nono is OMRON LUNA-I/LUNA-88K emulator runs on NetBSD and etc. +It can also emulate SHARP X68030 and virt68k. +-nono は NetBSD とかで動作する OMRON LUNA-I とかのエミュレータです。 -
nono is OMRON LUNA-I emulator runs on NetBSD and etc.
Introduction
-nono is OMRON LUNA-I emulator runs on NetBSD and etc. -LUNA88K is still experimental support and it does not work yet. -+1. ビルド方法
How to build
How to execute
Configuration
About VM
Try it
Example of host network setup
Known Issues
How to migrate from old versions
Changes
Contact, License, etc
How to build
Green Background is new or updated paragraph.+
How to build
The followings are required for build. -If you use NetBSD(pkgsrc), -wxWidgets is pkgsrc/x11/wxGTK30 (OPTIONS:gtk2 is recommended).+
The followings are required for build.
+wxWidgets は NetBSD(pkgsrc) なら
+pkgsrc/x11/wxGTK32 (OPTIONS:gtk3 で動作確認) です。
+If you use NetBSD(pkgsrc),
+wxWidgets is pkgsrc/x11/wxGTK32 (OPTIONS:gtk3 is tested).
+
+
(NetBSD 以外でのビルドはサポートしていませんが)
-Ubuntu 18.04 ではたぶん以下のパッケージが必要です。
-You may need the following packages on Ubuntu 18.04
+Ubuntu 22.04 ではたぶん以下のパッケージが必要です。
+
You may need the following packages on Ubuntu 22.04
(though we won't support non-NetBSD platform).
-アーカイブを展開したら以下のようにビルドします。
-configure には環境変数 CC、CXX でコンパイラを指定することが出来ます。
-また wx-config が標準的な名前で提供されていないために見付けられない場合には
-環境変数 WX_CONFIG にパスを指定することが出来ます。
-Extract the archive and build as following.
-You can specify C/C++ compiler using environment variable CC and CXX
-if configure cannot find standard name suitable compiler.
-Also, you can specify wx-config path using environment variable WX_CONFIG
-if configure cannot find wx-config.
+nono のソースアーカイブを展開したら以下のようにビルドします。
+Extract the nono's source archive and build as following.
+
-% ./configure -% make depend -% make +% ./configure [<options>] +% make -DRELEASE depend +% make -DRELEASE % su # make install
-2つの実行ファイルがインストールされます。
+configure には環境変数 CC、CXX でコンパイラを指定することが出来ます。
+wx-config が標準的な名前で提供されていないために見付けられない場合には
+環境変数 WX_CONFIG にパスを指定することが出来ます。
+また configure のオプションとして以下が指定できます。
+You can specify C/C++ compiler using environment variable CC and CXX
+if configure cannot find standard name suitable compiler.
+You can specify wx-config path using environment variable WX_CONFIG
+if configure cannot find wx-config.
+Also, you can specify the following option for configure.
+
+
+
Disable AVX2 support on amd64(x86_64). +By the default, it will generate AVX2 supported binary +only if configure detects that compiler supports AVX2.+
+make install により2つの実行ファイルがインストールされます。
nono が GUI 版実行ファイル、
nono-cli がコマンドライン版です。
-Two executables will be installed.
-nono is GUI executable and nono-cli is
-command line executable.
-
+make install will install two executables.
+nono is the GUI executable and nono-cli is
+the command line executable.
+
Command Line Option
How to execute
nono supports multiple architectures so that +it needs configuration. +See the following Configuration section for +details.+
Command Line Option
Loads and executes host's file. -If file is relative path, -it is path from the current directory. -If the file is gzip'd, it is automatically extracted. -The supported file format (after extracting) is a.out (OMAGIC) or ELF. -Actually, it only assumes bootloaders or kernels. -If this option is specified at the same time as -prom-image in configuration file, -this option preceeds. -
Specifies the VM directory. If omitted, the current directory is used.
Specifies the VM directory/configuration file. +If vmpath is a directory, +make nono.cfg in that directory a configuration file. +Or if vmpath is a file, +make the specified file a configuration file. +And in both cases, +make the directory where that file is located a VM directory. +If -c option is omitted, +vmpath is considered as the current directory.
+nono will create the initial SRAM.DAT for X68030 and exit, +if there is no SRAM.DAT in the VM directory.
Boot as the fast mode. You can change this mode on GUI menu after boot, and the option only changes its initial state. -
-GUI Only. -Specifies the initial fontsize on all sub windows. -height is one of 12 or 16. -The default value is 12. +設定の monitor-fontsize と等価です。 +GUI Only. +Specifies the initial fontsize of all sub windows. You can change this value on GUI menu after boot. -
+Specifies the initial ramdisk image passed to the kernel. +If file is relative path, +it is path from the current directory. +This option is equivalent to exec-initrd in configuration +except for base directory of the relative path.+
-GUI Only. +設定の mainview-scale と等価です。 +起動後はメニューからプリセットされた倍率と +mainview-scale で指定された倍率には変更可能です。 +GUI Only. Specifies the initial main window scale in real number. -You can change this scale on GUI menu after boot, -but unlike this option, there are only a few preset choices -(Should be improved in someday). -The default value is 1.0
Shows the result of reading configuration file and @@ -203,9 +279,65 @@ parsing -V options.
Use this name=value instead of name=configvalue specified in configuration file. -
Loads and executes host's file. +If file is relative path, +it is path from the current directory. +This option is equivalent to exec-file in configuration +except for base directory of the relative path. +If the file is gzip'd, it is automatically extracted. +The supported file format (after extracting) is the following. +Actually, it only assumes bootloaders or kernels. +And note that it may not obtain some information that where did I boot from, +for example.+
a.out (OMAGIC) executable (It probably supports bootloaders only)+
ELF executable +(It probably supports the kernel only. +If the file is assumed to be NetBSD executable, +it will also load symbol tables as the bootloader does to the kernel.)+
+On LUNA, +regardless of prom-image configuration (see below), +it boots the internal emulated PROM. +If luna-dipsw1 configuration meets dipsw-autoboot=yes, +it will immediately load and execute the host file. +Otherwise, it will wait in prompt. +Even in this case, "g" command (in LUNA-I) or "b" command (in LUNA-88K) +will load the host file that is specified by this option. +On X68030, +nono hacks the boot device after normal boot from IPLROM, +and loads and executes the host file. +On virt68k (and NEWS), this is the only way to boot.
For developers:@@ -219,8 +351,8 @@ instead of name=configvalue起動時にデバッガプロンプトで停止します。
Configuration
Configuration
nono's configurations are always applied in the following order.+
Default value+
Contents of ~/.nono.cfg if exists+
Contents of nono.cfg in the VM directory (or the file specified by -c option) if exists+
Command line option+
VM configuration file is nono.cfg in the VM directory. -Its syntax is key = value format, one per line. +知らないキーは警告を出した上で無視します。 +同じキーが複数回現れた場合、 +上に列挙した順に後から書いたほうで上書きし、 +同じファイル内でも同様に後に書いたほうで上書きします。 +コマンドラインオプション -V 等はこれをさらに上書きします。 +コマンドラインオプションで同じキーが複数回現れた場合も後に書いたほうが上書きします。 +++The syntax of both files is key = value format, one per line. White spaces before and after key and value are ignored. -And, blank lines, lines beginning with "#", and -lines with unrecognized key are also ignored. -+Blank lines, lines beginning with "#" are also ignored. +The lines with unrecognized key are ignored with a warning. + +If the same key appears more than once, +the latter overwrites the former in the above order. +If the same key appears in a file, +the latter overwrites the former in the same manner. +Then, command line option -V etc. overwrites them. +If the same key appears more than once in the command line option, +do in the same manner.
