[BACK]Return to configure CVS log [TXT] [DIR] Up to [Qemu by Fabrice Bellard] / qemu

Diff for /qemu/configure between versions 1.1 and 1.1.1.9

version 1.1, 2018/04/24 16:37:52 version 1.1.1.9, 2018/04/24 17:20:49
Line 15  TMPC="${TMPDIR1}/qemu-conf-${RANDOM}-$$- Line 15  TMPC="${TMPDIR1}/qemu-conf-${RANDOM}-$$-
 TMPO="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.o"  TMPO="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.o"
 TMPE="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}"  TMPE="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}"
 TMPS="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.S"  TMPS="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.S"
   TMPI="${TMPDIR1}/qemu-conf-${RANDOM}-$$-${RANDOM}.i"
   TMPSDLLOG="${TMPDIR1}/qemu-conf-sdl-$$-${RANDOM}.log"
   
   trap "rm -f $TMPC $TMPO $TMPE $TMPS $TMPI $TMPSDLLOG; exit" 0 2 3 15
   
 # default parameters  # default parameters
 prefix=""  prefix=""
Line 22  interp_prefix="/usr/gnemul/qemu-%M" Line 26  interp_prefix="/usr/gnemul/qemu-%M"
 static="no"  static="no"
 cross_prefix=""  cross_prefix=""
 cc="gcc"  cc="gcc"
   audio_drv_list=""
   audio_card_list="ac97 es1370 sb16"
   audio_possible_cards="ac97 es1370 sb16 cs4231a adlib gus"
 host_cc="gcc"  host_cc="gcc"
 ar="ar"  ar="ar"
 make="make"  make="make"
   install="install"
 strip="strip"  strip="strip"
 cpu=`uname -m`  objcopy="objcopy"
   ld="ld"
   
   # parse CC options first
   for opt do
     optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
     case "$opt" in
     --cross-prefix=*) cross_prefix="$optarg"
     ;;
     --cc=*) cc="$optarg"
     ;;
     esac
   done
   
   # OS specific
   # Using uname is really, really broken.  Once we have the right set of checks
   # we can eliminate it's usage altogether
   
   cc="${cross_prefix}${cc}"
   ar="${cross_prefix}${ar}"
   strip="${cross_prefix}${strip}"
   objcopy="${cross_prefix}${objcopy}"
   ld="${cross_prefix}${ld}"
   
   # check that the C compiler works.
   cat > $TMPC <<EOF
   int main(void) {}
   EOF
   
   if $cc $ARCH_CFLAGS -c -o $TMPO $TMPC > /dev/null 2> /dev/null ; then
     : C compiler works ok
   else
       echo "ERROR: \"$cc\" either does not exist or does not work"
       exit 1
   fi
   
   check_define() {
   cat > $TMPC <<EOF
   #if !defined($1)
   #error Not defined
   #endif
   int main(void) { return 0; }
   EOF
     $cc $ARCH_CFLAGS -c -o $TMPO $TMPC > /dev/null 2> /dev/null
   }
   
   if check_define __i386__ ; then
     cpu="i386"
   elif check_define __x86_64__ ; then
     cpu="x86_64"
   elif check_define __sparc__ ; then
     # We can't check for 64 bit (when gcc is biarch) or V8PLUSA
     # They must be specified using --sparc_cpu
     if check_define __arch64__ ; then
       cpu="sparc64"
     else
       cpu="sparc"
     fi
   elif check_define _ARCH_PPC ; then
     if check_define _ARCH_PPC64 ; then
       cpu="ppc64"
     else
       cpu="ppc"
     fi
   else
     cpu=`uname -m`
   fi
   
 target_list=""  target_list=""
 case "$cpu" in  case "$cpu" in
   i386|i486|i586|i686|i86pc|BePC)    i386|i486|i586|i686|i86pc|BePC)
     cpu="i386"      cpu="i386"
   ;;    ;;
     x86_64|amd64)
       cpu="x86_64"
     ;;
     alpha)
       cpu="alpha"
     ;;
   armv*b)    armv*b)
     cpu="armv4b"      cpu="armv4b"
   ;;    ;;
   armv*l)    armv*l)
     cpu="armv4l"      cpu="armv4l"
   ;;    ;;
   alpha)    cris)
     cpu="alpha"      cpu="cris"
   ;;    ;;
   "Power Macintosh"|ppc|ppc64)    parisc|parisc64)
     cpu="powerpc"      cpu="hppa"
     ;;
     ia64)
       cpu="ia64"
     ;;
     m68k)
       cpu="m68k"
     ;;
     microblaze)
       cpu="microblaze"
   ;;    ;;
   mips)    mips)
     cpu="mips"      cpu="mips"
   ;;    ;;
   s390)    mips64)
       cpu="mips64"
     ;;
     ppc)
       cpu="ppc"
     ;;
     ppc64)
       cpu="ppc64"
     ;;
     s390*)
     cpu="s390"      cpu="s390"
   ;;    ;;
   sparc)    sparc|sun4[cdmuv])
     cpu="sparc"      cpu="sparc"
   ;;    ;;
   sparc64)    sparc64)
     cpu="sparc64"      cpu="sparc64"
   ;;    ;;
   ia64)  
     cpu="ia64"  
   ;;  
   m68k)  
     cpu="m68k"  
   ;;  
   x86_64|amd64)  
     cpu="x86_64"  
   ;;  
   *)    *)
     cpu="unknown"      cpu="unknown"
   ;;    ;;
 esac  esac
 gprof="no"  gprof="no"
   debug_tcg="no"
   debug="no"
   sparse="no"
   strip_opt="yes"
 bigendian="no"  bigendian="no"
 mingw32="no"  mingw32="no"
 EXESUF=""  EXESUF=""
 gdbstub="yes"  
 slirp="yes"  slirp="yes"
 adlib="no"  vde="yes"
 oss="no"  
 fmod="no"  
 fmod_lib=""  fmod_lib=""
 fmod_inc=""  fmod_inc=""
   oss_lib=""
   vnc_tls="yes"
   vnc_sasl="yes"
   bsd="no"
 linux="no"  linux="no"
   solaris="no"
 kqemu="no"  kqemu="no"
 kernel_path=""  profiler="no"
 cocoa="no"  cocoa="no"
 check_gfx="yes"  softmmu="yes"
   linux_user="no"
   darwin_user="no"
   bsd_user="no"
   build_docs="yes"
   uname_release=""
   curses="yes"
   curl="yes"
   pthread="yes"
   aio="yes"
   io_thread="no"
   nptl="yes"
   mixemu="no"
   bluez="yes"
   kvm="no"
   kerneldir=""
   aix="no"
   blobs="yes"
   fdt="yes"
   sdl="yes"
   sdl_x11="no"
   xen="yes"
   pkgversion=""
   
