-
-
- 0.5.0 (2023-01-25)
+
- 1.4.0 (2025/03/30) +
-
+
- vm(New): HD647180 ASCI (非同期シリアル) を実装。
+
Implement HD647180 ASCI (Asynchronous Serial Communication Interface).
+ - vm(Fix): X68030 キーボード LED の変更がソフトウェアキーボードに
+反映されないことがあったのを修正。
+
Fix an issue that keyboard LED changes may not be reflected in the + software keyboard window on X68030.
+ - host(New): ネットワークとシリアルのホストドライバの実行時切り替えを実装。
+
Implement run-time switching of the network and serial host driver.
+ - app(Update): hostcom-driver=cons を
+hostcom-driver=console に変更。(cons も引き続き使用可能)
+
Change hostcom-driver=cons to hostcom-driver=console + (cons is still available).
+ - GUI(Fix): マウスモードを抜けてもタイトルが戻らない場合があったのを修正。
+
Fix an issue that the title might not change after leaving mouse mode.
+ - GUI(Fix): ステータスパネルの幅によっては不正終了していたのを修正。
+
Fix abnormal terminations caused by status panel width.
+ - GUI(Fix): ログモニタ表示中にフォントサイズ変更すると不正終了する場合が
+あったのを修正。
+
Fix an issue that changing the font size while the log monitor is + displayed might cause an abnormal termination.
+ - GUI(Fix): ログモニタ、LCD モニタがフォントサイズ変更でレイアウトが
+崩れる場合があったのを修正。
+
Fix an issue that changing the font size might break layout + on the log monitor and LCD monitor.
+ - GUI(Fix): ウィンドウの描画で不正終了する可能性があったのを修正。
+
Fix several issues that drawing window might cause abnormal termination.
+ - GUI(Fix): メモリモニタのボタンサイズを調整。
+
Adjust button size on the memory monitor.
+ - GUI(Update): メイン画面縮小時のレイアウトを調整。
+
Adjust main window layout when the window is shrunk.
+ - GUI(Update): メモリモニタ、ビットマップモニタの初期サイズを調整。
+
Adjust initial size of memory monitorand bitmap monitor.
+ - GUI(Update): メモリモニタ、ログモニタ、履歴モニタ、ベクタモニタの
+ウィンドウの伸縮を1行単位に変更。
+
Adjust window stretch of memory monitor, log monitor, history monitor +and vector monitor.
+
+ +
- vm(New): HD647180 ASCI (非同期シリアル) を実装。
+
- 1.3.0 (2025/02/26) +
-
+
- vm(New): VirtIO SCSI を実装。
+
Implement VirtIO SCSI.
+ - vm(New): X68030 MFP のタイマー割り込みを実時間同期モードに対応。
+
X68030 MFP timer interrupts now support real-time synchronization.
+ - vm(New): NWS-1750 のシステムタイマー割り込みを実時間同期モードに対応。
+
NWS-1750 system timer interrupt now supports real-time synchronization.
+ - vm(Update): X68030 MFP のフリーランタイマーはイベントを使わないように変更。
+
X68030 MFP free-run timer now doesn't use scheduler events.
+ - vm(Fix): (virt-m68k で) メモリ 2GB 以上の指定がエラーになっていたのを修正。
+
Fix an issue that specifying 2GB or more of memory would cause an error + (on virt-m68k).
+ - vm(Fix): X68030 の JP キーボードモードで SHIFT
+キー押下で高速モードが解除されなかった問題を修正。
+
Fix an issue that full speed mode could not be relased by pressing + SHIFT key in X68030 JP keyboard mode.
+ - vm(Fix): SCSI デバイスが RST をアサートしたらバスフリーフェーズに移行するよう修正。
+
Fix to transition to bus free phase when a SCSI device asserts RST.
+ - vm(Fix): SCSI デバイスモニタで 10GB 以上の容量が正しく表示できていなかったのを修正。
+
Fix an issue that the disk size over 10GB was not displayed correctly + on SCSI device monitor.
+ - m68k(Update): 68040 のテーブルサーチ処理をいろいろ改善。
+
Make various improvements to 68040 table search processing.
+ - m68k(Update): 68040 の命令サイクル数をなんとなく近づける。
+
Improve almost 68040 instruction cycles somewhat closer.
+ - m68k(Fix): 68030 の命令サイクル数をいろいろ修正、あるいは実装。
+
Improve or implement some 68030 instruction cycles.
+ - m68k(Fix): MPU が 68040 だと例外履歴で IOCS コールを認識できていなかったのを修正。
+
Fix an issue that the exception history could not detect the IOCS call on 68040.
+ - m68k(Update): 例外履歴を Human68k の DOS コールに対応。
+
The exception history now supports Human68k DOS calls.
+ - m88k(Fix): ver 0.7.2 以降、メインメモリ以外へのアクセスが失敗するケースがあったのを修正。
+
Fix an issue that access to devices other than main memory may fail + since ver 0.7.2.