+vmtype を除くすべての設定項目はそれぞれデフォルト値を持っています。
+つまり少なくとも vmtype だけは設定ファイルかコマンドラインオプションで指定する必要があります。
+All configuration items except vmtype have default value.
+It means, you must specify at least only vmtype
+by configuration file or commandline option.
設定項目は次の通りです。
The configuration items are:
@@ -253,36 +417,405 @@ lines with unrecognized key are also ign
Specifies the VM type from the following. -This field is mandatory. -+This field is mandatory.
| luna | … LUNA-I - | |
| luna88k | … LUNA88K (experimental) + | |
| luna88k | … LUNA-88K + | |
| x68030 | … X68030 + | |
| news | … NWS-1750 (Just a joke) + | |
| virt68k | … virt68k |
Specifies the TCP port number that debugger listens. -If 0, it will not listen. -The default is 0.
Specifies the X68030's external CGROM image file path. +This CGROM is 768KB. +If the path does not have any path delimiters, +the VM directory and then its parent directory will be searched. +If the path is a relative path, +it will be path from the VM directory, not from the current directory. +If the path is empty, nono's builtin compatible CGROM will be used. +The default value is empty.
Specifies how to synchronize the time in virtual machine. +If real, synchronize with the real time; +if virtual, synchronize with the virtual time. +The default is real. +This feature is under experimentation and may be changed in the future +without notice.
Specifies console driver of the debugger. +stdio, tcp, and none can be specified. +stdio uses the standard input/output. +tcp listens on TCP port using TELNET protocol. +none doesn't make any communication with the host. +The default is none.
Specifies the TCP port number that debugger console driver listens.
Specifies whether to configure DIPSW to boot automatically, +regardless of the models. +"yes" overwrites DIPSW, to boot automatically. +"no" overwrites DIPSW, not to boot automatically. +"" (Empty) does nothing. +The default value is "". +This option only changes the appropriate switch(es) +after the luna-dipsw1 or news-dipsw configuration +is determined by the configuration file or command line options.
Specifies whether to configure DIPSW to use serial console, +regardless of the models. +"yes" overwrites DIPSW, to use serial console. +"no" overwrites DIPSW, not to use serial console. +"" (Empty) does nothing. +The default value is "". +This option only changes the appropriate switch(es) +after the luna-dipsw1 or news-dipsw configuration +is determined by the configuration file or command line options. +If you choose not to use serial console on NEWS, +SW1,2,3 will be set OFF, OFF, ON respectively, +and NWB-512 monochrome console (not implemented) will be chosen.
Specifiies the host file that will be loaded at startup. +This is mostly the same as -X option. +The only one difference is that relative path originates the VM directory.+
Specifies the initial ramdisk image passed to the kernel. +This is mostly the same as --initrd option. +The only one difference is that relative path originates the VM directory.+
Specifies the extended RAM size in MB. +For now, only the following can be specified.+
No extended memory. It's default.+
TS-6BE16 compatible mode. +Its address is from $0100'0000 and the size is 16MB.+
060turbo compatible mode. Its address is from $1000'0000.+
Specifies the number of floppy drives from 0 to 4. +The default is 2.
Specifies a diskimage to be inserted to floppy drive N at startup. +If the path is relative path, it is from the VM directory. +You can also operate them from menu after startup. +The default is empty.
Specifies whether to install FPU or not. +If none, FPU is not installed. +If 68881, 68881 FPU is installed. +68882 is not supported yet. +And, none can also be written as 0, +68881 can also be written as 1. +The default is 68881. +This item cannot be specified on LUNA-I +because (probably) all LUNA-I has 68881. +This item also cannot be specified on virt68k for now.
Specifies whether to use AVX2 acceleration on amd64(x86_64) hosts. +If auto, nono checks whether the host CPU supports AVX2 +on startup and use it if it does. +If no, nono will not execute AVX2 instructions. +The default is auto. +Note that this item is ignored if the host is not amd64(x86_64).+
Specifies the host driver of serial port. +stdio, tcp, and none can be specified. +stdio uses the standard input/output. +tcp listens on TCP port using TELNET protocol. +none doesn't make any communication with the host. +The default is none.
Specifies the TCP port number that host driver listens.
Specifies the behavior when the driver which is selected by +hostcom-driver is unusable; +terminate the process if 0, +or continue to run using the none driver if 1. +The default is 0.
Specifies the input mode of the host keyboard. +char means the character mode, +jp means the Japanese keyboard mode. +The defualt is char. +See About VM for details.
Specifies the host driver of N-th +ethernet device. +afpacket, bpf, and tap can be specified +only if the host OS supports them. +auto and none can always be specified. +afpacket uses Linux's AF_PACKET socket, +bpf uses bpf(4) device, +and tap uses tap(4) interface. +none doesn't make any communication with the host. +If auto is specified, +it tries tap, afpacket, and bpf in that order +(if the host OS supports them). +The default of hostnet0-driver is auto, +the default of hostnet1-driver is none.
Specifies an interface name to bind to, when the host driver is afpacket. +If auto is specified as ifname, +it selects an usable interface automatically. +The default is auto. +Note that this host driver cannot communicate with the localhost.
Specifies an interface name to bind to, when the host driver is bpf. +If auto is specified as ifname, +it selects an usable interface automatically. +The default is auto. +Note that this host driver cannot communicate with the localhost.
+Specifies a device pathname, when the host driver is tap. +The default is auto. +The behavior in this case depends on the host OS. +On Linux, it's the same as /dev/net/tun. +On OpenBSD, it will try from /dev/tap0 to /dev/tap9 +until successful. +On NetBSD (and FreeBSD), it will try cloning by /dev/tap first. +If that fails, then try from /dev/tap0 to /dev/tap9 +until successful. +In all cases, you need to prepare two shell script files which names are +nono-ifup and nono-ifdown in the VM directory or +its parent directory. +Even if you don't have anything to do in these scripts, +you need to prepare empty scripts that will terminate successfully.
Specifies the behavior when the driver which is selected by +hostnetN-driver is unusable; +terminate the process if 0, +or continue to run using the none driver if 1. +The default is 0.
Specifies the X68030's external IPLROM image file path. +This one contains 128KB at 0xfe0000..0xffffff and is known as IPLROM30. +If the path does not have any path delimiters, +the VM directory and then its parent directory will be searched. +If the path is a relative path, +it will be path from the VM directory, not from the current directory. +If the path is empty, the public released IPLROM30 will be used. +The default value is empty.