 # OS specific  # OS specific
 targetos=`uname -s`  if check_define __linux__ ; then
     targetos="Linux"
   elif check_define _WIN32 ; then
     targetos='MINGW32'
   elif check_define __OpenBSD__ ; then
     targetos='OpenBSD'
   elif check_define __sun__ ; then
     targetos='SunOS'
   else
     targetos=`uname -s`
   fi
 case $targetos in  case $targetos in
 CYGWIN*)  CYGWIN*)
 mingw32="yes"  mingw32="yes"
 CFLAGS="-O2 -mno-cygwin"  OS_CFLAGS="-mno-cygwin"
   if [ "$cpu" = "i386" ] ; then
       kqemu="yes"
   fi
   audio_possible_drivers="sdl"
 ;;  ;;
 MINGW32*)  MINGW32*)
 mingw32="yes"  mingw32="yes"
   if [ "$cpu" = "i386" ] ; then
       kqemu="yes"
   fi
   audio_possible_drivers="dsound sdl fmod"
   ;;
   GNU/kFreeBSD)
   audio_drv_list="oss"
   audio_possible_drivers="oss sdl esd pa"
   if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
       kqemu="yes"
   fi
 ;;  ;;
 FreeBSD)  FreeBSD)
 bsd="yes"  bsd="yes"
 oss="yes"  audio_drv_list="oss"
   audio_possible_drivers="oss sdl esd pa"
 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then  if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
     kqemu="yes"      kqemu="yes"
 fi  fi
 ;;  ;;
   DragonFly)
   bsd="yes"
   audio_drv_list="oss"
   audio_possible_drivers="oss sdl esd pa"
   if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
       kqemu="yes"
   fi
   aio="no"
   ;;
 NetBSD)  NetBSD)
 bsd="yes"  bsd="yes"
 oss="yes"  audio_drv_list="oss"
   audio_possible_drivers="oss sdl esd"
   oss_lib="-lossaudio"
 ;;  ;;
 OpenBSD)  OpenBSD)
 bsd="yes"  bsd="yes"
 oss="yes"  openbsd="yes"
   audio_drv_list="oss"
   audio_possible_drivers="oss sdl esd"
   oss_lib="-lossaudio"
 ;;  ;;
 Darwin)  Darwin)
 bsd="yes"  bsd="yes"
 darwin="yes"  darwin="yes"
   # on Leopard most of the system is 32-bit, so we have to ask the kernel it if we can run 64-bit userspace code
   if [ "$cpu" = "i386" ] ; then
       is_x86_64=`sysctl -n hw.optional.x86_64`
       [ "$is_x86_64" = "1" ] && cpu=x86_64
   fi
   if [ "$cpu" = "x86_64" ] ; then
       OS_CFLAGS="-arch x86_64"
       LDFLAGS="-arch x86_64"
   else
       OS_CFLAGS="-mdynamic-no-pic"
   fi
   darwin_user="yes"
   cocoa="yes"
   audio_drv_list="coreaudio"
   audio_possible_drivers="coreaudio sdl fmod"
   OS_LDFLAGS="-framework CoreFoundation -framework IOKit"
   ;;
   SunOS)
       solaris="yes"
       make="gmake"
       install="ginstall"
       needs_libsunmath="no"
       solarisrev=`uname -r | cut -f2 -d.`
       # have to select again, because `uname -m` returns i86pc
       # even on an x86_64 box.
       solariscpu=`isainfo -k`
       if test "${solariscpu}" = "amd64" ; then
           cpu="x86_64"
       fi
       if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
           if test "$solarisrev" -le 9 ; then
               if test -f /opt/SUNWspro/prod/lib/libsunmath.so.1; then
                   needs_libsunmath="yes"
               else
                   echo "QEMU will not link correctly on Solaris 8/X86 or 9/x86 without"
                   echo "libsunmath from the Sun Studio compilers tools, due to a lack of"
                   echo "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86"
                   echo "Studio 11 can be downloaded from www.sun.com."
                   exit 1
               fi
           fi
           if test "$solarisrev" -ge 9 ; then
               kqemu="yes"
           fi
       fi
       if test -f /usr/include/sys/soundcard.h ; then
           audio_drv_list="oss"
       fi
       audio_possible_drivers="oss sdl"
       OS_CFLAGS=-std=gnu99
 ;;  ;;
 *)   AIX)
 oss="yes"  aix="yes"
   make="gmake"
   ;;
   *)
   audio_drv_list="oss"
   audio_possible_drivers="oss alsa sdl esd pa"
 linux="yes"  linux="yes"
   linux_user="yes"
   usb="linux"
   kvm="yes"
 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then  if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
     kqemu="yes"      kqemu="yes"
       audio_possible_drivers="$audio_possible_drivers fmod"
 fi  fi
 ;;  ;;
 esac  esac
   
 if [ "$bsd" = "yes" ] ; then  if [ "$bsd" = "yes" ] ; then
   if [ ! "$darwin" = "yes" ] ; then    if [ "$darwin" != "yes" ] ; then
     make="gmake"      make="gmake"
       usb="bsd"
   fi    fi
     bsd_user="yes"
 fi  fi
   
 # find source path  # find source path
 # XXX: we assume an absolute path is given when launching configure,   source_path=`dirname "$0"`
 # except in './configure' case.  source_path_used="no"
 source_path=${0%configure}  workdir=`pwd`
 source_path=${source_path%/}  if [ -z "$source_path" ]; then
 source_path_used="yes"      source_path=$workdir
 if test -z "$source_path" -o "$source_path" = "." ; then  else
     source_path=`pwd`      source_path=`cd "$source_path"; pwd`
     source_path_used="no"  
 fi  fi
   [ -f "$workdir/vl.c" ] || source_path_used="yes"
   
   werror=""
   