+ - host(Fix): ユーザモードネットワークで
+ルータのリンクローカルアドレスへの ICMPv6 Echo Request
+パケットをドロップしていたのを修正。
+
Fix an issue dropping ICMPv6 Echo Request packet to router's link local + address on the usermode network.
+ - app(New): (X68030 に) --fd0, --fd1 オプションを実装。
+
Support --fd0, --fd1 options for X68030.
+ - GUI(Fix): NWS-1750、virt-m68k のメニューからソフトウェアキーボードウィンドウを削除。
+
Remove incorrect software keyboard window from the menu + on NWS-1750 and virt-m68k.
+ - vm(Update): virt-m68k のパフォーマンス測定ギミックを
+VirtIONet から GFTTY に変更。
+
Change performance measurement gimic on virt-m68k from VirtIONet to GFTTY.
+
- vm(New): VirtIO SCSI を実装。
+
- 1.2.0 (2025/01/26) +
-
+
- host(New): ホストネットワークドライバに usermode (SLIRP) をサポート。
+
Add a usermode (SLIRP) to host network driver.
+ - host(Update): hostnet-driver の値 auto の動作を変更。
+
Change the behavior when hostnet-driver value is auto.
+ - vm(Update): 高速モード動作中に CPU が STOP 状態になっても
+X68030 の DMAC が動作中は高速モードを維持する。
+
Even if the CPU goes into STOP state during full speed mode, + keep it if DMAC is active on X68030.
+ - vm(Fix): X68030 の FDC がドライブセレクト信号の変化でポーリングを再開するよう修正。
+
Fix problem that polling didn't resume when the drive select signal + changed.
+ - vm(Fix): virtio_net がマルチキャストパケットを受信していなかったのを修正。
+
Fix virtio_net not receiving multicast packets.
+ - vm(Fix): Lance(AM7990) のマルチキャスト受信ハッシュを修正。
+
Fix multicast hash on Lance(AM7990).
+ - vm(Fix): RTL8019AS のマルチキャストハッシュを含む受信制御を修正。
+
Fix RTL8019AS whole receiving algorithm including multicast hash. +
- vm(New): RTL8019AS の RSR.PHY ビットを実装。 +
Implement RSR.PHY bit on RTL8019AS.
+ - vm(New): RTL8019AS の RSR.PHY ビットを実装。 +
- host(New): ホストネットワークドライバに usermode (SLIRP) をサポート。
+
- 1.1.2 (2025/01/12) +
-
+
- m68k(Fix): FMOVEM.X -(An),<fplist>、
+FMOVEM.X <fplist>,(An)+ は挙動が観測できなくなったので不当命令に戻しました。
+
Revert FMOVEM.X -(An),<fplist> and + FMOVEM.X <fplist>,(An)+ to the illegal instruction + because the behavior can no longer be observed.
+ - m68k(Fix): FMOVE.X FPn,<ea> 付近の不当命令でフラグが変化していたのを修正。
+
Fix that illegal instructions around FMOVE.X FPn,<ea> might + change FPSR.
+ - m68k(Fix): ver 0.7.2 以降、68030 ATC で Modified ビットの処理が動作していなかったのを修正。
+
Fix problem that 68030 ATC incorrectly operated Modified bit since ver 0.7.2.
+ - m68k(Fix): ver 1.1.0 以降、CMP.[WL] An,Dn が逆アセンブルできなくなっていたのを修正。
+
Fix disassemble of CMP.[WL] An,Dn since ver 1.1.0.
+ - vm/human68k(Update): タイマー用のワークエリアを実装。
+
Implement timer work area.
+ - util/runx(Fix): バグ修正。
+
Fix several problems.
+ - m68k(Experimental): 68LC040 に対応。 +
+ +
- m68k(Fix): FMOVEM.X -(An),<fplist>、
+FMOVEM.X <fplist>,(An)+ は挙動が観測できなくなったので不当命令に戻しました。
+
- 1.1.1 (2024/12/31) +
-
+
- m68k(Fix): FABS、FNEG、FMOVE.D <ea>,FPn、FMOVE.X <ea>,FPn、
+FMOVE.X FPn,<ea> 命令のフラグ変化を修正。
+
Fix flags on FABS, FNEG, FMOVE.D <ea>,FPn, FMOVE.X <ea>,FPn + and FMOVE.X FPn,<ea>.
+ m68k(Update): 不当命令のはずの FMOVEM.X -(An),<fplist> の挙動を実装。 ++Implement behaviors of FMOVEM.X -(An),<fplist> + that should be an illegal instruction.
m68k(Update): 不当命令のはずの FMOVEM.X <fplist>,(An)+ の挙動を一部実装。 ++Implement a part of behaviros of FMOVEM.X <fplist>,(An)+ + that should be an illegal instruction.
