--- nono/vm/mpu680x0.cpp 2026/04/29 17:05:09 1.1.1.13 +++ nono/vm/mpu680x0.cpp 2026/04/29 17:05:17 1.1.1.15 @@ -11,28 +11,32 @@ #include "mpu680x0.h" #include "config.h" #include "debugger.h" -#include "debugger_private.h" -#include "m68030bus.h" -#include "m68030excep.h" +#include "interrupt.h" #include "mainapp.h" #include "scheduler.h" -#include "sync.h" +#include "syncer.h" #include "uimessage.h" +#include "vectortable.h" #include "vm.h" #include -static void mpu680x0_reset_inst(void *); -static void mpu680x0_halt(void *); +static Syncer *gSyncer; // コンストラクタ MPU680x0Device::MPU680x0Device() - : inherited("MPU(68030)") + : inherited() { - cpu = m68030_init(this); + SetName("MPU(68030)"); + + // MMU.xRP.DT == 0 になってはいけない(MMU 構成例外)。 + SetSRP(0x00000001, 0); + SetCRP(0x00000001, 0); + // FPU + fpu_init(); // 割り込みイベントコールバック設定 intr_event.func = ToEventCallback(&MPU680x0Device::InterruptCallback); - intr_event.Regist("MPU Interrupt"); + intr_event.Regist(GetName() + " Interrupt"); // レジスタモニター reg_monitor.func = ToMonitorCallback(&MPU680x0Device::MonitorUpdateReg); @@ -56,14 +60,19 @@ MPU680x0Device::~MPU680x0Device() { } +// 初期化 bool MPU680x0Device::Init() { - // 親クラス if (inherited::Init() == false) { return false; } + debugger = GetDebugger(); + interruptdev = GetInterruptDevice(); + // static 関数から参照するため。うーん…。 + gSyncer = syncer; + // 割り込み時のディレイ。 // // 外部デバイスが 68030 の IPL0-2 をアサートしてから、68030 がそれを @@ -75,23 +84,24 @@ MPU680x0Device::Init() intr_event.time = 3 * clock_nsec; // FPU (6888x) - if (gMainApp.GetVMType() == VMTYPE_LUNA1) { - // LUNA は 68881 固定 (設定は見ない) - cpu->has_fpu = 1; - } else { + if (gMainApp.IsX68030()) { // X68k は設定による - const ConfigItem& item = gConfig->Find("mpu-has-fpu"); - cpu->has_fpu = item.AsInt(); - if (cpu->has_fpu < 0 || cpu->has_fpu > 2) { + const ConfigItem& item = gConfig->Find("fpu-type"); + std::string type = item.AsString(); + if (type == "none" || type == "0") { + has_fpu = 0; + } else if (type == "68881" || type == "1") { + has_fpu = 1; + } else { item.Err(); return false; } + } else { + // LUNA は 68881 固定 (設定は見ない) + has_fpu = 1; } - cpu->resetop_callback = mpu680x0_reset_inst; - cpu->resetop_arg = NULL; - cpu->halt_callback = mpu680x0_halt; - cpu->halt_arg = this; + vectortable = GetVectorTable(); return true; } @@ -101,21 +111,38 @@ void MPU680x0Device::ResetHard(bool poweron) { if (poweron) { - m68030_power_on(cpu); + // サイクルを初期化。 + used_cycle = 0; + + // 履歴を初期化。電源(再)投入時のみ行う。 + exhist.Clear(); + brhist.Clear(); + + for (int i = 0; i < 16; i++) { + reg.R[i] = 0xcccccccc; + } + // XXX ただし X68030 IPLROM には A6 を初期化せずに書き込んでいるバグが + // あるため、A6 を概ね RAM のあるあたりに指定しておく…。 + reg.A[6] = 0x000ccccc; + + // この後起きるリセット例外で PC を初期化する前に参照することになるので + // これだけここでも初期化しておく。 + reg.pc = 0; } + resetting = true; // リセット例外を 520 クロック後に起こす。 // 520 は、電源オン時、Vcc が最小動作規定値に達してから最低 520 クロック // の間アサートしなければならないという値であって、実際これだけかかる // とかいう値ではない。