 for opt do  for opt do
     optarg=`expr "x$opt" : 'x[^=]*=\(.*\)'`
   case "$opt" in    case "$opt" in
   --prefix=*) prefix=`echo $opt | cut -d '=' -f 2`    --help|-h) show_help=yes
   ;;    ;;
   --interp-prefix=*) interp_prefix=`echo $opt | cut -d '=' -f 2`    --prefix=*) prefix="$optarg"
   ;;    ;;
   --source-path=*) source_path=`echo $opt | cut -d '=' -f 2`    --interp-prefix=*) interp_prefix="$optarg"
   ;;    ;;
   --cross-prefix=*) cross_prefix=`echo $opt | cut -d '=' -f 2`    --source-path=*) source_path="$optarg"
     source_path_used="yes"
   ;;    ;;
   --cc=*) cc=`echo $opt | cut -d '=' -f 2`    --cross-prefix=*)
   ;;    ;;
   --host-cc=*) host_cc=`echo $opt | cut -d '=' -f 2`    --cc=*)
   ;;    ;;
   --make=*) make=`echo $opt | cut -d '=' -f 2`    --host-cc=*) host_cc="$optarg"
   ;;    ;;
   --extra-cflags=*) CFLAGS="${opt#--extra-cflags=}"    --make=*) make="$optarg"
   ;;    ;;
   --extra-ldflags=*) LDFLAGS="${opt#--extra-ldflags=}"    --install=*) install="$optarg"
   ;;    ;;
   --cpu=*) cpu=`echo $opt | cut -d '=' -f 2`    --extra-cflags=*) EXTRA_CFLAGS="$optarg"
   ;;    ;;
   --target-list=*) target_list=${opt#--target-list=}    --extra-ldflags=*) EXTRA_LDFLAGS="$optarg"
     ;;
     --cpu=*) cpu="$optarg"
     ;;
     --target-list=*) target_list="$optarg"
   ;;    ;;
   --enable-gprof) gprof="yes"    --enable-gprof) gprof="yes"
   ;;    ;;
Line 171  for opt do Line 398  for opt do
   ;;    ;;
   --disable-sdl) sdl="no"    --disable-sdl) sdl="no"
   ;;    ;;
   --enable-fmod) fmod="yes"    --fmod-lib=*) fmod_lib="$optarg"
     ;;
     --fmod-inc=*) fmod_inc="$optarg"
     ;;
     --oss-lib=*) oss_lib="$optarg"
     ;;
     --audio-card-list=*) audio_card_list=`echo "$optarg" | sed -e 's/,/ /g'`
     ;;
     --audio-drv-list=*) audio_drv_list="$optarg"
     ;;
     --enable-debug-tcg) debug_tcg="yes"
   ;;    ;;
   --fmod-lib=*) fmod_lib=${opt#--fmod-lib=}    --disable-debug-tcg) debug_tcg="no"
   ;;    ;;
   --fmod-inc=*) fmod_inc=${opt#--fmod-inc=}    --enable-debug)
         # Enable debugging options that aren't excessively noisy
         debug_tcg="yes"
         debug="yes"
         strip_opt="no"
     ;;
     --enable-sparse) sparse="yes"
     ;;
     --disable-sparse) sparse="no"
     ;;
     --disable-strip) strip_opt="no"
     ;;
     --disable-vnc-tls) vnc_tls="no"
     ;;
     --disable-vnc-sasl) vnc_sasl="no"
   ;;    ;;
   --enable-mingw32) mingw32="yes" ; cross_prefix="i386-mingw32-"  
   ;;   
   --disable-slirp) slirp="no"    --disable-slirp) slirp="no"
   ;;     ;;
   --enable-adlib) adlib="yes"    --disable-vde) vde="no"
   ;;     ;;
   --disable-kqemu) kqemu="no"    --disable-kqemu) kqemu="no"
   ;;     ;;
   --kernel-path=*) kernel_path=${opt#--kernel-path=}    --disable-xen) xen="no"
   ;;     ;;
   --enable-cocoa) cocoa="yes" ; sdl="no"    --disable-brlapi) brlapi="no"
   ;;     ;;
   --disable-gfx-check) check_gfx="no"    --disable-bluez) bluez="no"
     ;;
     --disable-kvm) kvm="no"
     ;;
     --enable-profiler) profiler="yes"
     ;;
     --enable-cocoa)
         cocoa="yes" ;
         sdl="no" ;
         audio_drv_list="coreaudio `echo $audio_drv_list | sed s,coreaudio,,g`"
     ;;
     --disable-system) softmmu="no"
     ;;
     --enable-system) softmmu="yes"
     ;;
     --disable-linux-user) linux_user="no"
     ;;
     --enable-linux-user) linux_user="yes"
     ;;
     --disable-darwin-user) darwin_user="no"
     ;;
     --enable-darwin-user) darwin_user="yes"
     ;;
     --disable-bsd-user) bsd_user="no"
     ;;
     --enable-bsd-user) bsd_user="yes"
     ;;
     --enable-uname-release=*) uname_release="$optarg"
     ;;
     --sparc_cpu=*)
         sparc_cpu="$optarg"
         case $sparc_cpu in
           v7|v8) SP_CFLAGS="-m32 -mcpu=${sparc_cpu} -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m32"
                    target_arch2="sparc"; cpu="sparc" ;;
           v8plus|v8plusa) SP_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m32"
                    target_arch2="sparc"; cpu="sparc" ;;
           v9)    SP_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_${sparc_cpu}__"; SP_LDFLAGS="-m64"
                    target_arch2="sparc64"; cpu="sparc64" ;;
           *)     echo "undefined SPARC architecture. Exiting";exit 1;;
         esac
     ;;
     --enable-werror) werror="yes"
     ;;
     --disable-werror) werror="no"
     ;;
     --disable-curses) curses="no"
     ;;
     --disable-curl) curl="no"
     ;;
     --disable-nptl) nptl="no"
     ;;
     --enable-mixemu) mixemu="yes"
     ;;
     --disable-pthread) pthread="no"
     ;;
     --disable-aio) aio="no"
     ;;
     --enable-io-thread) io_thread="yes"
     ;;
     --disable-blobs) blobs="no"
     ;;
     --kerneldir=*) kerneldir="$optarg"
     ;;
     --with-pkgversion=*) pkgversion=" ($optarg)"
     ;;
     --disable-docs) build_docs="no"
     ;;
     *) echo "ERROR: unknown option $opt"; show_help="yes"
   ;;    ;;
   esac    esac
 done  done
   
 # Checking for CFLAGS  # default flags for all hosts
 if test -z "$CFLAGS"; then  CFLAGS="$CFLAGS -g -fno-strict-aliasing"
     CFLAGS="-O2"  if test "$debug" = "no" ; then
     CFLAGS="$CFLAGS -O2"
   fi
   CFLAGS="$CFLAGS -Wall -Wundef -Wendif-labels -Wwrite-strings -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls"
   LDFLAGS="$LDFLAGS -g"
   
   # Consult white-list to determine whether to enable werror
   # by default.  Only enable by default for git builds
   if test -z "$werror" ; then
       z_version=`cut -f3 -d. $source_path/VERSION`
       if test "$z_version" = "50" -a \
           "$linux" = "yes" ; then
           werror="yes"
       else
           werror="no"
       fi
 fi  fi
   
 cc="${cross_prefix}${cc}"  if test "$werror" = "yes" ; then
 ar="${cross_prefix}${ar}"      CFLAGS="$CFLAGS -Werror"
 strip="${cross_prefix}${strip}"  fi
   
   if test "$solaris" = "no" ; then
       if ld --version 2>/dev/null | grep "GNU ld" >/dev/null 2>/dev/null ; then
           LDFLAGS="$LDFLAGS -Wl,--warn-common"
       fi
   fi
   
   #
   # If cpu ~= sparc and  sparc_cpu hasn't been defined, plug in the right
   # ARCH_CFLAGS/ARCH_LDFLAGS (assume sparc_v8plus for 32-bit and sparc_v9 for 64-bit)
   #
   case "$cpu" in
       sparc) if test -z "$sparc_cpu" ; then
                  ARCH_CFLAGS="-m32 -mcpu=ultrasparc -D__sparc_v8plus__"
                  ARCH_LDFLAGS="-m32"
              else
                  ARCH_CFLAGS="${SP_CFLAGS}"
                  ARCH_LDFLAGS="${SP_LDFLAGS}"
              fi
              ARCH_CFLAGS="$ARCH_CFLAGS -ffixed-g2 -ffixed-g3"
              if test "$solaris" = "no" ; then
                  ARCH_CFLAGS="$ARCH_CFLAGS -ffixed-g1 -ffixed-g6"
              fi
              ;;
       sparc64) if test -z "$sparc_cpu" ; then
                  ARCH_CFLAGS="-m64 -mcpu=ultrasparc -D__sparc_v9__"
                  ARCH_LDFLAGS="-m64"
              else
                  ARCH_CFLAGS="${SP_CFLAGS}"
                  ARCH_LDFLAGS="${SP_LDFLAGS}"
              fi
              if test "$solaris" = "no" ; then
                  ARCH_CFLAGS="$ARCH_CFLAGS -ffixed-g5 -ffixed-g6 -ffixed-g7"
              else
                  ARCH_CFLAGS="$ARCH_CFLAGS -ffixed-g1 -ffixed-g5 -ffixed-g6 -ffixed-g7"
              fi
              ;;
       s390)
              ARCH_CFLAGS="-march=z900"
              ;;
       i386)
              ARCH_CFLAGS="-m32"
              ARCH_LDFLAGS="-m32"
              ;;
       x86_64)
              ARCH_CFLAGS="-m64"
              ARCH_LDFLAGS="-m64"
              ;;
   esac
   
   if test x"$show_help" = x"yes" ; then
   cat << EOF
   
   Usage: configure [options]
   Options: [defaults in brackets after descriptions]
   