- vm(Fix): ver 0.7.0 以降、X68030 でフロッピー2枚指定した状態で起動すると
+IPLROM 画面でハングアップしていたバグを修正。
+
Fix hangup problem when you insert two floppies on startup on X68030 + since ver 0.7.0.
+ - vm(Update): Human68k モードで IOCS _B_INTVCS に一部対応。
+
Implement a part of IOCS _B_INTVCS on Human68k mode.
+ - util(Update): runx で IOCS _B_INTVCS に一部対応。
+
Implement a part of IOCS _B_INTVCS on runx.
+
+ +
- m68k(Fix): FABS、FNEG、FMOVE.D <ea>,FPn、FMOVE.X <ea>,FPn、
+FMOVE.X FPn,<ea> 命令のフラグ変化を修正。
+
- 1.1.0 (2024/12/25) +
-
+
- m68k(New): 68040 に対応開始。新設命令の一部と MMU/FPU くらい。
+
Start implementing 68040. Currently, it supports some new instructions, + MMU and FPU.
+ - m68k(New): (68030 の) cpSAVE、cpRESTORE の挙動を実装。
+
Implement cpSAVE, cpRESTORE behavior on 68030.
+ - m68k(Fix): FSAVE 命令のメモリへの書き出し順を修正。
+
Fix the order that FSAVE writes to the memory.
+ - m68k(Fix): FBcc、FDBcc、FScc、FTRAPcc のフラグ動作を修正。
+
Fix flags on FBcc, FDBcc, FScc and FTRAPcc.
+ - m68k(Fix): FDBcc の分岐アドレスの計算を修正。
+
Fix branch address calculation on FDBcc.
+ - m68k(Fix): FMOVE.X FPn,<ea> 命令の OVFL, UNFL フラグ変化を修正。
+
Fix OVFL, UNFL flags on FMOVE.X FPn,<ea>.
+ - m68k(Fix): FMOVE.[BW] FPn,<ea> 命令で FPn が範囲外の場合の結果を改善。
+
Improve result of FMOVE.[BW] FPn,<ea> when FPn is out of range.
+ - m68k(Fix): F ライン中の不当命令パターンで F ライン例外が起きないケースが
+あったのを修正。
+
Fix a problem that there were cases where F-line exception was not occurred + even if the F-line instruction pattern was illegal.
+ - m68k(Fix): FPU リセット時のレジスタの初期化を実装。
+
Implement that initialize FPU registers on the FPU reset.
+ - m68k(Fix): RTE 命令と FRESTORE 命令がフォーマットエラー例外を起こすケースを実装。
+
Implement a format error exception on RTE and FRESTORE.
+ - m68k(Update): レジスタモニタに FPn の10進表記を実装。
+
Implement the decimal representation of the FPn on the register monitor.
+ - m68k(Update): 不当な EA を持つ命令は逆アセンブラで不当命令として表示する。
+
If an instruction has an illegal EA, the debugger now shows it as + an illegal instruction.
+ - m68k(Update): デバッガで FBcc、FDBcc、FScc、FTRAPcc の分岐情報表示に対応。
+
The debugger now shows branch condition even on FBcc, FDBcc, FScc + and FTRAPcc.
+ - hd64180(Fix): CPIR, CPDR, INIR, INDR, OTIR, OTDR 命令の動作を修正。
+
Fix CPIR, CPDR, INIR, INDR, OTIR, OTDR instructions.
+ - hd64180(Fix): 未定義命令トラップでスタックに積む内容が
+正しくないケースがあったのを修正。
+
Fix contents that is pushed into the stack when the undefined opcode trap.
+ - hd64180(Update): Z80 の未定義命令 SLL、LD IXr,n の逆アセンブルに対応。
+
Supports disassemble of Z80's undefined opcode as SLL or LD IXr,n.
+ - hd64180(New): 設定項目 xp-clock を追加。
+
Add xp-clock configuration.
+ - vm(New): virt-m68k (と NEWS) のシリアルコンソールの端末エミュレーションを実装。
+
Implement a terminal emulation of serial console on virt-m68k (and NEWS).
+ - vm(New): virt-m68k の BootInfo BI_COMMANDLINE を実装。
+NetBSD/virt68k にルートデバイスを指定できるようになります。
+
Implement BI_COMMANDLINE on BootInfo. + Now you can specify the root device to NetBSD/virt68k.
+ - vm(Fix): SPC リセット時にキューをクリアする。
+IPLROM 1.6 でリセット時に SASI 機と誤認されるケースがあったのが直ります。
+
Clear the SPC's internal queue on the reset.
+ - vm(Fix): virtio-net のリセット処理を実装。
+
Implement a reset on virtio-net.
+ - vm(Fix): Goldfish Timer のリセット以降タイマーが動作しない場合があったのを修正。
+
Fix a problem that Goldfish Timer might not work after the reset.
