--- qemu/configure 2018/04/24 17:01:50 1.1.1.8 +++ qemu/configure 2018/04/24 18:33:57 1.1.1.14 @@ -13,27 +13,167 @@ fi TMPC="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.c" TMPO="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.o" -TMPE="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}" -TMPS="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.S" -TMPI="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.i" -TMPSDLLOG="${TMPDIR1}/qemu-conf-sdl-$$-${RANDOM}.log" +TMPE="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.exe" -trap "rm -f $TMPC $TMPO $TMPE $TMPS $TMPI $TMPSDLLOG; exit" 0 2 3 15 +# NB: do not call "exit" in the trap handler; this is buggy with some shells; +# see <1285349658-3122-1-git-send-email-loic.minier@linaro.org> +trap "rm -f $TMPC $TMPO $TMPE" EXIT INT QUIT TERM +rm -f config.log + +compile_object() { + echo $cc $QEMU_CFLAGS -c -o $TMPO $TMPC >> config.log + $cc $QEMU_CFLAGS -c -o $TMPO $TMPC >> config.log 2>&1 +} + +compile_prog() { + local_cflags="$1" + local_ldflags="$2" + echo $cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags >> config.log + $cc $QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags >> config.log 2>&1 +} + +# symbolically link $1 to $2. Portable version of "ln -sf". +symlink() { + rm -f $2 + ln -s $1 $2 +} + +# check whether a command is available to this shell (may be either an +# executable or a builtin) +has() { + type "$1" >/dev/null 2>&1 +} + +# search for an executable in PATH +path_of() { + local_command="$1" + local_ifs="$IFS" + local_dir="" + + # pathname has a dir component? + if [ "${local_command#*/}" != "$local_command" ]; then + if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then + echo "$local_command" + return 0 + fi + fi + if [ -z "$local_command" ]; then + return 1 + fi + + IFS=: + for local_dir in $PATH; do + if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then + echo "$local_dir/$local_command" + IFS="${local_ifs:-$(printf ' \t\n')}" + return 0 + fi + done + # not found + IFS="${local_ifs:-$(printf ' \t\n')}" + return 1 +} # default parameters -prefix="" +source_path=`dirname "$0"` +cpu="" interp_prefix="/usr/gnemul/qemu-%M" static="no" +sparc_cpu="" cross_prefix="" -cc="gcc" audio_drv_list="" -audio_card_list="ac97 es1370 sb16" -audio_possible_cards="ac97 es1370 sb16 cs4231a adlib gus" +audio_card_list="ac97 es1370 sb16 hda" +audio_possible_cards="ac97 es1370 sb16 cs4231a adlib gus hda" +block_drv_whitelist="" host_cc="gcc" -ar="ar" -make="make" -install="install" -strip="strip" +helper_cflags="" +libs_softmmu="" +libs_tools="" +audio_pt_int="" +audio_win_int="" +cc_i386=i386-pc-linux-gnu-gcc + +target_list="" + +# Default value for a variable defining feature "foo". +# * foo="no" feature will only be used if --enable-foo arg is given +# * foo="" feature will be searched for, and if found, will be used +# unless --disable-foo is given +# * foo="yes" this value will only be set by --enable-foo flag. +# feature will searched for, +# if not found, configure exits with error +# +# Always add --enable-foo and --disable-foo command line args. +# Distributions want to ensure that several features are compiled in, and it +# is impossible without a --enable-foo that exits if a feature is not found. + +bluez="" +brlapi="" +curl="" +curses="" +docs="" +fdt="" +kvm="" +kvm_para="" +nptl="" +sdl="" +sparse="no" +uuid="" +vde="" +vnc_tls="" +vnc_sasl="" +vnc_jpeg="" +vnc_png="" +vnc_thread="no" +xen="" +linux_aio="" +attr="" +vhost_net="" +xfs="" + +gprof="no" +debug_tcg="no" +debug_mon="no" +debug="no" +strip_opt="yes" +bigendian="no" +mingw32="no" +EXESUF="" +prefix="/usr/local" +mandir="\${prefix}/share/man" +datadir="\${prefix}/share/qemu" +docdir="\${prefix}/share/doc/qemu" +bindir="\${prefix}/bin" +sysconfdir="\${prefix}/etc" +confsuffix="/qemu" +slirp="yes" +fmod_lib="" +fmod_inc="" +oss_lib="" +bsd="no" +linux="no" +solaris="no" +profiler="no" +cocoa="no" +softmmu="yes" +linux_user="no" +darwin_user="no" +bsd_user="no" +guest_base="" +uname_release="" +io_thread="no" +mixemu="no" +kerneldir="" +aix="no" +blobs="yes" +pkgversion="" +check_utests="no" +user_pie="no" +zero_malloc="" +trace_backend="nop" +trace_file="trace" +spice="" +rbd="" # parse CC options first for opt do @@ -41,30 +181,58 @@ for opt do case "$opt" in --cross-prefix=*) cross_prefix="$optarg" ;; - --cc=*) cc="$optarg" + --cc=*) CC="$optarg" + ;; + --source-path=*) source_path="$optarg" + ;; + --cpu=*) cpu="$optarg" + ;; + --extra-cflags=*) QEMU_CFLAGS="$optarg $QEMU_CFLAGS" + ;; + --extra-ldflags=*) LDFLAGS="$optarg $LDFLAGS" + ;; + --sparc_cpu=*) + sparc_cpu="$optarg" + case $sparc_cpu in + v7|v8|v8plus|v8plusa) + cpu="sparc" + ;; + v9) + cpu="sparc64" + ;; + *) + echo "undefined SPARC architecture. Exiting"; + exit 1 + ;; + esac ;; esac done - # OS specific # Using uname is really, really broken. Once we have the right set of checks # we can eliminate it's usage altogether -cc="${cross_prefix}${cc}" -ar="${cross_prefix}${ar}" -strip="${cross_prefix}${strip}" +cc="${cross_prefix}${CC-gcc}" +ar="${cross_prefix}${AR-ar}" +objcopy="${cross_prefix}${OBJCOPY-objcopy}" +ld="${cross_prefix}${LD-ld}" +strip="${cross_prefix}${STRIP-strip}" +windres="${cross_prefix}${WINDRES-windres}" +pkg_config="${cross_prefix}${PKG_CONFIG-pkg-config}" +sdl_config="${cross_prefix}${SDL_CONFIG-sdl-config}" -# check that the C compiler works. -cat > $TMPC < /dev/null 2> /dev/null ; then - : C compiler works ok -else - echo "ERROR: \"$cc\" either does not exist or does not work" - exit 1 -fi +# make source path absolute +source_path=`cd "$source_path"; pwd` check_define() { cat > $TMPC < $TMPC < /dev/null 2> /dev/null + compile_object } -if check_define __i386__ ; then +if test ! -z "$cpu" ; then + # command line argument + : +elif check_define __i386__ ; then cpu="i386" elif check_define __x86_64__ ; then cpu="x86_64" @@ -94,247 +265,226 @@ elif check_define _ARCH_PPC ; then else cpu="ppc" fi +elif check_define __mips__ ; then + cpu="mips" +elif check_define __ia64__ ; then + cpu="ia64" +elif check_define __s390__ ; then + if check_define __s390x__ ; then + cpu="s390x" + else + cpu="s390" + fi else cpu=`uname -m` fi -target_list="" case "$cpu" in + alpha|cris|ia64|m68k|microblaze|ppc|ppc64|sparc64) + cpu="$cpu" + ;; i386|i486|i586|i686|i86pc|BePC) cpu="i386" ;; x86_64|amd64) cpu="x86_64" ;; - alpha) - cpu="alpha" - ;; armv*b) cpu="armv4b" ;; armv*l) cpu="armv4l" ;; - cris) - cpu="cris" - ;; parisc|parisc64) cpu="hppa" ;; - ia64) - cpu="ia64" - ;; - m68k) - cpu="m68k" - ;; - mips) + mips*) cpu="mips" ;; - mips64) - cpu="mips64" - ;; - ppc) - cpu="ppc" - ;; - ppc64) - cpu="ppc64" - ;; - s390*) + s390) cpu="s390" ;; + s390x) + cpu="s390x" + ;; sparc|sun4[cdmuv]) cpu="sparc" ;; - sparc64) - cpu="sparc64" - ;; *) - cpu="unknown" + echo "Unsupported CPU = $cpu" + exit 1 ;; esac -gprof="no" -sparse="no" -bigendian="no" -mingw32="no" -EXESUF="" -gdbstub="yes" -slirp="yes" -vde="yes" -fmod_lib="" -fmod_inc="" -oss_lib="" -vnc_tls="yes" -bsd="no" -linux="no" -solaris="no" -kqemu="no" -profiler="no" -cocoa="no" -check_gfx="yes" -softmmu="yes" -linux_user="no" -darwin_user="no" -bsd_user="no" -build_docs="no" -uname_release="" -curses="yes" -aio="yes" -nptl="yes" -mixemu="no" -bluez="yes" -kvm="yes" -kerneldir="" -aix="no" -blobs="yes" -fdt="yes" -sdl_x11="no" # OS specific if check_define __linux__ ; then targetos="Linux" elif check_define _WIN32 ; then targetos='MINGW32' +elif check_define __OpenBSD__ ; then + targetos='OpenBSD' +elif check_define __sun__ ; then + targetos='SunOS' +elif check_define __HAIKU__ ; then + targetos='Haiku' else targetos=`uname -s` fi + case $targetos in CYGWIN*) -mingw32="yes" -OS_CFLAGS="-mno-cygwin" -if [ "$cpu" = "i386" ] ; then - kqemu="yes" -fi -audio_possible_drivers="sdl" + mingw32="yes" + QEMU_CFLAGS="-mno-cygwin $QEMU_CFLAGS" + audio_possible_drivers="winwave sdl" + audio_drv_list="winwave" ;; MINGW32*) -mingw32="yes" -if [ "$cpu" = "i386" ] ; then - kqemu="yes" -fi -audio_possible_drivers="dsound sdl fmod" + mingw32="yes" + audio_possible_drivers="winwave dsound sdl fmod" + audio_drv_list="winwave" ;; GNU/kFreeBSD) -audio_drv_list="oss" -audio_possible_drivers="oss sdl esd pa" -if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then - kqemu="yes" -fi + bsd="yes" + audio_drv_list="oss" + audio_possible_drivers="oss sdl esd pa" ;; FreeBSD) -bsd="yes" -audio_drv_list="oss" -audio_possible_drivers="oss sdl esd pa" -if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then - kqemu="yes" -fi + bsd="yes" + make="${MAKE-gmake}" + audio_drv_list="oss" + audio_possible_drivers="oss sdl esd pa" + # needed for kinfo_getvmmap(3) in libutil.h + LIBS="-lutil $LIBS" +;; +DragonFly) + bsd="yes" + make="${MAKE-gmake}" + audio_drv_list="oss" + audio_possible_drivers="oss sdl esd pa" ;; NetBSD) -bsd="yes" -audio_drv_list="oss" -audio_possible_drivers="oss sdl esd" -oss_lib="-lossaudio" + bsd="yes" + make="${MAKE-gmake}" + audio_drv_list="oss" + audio_possible_drivers="oss sdl esd" + oss_lib="-lossaudio" ;; OpenBSD) -bsd="yes" -openbsd="yes" -audio_drv_list="oss" -audio_possible_drivers="oss sdl esd" -oss_lib="-lossaudio" + bsd="yes" + make="${MAKE-gmake}" + audio_drv_list="oss" + audio_possible_drivers="oss sdl esd" + oss_lib="-lossaudio" ;; Darwin) -bsd="yes" -darwin="yes" -# on Leopard most of the system is 32-bit, so we have to ask the kernel it if we can run 64-bit userspace code -if [ "$cpu" = "i386" ] ; then + bsd="yes" + darwin="yes" + # on Leopard most of the system is 32-bit, so we have to ask the kernel it if we can + # run 64-bit userspace code + if [ "$cpu" = "i386" ] ; then is_x86_64=`sysctl -n hw.optional.x86_64` [ "$is_x86_64" = "1" ] && cpu=x86_64 -fi -if [ "$cpu" = "x86_64" ] ; then - OS_CFLAGS="-arch x86_64" - LDFLAGS="-arch x86_64" -else - OS_CFLAGS="-mdynamic-no-pic" -fi -darwin_user="yes" -cocoa="yes" -audio_drv_list="coreaudio" -audio_possible_drivers="coreaudio sdl fmod" -OS_LDFLAGS="-framework CoreFoundation -framework IOKit" + fi + if [ "$cpu" = "x86_64" ] ; then + QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS" + LDFLAGS="-arch x86_64 $LDFLAGS" + else + QEMU_CFLAGS="-mdynamic-no-pic $QEMU_CFLAGS" + fi + darwin_user="yes" + cocoa="yes" + audio_drv_list="coreaudio" + audio_possible_drivers="coreaudio sdl fmod" + LDFLAGS="-framework CoreFoundation -framework IOKit $LDFLAGS" + libs_softmmu="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu" ;; SunOS) - solaris="yes" - make="gmake" - install="ginstall" - needs_libsunmath="no" - solarisrev=`uname -r | cut -f2 -d.` - # have to select again, because `uname -m` returns i86pc - # even on an x86_64 box. - solariscpu=`isainfo -k` - if test "${solariscpu}" = "amd64" ; then - cpu="x86_64" - fi - if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then - if test "$solarisrev" -le 9 ; then - if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then - needs_libsunmath="yes" - else - echo "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" - echo "libsunmath from the Sun Studio compilers tools, due to a lack of" - echo "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" - echo "Studio 11 can be downloaded from www.sun.com." - exit 1 - fi - fi - if test "$solarisrev" -ge 9 ; then - kqemu="yes" - fi - fi - if test -f /usr/include/sys/soundcard.h ; then - audio_drv_list="oss" + solaris="yes" + make="${MAKE-gmake}" + install="${INSTALL-ginstall}" + ld="gld" + needs_libsunmath="no" + solarisrev=`uname -r | cut -f2 -d.