Annotation of qemu/Makefile.objs, revision 1.1.1.4

1.1       root        1: #######################################################################
                      2: # QObject
                      3: qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
                      4: qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
1.1.1.4 ! root        5: qobject-obj-y += qerror.o error.o qemu-error.o
1.1       root        6: 
                      7: #######################################################################
1.1.1.2   root        8: # oslib-obj-y is code depending on the OS (win32 vs posix)
                      9: oslib-obj-y = osdep.o
1.1.1.3   root       10: oslib-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o
                     11: oslib-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o
1.1.1.2   root       12: 
                     13: #######################################################################
1.1.1.4 ! root       14: # coroutines
        !            15: coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o
        !            16: ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
        !            17: coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o
        !            18: else
        !            19: coroutine-obj-$(CONFIG_POSIX) += coroutine-gthread.o
        !            20: endif
        !            21: coroutine-obj-$(CONFIG_WIN32) += coroutine-win32.o
        !            22: 
        !            23: #######################################################################
1.1       root       24: # block-obj-y is code used by both qemu system emulation and qemu-img
                     25: 
1.1.1.4 ! root       26: block-obj-y = cutils.o cache-utils.o qemu-option.o module.o async.o
1.1.1.3   root       27: block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o qemu-progress.o qemu-sockets.o
1.1.1.4 ! root       28: block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y)
1.1       root       29: block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
                     30: block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
                     31: 
                     32: block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
1.1.1.2   root       33: block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
                     34: block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
                     35: block-nested-y += qed-check.o
                     36: block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
1.1       root       37: block-nested-$(CONFIG_WIN32) += raw-win32.o
                     38: block-nested-$(CONFIG_POSIX) += raw-posix.o
1.1.1.4 ! root       39: block-nested-$(CONFIG_LIBISCSI) += iscsi.o
1.1       root       40: block-nested-$(CONFIG_CURL) += curl.o
1.1.1.2   root       41: block-nested-$(CONFIG_RBD) += rbd.o
1.1       root       42: 
                     43: block-obj-y +=  $(addprefix block/, $(block-nested-y))
                     44: 
                     45: net-obj-y = net.o
                     46: net-nested-y = queue.o checksum.o util.o
                     47: net-nested-y += socket.o
                     48: net-nested-y += dump.o
                     49: net-nested-$(CONFIG_POSIX) += tap.o
                     50: net-nested-$(CONFIG_LINUX) += tap-linux.o
                     51: net-nested-$(CONFIG_WIN32) += tap-win32.o
                     52: net-nested-$(CONFIG_BSD) += tap-bsd.o
                     53: net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
                     54: net-nested-$(CONFIG_AIX) += tap-aix.o
1.1.1.2   root       55: net-nested-$(CONFIG_HAIKU) += tap-haiku.o
1.1       root       56: net-nested-$(CONFIG_SLIRP) += slirp.o
                     57: net-nested-$(CONFIG_VDE) += vde.o
                     58: net-obj-y += $(addprefix net/, $(net-nested-y))
                     59: 
1.1.1.3   root       60: ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
1.1.1.2   root       61: # Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
                     62: # only pull in the actual virtio-9p device if we also enabled virtio.
                     63: CONFIG_REALLY_VIRTFS=y
1.1.1.3   root       64: fsdev-nested-y = qemu-fsdev.o
                     65: else
                     66: fsdev-nested-y = qemu-fsdev-dummy.o
1.1.1.2   root       67: endif
1.1       root       68: fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
                     69: 
                     70: ######################################################################
                     71: # libqemu_common.a: Target independent part of system emulation. The
                     72: # long term path is to suppress *all* target specific code in case of
                     73: # system emulation, i.e. a single QEMU executable should support all
                     74: # CPUs and machines.