+ - vm(Fix): Goldfish PIC もリセット時にカウンタをクリアする。
+
Clear the Goldfish PIC's monitor counter on the reset.
+ - GUI(Fix): SPC モニタの X68030 のアドレスを修正。
+
Fix SPC address label on X68030 SPC monitor.
+ - GUI(Fix): ベクタテーブルモニタを virt-m68k に対応。
+
Support virt-m68k on the vector table monitor.
+ - GUI(Fix): 文字入力モードでカーソルキーが入力できないケースがあったのを修正。
+
Fix a proiblem where cursor key input was sometimes not possible.
+
+ +
- m68k(New): 68040 に対応開始。新設命令の一部と MMU/FPU くらい。
+
- 1.0.0 (2024/10/31) +
-
+
- m68k(New): データキャッシュを実装。
+
Implement data cache.
+ - vm(Update): バス構造を全面書き直し。
+
Rewrite whole bus structure.
+ - m68k(Update): FTRAPcc 命令を実装。
+
Implement FTRAPcc instructions.
+ - m68k(Fix): MOVE.W ea,CCR 命令が特権命令になっていなかったのを修正。
+
Fix problem that MOVE.W ea,CCR instruction was not privileged.
+ - m68k(Fix): キャッシュエントリクリア動作を修正。
+
Fix cache entry clear operation.
+ - m68k(Fix): 同じレジスタの (An)+ か -(An) が2回現れる命令で
+バスエラーが起きた場合に RTE で回復できない可能性があるのを修正。
+
Fix problem that RTE instruction may not be able to recover from a bus error + if it occurred on an instruction which + accesses the same register's (An)+ or -(An) twice.
+ - m68k(Fix): リセット例外以外の例外ベクタをデータ空間から取得するよう修正。
+
Fix problem that some exception vector was fetched from wrong + address space.
+ - m68k(Fix): FPU なしの時にもモニタに FPU レジスタが表示されていたのを修正。
+
Fix problem that 68030 register monitor displays FPU registers + even though no FPU.
+ - vm(Update): LUNA-88K で Lance の未定義ポートへのアクセスを修正。
+
Fix accessing to Lance's undefined port on LUNA-88K.
+ - vm(Update): X68030 CRTC の未定義ポートへのアクセスを修正。
+
Fix accessing to CRTC's undefined port on X68030.
+ - vm(Update): Human68k モードに DOS コールをいくつか追加。
+fputest.x (0.17.* 以降) が動作するようになりました。
+
Implement several DOS calls on Human68k mode. + Now you can run fputest.x (0.17.* and later) on it.
+ - vm(Fix): VirtIO Network のデバイスリセットを修正。
+
Fix a device reset on VirtIO Network device.
+ - vm(Fix): X68030 DMAC の一部のレジスタのワードアクセスを修正。
+
Fix a word access to some DMAC registers on X68030.
+ - vm(Fix): 設定項目 mpu-clock
+ の小数点以下3桁目が正しく指定できない場合がある問題を修正。
+
Fix problem that the third decimal place of configuration item + mpu-clock may not be able to specified correctly.
+ - vm(Fix): X68030 の CTRL+OPT.1+DEL 入力で不正終了する可能性があるのを修正。
+
Fix possibility of an abnormal termination on CTRL+OPT.1+DEL input + on X68030.
+ - vm(Fix): X68030 フロッピーのモーター回転中の再アクセスが出来ない問題を修正。
+
Fix problem that you could not access the floppy again while + the motor is on on X68030.
+ - app(Update): -H オプション指定時は -c を省略可能にする。
+
Make -c optional when -H is specified.
+ - GUI(Fix): パフォーマンスカウンタを 100倍速以上の表示に対応。
+
Support display of 100x speed or more on performance counter.
+ - util(New): runx を実装。
+instructiontest.x と fputest.x (0.16.* 以前および 0.17.* 以降) が実行できます。
+
Implement runx. + It can run instructiontest.x and fputest.x (before 0.16.* and after 0.17.*).
+
+ +
- m68k(New): データキャッシュを実装。
+
- 0.7.3 (2024/07/03) +
-
+
- vm(Fix): LUNA-88K のリセットでスケジューラが停止する場合がある問題を修正。
+
Fix problem that resetting on LUNA-88K sometimes stops the scheduler.
+ - vm(Fix): MSX-DOS モードが ver 0.7.0 以降即終了していた問題を修正。
+
Fix problem that MSX-DOS mode immediately exits since er 0.7.0.
+ - vm(Fix): LUNA-I の実機 PROM から SPC へのアクセスが ver 0.7.0
+以降正しく行えていなかったのを修正。
+
Fix problem that the real PROM image could not access SPC correctly on + LUNA-I since ver 0.7.0.
+ - vm(Fix): 起動時に windrv-path で指定したディレクトリがない場合はエラーにする。
+
Make an error if the directory specified by windrv-path does not exist + on startup.