` + # have to select again, because `uname -m` returns i86pc + # even on an x86_64 box. + solariscpu=`isainfo -k` + if test "${solariscpu}" = "amd64" ; then + cpu="x86_64" + fi + if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then + if test "$solarisrev" -le 9 ; then + if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then + needs_libsunmath="yes" + QEMU_CFLAGS="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS" + LDFLAGS="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS" + LIBS="-lsunmath $LIBS" + else + echo "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" + echo "libsunmath from the Sun Studio compilers tools, due to a lack of" + echo "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" + echo "Studio 11 can be downloaded from www.sun.com." + exit 1 + fi fi - audio_possible_drivers="oss sdl" + fi + if test -f /usr/include/sys/soundcard.h ; then + audio_drv_list="oss" + fi + audio_possible_drivers="oss sdl" +# needed for CMSG_ macros in sys/socket.h + QEMU_CFLAGS="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS" +# needed for TIOCWIN* defines in termios.h + QEMU_CFLAGS="-D__EXTENSIONS__ $QEMU_CFLAGS" + QEMU_CFLAGS="-std=gnu99 $QEMU_CFLAGS" + LIBS="-lsocket -lnsl -lresolv $LIBS" ;; AIX) -aix="yes" -make="gmake" + aix="yes" + make="${MAKE-gmake}" +;; +Haiku) + haiku="yes" + QEMU_CFLAGS="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS" + LIBS="-lposix_error_mapper -lnetwork $LIBS" ;; *) -audio_drv_list="oss" -audio_possible_drivers="oss alsa sdl esd pa" -linux="yes" -linux_user="yes" -usb="linux" -if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then - kqemu="yes" + audio_drv_list="oss" + audio_possible_drivers="oss alsa sdl esd pa" + linux="yes" + linux_user="yes" + usb="linux" + if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" -fi + fi ;; esac if [ "$bsd" = "yes" ] ; then if [ "$darwin" != "yes" ] ; then - make="gmake" usb="bsd" fi bsd_user="yes" fi -# find source path -source_path=`dirname "$0"` -source_path_used="no" -workdir=`pwd` -if [ -z "$source_path" ]; then - source_path=$workdir -else - source_path=`cd "$source_path"; pwd` +: ${make=${MAKE-make}} +: ${install=${INSTALL-install}} + +if test "$mingw32" = "yes" ; then + EXESUF=".exe" + QEMU_CFLAGS="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS" + # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) + QEMU_CFLAGS="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS" + LIBS="-lwinmm -lws2_32 -liphlpapi $LIBS" + prefix="c:/Program Files/Qemu" + mandir="\${prefix}" + datadir="\${prefix}" + docdir="\${prefix}" + bindir="\${prefix}" + sysconfdir="\${prefix}" + confsuffix="" fi -[ -f "$workdir/vl.c" ] || source_path_used="yes" -werror="no" -# generate compile errors on warnings for development builds -#if grep cvs $source_path/VERSION > /dev/null 2>&1 ; then -#werror="yes"; -#fi +werror="" for opt do optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'` @@ -345,8 +495,7 @@ for opt do ;; --interp-prefix=*) interp_prefix="$optarg" ;; - --source-path=*) source_path="$optarg" - source_path_used="yes" + --source-path=*) ;; --cross-prefix=*) ;; @@ -358,20 +507,38 @@ for opt do ;; --install=*) install="$optarg" ;; - --extra-cflags=*) CFLAGS="$optarg" + --extra-cflags=*) ;; - --extra-ldflags=*) LDFLAGS="$optarg" + --extra-ldflags=*) ;; - --cpu=*) cpu="$optarg" + --cpu=*) ;; --target-list=*) target_list="$optarg" ;; + --enable-trace-backend=*) trace_backend="$optarg" + ;; + --with-trace-file=*) trace_file="$optarg" + ;; --enable-gprof) gprof="yes" ;; - --static) static="yes" + --static) + static="yes" + LDFLAGS="-static $LDFLAGS" + ;; + --mandir=*) mandir="$optarg" + ;; + --bindir=*) bindir="$optarg" + ;; + --datadir=*) datadir="$optarg" + ;; + --docdir=*) docdir="$optarg" + ;; + --sysconfdir=*) sysconfdir="$optarg" ;; --disable-sdl) sdl="no" ;; + --enable-sdl) sdl="yes" + ;; --fmod-lib=*) fmod_lib="$optarg" ;; --fmod-inc=*) fmod_inc="$optarg" @@ -382,24 +549,79 @@ for opt do ;; --audio-drv-list=*) audio_drv_list="$optarg" ;; + --block-drv-whitelist=*) block_drv_whitelist=`echo "$optarg" | sed -e 's/,/ /g'` + ;; + --enable-debug-tcg) debug_tcg="yes" + ;; + --disable-debug-tcg) debug_tcg="no" + ;; + --enable-debug-mon) debug_mon="yes" + ;; + --disable-debug-mon) debug_mon="no" + ;; + --enable-debug) + # Enable debugging options that aren't excessively noisy + debug_tcg="yes" + debug_mon="yes" + debug="yes" + strip_opt="no" + ;; --enable-sparse) sparse="yes" ;; --disable-sparse) sparse="no" ;; + --disable-strip) strip_opt="no" + ;; --disable-vnc-tls) vnc_tls="no" ;; + --enable-vnc-tls) vnc_tls="yes" + ;; + --disable-vnc-sasl) vnc_sasl="no" + ;; + --enable-vnc-sasl) vnc_sasl="yes" + ;; + --disable-vnc-jpeg) vnc_jpeg="no" + ;; + --enable-vnc-jpeg) vnc_jpeg="yes" + ;; + --disable-vnc-png) vnc_png="no" + ;; + --enable-vnc-png) vnc_png="yes" + ;; + --disable-vnc-thread) vnc_thread="no" + ;; + --enable-vnc-thread) vnc_thread="yes" + ;; --disable-slirp) slirp="no" ;; + --disable-uuid) uuid="no" + ;; + --enable-uuid) uuid="yes" + ;; --disable-vde) vde="no" ;; - --disable-kqemu) kqemu="no" + --enable-vde) vde="yes" + ;; + --disable-xen) xen="no" + ;; + --enable-xen) xen="yes" ;; --disable-brlapi) brlapi="no" ;; + --enable-brlapi) brlapi="yes" + ;; --disable-bluez) bluez="no" ;; + --enable-bluez) bluez="yes" + ;; --disable-kvm) kvm="no" ;; + --enable-kvm) kvm="yes" + ;; + --disable-spice) spice="no" + ;; + --enable-spice) spice="yes" + ;; --enable-profiler) profiler="yes" ;; --enable-cocoa) @@ -407,12 +629,16 @@ for opt do sdl="no" ; audio_drv_list="coreaudio `echo $audio_drv_list | sed s,coreaudio,,g`" ;; - --disable-gfx-check) check_gfx="no" - ;; --disable-system) softmmu="no" ;; --enable-system) softmmu="yes" ;; + --disable-user) + linux_user="no" ; + bsd_user="no" ; + darwin_user="no" + ;; + --enable-user) ;; --disable-linux-user) linux_user="no" ;; --enable-linux-user) linux_user="yes" @@ -425,19 +651,17 @@ for opt do ;; --enable-bsd-user) bsd_user="yes" ;; + --enable-guest-base) guest_base="yes" + ;; + --disable-guest-base) guest_base="no" + ;; + --enable-user-pie) user_pie="yes" + ;; + --disable-user-pie) user_pie="no" + ;; --enable-uname-release=*) uname_release="$optarg" ;; --sparc_cpu=*) - sparc_cpu="$optarg" - case $sparc_cpu in - v7|v8) SP_CFLAGS="-m32 -mcpu=${sparc_cpu} -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m32" - target_cpu="sparc"; cpu="sparc" ;; - v8plus|v8plusa) SP_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m32" - target_cpu="sparc"; cpu="sparc" ;; - v9) SP_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m64" - target_cpu="sparc64"; cpu="sparc64" ;; - *) echo "undefined SPARC architecture. Exiting";exit 1;; - esac ;; --enable-werror) werror="yes" ;; @@ -445,69 +669,134 @@ for opt do ;; --disable-curses) curses="no" ;; + --enable-curses) curses="yes" + ;; + --disable-curl) curl="no" + ;; + --enable-curl) curl="yes" + ;; + --disable-fdt) fdt="no" + ;; + --enable-fdt) fdt="yes" + ;; + --disable-check-utests) check_utests="no" + ;; + --enable-check-utests) check_utests="yes" + ;; --disable-nptl) nptl="no" ;; + --enable-nptl) nptl="yes" + ;; --enable-mixemu) mixemu="yes" ;; - --disable-aio) aio="no" + --disable-linux-aio) linux_aio="no" + ;; + --enable-linux-aio) linux_aio="yes" + ;; + --disable-attr) attr="no" + ;; + --enable-attr) attr="yes" + ;; + --enable-io-thread) io_thread="yes" ;; --disable-blobs) blobs="no" ;; --kerneldir=*) kerneldir="$optarg" ;; + --with-pkgversion=*) pkgversion=" ($optarg)" + ;; + --disable-docs) docs="no" + ;; + --enable-docs) docs="yes" + ;; + --disable-vhost-net) vhost_net="no" + ;; + --enable-vhost-net) vhost_net="yes" + ;; + --*dir) + ;; + --disable-rbd) rbd="no" + ;; + --enable-rbd) rbd="yes" + ;; *) echo "ERROR: unknown option $opt"; show_help="yes" ;; esac done -# default flags for all hosts -CFLAGS="$CFLAGS -O2 -g -fno-strict-aliasing" -CFLAGS="$CFLAGS -Wall -Wundef -Wendif-labels -Wwrite-strings -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls" -LDFLAGS="$LDFLAGS -g" -if test "$werror" = "yes" ; then -CFLAGS="$CFLAGS -Werror" -fi - -if test "$solaris" = "no" ; then - if ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then - LDFLAGS="$LDFLAGS -Wl,--warn-common" - fi -fi - # # If cpu ~= sparc and sparc_cpu hasn't been defined, plug in the right -# ARCH_CFLAGS/ARCH_LDFLAGS (assume sparc_v8plus for 32-bit and sparc_v9 for 64-bit) +# QEMU_CFLAGS/LDFLAGS (assume sparc_v8plus for 32-bit and sparc_v9 for 64-bit) # +host_guest_base="no" case "$cpu" in - sparc) if test -z "$sparc_cpu" ; then - ARCH_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_v8plus__" - ARCH_LDFLAGS="-m32" - else - ARCH_CFLAGS="${SP_CFLAGS}" - ARCH_LDFLAGS="${SP_LDFLAGS}" + sparc) case $sparc_cpu in + v7|v8) + QEMU_CFLAGS="-mcpu=${sparc_cpu} -D__sparc_${sparc_cpu}__ $QEMU_CFLAGS" + ;; + v8plus|v8plusa) + QEMU_CFLAGS="-mcpu=ultrasparc -D__sparc_${sparc_cpu}__ $QEMU_CFLAGS" + ;; + *) # sparc_cpu not defined in the command line + QEMU_CFLAGS="-mcpu=ultrasparc -D__sparc_v8plus__ $QEMU_CFLAGS" + esac + LDFLAGS="-m32 $LDFLAGS" + QEMU_CFLAGS="-m32 -ffixed-g2 -ffixed-g3 $QEMU_CFLAGS" + if test "$solaris" = "no" ; then + QEMU_CFLAGS="-ffixed-g1 -ffixed-g6 $QEMU_CFLAGS" + helper_cflags="-ffixed-i0" fi ;; - sparc64) if test -z "$sparc_cpu" ; then - ARCH_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_v9__" - ARCH_LDFLAGS="-m64" - else - ARCH_CFLAGS="${SP_CFLAGS}" - ARCH_LDFLAGS="${SP_LDFLAGS}" + sparc64) + QEMU_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_v9__ $QEMU_CFLAGS" + LDFLAGS="-m64 $LDFLAGS" + QEMU_CFLAGS="-ffixed-g5 -ffixed-g6 -ffixed-g7 $QEMU_CFLAGS" + if test "$solaris" != "no" ; then + QEMU_CFLAGS="-ffixed-g1 $QEMU_CFLAGS" fi ;; s390) - ARCH_CFLAGS="-march=z900" + QEMU_CFLAGS="-m31 -march=z990 $QEMU_CFLAGS" + LDFLAGS="-m31 $LDFLAGS" + host_guest_base="yes" + ;; + s390x) + QEMU_CFLAGS="-m64 -march=z990 $QEMU_CFLAGS" + LDFLAGS="-m64 $LDFLAGS" + host_guest_base="yes" ;; i386) - ARCH_CFLAGS="-m32" - ARCH_LDFLAGS="-m32" + QEMU_CFLAGS="-m32 $QEMU_CFLAGS" + LDFLAGS="-m32 $LDFLAGS" + cc_i386='$(CC) -m32' + helper_cflags="-fomit-frame-pointer" + host_guest_base="yes" ;; x86_64) - ARCH_CFLAGS="-m64" - ARCH_LDFLAGS="-m64" + QEMU_CFLAGS="-m64 $QEMU_CFLAGS" + LDFLAGS="-m64 $LDFLAGS" + cc_i386='$(CC) -m32' + host_guest_base="yes" + ;; + arm*) + host_guest_base="yes" + ;; + ppc*) + host_guest_base="yes" + ;; + mips*) + host_guest_base="yes" + ;; + ia64*) + host_guest_base="yes" + ;; + hppa*) + host_guest_base="yes" ;; esac +[ -z "$guest_base" ] && guest_base="$host_guest_base" + if test x"$show_help" = x"yes" ; then cat << EOF @@ -522,86 +811,160 @@ echo " --interp-prefix=PREFIX where t echo " use %M for cpu name [$interp_prefix]" echo " --target-list=LIST set target list [$target_list]" echo "" -echo "kqemu kernel acceleration support:" -echo " --disable-kqemu disable kqemu support" -echo "" echo "Advanced options (experts only):" echo " --source-path=PATH path of source code [$source_path]" echo " --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]" echo " --cc=CC use C compiler CC [$cc]" -echo " --host-cc=CC use C compiler CC [$host_cc] for dyngen etc." +echo " --host-cc=CC use C compiler CC [$host_cc] for code run at" +echo " build time" +echo " --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS" +echo " --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS" echo " --make=MAKE use specified make [$make]" echo " --install=INSTALL use specified install [$install]" echo " --static enable static build [$static]" +echo " --mandir=PATH install man pages in PATH" +echo " --datadir=PATH install firmware in PATH" +echo " --docdir=PATH install documentation in PATH" +echo " --bindir=PATH install binaries in PATH" +echo " --sysconfdir=PATH install config in PATH/qemu" +echo " --enable-debug-tcg enable TCG debugging" +echo " --disable-debug-tcg disable TCG debugging (default)" +echo " --enable-debug enable common debug build options" echo " --enable-sparse enable sparse checker" echo " --disable-sparse disable sparse checker (default)" +echo " --disable-strip disable stripping binaries" echo " --disable-werror disable compilation abort on warning" echo " --disable-sdl disable SDL" +echo " --enable-sdl enable SDL" echo " --enable-cocoa enable COCOA (Mac OS X only)" echo " --audio-drv-list=LIST set audio drivers list:" echo " Available drivers: $audio_possible_drivers" echo " --audio-card-list=LIST set list of emulated audio cards [$audio_card_list]" echo " Available cards: $audio_possible_cards" +echo " --block-drv-whitelist=L set block driver whitelist" +echo " (affects only QEMU, not qemu-img)" echo " --enable-mixemu enable mixer emulation" +echo " --disable-xen disable xen backend driver support" +echo " --enable-xen enable xen backend driver support" echo " --disable-brlapi disable BrlAPI" +echo " --enable-brlapi enable BrlAPI" echo " --disable-vnc-tls disable TLS encryption for VNC server" +echo " --enable-vnc-tls enable TLS encryption for VNC server" +echo " --disable-vnc-sasl disable SASL encryption for VNC server" +echo " --enable-vnc-sasl enable SASL encryption for VNC server" +echo " --disable-vnc-jpeg disable JPEG lossy compression for VNC server" +echo " --enable-vnc-jpeg enable JPEG lossy compression for VNC server" +echo " --disable-vnc-png disable PNG compression for VNC server (default)" +echo " --enable-vnc-png enable PNG compression for VNC server" +echo " --disable-vnc-thread disable threaded VNC server" +echo " --enable-vnc-thread enable threaded VNC server" echo " --disable-curses disable curses output" +echo " --enable-curses enable curses output" +echo " --disable-curl disable curl connectivity" +echo " --enable-curl enable curl connectivity" +echo " --disable-fdt disable fdt device tree" +echo " --enable-fdt enable fdt device tree" +echo " --disable-check-utests disable check unit-tests" +echo " --enable-check-utests enable check unit-tests" echo " --disable-bluez disable bluez stack connectivity" +echo " --enable-bluez enable bluez stack connectivity" echo " --disable-kvm disable KVM acceleration support" +echo " --enable-kvm enable KVM acceleration support" echo " --disable-nptl disable usermode NPTL support" +echo " --enable-nptl enable usermode NPTL support" echo " --enable-system enable all system emulation targets" echo " --disable-system disable all system emulation targets" +echo " --enable-user enable supported user emulation targets" +echo " --disable-user disable all user emulation targets" echo " --enable-linux-user enable all linux usermode emulation targets" echo " --disable-linux-user disable all linux usermode emulation targets" echo " --enable-darwin-user enable all darwin usermode emulation targets" echo " --disable-darwin-user