Specifies the X68030's external IPLROM image file path. +This one contains 128KB at 0xfc0000..0xfdffff and is known as ROM30. +If the path does not have any path delimiters, +the VM directory and then its parent directory will be searched. +If the path is a relative path, +it will be path from the VM directory, not from the current directory. +If the path is empty, internal emulated ROM will be used. +The ROM supports only enough SCSI IOCS to boot NetBSD/x68k. +The default value is empty.
Specifies whether to connect keyboard on boot. +If 1, it is connected; if 0, it isn't connected. The default is 1. +You can change it on GUI menu after boot.
+Specifies whether nono corrects RTC emulation for OSes +that adopts wrong RTC epoch on LUNA. +0 means making no correction +(this is the same behavior as the actual machine). +1 means making correction +(this is the same behavior as the real world). +The default is 1. Normally, leave it 1.+
+LUNA で採用している RTC (MK48T02) は2桁で保持している年の値が +4 で割り切れる年をうるう年とする仕様です。 +ところが NetBSD/luna68k、OpenBSD/luna88k などはこの +RTC の年の値を 1970年からの経過年として使用しています。 +例えば1970年はうるう年ではないため 2月28日の翌日は 3月1日ですが、 +MK48T02 的には 00年であるためうるう年と認識し 2月28日の翌日が2月29日になります。 +このように、これらの OS を使っている場合実機の +RTC は4年のうち約2年間、1日ずれた日付を指しているようです。 +しかしながら、RTC の時刻は OS 起動時に一度読んだ後は基本的に参照しない上、 +今時必要なら NTP で時間を合わせるため、 +実機でも問題が顕在化することはまずないと思います。 +nono の場合は実機と異なり、アプリケーション実行中しか RTC が進まないため、 +補正がない場合の動作が問題になるのは +nono を起動したまま偶数年の2月末日から日付をまたいで、 +かつ nono を起動したまま OS を再起動して NTP などで時刻修正を行わなかった時 +だけだと思います。 +このオプションはほぼ開発者向けの動作確認用です。
Specifies status of the front panel DIPSW#1-1..#1-8 using 8 digit. +< → NetBSD/luna68k: InformationSpecifies status of the front panel DIPSW#1-1..#1-8 using 8 digits. "0" means DOWN and "1" means UP. The first character corresponds to #1 and the eighth character corresponds to #8.@@ -294,14 +827,24 @@ See the following link about DIPSW.
On LUNA88K, the default value is 11111111. +On LUNA-88K, the default value is 11111111. See the following link about DIPSW.
→ OpenBSD manual pages: boot_luna88k(8)
+自動起動するかどうかとシリアルコンソールを使うかどうかを指定したい場合は
+こちらではなく
+dipsw-autoboot、dipsw-serial
+設定を使うほうが便利です。
+If you only want to specify whether to autoboot and/or
+to use serial console,
+dipsw-autoboot, dipsw-serial
+configurations are useful.
Specifies status of the front panel DIPSW#2-1..#2-8. @@ -316,44 +859,152 @@ DIPSW#2 が "11111111" なら if the DIPSW#2 is "11111111". Otherwise, the bootloader will enter interactive mode. (I doubt that they actually wanted to switch with only #8) - -
Specifies number of planes on LUNA video board. +The valid values are 1, 4 or 8. +1 means a monochrome video board, +4 means 16-color (4bpp) video board, +8 means 256-color (8bpp) video board. +The default value is 4.
Specifies refresh rate of all text monitor windows in Hz. It ranges from 1 to 60. The default is 20Hz. -You can change this value on GUI menu after boot, -but unlike this configuration value, there are only a few preset choices. -
Specifies the MPU clock in MHz. -The default value is 20MHz on LUNA-I, or 25MHz on LUNA88K.
Specifies whether install Nereid expansion board or not. +Up to two board can be operated at the same time. +If 0, the board is not installed. +If 1, the board is installed. +The default value is 0. +See also Section 4.6 Nereid below for details.
This can disable only NIC (RTL8019AS) of Nereid expansion board +(although it's not possible normally in the real world). +It's disabled if 0, or enabled if 1. +The default is 1. Normally, leave it 1. +This item will be ignored if the corresponding nereidN-enable +is 0.
Specifies bank memory size in MB of Nereid expansion board. +The valid values are 0, 4 or 16. +If 0, disable the bank memory. +The default is 16. +This item will be ignored if the corresponding nereidN-enable +is 0.+
Specifies status of the DIPSW using 8 digits. +"0" means OFF and "1" is ON. +The first character corresponds to SW1 and +the eighth character corresponds to SW8. +The default valus is 00001000.+
See the following link about DIPSW.
+自動起動するかどうかとシリアルコンソールを使うかどうかを指定したい場合は
+こちらではなく
+dipsw-autoboot、dipsw-serial
+設定を使うほうが便利です。
+If you only want to specify whether to autoboot and/or
+to use serial console,
+dipsw-autoboot, dipsw-serial
+configurations are useful.
Specifies the LUNA-I/LUNA88K's external ROM image file path. +Specifies the LUNA-I/LUNA-88K's external ROM image file path. If the path does not have any path delimiters, the VM directory and then its parent directory will be searched. If the path is a relative path, -it will be path from the VM directory, not from the current -directory. +it will be path from the VM directory, not from the current directory. If the path is empty, internal emulated ROM will be used. The default value is empty.実機を持っていない場合はこの値を空に (= デフォルトのままに) しておくと、 -nono 内蔵のなんちゃって下位互換 ROM で起動します(現状 LUNA-I のみ)。 +nono 内蔵のなんちゃって下位互換 ROM で起動します。
If you does not have the real LUNA machines, you can boot with nono's internal downward compatible emulated ROM -if you set this field empty (or leave it as the default). -For now, it's only for LUNA-I. -+if you set this field empty (or leave it as the default).
LUNA-I 実機を持っている場合は ROM ファイルを指定することで実機 ROM で起動できます。 @@ -365,52 +1016,125 @@ you can boot with the real ROM spcifying The ROM file is extracted from 0x41000000-0x4101ffff (128KB) of the real LUNA-I machine. For now, only V4.22 (Thu Jul 27 11:45:42 1989) is supported. -I have no idea about other ROMs. - +I have no idea about other ROMs.
-LUNA88K 実機の場合は 0x41000000-0x4103ffff (256KB) を保存したものです。
-ただし現状サポートしていません。
+LUNA-88K 実機の場合は 0x41000000-0x4103ffff (256KB) を保存したものです。
+今のところ ROM は version 1.20 のみサポートしています。
-For LUNA88K,
+For LUNA-88K,
the ROM file is extracted from 0x41000000-0x4103ffff (256KB).
-However, it's not supported yet.
-
Specifies the RAM size in MB. -The default is 16MB on LUNA-I or 64MB on LUNA88K. -Not supported yet.