が、こちら側の都合で、この後実行される RAM の - // ResetHard() がブートページを用意した後で m68030_exception_reset() で + // ResetHard() がブートページを用意した後で ExceptionReset() で // SP, PC をフェッチするという順序にしないといけないため、リセット例外が // 起動するまでに時間がかかるというところを都合よく真似ておく。 exec_event.func = ToEventCallback(&MPU680x0Device::ResetCallback); exec_event.time = 520 * clock_nsec; - exec_event.SetName("MPU Reset"); - gScheduler->RestartEvent(exec_event); + exec_event.SetName(GetName() + " Reset"); + scheduler->RestartEvent(exec_event); } // リセット例外コールバック。 @@ -123,63 +150,66 @@ MPU680x0Device::ResetHard(bool poweron) void MPU680x0Device::ResetCallback(Event& ev) { + resetting = false; intr_pending = false; // リセット例外を実行 - int cycle = m68030_exception_reset(cpu); + int cycle = ExceptionReset(); // コールバックを ResetCallback から Exec* に差し替える前のここで // トレース状態を初期化する。 - SetTrace(gDebugger->IsTrace()); + SetTrace(debugger->IsTrace()); // 以降は通常走行。 - if (cpu->state == m68kcpu::CPU_STATE_NORMAL) { + if (cpu_state == CPU_STATE_NORMAL) { exec_event.func = exec_short; exec_event.time = cycle * clock_nsec; - exec_event.SetName("MPU Execute"); - gScheduler->StartEvent(exec_event); + exec_event.SetName(GetName() + " Execute"); + scheduler->RestartEvent(exec_event); } else { // リセット例外でダブルバスフォールトならここで停止。 } } -// 通常の1命令実行のコールバック -// 割り込みチェックなどを省いたショート版。 -void -MPU680x0Device::ExecShort(Event& ev) -{ - int cycle = m68030_exec(cpu); - - ev.time = cycle * clock_nsec; - gScheduler->StartEvent(ev); -} - -// 割り込みチェック、STOP 処理を含んだ完全な実行サイクルのコールバック。 +// 割り込みチェック、STOP/HALT 処理を含んだ完全な実行サイクルのコールバック。 // SR の I2:I0 が変わった直後などに呼ばれる。 // ここでは割り込みをチェックし、必要なら割り込み処理を起動、 // そうでなければ通常の命令実行を行う。 void MPU680x0Device::ExecFull(Event& ev) { + if (cpu_state == CPU_STATE_HALT) { + // HALT なら停止。 + return; + } + + // マスクよりも割り込みレベルのほうが高ければ割り込み処理。 + // この時点で intr_pending が true の可能性もあることに留意。 + // 割り込みレベルは変化してないので Level 7 の特別処理は不要 + // (割り込みレベルの変化はここではなく InterruptCallback() で処理)。 + if (intr_level > reg.intr_mask) { + intr_pending = true; + } + if (intr_pending) { // 割り込み処理を起動。 intr_pending = false; // 前の命令実行後となるここで割り込みを起動 - int cycle = m68030_exception_interrupt(cpu); + int cycle = ExceptionInterrupt(); ev.time = cycle * clock_nsec; - gScheduler->StartEvent(ev); + scheduler->StartEvent(ev); } else { - if (cpu->state == m68kcpu::CPU_STATE_NORMAL) { + if (cpu_state == CPU_STATE_NORMAL) { // コールバックを通常処理に戻してから... exec_event.func = exec_short; // この場で次の命令を実行。 ExecShort(ev); } else { - // STOP ならここで停止。HALT はそもそも来ないはず。 + // STOP ならここで停止。 } } } @@ -188,7 +218,7 @@ MPU680x0Device::ExecFull(Event& ev) void MPU680x0Device::ExecTrace(Event& ev) { - gDebugger->Exec(); + debugger->ExecMain(); ExecFull(ev); } @@ -208,7 +238,7 @@ MPU680x0Device::SetTrace(bool enable) // STOP 命令中にオンにするには、停止しているイベントを起こす。 // STOP 命令中にオフにする場合は、何もしなくていい。 