nono is OMRON LUNA-I/LUNA-88K (and SHARP X68030) emulator -runs on NetBSD and etc.+nono は NetBSD とかで動作する OMRON LUNA-I/LUNA-88K のエミュレータです。 +何故か SHARP X68030 と virt68k も動いたりするかも知れません。 +
nono is OMRON LUNA-I/LUNA-88K emulator runs on NetBSD and etc. +It can also emulate SHARP X68030 and virt68k. +
wxWidgets は NetBSD(pkgsrc) なら
-pkgsrc/x11/wxGTK30 (OPTIONS:gtk3 で動作確認) です。
-2022Q3 の wxGTK32 ではビルドできないようです。
+pkgsrc/x11/wxGTK32 (OPTIONS:gtk3 で動作確認) です。
If you use NetBSD(pkgsrc),
-wxWidgets is pkgsrc/x11/wxGTK30 (OPTIONS:gtk3 is tested).
-wxGTK32 in 2022Q3 doesn't seem to build for now.
+wxWidgets is pkgsrc/x11/wxGTK32 (OPTIONS:gtk3 is tested).
(NetBSD 以外でのビルドはサポートしていませんが)
-Ubuntu 20.04 ではたぶん以下のパッケージが必要です。
-You may need the following packages on Ubuntu 20.04
+Ubuntu 22.04 ではたぶん以下のパッケージが必要です。
+
You may need the following packages on Ubuntu 22.04
(though we won't support non-NetBSD platform).
nono のソースアーカイブを展開したら以下のようにビルドします。
-configure には環境変数 CC、CXX でコンパイラを指定することが出来ます。
-また wx-config が標準的な名前で提供されていないために見付けられない場合には
-環境変数 WX_CONFIG にパスを指定することが出来ます。
-Extract the nono's source archive and build as following.
-You can specify C/C++ compiler using environment variable CC and CXX
-if configure cannot find standard name suitable compiler.
-Also, you can specify wx-config path using environment variable WX_CONFIG
-if configure cannot find wx-config.
-
--DNOTEST は開発者用のテストツールをビルドしないためのものです。
-With -DNOTEST, the build excludes test tools which is needed
-for developers only.
+Extract the nono's source archive and build as following.
+
-% ./configure -% make -DNOTEST depend -% make -DNOTEST +% ./configure [<options>] +% make -DRELEASE depend +% make -DRELEASE % su # make install
-2つの実行ファイルがインストールされます。
+configure には環境変数 CC、CXX でコンパイラを指定することが出来ます。
+wx-config が標準的な名前で提供されていないために見付けられない場合には
+環境変数 WX_CONFIG にパスを指定することが出来ます。
+また configure のオプションとして以下が指定できます。
+You can specify C/C++ compiler using environment variable CC and CXX
+if configure cannot find standard name suitable compiler.
+You can specify wx-config path using environment variable WX_CONFIG
+if configure cannot find wx-config.
+Also, you can specify the following option for configure.
+
+
+
Disable AVX2 support on amd64(x86_64). +By the default, it will generate AVX2 supported binary +only if configure detects that compiler supports AVX2.+
+make install により2つの実行ファイルがインストールされます。
nono が GUI 版実行ファイル、
nono-cli がコマンドライン版です。
-Two executables will be installed.
+
make install will install two executables.
nono is the GUI executable and nono-cli is
the command line executable.
-
+
How to execute
nono supports multiple architectures so that it needs configuration. -First, nono reads a configuration file -names ~/.nono.cfg if exists, then -reads a configuration file names nono.cfg in the current directory -if exists -(You can specify the configuration file path (or VM directory) using --c option). See the following Configuration section for details.
nono will create the initial SRAM.DAT for X68030 and exit, -if there is no SRAM.DAT in the VM directory.-
Boot as the fast mode. You can change this mode on GUI menu after boot, and the option only changes its initial state. -This option is equivalent to fast-mode=1 in configuration.
GUI Only. Specifies the initial fontsize of all sub windows. You can change this value on GUI menu after boot. -This option is equivalent to monitor-fontsize in configuration.
+Specifies the initial ramdisk image passed to the kernel. +If file is relative path, +it is path from the current directory. +This option is equivalent to exec-initrd in configuration +except for base directory of the relative path.+
GUI Only. Specifies the initial main window scale in real number. - -This is equivalent to mainview-scale in configuration. +This is equivalent to mainview-scale in configuration. You can change this scale on GUI menu after boot.