                     75: 
                     76: common-obj-y = $(block-obj-y) blockdev.o
                     77: common-obj-y += $(net-obj-y)
                     78: common-obj-y += $(qobject-obj-y)
                     79: common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
1.1.1.4 ! root       80: common-obj-y += readline.o console.o cursor.o
1.1.1.2   root       81: common-obj-y += $(oslib-obj-y)
1.1       root       82: common-obj-$(CONFIG_WIN32) += os-win32.o
                     83: common-obj-$(CONFIG_POSIX) += os-posix.o
                     84: 
1.1.1.4 ! root       85: common-obj-y += tcg-runtime.o host-utils.o main-loop.o
        !            86: common-obj-y += irq.o input.o
1.1       root       87: common-obj-$(CONFIG_PTIMER) += ptimer.o
                     88: common-obj-$(CONFIG_MAX7310) += max7310.o
                     89: common-obj-$(CONFIG_WM8750) += wm8750.o
                     90: common-obj-$(CONFIG_TWL92230) += twl92230.o
                     91: common-obj-$(CONFIG_TSC2005) += tsc2005.o
                     92: common-obj-$(CONFIG_LM832X) += lm832x.o
                     93: common-obj-$(CONFIG_TMP105) += tmp105.o
                     94: common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
                     95: common-obj-$(CONFIG_SSD0303) += ssd0303.o
                     96: common-obj-$(CONFIG_SSD0323) += ssd0323.o
                     97: common-obj-$(CONFIG_ADS7846) += ads7846.o
                     98: common-obj-$(CONFIG_MAX111X) += max111x.o
                     99: common-obj-$(CONFIG_DS1338) += ds1338.o
                    100: common-obj-y += i2c.o smbus.o smbus_eeprom.o
                    101: common-obj-y += eeprom93xx.o
                    102: common-obj-y += scsi-disk.o cdrom.o
                    103: common-obj-y += scsi-generic.o scsi-bus.o
1.1.1.4 ! root      104: common-obj-y += hid.o
1.1       root      105: common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
1.1.1.2   root      106: common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o
1.1       root      107: common-obj-$(CONFIG_SSI) += ssi.o
                    108: common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
                    109: common-obj-$(CONFIG_SD) += sd.o
                    110: common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
                    111: common-obj-y += bt-hci-csr.o
1.1.1.3   root      112: common-obj-y += buffered_file.o migration.o migration-tcp.o
1.1       root      113: common-obj-y += qemu-char.o savevm.o #aio.o
                    114: common-obj-y += msmouse.o ps2.o
                    115: common-obj-y += qdev.o qdev-properties.o
1.1.1.3   root      116: common-obj-y += block-migration.o iohandler.o
1.1.1.2   root      117: common-obj-y += pflib.o
1.1.1.3   root      118: common-obj-y += bitmap.o bitops.o
1.1       root      119: 
                    120: common-obj-$(CONFIG_BRLAPI) += baum.o
                    121: common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
1.1.1.2   root      122: common-obj-$(CONFIG_WIN32) += version.o
                    123: 
                    124: common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o
1.1       root      125: 
                    126: audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
                    127: audio-obj-$(CONFIG_SDL) += sdlaudio.o
                    128: audio-obj-$(CONFIG_OSS) += ossaudio.o
1.1.1.2   root      129: audio-obj-$(CONFIG_SPICE) += spiceaudio.o
1.1       root      130: audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
                    131: audio-obj-$(CONFIG_ALSA) += alsaaudio.o
                    132: audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
                    133: audio-obj-$(CONFIG_FMOD) += fmodaudio.o
                    134: audio-obj-$(CONFIG_ESD) += esdaudio.o
                    135: audio-obj-$(CONFIG_PA) += paaudio.o
                    136: audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
                    137: audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
                    138: audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
                    139: audio-obj-y += wavcapture.o
                    140: common-obj-y += $(addprefix audio/, $(audio-obj-y))
                    141: 
                    142: ui-obj-y += keymaps.o
                    143: ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
                    144: ui-obj-$(CONFIG_COCOA) += cocoa.o
1.1.1.3   root      145: ui-obj-$(CONFIG_CURSES) += curses.o
                    146: vnc-obj-y += vnc.o d3des.o
                    147: vnc-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
                    148: vnc-obj-y += vnc-enc-tight.o vnc-palette.o
                    149: vnc-obj-y += vnc-enc-zrle.o
                    150: vnc-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
                    151: vnc-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
1.1       root      152: ifdef CONFIG_VNC_THREAD
1.1.1.3   root      153: vnc-obj-y += vnc-jobs-async.o
1.1       root      154: else
1.1.1.3   root      155: vnc-obj-y += vnc-jobs-sync.o
1.1       root      156: endif
                    157: common-obj-y += $(addprefix ui/, $(ui-obj-y))
1.1.1.3   root      158: common-obj-$(CONFIG_VNC) += $(addprefix ui/, $(vnc-obj-y))
1.1       root      159: 
                    160: common-obj-y += iov.o acl.o
1.1.1.3   root      161: common-obj-$(CONFIG_POSIX) += compatfd.o