   EOF
   echo "Standard options:"
   echo "  --help                   print this message"
   echo "  --prefix=PREFIX          install in PREFIX [$prefix]"
   echo "  --interp-prefix=PREFIX   where to find shared libraries, etc."
   echo "                           use %M for cpu name [$interp_prefix]"
   echo "  --target-list=LIST       set target list [$target_list]"
   echo ""
   echo "kqemu kernel acceleration support:"
   echo "  --disable-kqemu          disable kqemu support"
   echo ""
   echo "Advanced options (experts only):"
   echo "  --source-path=PATH       path of source code [$source_path]"
   echo "  --cross-prefix=PREFIX    use PREFIX for compile tools [$cross_prefix]"
   echo "  --cc=CC                  use C compiler CC [$cc]"
   echo "  --host-cc=CC             use C compiler CC [$host_cc] for dyngen etc."
   echo "  --extra-cflags=CFLAGS    append extra C compiler flags CFLAGS"
   echo "  --extra-ldflags=LDFLAGS  append extra linker flags LDFLAGS"
   echo "  --make=MAKE              use specified make [$make]"
   echo "  --install=INSTALL        use specified install [$install]"
   echo "  --static                 enable static build [$static]"
   echo "  --enable-debug-tcg       enable TCG debugging"
   echo "  --disable-debug-tcg      disable TCG debugging (default)"
   echo "  --enable-debug           enable common debug build options"
   echo "  --enable-sparse          enable sparse checker"
   echo "  --disable-sparse         disable sparse checker (default)"
   echo "  --disable-strip          disable stripping binaries"
   echo "  --disable-werror         disable compilation abort on warning"
   echo "  --disable-sdl            disable SDL"
   echo "  --enable-cocoa           enable COCOA (Mac OS X only)"
   echo "  --audio-drv-list=LIST    set audio drivers list:"
   echo "                           Available drivers: $audio_possible_drivers"
   echo "  --audio-card-list=LIST   set list of emulated audio cards [$audio_card_list]"
   echo "                           Available cards: $audio_possible_cards"
   echo "  --enable-mixemu          enable mixer emulation"
   echo "  --disable-xen            disable xen backend driver support"
   echo "  --disable-brlapi         disable BrlAPI"
   echo "  --disable-vnc-tls        disable TLS encryption for VNC server"
   echo "  --disable-vnc-sasl       disable SASL encryption for VNC server"
   echo "  --disable-curses         disable curses output"
   echo "  --disable-curl           disable curl connectivity"
   echo "  --disable-bluez          disable bluez stack connectivity"
   echo "  --disable-kvm            disable KVM acceleration support"
   echo "  --disable-nptl           disable usermode NPTL support"
   echo "  --enable-system          enable all system emulation targets"
   echo "  --disable-system         disable all system emulation targets"
   echo "  --enable-linux-user      enable all linux usermode emulation targets"
   echo "  --disable-linux-user     disable all linux usermode emulation targets"
   echo "  --enable-darwin-user     enable all darwin usermode emulation targets"
   echo "  --disable-darwin-user    disable all darwin usermode emulation targets"
   echo "  --enable-bsd-user        enable all BSD usermode emulation targets"
   echo "  --disable-bsd-user       disable all BSD usermode emulation targets"
   echo "  --fmod-lib               path to FMOD library"
   echo "  --fmod-inc               path to FMOD includes"
   echo "  --oss-lib                path to OSS library"
   echo "  --enable-uname-release=R Return R for uname -r in usermode emulation"
   echo "  --sparc_cpu=V            Build qemu for Sparc architecture v7, v8, v8plus, v8plusa, v9"
   echo "  --disable-vde            disable support for vde network"
   echo "  --disable-pthread        disable pthread support"
   echo "  --disable-aio            disable AIO support"
   echo "  --enable-io-thread       enable IO thread"
   echo "  --disable-blobs          disable installing provided firmware blobs"
   echo "  --kerneldir=PATH         look for kernel includes in PATH"
   echo ""
   echo "NOTE: The object files are built at the place where configure is launched"
   exit 1
   fi
   
 if test "$mingw32" = "yes" ; then  if test "$mingw32" = "yes" ; then
     linux="no"      linux="no"
     EXESUF=".exe"      EXESUF=".exe"
     gdbstub="no"  
     oss="no"      oss="no"
     if [ "$cpu" = "i386" ] ; then      linux_user="no"
         kqemu="yes"      bsd_user="no"
       OS_CFLAGS="$OS_CFLAGS -DWIN32_LEAN_AND_MEAN -DWINVER=0x501"
   fi
   
   if test ! -x "$(which cgcc 2>/dev/null)"; then
       sparse="no"
   fi
   
   #
   # Solaris specific configure tool chain decisions
   #
   if test "$solaris" = "yes" ; then
     solinst=`which $install 2> /dev/null | /usr/bin/grep -v "no $install in"`
     if test -z "$solinst" ; then
       echo "Solaris install program not found. Use --install=/usr/ucb/install or"
       echo "install fileutils from www.blastwave.org using pkg-get -i fileutils"
       echo "to get ginstall which is used by default (which lives in /opt/csw/bin)"
       exit 1
     fi
     if test "$solinst" = "/usr/sbin/install" ; then
       echo "Error: Solaris /usr/sbin/install is not an appropriate install program."
       echo "try ginstall from the GNU fileutils available from www.blastwave.org"
       echo "using pkg-get -i fileutils, or use --install=/usr/ucb/install"
       exit 1
     fi
     sol_ar=`which ar 2> /dev/null | /usr/bin/grep -v "no ar in"`
     if test -z "$sol_ar" ; then
       echo "Error: No path includes ar"
       if test -f /usr/ccs/bin/ar ; then
         echo "Add /usr/ccs/bin to your path and rerun configure"
     fi      fi
       exit 1
     fi
 fi  fi
   
   
 if test -z "$target_list" ; then  if test -z "$target_list" ; then
 # these targets are portable  # these targets are portable
     target_list="i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu"      if [ "$softmmu" = "yes" ] ; then
           target_list="\
   i386-softmmu \
   x86_64-softmmu \
   arm-softmmu \
   cris-softmmu \
   m68k-softmmu \
   microblaze-softmmu \
   mips-softmmu \
   mipsel-softmmu \
   mips64-softmmu \
   mips64el-softmmu \
   ppc-softmmu \
   ppcemb-softmmu \
   ppc64-softmmu \
   sh4-softmmu \
   sh4eb-softmmu \
   sparc-softmmu \
   sparc64-softmmu \
   "
       fi
 # the following are Linux specific  # the following are Linux specific
     if [ "$linux" = "yes" ] ; then      if [ "$linux_user" = "yes" ] ; then
         target_list="i386-user arm-user armeb-user sparc-user ppc-user $target_list"          target_list="${target_list}\
   i386-linux-user \
   x86_64-linux-user \
   alpha-linux-user \
   arm-linux-user \
   armeb-linux-user \
   cris-linux-user \
   m68k-linux-user \
   microblaze-linux-user \
   mips-linux-user \
   mipsel-linux-user \
   ppc-linux-user \
   ppc64-linux-user \
   ppc64abi32-linux-user \
   sh4-linux-user \
   sh4eb-linux-user \
   sparc-linux-user \
   sparc64-linux-user \
   sparc32plus-linux-user \
   "
       fi
   # the following are Darwin specific
       if [ "$darwin_user" = "yes" ] ; then
           target_list="$target_list i386-darwin-user ppc-darwin-user "
       fi
   # the following are BSD specific
       if [ "$bsd_user" = "yes" ] ; then
           target_list="${target_list}\
   i386-bsd-user \
   x86_64-bsd-user \
   sparc-bsd-user \
   sparc64-bsd-user \
   "
     fi      fi
 else  else
     target_list=$(echo "$target_list" | sed -e 's/,/ /g')      target_list=`echo "$target_list" | sed -e 's/,/ /g'`
   fi
   if test -z "$target_list" ; then
       echo "No targets enabled"
       exit 1
 fi  fi
   