Loads and executes host's file. If file is relative path, it is path from the current directory. +This option is equivalent to exec-file in configuration +except for base directory of the relative path. If the file is gzip'd, it is automatically extracted. The supported file format (after extracting) is the following. Actually, it only assumes bootloaders or kernels. @@ -309,18 +315,29 @@ it will also load symbol tables as the bELF object (Experimental) Human68k .x executable (Experimental) -LUNA では、設定の prom-image、luna-dipsw1 の内容(後述)によらず -内蔵の互換 PROM で起動し、直ちにホストファイルを実行します。 +LUNA では設定の prom-image (後述) によらず内蔵の互換 ROM で起動します。 +luna-dipsw1 の DIPSW 設定が +dipsw-autoboot=yes 相当の状態ならそのまま直ちにホストファイルを実行し、 +そうでなければ互換 ROM のプロンプトで停止します。 +後者の場合でも LUNA-I なら "g" コマンド、LUNA-88K なら "b" コマンドによる +ロードはここで指定したホストファイルをロードします。 X68030 では、IPLROM 起動の後の起動デバイスに細工がしてあり、 そこからホストファイルを実行します。 +virt68k (と NEWS) はこの方法でしか起動できませんので、 +実行ファイルの指定は必須になります。 On LUNA, -regardless of prom-image and luna-dipsw1 configuration -(see below), -the internal emulated PROM loads and executes the host file immediately. +regardless of prom-image configuration (see below), +it boots the internal emulated PROM. +If luna-dipsw1 configuration meets dipsw-autoboot=yes, +it will immediately load and execute the host file. +Otherwise, it will wait in prompt. +Even in this case, "g" command (in LUNA-I) or "b" command (in LUNA-88K) +will load the host file that is specified by this option. On X68030, nono hacks the boot device after normal boot from IPLROM, -and loads and executes the host file.
For developers:@@ -340,8 +357,6 @@ and loads and executes the host file.ログレベルを指定します。 カンマで区切って複数指定することも出来ます。 -Lhelp で name の一覧を表示します。 -
Configuration
nono's configurations are always applied in the following order.- -
Default value
Contents of ~/.nono.cfg if exists@@ -368,7 +381,6 @@ nono の設定はいずれも以下の
Contents of nono.cfg in the VM directory (or the file specified by -c option) if exists
Command line option
-
vmtype を除くすべての設定項目はそれぞれデフォルト値を持っています。
つまり少なくとも vmtype だけは設定ファイルかコマンドラインオプションで指定する必要があります。
All configuration items except vmtype have default value.
It means, you must specify at least only vmtype
by configuration file or commandline option.
-
設定項目は次の通りです。
The configuration items are:
@@ -412,8 +421,9 @@ This field is mandatory.
| luna | … LUNA-I | |
| luna88k | … LUNA-88K - | |
| x68030 | … X68030 (Experimental) + | |
| x68030 | … X68030 | |
| news | … NWS-1750 (Just a joke) + | |
| virt68k | … virt68k |
Specifiies the host file that will be loaded at startup. +This is mostly the same as -X option. +The only one difference is that relative path originates the VM directory.+
Specifies the initial ramdisk image passed to the kernel. +This is mostly the same as --initrd option. +The only one difference is that relative path originates the VM directory.+
Specifies the extended RAM size in MB. For now, only the following can be specified.-
No extended memory. It's default.
TS-6BE16 compatible mode. -Its address is $0100'0000〜$01ff'ffff and the size is 16MB.-
060turbo compatible mode. -Its address is $1000'0000〜$17ff'ffff/$1fff'ffff and the size is -128 or 256MB.-
060turbo compatible mode. Its address is from $1000'0000.+
Specifies whether to install FPU or not. If none, FPU is not installed. If 68881, 68881 FPU is installed. @@ -567,7 +591,24 @@ And, none can also be written a 68881 can also be written as 1. The default is 68881. This item cannot be specified on LUNA-I -because (probably) all LUNA-I has 68881.
Specifies whether to use AVX2 acceleration on amd64(x86_64) hosts. +If auto, nono checks whether the host CPU supports AVX2 +on startup and use it if it does. +If no, nono will not execute AVX2 instructions. +The default is auto. +Note that this item is ignored if the host is not amd64(x86_64).+
Specifies the host driver of ethernet device. +hostnet0-driver のデフォルトは auto、 +hostnet1-driver のデフォルトは none です。 +Specifies the host driver of N-th +ethernet device. afpacket, bpf, and tap can be specified only if the host OS supports them. auto and none can always be specified. @@ -628,10 +673,10 @@ and tap uses tap(4) interface. If auto is specified, it tries tap, afpacket, and bpf in that order (if the host OS supports them). -The default is auto.