if (enable && exec_event.IsRunning() == false) { - gScheduler->StartEvent(exec_event); + scheduler->StartEvent(exec_event); } } @@ -220,42 +250,57 @@ MPU680x0Device::Interrupt(int level) intr_event.code = level; if (intr_event.IsRunning() == false) { - gScheduler->StartEvent(intr_event); + scheduler->StartEvent(intr_event); } } // 外部割り込みイベントコールバック。 -// 割り込みレベルが変わったことをコアに通知する。 // ev.code 0-7 は新しい割り込みレベル。 +// +// 割り込みは本来命令境界ごとにチェックするが、実際に割り込みが起きうるのは +// 1) 割り込み信号線が変化した時 +// 2) 割り込みマスクを変更した時 +// しかないはずなので、この時だけ命令境界でチェックする。 +// ここはその 1) のほう。その2のほうは core.cpp:SetSR() 参照。 +// +// 外部割り込みが来たので、レベル比較などをして、必要なら次の命令境界で +// 割り込みチェックを行うようにするところ。 void MPU680x0Device::InterruptCallback(Event& ev) { int level = ev.code; + int mask = reg.intr_mask; - if (m68030_interrupt(cpu, level)) { + // 信号線が 2 クロック期間安定していること云々は省略 + + // ホールトなら何もしない + if (cpu_state == CPU_STATE_HALT) { + return; + } + + // 割り込みを起こすかどうかに関わらずここで更新 + intr_level = level; + + // 割り込み例外を起動するのは + // o レベルがマスクより高い + // o マスクに関係なく、レベルが下位から 7 に変化した場合 + // (ここは変化した時だけ呼ばれるのと 7 より上はないので + // level==7 なら必ず「下位から 7 に変化」のはず) + if (level > mask || level == 7) { // 通知した結果割り込みが受け付けられたので、 // この命令終了時のコールバックを割り込み処理起動に差し替える。 MakeNextFull(); intr_pending = true; // STOP 状態だったらここでイベントを開始する - if (cpu->state == m68kcpu::CPU_STATE_STOP) { + if (cpu_state == CPU_STATE_STOP) { // STOP から抜ける時間? exec_event.time = 1 * clock_nsec; - gScheduler->StartEvent(exec_event); + scheduler->StartEvent(exec_event); } } } -// 次の命令境界で割り込みチェックを行う。 -// (割り込みマスクを変更する命令の実行で呼ばれる) -void -MPU680x0Device::CheckIntr() -{ - MakeNextFull(); - intr_pending |= m68030_check_interrupt(cpu); -} - // 次の命令境界は Full にする。 void MPU680x0Device::MakeNextFull() @@ -263,57 +308,56 @@ MPU680x0Device::MakeNextFull() exec_event.func = exec_full; } -// コアからの動作変更通知 -/*static*/ void -MPU680x0Device::NotifyCPUMode(uint32 new_mode) +void +MPU680x0Device::ChangeState(uint32 new_state) { - // new_mode (m68kcpu::CPU_STATE_*) と - // RequestCPUMode() の引数 Sync::SCHED_CPU_* は + // new_mode (CPU_STATE_*) と + // RequestCPUMode() の引数 Syncer::SCHED_CPU_* は // 実は同じ値なのでそのまま渡してよいことにする。 - static_assert(m68kcpu::CPU_STATE_NORMAL == Sync::SCHED_CPU_NORMAL, ""); - static_assert(m68kcpu::CPU_STATE_STOP == Sync::SCHED_CPU_STOP, ""); - static_assert(m68kcpu::CPU_STATE_HALT == Sync::SCHED_CPU_HALT, ""); - - // 通知 (同期のため) - gSync->RequestCPUMode(new_mode); + static_assert(CPU_STATE_NORMAL == Syncer::SCHED_CPU_NORMAL, ""); + static_assert(CPU_STATE_STOP == Syncer::SCHED_CPU_STOP, ""); + static_assert(CPU_STATE_HALT == Syncer::SCHED_CPU_HALT, ""); + + if (cpu_state != new_state) { + cpu_state = new_state; + // スケジューラに通知 + syncer->RequestCPUMode(cpu_state); + } } // A-Line 命令エミュレーションのコールバックを指定。 void -MPU680x0Device::SetALineCallback(bool (*callback)(m68kcpu *, void*), void *arg) +MPU680x0Device::SetALineCallback(bool (*callback)(MPU680x0Device *, void*), + void *arg) { - cpu->aline_callback = callback; - cpu->aline_arg = arg; + aline_callback = callback; + aline_arg = arg; } // F-Line 命令エミュレーションのコールバックを指定。 