 if test -z "$cross_prefix" ; then  if test -z "$cross_prefix" ; then
Line 231  if test -z "$cross_prefix" ; then Line 772  if test -z "$cross_prefix" ; then
 cat > $TMPC << EOF  cat > $TMPC << EOF
 #include <inttypes.h>  #include <inttypes.h>
 int main(int argc, char ** argv){  int main(int argc, char ** argv){
         volatile uint32_t i=0x01234567;          volatile uint32_t i=0x01234567;
         return (*((uint8_t*)(&i))) == 0x67;          return (*((uint8_t*)(&i))) == 0x67;
 }  }
 EOF  EOF
   
 if $cc -o $TMPE $TMPC 2>/dev/null ; then  if $cc $ARCH_CFLAGS -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
 $TMPE && bigendian="yes"  $TMPE && bigendian="yes"
 else  else
 echo big/little test failed  echo big/little test failed
Line 245  fi Line 786  fi
 else  else
   
 # if cross compiling, cannot launch a program, so make a static guess  # if cross compiling, cannot launch a program, so make a static guess
 if test "$cpu" = "powerpc" -o "$cpu" = "mips" -o "$cpu" = "s390" -o "$cpu" = "sparc" -o "$cpu" = "sparc64" -o "$cpu" = "m68k" -o "$cpu" = "armv4b"; then  if test "$cpu" = "armv4b" \
        -o "$cpu" = "hppa" \
        -o "$cpu" = "m68k" \
        -o "$cpu" = "mips" \
        -o "$cpu" = "mips64" \
        -o "$cpu" = "ppc" \
        -o "$cpu" = "ppc64" \
        -o "$cpu" = "s390" \
        -o "$cpu" = "sparc" \
        -o "$cpu" = "sparc64"; then
     bigendian="yes"      bigendian="yes"
 fi  fi
   
Line 253  fi Line 803  fi
   
 # host long bits test  # host long bits test
 hostlongbits="32"  hostlongbits="32"
 if test "$cpu" = "sparc64" -o "$cpu" = "ia64" -o "$cpu" = "x86_64" -o "$cpu" = "alpha"; then  if test "$cpu" = "x86_64" \
        -o "$cpu" = "alpha" \
        -o "$cpu" = "ia64" \
        -o "$cpu" = "sparc64" \
        -o "$cpu" = "ppc64"; then
     hostlongbits="64"      hostlongbits="64"
 fi  fi
   
 # check gcc options support  # Check host NPTL support
 cat > $TMPC <<EOF  cat > $TMPC <<EOF
 int main(void) {  #include <sched.h>
   #include <linux/futex.h>
   void foo()
   {
   #if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
   #error bork
   #endif
 }  }
 EOF  EOF
   
 have_gcc3_options="no"  if $cc $ARCH_CFLAGS -c -o $TMPO $TMPC > /dev/null 2> /dev/null ; then
 if $cc -fno-reorder-blocks -fno-optimize-sibling-calls -o $TMPO $TMPC 2> /dev/null ; then    :
    have_gcc3_options="yes"  else
      nptl="no"
   fi
   
   ##########################################
   # zlib check
   
   cat > $TMPC << EOF
   #include <zlib.h>
   int main(void) { zlibVersion(); return 0; }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $TMPC -lz > /dev/null 2> /dev/null ; then
       :
   else
       echo
       echo "Error: zlib check failed"
       echo "Make sure to have the zlib libs and headers installed."
       echo
       exit 1
   fi
   
   ##########################################
   # xen probe
   
   if test "$xen" = "yes" ; then
   cat > $TMPC <<EOF
   #include <xenctrl.h>
   #include <xs.h>
   int main(void) { xs_daemon_open(); xc_interface_open(); return 0; }
   EOF
      if $cc $CFLAGS $ARCH_CFLAGS -c -o $TMPO $TMPC $LDFLAGS -lxenstore -lxenctrl 2> /dev/null > /dev/null ; then
         :
      else
         xen="no"
      fi
 fi  fi
   
 ##########################################  ##########################################
Line 273  fi Line 867  fi
   
 sdl_too_old=no  sdl_too_old=no
   
 if test -z "$sdl" ; then  if test "$sdl" = "yes" ; then
       sdl_config="sdl-config"
       sdl=no
       sdl_static=no
   
 sdl_config="sdl-config"  
 sdl=no  
 sdl_static=no  
   
 if test "$mingw32" = "yes" -a ! -z "$cross_prefix" ; then  
 # win32 cross compilation case  
     sdl_config="i386-mingw32msvc-sdl-config"  
     sdl=yes  
 else  
 # normal SDL probe  
 cat > $TMPC << EOF  cat > $TMPC << EOF
 #include <SDL.h>  #include <SDL.h>
 #undef main /* We don't want SDL to override our main() */  #undef main /* We don't want SDL to override our main() */
 int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }  int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
 EOF  EOF
       if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} `$sdl_config --cflags 2> /dev/null` $TMPC `$sdl_config --libs 2> /dev/null` > $TMPSDLLOG 2>&1 ; then
           _sdlversion=`$sdl_config --version | sed 's/[^0-9]//g'`
           if test "$_sdlversion" -lt 121 ; then
               sdl_too_old=yes
           else
               if test "$cocoa" = "no" ; then
                   sdl=yes
               fi
           fi
   
 if $cc -o $TMPE `$sdl_config --cflags 2> /dev/null` $TMPC `$sdl_config --libs 2> /dev/null` 2> /dev/null ; then          # static link with sdl ?
 _sdlversion=`$sdl_config --version | sed 's/[^0-9]//g'`          if test "$sdl" = "yes" ; then
 if test "$_sdlversion" -lt 121 ; then              aa="no"
 sdl_too_old=yes              `$sdl_config --static-libs 2>/dev/null | grep \\\-laa > /dev/null` && aa="yes"
               sdl_static_libs=`$sdl_config --static-libs 2>/dev/null`
               if [ "$aa" = "yes" ] ; then
                   sdl_static_libs="$sdl_static_libs `aalib-config --static-libs`"
               fi
   
               if $cc -o $TMPE ${OS_CFLAGS} `$sdl_config --cflags 2> /dev/null` $TMPC $sdl_static_libs > /dev/null 2> /dev/null; then
                   sdl_static=yes
               fi
           fi # static link
       fi # sdl compile test
 else  else
 sdl=yes      # Make sure to disable cocoa if sdl was set
 fi      if test "$sdl" = "yes" ; then
          cocoa="no"
          audio_drv_list="`echo $audio_drv_list | sed s,coreaudio,,g`"
       fi
   fi # -z $sdl
   