disable all darwin usermode emulation targets" echo " --enable-bsd-user enable all BSD usermode emulation targets" echo " --disable-bsd-user disable all BSD usermode emulation targets" +echo " --enable-guest-base enable GUEST_BASE support for usermode" +echo " emulation targets" +echo " --disable-guest-base disable GUEST_BASE support" +echo " --enable-user-pie build usermode emulation targets as PIE" +echo " --disable-user-pie do not build usermode emulation targets as PIE" echo " --fmod-lib path to FMOD library" echo " --fmod-inc path to FMOD includes" echo " --oss-lib path to OSS library" echo " --enable-uname-release=R Return R for uname -r in usermode emulation" echo " --sparc_cpu=V Build qemu for Sparc architecture v7, v8, v8plus, v8plusa, v9" +echo " --disable-uuid disable uuid support" +echo " --enable-uuid enable uuid support" echo " --disable-vde disable support for vde network" -echo " --disable-aio disable AIO support" +echo " --enable-vde enable support for vde network" +echo " --disable-linux-aio disable Linux AIO support" +echo " --enable-linux-aio enable Linux AIO support" +echo " --disable-attr disables attr and xattr support" +echo " --enable-attr enable attr and xattr support" +echo " --enable-io-thread enable IO thread" echo " --disable-blobs disable installing provided firmware blobs" echo " --kerneldir=PATH look for kernel includes in PATH" +echo " --enable-docs enable documentation build" +echo " --disable-docs disable documentation build" +echo " --disable-vhost-net disable vhost-net acceleration support" +echo " --enable-vhost-net enable vhost-net acceleration support" +echo " --enable-trace-backend=B Set trace backend" +echo " Available backends:" $("$source_path"/scripts/tracetool --list-backends) +echo " --with-trace-file=NAME Full PATH,NAME of file to store traces" +echo " Default:trace-" +echo " --disable-spice disable spice" +echo " --enable-spice enable spice" +echo " --enable-rbd enable building the rados block device (rbd)" echo "" echo "NOTE: The object files are built at the place where configure is launched" exit 1 fi -if test "$mingw32" = "yes" ; then - linux="no" - EXESUF=".exe" - oss="no" - linux_user="no" - bsd_user="no" -fi +# check that the C compiler works. +cat > $TMPC </dev/null)"; then - sparse="no" +if compile_object ; then + : C compiler works ok +else + echo "ERROR: \"$cc\" either does not exist or does not work" + exit 1 fi +gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits" +gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags" +gcc_flags="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags" +gcc_flags="-fstack-protector-all $gcc_flags" +cat > $TMPC << EOF +int main(void) { return 0; } +EOF +for flag in $gcc_flags; do + if compile_prog "-Werror $QEMU_CFLAGS" "-Werror $flag" ; then + QEMU_CFLAGS="$QEMU_CFLAGS $flag" + fi +done + # # Solaris specific configure tool chain decisions # if test "$solaris" = "yes" ; then - solinst=`which $install 2> /dev/null | /usr/bin/grep -v "no $install in"` - if test -z "$solinst" ; then + if has $install; then + : + else echo "Solaris install program not found. Use --install=/usr/ucb/install or" echo "install fileutils from www.blastwave.org using pkg-get -i fileutils" echo "to get ginstall which is used by default (which lives in /opt/csw/bin)" exit 1 fi - if test "$solinst" = "/usr/sbin/install" ; then + if test "`path_of $install`" = "/usr/sbin/install" ; then echo "Error: Solaris /usr/sbin/install is not an appropriate install program." echo "try ginstall from the GNU fileutils available from www.blastwave.org" echo "using pkg-get -i fileutils, or use --install=/usr/ucb/install" exit 1 fi - sol_ar=`which ar 2> /dev/null | /usr/bin/grep -v "no ar in"` - if test -z "$sol_ar" ; then + if has ar; then + : + else echo "Error: No path includes ar" if test -f /usr/ccs/bin/ar ; then echo "Add /usr/ccs/bin to your path and rerun configure" @@ -620,6 +983,7 @@ x86_64-softmmu \ arm-softmmu \ cris-softmmu \ m68k-softmmu \ +microblaze-softmmu \ mips-softmmu \ mipsel-softmmu \ mips64-softmmu \ @@ -630,6 +994,7 @@ ppc64-softmmu \ sh4-softmmu \ sh4eb-softmmu \ sparc-softmmu \ +sparc64-softmmu \ " fi # the following are Linux specific @@ -642,6 +1007,7 @@ arm-linux-user \ armeb-linux-user \ cris-linux-user \ m68k-linux-user \ +microblaze-linux-user \ mips-linux-user \ mipsel-linux-user \ ppc-linux-user \ @@ -661,6 +1027,9 @@ sparc32plus-linux-user \ # the following are BSD specific if [ "$bsd_user" = "yes" ] ; then target_list="${target_list}\ +i386-bsd-user \ +x86_64-bsd-user \ +sparc-bsd-user \ sparc64-bsd-user \ " fi @@ -671,6 +1040,23 @@ if test -z "$target_list" ; then echo "No targets enabled" exit 1 fi +# see if system emulation was really requested +case " $target_list " in + *"-softmmu "*) softmmu=yes + ;; + *) softmmu=no + ;; +esac + +feature_not_found() { + feature=$1 + + echo "ERROR" + echo "ERROR: User requested feature $feature" + echo "ERROR: configure was not able to find it" + echo "ERROR" + exit 1; +} if test -z "$cross_prefix" ; then @@ -684,7 +1070,7 @@ int main(int argc, char ** argv){ } EOF -if $cc $ARCH_CFLAGS -o $TMPE $TMPC > /dev/null 2> /dev/null ; then +if compile_prog "" "" ; then $TMPE && bigendian="yes" else echo big/little test failed @@ -693,39 +1079,30 @@ fi else # if cross compiling, cannot launch a program, so make a static guess -if test "$cpu" = "armv4b" \ - -o "$cpu" = "hppa" \ - -o "$cpu" = "m68k" \ - -o "$cpu" = "mips" \ - -o "$cpu" = "mips64" \ - -o "$cpu" = "ppc" \ - -o "$cpu" = "ppc64" \ - -o "$cpu" = "s390" \ - -o "$cpu" = "sparc" \ - -o "$cpu" = "sparc64"; then - bigendian="yes" -fi +case "$cpu" in + armv4b|hppa|m68k|mips|mips64|ppc|ppc64|s390|s390x|sparc|sparc64) + bigendian=yes + ;; +esac fi -# host long bits test -hostlongbits="32" -if test "$cpu" = "x86_64" \ - -o "$cpu" = "alpha" \ - -o "$cpu" = "ia64" \ - -o "$cpu" = "sparc64" \ - -o "$cpu" = "ppc64"; then - hostlongbits="64" +# host long bits test, actually a pointer size test +cat > $TMPC << EOF +int sizeof_pointer_is_8[sizeof(void *) == 8 ? 1 : -1]; +EOF +if compile_object; then +hostlongbits=64 +else +hostlongbits=32 fi -# check gcc options support -cat > $TMPC < $TMPC < $TMPC < #include void foo() @@ -736,10 +1113,14 @@ void foo() } EOF -if $cc $ARCH_CFLAGS -c -o $TMPO $TMPC > /dev/null 2> /dev/null ; then - : -else - nptl="no" + if compile_object ; then + nptl=yes + else + if test "$nptl" = "yes" ; then + feature_not_found "nptl" + fi + nptl=no + fi fi ########################################## @@ -749,7 +1130,7 @@ cat > $TMPC << EOF #include int main(void) { zlibVersion(); return 0; } EOF -if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $TMPC -lz > /dev/null 2> /dev/null ; then +if compile_prog "" "-lz" ; then : else echo @@ -760,54 +1141,116 @@ else fi ########################################## +# xen probe + +if test "$xen" != "no" ; then + xen_libs="-lxenstore -lxenctrl -lxenguest" + cat > $TMPC < +#include +int main(void) { xs_daemon_open(); xc_interface_open(); return 0; } +EOF + if compile_prog "" "$xen_libs" ; then + xen=yes + libs_softmmu="$xen_libs $libs_softmmu" + else + if test "$xen" = "yes" ; then + feature_not_found "xen" + fi + xen=no + fi +fi + +########################################## +# pkg-config probe + +if ! has $pkg_config; then + echo warning: proceeding without "$pkg_config" >&2 + pkg_config=/bin/false +fi + +########################################## +# Sparse probe +if test "$sparse" != "no" ; then + if has cgcc; then + sparse=yes + else + if test "$sparse" = "yes" ; then + feature_not_found "sparse" + fi + sparse=no + fi +fi + +########################################## # SDL probe -sdl_too_old=no +# Look for sdl configuration program (pkg-config or sdl-config). Try +# sdl-config even without cross prefix, and favour pkg-config over sdl-config. +if test "`basename $sdl_config`" != sdl-config && ! has ${sdl_config}; then + sdl_config=sdl-config +fi -if test -z "$sdl" ; then - sdl_config="sdl-config" - sdl=no - sdl_static=no +if $pkg_config sdl --modversion >/dev/null 2>&1; then + sdlconfig="$pkg_config sdl" + _sdlversion=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'` +elif has ${sdl_config}; then + sdlconfig="$sdl_config" + _sdlversion=`$sdlconfig --version | sed 's/[^0-9]//g'` +else + if test "$sdl" = "yes" ; then + feature_not_found "sdl" + fi + sdl=no +fi +if test -n "$cross_prefix" && test "`basename $sdlconfig`" = sdl-config; then + echo warning: using "\"$sdlconfig\"" to detect cross-compiled sdl >&2 +fi -cat > $TMPC << EOF +sdl_too_old=no +if test "$sdl" != "no" ; then + cat > $TMPC << EOF #include #undef main /* We don't want SDL to override our main() */ int main( void ) { return SDL_Init (SDL_INIT_VIDEO); } EOF - if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} `$sdl_config --cflags 2> /dev/null` $TMPC `$sdl_config --libs 2> /dev/null` > $TMPSDLLOG 2>&1 ; then - _sdlversion=`$sdl_config --version | sed 's/[^0-9]//g'` - if test "$_sdlversion" -lt 121 ; then - sdl_too_old=yes - else - if test "$cocoa" = "no" ; then - sdl=yes - fi - fi - - # static link with sdl ? - if test "$sdl" = "yes" ; then - aa="no" - `$sdl_config --static-libs 2>/dev/null | grep \\\-laa > /dev/null` && aa="yes" - sdl_static_libs=`$sdl_config --static-libs 2>/dev/null` - if [ "$aa" = "yes" ] ; then - sdl_static_libs="$sdl_static_libs `aalib-config --static-libs`" - fi + sdl_cflags=`$sdlconfig --cflags 2> /dev/null` + if test "$static" = "yes" ; then + sdl_libs=`$sdlconfig --static-libs 2>/dev/null` + else + sdl_libs=`$sdlconfig --libs 2> /dev/null` + fi + if compile_prog "$sdl_cflags" "$sdl_libs" ; then + if test "$_sdlversion" -lt 121 ; then + sdl_too_old=yes + else + if test "$cocoa" = "no" ; then + sdl=yes + fi + fi - if $cc -o $TMPE ${OS_CFLAGS} `$sdl_config --cflags 2> /dev/null` $TMPC $sdl_static_libs > /dev/null 2> /dev/null; then - sdl_static=yes - fi - fi # static link - fi # sdl compile test -else - # Make sure to disable cocoa if sdl was set + # static link with sdl ? (note: sdl.pc's --static --libs is broken) + if test "$sdl" = "yes" -a "$static" = "yes" ; then + if test $? = 0 && echo $sdl_libs | grep -- -laa > /dev/null; then + sdl_libs="$sdl_libs `aalib-config --static-libs 2>/dev/null`" + sdl_cflags="$sdl_cflags `aalib-config --cflags 2>/dev/null`" + fi + if compile_prog "$sdl_cflags" "$sdl_libs" ; then + : + else + sdl=no + fi + fi # static link + else # sdl not found if test "$sdl" = "yes" ; then - cocoa="no" - audio_drv_list="`echo $audio_drv_list | sed s,coreaudio,,g`" + feature_not_found "sdl" fi -fi # -z $sdl + sdl=no + fi # sdl compile test +fi if test "$sdl" = "yes" ; then -cat > $TMPC < $TMPC < #if defined(SDL_VIDEO_DRIVER_X11) #include @@ -816,31 +1259,169 @@ cat > $TMPC < /dev/null` $TMPC `$sdl_config --libs 2> /dev/null` > /dev/null 2>&1 ; then - sdl_x11="yes" - fi + if compile_prog "$sdl_cflags" "$sdl_libs" ; then + sdl_libs="$sdl_libs -lX11" + fi + if test "$mingw32" = "yes" ; then + sdl_libs="`echo $sdl_libs | sed s/-mwindows//g` -mconsole" + fi + libs_softmmu="$sdl_libs $libs_softmmu" fi ########################################## # VNC TLS detection -if test "$vnc_tls" = "yes" ; then -cat > $TMPC < $TMPC < int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0; } EOF - vnc_tls_cflags=`pkg-config --cflags gnutls 2> /dev/null` - vnc_tls_libs=`pkg-config --libs gnutls 2> /dev/null` - if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $vnc_tls_cflags $TMPC \ - $vnc_tls_libs > /dev/null 2> /dev/null ; then - : - else - vnc_tls="no" + vnc_tls_cflags=`$pkg_config --cflags gnutls 2> /dev/null` + vnc_tls_libs=`$pkg_config --libs gnutls 2> /dev/null` + if compile_prog "$vnc_tls_cflags" "$vnc_tls_libs" ; then + vnc_tls=yes + libs_softmmu="$vnc_tls_libs $libs_softmmu" + else + if test "$vnc_tls" = "yes" ; then + feature_not_found "vnc-tls" + fi + vnc_tls=no + fi +fi + +########################################## +# VNC SASL detection +if test "$vnc_sasl" != "no" ; then + cat > $TMPC < +#include +int main(void) { sasl_server_init(NULL, "qemu"); return 0; } +EOF + # Assuming Cyrus-SASL installed in /usr prefix + vnc_sasl_cflags="" + vnc_sasl_libs="-lsasl2" + if compile_prog "$vnc_sasl_cflags" "$vnc_sasl_libs" ; then + vnc_sasl=yes + libs_softmmu="$vnc_sasl_libs $libs_softmmu" + else + if test "$vnc_sasl" = "yes" ; then + feature_not_found "vnc-sasl" + fi + vnc_sasl=no + fi +fi + +########################################## +# VNC JPEG detection +if test "$vnc_jpeg" != "no" ; then +cat > $TMPC < +#include +int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; } +EOF + vnc_jpeg_cflags="" + vnc_jpeg_libs="-ljpeg" + if compile_prog "$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then + vnc_jpeg=yes + libs_softmmu="$vnc_jpeg_libs $libs_softmmu" + else + if test "$vnc_jpeg" = "yes" ; then + feature_not_found "vnc-jpeg" + fi + vnc_jpeg=no + fi +fi + +########################################## +# VNC PNG detection +if test "$vnc_png" != "no" ; then +cat > $TMPC < +#include +#include +int main(void) { + png_structp png_ptr; + png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL); + return 