Specifies the RAM size in MB.+
On LUNA-I, the default is 16MB. +If the size is less than 16MB, you can specify in 4MB unit. +If larger, you can specify up to 512MB in 1MB unit. +However, if you have prom-image with the real image, +the maximum is limited to 255MB. +By the way, NetBSD/luna68k needs at least 8MB to boot.+
On LUNA-88K, the default is 64MB. +If the size is less than 64MB, you can specify in 16MB unit. +If larger, you can specify up to tentative 512MB in 1MB unit. +However, if you have prom-image with the real image, +the maximum is limited to 240MB.+
On X68030, the default is 12MB. +You can specify it in 1MB unit from 4MB to 12MB. +See extram-size for extended memory.+
On NWS-1750, This is 16MB fixed for now.+
On virt68k, the default is 128MB and +the range is 16MB to 4080MB. +If the specified size is not divisible by 16MB, +it will be rounded up to 16MB.+
Specifies the RTC (MK48T02) epoch year. +The default is 1970. +Since both NetBSD/luna68k and OpenBSD/luna88k use 1970 as epoch year, +there is no need to touch this value. +If you boot 4.4BSD on LUNA-I as the guest OS, specify 1900. +On NEWS, it is fixed at 1900.
Specifies whether to display the status panel or not. +If 0, it is hidden; if 1, it is shown. +The default is 1 (show). +You can change it on GUI menu after boot.
-Specifies SCSI device. N is 0 to 7. +Specifies SCSI device and image. N in the key is 0 to 7. But don't specify ID 7 because the host uses it. The value is in a form of device type devtype and -the image path path separated by ","(comma). -For now, only "hd" (hard disk) can be specified for devtype. -If the path is relative path, it is from the VM directory. -+the disk image path path separated by ","(comma). +devtype can be one of the following: +
-例えば、nono.cfg と同じディレクトリに置いたディスクイメージ luna.img
-を使う場合、
-LUNA-I では通常 ID 6 をプライマリ HDD に割り当てるのでこんな感じになります。
-
+例えば、nono.cfg と同じディレクトリに置いた sd0.img を
+起動 HDD ディスクイメージとして使い
+(LUNA では通常 ID 6 をプライマリ HDD に割り当てます)、
+ID 5 に同じディレクトリの install.iso をセットした CD ドライブを、
+ID 4 に起動時メディアなしの MO ドライブを接続する場合は次のようになります。
+For example, if you use disk image luna.img placed in the same
-directory as nono.cfg,
-since LUNA-I usually assigns ID 6 to the primary HDD,
+devtype が hd なら path は省略できません。
+devtype が cd か mo なら path は省略可能です。
+イメージパスが相対パスなら VM ディレクトリからの相対パスになります。
+
+If devtype is hd, path cannot be ommitted.
+If devtype is cd or mo, path can be ommitted.
+If the path is relative path, it is from the VM directory.
+
+For example, if you use a harddisk image sd0.img placed in the same
+directory as nono.cfg
+(LUNA usually assigns ID 6 to the primary HDD),
+ID 5 for CD-ROM drive that loads install.iso in the same directory,
+and ID 4 for MO drive without media on boot,
write as following:
-spc0-id6-image = hd,luna.img
+spc0-id6-image = hd,sd0.img
+spc0-id5-image = cd,install.iso
+spc0-id4-image = mo
Specifies whether nono writes a writing to SCSI HD devices back +to the diskimage. +0 means normal operation (writes to the diskimage). +1 means that nono will not write to the diskimage back. +Data that the guest wrote to the device will be written to a temporary file +in the VM directory, +like Copy-On-Write. +The temporary file will be removed when the application exits. +This is useful for kernel debugging because it does not require fsck +after the kernel hangs or reboots. +Don't use this flag if you don't understand this paragraph. +The default value is 0.+
+ちなみに、メディアを書き込み禁止にしたい場合はこれではなく、
+イメージファイルの書き込み権を落としてください。
+By the way, if you want to make the media write-protected,
+clear the write permission from the image file
+(instead of this setting).
Obsolete. +Use spc0-idN-writeignore instead. +This option is for developers.
Specifies whether to synchronize a RAM size field in SRAM +with real RAM size or not. +If 0, the application will do nothing (as same as the real). +If 1, the application updates(synchronizes) +$ed0008.L (RAM size) in SRAM with configuration value of ram-size. +This update is performed once only if +the SRAM magic string is correct at the application startup. +The default is 1.
Specifies virtio block device's image. +N in the key is 0 to 7 for now. +If the path is relative path, it is from the VM directory.+
Specifies whether nono ignores writing to SCSI devices. -0 means normal operation (writes to the devices). -If 1 is specified, -nono will not actually write back to the disk image -even though the write command is succeeded. -nono's SCSI devices acts as -write command is successfully done but it never writes back -to the actual disk image. +Specifies whether nono writes a writing to virtio block devices back +to the diskimage. +0 means normal operation (writes to the diskimage). +1 means that nono will not write to the diskimage back. +Data that the guest wrote to the device will be written to a temporary file +in the VM directory, +like Copy-On-Write. +The temporary file will be removed when the application exits. This is useful for kernel debugging because it does not require fsck -after the kernel hangs. -But don't use this flag if you don't understand this paragraph. -The default value is 0. -
+
+ちなみに、メディアを書き込み禁止にしたい場合はこれではなく、
+イメージファイルの書き込み権を落としてください。
+By the way, if you want to make the media write-protected,
+clear the write permission from the image file
+(instead of this setting).
+
Specifies whether to cut MPU(68030) FC2 pin. +If 0, the FC2 pin is connected as usual. +If 1, it is disconnected. +The default is 1. +Only if you run the X server on NetBSD/x68k, it needs to be 1.