void -MPU680x0Device::SetFLineCallback(bool (*callback)(m68kcpu *, void*), void *arg) +MPU680x0Device::SetFLineCallback(bool (*callback)(MPU680x0Device *, void*), + void *arg) { - cpu->fline_callback = callback; - cpu->fline_arg = arg; + fline_callback = callback; + fline_arg = arg; } -// RESET 命令の CPU からのコールバック関数 -static void -mpu680x0_reset_inst(void *arg) +// RESET 命令 +void +MPU680x0Device::ops_reset() { gVM->ResetByMPU(); } -// ホールト時の CPU からのコールバック関数 -static void -mpu680x0_halt(void *arg) -{ - ((MPU680x0Device *)arg)->Halt(); -} - // ホールト状態 void MPU680x0Device::Halt() { - // 動作停止 - gScheduler->StopEvent(exec_event); + ChangeState(CPU_STATE_HALT); + + // この命令完了後に停止するため exec を差し替える。 + MakeNextFull(); // UI に通知 (メッセージボックス表示とか) UIMessage::Post(UIMessage::HALT); @@ -324,7 +368,7 @@ uint64 MPU680x0Device::Read8(uint32 addr) { try { - return m68030_read_8(cpu, addr); + return read_8(addr); } catch (...) { return (uint64)-1; } @@ -334,7 +378,7 @@ uint64 MPU680x0Device::Read16(uint32 addr) { try { - return m68030_read_16(cpu, addr); + return read_16(addr); } catch (...) { return (uint64)-1; } @@ -344,7 +388,7 @@ uint64 MPU680x0Device::Read32(uint32 addr) { try { - return m68030_read_32(cpu, addr); + return read_32(addr); } catch (...) { return (uint64)-1; } @@ -354,7 +398,7 @@ uint64 MPU680x0Device::Write8(uint32 addr, uint32 data) { try { - m68030_write_8(cpu, addr, data); + write_8(addr, data); return 0; } catch (...) { return (uint64)-1; @@ -365,7 +409,7 @@ uint64 MPU680x0Device::Write16(uint32 addr, uint32 data) { try { - m68030_write_16(cpu, addr, data); + write_16(addr, data); return 0; } catch (...) { return (uint64)-1; @@ -376,7 +420,7 @@ uint64 MPU680x0Device::Write32(uint32 addr, uint32 data) { try { - m68030_write_32(cpu, addr, data); + write_32(addr, data); return 0; } catch (...) { return (uint64)-1; @@ -387,9 +431,9 @@ MPU680x0Device::Write32(uint32 addr, uin void MPU680x0Device::MonitorUpdateReg(Monitor *, TextScreen& screen) { - m68kreg reg; - uint32 ppc; - uint32 state; + m68kreg tmp; + uint32 tmp_ppc; + uint32 tmp_state; int x; int y; @@ -397,47 +441,47 @@ MPU680x0Device::MonitorUpdateReg(Monitor // ローカルにコピー // ただし一部は reg ではなく cpu クラス本体にある - reg = cpu->reg; - ppc = cpu->ppc; - state = cpu->state; + tmp = reg; + tmp_ppc = ppc; + tmp_state = cpu_state; // データレジスタ、アドレスレジスタ for (int i = 0; i < 4; i++) { screen.Print(0, i, "D%d:%08x D%d:%08x A%d:%08x A%d:%08x", - i + 0, reg.da[i], - i + 4, reg.da[i + 4], - i + 0, reg.da[i + 8], - i + 4, reg.da[i + 12]); + i + 0, tmp.R[i], + i + 4, tmp.R[i + 4], + i + 0, tmp.R[i + 8], + i + 4, tmp.R[i + 12]); } // 5列目 x = 50; // SR screen.Print(x, 0, "SR:%04x(%c%c%c%c%c)", - (reg.sr_h() | reg.ccr.Get()), - (reg.ccr.IsX()) ? 'X' : '-', - (reg.ccr.IsN()) ? 'N' : '-', - (reg.ccr.IsZ()) ? 'Z' : '-', - (reg.ccr.IsV()) ? 'V' : '-', - (reg.ccr.IsC()) ? 'C' : '-'); + tmp.GetSR(), + (tmp.ccr.IsX()) ? 