+ - vm(Fix): レンダラが過剰に動作していたのを修正。
+
Fix problem that the renderer runs excessively.
+ - vm(New): X68030 のコントラスト処理を aarch64 の NEON に対応。
+
X68030 Contrast rendering now can use NEON on aarch64.
+ - vm(New): SSG (YM2149) をレジスタアクセスだけ実装 (まだ何も動きません)。
+
Implement SSG (YM2149) registers only (It doesn't work yet).
+ - vm(Update): メイン画面の拡大縮小をレンダラスレッドで行うように変更。
+
Mainview scaling is now done by the renderer thread.
+ - vm(Update): SPC モニタにレジスタのアドレスを表示。
+
Display register addresses on the SPC monitor.
+ - vm(Update): SCSI の内部構造を変更。外部動作は変更ないはず。
+
Change several SCSI internal structures. + No functional changes intended.
+ - vm(Update): その他動作に影響ないはずの変更や修正をいろいろ。
+
Various internal improvements. No functional changes intended.
+ - m68k(Update): ATC のライン数を 22 本に戻す。パフォーマンスは約2%改善。
+
Put back the number of ATC lines to 22. It improves the performance + about 2%.
+ - GUI(New): アクセス状況モニタをグラフィカルに。
+
Make the access status monitor graphical.
+ - GUI(Update): ビットマップ全般の内部構造を変更。外部動作は変更ないはず。
+
Change whole bitmap internal structures. No functional changes intended.
+ - GUI(Update): プリセット倍率での拡大縮小処理を 3-5 倍高速化。
+
Improve scaling performance at preset magnification by 3-5 times.
+ - vm(New): CPU アフィニティの設定を可能にする(デバッグ評価用)
+
Allow CPU affinity configuration for debugging and evaluation.
+
+ +
- vm(Fix): LUNA-88K のリセットでスケジューラが停止する場合がある問題を修正。
+
- 0.7.2 (2024/05/11) +
-
+
- m68k(Update): ATC および TT サーチのパフォーマンスを約10%改善。
+
Improve ATC and TT search performance about 10%.
+ - vm(Update): LUNA、virt-m68k でバースト転送をサポートし、
+パフォーマンスを m68k で約6-10%程度、m88k で約3%改善。
+(X68030 は本体回路がバースト転送をサポートしていません)
+
Implement a burst transfer on LUNA and virt-m68k. + It improves the performance of m68k by about 6-10% and m88k by about 3%. + (X68030 hardware doesn't support the burst transfer)
+ - vm(Update): virt-m68k 全体と virtio-block のパフォーマンスもわずかに改善。
+
Improve performance of whole virt-m68k and virtio-block slightly.
+ - vm(Update): スケジューラモニタと 88100 レジスタモニタを調整。
+
Minor adjustment for scheduler monitor and 88100 register monitor.
+ - vm(Update): X68030 のアクセス状況モニタを他機種と統一するため
+ 2MB/char に変更。
+
Change unit to 2MB/char on X68030 access stat monitor + to be consistent with other VMs.
+ - vm(New): virt-m68k のパフォーマンス測定ギミックを実装。
+
Implement performance measurement gimic on virt-m68k.
+ - m68k(Fix): ver 0.6.3 以降「VM 再実行」で終了するケースがあったのを修正。
+
Fix problem that "Restart VM" sometimes causes app termination + since ver 0.6.3.
+
+ +
- m68k(Update): ATC および TT サーチのパフォーマンスを約10%改善。
+
- 0.7.1 (2024/03/28) +
-
+
- m88k(Update): m88100、m88200 に適切なマスクバージョンを設定。
+OpenBSD/luna88k が1〜2割高速になります。
+
Set good m88100, m88200 mask version. + It makes OpenBSD/luna88k faster 10~20%.
+ - vm(Update): virt68k の機種名を virt-m68k に変更
+ (従来の vmtype=virt68k も使えます)。
+
Change canonical machine name from virt68k to virt-m68k. + (vmtype=virt68k can also be used.)
+ - vm(Update): VirtIO の間接ディスクリプタを実装。
+
Support VirtIO's indirect descriptor.
+ - vm(Update): VirtIO Network のキューサイズを調整。
+
Adjust VirtIO Network's queue size.
+ - vm(New): VirtIO Entropy デバイスを実装。
+
Implement VirtIO Entropy device.
+ - vm(Fix): Goldfish Timer で過去の時刻が指定された場合に即割り込みを
+上げるよう修正。
+
Fix Goldfish timer to raise an interrupt immediately + if the specified time is in the past.
+ - vm(Fix): X68030 CRTC アクセスが ver 0.7.0 以降壊れていたのを修正。
+
Fix CRTC accesses on X68030 broken since ver 0.7.0.
+
+ +
- m88k(Update): m88100、m88200 に適切なマスクバージョンを設定。
+OpenBSD/luna88k が1〜2割高速になります。
+
- 0.7.0 (2024/02/21) +
-
+
- vm(New): virt68k をサポート開始。
+
Start to support virt68k.