Try it
Tsutsui-san has provided NetBSD/luna68k 9.0 liveimage for this -(Thanks as always).+ +
About VM
Implementation Status
| ◎ | : ほぼ実装済み Mostly implemented+ |
| ○ | : 困らない程度には実装済み Works+ |
| △ | : とりあえず動いてる程度 Works somehow+ |
| × | : 未実装 Not implemented+ |
| — | : 実装予定なし Not planned+ |
| LUNA-I + | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MPU (68030) + | ○ + | データキャッシュ未実装 Data cache not implemented+ FPU (68881)
+ | ◎
+ |
+ | BT454
+ | ◎
+ |
+ | CRTC2
+ | ○
+ | 標準で使用する値のみサポート
+ | Frame buffer
+ | ◎
+ |
+ | Keyboard/Mouse
+ | ◎
+ |
+ | SIO (uPD7201)
+ | ◎
+ |
+ | PIO (8255)
+ | ○
+ |
+ | Ethernet (AM7990)
+ | ◎
+ |
+ | NVRAM&RTC (MK48T02)
+ | ◎
+ |
+ | Front LCD
+ | ◎
+ |
+ | SPC (MB89352)
+ | ◎
+ |
+ | SCSI HD/CD/MO Devices
+ | ○
+ |
+ | XP(HD647180) CPU
+ | △
+ |
+ | XP(HD647180) Timer0/1
+ | ○
+ |
+ | XP(HD647180) その他の内蔵デバイス | Other internal devices+ ×
+ |
+ | XP 周辺デバイス | Peripheral devices+ ×
+ |
+ | 電源 | Power Circuit+ ○
+ |
+ | LUNA-88K specific
+ | MPU (88100 part)
+ | ○
+ | マルチプロセッサ未実装、バグも未実装? | MP (and bugs?) not implemented+ MPU (88200 part)
+ | ◎
+ |
+ | MPU (88110)
+ | —
+ | 実装予定なし | Not planned+ FUSEROM
+ | ○
+ |
+ | X68030
+ | MPU (68030)
+ | ○
+ | データキャッシュ未実装 | Data cache not implemented+ MPU (68EC030)
+ | —
+ | 実装予定なし | Not planned+ FPU (68881)
+ | ◎
+ | 68882 は未実装 | 68882 not implemented+ DMAC
+ | △
+ |
+ | CRTC/VC
+ | △
+ | 768x512 のテキスト画面のみサポート | Only 768x512 text screen supported+ FDC/FDD
+ | ○
+ |
+ | 標準・拡張エリアセット | Areaset+ ◎
+ |
+ | ADPCM/OPM
+ | ×
+ |
+ | テキスト画面 | Text screen+ ○
+ |
+ | コントラスト | Contrast+ ◎
+ |
+ | グラフィック機能全般 | All other graphics+ ×
+ | 当面予定なし | Not scheduled+ Keyboard
+ | ◎
+ | TVコントロールを除く | Except TV Control+ Mouse
+ | ◎
+ | 本体接続のみ
+ | MFP
+ | △
+ |
+ | PPI (8255)
+ | △
+ |
+ | Printer
+ | ×
+ |
+ | RTC
+ | ◎
+ | アラームを除く | Except Alarm+ SPC (MB89352)
+ | ◎
+ |
+ | SCSI HD/CD/MO Devices
+ | ○
+ |
+ | SCC (Z8530)
+ | ◎
+ |
+ | SRAM
+ | ◎
+ |
+ | システムポート | System port+ △
+ |
+ | 電源 | Power curcuit+ ○
+ |
+ | Nereid Ethernet
+ | ◎
+ |
+ | Nereid Bank memory
+ | ◎
+ |
+ | Nereid USB
+ | —
+ | 実装予定なし | Not planned+ 拡張メモリ | Extended memory+ ○
+ |
+ | Windrv
+ | △
+ |
+ | NWS-1750
+ | MPU (68030)
+ | ○
+ | データキャッシュ未実装 | Data cache not implemented+ FPU (68881)
+ | ◎
+ | 68882 は未実装 | 68882 not implemented+ PROM
+ | ×
+ |
+ | SCC (Z8530)
+ | ◎
+ | チャンネル A のみホストに接続 | Only channel A is connected to the host+ Ethernet (AM7990)
+ | ◎
+ |
+ | NVRAM&RTC (MK48T02)
+ | ◎
+ |
+ | Video Board
+ | ×
+ |
+ | Keyboard/Mouse
+ | ×
+ |
+ | SCSI Controller
+ | ×
+ |
+ | IDROM, DIP-SW, 100Hz Timer, 診断用LED
+ | ○
+ |
+ | AST, Lv2Intr
+ | ×
+ |
+ | 電源 | Power Circuit+ ×
+ |
+ | virt68k
+ | MPU (68030)
+ | ○
+ | データキャッシュ未実装 | Data cache not implemented+ FPU (68881)
+ | ◎
+ | 68882 は未実装 | 68882 not implemented+ Goldfish PIC
+ | ◎
+ |
+ | Goldfish RTC
+ | ◎
+ |
+ | Goldfish Timer
+ | ○
+ |
+ | Goldfish TTY
+ | ○
+ |
+ | virtio v1.0 block
+ | ○
+ |
+ | virtio v1.0 net
+ | △
+ |
+ | Power Control
+ | ○
+ |
+ | | ||||||||
68030 instruction cache is implemented but data cache is not. +ATC (Address Translation Cache) is differ from and faster than the real 68030.+
Supports QEMU "virt" virtual hardware's compatible machine and +it can run NetBSD/virt68k. +You need to specify the kernel by -X option +(or exec-file in configuration). +If you want to install, you also need to specify the ramdisk image by +--initrd option (or exec-initrd in configuration). +And also, you may need to configure serial console +by hostcom-driver in configuration.+ +
Nereid in the real world is a combined Ethernet/memory/USB expansion board. +Of these, the memory can be used to expand main memory, +and areas not used for the main memory can be used as bank memory. +nono supports only ethernet (RTL8019AS) and bank memory among +the functions of the Nereid expansion board. +Main memory expansion is not supported because it's meaningless on emulators. +Also, USB (SL811HS/T) is not planned for implementation.+
Since Nereid can set to two different combinations of addresses and +interrupt vectors by DIPSW, +so up to two boards can be operated at the same time. +Originally, SW6 and SW7 can be arbitrarily combined +(as long as they don't collide), in nono however, for simpility, +SW6 and SW7 are fixed to be OFF on board #0, and +SW6 and SW7 are fixed to be ON on board #1.+
++バンクメモリは、メインメモリとして使わなかった領域を使用します。 +そのため実機でもバンクメモリの容量は DIPSW のメインメモリ割り当て設定 +(SW1-5) に依存します。 +nono に関係する結論だけでいうと、 +メインメモリへの割り当てを一切行わない場合はバンクメモリは 16MB 確保でき、 +メインメモリへの割り当てをいくらかでも行うとバンクメモリは 4MB となります。 +設定の nereidN-ram-size はこの部分を指定していることになります。 +またこの容量とは独立に SW8 でバンクメモリの有効・無効を指定できますので、 +nereidN-ram-size が 0 (以下) というのは SW8 +でバンクメモリを無効にしたことに相当します。 ++
+#0 (nereid0-*) #1 (nereid1-*) + ベースアドレス・割り込みベクタ Base address and interrupt vectors+$ece300,$f9,$fb
(SW7=OFF) +$eceb00,$f8,$fa
(SW7=ON) +バンクメモリウィンドウ Bank memory window+$ee0000
(SW6=OFF) +$ef0000
(SW6=ON) +
Bank memory uses memory areas not used as the main memory. +So the bank memory size depends on the main memory settings (SW1-5). +As a result, +only if you don't allocate any memories to main memory, +the bank memory can be allocated 16MB. +Otherwise, the bank memory will be allocated 4MB. +Thus, nereidN-ram-size specifies this value. +Also, SW8 specifies enable/disable of the bank memory regardless of the size, +nereidN-ram-size = 0 (or less) means disabling the bank memory.+
+++DEVICE = \SYS\WINDRV.SYS ++
Status Panel
The performance meter's icon at the center of the status panel +shows the VM speed status. +You can switch full speed / syncronized mode by double-clicking +on this icon.+
+| …
+ |
+マークなしの場合、ユーザが等速モードを指定していて、等速モードで実行中です。
+ | When no icons are displayed, +the user has specified syncronized mode and +the VM is running in synchronized mode.+
+ | …
+ |
+三角3つの場合、ユーザが高速モードを指定していて、高速モードで実行中です。
+高速モード中はパーセントではなく何倍速で動作しているかを表します。
+ | When an icon (three triangles) is displayed, +the user has specified full speed mode and +the VM is running in full speed mode. + |
Memory Dump Monitor
On memory dump monitor, +you can choose the output format from byte, word and longword +(In m88k, it is represented as byte, halfword and word respectively). +Also you can choose 68030/88200 MMU descriptor format +(It displays regardless of whether this address is used as descriptor or not). +Disassemble is now merged from disassemble monitor. +On LUNA-I, you can choose m68k and HD64180 disassemble. +On LUNA-88K, you can choose m88k and HD64180 disassemble. +On X68030/virt68k/NEWS, +you can choose m68k disassemble.+
+表示されているダンプ値をダブルクリックすることでメモリの値を編集できます。
+編集できるのはメモリと以下の部分のみです。
+You can edit the memory value by double click.