Specifies the behavior when the driver which is selected by -hostnet-driver is unusable; +hostnetN-driver is unusable; terminate the process if 0, or continue to run using the none driver if 1. The default is 0.
Specifies number of planes on LUNA video board. The valid values are 1, 4 or 8. 1 means a monochrome video board, 4 means 16-color (4bpp) video board, 8 means 256-color (8bpp) video board. -The default value is 4.-
Specifies refresh rate of all text monitor windows in Hz. It ranges from 1 to 60. The default is 20Hz. You can choose this value on GUI menu after boot, -from preset rate or rate specified here.
Specifies the MPU clock in MHz. -The default value is 20MHz on LUNA-I, or 25MHz on LUNA-88K and X68030.
Specifies whether install Nereid expansion board or not. +Up to two board can be operated at the same time. +If 0, the board is not installed. +If 1, the board is installed. +The default value is 0. +See also Section 4.6 Nereid below for details.
This can disable only NIC (RTL8019AS) of Nereid expansion board +(although it's not possible normally in the real world). +It's disabled if 0, or enabled if 1. +The default is 1. Normally, leave it 1. +This item will be ignored if the corresponding nereidN-enable +is 0.
Specifies bank memory size in MB of Nereid expansion board. +The valid values are 0, 4 or 16. +If 0, disable the bank memory. +The default is 16. +This item will be ignored if the corresponding nereidN-enable +is 0.+
On LUNA-I, the default is 16MB. If the size is less than 16MB, you can specify in 4MB unit. -If larger, you can specify up to 255MB in 1MB unit. +If larger, you can specify up to 512MB in 1MB unit. +However, if you have prom-image with the real image, +the maximum is limited to 255MB. By the way, NetBSD/luna68k needs at least 8MB to boot.
On LUNA-88K, the default is 64MB. If the size is less than 64MB, you can specify in 16MB unit. -If larger, you can specify up to tentative 255MB in 1MB unit.+If larger, you can specify up to tentative 512MB in 1MB unit. +However, if you have prom-image with the real image, +the maximum is limited to 240MB.
On X68030, the default is 12MB. You can specify it in 1MB unit from 4MB to 12MB. -See extram-size for extended memory.+See extram-size for extended memory.
On NWS-1750, This is 16MB fixed for now.+
On virt68k, the default is 128MB and +the range is 16MB to 4080MB. +If the specified size is not divisible by 16MB, +it will be rounded up to 16MB.
Specifies virtio block device's image. +N in the key is 0 to 7 for now. +If the path is relative path, it is from the VM directory.+
-Specifies whether to ignore accesses to unimplemented -SCSI controller and DMA controller areas. -As of Aug. 2022, NetBSD/m68k can not handle bus errors to this area, -and it happens uvm_fault panic. -Specifying 1 avoids it and NetBSD/news68k can boot. -The default value is 0. -This option is temporary and will be discontinued in the future.
Specifies whether nono writes a writing to virtio block devices back +to the diskimage. +0 means normal operation (writes to the diskimage). +1 means that nono will not write to the diskimage back. +Data that the guest wrote to the device will be written to a temporary file +in the VM directory, +like Copy-On-Write. +The temporary file will be removed when the application exits. +This is useful for kernel debugging because it does not require fsck +after the kernel hangs or reboots. +Don't use this flag if you don't understand this paragraph. +The default value is 0.+ +
+
+ちなみに、メディアを書き込み禁止にしたい場合はこれではなく、
+イメージファイルの書き込み権を落としてください。
+By the way, if you want to make the media write-protected,
+clear the write permission from the image file
+(instead of this setting).
+
Specifies whether to cut MPU(68030) FC2 pin. +If 0, the FC2 pin is connected as usual. +If 1, it is disconnected. +The default is 1. +Only if you run the X server on NetBSD/x68k, it needs to be 1.