 # static link with sdl ?  
 if test "$sdl" = "yes" ; then  if test "$sdl" = "yes" ; then
 aa="no"  cat > $TMPC <<EOF
 `$sdl_config --static-libs | grep \\\-laa > /dev/null` && aa="yes"  #include <SDL.h>
 sdl_static_libs=`$sdl_config --static-libs`  #if defined(SDL_VIDEO_DRIVER_X11)
 if [ "$aa" = "yes" ] ; then  #include <X11/XKBlib.h>
   sdl_static_libs="$sdl_static_libs `aalib-config --static-libs`"  #else
   #error No x11 support
   #endif
   int main(void) { return 0; }
   EOF
       if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} `$sdl_config --cflags 2> /dev/null` $TMPC `$sdl_config --libs 2> /dev/null` > /dev/null 2>&1 ; then
           sdl_x11="yes"
       fi
 fi  fi
   
 if $cc -o $TMPE `$sdl_config --cflags 2> /dev/null` $TMPC $sdl_static_libs 2> /dev/null; then  ##########################################
   sdl_static=yes  # VNC TLS detection
   if test "$vnc_tls" = "yes" ; then
   cat > $TMPC <<EOF
   #include <gnutls/gnutls.h>
   int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0; }
   EOF
       vnc_tls_cflags=`pkg-config --cflags gnutls 2> /dev/null`
       vnc_tls_libs=`pkg-config --libs gnutls 2> /dev/null`
       if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $vnc_tls_cflags $TMPC \
              $vnc_tls_libs > /dev/null 2> /dev/null ; then
           :
       else
           vnc_tls="no"
       fi
 fi  fi
   
 fi # static link  ##########################################
   # VNC SASL detection
   if test "$vnc_sasl" = "yes" ; then
   cat > $TMPC <<EOF
   #include <sasl/sasl.h>
   #include <stdio.h>
   int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
   EOF
       # Assuming Cyrus-SASL installed in /usr prefix
       vnc_sasl_cflags=""
       vnc_sasl_libs="-lsasl2"
       if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $vnc_sasl_cflags $TMPC \
              $vnc_sasl_libs 2> /dev/null > /dev/null ; then
           :
       else
           vnc_sasl="no"
       fi
   fi
   
 fi # sdl compile test  ##########################################
   # fnmatch() probe, used for ACL routines
   fnmatch="no"
   cat > $TMPC << EOF
   #include <fnmatch.h>
   int main(void)
   {
       fnmatch("foo", "foo", 0);
       return 0;
   }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
      fnmatch="yes"
   fi
   
 fi # cross compilation  ##########################################
 fi # -z $sdl  # vde libraries probe
   if test "$vde" = "yes" ; then
     cat > $TMPC << EOF
   #include <libvdeplug.h>
   int main(void)
   {
       struct vde_open_args a = {0, 0, 0};
       vde_open("", "", &a);
       return 0;
   }
   EOF
       if $cc $ARCH_CFLAGS -o $TMPE $TMPC -lvdeplug > /dev/null 2> /dev/null ; then
           :
       else
           vde="no"
       fi
   fi
   
 if test x"$1" = x"-h" -o x"$1" = x"--help" ; then  ##########################################
 cat << EOF  # Sound support libraries probe
   
 Usage: configure [options]  audio_drv_probe()
 Options: [defaults in brackets after descriptions]  {
       drv=$1
       hdr=$2
       lib=$3
       exp=$4
       cfl=$5
           cat > $TMPC << EOF
   #include <$hdr>
   int main(void) { $exp }
   EOF
       if $cc $ARCH_CFLAGS $cfl -o $TMPE $TMPC $lib > /dev/null 2> /dev/null ; then
           :
       else
           echo
           echo "Error: $drv check failed"
           echo "Make sure to have the $drv libs and headers installed."
           echo
           exit 1
       fi
   }
   
   audio_drv_list=`echo "$audio_drv_list" | sed -e 's/,/ /g'`
   for drv in $audio_drv_list; do
       case $drv in
       alsa)
       audio_drv_probe $drv alsa/asoundlib.h -lasound \
           "snd_pcm_t **handle; return snd_pcm_close(*handle);"
       ;;
   
       fmod)
       if test -z $fmod_lib || test -z $fmod_inc; then
           echo
           echo "Error: You must specify path to FMOD library and headers"
           echo "Example: --fmod-inc=/path/include/fmod --fmod-lib=/path/lib/libfmod-3.74.so"
           echo
           exit 1
       fi
       audio_drv_probe $drv fmod.h $fmod_lib "return FSOUND_GetVersion();" "-I $fmod_inc"
       ;;
   
       esd)
       audio_drv_probe $drv esd.h -lesd 'return esd_play_stream(0, 0, "", 0);'
       ;;
   
       pa)
       audio_drv_probe $drv pulse/simple.h -lpulse-simple \
           "pa_simple *s = NULL; pa_simple_free(s); return 0;"
       ;;
   
       oss|sdl|core|wav|dsound)
       # XXX: Probes for CoreAudio, DirectSound, SDL(?)
       ;;
   
       *)
       echo "$audio_possible_drivers" | grep -q "\<$drv\>" || {
           echo
           echo "Error: Unknown driver '$drv' selected"
           echo "Possible drivers are: $audio_possible_drivers"
           echo
           exit 1
       }
       ;;
       esac
   done
   
   ##########################################
   # BrlAPI probe
   
   if test -z "$brlapi" ; then
       brlapi=no
   cat > $TMPC << EOF
   #include <brlapi.h>
   int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
 EOF  EOF
 echo "Standard options:"      if $cc ${ARCH_CFLAGS} -o $TMPE ${OS_CFLAGS} $TMPC -lbrlapi > /dev/null 2> /dev/null ; then
 echo "  --help                   print this message"              brlapi=yes
 echo "  --prefix=PREFIX          install in PREFIX [$prefix]"      fi # brlapi compile test
 echo "  --interp-prefix=PREFIX   where to find shared libraries, etc."  fi # -z $brlapi
 echo "                           use %M for cpu name [$interp_prefix]"  
 echo "  --target-list=LIST       set target list [$target_list]"  ##########################################
 echo ""  # curses probe
 echo "kqemu kernel acceleration support:"  
 echo "  --disable-kqemu          disable kqemu build"  if test "$curses" = "yes" ; then
 echo "  --kernel-path=PATH       set the kernel path (configure probes it)"    curses=no
 echo ""    ncurses=no
 echo "Advanced options (experts only):"    cat > $TMPC << EOF
 echo "  --source-path=PATH       path of source code [$source_path]"  #include <curses.h>
 echo "  --cross-prefix=PREFIX    use PREFIX for compile tools [$cross_prefix]"  #ifdef __OpenBSD__
 echo "  --cc=CC                  use C compiler CC [$cc]"  #define resize_term resizeterm
 echo "  --host-cc=CC             use C compiler CC [$cc] for dyngen etc."  #endif
 echo "  --make=MAKE              use specified make [$make]"  int main(void) { resize_term(0, 0); return curses_version(); }
 echo "  --static                 enable static build [$static]"  EOF
 echo "  --enable-mingw32         enable Win32 cross compilation with mingw32"    if $cc $ARCH_CFLAGS -o $TMPE $TMPC -lncurses > /dev/null 2> /dev/null ; then
 echo "  --enable-adlib           enable Adlib emulation"      curses=yes
 echo "  --enable-fmod            enable FMOD audio output driver"      ncurses=yes
 echo "  --fmod-lib               path to FMOD library"    elif $cc $ARCH_CFLAGS -o $TMPE $TMPC -lcurses > /dev/null 2> /dev/null ; then
 echo "  --fmod-inc               path to FMOD includes"      curses=yes
 echo ""    fi
 echo "NOTE: The object files are build at the place where configure is launched"  fi # test "$curses"
 exit 1  
   ##########################################
   # curl probe
   
   if test "$curl" = "yes" ; then
     curl=no
     cat > $TMPC << EOF
   #include <curl/curl.h>
   int main(void) { return curl_easy_init(); }
   EOF
     curl_libs=`curl-config --libs 2>/dev/null`
    if $cc $ARCH_CFLAGS $curl_libs -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
       curl=yes
     fi
   fi # test "$curl"
   