+Only memory and the following areas are editable.
+
The backend file is also updated immediately when edited. +The only last 8 bytes are not editable since there are the clock registers.+
The common plane is not editable.+
The backend file is also updated immediately when edited.+
Text VRAM and text palette+
Device Map Monitor
Key input mode
LUNA and X68030 has the Japanese keyboard +(though I ever heard there are US keyboard for LUNA...). +So nono provides two input modes +for Japanese keyboard users and non Japanese keyboard users. +Both have advantages and disadvantages.+
+JP キーボードモードは、ホストが日本語キーボードであることを前提に
+対応するキーの押下、開放をその都度 VM に入力します。
+メリットとしては動作が実機に近くなり、
+特にキーリピート(をハードウェアが行わないこと)も忠実に再現可能です。
+デメリットは ALT + TAB やアクセラレータキーでメニューを開く場合などに
+キー入力が残ることがあることです
+(キーを押した後でフォーカスが外れるとキーを離したことが
+アプリケーションに通知されないため)。
+またホストが日本語キーボードでなければ使いづらいです。
+JP keyboard mode assumes that the host uses the Japanese keyboard.
+Each time you presses and releases a key,
+nono sends the corresponding key-pressed or key-released to the VM.
+One advantage is that it's close to the real machine behavior,
+and another is that it can reproduce
+the LUNA keyboard itself does not perform a key repeat.
+On the other hand,
+one disadvantage is that key sometimes remains pressed,
+especially when you enter ALT + TAB to switch the application
+or enter accelerator key to open the menu
+(If the application loses the focus after the key is pressed,
+the application will not receive the subsequent key release).
+And another disadvantage is that
+it will be hard to use for non Japenese keyboard users.
+
+一方、キャラクタ入力モードは、ホストから入力された「文字」を
+再び LUNA/X68030 のキーコードに解釈し直して VM に入力するモードです。
+例えばゲスト OS に "@" を入力したい場合、
+US キーボードなら [SHIFT] + [2] を、
+JP キーボードなら [@] キーを押しますが、
+どちらも VM には [@] キーの押下、[@] キーの開放が連続して送られます。
+US キーボードで [SHIFT] を押したことは通知されません。
+逆に "=" を入力したい場合、
+US キーボードなら [=] キーを、
+JP キーボードなら [SHIFT] + [-] を押しますが、
+どちらも VM には
+[SHIFT]押下 → [-]押下 → [-]開放 → [SHIFT]開放のシーケンスが送られます。
+このようにホストキーボードのレイアウトによらず、
+入力したい文字が入力できるようになり、
+通常のタイピングで困ることはないと思います。
+デメリットは、通常の文字入力以外のタイピングはほぼ出来ないことです。
+[SHIFT] キーを押したままにすることや、
+文字が入力できないキーの組み合わせは入力出来ません。
+もう一つのデメリットはキーリピート(をハードウェアが行わないこと)が再現できず、
+ホスト側のキーリピートが効いてしまうことです
+(本来キーリピートが動作しない ROM やブートローダでもキーリピートが効くことは
+一般ユーザからはメリットに感じられるかも知れませんが)。
+In contrast, in the character mode, when you type a character,
+nono re-converts it into the LUNA/X68030's key code and sends it to the VM.
+For example if you want to type "@" in the guest OS,
+you would press [SHIFT] + [2] on the US keyboard or [@] on the JP keyboard.
+In both cases, the sequence of
+[@]-pressed and [@]-released will be sent to the VM.
+Note that the fact that you pressed [SHIFT] key on the US keyboard
+will not be sent to the VM.
+Another example, if you want to type "=",
+you would press [=] on the US keyboard or [SHIFT] + [-] on the JP keyboard.
+In both cases, the sequence of
+[SHIFT]-pressed, [-]-pressed, [-]-released, and [SHIFT]-released
+will be sent to the VM.
+Thus, you can type what character you want to type,
+regardless of your keyboard layout.
+Of course there are some disadvantages.
+Firstly, it's hard to type any special characters,
+for example, you can not type any key conbinations
+that don't generate a character.
+Or you can not hold [SHIFT] key pressed.
+Secondly, the key repeat works (by the host),
+even though it should not work as a correct emulation
+(Although some of you may feel it an advantage).
+
Keycode table in the character mode
The following table shows the correspondence between +the character that typed from the host +and the key that will be sent to the VM. +nono can recognize the function keys and arrow keys. +The keys that not listed in this table can +only be typed from the software keyboard window.+
+
| HostChar | GuestKey + |
|---|---|
| a 〜 z | [A] 〜 [Z] + |
| 0 〜 9 | [0] 〜 [9] + |
| SPACE | [SPACE] + |
| - | [-] + |
| ^ | [^] + |
| \ | [\] + |
| @ | [@] + |
| [ | [[] + |
| ; | [;] + |
| : | [:] + |
| ] | []] + |
| , | [,] + |
| . | [.] + |
| / | [/] + |
| HostChar | GuestKey + |
|---|---|
| A 〜 Z | [SHIFT]+[A] 〜 [SHIFT]+[Z] + |
| ! | [SHIFT]+[1] + |
| " | [SHIFT]+[2] + |
| # | [SHIFT]+[3] + |
| $ | [SHIFT]+[4] + |
| % | [SHIFT]+[5] + |
| & | [SHIFT]+[6] + |
| ' | [SHIFT]+[7] + |
| ( | [SHIFT]+[8] + |
| ) | [SHIFT]+[9] + |
| = | [SHIFT]+[-] + |
| ~ | [SHIFT]+[^] + |
| | | [SHIFT]+[\] + |
| ` | [SHIFT]+[@] + |
| { | [SHIFT]+[[] + |
| + | [SHIFT]+[;] + |
| * | [SHIFT]+[:] + |
| ] | [SHIFT]+[]] + |
| < | [SHIFT]+[,] + |
| > | [SHIFT]+[.] + |
| ? | [SHIFT]+[/] + |
| _ | [SHIFT]+[_] + |
| HostChar | GuestKey + |
|---|---|
| F1 〜 F10 | [PF1] 〜 [PF10] + |
| F11 | [PF10] + |
| ↑ | [↑] + |
| ← | [←] + |
| → | [→] + |
| ↓ | [↓] + |
| ^@ | [CTRL]+[@] + |
| ^A 〜 ^Z | [CTRL]+[A] 〜 [CTRL]+[Z] + |
| ^[ | [ESC] + |
| ^\ | [CTRL]+[\] + |
| ^] | [CTRL]+[]] + |
| ^^ | [CTRL]+[^] + |
| ^_ | [CTRL]+[_] + |
| ^H | [BS] + |
| ^I | [TAB] + |
| ^M | [Enter] + |
Keycode table in the JP keyboard mode
The following table shows the correspondence between +the host key and the guest key. +The keys that not listed in this table can only be entered from +the software keyboard window.+
+
| HostKey | GuestKey + |
|---|---|