1.1       root      162: common-obj-y += notify.o event_notifier.o
1.1.1.2   root      163: common-obj-y += qemu-timer.o qemu-timer-common.o
1.1       root      164: 
                    165: slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
                    166: slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
1.1.1.4 ! root      167: slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o arp_table.o
1.1       root      168: common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
                    169: 
                    170: # xen backend driver support
1.1.1.3   root      171: common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o
                    172: common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o
1.1       root      173: 
                    174: ######################################################################
                    175: # libuser
                    176: 
                    177: user-obj-y =
                    178: user-obj-y += envlist.o path.o
                    179: user-obj-y += tcg-runtime.o host-utils.o
                    180: user-obj-y += cutils.o cache-utils.o
1.1.1.4 ! root      181: user-obj-y += $(trace-obj-y)
1.1       root      182: 
                    183: ######################################################################
                    184: # libhw
                    185: 
                    186: hw-obj-y =
                    187: hw-obj-y += vl.o loader.o
1.1.1.3   root      188: hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
1.1.1.4 ! root      189: hw-obj-y += usb-libhw.o
1.1.1.3   root      190: hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
1.1.1.2   root      191: hw-obj-y += fw_cfg.o
                    192: hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
                    193: hw-obj-$(CONFIG_PCI) += msix.o msi.o
                    194: hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
                    195: hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
1.1       root      196: hw-obj-y += watchdog.o
                    197: hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
                    198: hw-obj-$(CONFIG_ECC) += ecc.o
                    199: hw-obj-$(CONFIG_NAND) += nand.o
                    200: hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
                    201: hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
                    202: 
                    203: hw-obj-$(CONFIG_M48T59) += m48t59.o
                    204: hw-obj-$(CONFIG_ESCC) += escc.o
                    205: hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
                    206: 
                    207: hw-obj-$(CONFIG_SERIAL) += serial.o
                    208: hw-obj-$(CONFIG_PARALLEL) += parallel.o
                    209: hw-obj-$(CONFIG_I8254) += i8254.o
                    210: hw-obj-$(CONFIG_PCSPK) += pcspk.o
                    211: hw-obj-$(CONFIG_PCKBD) += pckbd.o
                    212: hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
1.1.1.2   root      213: hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
1.1.1.3   root      214: hw-obj-$(CONFIG_USB_EHCI) += usb-ehci.o
1.1       root      215: hw-obj-$(CONFIG_FDC) += fdc.o
                    216: hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
                    217: hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
                    218: hw-obj-$(CONFIG_DMA) += dma.o
1.1.1.3   root      219: hw-obj-$(CONFIG_HPET) += hpet.o
                    220: hw-obj-$(CONFIG_APPLESMC) += applesmc.o
                    221: hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
                    222: hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
                    223: hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
1.1.1.4 ! root      224: hw-obj-$(CONFIG_I8259) += i8259.o
1.1       root      225: 
                    226: # PPC devices
                    227: hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
                    228: # Mac shared devices
                    229: hw-obj-$(CONFIG_MACIO) += macio.o
                    230: hw-obj-$(CONFIG_CUDA) += cuda.o
                    231: hw-obj-$(CONFIG_ADB) += adb.o
                    232: hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
                    233: hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
                    234: # OldWorld PowerMac
                    235: hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
                    236: hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
                    237: # NewWorld PowerMac
                    238: hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
                    239: hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
                    240: # PowerPC E500 boards
                    241: hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
                    242: 
                    243: # MIPS devices
                    244: hw-obj-$(CONFIG_PIIX4) += piix4.o
1.1.1.4 ! root      245: hw-obj-$(CONFIG_G364FB) += g364fb.o
1.1       root      246: 
                    247: # PCI watchdog devices
1.1.1.2   root      248: hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
1.1       root      249: 
1.1.1.2   root      250: hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
1.1       root      251: 
                    252: # PCI network cards