   ##########################################
   # bluez support probe
   if test "$bluez" = "yes" ; then
     `pkg-config bluez 2> /dev/null` || bluez="no"
   fi
   if test "$bluez" = "yes" ; then
     cat > $TMPC << EOF
   #include <bluetooth/bluetooth.h>
   int main(void) { return bt_error(0); }
   EOF
     bluez_cflags=`pkg-config --cflags bluez 2> /dev/null`
     bluez_libs=`pkg-config --libs bluez 2> /dev/null`
     if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $bluez_cflags $TMPC \
         $bluez_libs > /dev/null 2> /dev/null ; then
       :
     else
       bluez="no"
     fi
 fi  fi
   
 if test "$mingw32" = "yes" ; then  ##########################################
 if test -z "$prefix" ; then  # kvm probe
     prefix="/c/Program Files/Qemu"  if test "$kvm" = "yes" ; then
       cat > $TMPC <<EOF
   #include <linux/kvm.h>
   #if !defined(KVM_API_VERSION) || KVM_API_VERSION < 12 || KVM_API_VERSION > 12
   #error Invalid KVM version
   #endif
   #if !defined(KVM_CAP_USER_MEMORY)
   #error Missing KVM capability KVM_CAP_USER_MEMORY
   #endif
   #if !defined(KVM_CAP_SET_TSS_ADDR)
   #error Missing KVM capability KVM_CAP_SET_TSS_ADDR
   #endif
   #if !defined(KVM_CAP_DESTROY_MEMORY_REGION_WORKS)
   #error Missing KVM capability KVM_CAP_DESTROY_MEMORY_REGION_WORKS
   #endif
   int main(void) { return 0; }
   EOF
     if test "$kerneldir" != "" ; then
         kvm_cflags=-I"$kerneldir"/include
         if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) \
            -a -d "$kerneldir/arch/x86/include" ; then
               kvm_cflags="$kvm_cflags -I$kerneldir/arch/x86/include"
           elif test "$cpu" = "ppc" -a -d "$kerneldir/arch/powerpc/include" ; then
               kvm_cflags="$kvm_cflags -I$kerneldir/arch/powerpc/include"
           elif test -d "$kerneldir/arch/$cpu/include" ; then
               kvm_cflags="$kvm_cflags -I$kerneldir/arch/$cpu/include"
         fi
     else
         kvm_cflags=""
     fi
     if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $kvm_cflags $TMPC \
         > /dev/null 2>/dev/null ; then
       :
     else
       kvm="no";
       if [ -x "`which awk 2>/dev/null`" ] && \
          [ -x "`which grep 2>/dev/null`" ]; then
         kvmerr=`LANG=C $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $kvm_cflags $TMPC 2>&1 \
           | grep "error: " \
           | awk -F "error: " '{if (NR>1) printf(", "); printf("%s",$2);}'`
         if test "$kvmerr" != "" ; then
           kvm="no - (${kvmerr})\n\
       NOTE: To enable KVM support, update your kernel to 2.6.29+ or install \
   recent kvm-kmod from http://sourceforge.net/projects/kvm."
         fi
       fi
     fi
 fi  fi
 mandir="$prefix"  
 datadir="$prefix"  ##########################################
 docdir="$prefix"  # pthread probe
 bindir="$prefix"  PTHREADLIBS_LIST="-lpthread -lpthreadGC2"
 else  PTHREADLIBS=""
 if test -z "$prefix" ; then  
     prefix="/usr/local"  if test "$pthread" = yes; then
     pthread=no
   cat > $TMPC << EOF
   #include <pthread.h>
   int main(void) { pthread_create(0,0,0,0); return 0; }
   EOF
     for pthread_lib in $PTHREADLIBS_LIST; do
       if $cc $ARCH_CFLAGS -o $TMPE $TMPC $pthread_lib 2> /dev/null > /dev/null ; then
         pthread=yes
         PTHREADLIBS="$pthread_lib"
         break
       fi
     done
 fi  fi
 mandir="$prefix/share/man"  
 datadir="$prefix/share/qemu"  if test "$pthread" = no; then
 docdir="$prefix/share/doc/qemu"     aio=no
 bindir="$prefix/bin"     io_thread=no
 fi  fi
   
 # kqemu support  ##########################################
 if test $kqemu = "yes" ; then  # iovec probe
     # test if the source code is installed  cat > $TMPC <<EOF
     if test '!' -f "kqemu/Makefile" ; then   #include <sys/types.h>
         kqemu="no"  #include <sys/uio.h>
     fi  #include <unistd.h>
   int main(void) { struct iovec iov; return 0; }
   EOF
   iovec=no
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
     iovec=yes
 fi  fi
     
 # Linux specific kqemu configuration  ##########################################
 if test $kqemu = "yes" -a $linux = "yes" ; then  # preadv probe
 # find the kernel path  cat > $TMPC <<EOF
 if test -z "$kernel_path" ; then  #include <sys/types.h>
 kernel_version=`uname -r`  #include <sys/uio.h>
 kernel_path="/lib/modules/$kernel_version/build"  #include <unistd.h>
 if test '!' -d "$kernel_path/include" ; then   int main(void) { preadv; }
     kernel_path="/usr/src/linux"  EOF
     if test '!' -d "$kernel_path/include" ; then   preadv=no
         echo "Could not find kernel includes in /lib/modules or /usr/src/linux - cannot build the kqemu module"  if $cc $ARCH_CFLAGS -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
         kqemu="no"    preadv=yes
     fi  
 fi  fi
   
   ##########################################
   # fdt probe
   if test "$fdt" = "yes" ; then
       fdt=no
       cat > $TMPC << EOF
   int main(void) { return 0; }
   EOF
     if $cc $ARCH_CFLAGS -o $TMPE ${OS_CFLAGS} $TMPC -lfdt 2> /dev/null > /dev/null ; then
       fdt=yes
     fi
 fi  fi
   
 if test $kqemu = "yes" ; then  #
   # Check for xxxat() functions when we are building linux-user
   # emulator.  This is done because older glibc versions don't
   # have syscall stubs for these implemented.
   #
   atfile=no
   cat > $TMPC << EOF
   #define _ATFILE_SOURCE
   #include <sys/types.h>
   #include <fcntl.h>
   #include <unistd.h>
   
   int
   main(void)
   {
           /* try to unlink nonexisting file */
           return (unlinkat(AT_FDCWD, "nonexistent_file", 0));
   }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null > /dev/null ; then
     atfile=yes
   fi
   
 # test that the kernel config is present  # Check for inotify functions when we are building linux-user
 if test '!' -f "$kernel_path/Makefile" ; then  # emulator.  This is done because older glibc versions don't
     echo "No Makefile file present in $kernel_path - kqemu cannot be built"  # have syscall stubs for these implemented.  In that case we
     kqemu="no"  # don't provide them even if kernel supports them.
 fi      #
   inotify=no
   cat > $TMPC << EOF
   #include <sys/inotify.h>
   
 # find build system (2.6 or legacy)  int
 kbuild26="yes"  main(void)
 if grep -q "PATCHLEVEL = 4" $kernel_path/Makefile ; then  {
 kbuild26="no"          /* try to start inotify */
           return inotify_init();
   }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null > /dev/null ; then
     inotify=yes
 fi  fi
   
 fi # kqemu  # check if utimensat and futimens are supported
   utimens=no
   cat > $TMPC << EOF
   #define _ATFILE_SOURCE
   #define _GNU_SOURCE
   #include <stddef.h>
   #include <fcntl.h>
   
   int main(void)
   {
       utimensat(AT_FDCWD, "foo", NULL, 0);
       futimens(0, NULL);
       return 0;
   }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
     utimens=yes
   fi
   
 fi # kqemu and linux  # check if pipe2 is there
   pipe2=no
   cat > $TMPC << EOF
   #define _GNU_SOURCE
   #include <unistd.h>
   #include <fcntl.h>
   
   int main(void)
   {
       int pipefd[2];
       pipe2(pipefd, O_CLOEXEC);
       return 0;
   }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
     pipe2=yes
   fi
   