| [0] 〜 [9] | [0] 〜 [9] + |
| [A] 〜 [Z] | [A] 〜 [Z] + |
| [-] | [-] + |
| [^] | [^] + |
| [\] | [\] + |
| [@] | [@] + |
| [[] | [[] + |
| [;] | [;] + |
| [:] | [:] + |
| []] | []] + |
| [,] | [,] + |
| [.] | [.] + |
| HostKey | GuestKey + |
|---|---|
| [/] | [/] + |
| [_] | [_] + |
| [ESC] | [ESC] + |
| [TAB] | [TAB] + |
| [CTRL] | [CTRL] + |
| [SHIFT-L] | [SHIFT-L] + |
| [SHIFT-R] | [SHIFT-R] + |
| [Enter] | [Enter] + |
| [↑] | [↑] + |
| [←] | [←] + |
| [→] | [→] + |
| [↓] | [↓] + |
| HostKey | GuestKey + |
|---|---|
| [BS] | [BS] + |
| [Delete] | [DEL] + |
| [F1] 〜 [F10] | [PF1] 〜 [PF10] + |
| [F11] | [PF10] + |
| Numpad[0]〜[9] | Numpad[0]〜[9] + |
| Numpad[+] | Numpad[+] + |
| Numpad[-] | Numpad[-] + |
| Numpad[*] | Numpad[*] + |
| Numpad[/] | Numpad[/] + |
| Numpad[=] | Numpad[=] + |
| Numpad[.] | Numpad[.] + |
| Numpad[Enter] | Numpad[Enter] + |
| HostKey | GuestKey + |
|---|---|
| [Home] | [HOME] + |
| [Insert] | [INS] + |
| [PageUp] | [ROLL UP] + |
| [PageDown] | [ROLL DOWN] + |
| [End] | [UNDO] + |
Key Repeat
On LUNA, +key repeat is done by software(OS), not by the keyboard hardware. +For this reason, +key repeat doesn't occur on LUNA's PROM or NetBSD/luna68k's bootloader +that don't implement it, and +key repeat occurs on NetBSD/luna68k kernel that implements it. +Since the timing of key repeat is measured by the guest software, +if the VM is running faster than the real, +the key repeat will occur faster, too. +The host application doesn't have the way to avoid it. +Therefore, nono will temporarily suppress the full speed mode +while any keys are pressed. +That is why the above-mentioned icon distinguishes them. +If keys continue to be pressed for some reasons, +the VM also continues to run syncronized mode. +In this case, you can resolve it by using the software keyboard window.+
Try it
Try NetBSD/luna68k
Tsutsui-san has provided a liveimage of NetBSD/luna68k 9.2.+ +ここではこれを起動してみます。
Let's try it.
Create a directory somewhere for nono (for example ~/nono/), -and create subdirectory for individual VMs in it (for example ~/nono/luna).+and create subdirectories for individual VMs in it +(for example ~/nono/luna/).
Download imagefile from the following link, -extract it and place it in the VM directory, ~/nono/luna.+extract it and place it in the VM directory, ~/nono/luna/.
-http://teokurebsd.org/netbsd/liveimage/20200518-luna68k/ +http://teokurebsd.org/netbsd/liveimage/20210910-luna68k/-
Create a configuration file nono.cfg in the same VM directory, ~/nono/luna, -with following contents:+
Create a configuration file nono.cfg in the VM directory, ~/nono/luna/, +with following contents. +By the way, to simplify the explanation, we assume there is no network here. +However, please configure the network if necessary.
+vmtype = luna -spc0-id6-image = hd,liveimage-luna68k-raw-20200518.img +spc0-id6-image = hd,liveimage-luna68k-with-packages-20210910.img +hostnet-driver = none
Run as nono -c ~/nono/luna. (NVRAM.DAT will be created automatically in the VM directory)+
The emulated ROM Monitor will be executed. Then, only for the first time, entering the following can boot NetBSD.+
+画面はこんな感じのはずです (太字が入力部分)。 ++k⏎ +⏎ +⏎ +d⏎ +boot⏎ +g⏎ +x⏎ +
You will see a screen like this. The bold text indicates +the characters you need to enter.
この内容は NVRAM.DAT に記録されているので次回以降は直接 NetBSD が起動します。 --k -[Enter] -[Enter] -d -boot -g -x +NONO 0.7.0 Emulated ROM Monitor for LUNA-I + +** NVRAM Initialized. + +>k⏎ +controller: dk ?⏎ +drive unit: 0 ?⏎ +partition : c ?d⏎ +filename : vmunix ?boot⏎ +>g⏎ +Loaded. Entry point = $00700000 +>x⏎
The information you have just entered is recorded in NVRAM, -so next time it boots NetBSD automatically.+
The information you have just entered is recorded in the NVRAM, +so next time it will boot NetBSD automatically.+
At the first boot, you will see the console stops after printing +"Updating fontconfig cache". +This is because the infamous fontconfig takes very looooong time. +nono would not have hang-up. +In addition, at the first boot, you will feel it's too heavy for several hours. +This is because the infamous makemandb(8) runs heavily in the background +for a looooong time. +It's very sad to me that these two accidents which are far from the ideal +are the first experiences of newcomers.+ +
To quit, type “shutdown -p now” as the root user. +LUNA can be powered off by software, +and nono will terminate when the VM is powered off.
Try OpenBSD/luna88k
Aoyama-san has provided a liveimage of OpenBSD/luna88k 7.4.+ +ここではこれを起動してみます。
Let's try it.+
Create a directory somewhere for nono (for example ~/nono/), +and create subdirectories for individual VMs in it +(for example ~/nono/luna88k/).+ +
Download liveimage-luna88k-raw-20231016.img.gz from the following link, +extract it and place it in the VM directory, ~/nono/luna88k/.+
+http://www.nk-home.net/~aoyama/liveimage/ +-
Setup network
Add the following line to configuration file, nono.cfg.+
Create a configuration file nono.cfg in the VM directory, ~/nono/luna88k/, +with following contents. +By the way, to simplify the explanation, we assume there is no network here. +However, please configure the network if necessary.