0; +} +EOF + vnc_png_cflags="" + vnc_png_libs="-lpng" + if compile_prog "$vnc_png_cflags" "$vnc_png_libs" ; then + vnc_png=yes + libs_softmmu="$vnc_png_libs $libs_softmmu" + else + if test "$vnc_png" = "yes" ; then + feature_not_found "vnc-png" + fi + vnc_png=no + fi +fi + +########################################## +# fnmatch() probe, used for ACL routines +fnmatch="no" +cat > $TMPC << EOF +#include +int main(void) +{ + fnmatch("foo", "foo", 0); + return 0; +} +EOF +if compile_prog "" "" ; then + fnmatch="yes" +fi + +########################################## +# uuid_generate() probe, used for vdi block driver +if test "$uuid" != "no" ; then + uuid_libs="-luuid" + cat > $TMPC << EOF +#include +int main(void) +{ + uuid_t my_uuid; + uuid_generate(my_uuid); + return 0; +} +EOF + if compile_prog "" "$uuid_libs" ; then + uuid="yes" + libs_softmmu="$uuid_libs $libs_softmmu" + libs_tools="$uuid_libs $libs_tools" + else + if test "$uuid" = "yes" ; then + feature_not_found "uuid" + fi + uuid=no + fi +fi + +########################################## +# xfsctl() probe, used for raw-posix +if test "$xfs" != "no" ; then + cat > $TMPC << EOF +#include +int main(void) +{ + xfsctl(NULL, 0, 0, NULL); + return 0; +} +EOF + if compile_prog "" "" ; then + xfs="yes" + else + if test "$xfs" = "yes" ; then + feature_not_found "xfs" fi + xfs=no + fi fi ########################################## # vde libraries probe -if test "$vde" = "yes" ; then +if test "$vde" != "no" ; then + vde_libs="-lvdeplug" cat > $TMPC << EOF #include int main(void) @@ -850,11 +1431,16 @@ int main(void) return 0; } EOF - if $cc $ARCH_CFLAGS -o $TMPE $TMPC -lvdeplug > /dev/null 2> /dev/null ; then - : - else - vde="no" + if compile_prog "" "$vde_libs" ; then + vde=yes + libs_softmmu="$vde_libs $libs_softmmu" + libs_tools="$vde_libs $libs_tools" + else + if test "$vde" = "yes" ; then + feature_not_found "vde" fi + vde=no + fi fi ########################################## @@ -871,7 +1457,7 @@ audio_drv_probe() #include <$hdr> int main(void) { $exp } EOF - if $cc $ARCH_CFLAGS $cfl -o $TMPE $TMPC $lib > /dev/null 2> /dev/null ; then + if compile_prog "$cfl" "$lib" ; then : else echo @@ -888,6 +1474,7 @@ for drv in $audio_drv_list; do alsa) audio_drv_probe $drv alsa/asoundlib.h -lasound \ "snd_pcm_t **handle; return snd_pcm_close(*handle);" + libs_softmmu="-lasound $libs_softmmu" ;; fmod) @@ -899,21 +1486,44 @@ for drv in $audio_drv_list; do exit 1 fi audio_drv_probe $drv fmod.h $fmod_lib "return FSOUND_GetVersion();" "-I $fmod_inc" + libs_softmmu="$fmod_lib $libs_softmmu" ;; esd) audio_drv_probe $drv esd.h -lesd 'return esd_play_stream(0, 0, "", 0);' + libs_softmmu="-lesd $libs_softmmu" + audio_pt_int="yes" ;; pa) - audio_drv_probe $drv pulse/simple.h -lpulse-simple \ + audio_drv_probe $drv pulse/simple.h "-lpulse-simple -lpulse" \ "pa_simple *s = NULL; pa_simple_free(s); return 0;" + libs_softmmu="-lpulse -lpulse-simple $libs_softmmu" + audio_pt_int="yes" + ;; + + coreaudio) + libs_softmmu="-framework CoreAudio $libs_softmmu" + ;; + + dsound) + libs_softmmu="-lole32 -ldxguid $libs_softmmu" + audio_win_int="yes" + ;; + + oss) + libs_softmmu="$oss_lib $libs_softmmu" ;; - oss|sdl|core|wav|dsound) + sdl|wav) # XXX: Probes for CoreAudio, DirectSound, SDL(?) ;; + winwave) + libs_softmmu="-lwinmm $libs_softmmu" + audio_win_int="yes" + ;; + *) echo "$audio_possible_drivers" | grep -q "\<$drv\>" || { echo @@ -929,68 +1539,155 @@ done ########################################## # BrlAPI probe -if test -z "$brlapi" ; then - brlapi=no -cat > $TMPC << EOF +if test "$brlapi" != "no" ; then + brlapi_libs="-lbrlapi" + cat > $TMPC << EOF #include +#include int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); } EOF - if $cc ${ARCH_CFLAGS} -o $TMPE ${OS_CFLAGS} $TMPC -lbrlapi > /dev/null 2> /dev/null ; then - brlapi=yes - fi # brlapi compile test -fi # -z $brlapi + if compile_prog "" "$brlapi_libs" ; then + brlapi=yes + libs_softmmu="$brlapi_libs $libs_softmmu" + else + if test "$brlapi" = "yes" ; then + feature_not_found "brlapi" + fi + brlapi=no + fi +fi ########################################## # curses probe +curses_list="-lncurses -lcurses" -if test "$curses" = "yes" ; then - curses=no +if test "$curses" != "no" ; then + curses_found=no cat > $TMPC << EOF #include -int main(void) { return curses_version(); } +#ifdef __OpenBSD__ +#define resize_term resizeterm +#endif +int main(void) { resize_term(0, 0); return curses_version(); } EOF - if $cc $ARCH_CFLAGS -o $TMPE $TMPC -lcurses > /dev/null 2> /dev/null ; then + for curses_lib in $curses_list; do + if compile_prog "" "$curses_lib" ; then + curses_found=yes + libs_softmmu="$curses_lib $libs_softmmu" + break + fi + done + if test "$curses_found" = "yes" ; then curses=yes + else + if test "$curses" = "yes" ; then + feature_not_found "curses" + fi + curses=no fi -fi # test "$curses" +fi ########################################## -# bluez support probe -if test "$bluez" = "yes" ; then - `pkg-config bluez` || bluez="no" +# curl probe + +if $pkg_config libcurl --modversion >/dev/null 2>&1; then + curlconfig="$pkg_config libcurl" +else + curlconfig=curl-config fi -if test "$bluez" = "yes" ; then + +if test "$curl" != "no" ; then + cat > $TMPC << EOF +#include +int main(void) { return curl_easy_init(); } +EOF + curl_cflags=`$curlconfig --cflags 2>/dev/null` + curl_libs=`$curlconfig --libs 2>/dev/null` + if compile_prog "$curl_cflags" "$curl_libs" ; then + curl=yes + libs_tools="$curl_libs $libs_tools" + libs_softmmu="$curl_libs $libs_softmmu" + else + if test "$curl" = "yes" ; then + feature_not_found "curl" + fi + curl=no + fi +fi # test "$curl" + +########################################## +# check framework probe + +if test "$check_utests" != "no" ; then + cat > $TMPC << EOF +#include +int main(void) { suite_create("qemu test"); return 0; } +EOF + check_libs=`$pkg_config --libs check` + if compile_prog "" $check_libs ; then + check_utests=yes + libs_tools="$check_libs $libs_tools" + else + if test "$check_utests" = "yes" ; then + feature_not_found "check" + fi + check_utests=no + fi +fi # test "$check_utests" + +########################################## +# bluez support probe +if test "$bluez" != "no" ; then cat > $TMPC << EOF #include int main(void) { return bt_error(0); } EOF - bluez_cflags=`pkg-config --cflags bluez` - bluez_libs=`pkg-config --libs bluez` - if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $bluez_cflags $TMPC \ - $bluez_libs > /dev/null 2> /dev/null ; then - : + bluez_cflags=`$pkg_config --cflags bluez 2> /dev/null` + bluez_libs=`$pkg_config --libs bluez 2> /dev/null` + if compile_prog "$bluez_cflags" "$bluez_libs" ; then + bluez=yes + libs_softmmu="$bluez_libs $libs_softmmu" else + if test "$bluez" = "yes" ; then + feature_not_found "bluez" + fi bluez="no" fi fi ########################################## # kvm probe -if test "$kvm" = "yes" ; then +if test "$kvm" != "no" ; then cat > $TMPC < #if !defined(KVM_API_VERSION) || KVM_API_VERSION < 12 || KVM_API_VERSION > 12 #error Invalid KVM version #endif -#if !defined(KVM_CAP_USER_MEMORY) -#error Missing KVM capability KVM_CAP_USER_MEMORY -#endif -#if !defined(KVM_CAP_SET_TSS_ADDR) -#error Missing KVM capability KVM_CAP_SET_TSS_ADDR -#endif -#if !defined(KVM_CAP_DESTROY_MEMORY_REGION_WORKS) -#error Missing KVM capability KVM_CAP_DESTROY_MEMORY_REGION_WORKS +EOF + must_have_caps="KVM_CAP_USER_MEMORY \ + KVM_CAP_DESTROY_MEMORY_REGION_WORKS \ + KVM_CAP_COALESCED_MMIO \ + KVM_CAP_SYNC_MMU \ + " + if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) ; then + must_have_caps="$caps \ + KVM_CAP_SET_TSS_ADDR \ + KVM_CAP_EXT_CPUID \ + KVM_CAP_CLOCKSOURCE \ + KVM_CAP_NOP_IO_DELAY \ + KVM_CAP_PV_MMU \ + KVM_CAP_MP_STATE \ + KVM_CAP_USER_NMI \ + " + fi + for c in $must_have_caps ; do + cat >> $TMPC <> $TMPC </dev/null` fi - if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $kvm_cflags $TMPC \ - > /dev/null 2>/dev/null ; then - : + if compile_prog "$kvm_cflags" "" ; then + kvm=yes + cat > $TMPC < +int main(void) { return 0; } +EOF + if compile_prog "$kvm_cflags" "" ; then + kvm_para=yes + fi else - kvm="no"; - if [ -x "`which awk 2>/dev/null`" ] && \ - [ -x "`which grep 2>/dev/null`" ]; then - kvmerr=`LANG=C $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $kvm_cflags $TMPC 2>&1 \ + if test "$kvm" = "yes" ; then + if has awk && has grep; then + kvmerr=`LANG=C $cc $QEMU_CFLAGS -o $TMPE $kvm_cflags $TMPC 2>&1 \ | grep "error: " \ | awk -F "error: " '{if (NR>1) printf(", "); printf("%s",$2);}'` - if test "$kvmerr" != "" ; then - kvm="no - (${kvmerr})" + if test "$kvmerr" != "" ; then + echo -e "${kvmerr}\n\ +NOTE: To enable KVM support, update your kernel to 2.6.29+ or install \ +recent kvm-kmod from http://sourceforge.net/projects/kvm." + fi fi + feature_not_found "kvm" fi + kvm=no fi fi ########################################## -# AIO probe -AIOLIBS="" +# test for vhost net -if test "$aio" = "yes" ; then - aio=no - cat > $TMPC << EOF +if test "$vhost_net" != "no"; then + if test "$kvm" != "no"; then + cat > $TMPC < + int main(void) { return 0; } +EOF + if compile_prog "$kvm_cflags" "" ; then + vhost_net=yes + else + if test "$vhost_net" = "yes" ; then + feature_not_found "vhost-net" + fi + vhost_net=no + fi + else + if test "$vhost_net" = "yes" ; then + echo "NOTE: vhost-net feature requires KVM (--enable-kvm)." + feature_not_found "vhost-net" + fi + vhost_net=no + fi +fi + +########################################## +# pthread probe +PTHREADLIBS_LIST="-lpthread -lpthreadGC2" + +pthread=no +cat > $TMPC << EOF #include -int main(void) { pthread_mutex_t lock; return 0; } +int main(void) { pthread_create(0,0,0,0); return 0; } +EOF +if compile_prog "" "" ; then + pthread=yes +else + for pthread_lib in $PTHREADLIBS_LIST; do + if compile_prog "" "$pthread_lib" ; then + pthread=yes + LIBS="$pthread_lib $LIBS" + break + fi + done +fi + +if test "$mingw32" != yes -a "$pthread" = no; then + echo + echo "Error: pthread check failed" + echo "Make sure to have the pthread libs and headers installed." + echo + exit 1 +fi + +########################################## +# rbd probe +if test "$rbd" != "no" ; then + cat > $TMPC < +#include +int main(void) { rados_initialize(0, NULL); return 0; } +EOF + rbd_libs="-lrados -lcrypto" + if compile_prog "" "$rbd_libs" ; then + librados_too_old=no + cat > $TMPC < +#include +#ifndef CEPH_OSD_TMAP_SET +#error missing CEPH_OSD_TMAP_SET +#endif +int main(void) { + int (*func)(const rados_pool_t pool, uint64_t *snapid) = rados_selfmanaged_snap_create; + rados_initialize(0, NULL); + return 0; +} +EOF + if compile_prog "" "$rbd_libs" ; then + rbd=yes + libs_tools="$rbd_libs $libs_tools" + libs_softmmu="$rbd_libs $libs_softmmu" + else + rbd=no + librados_too_old=yes + fi + else + if test "$rbd" = "yes" ; then + feature_not_found "rados block device" + fi + rbd=no + fi + if test "$librados_too_old" = "yes" ; then + echo "-> Your librados version is too old - upgrade needed to have rbd support" + fi +fi + +########################################## +# linux-aio probe + +if test "$linux_aio" != "no" ; then + cat > $TMPC < +#include +#include +int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; } +EOF + if compile_prog "" "-laio" ; then + linux_aio=yes + libs_softmmu="$libs_softmmu -laio" + libs_tools="$libs_tools -laio" + else + if test "$linux_aio" = "yes" ; then + feature_not_found "linux AIO" + fi + linux_aio=no + fi +fi + +########################################## +# attr probe + +if test "$attr" != "no" ; then + cat > $TMPC < +#include +#include +int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; } EOF - if $cc $ARCH_CFLAGS -o $TMPE $AIOLIBS $TMPC 2> /dev/null ; then - aio=yes - AIOLIBS="-lpthread" + if compile_prog "" "-lattr" ; then + attr=yes + LIBS="-lattr $LIBS" + else + if test "$attr" = "yes" ; then + feature_not_found "ATTR" + fi + attr=no fi fi @@ -1048,26 +1881,293 @@ cat > $TMPC < /dev/null 2> /dev/null ; then +if compile_prog "" "" ; then iovec=yes fi ########################################## +# preadv probe +cat > $TMPC < +#include +#include +int main(void) { preadv; } +EOF +preadv=no +if compile_prog "" "" ; then + preadv=yes +fi + +########################################## # fdt probe -if test "$fdt" = "yes" ; then - fdt=no - cat > $TMPC << EOF +if test "$fdt" != "no" ; then + fdt_libs="-lfdt" + cat > $TMPC << EOF int main(void) { return 0; } EOF - if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $TMPC -lfdt 2> /dev/null ; then + if compile_prog "" "$fdt_libs" ; then fdt=yes + libs_softmmu="$fdt_libs $libs_softmmu" + else + if test "$fdt" = "yes" ; then + feature_not_found "fdt" + fi + fdt=no fi fi +# +# Check for xxxat() functions when we are building linux-user +# emulator. This is done because older glibc versions don't +# have syscall stubs for these implemented. +# +atfile=no +cat > $TMPC << EOF +#define _ATFILE_SOURCE +#include +#include +#include + +int +main(void) +{ + /* try to unlink nonexisting file */ + return (unlinkat(AT_FDCWD, "nonexistent_file", 0)); +} +EOF +if compile_prog "" "" ; then + atfile=yes +fi + +# Check for