlen * 4; + bp.mask <<= 32 - instlen * 4; + } + + // あればスキップカウント + bp.skip = 0; + if (args.size() > 2) { + bp.skip = atoi(args[2].c_str()); + } + + // 空いてるところにセット + bp.type = BreakpointType::Instruction; + int bi = AddBreakpoint(bp); + if (bi == -1) { + cons->Print("no free breakpoints\n"); + } else { + cons->Print("breakpoint #%d added\n", bi); + } + + // 今登録されている命令ブレークの必要命令長を再計算 + RecalcInstMask(); +} + +// 例外ブレークポイントの設定 +// bv [-] [] +void +Debugger::cmd_bv() +{ + breakpoint_t bp; + + if (args.size() < 2) { + cons->Print("usage: be [-] []\n"); + return; + } + + auto pos = args[1].find('-'); + if (pos == std::string::npos) { + // ベクタ番号が1つなら vec1, vec2 を同値にしておく。 + if (ParseVerbHex(args[1].c_str(), (uint32 *)&bp.vec1) == false) { + cons->Print("%s: invalid vector number\n", args[1].c_str()); + return; + } + bp.vec2 = bp.vec1; + } else { + // ベクタ番号(範囲指定 [vec1, vec2]) + std::string str1 = args[1].substr(0, pos); + std::string str2 = args[1].substr(pos + 1); + + if (ParseVerbHex(str1.c_str(), (uint32 *)&bp.vec1) == false) { + cons->Print("%s: invalid first vector number\n", args[1].c_str()); + return; + } + if (ParseVerbHex(str2.c_str(), (uint32 *)&bp.vec2) == false) { + cons->Print("%s: invalid last vector number\n", args[1].c_str()); + return; + } + } + + // 範囲チェック + if (bp.vec1 < 0 || bp.vec1 >= md->vector_max) { + cons->Print("$%x: invalid vector number\n", bp.vec1); + return; + } + if (bp.vec2 < 0 || bp.vec2 >= md->vector_max) { + cons->Print("$%x: invalid last vector number\n", bp.vec2); + return; + } + + // 大小が逆なら入れ替える? + if (bp.vec1 > bp.vec2) { + int tmp; + tmp = bp.vec1; + bp.vec1 = bp.vec2; + bp.vec2 = tmp; + } + + // あればスキップカウント + bp.skip = 0; + if (args.size() > 2) { + bp.skip = atoi(args[2].c_str()); + } // 空いてるところにセット - int bi = AddBreakpoint(addr, ismemory); + bp.type = BreakpointType::Exception; + int bi = AddBreakpoint(bp); if (bi == -1) { - cons->Print("no free breakpoints!\n"); + cons->Print("no free breakpoints\n"); } else { - auto& bp = bpoint[bi]; - cons->Print("%sbreakpoint #%d (%08x) added\n", - bp.ismemory ? "memory " : "", bi, bp.addr); + cons->Print("breakpoint #%d added\n", bi); } } @@ -551,20 +866,86 @@ Debugger::cmd_b() void Debugger::cmd_b_list() { - int found = 0; + ShowMonitor(*gBreakpointMonitor); +} + +// ブレークポイント一覧 (モニタ) +void +Debugger::MonitorBreakpoint(TextScreen& monitor) +{ + // 0 1 2 3 4 5 6 + // 0123456789012345678901234567890123456789012345678901234567890 + // No Type Parameter Matched Skip + // #0 addr $01234567 123456789 123456789/123456789 + // #1 inst 00000000/00000000 + // #2 excp $00-$00 + + monitor.Clear(); + monitor.Print(0, 0, "No Type Parameter"); + monitor.Print(26, 0, "Matched"); + monitor.Print(37, 0, "Skip"); for (int i = 0; i < bpoint.size(); i++) { - auto& bp = bpoint[i]; - if (bp.enable) { - cons->Print(" #%d %s%08x %d\n", - i, - bp.ismemory ? "memory $" : "", - bp.addr, bp.count); - found = 1; + const auto& bp = bpoint[i]; + int y = i + 1; + + monitor.Print(0, y, "#%d", i); + + // 種別ごとの表示 + switch (bp.type) { + case BreakpointType::Unused: + continue; + + case BreakpointType::Address: + monitor.Print(3, y, "addr $%08x", bp.addr); + break; + case BreakpointType::Memory: + monitor.Print(3, y, "mem $%08x", bp.addr); + break; + + case BreakpointType::Exception: + monitor.Print(3, y, "excp $%02x", bp.vec1); + if (bp.vec2 != bp.vec1) { + monitor.Print(11, y, "-$%02x", bp.vec2); + } + break; + + case BreakpointType::Instruction: + monitor.Print(3, y, "inst"); + if (md->inst_bits == 32) { + if (bp.mask == 0xffffffff) { + monitor.Print(8, y, "%08x", bp.inst); + } else { + monitor.Print(8, y, "%08x:%08x", bp.inst, bp.mask); + } + } else { + if (bp.mask == 0xffffffff) { + monitor.Print(8, y, "%08x", bp.inst); + } else if (((bp.inst | bp.mask) & 0x0000ffff) != 0) { + monitor.Print(8, y, "%08x:%08x", bp.inst, bp.mask); + } else if (bp.mask == 0xffff0000) { + monitor.Print(8, y, "%04x", bp.inst >> 16); + } else { + monitor.Print(8, y, "%04x:%04x", + bp.inst >> 16, bp.mask >> 16); + } + } + break; + + default: + monitor.Print(3, y, "type=%d", (int)bp.type); + continue; + } + + // マッチ回数 + monitor.Print(26, y, "%d", bp.matched); + + // スキップ + if (bp.skip < 0) { + monitor.Print(37, y, "forever"); + } else if (bp.skip > 0) { + monitor.Print(37, y, "%d / %d", (bp.skip - bp.skipremain), bp.skip); } - } - if (found == 0) { - cons->Print(" No breakpoints enabled\n"); } } @@ -573,56 +954,131 @@ void Debugger::cmd_bx() { for (auto& bp : bpoint) { - bp.enable = false; + bp.type = BreakpointType::Unused; } cons->Print(" All breakpoints disabled\n"); + + // 今登録されている命令ブレークの必要命令長を再計算 + RecalcInstMask(); } // ブレークポイントを設定。 -// 設定できればその番号、できなければ -1 を返す -// TODO 重複の処理とか +// new_bp のうち matched, skipremain はこちらで初期化する。 +// それ以外を埋めてから呼ぶこと。 +// 設定できればその番号、できなければ -1 を返す。 int -Debugger::AddBreakpoint(uint32 addr, bool ismemory) +Debugger::AddBreakpoint(const breakpoint_t& new_bp) { for (int i = 0; i < bpoint.size(); i++) { auto& bp = bpoint[i]; - if (!bp.enable) { - bp.enable = true; - bp.addr = addr; - bp.ismemory = ismemory; - bp.count = 0; + if (bp.type == BreakpointType::Unused) { + bp = new_bp; + bp.matched = 0; + if (bp.skip > 0) { + bp.skipremain = bp.skip; + } else { + bp.skipremain = 0; + } + return i; } } return -1; } -// ブランチ履歴表示 +// すべての命令ブレークのマスクのうち最長のものを再計算する。 +// 命令ブレークポイントの追加/削除のたびに呼び出すこと。 +void +Debugger::RecalcInstMask() +{ + uint32 mask; + bi_need_bytes = 0; + + // 登録されている命令ブレークの最長マスクを求める + mask = 0; + for (const auto& bp : bpoint) { + if (bp.type == BreakpointType::Instruction) { + mask |= bp.mask; + } + } + + // mask の Number of Trailing Zero を求める。 + // (x & -x) で x の最も下の立ってるビットだけを立てる、 + // (x & -x) -1 でそれより下の全ビットを立てる、 + // それを popcount で数えるので、$fffffff0 なら ntz = 4 になる。 + int ntz = __builtin_popcount((mask & -(int32)mask) - 1); + // 上位側から数えたマスクに必要なビット数 + int mlen = 32 - ntz; + // 命令語単位に切り上げる + mlen = roundup(mlen, md->inst_bits); + // バイト数に変換 + mlen /= 8; + + if (mlen > bi_need_bytes) { + bi_need_bytes = mlen; + } +} + +// ブランチ履歴、例外履歴表示 +// brhist [] +// exhist [] +// は表示する最大エントリ数。 +// コンソールではデフォルトで下を新しいの順とする。 を負数にすると +// (行数は絶対値して) 並び順を逆にしてモニタウィンドウと同じ上を新しいの順に +// する。 void Debugger::cmd_brhist() { - int n = 20; + cmd_hist_common(md->GetBrHist(), 0); +} +void +Debugger::cmd_exhist() +{ + cmd_hist_common(md->GetExHist(), BranchHistory::ExHist); +} +// ブランチ履歴、例外履歴表示の共通部分。 +void +Debugger::cmd_hist_common(BranchHistory& hist, uint64 flag) +{ + // 表示最大行数(と向き) + // 向きは bottom_to_top = true が新しいほうを下とする方向。 + int maxlines = 20; + bool bottom_to_top = true; if (args.size() > 1) { - n = atoi(args[1].c_str()); - if (n <= 0) n = 1; - if (n > 255) n = 256; - } - // コンソールでは古い順に表示。最下行が最新。 - auto& bh = (BranchHistory&)md->GetBrHist(); - uint8 t = bh.top; - - t = t - n; - for (int i = 0; i < n; i++) { - auto& e = bh.entry[++t]; - if (e.count == 0) continue; - cons->Print("%03d:%08x->%08x", n - i - 1, e.from, e.to); - if (e.count > 1) { - cons->Print(" x %u\n", e.count); - } else { - cons->Print("\n"); + maxlines = atoi(args[1].c_str()); + if (maxlines < 0) { + bottom_to_top = false; + maxlines = -maxlines; } + + if (maxlines < 1) + maxlines = 1; + if (maxlines > 256) + maxlines = 256; + } + + // コンソールでは空エントリの行は表示したくないので、 + // 先にエントリ数を調べる。 + int used = hist.GetUsed(); + + // 表示行数 + 1行はヘッダ分 + int lines = std::min(used, maxlines) + 1; + + // MonitorUpdate() は TextScreen 高さに合わせて出力してくれる。 + auto size = hist.GetMonitorSize(); + TextScreen tscr; + tscr.Init(size.width, lines); + + // コンソールでは下が新しいの順のほうがいい + if (bottom_to_top) { + flag |= BranchHistory::BottomToTop; } + tscr.userdata = flag; + + // 表示 + hist.MonitorUpdate(tscr); + ShowTextScreen(tscr); } // 実行再開(continue): c [] @@ -1016,14 +1472,16 @@ Debugger::cmd_show() // モニターを更新して表示。 void -Debugger::ShowMonitor(Object& obj) +Debugger::ShowMonitor(IMonitor& monitor) { // モニタを更新 - if (obj.MonitorUpdate() == false) { - cons->Print("show: no monitor\n"); - return; - } - ShowTextScreen(obj.monitor); + TextScreen ts; + + auto size = monitor.GetMonitorSize(); + ts.Init(size.width, size.height); + + monitor.MonitorUpdate(ts); + ShowTextScreen(ts); } // テキストスクリーンを表示。 @@ -1098,6 +1556,7 @@ Debugger::ShowTextScreen(TextScreen& mon } // ステップ実行: s[?:1] +// 途中レジスタを表示せずに 命令実行する void Debugger::cmd_s() { @@ -1125,7 +1584,7 @@ Debugger::cmd_so() } // トレース実行: t[?:1] -// レジスタを表示しながら実行する +// レジスタを表示しながら 命令実行する void Debugger::cmd_t() { @@ -1143,15 +1602,37 @@ Debugger::cmd_t() t_enable = true; } +// 引数で示されるプレフィックスなしの16進数値を返す。 +// 正しく変換できれば値を valp に格納して true を返す。 +// そうでなければ false を返す。 +bool +Debugger::ParseVerbHex(const char *arg, uint32 *valp) +{ + uint32 val; + char *end; + + errno = 0; + val = strtoul(arg, &end, 16); + if (arg[0] == '\0' || end[0] != '\0') { + return false; + } + if (errno == ERANGE) { + return false; + } + + *valp = val; + return true; +} + // 引数で示されるアドレスを返す。 // '%' で始まればレジスタ。 // そうでなければ16進数値。 // アドレスが正しく取得できればアドレスを addr に格納し真を返す。 // そうでなければエラーメッセージを表示して偽を返す。 bool -Debugger::ParseAddr(const char *arg, uint32_t *addrp) +Debugger::ParseAddr(const char *arg, uint32 *addrp) { - uint32_t addr; + uint32 addr; char *end; if (arg[0] == '%') { @@ -1221,3 +1702,19 @@ Debugger::FormatDumpAddr(saddr_t laddr, return rv; } + +// +// ブレークポイントモニター +// + +// コンストラクタ +BreakpointMonitor::BreakpointMonitor() +{ + monitor_size = nnSize(55, 9); +} + +void +BreakpointMonitor::MonitorUpdate(TextScreen& monitor) +{ + gDebugger->MonitorBreakpoint(monitor); +}