Cache not implemented+
Data cache not implemented
Except LARF+
Other internal devices-
Other internal devices+
Peripheral devices-
Peripheral devices+
Power Circuit
Cache and FC not implemented+
Data cache not implemented
Not planned@@ -1232,7 +1376,7 @@ This option is temporary and will be dis
68882 not implemented
Areaset-
Text screen+
Contrast+
All other graphics
Not scheduled@@ -1282,28 +1432,28 @@ This option is temporary and will be dis
System port
Text screen-
Power curcuit
Not planned-
Extended memory-
Extended memory+
Cache not implemented+
Data cache not implemented
68882 not implemented@@ -1315,7 +1465,7 @@ This option is temporary and will be dis
Only channel A is connected to the host
Except LARF+
Power Circuit
Data cache not implemented+
68882 not implemented+
68030 cache is not implemented. -Therefore, number of clock cycle is not correct. +68030 instruction cache is implemented but data cache is not. ATC (Address Translation Cache) is differ from and faster than the real 68030.
Status Panel
Supports QEMU "virt" virtual hardware's compatible machine and +it can run NetBSD/virt68k. +You need to specify the kernel by -X option +(or exec-file in configuration). +If you want to install, you also need to specify the ramdisk image by +--initrd option (or exec-initrd in configuration). +And also, you may need to configure serial console +by hostcom-driver in configuration.+ +
Nereid in the real world is a combined Ethernet/memory/USB expansion board. +Of these, the memory can be used to expand main memory, +and areas not used for the main memory can be used as bank memory. +nono supports only ethernet (RTL8019AS) and bank memory among +the functions of the Nereid expansion board. +Main memory expansion is not supported because it's meaningless on emulators. +Also, USB (SL811HS/T) is not planned for implementation.+
Since Nereid can set to two different combinations of addresses and +interrupt vectors by DIPSW, +so up to two boards can be operated at the same time. +Originally, SW6 and SW7 can be arbitrarily combined +(as long as they don't collide), in nono however, for simpility, +SW6 and SW7 are fixed to be OFF on board #0, and +SW6 and SW7 are fixed to be ON on board #1.+
++バンクメモリは、メインメモリとして使わなかった領域を使用します。 +そのため実機でもバンクメモリの容量は DIPSW のメインメモリ割り当て設定 +(SW1-5) に依存します。 +nono に関係する結論だけでいうと、 +メインメモリへの割り当てを一切行わない場合はバンクメモリは 16MB 確保でき、 +メインメモリへの割り当てをいくらかでも行うとバンクメモリは 4MB となります。 +設定の nereidN-ram-size はこの部分を指定していることになります。 +またこの容量とは独立に SW8 でバンクメモリの有効・無効を指定できますので、 +nereidN-ram-size が 0 (以下) というのは SW8 +でバンクメモリを無効にしたことに相当します。 ++
+#0 (nereid0-*) #1 (nereid1-*) + ベースアドレス・割り込みベクタ Base address and interrupt vectors+$ece300,$f9,$fb
(SW7=OFF) +$eceb00,$f8,$fa
(SW7=ON) +バンクメモリウィンドウ Bank memory window+$ee0000
(SW6=OFF) +$ef0000
(SW6=ON) +
Bank memory uses memory areas not used as the main memory. +So the bank memory size depends on the main memory settings (SW1-5). +As a result, +only if you don't allocate any memories to main memory, +the bank memory can be allocated 16MB. +Otherwise, the bank memory will be allocated 4MB. +Thus, nereidN-ram-size specifies this value. +Also, SW8 specifies enable/disable of the bank memory regardless of the size, +nereidN-ram-size = 0 (or less) means disabling the bank memory.+
+++DEVICE = \SYS\WINDRV.SYS ++
Status Panel
Memory Dump Monitor
Memory Dump Monitor
On memory dump monitor, you can choose the output format from byte, word and longword (In m88k, it is represented as byte, halfword and word respectively). Also you can choose 68030/88200 MMU descriptor format (It displays regardless of whether this address is used as descriptor or not). -Disassemble is now merged from disassemble monitor. +Disassemble is now merged from disassemble monitor. On LUNA-I, you can choose m68k and HD64180 disassemble. On LUNA-88K, you can choose m88k and HD64180 disassemble. -On X68030 and NEWS, you can choose m68k disassemble.+On X68030/virt68k/NEWS, +you can choose m68k disassemble.
表示されているダンプ値をダブルクリックすることでメモリの値を編集できます。
編集できるのはメモリと以下の部分のみです。
You can edit the memory value by double click.
-Only memory and the following areas are ediable.
+Only memory and the following areas are editable.
The backend file is also updated immediately when edited. -The last 8 bytes are not editable since there are the clock register.+The only last 8 bytes are not editable since there are the clock registers.
The common plane is not editable.