'X' : '-', + (tmp.ccr.IsN()) ? 'N' : '-', + (tmp.ccr.IsZ()) ? 'Z' : '-', + (tmp.ccr.IsV()) ? 'V' : '-', + (tmp.ccr.IsC()) ? 'C' : '-'); // VBR - screen.Print(x, 1, "VBR:%08x", reg.vbr); + screen.Print(x, 1, "VBR:%08x", tmp.vbr); // *SP - uint ms = (reg.s ? 2 : 0) | (reg.m ? 1 : 0); // T1 T0 S M + uint ms = (tmp.s ? 2 : 0) | (tmp.m ? 1 : 0); // T1 T0 S M if (ms == 3) { // Supervisor (Master) mode (A7=MSP, USP/ISP) - screen.Print(x, 2, TA::Disable, "USP:%08x", reg.usp); - screen.Print(x, 3, TA::Disable, "ISP:%08x", reg.isp); + screen.Print(x, 2, TA::Disable, "USP:%08x", tmp.usp); + screen.Print(x, 3, TA::Disable, "ISP:%08x", tmp.isp); } else if (ms == 2) { // Supervisor (Interrupt) mode (A7=ISP, USP/MSP) - screen.Print(x, 2, TA::Disable, "USP:%08x", reg.usp); - screen.Print(x, 3, TA::Disable, "MSP:%08x", reg.msp); + screen.Print(x, 2, TA::Disable, "USP:%08x", tmp.usp); + screen.Print(x, 3, TA::Disable, "MSP:%08x", tmp.msp); } else { // User mode (A7=USP, ISP/MSP) - screen.Print(x, 2, TA::Disable, "ISP:%08x", reg.isp); - screen.Print(x, 3, TA::Disable, "MSP:%08x", reg.msp); + screen.Print(x, 2, TA::Disable, "ISP:%08x", tmp.isp); + screen.Print(x, 3, TA::Disable, "MSP:%08x", tmp.msp); } // 6列目 @@ -446,35 +490,36 @@ MPU680x0Device::MonitorUpdateReg(Monitor // CACR:01234567 // CAAR:01234567 x = 66; - screen.Print(x, 0, "PC: %08x", ppc); - screen.Print(x, 1, "SFC:%d DFC:%d", reg.sfc, reg.dfc); - screen.Print(x, 2, "CACR:%08x", reg.cacr); - screen.Print(x, 3, "CAAR:%08x", reg.caar); + screen.Print(x, 0, "PC: %08x", tmp_ppc); + screen.Print(x, 1, "SFC:%d DFC:%d", tmp.sfc, tmp.dfc); + screen.Print(x, 2, "CACR:%08x", tmp.cacr); + screen.Print(x, 3, "CAAR:%08x", tmp.caar); // XXX どこに置くのがいいか - switch (state) { - case m68kcpu::CPU_STATE_NORMAL: + switch (tmp_state) { + case CPU_STATE_NORMAL: screen.Puts(25, 4, "State: Running"); break; - case m68kcpu::CPU_STATE_STOP: + case CPU_STATE_STOP: screen.Puts(25, 4, "State: STOP instruction"); break; - case m68kcpu::CPU_STATE_HALT: + case CPU_STATE_HALT: screen.Puts(25, 4, TA::On, "State: Double Bus Fault"); break; default: - __unreachable(); + screen.Print(25, 4, TA::On, "corrupted cpu_state=%d", tmp_state); + break; } // MMU x = 0; y = 4; screen.Puts(x, y++, ""); - screen.Print(x, y, "SRP:%08x_%08x", reg.srp.h, reg.srp.l); - screen.Print(x, y + 1, "CRP:%08x_%08x", reg.crp.h, reg.crp.l); + screen.Print(x, y, "SRP:%08x_%08x", tmp.srp.h, tmp.srp.l); + screen.Print(x, y + 1, "CRP:%08x_%08x", tmp.crp.h, tmp.crp.l); x += 23; for (int i = 0; i < 2; i++) { - uint32 tt = reg.tt[i]; + uint32 tt = tmp.tt[i]; screen.Print(x, y + i, "TT%d:%08x(%c%c%c)", i, tt, (tt & m68030TT::E) ? 'E' : '-', @@ -483,20 +528,24 @@ MPU680x0Device::MonitorUpdateReg(Monitor } x += 19; screen.Print(x, y, "TC:%08x(%c%c%c)", - reg.tc, - (reg.tc & m68030TC::TC_E) ? 'E' : '-', - (reg.tc & m68030TC::TC_SRE) ? 'S' : '-', - (reg.tc & m68030TC::TC_FCL) ? 