+ - vm(Fix): Nereid イーサネットボード2枚モードで
+割り込みアクノリッジが正しく処理されないのを修正。
+
Fix problem that the interrupt acknowledge didn't handle correctly + when two Nereid boards are installed simultaneously.
+ - vm(Fix): リセット時にいくつかのデバイスでスプリアス割り込みが起きる場合があったのを修正。
+
Fix several spurious interrupts on resetting on various devices.
+ - vm(Fix): X68030 SCC の MIE を実装。
+
Implement MIE on X68030 SCC.
+ - vm(Fix): X68030 MFP でタイマー開始時に TxDR を更新しないよう修正。
+
Fix not to update TxDR on starting the timer on X68030 MFP.
+ - vm(Fix): X68030 CRTC のアクセスを色々改善。
+
Fix several accesses to CRTC on X68030.
+ - vm(Update): バスアクセス全体を色々整理中。
+ デバイスのウェイトが意図的に、あるいは意図せず変わっているかも知れません。
+
Fix and rearrange whole bus access. + Some device wait may be changed intentionally or unintentionally.
+ - vm(Update): 全機種の電源デバイスを整理。
+
Rearrange the power devices on all architecture.
+ - app(New): 画面レンダリングを amd64 の AVX2 に対応。
+
Graphic rendering now can use AVX2 on amd64.
+ - app(Update): -X は -H なしだと引数1つだけを受け取るように変更。
+
-X option is changed to accept only one argument if -H is not specified.
+ - app(Update): 設定項目に exec-file, exec-arg を追加。
+
Configuration item exec-file and exec-arg are added.
+ - app(Update): オプション --initrd と設定項目 exec-initrd を追加。
+
--initrd option and configuration item exec-initrd are added.
+ - app(Update): 設定ファイル中のパスの '~' をホームディレクトリに置換する。
+
Path beginning of '~' in the configuration file is replaced to the + home directory.
+ - app(Fix): -X が指定されても -Lhelp が表示できるよう修正。
+
-Lhelp can be displayed even if -X is specified.
+ - debugger(Update): dt、mt コマンドを廃止。 +
+ +
- vm(New): virt68k をサポート開始。
+
- 0.6.4 (2023/12/28) +
-
+
- vm(New): X68030 に Windrv 互換デバイスを実装。
+Human68k からホストのディレクトリが見えるようになります。
+
Implement a Windrv compatible device on X68030. + You can access a host directory via the device on Human68k.
+ - vm(New): X68030 のコントラスト設定を実装。
+
Implement a contrast feature on X68030.
+ - vm(Update): X68030 で SPC のキューが一杯で書き込みが待たされるのを実装。
+Human68k から SCSI メディアに書き込みが出来るようになります。
+
Implement that writing to the SPC is made to wait if the internal + queue is full. You can write a SCSI media on Human68k.
+ - vm(Update): X68030 DMAC からのアクセスに FC (ファンクションコード) を反映。
+
DMAC now uses FC (Function Code) to access on X68030.
+ - vm(Update): JP キーボードモードでホストの [PageUp]、[PageDown]、[End]
+ キーを X68030 の [ROLL UP]、[ROLL DOWN]、[UNDO] キーに対応。
+
Connect the host's [PageUp], [PageDown] and [End] key to guest's + [ROLL UP], [ROLL DOWN] and [UNDO] key respectively on X68030. +
- vm(Fix): X68030 で SCC、FDC、SPC、Nereid +が正しくリセットされていなかったのを修正。 +
Fix the problem that SCC, FDC, SPC and Nereid are not reset + correctly on X68030.
+- vm(Fix): X68030 の CIIN 信号線の条件が誤っていたので修正。 +
Fix a CIIN condition on X68030.
+- vm(Fix): X68030 の $ED0000..$EDFFFF がユーザアクセス可能だったのを修正。 +
Fix $ED0000..$EDFFFF was user-accessible on X68030.
+- vm(Fix): X68030 マウスのデータ送出タイミングを調整。影響はないはず。 +
Fix timing that mouse sends its data on X68030. + It should not affect anything.
+- m68k(Update): m68k コアのパフォーマンスを改善しました。 +
Improve m68k core performance.
+- GUI(New): メニューを再編して、 +「デバイス > 操作」の一部と旧「ファイル」を「VM」に統合。 +
Rearrange menus. A part of "Device > Operation" and old "File" + menus are integrated into"VM".
+- GUI(New): X68030 のメニューに「CTRL+OPT.1+DEL を送信」を追加。 +
Add "Send CTRL+OPT.1+DEL" menu on X68030.
+- GUI(Fix): 0.6.3 以降、 +ログレベル設定ウィンドウを開くと不正終了していたのを修正。 +
Fix an abnormal termination when open the loglevel setting window + since 0.6.3.