1.1.1.2   root      253: hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
                    254: hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
                    255: hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
                    256: hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
                    257: hw-obj-$(CONFIG_E1000_PCI) += e1000.o
                    258: hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
1.1       root      259: 
                    260: hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
                    261: hw-obj-$(CONFIG_LAN9118) += lan9118.o
                    262: hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
1.1.1.4 ! root      263: hw-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
1.1       root      264: 
                    265: # IDE
1.1.1.3   root      266: hw-obj-$(CONFIG_IDE_CORE) += ide/core.o ide/atapi.o
1.1       root      267: hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o
                    268: hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o
                    269: hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
                    270: hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
                    271: hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
                    272: hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
                    273: hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
1.1.1.2   root      274: hw-obj-$(CONFIG_AHCI) += ide/ahci.o
                    275: hw-obj-$(CONFIG_AHCI) += ide/ich.o
1.1       root      276: 
                    277: # SCSI layer
1.1.1.2   root      278: hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
1.1       root      279: hw-obj-$(CONFIG_ESP) += esp.o
                    280: 
                    281: hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
                    282: hw-obj-y += qdev-addr.o
                    283: 
                    284: # VGA
                    285: hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
                    286: hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
                    287: hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
                    288: hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
1.1.1.3   root      289: hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o
1.1       root      290: 
                    291: hw-obj-$(CONFIG_RC4030) += rc4030.o
                    292: hw-obj-$(CONFIG_DP8393X) += dp8393x.o
                    293: hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
                    294: hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
                    295: 
                    296: # Sound
                    297: sound-obj-y =
                    298: sound-obj-$(CONFIG_SB16) += sb16.o
                    299: sound-obj-$(CONFIG_ES1370) += es1370.o
                    300: sound-obj-$(CONFIG_AC97) += ac97.o
                    301: sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
                    302: sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
                    303: sound-obj-$(CONFIG_CS4231A) += cs4231a.o
1.1.1.2   root      304: sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
1.1       root      305: 
                    306: adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
                    307: hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
                    308: 
1.1.1.4 ! root      309: 9pfs-nested-$(CONFIG_VIRTFS)  = virtio-9p.o
        !           310: 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
        !           311: 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
        !           312: 9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-coth.o cofs.o codir.o cofile.o
        !           313: 9pfs-nested-$(CONFIG_VIRTFS) += coxattr.o virtio-9p-synth.o
        !           314: 9pfs-nested-$(CONFIG_OPEN_BY_HANDLE) +=  virtio-9p-handle.o
1.1.1.3   root      315: 
                    316: hw-obj-$(CONFIG_REALLY_VIRTFS) += $(addprefix 9pfs/, $(9pfs-nested-y))
1.1.1.4 ! root      317: $(addprefix 9pfs/, $(9pfs-nested-y)): QEMU_CFLAGS+=$(GLIB_CFLAGS)
1.1.1.3   root      318: 
1.1       root      319: 
                    320: ######################################################################
                    321: # libdis
                    322: # NOTE: the disassembler code is only needed for debugging
                    323: 
                    324: libdis-y =
                    325: libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o
                    326: libdis-$(CONFIG_ARM_DIS) += arm-dis.o
                    327: libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
                    328: libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
                    329: libdis-$(CONFIG_I386_DIS) += i386-dis.o
                    330: libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
                    331: libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
                    332: libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
                    333: libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
                    334: libdis-$(CONFIG_PPC_DIS) += ppc-dis.o
                    335: libdis-$(CONFIG_S390_DIS) += s390-dis.o
                    336: libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
                    337: libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