-次に VM ディレクトリかその親ディレクトリに nono-ifup、nono-ifdown -というスクリプトを用意します。 -nono は tap(4) をオープンし、 -そのデバイス名を引数にこれらのスクリプトを呼びます。 --ethernet-hostdriver = tap +vmtype = luna88k +spc0-id6-image = hd,liveimage-luna88k-raw-20231016.img +hostnet-driver = none
Then, prepare two scripts named nono-ifup and nono-ifdown -in the VM directory or its parent directory. -nono will open tap(4) and -invoke these scripts with the name of the device as an argument.-
-例えば、NetBSD ホストで、ホストの wm0 セグメントに nono のゲスト OS を接続する場合、
-For example, if you want to connect guest OS to host's wm0 segment
-on NetBSD,
+
+
Run as nono -c ~/nono/luna88k. +(NVRAM.DAT will be created automatically in the VM directory)+
The emulated ROM Monitor will be executed. +Then, only for the first time, +entering the following can boot OpenBSD.+
+画面はこんな感じのはずです (太字が入力部分)。 ++nvram boot_filename boot⏎ +y +b⏎ +
You will see a screen like this. The bold text indicates +the characters you need to enter.+
+この内容は NVRAM.DAT に記録されているので次回以降は直接 OpenBSD が起動します。 ++NONO 0.7.0 Emulated ROM Monitor for LUNA-88K + +** NVRAM Initialized. + +N>nvram boot_filename boot⏎ +Update boot_filename : "vmunix" -> "boot" (Y/[N]):y +Updated +N>b⏎ +
The information you have just entered is recorded in the NVRAM, +so next time it will boot OpenBSD automatically.+ +
To quit, type “shutdown -p now” as the root user. +LUNA-88K can be powered off by software, +and nono will terminate when the VM is powered off.+ +
Try NetBSD/x68k
Tsutsui-san has provided a liveimage of NetBSD/x68k 10.0_BETA. +Let's try it.+
Create a directory somewhere for nono (for example ~/nono/), +and create subdirectories for individual VMs in it +(for example ~/nono/x68k/).+ +
Download your favorite one of plain-install or with-packages +from the following link, +extract it and place it in the VM directory, ~/nono/x68k/.+
+http://teokurebsd.org/netbsd/liveimage/20230111-x68k/ ++ +
Create a configuration file nono.cfg in the VM directory, ~/nono/x68k/, +with following contents. +By the way, to simplify the explanation, we assume there is no network here. +However, please configure the network if necessary.+
+ ++vmtype = x68030 +spc0-id0-image = hd,liveimage-x68k-with-packages-20230111.hds +hostnet0-driver = none +
Only the first time, run as nono -c ~/nono/x68k --create-sram. +This will create an initial SRAM.DAT in the VM directory.+ +
Again, run as nono -c ~/nono/x68k. +NetBSD/x68k will be booted from HDD. +Next time, it will boot NetBSD automatically.+ +
At the first boot, you will feel it's too heavy for several hours. +This is because the infamous makemandb(8) runs heavily in the background +for a looooong time. +It's very sad to me that an accident which is far from the ideal +is the first experiences of newcomers.+ +
After NetBSD boots up (more precisely, if powerd(8) is running), +you can shutdown and power off by +"Device > Operation > Push Power button" on menu, +and nono will terminate when the VM is powered off.+ +
Try installing NetBSD/virt68k
Here I will introduce how to install NetBSD/virt68k.+
Create a directory somewhere for nono (for example ~/nono/), +and create subdirectories for individual VMs in it +(for example ~/nono/virt68k/).+ +
Prepare an empty disk image file. +You can install it with 1GB at least, +but it would be safer if it was a little larger.+
+ ++dd if=/dev/zero of=virt68k.img bs=1m count=2048 +
Create a configuration file nono.cfg in the VM directory, ~/nono/virt68k/, +with following contents. +You may also need network configuration.+
+ ++vmtype = virt68k +virtio-block0-image = virt68k.img +hostcom-driver = stdio +hostnet-driver = auto +
There doesn't seem to be the official NetBSD/virt68k set available yet. +You have to build it manually from the source code. :(+ +
Run as the following:+
+ ++nono -c ~/nono/virt68k -f \ + -X <path>/release/virt68k/binary/kernel/netbsd-GENERIC.gz \ + --initrd <path>/release/virt68k/installation/ramdisks/inst-ramdisk.fs +
After a while, you will be asked about the root partition, etc., +so hit Enter key four times. +After a while again, the familiar installer will start.+
++[ 1.0000030] root device (default md0a): ⏎ +[ 1.0200030] dump device (default md0b): ⏎ +[ 1.0300030] file system (default ffs): ⏎ +[ 1.0400030] root on md0a dumps on md0b +[ 1.0600030] kern.module.path=/stand/virt68k/10.99.10/modules +[ 1.1200030] init path (default /sbin/init): ⏎ +[ 1.1400030] init: trying /sbin/init + : +
Example of host network setup
Add the following line to configuration file, nono.cfg. +(Although you don't need to write it since these are default behavior +on NetBSD)+
++hostnet-driver = tap +hostnet-tap-devpath = auto +
By default, /dev/tap is only accessible to privileged user. -You need to chmod /dev/tap (without unit number) appropriately.sysinst 等で OS をアップグレードするとパーミッションが 600 に戻るのがハマりポイントです。 +
By default, /dev/tap is only accessible to privileged user. +You need to chmod /dev/tap (without unit number) appropriately. +Note that upgrading using sysinst always resets the permission to 600.
Create a bridge(4) interface, and add your physical interface to the bridge.
-常用するなら設定ファイルに書いておきましょう。 -# ifconfig bridge0 create # brconfig bridge0 add wm0
If you want to use this all the time, +常用するなら /etc の設定ファイルに書いておきましょう。 +If you use it regularly, you can put configuration file into /etc./etc/ifconfig.bridge0 @@ -557,9 +2522,13 @@ up 一般ユーザに戻って、 VM ディレクトリかその親ディレクトリに 次のような 2つのスクリプトを用意します。 +nono は tap(4) をオープンし、 +そのデバイス名を引数にこれらのスクリプトを呼びます。 sudo の設定は別途行ってください。Return to non-privileged user, and create following two scripts in the VM directory or its parent directory. +nono will open tap(4) and +invoke these scripts with the name of the device as an argument. In addition, you need to set up sudo separately.nono-ifup @@ -583,57 +2552,125 @@ sudo /sbin/ifconfig $1 down- nono を起動し、 メニューの「モニタ > ホスト > ホストネットワーク」を開いて -NetDriver が None 以外 (この場合 BSD tap) になっていれば動いてるはずです。 +HostNet Driver: tap になっていれば動いてるはずです。
Run nono, and open "Monitor > Host > Host Network" window from menu. -It's OK if you can see "NetDriver: BSD tap" (in this case).+It's OK if you can see "HostNet Driver: tap".
Known Issues
In debugger console, some special characters like cursor keys +aren't printed correctly.+(since ver 0.3.0) +
If the host OS is running on VirtualBox (on Windows?) and +"Mouse integration" on VirtualBox is enabled, +the mouse pointer will not move as expected in nono's Mouse Mode.+(2021/12/30) + +
On Wayland, window size may be incorrect. +This may be due to wxWidgets (3.0.5) bug.+(2021/12/30) + +
Changes
How to migrate from old versions
Some versions may have incompatibilities in the configuration files, etc. +In such case, you may need to upgrade it by referring the following link.+ +
Changes
License
Contact, License, etc
License
See nono-license.txt about nono itself.+
nono uses X68030 IPLROM image distributed without charge. +You must read +the license agreement +(even though it's Japanese original text only).+
nono modifies and embeds the font distributed as SIL Open Font License version 1.1.+
Contact us
Contact us
If you find any problems, please let me know. You may write in English.
About contributes
About contributes
If you provide a patch to nono, you must agree to the following conditions: -+
If you provide a patch to nono, we assume that you agree the following +conditions:
All your work are operated or distributed under the nono license.+
All your work will be operated or distributed under the nono license.
The license may be changed in the future.
Do not exercise your author's rights.
nono uses source code with the following advertising clause.
@@ -641,7 +2678,8 @@ This product includes software developed This product includes software developed by the University of California, Lawrence Berkeley Laboratory.