+- debugger(Fix): コマンドラインオプション -b の引数が16進数として処理できない場合に不正終了していたのを修正。 +
Fix an abnormal termination when the argument of command line option + -b cannot be parsed as a hexadecimal number.
+- debugger(New): --bi-exg オプションを実装。 +
- vm(Fix): X68030 で SCC、FDC、SPC、Nereid +が正しくリセットされていなかったのを修正。 +
+ +
- vm(New): X68030 に Windrv 互換デバイスを実装。
+Human68k からホストのディレクトリが見えるようになります。
+
- 0.6.3 (2023/11/30) +
-
+
- m68k(New): 命令キャッシュを実装。
+ X68030 IPL の MPU クロック表示が正しく表示されるようになります。
+
Implement an instruction cache. + Finally X68030 IPL can display correct MPU clock speed.
+ - vm(New): X68030 のエリアセット、拡張エリアセットをたぶん実装。
+
Implement areaset and extended areaset features on X68030.
+ - vm(New): X68030 の FC2 ピンを切断するオプションを実装。
+
Implement an option whether to cut FC2 or not on X68030.
+ - vm(New): X68030 システムポートモニタを実装。
+
Implement a system port monitor on X68030.
+ - vm(New): アクセス状況モニタを実装。
+
Implement an access status monitor.
+ - vm(Update): LUNA-I で実機 PROM イメージを使う場合のメモリ上限を
+255MB に制限する。
+
Restrict memory size to 255MB when using PROM image on LUNA-I.
+ - vm(Update): LUNA-I, LUNA-88K のメモリ上限、
+X68030 の拡張メモリの上限を 512MB に変更。
+
Change memory size limit to 512MB on LUNA-I, LUNA-88K and X68030.
+ - m68k(Fix): バスエラーハンドラ起動中のアドレスエラーが二重バスフォールトに
+ならなかったのを修正。
+
Fix the problem that an address error while executing bus error handler +does not cause double bus fault.
+ - vm(Fix): LUNA-88K の XP プロセッサの割り込みレベルを修正。Issue#131
+
Correct interrupt levels from XP Processor on LUNA-88K.
+ - GUI(Fix): ビットマッププレーンモニタが 256色モードに対応していなかった
+のを修正。Issue#133
+
Fix the problem that the bitmap plane monitor did not support +256-color mode.
+ - build(Fix): util/mkcgrom を OpenBSD でのビルドに対応。
+
Make util/mkcgrom buildable on OpenBSD.
+
+ +
- m68k(New): 命令キャッシュを実装。
+ X68030 IPL の MPU クロック表示が正しく表示されるようになります。
+
- 0.6.2 (2023/08/16) +
-
+
- m88k(Fix): m88200 のアドレス変換がオフの場合でも暗黙 BATC を有効にする。
+
Implement that hardwired BATCs are enable even if the address + translation is disabled on m88200.
+ - m88k(Update): m88200 の BATC/PATC サーチのパフォーマンスを改善。
+
Improve m88200 BATC/PATC search performance.
+ - vm(Fix): リセット時に PEDEC の割り込みをクリアする。
+
Negate PEDEC interrupts when resetting.
+ - vm(Update): Nereid、Lance のマルチキャストフィルタを実装。
+
Implement multicast filter on Nereid and Lance.
+ - vm(Update): LUNA-I, LUNA-88K 内蔵 PROM のホストファイルの処理を再編。
+ --load-only オプションを廃止。
+
Reorganize host file handling on LUNA-I/LUNA-88K internal PROM. + It obsoletes --load-only option.
+ - build(Update): wxWidgets を 3.2 → 3.0 の順で探すように変更。
+
Search wxWidgets 3.2, 3.0 in order.
+
+ +
- m88k(Fix): m88200 のアドレス変換がオフの場合でも暗黙 BATC を有効にする。
+
- 0.6.1 (2023/04/23) +
-
+
- vm(Update): NWS-1750 の $e000'0000〜$efff'ffff
+のうちデバイスのない領域をバスエラーにしないよう変更。
+またそれに伴い、設定の xxx-news-sic-ignore を廃止。
+
Change that access to the range from $e000'0000 to $efff'ffff + doesn't cause a bus error on NWS-1750. + Along with this, xxx-news-sic-ignore is obsoleted.
+ - vm(Update): NWS-1750 の PROM エミュレーションに
+TRAP#15 のダミーハンドラを実装。
+
Implement dummy TRAP#15 handler on NWS-1750's PROM emulation.
+ - GUI(New): NEWS のデバイスマップモニタを実装。
+
Implement NEWS' device map monitor.
+ - GUI(Fix): ver 0.6.0 で一部のモニタがメニューからなくなっていたのを修正。
+
Fix problem that some monitors are not shown in menu since ver 0.6.0.