Text VRAM and text palette
Device Map Monitor
Key input mode
Key input mode
Keycode table in the character mode
Keycode table in the character mode
| HostKey | GuestKey + |
|---|---|
| [/] | [/] + |
| [_] | [_] |
| [ESC] | [ESC] |
| [TAB] | [TAB] |
| [CTRL] | [CTRL] - |
| [BS] | [BS] - |
| [Enter] | [Enter] - |
| [F1] 〜 [F10] | [PF1] 〜 [PF10] - |
| [F11] | [PF10] |
| [SHIFT-L] | [SHIFT-L] |
| [SHIFT-R] | [SHIFT-R] + |
| [Enter] | [Enter] |
| [↑] | [↑] |
| [←] | [←] |
| [→] | [→] @@ -1724,7 +2064,10 @@ the software keyboard window. |
| HostKey | GuestKey - |
|---|---|
| [DEL] | Numpad[DEL] + |
| [BS] | [BS] + |
| [Delete] | [DEL] + |
| [F1] 〜 [F10] | [PF1] 〜 [PF10] + |
| [F11] | [PF10] |
| Numpad[0]〜[9] | Numpad[0]〜[9] |
| Numpad[+] | Numpad[+] |
| Numpad[-] | Numpad[-] @@ -1734,13 +2077,23 @@ the software keyboard window. |
| Numpad[.] | Numpad[.] |
| Numpad[Enter] | Numpad[Enter] |
| HostKey | GuestKey + |
|---|---|
| [Home] | [HOME] + |
| [Insert] | [INS] + |
| [PageUp] | [ROLL UP] + |
| [PageDown] | [ROLL DOWN] + |
| [End] | [UNDO] + |
Key Repeat
Key Repeat
You will see a screen like this. The bold text indicates the characters you need to enter.
-NONO 0.5.0 Emulated ROM Monitor for LUNA-I +NONO 0.7.0 Emulated ROM Monitor for LUNA-I ** NVRAM Initialized. @@ -1890,11 +2243,11 @@ and nono will terminate when the VM is p5.2. OpenBSD/luna88k を実行してみる
Try OpenBSD/luna88k-あおやまさんが OpenBSD/luna88k 7.0 の liveimage を用意されています。 -Aoyama-san has provided a liveimage of OpenBSD/luna88k 7.0.+あおやまさんが OpenBSD/luna88k 7.4 の liveimage を用意されています。 +Aoyama-san has provided a liveimage of OpenBSD/luna88k 7.4.-
ここではこれを起動してみます。- https://twitter.com/ao_kenji/status/1473611893386661888 +
- https://bsd.network/@ao_kenji/111250570715336091
Let's try it.
@@ -1905,10 +2258,10 @@ and nono will terminate when the VM is p and create subdirectories for individual VMs in it (for example ~/nono/luna88k/). -以下のリンクから liveimage-luna88k-raw-20211221.img.gz + 以下のリンクから liveimage-luna88k-raw-20231016.img.gz をダウンロードして展開し、 VM ディレクトリ ~/nono/luna88k/ に置きます。 - Download liveimage-luna88k-raw-20211221.img.gz from the following link, +Download liveimage-luna88k-raw-20231016.img.gz from the following link, extract it and place it in the VM directory, ~/nono/luna88k/.@@ -1947,7 +2300,7 @@ b⏎vmtype = luna88k -spc0-id6-image = hd,liveimage-luna88k-raw-20211221.img +spc0-id6-image = hd,liveimage-luna88k-raw-20231016.img hostnet-driver = noneYou will see a screen like this. The bold text indicates the characters you need to enter.-NONO 0.5.0 Emulated ROM Monitor for LUNA-88K +NONO 0.7.0 Emulated ROM Monitor for LUNA-88K ** NVRAM Initialized. @@ -1975,9 +2328,10 @@ and nono will terminate when the VM is p+ + + +5.3. NetBSD/x68k を実行してみる
Try NetBSD/x68k-つついさんが NetBSD/x68k 9.2 の liveimage を用意されています。 +つついさんが NetBSD/x68k 10.0_BETA の liveimage を用意されています。 ここではこれを起動してみます。 -Tsutsui-san has provided a liveimage of NetBSD/x68k 9.2. Let's try it.+Tsutsui-san has provided a liveimage of NetBSD/x68k 10.0_BETA. +Let's try it.
- どこかに nono 用のディレクトリを用意し(例えば ~/nono/)、 @@ -1993,8 +2347,8 @@ VM ディレクトリ ~/nono/x68k/ に from the following link, extract it and place it in the VM directory, ~/nono/x68k/.