                    338: 
1.1.1.2   root      339: ######################################################################
                    340: # trace
1.1       root      341: 
1.1.1.2   root      342: ifeq ($(TRACE_BACKEND),dtrace)
1.1.1.3   root      343: trace.h: trace.h-timestamp trace-dtrace.h
                    344: else
                    345: trace.h: trace.h-timestamp
                    346: endif
1.1.1.4 ! root      347: trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
1.1.1.3   root      348:        $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@,"  GEN   trace.h")
                    349:        @cmp -s $@ trace.h || cp $@ trace.h
                    350: 
                    351: trace.c: trace.c-timestamp
1.1.1.4 ! root      352: trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
1.1.1.3   root      353:        $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@,"  GEN   trace.c")
                    354:        @cmp -s $@ trace.c || cp $@ trace.c
                    355: 
                    356: trace.o: trace.c $(GENERATED_HEADERS)
                    357: 
                    358: trace-dtrace.h: trace-dtrace.dtrace
                    359:        $(call quiet-command,dtrace -o $@ -h -s $<, "  GEN   trace-dtrace.h")
                    360: 
                    361: # Normal practice is to name DTrace probe file with a '.d' extension
                    362: # but that gets picked up by QEMU's Makefile as an external dependency
                    363: # rule file. So we use '.dtrace' instead
                    364: trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
1.1.1.4 ! root      365: trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
1.1.1.3   root      366:        $(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@,"  GEN   trace-dtrace.dtrace")
                    367:        @cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
                    368: 
                    369: trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
                    370:        $(call quiet-command,dtrace -o $@ -G -s $<, "  GEN trace-dtrace.o")
                    371: 
                    372: ifeq ($(LIBTOOL),)
                    373: trace-dtrace.lo: trace-dtrace.dtrace
                    374:        @echo "missing libtool. please install and rerun configure."; exit 1
                    375: else
                    376: trace-dtrace.lo: trace-dtrace.dtrace
1.1.1.4 ! root      377:        $(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, "  lt GEN trace-dtrace.o")
1.1.1.3   root      378: endif
                    379: 
1.1.1.4 ! root      380: trace/simple.o: trace/simple.c $(GENERATED_HEADERS)
1.1.1.3   root      381: 
1.1.1.4 ! root      382: trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
        !           383: ifneq ($(TRACE_BACKEND),dtrace)
1.1.1.2   root      384: trace-obj-y = trace.o
                    385: endif
1.1       root      386: 
1.1.1.4 ! root      387: trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
        !           388: 
        !           389: trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
        !           390: trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
        !           391: 
        !           392: trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o
        !           393: 
        !           394: trace-nested-y += control.o
        !           395: 
        !           396: trace-obj-y += $(addprefix trace/, $(trace-nested-y))
        !           397: 
        !           398: $(trace-obj-y): $(GENERATED_HEADERS)
        !           399: 
1.1.1.3   root      400: ######################################################################
                    401: # smartcard
                    402: 
                    403: libcacard-y = cac.o event.o vcard.o vreader.o vcard_emul_nss.o vcard_emul_type.o card_7816.o
                    404: 
                    405: ######################################################################
                    406: # qapi
                    407: 
                    408: qapi-nested-y = qapi-visit-core.o qmp-input-visitor.o qmp-output-visitor.o qapi-dealloc-visitor.o
                    409: qapi-nested-y += qmp-registry.o qmp-dispatch.o
                    410: qapi-obj-y = $(addprefix qapi/, $(qapi-nested-y))
                    411: 
1.1.1.4 ! root      412: common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o $(qapi-obj-y)
        !           413: common-obj-y += qmp.o hmp.o
        !           414: 
        !           415: ######################################################################
        !           416: # guest agent
        !           417: 
        !           418: qga-nested-y = guest-agent-commands.o guest-agent-command-state.o
        !           419: qga-obj-y = $(addprefix qga/, $(qga-nested-y))
        !           420: qga-obj-y += qemu-ga.o qemu-sockets.o module.o qemu-option.o
        !           421: qga-obj-$(CONFIG_WIN32) += oslib-win32.o
        !           422: qga-obj-$(CONFIG_POSIX) += oslib-posix.o
        !           423: 
1.1.1.2   root      424: vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
1.1       root      425: 
1.1.1.2   root      426: vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
1.1       root      427: 
1.1.1.4 ! root      428: QEMU_CFLAGS+=$(GLIB_CFLAGS)
        !           429: 

unix.superglobalmegacorp.com