+
+ +
- vm(Update): NWS-1750 の $e000'0000〜$efff'ffff
+のうちデバイスのない領域をバスエラーにしないよう変更。
+またそれに伴い、設定の xxx-news-sic-ignore を廃止。
+
- 0.6.0 (2023/03/22) +
-
+
- vm(New): Nereid 拡張ボードのバンクメモリとイーサネット(RTL8019AS)を実装。
+
Implement a bank memory and ethernet (RTL8019AS) of Nereid expansion + board.
+ - vm(Fix): X68030 で -X オプションで起動した時の割り込みレベルを修正。
+
Fix an interrupt level when -X option is used in X68030.
+ - debugger(Update): 例外履歴を X68030 の IOCS コールに対応。
+
Support X68030 IOCS call in the exception history.
+
+ +
- vm(New): Nereid 拡張ボードのバンクメモリとイーサネット(RTL8019AS)を実装。
+
- 0.5.1 (2023/02/12) +
-
+
- vm(Fix): X68030 拡張メモリがない領域がバスエラーにならないよう修正。
+
Fix a bus error in areas with no extended memory in X68030.
+ - vm(Update): HD647180 の DAA 命令を実装。
+
Implement DAA instruction on HD647180.
+ - debugger(Fix): HD647180 リセット状態中にセットしたブレークポイントが
+効かなかったのを修正。
+
Fix breakpoints set while HD647180 is in reset state not working.
+ - GUI(New): デバイスマップモニタを実装。
+
Implement a device map monitor.
+ - GUI(Update): DIPSW ウィンドウのスイッチをフォントサイズに連動させる。
+
Link control size with font size, on DIPSW window.
+ - GUI(Fix): ビットマップモニタウィンドウを24ドットフォントに対応。
+
Support 24 dot fonts in a bitmap monitor window.
+ - GUI(Fix): ビットマップモニタウィンドウをリサイズすると不正終了する
+場合があったのを修正。
+
Fix an abnormal termination when a bitmap monitor window is resized.
+
+ + +
- vm(Fix): X68030 拡張メモリがない領域がバスエラーにならないよう修正。
+
- 0.5.0 (2023/01/25)
- vm(New): HD647180 を実装開始。とりあえず動く程度。
Start to implement HD647180.
@@ -42,7 +612,7 @@ Grey colored items are experimental and
-
- vm(New): HD647180 を実装開始。とりあえず動く程度。
- 0.4.4 (2022-10-27)
+
- 0.4.4 (2022/10/27)
- vm(New): LUNA の 8bpp ボードに仮対応。
Support 8bpp board on LUNA provisionally.
@@ -99,7 +669,7 @@ GTK 側のテーマ変更に対応する
-
- vm(New): LUNA の 8bpp ボードに仮対応。
- 0.4.3 (2022-08-27)
+
- 0.4.3 (2022/08/27)
- m68k(Fix): PTESTR/PTESTW 命令のレベル0、レベル7 を実装。
Implement case level 0 and level 7 of PTESTR/PTESTW instructions.
@@ -116,7 +686,7 @@ GTK 側のテーマ変更に対応する
-
- m68k(Fix): PTESTR/PTESTW 命令のレベル0、レベル7 を実装。
- 0.4.2 (2022-08-03)
+
- 0.4.2 (2022/08/03)
- vm(Update): LUNA-88K のメモリマップを実機に近づける。
Improve a memory map on LUNA-88K.
@@ -148,7 +718,7 @@ ROM コードの制約のため。
-
- vm(Update): LUNA-88K のメモリマップを実機に近づける。
- 0.4.1 (2022-07-24)
+
- 0.4.1 (2022/07/24)
- vm(Fix): X68030 システムポートの電源オフ制御ポートに4回以上書き込んだ時に
不正終了していたのを修正。
@@ -185,7 +755,7 @@ ROM コードの制約のため。
-
- 0.4.0 (2022-06-18) +
- 0.4.0 (2022/06/18)
- vm(New): X68030 FDC/FDD と 2HD/2HC フロッピーを実装。
Implement FDC/FDD on X68030 and 2HD/2HC floppies.
@@ -520,7 +1090,7 @@ UniOS-Mach の a.out ファイルをロVarious fixes for network packets received at the host.
- vm(New): LUNA-I/LUNA-88K のシステムクロックに実時間同期モードをサポート
(実験中)。
-
Support real-time synchronization mode on LUNA-I/LUNA-88K's system clock +
Support real-time synchronization on LUNA-I/LUNA-88K's system clock (experimental).
- m88k(New): 疑似 STOP 状態をサポート。
Support pseudo stop status for m88k.
- m88k(New): 疑似 STOP 状態をサポート。
- 0.4.0 (2022-06-18) +
- vm(Fix): X68030 システムポートの電源オフ制御ポートに4回以上書き込んだ時に
不正終了していたのを修正。
@@ -185,7 +755,7 @@ ROM コードの制約のため。