Return to filesharing.howto.txt CVS log

Up to [Previous NeXT emulator] / previous

Annotation of previous/filesharing.howto.txt, revision 1.1.1.2

1.1       root        1: NOTE: This procedure has been tested using NeXTstep 1.0a and 3.3
                      2:       as client and Mac OS X v10.9 as server.
                      3: 
1.1.1.2 ! root        4:       This procedure is only valid when using SLiRP as networking
        !             5:       interface.
        !             6: 
1.1       root        7:       For this procedure to work networking must be setup first
                      8:       (see networking.howto.txt for details).
                      9:       To edit files inside /etc you need super user privileges.
                     10: 
                     11:       X.X.X.X = Your host system's IP-Address (e.g. 192.168.0.1)
                     12:       serverhostname = Your host system's hostname
                     13:       clienthostname = Your NeXTstep hostname (see networking.howto)
                     14: 
                     15: 
                     16: Howto: Setup NFS file sharing under Mac OS X:
                     17: 
                     18: 1. Create the folder you want to share and change permissions using
                     19:    this command from the command line:
                     20:    chmod 777 /Path/To/Shared/Folder
                     21: 
                     22: 2. Add the folder you want to share to /etc/exports by adding this
                     23:    line to the end of the file:
                     24:    /Path/To/Shared/Folder -maproot=nobody
                     25: 
                     26: 3. Load the edited file using these commands from the command line:
                     27:    sudo nfsd checkexports
                     28:    sudo nfsd enable
                     29:    sudo nfsd stop
                     30:    sudo nfsd -N
                     31: 
                     32: 4. You can confirm that the operation was successful using this 
                     33:    command:
                     34:    showmount -e
                     35: 
                     36: NOTE: Step 3 needs to be repeated after every reboot of the host
                     37:       system because nfsd -N is not permanent.
                     38: 
                     39: 
                     40: Howto: Setup NFS file sharing under NeXTstep 3.3:
                     41: 
                     42: 1. Edit the file "/etc/hosts" by adding your host system to 
                     43:    the last line of the file (host system IP-Address followed 
                     44:    by hostname of file server):
                     45:    10.0.2.15   clienthostname
                     46:    X.X.X.X     serverhostname
                     47: 
                     48: 2. Edit the file "/etc/fstab" by adding the shared filesystem.
                     49:    Add this line at the end of the file: 
                     50:    serverhostname:/Path/To/Shared/Folder /Net nfs rw,net 0 0
                     51: 
                     52: 3. Load the edited files using these commands from the command
                     53:    line:
                     54:    su
                     55:    niload hosts / < /etc/hosts
                     56:    niload fstab / < /etc/fstab
                     57: 
                     58: 4. Reboot. The shared folder should be accessible from /Net
                     59:    directory. You can confirm that the operation was successful
                     60:    using this command:
                     61:    /usr/etc/showmount -e serverhostname
                     62: 
                     63: 
                     64: Howto: Open the above files using root privileges (NeXTstep 3.3):
                     65:    a  Open the /etc directory with this command in Terminal:
                     66:       "open /etc"
                     67:    b  Select the file to open and from Workspace select 
                     68:       Services > Open Sesame > Open As Root.

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.