inotify functions when we are building linux-user +# emulator. This is done because older glibc versions don't +# have syscall stubs for these implemented. In that case we +# don't provide them even if kernel supports them. +# +inotify=no +cat > $TMPC << EOF +#include + +int +main(void) +{ + /* try to start inotify */ + return inotify_init(); +} +EOF +if compile_prog "" "" ; then + inotify=yes +fi + +inotify1=no +cat > $TMPC << EOF +#include + +int +main(void) +{ + /* try to start inotify */ + return inotify_init1(0); +} +EOF +if compile_prog "" "" ; then + inotify1=yes +fi + +# check if utimensat and futimens are supported +utimens=no +cat > $TMPC << EOF +#define _ATFILE_SOURCE +#include +#include + +int main(void) +{ + utimensat(AT_FDCWD, "foo", NULL, 0); + futimens(0, NULL); + return 0; +} +EOF +if compile_prog "" "" ; then + utimens=yes +fi + +# check if pipe2 is there +pipe2=no +cat > $TMPC << EOF +#include +#include + +int main(void) +{ + int pipefd[2]; + pipe2(pipefd, O_CLOEXEC); + return 0; +} +EOF +if compile_prog "" "" ; then + pipe2=yes +fi + +# check if accept4 is there +accept4=no +cat > $TMPC << EOF +#include +#include + +int main(void) +{ + accept4(0, NULL, NULL, SOCK_CLOEXEC); + return 0; +} +EOF +if compile_prog "" "" ; then + accept4=yes +fi + +# check if tee/splice is there. vmsplice was added same time. +splice=no +cat > $TMPC << EOF +#include +#include +#include + +int main(void) +{ + int len, fd; + len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK); + splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE); + return 0; +} +EOF +if compile_prog "" "" ; then + splice=yes +fi + +########################################## +# signalfd probe +signalfd="no" +cat > $TMPC << EOF +#define _GNU_SOURCE +#include +#include +#include +int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); } +EOF + +if compile_prog "" "" ; then + signalfd=yes +fi + +# check if eventfd is supported +eventfd=no +cat > $TMPC << EOF +#include + +int main(void) +{ + int efd = eventfd(0, 0); + return 0; +} +EOF +if compile_prog "" "" ; then + eventfd=yes +fi + +# check for fallocate +fallocate=no +cat > $TMPC << EOF +#include + +int main(void) +{ + fallocate(0, 0, 0, 0); + return 0; +} +EOF +if compile_prog "$ARCH_CFLAGS" "" ; then + fallocate=yes +fi + +# check for sync_file_range +sync_file_range=no +cat > $TMPC << EOF +#include + +int main(void) +{ + sync_file_range(0, 0, 0, 0); + return 0; +} +EOF +if compile_prog "$ARCH_CFLAGS" "" ; then + sync_file_range=yes +fi + +# check for linux/fiemap.h and FS_IOC_FIEMAP +fiemap=no +cat > $TMPC << EOF +#include +#include +#include + +int main(void) +{ + ioctl(0, FS_IOC_FIEMAP, 0); + return 0; +} +EOF +if compile_prog "$ARCH_CFLAGS" "" ; then + fiemap=yes +fi + +# check for dup3 +dup3=no +cat > $TMPC << EOF +#include + +int main(void) +{ + dup3(0, 0, 0); + return 0; +} +EOF +if compile_prog "" "" ; then + dup3=yes +fi + # Check if tools are available to build documentation. -if [ -x "`which texi2html 2>/dev/null`" ] && \ - [ -x "`which pod2man 2>/dev/null`" ]; then - build_docs="yes" +if test "$docs" != "no" ; then + if has makeinfo && has pod2man; then + docs=yes + else + if test "$docs" = "yes" ; then + feature_not_found "docs" + fi + docs=no + fi +fi + +# Search for bswap_32 function +byteswap_h=no +cat > $TMPC << EOF +#include +int main(void) { return bswap_32(0); } +EOF +if compile_prog "" "" ; then + byteswap_h=yes +fi + +# Search for bswap_32 function +bswap_h=no +cat > $TMPC << EOF +#include +#include +#include +int main(void) { return bswap32(0); } +EOF +if compile_prog "" "" ; then + bswap_h=yes fi ########################################## @@ -1078,54 +2178,250 @@ cat > $TMPC < /dev/null 2> /dev/null ; then +if compile_prog "" "" ; then : -elif $cc $ARCH_CFLAGS -o $TMPE $TMPC -lrt > /dev/null 2> /dev/null ; then - rt=yes +elif compile_prog "" "-lrt" ; then + LIBS="-lrt $LIBS" fi -if test "$rt" = "yes" ; then - # Hack, we should have a general purpose LIBS for this sort of thing - AIOLIBS="$AIOLIBS -lrt" +if test "$darwin" != "yes" -a "$mingw32" != "yes" -a "$solaris" != yes -a \ + "$aix" != "yes" -a "$haiku" != "yes" ; then + libs_softmmu="-lutil $libs_softmmu" fi -if test "$mingw32" = "yes" ; then - if test -z "$prefix" ; then - prefix="c:\\\\Program Files\\\\Qemu" +########################################## +# check if the compiler defines offsetof + +need_offsetof=yes +cat > $TMPC << EOF +#include +int main(void) { struct s { int f; }; return offsetof(struct s, f); } +EOF +if compile_prog "" "" ; then + need_offsetof=no +fi + +########################################## +# check if the compiler understands attribute warn_unused_result +# +# This could be smarter, but gcc -Werror does not error out even when warning +# about attribute warn_unused_result + +gcc_attribute_warn_unused_result=no +cat > $TMPC << EOF +#if defined(__GNUC__) && (__GNUC__ < 4) && defined(__GNUC_MINOR__) && (__GNUC__ < 4) +#error gcc 3.3 or older +#endif +int main(void) { return 0;} +EOF +if compile_prog "" ""; then + gcc_attribute_warn_unused_result=yes +fi + +# spice probe +if test "$spice" != "no" ; then + cat > $TMPC << EOF +#include +int main(void) { spice_server_new(); return 0; } +EOF + spice_cflags=$($pkg_config --cflags spice-protocol spice-server 2>/dev/null) + spice_libs=$($pkg_config --libs spice-protocol spice-server 2>/dev/null) + if $pkg_config --atleast-version=0.5.3 spice-server >/dev/null 2>&1 && \ + compile_prog "$spice_cflags" "$spice_libs" ; then + spice="yes" + libs_softmmu="$libs_softmmu $spice_libs" + QEMU_CFLAGS="$QEMU_CFLAGS $spice_cflags" + else + if test "$spice" = "yes" ; then + feature_not_found "spice" + fi + spice="no" fi - mansuffix="" - datasuffix="" - docsuffix="" - binsuffix="" -else - if test -z "$prefix" ; then - prefix="/usr/local" +fi + +########################################## + +########################################## +# check if we have fdatasync + +fdatasync=no +cat > $TMPC << EOF +#include +int main(void) { return fdatasync(0); } +EOF +if compile_prog "" "" ; then + fdatasync=yes +fi + +########################################## +# check if we have madvise + +madvise=no +cat > $TMPC << EOF +#include +#include +#include +int main(void) { return madvise(NULL, 0, MADV_DONTNEED); } +EOF +if compile_prog "" "" ; then + madvise=yes +fi + +########################################## +# check if we have posix_madvise + +posix_madvise=no +cat > $TMPC << EOF +#include +#include +int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); } +EOF +if compile_prog "" "" ; then + posix_madvise=yes +fi + +########################################## +# check if trace backend exists + +sh "$source_path/scripts/tracetool" "--$trace_backend" --check-backend > /dev/null 2> /dev/null +if test "$?" -ne 0 ; then + echo + echo "Error: invalid trace backend" + echo "Please choose a supported trace backend." + echo + exit 1 +fi + +########################################## +# For 'ust' backend, test if ust headers are present +if test "$trace_backend" = "ust"; then + cat > $TMPC << EOF +#include +#include +int main(void) { return 0; } +EOF + if compile_prog "" "" ; then + LIBS="-lust $LIBS" + else + echo + echo "Error: Trace backend 'ust' missing libust header files" + echo + exit 1 + fi +fi + +########################################## +# For 'dtrace' backend, test if 'dtrace' command is present +if test "$trace_backend" = "dtrace"; then + if ! has 'dtrace' ; then + echo + echo "Error: dtrace command is not found in PATH $PATH" + echo + exit 1 + fi + trace_backend_stap="no" + if has 'stap' ; then + trace_backend_stap="yes" + fi +fi + +########################################## +# End of CC checks +# After here, no more $cc or $ld runs + +if test "$debug" = "no" ; then + CFLAGS="-O2 $CFLAGS" +fi + +# Consult white-list to determine whether to enable werror +# by default. Only enable by default for git builds +z_version=`cut -f3 -d. $source_path/VERSION` + +if test -z "$werror" ; then + if test "$z_version" = "50" -a \ + "$linux" = "yes" ; then + werror="yes" + else + werror="no" + fi +fi + +# Disable zero malloc errors for official releases unless explicitly told to +# enable/disable +if test -z "$zero_malloc" ; then + if test "$z_version" = "50" ; then + zero_malloc="no" + else + zero_malloc="yes" + fi +fi + +if test "$werror" = "yes" ; then + QEMU_CFLAGS="-Werror $QEMU_CFLAGS" +fi + +if test "$solaris" = "no" ; then + if $ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then + LDFLAGS="-Wl,--warn-common $LDFLAGS" + fi +fi + +# Use ASLR, no-SEH and DEP if available +if test "$mingw32" = "yes" ; then + for flag in --dynamicbase --no-seh --nxcompat; do + if $ld --help 2>/dev/null | grep ".$flag" >/dev/null 2>/dev/null ; then + LDFLAGS="-Wl,$flag $LDFLAGS" + fi + done +fi + +confdir=$sysconfdir$confsuffix + +tools= +if test "$softmmu" = yes ; then + tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools" + if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then + tools="qemu-nbd\$(EXESUF) $tools" + if [ "$check_utests" = "yes" ]; then + tools="check-qint check-qstring check-qdict check-qlist $tools" + tools="check-qfloat check-qjson $tools" + fi fi - mansuffix="/share/man" - datasuffix="/share/qemu" - docsuffix="/share/doc/qemu" - binsuffix="/bin" fi +# Mac OS X ships with a broken assembler +roms= +if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) -a \ + "$targetos" != "Darwin" -a "$targetos" != "SunOS" -a \ + "$softmmu" = yes ; then + roms="optionrom" +fi + + echo "Install prefix $prefix" -echo "BIOS directory $prefix$datasuffix" -echo "binary directory $prefix$binsuffix" +echo "BIOS directory `eval echo $datadir`" +echo "binary directory `eval echo $bindir`" +echo "config directory `eval echo $sysconfdir`" if test "$mingw32" = "no" ; then -echo "Manual directory $prefix$mansuffix" +echo "Manual directory `eval echo $mandir`" echo "ELF interp prefix $interp_prefix" fi echo "Source path $source_path" echo "C compiler $cc" echo "Host C compiler $host_cc" -echo "ARCH_CFLAGS $ARCH_CFLAGS" +echo "CFLAGS $CFLAGS" +echo "QEMU_CFLAGS $QEMU_CFLAGS" +echo "LDFLAGS $LDFLAGS" echo "make $make" echo "install $install" echo "host CPU $cpu" echo "host big endian $bigendian" echo "target list $target_list" +echo "tcg debug enabled $debug_tcg" +echo "Mon debug enabled $debug_mon" echo "gprof enabled $gprof" echo "sparse enabled $sparse" +echo "strip binaries $strip_opt" echo "profiler $profiler" echo "static build $static" echo "-Werror enabled $werror" @@ -1133,398 +2429,453 @@ if test "$darwin" = "yes" ; then echo "Cocoa support $cocoa" fi echo "SDL support $sdl" -if test "$sdl" != "no" ; then - echo "SDL static link $sdl_static" -fi echo "curses support $curses" +echo "curl support $curl" +echo "check support $check_utests" echo "mingw32 support $mingw32" echo "Audio drivers $audio_drv_list" echo "Extra audio cards $audio_card_list" +echo "Block whitelist $block_drv_whitelist" echo "Mixer emulation $mixemu" echo "VNC TLS support $vnc_tls" -if test "$vnc_tls" = "yes" ; then - echo " TLS CFLAGS $vnc_tls_cflags" - echo " TLS LIBS $vnc_tls_libs" -fi +echo "VNC SASL support $vnc_sasl" +echo "VNC JPEG support $vnc_jpeg" +echo "VNC PNG support $vnc_png" +echo "VNC thread $vnc_thread" if test -n "$sparc_cpu"; then echo "Target Sparc Arch $sparc_cpu" fi -echo "kqemu support $kqemu" +echo "xen support $xen" echo "brlapi support $brlapi" -echo "Documentation $build_docs" +echo "bluez support $bluez" +echo "Documentation $docs" [ ! -z "$uname_release" ] && \ echo "uname -r $uname_release" echo "NPTL support $nptl" +echo "GUEST_BASE $guest_base" +echo "PIE user targets $user_pie" echo "vde support $vde" -echo "AIO support $aio" +echo "IO thread $io_thread" +echo "Linux AIO support $linux_aio" +echo "ATTR/XATTR support $attr" echo "Install blobs $blobs" echo "KVM support $kvm" echo "fdt support $fdt" +echo "preadv support $preadv" +echo "fdatasync $fdatasync" +echo "madvise $madvise" +echo "posix_madvise $posix_madvise" +echo "uuid support $uuid" +echo "vhost-net support $vhost_net" +echo "Trace backend $trace_backend" +echo "Trace output file $trace_file-" +echo "spice support $spice" +echo "rbd support $rbd" +echo "xfsctl support $xfs" if test $sdl_too_old = "yes"; then echo "-> Your SDL version is too old - please upgrade to have SDL support" fi -if [ -s $TMPSDLLOG ]; then - echo "The error log from compiling the libSDL test is: " - cat $TMPSDLLOG -fi -#if test "$sdl_static" = "no"; then -# echo "WARNING: cannot compile statically with SDL - qemu-fast won't have a graphical output" -#fi -config_mak="config-host.mak" -config_h="config-host.h" - -#echo "Creating $config_mak and $config_h" - -test -f $config_h && mv $config_h ${config_h}~ - -echo "# Automatically generated by configure - do not modify" > $config_mak -printf "# Configured with:" >> $config_mak -printf " '%s'" "$0" "$@" >> $config_mak -echo >> $config_mak -echo "/* Automatically generated by configure - do not modify */" > $config_h - -echo "prefix=$prefix" >> $config_mak -echo "bindir=\${prefix}$binsuffix" >> $config_mak -echo "mandir=\${prefix}$mansuffix" >> $config_mak -echo "datadir=\${prefix}$datasuffix" >> $config_mak -echo "docdir=\${prefix}$docsuffix" >> $config_mak -echo "#define CONFIG_QEMU_SHAREDIR \"$prefix$datasuffix\"" >> $config_h -echo "MAKE=$make" >> $config_mak -echo "INSTALL=$install" >> $config_mak -echo "CC=$cc" >> $config_mak -echo "HOST_CC=$host_cc" >> $config_mak -echo "AR=$ar" >> $config_mak -echo "STRIP=$strip -s -R .comment -R .note" >> $config_mak -# XXX: only use CFLAGS and LDFLAGS ? -# XXX: should export HOST_CFLAGS and HOST_LDFLAGS for cross -# compilation of dyngen tool (useful for win32 build on Linux host) -echo "OS_CFLAGS=$OS_CFLAGS" >> $config_mak -echo "OS_LDFLAGS=$OS_LDFLAGS" >> $config_mak -echo "ARCH_CFLAGS=$ARCH_CFLAGS" >> $config_mak -echo "ARCH_LDFLAGS=$ARCH_LDFLAGS" >> $config_mak -echo "CFLAGS=$CFLAGS" >> $config_mak -echo "LDFLAGS=$LDFLAGS" >> $config_mak -echo "EXESUF=$EXESUF" >> $config_mak -echo "AIOLIBS=$AIOLIBS" >> $config_mak + +config_host_mak="config-host.mak" +config_host_ld="config-host.ld" + +echo "# Automatically generated by configure - do not modify" > $config_host_mak +printf "# Configured with:" >> $config_host_mak +printf " '%s'" "$0" "$@" >> $config_host_mak +echo >> $config_host_mak + +echo all: >> $config_host_mak +echo "prefix=$prefix" >> $config_host_mak +echo "bindir=$bindir" >> $config_host_mak +echo "mandir=$mandir" >> $config_host_mak +echo "datadir=$datadir" >> $config_host_mak +echo "sysconfdir=$sysconfdir" >> $config_host_mak +echo "docdir=$docdir" >> $config_host_mak +echo "confdir=$confdir" >> $config_host_mak + case "$cpu" in - i386) - echo "ARCH=i386" >> $config_mak - echo "#define HOST_I386 1" >> $config_h - ;; - x86_64) - echo "ARCH=x86_64" >> $config_mak - echo "#define HOST_X86_64 1" >> $config_h - ;; - alpha) - echo "ARCH=alpha" >> $config_mak - echo "#define HOST_ALPHA 1" >> $config_h - ;; - armv4b) - echo "ARCH=arm" >> $config_mak - echo "#define HOST_ARM 1" >> $config_h - ;; - armv4l) - echo "ARCH=arm" >> $config_mak - echo "#define HOST_ARM 1" >> $config_h - ;; - cris) - echo "ARCH=cris" >> $config_mak - echo "#define HOST_CRIS 1" >> $config_h - ;; - hppa) - echo "ARCH=hppa" >> $config_mak - echo "#define HOST_HPPA 1" >> $config_h - ;; - ia64) - echo "ARCH=ia64" >> $config_mak - echo "#define HOST_IA64 1" >> $config_h - ;; - m68k) - echo "ARCH=m68k" >> $config_mak - echo "#define HOST_M68K 1" >> $config_h - ;; - mips) - echo "ARCH=mips" >> $config_mak - echo "#define HOST_MIPS 1" >> $config_h - ;; - mips64) - echo "ARCH=mips64" >> $config_mak - echo "#define HOST_MIPS64 1" >> $config_h - ;; - ppc) - echo "ARCH=ppc" >> $config_mak - echo "#define HOST_PPC 1" >> $config_h - ;; - ppc64) - echo "ARCH=ppc64" >> $config_mak - echo "#define HOST_PPC64 1" >> $config_h - ;; - s390) - echo "ARCH=s390" >> $config_mak - echo "#define HOST_S390 1" >> $config_h - ;; - sparc) - echo "ARCH=sparc" >> $config_mak - echo "#define HOST_SPARC 1" >> $config_h + i386|x86_64|alpha|cris|hppa|ia64|m68k|microblaze|mips|mips64|ppc|ppc64|s390|s390x|sparc|sparc64) + ARCH=$cpu ;; - sparc64) - echo "ARCH=sparc64" >> $config_mak - echo "#define HOST_SPARC64 1" >> $config_h - ;; - *) - echo "Unsupported CPU = $cpu" - exit 1 + armv4b|armv4l) + ARCH=arm ;; esac -if test "$sparse" = "yes" ; then - echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_mak - echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_mak - echo "CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_mak +echo "ARCH=$ARCH" >> $config_host_mak +if test "$debug_tcg" = "yes" ; then + echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak +fi +if test "$debug_mon" = "yes" ; then + echo "CONFIG_DEBUG_MONITOR=y" >> $config_host_mak +fi +if test "$debug" = "yes" ; then + echo "CONFIG_DEBUG_EXEC=y" >> $config_host_mak +fi +if test "$strip_opt" = "yes" ; then + echo "STRIP=${strip}" >> $config_host_mak fi if test "$bigendian" = "yes" ; then - echo "WORDS_BIGENDIAN=yes" >> $config_mak - echo "#define WORDS_BIGENDIAN 1" >> $config_h + echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak fi -echo "#define HOST_LONG_BITS $hostlongbits" >> $config_h +echo "HOST_LONG_BITS=$hostlongbits" >> $config_host_mak if test "$mingw32" = "yes" ; then - echo "CONFIG_WIN32=yes" >> $config_mak - echo "#define CONFIG_WIN32 1" >> $config_h + echo "CONFIG_WIN32=y" >> $config_host_mak + rc_version=`cat $source_path/VERSION` + version_major=${rc_version%%.*} + rc_version=${rc_version#*.} + version_minor=${rc_version%%.*} + rc_version=${rc_version#*.} + version_subminor=${rc_version%%.*} + version_micro=0 + echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak + echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak else - cat > $TMPC << EOF -#include -int main(void) { return bswap_32(0); } -EOF - if $cc $ARCH_CFLAGS -o $TMPE $TMPC >/dev/null 2> /dev/null ; then - echo "#define HAVE_BYTESWAP_H 1" >> $config_h - fi - cat > $TMPC << EOF -#include -#include -#include -int main(void) { return bswap32(0); } -EOF - if $cc $ARCH_CFLAGS -o $TMPE $TMPC >/dev/null 2> /dev/null ; then - echo "#define HAVE_MACHINE_BSWAP_H 1" >> $config_h - fi + echo "CONFIG_POSIX=y" >> $config_host_mak fi -if [ "$openbsd" = "yes" ] ; then - echo "#define ENOTSUP 4096" >> $config_h +if test "$linux" = "yes" ; then + echo "CONFIG_LINUX=y" >> $config_host_mak fi if test "$darwin" = "yes" ; then - echo "CONFIG_DARWIN=yes" >> $config_mak - echo "#define CONFIG_DARWIN 1" >> $config_h + echo "CONFIG_DARWIN=y" >> $config_host_mak fi if test "$aix" = "yes" ; then - echo "CONFIG_AIX=yes" >> $config_mak - echo "#define CONFIG_AIX 1" >> $config_h + echo "CONFIG_AIX=y" >> $config_host_mak fi if test "$solaris" = "yes" ; then - echo "CONFIG_SOLARIS=yes" >> $config_mak - echo "#define HOST_SOLARIS $solarisrev" >> $config_h + echo "CONFIG_SOLARIS=y" >> $config_host_mak + echo "CONFIG_SOLARIS_VERSION=$solarisrev" >> $config_host_mak if test "$needs_libsunmath" = "yes" ; then - echo "NEEDS_LIBSUNMATH=yes" >> $config_mak - echo "#define NEEDS_LIBSUNMATH 1" >> $config_h + echo "CONFIG_NEEDS_LIBSUNMATH=y" >> $config_host_mak fi fi -if test -n "$sparc_cpu"; then - echo "CONFIG__sparc_${sparc_cpu}__=yes" >> $config_mak - echo "#define __sparc_${sparc_cpu}__ 1" >> $config_h -fi -if test "$gdbstub" = "yes" ; then - echo "CONFIG_GDBSTUB=yes" >> $config_mak - echo "#define CONFIG_GDBSTUB 1" >> $config_h -fi -if test "$gprof" = "yes" ; then - echo "TARGET_GPROF=yes" >> $config_mak - echo "#define HAVE_GPROF 1" >> $config_h +if test "$haiku" = "yes" ; then + echo "CONFIG_HAIKU=y" >> $config_host_mak fi if test "$static" = "yes" ; then - echo "CONFIG_STATIC=yes" >> $config_mak - echo "#define CONFIG_STATIC 1" >> $config_h + echo "CONFIG_STATIC=y" >> $config_host_mak fi if test $profiler = "yes" ; then - echo "#define CONFIG_PROFILER 1" >> $config_h + echo "CONFIG_PROFILER=y" >> $config_host_mak fi if test "$slirp" = "yes" ; then - echo "CONFIG_SLIRP=yes" >> $config_mak - echo "#define CONFIG_SLIRP 1" >> $config_h + echo "CONFIG_SLIRP=y" >> $config_host_mak + QEMU_INCLUDES="-I\$(SRC_PATH)/slirp $QEMU_INCLUDES" fi if test "$vde" = "yes" ; then - echo "CONFIG_VDE=yes" >> $config_mak - echo "#define CONFIG_VDE 1" >> $config_h - echo "VDE_LIBS=-lvdeplug" >> $config_mak + echo "CONFIG_VDE=y" >> $config_host_mak fi for card in $audio_card_list; do def=CONFIG_`echo $card | tr '[:lower:]' '[:upper:]'` - echo "$def=yes" >> $config_mak - echo "#define $def 1" >> $config_h + echo "$def=y" >> $config_host_mak done -echo "#define AUDIO_DRIVERS \\" >> $config_h +echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak for drv in $audio_drv_list; do - echo " &${drv}_audio_driver, \\" >>$config_h def=CONFIG_`echo $drv | tr '[:lower:]' '[:upper:]'` - echo "$def=yes" >> $config_mak + echo "$def=y" >> $config_host_mak if test "$drv" = "fmod"; then - echo "CONFIG_FMOD_LIB=$fmod_lib" >> $config_mak - echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_mak - elif test "$drv" = "oss"; then - echo "CONFIG_OSS_LIB=$oss_lib" >> $config_mak + echo "FMOD_CFLAGS=-I$fmod_inc" >> $config_host_mak fi done -echo "" >>$config_h +if test "$audio_pt_int" = "yes" ; then + echo "CONFIG_AUDIO_PT_INT=y" >> $config_host_mak +fi +if test "$audio_win_int" = "yes" ; then + echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak +fi +echo "CONFIG_BDRV_WHITELIST=$block_drv_whitelist" >> $config_host_mak if test "$mixemu" = "yes" ; then - echo "CONFIG_MIXEMU=yes" >> $config_mak - echo "#define CONFIG_MIXEMU 1" >> $config_h + echo "CONFIG_MIXEMU=y" >> $config_host_mak fi if test "$vnc_tls" = "yes" ; then - echo "CONFIG_VNC_TLS=yes" >> $config_mak - echo "CONFIG_VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_mak - echo "CONFIG_VNC_TLS_LIBS=$vnc_tls_libs" >> $config_mak - echo "#define CONFIG_VNC_TLS 1" >> $config_h + echo "CONFIG_VNC_TLS=y" >> $config_host_mak + echo "VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_host_mak fi -qemu_version=`head $source_path/VERSION` -echo "VERSION=$qemu_version" >>$config_mak -echo "#define QEMU_VERSION \"$qemu_version\"" >> $config_h - -echo "SRC_PATH=$source_path" >> $config_mak -if [ "$source_path_used" = "yes" ]; then - echo "VPATH=$source_path" >> $config_mak -fi -echo "TARGET_DIRS=$target_list" >> $config_mak -if [ "$build_docs" = "yes" ] ; then - echo "BUILD_DOCS=yes" >> $config_mak +if test "$vnc_sasl" = "yes" ; then + echo "CONFIG_VNC_SASL=y" >> $config_host_mak + echo "VNC_SASL_CFLAGS=$vnc_sasl_cflags" >> $config_host_mak fi -if test "$static" = "yes"; then - sdl1=$sdl_static -else - sdl1=$sdl +if test "$vnc_jpeg" != "no" ; then + echo "CONFIG_VNC_JPEG=y" >> $config_host_mak + echo "VNC_JPEG_CFLAGS=$vnc_jpeg_cflags" >> $config_host_mak fi -if test "$sdl1" = "yes" ; then - echo "#define CONFIG_SDL 1" >> $config_h - echo "CONFIG_SDL=yes" >> $config_mak - if test "$target_softmmu" = "no" -o "$static" = "yes"; then - echo "SDL_LIBS=$sdl_static_libs" >> $config_mak - elif test "$sdl_x11" = "yes" ; then - echo "SDL_LIBS=`$sdl_config --libs` -lX11" >> $config_mak - else - echo "SDL_LIBS=`$sdl_config --libs`" >> $config_mak - fi - if [ "${aa}" = "yes" ] ; then - echo "SDL_CFLAGS=`$sdl_config --cflags` `aalib-config --cflags`" >> $config_mak - else - echo "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_mak - fi +if test "$vnc_png" != "no" ; then + echo "CONFIG_VNC_PNG=y" >> $config_host_mak + echo "VNC_PNG_CFLAGS=$vnc_png_cflags" >> $config_host_mak +fi +if test "$vnc_thread" != "no" ; then + echo "CONFIG_VNC_THREAD=y" >> $config_host_mak + echo "CONFIG_THREAD=y" >> $config_host_mak +fi +if test "$fnmatch" = "yes" ; then + echo "CONFIG_FNMATCH=y" >> $config_host_mak +fi +if test "$uuid" = "yes" ; then + echo "CONFIG_UUID=y" >> $config_host_mak +fi +if test "$xfs" = "yes" ; then + echo "CONFIG_XFS=y" >> $config_host_mak +fi +qemu_version=`head $source_path/VERSION` +echo "VERSION=$qemu_version" >>$config_host_mak +echo "PKGVERSION=$pkgversion" >>$config_host_mak +echo "SRC_PATH=$source_path" >> $config_host_mak +echo "TARGET_DIRS=$target_list" >> $config_host_mak +if [ "$docs" = "yes" ] ; then + echo "BUILD_DOCS=yes" >> $config_host_mak +fi +if test "$sdl" = "yes" ; then + echo "CONFIG_SDL=y" >> $config_host_mak + echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak fi if test "$cocoa" = "yes" ; then - echo "#define CONFIG_COCOA 1" >> $config_h - echo "CONFIG_COCOA=yes" >> $config_mak + echo "CONFIG_COCOA=y" >> $config_host_mak fi if test "$curses" = "yes" ; then - echo "#define CONFIG_CURSES 1" >> $config_h - echo "CONFIG_CURSES=yes" >> $config_mak - echo "CURSES_LIBS=-lcurses" >> $config_mak + echo "CONFIG_CURSES=y" >> $config_host_mak +fi +if test "$atfile" = "yes" ; then + echo "CONFIG_ATFILE=y" >> $config_host_mak +fi +if test "$utimens" = "yes" ; then + echo "CONFIG_UTIMENSAT=y" >> $config_host_mak +fi +if test "$pipe2" = "yes" ; then + echo "CONFIG_PIPE2=y" >> $config_host_mak +fi +if test "$accept4" = "yes" ; then + echo "CONFIG_ACCEPT4=y" >> $config_host_mak +fi +if test "$splice" = "yes" ; then + echo "CONFIG_SPLICE=y" >> $config_host_mak +fi +if test "$eventfd" = "yes" ; then + echo "CONFIG_EVENTFD=y" >> $config_host_mak +fi +if test "$fallocate" = "yes" ; then + echo "CONFIG_FALLOCATE=y" >> $config_host_mak +fi +if test "$sync_file_range" = "yes" ; then + echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak +fi +if test "$fiemap" = "yes" ; then + echo "CONFIG_FIEMAP=y" >> $config_host_mak +fi +if test "$dup3" = "yes" ; then + echo "CONFIG_DUP3=y" >> $config_host_mak +fi +if test "$inotify" = "yes" ; then + echo "CONFIG_INOTIFY=y" >> $config_host_mak +fi +if test "$inotify1" = "yes" ; then + echo "CONFIG_INOTIFY1=y" >> $config_host_mak +fi +if test "$byteswap_h" = "yes" ; then + echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak +fi +if test "$bswap_h" = "yes" ; then + echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak +fi +if test "$curl" = "yes" ; then + echo "CONFIG_CURL=y" >> $config_host_mak + echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak fi if test "$brlapi" = "yes" ; then - echo "CONFIG_BRLAPI=yes" >> $config_mak - echo "#define CONFIG_BRLAPI 1" >> $config_h - echo "BRLAPI_LIBS=-lbrlapi" >> $config_mak + echo "CONFIG_BRLAPI=y" >> $config_host_mak fi if test "$bluez" = "yes" ; then - echo "CONFIG_BLUEZ=yes" >> $config_mak - echo "CONFIG_BLUEZ_CFLAGS=$bluez_cflags" >> $config_mak - echo "CONFIG_BLUEZ_LIBS=$bluez_libs" >> $config_mak - echo "#define CONFIG_BLUEZ 1" >> $config_h -fi -if test "$aio" = "yes" ; then - echo "#define CONFIG_AIO 1" >> $config_h - echo "CONFIG_AIO=yes" >> $config_mak + echo "CONFIG_BLUEZ=y" >> $config_host_mak + echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak +fi +if test "$xen" = "yes" ; then + echo "CONFIG_XEN=y" >> $config_host_mak +fi +if test "$io_thread" = "yes" ; then + echo "CONFIG_IOTHREAD=y" >> $config_host_mak + echo "CONFIG_THREAD=y" >> $config_host_mak +fi +if test "$linux_aio" = "yes" ; then + echo "CONFIG_LINUX_AIO=y" >> $config_host_mak +fi +if test "$attr" = "yes" ; then + echo "CONFIG_ATTR=y" >> $config_host_mak +fi +if test "$linux" = "yes" ; then + if test "$attr" = "yes" ; then + echo "CONFIG_VIRTFS=y" >> $config_host_mak + fi fi if test "$blobs" = "yes" ; then - echo "INSTALL_BLOBS=yes" >> $config_mak + echo "INSTALL_BLOBS=yes" >> $config_host_mak fi if test "$iovec" = "yes" ; then - echo "#define HAVE_IOVEC 1" >> $config_h + echo "CONFIG_IOVEC=y" >> $config_host_mak +fi +if test "$preadv" = "yes" ; then + echo "CONFIG_PREADV=y" >> $config_host_mak fi if test "$fdt" = "yes" ; then - echo "#define HAVE_FDT 1" >> $config_h - echo "FDT_LIBS=-lfdt" >> $config_mak + echo "CONFIG_FDT=y" >> $config_host_mak +fi +if test "$signalfd" = "yes" ; then + echo "CONFIG_SIGNALFD=y" >> $config_host_mak +fi +if test "$need_offsetof" = "yes" ; then + echo "CONFIG_NEED_OFFSETOF=y" >> $config_host_mak +fi +if test "$gcc_attribute_warn_unused_result" = "yes" ; then + echo "CONFIG_GCC_ATTRIBUTE_WARN_UNUSED_RESULT=y" >> $config_host_mak +fi +if test "$fdatasync" = "yes" ; then + echo "CONFIG_FDATASYNC=y" >> $config_host_mak +fi +if test "$madvise" = "yes" ; then + echo "CONFIG_MADVISE=y" >> $config_host_mak +fi +if test "$posix_madvise" = "yes" ; then + echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak +fi + +if test "$spice" = "yes" ; then + echo "CONFIG_SPICE=y" >> $config_host_mak fi # XXX: suppress that if [ "$bsd" = "yes" ] ; then - echo "#define O_LARGEFILE 0" >> $config_h - echo "#define MAP_ANONYMOUS MAP_ANON" >> $config_h - echo "#define _BSD 1" >> $config_h + echo "CONFIG_BSD=y" >> $config_host_mak fi -echo "#define CONFIG_UNAME_RELEASE \"$uname_release\"" >> $config_h +echo "CONFIG_UNAME_RELEASE=\"$uname_release\"" >> $config_host_mak + +if test "$zero_malloc" = "yes" ; then + echo "CONFIG_ZERO_MALLOC=y" >> $config_host_mak +fi +if test "$rbd" = "yes" ; then + echo "CONFIG_RBD=y" >> $config_host_mak +fi # USB host support case "$usb" in linux) - echo "HOST_USB=linux" >> $config_mak + echo "HOST_USB=linux" >> $config_host_mak ;; bsd) - echo "HOST_USB=bsd" >> $config_mak + echo "HOST_USB=bsd" >> $config_host_mak ;; *) - echo "HOST_USB=stub" >> $config_mak + echo "HOST_USB=stub" >> $config_host_mak ;; esac -tools= -if test `expr "$target_list" : ".*softmmu.*"` != 0 ; then - tools="qemu-img\$(EXESUF) $tools" - if [ "$linux" = "yes" ] ; then - tools="qemu-nbd\$(EXESUF) $tools" +echo "TRACE_BACKEND=$trace_backend" >> $config_host_mak +if test "$trace_backend" = "simple"; then + echo "CONFIG_SIMPLE_TRACE=y" >> $config_host_mak +fi +# Set the appropriate trace file. +if test "$trace_backend" = "simple"; then + trace_file="\"$trace_file-%u\"" +fi +if test "$trace_backend" = "dtrace" -a "$trace_backend_stap" = "yes" ; then + echo "CONFIG_SYSTEMTAP_TRACE=y" >> $config_host_mak +fi +echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak + +echo "TOOLS=$tools" >> $config_host_mak +echo "ROMS=$roms" >> $config_host_mak +echo "MAKE=$make" >> $config_host_mak +echo "INSTALL=$install" >> $config_host_mak +echo "INSTALL_DIR=$install -d -m0755 -p" >> $config_host_mak +echo "INSTALL_DATA=$install -m0644 -p" >> $config_host_mak +echo "INSTALL_PROG=$install -m0755 -p" >> $config_host_mak +echo "CC=$cc" >> $config_host_mak +echo "CC_I386=$cc_i386" >> $config_host_mak +echo "HOST_CC=$host_cc" >> $config_host_mak +echo "AR=$ar" >> $config_host_mak +echo "OBJCOPY=$objcopy" >> $config_host_mak +echo "LD=$ld" >> $config_host_mak +echo "WINDRES=$windres" >> $config_host_mak +echo "CFLAGS=$CFLAGS" >> $config_host_mak +echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak +echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak +if test "$sparse" = "yes" ; then + echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak + echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak + echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak +fi +echo "HELPER_CFLAGS=$helper_cflags" >> $config_host_mak +echo "LDFLAGS=$LDFLAGS" >> $config_host_mak +echo "ARLIBS_BEGIN=$arlibs_begin" >> $config_host_mak +echo "ARLIBS_END=$arlibs_end" >> $config_host_mak +echo "LIBS+=$LIBS" >> $config_host_mak +echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak +echo "EXESUF=$EXESUF" >> $config_host_mak + +# generate list of library paths for linker script + +$ld --verbose -v 2> /dev/null | grep SEARCH_DIR > ${config_host_ld} + +if test -f ${config_host_ld}~ ; then + if cmp -s $config_host_ld ${config_host_ld}~ ; then + mv ${config_host_ld}~ $config_host_ld + else + rm ${config_host_ld}~ fi fi -echo "TOOLS=$tools" >> $config_mak -test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h +for d in libdis libdis-user; do + mkdir -p $d + symlink $source_path/Makefile.dis $d/Makefile + echo > $d/config.mak +done +if test "$static" = "no" -a "$user_pie" = "yes" ; then + echo "QEMU_CFLAGS+=-fpie" > libdis-user/config.mak +fi for target in $target_list; do target_dir="$target" -config_mak=$target_dir/config.mak -config_h=$target_dir/config.h -target_cpu=`echo $target | cut -d '-' -f 1` +config_target_mak=$target_dir/config-target.mak +target_arch2=`echo $target | cut -d '-' -f 1` target_bigendian="no" -[ "$target_cpu" = "armeb" ] && target_bigendian=yes -[ "$target_cpu" = "m68k" ] && target_bigendian=yes -[ "$target_cpu" = "mips" ] && target_bigendian=yes -[ "$target_cpu" = "mipsn32" ] && target_bigendian=yes -[ "$target_cpu" = "mips64" ] && target_bigendian=yes -[ "$target_cpu" = "ppc" ] && target_bigendian=yes -[ "$target_cpu" = "ppcemb" ] && target_bigendian=yes -[ "$target_cpu" = "ppc64" ] && target_bigendian=yes -[ "$target_cpu" = "ppc64abi32" ] && target_bigendian=yes -[ "$target_cpu" = "sh4eb" ] && target_bigendian=yes -[ "$target_cpu" = "sparc" ] && target_bigendian=yes -[ "$target_cpu" = "sparc64" ] && target_bigendian=yes -[ "$target_cpu" = "sparc32plus" ] && target_bigendian=yes + +case "$target_arch2" in + armeb|m68k|microblaze|mips|mipsn32|mips64|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus) + target_bigendian=yes + ;; +esac target_softmmu="no" target_user_only="no" target_linux_user="no" target_darwin_user="no" target_bsd_user="no" case "$target" in - ${target_cpu}-softmmu) + ${target_arch2}-softmmu) target_softmmu="yes" ;; - ${target_cpu}-linux-user) + ${target_arch2}-linux-user) + if test "$linux" != "yes" ; then + echo "ERROR: Target '$target' is only available on a Linux host" + exit 1 + fi target_user_only="yes" target_linux_user="yes" ;; - ${target_cpu}-darwin-user) + ${target_arch2}-darwin-user) + if test "$darwin" != "yes" ; then + echo "ERROR: Target '$target' is only available on a Darwin host" + exit 1 + fi target_user_only="yes" target_darwin_user="yes" ;; - ${target_cpu}-bsd-user) + ${target_arch2}-bsd-user) + if test "$bsd" != "yes" ; then + echo "ERROR: Target '$target' is only available on a BSD host" + exit 1 + fi target_user_only="yes" target_bsd_user="yes" ;; @@ -1534,285 +2885,410 @@ case "$target" in ;; esac -if test "$target_user_only" = "no" -a "$check_gfx" = "yes" \ - -a "$sdl" = "no" -a "$cocoa" = "no" ; then - echo "ERROR: QEMU requires SDL or Cocoa for graphical output" - echo "To build QEMU without graphical output configure with --disable-gfx-check" - echo "Note that this will disable all output from the virtual graphics card" - echo "except through VNC or curses." - exit 1; -fi - -#echo "Creating $config_mak, $config_h and $target_dir/Makefile" - -test -f $config_h && mv $config_h ${config_h}~ - mkdir -p $target_dir mkdir -p $target_dir/fpu mkdir -p $target_dir/tcg +mkdir -p $target_dir/ide if test "$target" = "arm-linux-user" -o "$target" = "armeb-linux-user" -o "$target" = "arm-bsd-user" -o "$target" = "armeb-bsd-user" ; then mkdir -p $target_dir/nwfpe fi +symlink $source_path/Makefile.target $target_dir/Makefile -# -# don't use ln -sf as not all "ln -sf" over write the file/link -# -rm -f $target_dir/Makefile -ln -s $source_path/Makefile.target $target_dir/Makefile - - -echo "# Automatically generated by configure - do not modify" > $config_mak -echo "/* Automatically generated by configure - do not modify */" > $config_h - -echo "include ../config-host.mak" >> $config_mak -echo "#include \"../config-host.h\"" >> $config_h +echo "# Automatically generated by configure - do not modify" > $config_target_mak bflt="no" -elfload32="no" target_nptl="no" -interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_cpu/g"` -echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix1\"" >> $config_h +interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"` +echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak gdb_xml_files="" -# Make sure the target and host cpus are compatible -if test "$kvm" = "yes" -a ! \( "$target_cpu" = "$cpu" -o \ - \( "$target_cpu" = "ppcemb" -a "$cpu" = "ppc" \) -o \ - \( "$target_cpu" = "x86_64" -a "$cpu" = "i386" \) -o \ - \( "$target_cpu" = "i386" -a "$cpu" = "x86_64" \) \) ; then - kvm="no" -fi -# Disable KVM for linux-user -if test "$kvm" = "yes" -a "$target_softmmu" = "no" ; then - kvm="no" -fi +TARGET_ARCH="$target_arch2" +TARGET_BASE_ARCH="" +TARGET_ABI_DIR="" -case "$target_cpu" in +case "$target_arch2" in i386) - echo "TARGET_ARCH=i386" >> $config_mak - echo "#define TARGET_ARCH \"i386\"" >> $config_h - echo "#define TARGET_I386 1" >> $config_h - if test $kqemu = "yes" -a "$target_softmmu" = "yes" - then - echo "#define USE_KQEMU 1" >> $config_h - fi - if test "$kvm" = "yes" ; then - echo "CONFIG_KVM=yes" >> $config_mak - echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak - echo "#define CONFIG_KVM 1" >> $config_h - fi + target_phys_bits=32 ;; x86_64) - echo "TARGET_ARCH=x86_64" >> $config_mak - echo "#define TARGET_ARCH \"x86_64\"" >> $config_h - echo "#define TARGET_I386 1" >> $config_h - echo "#define TARGET_X86_64 1" >> $config_h - if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64" - then - echo "#define USE_KQEMU 1" >> $config_h - fi - if test "$kvm" = "yes" ; then - echo "CONFIG_KVM=yes" >> $config_mak - echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak - echo "#define CONFIG_KVM 1" >> $config_h - fi + TARGET_BASE_ARCH=i386 + target_phys_bits=64 ;; alpha) - echo "TARGET_ARCH=alpha" >> $config_mak - echo "#define TARGET_ARCH \"alpha\"" >> $config_h - echo "#define TARGET_ALPHA 1" >> $config_h + target_phys_bits=64 + target_nptl="yes" ;; arm|armeb) - echo "TARGET_ARCH=arm" >> $config_mak - echo "#define TARGET_ARCH \"arm\"" >> $config_h - echo "#define TARGET_ARM 1" >> $config_h + TARGET_ARCH=arm bflt="yes" target_nptl="yes" gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml" + target_phys_bits=32 ;; cris) - echo "TARGET_ARCH=cris" >> $config_mak - echo "#define TARGET_ARCH \"cris\"" >> $config_h - echo "#define TARGET_CRIS 1" >> $config_h target_nptl="yes" + target_phys_bits=32 ;; m68k) - echo "TARGET_ARCH=m68k" >> $config_mak - echo "#define TARGET_ARCH \"m68k\"" >> $config_h - echo "#define TARGET_M68K 1" >> $config_h bflt="yes" gdb_xml_files="cf-core.xml cf-fp.xml" + target_phys_bits=32 + ;; + microblaze) + bflt="yes" + target_nptl="yes" + target_phys_bits=32 ;; mips|mipsel) - echo "TARGET_ARCH=mips" >> $config_mak - echo "#define TARGET_ARCH \"mips\"" >> $config_h - echo "#define TARGET_MIPS 1" >> $config_h - echo "#define TARGET_ABI_MIPSO32 1" >> $config_h + TARGET_ARCH=mips + echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak + target_nptl="yes" + target_phys_bits=64 ;; mipsn32|mipsn32el) - echo "TARGET_ARCH=mipsn32" >> $config_mak - echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h - echo "#define TARGET_MIPS 1" >> $config_h - echo "#define TARGET_ABI_MIPSN32 1" >> $config_h + TARGET_ARCH=mipsn32 + TARGET_BASE_ARCH=mips + echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak + target_phys_bits=64 ;; mips64|mips64el) - echo "TARGET_ARCH=mips64" >> $config_mak - echo "#define TARGET_ARCH \"mips64\"" >> $config_h - echo "#define TARGET_MIPS 1" >> $config_h - echo "#define TARGET_MIPS64 1" >> $config_h - echo "#define TARGET_ABI_MIPSN64 1" >> $config_h + TARGET_ARCH=mips64 + TARGET_BASE_ARCH=mips + echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak + target_phys_bits=64 ;; ppc) - echo "TARGET_ARCH=ppc" >> $config_mak - echo "#define TARGET_ARCH \"ppc\"" >> $config_h - echo "#define TARGET_PPC 1" >> $config_h gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=32 + target_nptl="yes" ;; ppcemb) - echo "TARGET_ARCH=ppcemb" >> $config_mak - echo "TARGET_ABI_DIR=ppc" >> $config_mak - echo "#define TARGET_ARCH \"ppcemb\"" >> $config_h - echo "#define TARGET_PPC 1" >> $config_h - echo "#define TARGET_PPCEMB 1" >> $config_h - if test "$kvm" = "yes" ; then - echo "CONFIG_KVM=yes" >> $config_mak - echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak - echo "#define CONFIG_KVM 1" >> $config_h - fi + TARGET_BASE_ARCH=ppc + TARGET_ABI_DIR=ppc gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=64 + target_nptl="yes" ;; ppc64) - echo "TARGET_ARCH=ppc64" >> $config_mak - echo "TARGET_ABI_DIR=ppc" >> $config_mak - echo "#define TARGET_ARCH \"ppc64\"" >> $config_h - echo "#define TARGET_PPC 1" >> $config_h - echo "#define TARGET_PPC64 1" >> $config_h + TARGET_BASE_ARCH=ppc + TARGET_ABI_DIR=ppc gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=64 ;; ppc64abi32) - echo "TARGET_ARCH=ppc64" >> $config_mak - echo "TARGET_ABI_DIR=ppc" >> $config_mak - echo "TARGET_ARCH2=ppc64abi32" >> $config_mak - echo "#define TARGET_ARCH \"ppc64\"" >> $config_h - echo "#define TARGET_PPC 1" >> $config_h - echo "#define TARGET_PPC64 1" >> $config_h - echo "#define TARGET_ABI32 1" >> $config_h + TARGET_ARCH=ppc64 + TARGET_BASE_ARCH=ppc + TARGET_ABI_DIR=ppc + echo "TARGET_ABI32=y" >> $config_target_mak gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml" + target_phys_bits=64 ;; sh4|sh4eb) - echo "TARGET_ARCH=sh4" >> $config_mak - echo "#define TARGET_ARCH \"sh4\"" >> $config_h - echo "#define TARGET_SH4 1" >> $config_h + TARGET_ARCH=sh4 bflt="yes" target_nptl="yes" + target_phys_bits=32 ;; sparc) - echo "TARGET_ARCH=sparc" >> $config_mak - echo "#define TARGET_ARCH \"sparc\"" >> $config_h - echo "#define TARGET_SPARC 1" >> $config_h + target_phys_bits=64 ;; sparc64) - echo "TARGET_ARCH=sparc64" >> $config_mak - echo "#define TARGET_ARCH \"sparc64\"" >> $config_h - echo "#define TARGET_SPARC 1" >> $config_h - echo "#define TARGET_SPARC64 1" >> $config_h - elfload32="yes" + TARGET_BASE_ARCH=sparc + target_phys_bits=64 ;; sparc32plus) - echo "TARGET_ARCH=sparc64" >> $config_mak - echo "TARGET_ABI_DIR=sparc" >> $config_mak - echo "TARGET_ARCH2=sparc32plus" >> $config_mak - echo "#define TARGET_ARCH \"sparc64\"" >> $config_h - echo "#define TARGET_SPARC 1" >> $config_h - echo "#define TARGET_SPARC64 1" >> $config_h - echo "#define TARGET_ABI32 1" >> $config_h + TARGET_ARCH=sparc64 + TARGET_BASE_ARCH=sparc + TARGET_ABI_DIR=sparc + echo "TARGET_ABI32=y" >> $config_target_mak + target_phys_bits=64 + ;; + s390x) + target_phys_bits=64 ;; *) echo "Unsupported target CPU" exit 1 ;; esac +echo "TARGET_ARCH=$TARGET_ARCH" >> $config_target_mak +target_arch_name="`echo $TARGET_ARCH | tr '[:lower:]' '[:upper:]'`" +echo "TARGET_$target_arch_name=y" >> $config_target_mak +echo "TARGET_ARCH2=$target_arch2" >> $config_target_mak +# TARGET_BASE_ARCH needs to be defined after TARGET_ARCH +if [ "$TARGET_BASE_ARCH" = "" ]; then + TARGET_BASE_ARCH=$TARGET_ARCH +fi +echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak +if [ "$TARGET_ABI_DIR" = "" ]; then + TARGET_ABI_DIR=$TARGET_ARCH +fi +echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak +case "$target_arch2" in + i386|x86_64) + if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then + echo "CONFIG_XEN=y" >> $config_target_mak + fi +esac +case "$target_arch2" in + i386|x86_64|ppcemb|ppc|ppc64|s390x) + # Make sure the target and host cpus are compatible + if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \ + \( "$target_arch2" = "$cpu" -o \ + \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc" \) -o \ + \( "$target_arch2" = "ppc64" -a "$cpu" = "ppc" \) -o \ + \( "$target_arch2" = "x86_64" -a "$cpu" = "i386" \) -o \ + \( "$target_arch2" = "i386" -a "$cpu" = "x86_64" \) \) ; then + echo "CONFIG_KVM=y" >> $config_target_mak + echo "KVM_CFLAGS=$kvm_cflags" >> $config_target_mak + if test "$kvm_para" = "yes"; then + echo "CONFIG_KVM_PARA=y" >> $config_target_mak + fi + if test $vhost_net = "yes" ; then + echo "CONFIG_VHOST_NET=y" >> $config_target_mak + fi + fi +esac if test "$target_bigendian" = "yes" ; then - echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak - echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h + echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak fi if test "$target_softmmu" = "yes" ; then - echo "CONFIG_SOFTMMU=yes" >> $config_mak - echo "#define CONFIG_SOFTMMU 1" >> $config_h + echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_target_mak + echo "CONFIG_SOFTMMU=y" >> $config_target_mak + echo "LIBS+=$libs_softmmu" >> $config_target_mak + echo "HWDIR=../libhw$target_phys_bits" >> $config_target_mak + echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak fi if test "$target_user_only" = "yes" ; then - echo "CONFIG_USER_ONLY=yes" >> $config_mak - echo "#define CONFIG_USER_ONLY 1" >> $config_h + echo "CONFIG_USER_ONLY=y" >> $config_target_mak fi if test "$target_linux_user" = "yes" ; then - echo "CONFIG_LINUX_USER=yes" >> $config_mak - echo "#define CONFIG_LINUX_USER 1" >> $config_h + echo "CONFIG_LINUX_USER=y" >> $config_target_mak fi if test "$target_darwin_user" = "yes" ; then - echo "CONFIG_DARWIN_USER=yes" >> $config_mak - echo "#define CONFIG_DARWIN_USER 1" >> $config_h + echo "CONFIG_DARWIN_USER=y" >> $config_target_mak fi list="" if test ! -z "$gdb_xml_files" ; then for x in $gdb_xml_files; do list="$list $source_path/gdb-xml/$x" done + echo "TARGET_XML_FILES=$list" >> $config_target_mak fi -echo "TARGET_XML_FILES=$list" >> $config_mak -if test "$target_cpu" = "arm" \ - -o "$target_cpu" = "armeb" \ - -o "$target_cpu" = "m68k" \ - -o "$target_cpu" = "mips" \ - -o "$target_cpu" = "mipsel" \ - -o "$target_cpu" = "mipsn32" \ - -o "$target_cpu" = "mipsn32el" \ - -o "$target_cpu" = "mips64" \ - -o "$target_cpu" = "mips64el" \ - -o "$target_cpu" = "ppc" \ - -o "$target_cpu" = "ppc64" \ - -o "$target_cpu" = "ppc64abi32" \ - -o "$target_cpu" = "ppcemb" \ - -o "$target_cpu" = "sparc" \ - -o "$target_cpu" = "sparc64" \ - -o "$target_cpu" = "sparc32plus"; then - echo "CONFIG_SOFTFLOAT=yes" >> $config_mak - echo "#define CONFIG_SOFTFLOAT 1" >> $config_h -fi +case "$target_arch2" in + i386|x86_64) + echo "CONFIG_NOSOFTFLOAT=y" >> $config_target_mak + ;; + *) + echo "CONFIG_SOFTFLOAT=y" >> $config_target_mak + ;; +esac + if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then - echo "TARGET_HAS_BFLT=yes" >> $config_mak - echo "#define TARGET_HAS_BFLT 1" >> $config_h + echo "TARGET_HAS_BFLT=y" >> $config_target_mak fi if test "$target_user_only" = "yes" \ -a "$nptl" = "yes" -a "$target_nptl" = "yes"; then - echo "#define USE_NPTL 1" >> $config_h + echo "CONFIG_USE_NPTL=y" >> $config_target_mak fi -# 32 bit ELF loader in addition to native 64 bit loader? -if test "$target_user_only" = "yes" -a "$elfload32" = "yes"; then - echo "TARGET_HAS_ELFLOAD32=yes" >> $config_mak - echo "#define TARGET_HAS_ELFLOAD32 1" >> $config_h +if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then + echo "CONFIG_USE_GUEST_BASE=y" >> $config_target_mak fi if test "$target_bsd_user" = "yes" ; then - echo "CONFIG_BSD_USER=yes" >> $config_mak - echo "#define CONFIG_BSD_USER 1" >> $config_h + echo "CONFIG_BSD_USER=y" >> $config_target_mak +fi + +# generate QEMU_CFLAGS/LDFLAGS for targets + +cflags="" +includes="" +ldflags="" + +if test "$ARCH" = "sparc64" ; then + includes="-I\$(SRC_PATH)/tcg/sparc $includes" +elif test "$ARCH" = "s390x" ; then + includes="-I\$(SRC_PATH)/tcg/s390 $includes" +elif test "$ARCH" = "x86_64" ; then + includes="-I\$(SRC_PATH)/tcg/i386 $includes" +else + includes="-I\$(SRC_PATH)/tcg/\$(ARCH) $includes" +fi +includes="-I\$(SRC_PATH)/tcg $includes" +includes="-I\$(SRC_PATH)/fpu $includes" + +if test "$target_user_only" = "yes" ; then + libdis_config_mak=libdis-user/config.mak +else + libdis_config_mak=libdis/config.mak +fi + +for i in $ARCH $TARGET_BASE_ARCH ; do + case "$i" in + alpha) + echo "CONFIG_ALPHA_DIS=y" >> $config_target_mak + echo "CONFIG_ALPHA_DIS=y" >> $libdis_config_mak + ;; + arm) + echo "CONFIG_ARM_DIS=y" >> $config_target_mak + echo "CONFIG_ARM_DIS=y" >> $libdis_config_mak + ;; + cris) + echo "CONFIG_CRIS_DIS=y" >> $config_target_mak + echo "CONFIG_CRIS_DIS=y" >> $libdis_config_mak + ;; + hppa) + echo "CONFIG_HPPA_DIS=y" >> $config_target_mak + echo "CONFIG_HPPA_DIS=y" >> $libdis_config_mak + ;; + i386|x86_64) + echo "CONFIG_I386_DIS=y" >> $config_target_mak + echo "CONFIG_I386_DIS=y" >> $libdis_config_mak + ;; + ia64*) + echo "CONFIG_IA64_DIS=y" >> $config_target_mak + echo "CONFIG_IA64_DIS=y" >> $libdis_config_mak + ;; + m68k) + echo "CONFIG_M68K_DIS=y" >> $config_target_mak + echo "CONFIG_M68K_DIS=y" >> $libdis_config_mak + ;; + microblaze) + echo "CONFIG_MICROBLAZE_DIS=y" >> $config_target_mak + echo "CONFIG_MICROBLAZE_DIS=y" >> $libdis_config_mak + ;; + mips*) + echo "CONFIG_MIPS_DIS=y" >> $config_target_mak + echo "CONFIG_MIPS_DIS=y" >> $libdis_config_mak + ;; + ppc*) + echo "CONFIG_PPC_DIS=y" >> $config_target_mak + echo "CONFIG_PPC_DIS=y" >> $libdis_config_mak + ;; + s390*) + echo "CONFIG_S390_DIS=y" >> $config_target_mak + echo "CONFIG_S390_DIS=y" >> $libdis_config_mak + ;; + sh4) + echo "CONFIG_SH4_DIS=y" >> $config_target_mak + echo "CONFIG_SH4_DIS=y" >> $libdis_config_mak + ;; + sparc*) + echo "CONFIG_SPARC_DIS=y" >> $config_target_mak + echo "CONFIG_SPARC_DIS=y" >> $libdis_config_mak + ;; + esac +done + +case "$ARCH" in +alpha) + # Ensure there's only a single GP + cflags="-msmall-data $cflags" +;; +esac + +if test "$target_softmmu" = "yes" ; then + case "$TARGET_BASE_ARCH" in + arm) + cflags="-DHAS_AUDIO $cflags" + ;; + i386|mips|ppc) + cflags="-DHAS_AUDIO -DHAS_AUDIO_CHOICE $cflags" + ;; + esac +fi + +if test "$target_user_only" = "yes" -a "$static" = "no" -a \ + "$user_pie" = "yes" ; then + cflags="-fpie $cflags" + ldflags="-pie $ldflags" +fi + +if test "$target_softmmu" = "yes" -a \( \ + "$TARGET_ARCH" = "microblaze" -o \ + "$TARGET_ARCH" = "cris" \) ; then + echo "CONFIG_NEED_MMU=y" >> $config_target_mak +fi + +if test "$gprof" = "yes" ; then + echo "TARGET_GPROF=yes" >> $config_target_mak + if test "$target_linux_user" = "yes" ; then + cflags="-p $cflags" + ldflags="-p $ldflags" + fi + if test "$target_softmmu" = "yes" ; then + ldflags="-p $ldflags" + echo "GPROF_CFLAGS=-p" >> $config_target_mak + fi +fi + +linker_script="-Wl,-T../config-host.ld -Wl,-T,\$(SRC_PATH)/\$(ARCH).ld" +if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then + case "$ARCH" in + sparc) + # -static is used to avoid g1/g3 usage by the dynamic linker + ldflags="$linker_script -static $ldflags" + ;; + alpha | s390x) + # The default placement of the application is fine. + ;; + *) + ldflags="$linker_script $ldflags" + ;; + esac fi -test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h +echo "LDFLAGS+=$ldflags" >> $config_target_mak +echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak +echo "QEMU_INCLUDES+=$includes" >> $config_target_mak done # for target in $targets -# build tree in object directory if source path is different from current one -if test "$source_path_used" = "yes" ; then - DIRS="tests tests/cris slirp audio" - FILES="Makefile tests/Makefile" - FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit" - FILES="$FILES tests/test-mmap.c" - for dir in $DIRS ; do - mkdir -p $dir - done - # remove the link and recreate it, as not all "ln -sf" overwrite the link - for f in $FILES ; do - rm -f $f - ln -s $source_path/$f $f - done +# build tree in object directory in case the source is not in the current directory +DIRS="tests tests/cris slirp audio block net pc-bios/optionrom" +DIRS="$DIRS roms/seabios roms/vgabios" +DIRS="$DIRS fsdev ui" +FILES="Makefile tests/Makefile" +FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit" +FILES="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps" +FILES="$FILES roms/seabios/Makefile roms/vgabios/Makefile" +for bios_file in $source_path/pc-bios/*.bin $source_path/pc-bios/*.dtb $source_path/pc-bios/openbios-*; do + FILES="$FILES pc-bios/`basename $bios_file`" +done +mkdir -p $DIRS +for f in $FILES ; do + test -e $f || symlink $source_path/$f $f +done + +# temporary config to build submodules +for rom in seabios vgabios ; do + config_mak=roms/$rom/config.mak + echo "# Automatically generated by configure - do not modify" > $config_mak + echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak + echo "CC=$cc" >> $config_mak + echo "BCC=bcc" >> $config_mak + echo "CPP=${cross_prefix}cpp" >> $config_mak + echo "OBJCOPY=objcopy" >> $config_mak + echo "IASL=iasl" >> $config_mak + echo "LD=$ld" >> $config_mak +done + +for hwlib in 32 64; do + d=libhw$hwlib + mkdir -p $d + mkdir -p $d/ide + symlink $source_path/Makefile.hw $d/Makefile + echo "QEMU_CFLAGS+=-DTARGET_PHYS_ADDR_BITS=$hwlib" > $d/config.mak +done + +d=libuser +mkdir -p $d +symlink $source_path/Makefile.user $d/Makefile +if test "$static" = "no" -a "$user_pie" = "yes" ; then + echo "QEMU_CFLAGS+=-fpie" > $d/config.mak +fi + +if test "$docs" = "yes" ; then + mkdir -p QMP fi