-http://teokurebsd.org/netbsd/liveimage/20210613-x68k/ +http://teokurebsd.org/netbsd/liveimage/20230111-x68k/- 以下の内容の設定ファイル nono.cfg を VM ディレクトリ ~/nono/x68k/ @@ -2007,15 +2361,14 @@ By the way, to simplify the explanation, However, please configure the network if necessary.
-vmtype = x68030 -spc0-id0-image = hd,liveimage-x68k-with-packages-20210613.hds -hostnet-driver = none +spc0-id0-image = hd,liveimage-x68k-with-packages-20230111.hds +hostnet0-driver = none- 初回のみ nono -c ~/nono/x68k --create-sram を実行します。 +
- 初回のみ nono -c ~/nono/x68k --create-sram を実行します。 これで VM ディレクトリに初期状態の SRAM.DAT が作られます。
+This will create an initial SRAM.DAT in the VM directory.Only the first time, run as nono -c ~/nono/x68k --create-sram. -This will create initial SRAM.DAT in the VM directory.- nono -c ~/nono/x68k で起動すると、 HDD から NetBSD/x68k が起動します。 @@ -2044,6 +2397,75 @@ and nono will terminate when the VM is p
+@@ -2071,7 +2493,7 @@ sysinst 等で OS をアップグレー に戻るのがハマりポイントです。5.4. NetBSD/virt68k をインストールしてみる
Try installing NetBSD/virt68k+ +ここでは NetBSD/virt68k をクリーンインストールする手順だけ紹介します。 ++Here I will introduce how to install NetBSD/virt68k.+
++
+- どこかに nono 用のディレクトリを用意し(例えば ~/nono/)、 +その中に VM ディレクトリを用意します (例えば ~/nono/virt68k/)。 +
Create a directory somewhere for nono (for example ~/nono/), +and create subdirectories for individual VMs in it +(for example ~/nono/virt68k/).+ +- 空のディスクイメージを用意します。 +1GB でもインストール自体は出来ますが、もう少し大きいほうが安心です。 +
Prepare an empty disk image file. +You can install it with 1GB at least, +but it would be safer if it was a little larger.++ ++dd if=/dev/zero of=virt68k.img bs=1m count=2048 +- 以下の内容の設定ファイル nono.cfg を VM ディレクトリ ~/nono/virt68k +に作成します。 +ネットワークは別途設定してください。 +
Create a configuration file nono.cfg in the VM directory, ~/nono/virt68k/, +with following contents. +You may also need network configuration.++ ++vmtype = virt68k +virtio-block0-image = virt68k.img +hostcom-driver = stdio +hostnet-driver = auto +- NetBSD/virt68k のインストールセットはまだ用意されてないようなので、 +NetBSD のソースコードから build.sh でビルドします。 +
There doesn't seem to be the official NetBSD/virt68k set available yet. +You have to build it manually from the source code. :(+ +- 以下のコマンドラインで起動します。 +
Run as the following:++ ++nono -c ~/nono/virt68k -f \ + -X <path>/release/virt68k/binary/kernel/netbsd-GENERIC.gz \ + --initrd <path>/release/virt68k/installation/ramdisks/inst-ramdisk.fs +- しばらくすると root パーティションなどを聞かれるので Enter を 4回押します。 +またしばらくすると見慣れたインストーラが起動してきます。 +
After a while, you will be asked about the root partition, etc., +so hit Enter key four times. +After a while again, the familiar installer will start.+++[ 1.0000030] root device (default md0a): ⏎ +[ 1.0200030] dump device (default md0b): ⏎ +[ 1.0300030] file system (default ffs): ⏎ +[ 1.0400030] root on md0a dumps on md0b +[ 1.0600030] kern.module.path=/stand/virt68k/10.99.10/modules +[ 1.1200030] init path (default /sbin/init): ⏎ +[ 1.1400030] init: trying /sbin/init + : +By default, /dev/tap is only accessible to privileged user. You need to chmod /dev/tap (without unit number) appropriately. -Note that upgrading using sysinst always reset the permission to 600.+Note that upgrading using sysinst always resets the permission to 600.bridge(4) インタフェースを作成し、 ホストの外部(物理)インタフェースをブリッジに追加しておきます。 @@ -2237,7 +2659,7 @@ You may write in English.
conditions:
- 成果物が nono のライセンスに従って運用あるいは配布されること。 -
All your work are operated or distributed under the nono license.+All your work will be operated or distributed under the nono license.- ライセンスが将来変わる可能性があること。
The license may be changed in the future.- 著作部分に関して著作者人格権を行使しないこと。