'F' : '-'); - screen.Print(x, y + 1, "MMUSR: %04x(%c%c%c%c%c%c%c N=%d)", - reg.mmusr, - (reg.mmusr & m68030MMUSR::B) ? 'B' : '-', - (reg.mmusr & m68030MMUSR::L) ? 'L' : '-', - (reg.mmusr & m68030MMUSR::S) ? 'S' : '-', - (reg.mmusr & m68030MMUSR::W) ? 'W' : '-', - (reg.mmusr & m68030MMUSR::I) ? 'I' : '-', - (reg.mmusr & m68030MMUSR::M) ? 'M' : '-', - (reg.mmusr & m68030MMUSR::T) ? 'T' : '-', - (reg.mmusr & m68030MMUSR::N)); + tmp.tc, + (tmp.tc & m68030TC::TC_E) ? 'E' : '-', + (tmp.tc & m68030TC::TC_SRE) ? 'S' : '-', + (tmp.tc & m68030TC::TC_FCL) ? 'F' : '-'); + y++; + screen.Print(x, y, "MMUSR: %04x(", tmp.mmusr); + x += 12; + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::B) | 'B'); + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::L) | 'L'); + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::S) | 'S'); + screen.Putc(x++, y, '-'); + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::W) | 'W'); + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::I) | 'I'); + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::M) | 'M'); + screen.Puts(x, y, "- -"); + x += 3; + screen.Putc(x++, y, TA::OnOff(tmp.mmusr & m68030MMUSR::T) | 'T'); + screen.Print(x, y, "---N=%d)", tmp.mmusr & m68030MMUSR::N); // FPU x = 0; @@ -505,9 +554,9 @@ MPU680x0Device::MonitorUpdateReg(Monitor for (int i = 0; i < 8; i++) { screen.Print(x, y + i, "FP%d:%04x_%08x_%08x (%-20s)", i, - reg.fpframe.fpf_regs[i * 3 + 0] >> 16, - reg.fpframe.fpf_regs[i * 3 + 1], - reg.fpframe.fpf_regs[i * 3 + 2], + tmp.fpframe.fpf_regs[i * 3 + 0] >> 16, + tmp.fpframe.fpf_regs[i * 3 + 1], + tmp.fpframe.fpf_regs[i * 3 + 2], "not yet"); } @@ -520,7 +569,7 @@ MPU680x0Device::MonitorUpdateReg(Monitor ".DBL", ".???", }; - uint32 fpcr = reg.fpframe.fpf_fpcr; + uint32 fpcr = tmp.fpframe.fpf_fpcr; screen.Print(x, y++, "FPCR:%04x", fpcr); screen.Puts(x + 2, y, TA::OnOff(fpcr & 0x8000), "BS"); screen.Puts(x + 5, y, TA::OnOff(fpcr & 0x4000), "SN"); @@ -536,7 +585,7 @@ MPU680x0Device::MonitorUpdateReg(Monitor rmstr[(fpcr >> 4) & 3]); // FPSR - uint32 fpsr = reg.fpframe.fpf_fpsr; + uint32 fpsr = tmp.fpframe.fpf_fpsr; uint32 cc = fpsr >> 24; screen.Print(x, y++, "FPSR:%08x", fpsr); screen.Puts(x + 2, y, TA::OnOff(cc & 0x08), "N"); @@ -562,7 +611,7 @@ MPU680x0Device::MonitorUpdateReg(Monitor y++; // FPIAR - screen.Print(x, y++, "FPIAR:%08x", reg.fpframe.fpf_fpiar); + screen.Print(x, y++, "FPIAR:%08x", tmp.fpframe.fpf_fpiar); } // モニター更新 (ATC) @@ -595,7 +644,7 @@ MPU680x0Device::MonitorUpdateATC(Monitor double r; int i; - table = &cpu->atc.tables[fc]; + table = &atc.tables[fc]; screen.Print(x, 0, "FC=%d %s", fc, name); screen.Puts(x, 1, "LAddr PAddr Flag Hit% Age"); // 先に統計用の母数を計算 @@ -651,7 +700,7 @@ MPU680x0Device::MonitorUpdateATC(Monitor m68030ATCLine *a; int i; - table = &cpu->atc.tables[0]; + table = &atc.tables[0]; screen.Clear(); screen.Puts(0, 0, "No. FC LAddr PAddr Flag");