   # check if tee/splice is there. vmsplice was added same time.
   splice=no
   cat > $TMPC << EOF
   #define _GNU_SOURCE
   #include <unistd.h>
   #include <fcntl.h>
   #include <limits.h>
   
   int main(void)
   {
       int len, fd;
       len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
       splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
       return 0;
   }
   EOF
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC 2> /dev/null ; then
     splice=yes
   fi
   
   # Check if tools are available to build documentation.
   if test "$build_docs" = "yes" -a \( ! -x "`which texi2html 2>/dev/null`" -o ! -x "`which pod2man 2>/dev/null`" \) ; then
     build_docs="no"
   fi
   
   ##########################################
   # Do we need librt
   CLOCKLIBS=""
   cat > $TMPC <<EOF
   #include <signal.h>
   #include <time.h>
   int main(void) { clockid_t id; return clock_gettime(id, NULL); }
   EOF
   
   rt=no
   if $cc $ARCH_CFLAGS -o $TMPE $TMPC > /dev/null 2> /dev/null ; then
     :
   elif $cc $ARCH_CFLAGS -o $TMPE $TMPC -lrt > /dev/null 2> /dev/null ; then
     rt=yes
   fi
   
   if test "$rt" = "yes" ; then
     CLOCKLIBS="-lrt"
   fi
   
   if test "$mingw32" = "yes" ; then
     if test -z "$prefix" ; then
         prefix="c:/Program Files/Qemu"
     fi
     mansuffix=""
     datasuffix=""
     docsuffix=""
     binsuffix=""
   else
     if test -z "$prefix" ; then
         prefix="/usr/local"
     fi
     mansuffix="/share/man"
     datasuffix="/share/qemu"
     docsuffix="/share/doc/qemu"
     binsuffix="/bin"
   fi
   
 echo "Install prefix    $prefix"  echo "Install prefix    $prefix"
 echo "BIOS directory    $datadir"  echo "BIOS directory    $prefix$datasuffix"
 echo "binary directory  $bindir"  echo "binary directory  $prefix$binsuffix"
 if test "$mingw32" = "no" ; then  if test "$mingw32" = "no" ; then
 echo "Manual directory  $mandir"  echo "Manual directory  $prefix$mansuffix"
 echo "ELF interp prefix $interp_prefix"  echo "ELF interp prefix $interp_prefix"
 fi  fi
 echo "Source path       $source_path"  echo "Source path       $source_path"
 echo "C compiler        $cc"  echo "C compiler        $cc"
 echo "Host C compiler   $host_cc"  echo "Host C compiler   $host_cc"
   echo "ARCH_CFLAGS       $ARCH_CFLAGS"
 echo "make              $make"  echo "make              $make"
   echo "install           $install"
 echo "host CPU          $cpu"  echo "host CPU          $cpu"
 echo "host big endian   $bigendian"  echo "host big endian   $bigendian"
 echo "target list       $target_list"  echo "target list       $target_list"
   echo "tcg debug enabled $debug_tcg"
 echo "gprof enabled     $gprof"  echo "gprof enabled     $gprof"
   echo "sparse enabled    $sparse"
   echo "strip binaries    $strip_opt"
   echo "profiler          $profiler"
 echo "static build      $static"  echo "static build      $static"
   echo "-Werror enabled   $werror"
 if test "$darwin" = "yes" ; then  if test "$darwin" = "yes" ; then
     echo "Cocoa support     $cocoa"      echo "Cocoa support     $cocoa"
 fi  fi
Line 437  echo "SDL support       $sdl" Line 1420  echo "SDL support       $sdl"
 if test "$sdl" != "no" ; then  if test "$sdl" != "no" ; then
     echo "SDL static link   $sdl_static"      echo "SDL static link   $sdl_static"
 fi  fi
   echo "curses support    $curses"
   echo "curl support      $curl"
 echo "mingw32 support   $mingw32"  echo "mingw32 support   $mingw32"
 echo "Adlib support     $adlib"  echo "Audio drivers     $audio_drv_list"
 echo -n "FMOD support      $fmod"  echo "Extra audio cards $audio_card_list"
 if test $fmod = "yes"; then  echo "Mixer emulation   $mixemu"
     echo -n " (lib='$fmod_lib' include='$fmod_inc')"  echo "VNC TLS support   $vnc_tls"
 fi  if test "$vnc_tls" = "yes" ; then
 echo ""      echo "    TLS CFLAGS    $vnc_tls_cflags"
 echo "kqemu support     $kqemu"      echo "    TLS LIBS      $vnc_tls_libs"
 if test $kqemu = "yes" -a $linux = "yes" ; then  fi
 echo ""  echo "VNC SASL support  $vnc_sasl"
 echo "KQEMU Linux module configuration:"  if test "$vnc_sasl" = "yes" ; then
 echo "kernel sources    $kernel_path"      echo "    SASL CFLAGS    $vnc_sasl_cflags"
 echo -n "kbuild type       "      echo "    SASL LIBS      $vnc_sasl_libs"
 if test $kbuild26 = "yes"; then  
 echo "2.6"  
 else  
 echo "2.4"  
 fi  fi
   if test -n "$sparc_cpu"; then
       echo "Target Sparc Arch $sparc_cpu"
 fi  fi
   echo "kqemu support     $kqemu"
   echo "xen support       $xen"
   echo "brlapi support    $brlapi"
   echo "Documentation     $build_docs"
   [ ! -z "$uname_release" ] && \
   echo "uname -r          $uname_release"
   echo "NPTL support      $nptl"
   echo "vde support       $vde"
   echo "AIO support       $aio"
   echo "IO thread         $io_thread"
   echo "Install blobs     $blobs"
   echo -e "KVM support       $kvm"
   echo "fdt support       $fdt"
   echo "preadv support    $preadv"
   
 if test $sdl_too_old = "yes"; then  if test $sdl_too_old = "yes"; then
 echo "-> Your SDL version is too old - please upgrade to have SDL support"  echo "-> Your SDL version is too old - please upgrade to have SDL support"
Line 464  fi Line 1461  fi
 #  echo "WARNING: cannot compile statically with SDL - qemu-fast won't have a graphical output"  #  echo "WARNING: cannot compile statically with SDL - qemu-fast won't have a graphical output"
 #fi  #fi
   
 config_mak="config-host.mak"  config_host_mak="config-host.mak"
 config_h="config-host.h"  config_host_h="config-host.h"
   
 #echo "Creating $config_mak and $config_h"  #echo "Creating $config_host_mak and $config_host_h"
   
 echo "# Automatically generated by configure - do not modify" > $config_mak  test -f $config_host_h && mv $config_host_h ${config_host_h}~
 echo "/* Automatically generated by configure - do not modify */" > $config_h  
   
 echo "prefix=$prefix" >> $config_mak  echo "# Automatically generated by configure - do not modify" > $config_host_mak
 echo "bindir=$bindir" >> $config_mak  printf "# Configured with:" >> $config_host_mak
 echo "mandir=$mandir" >> $config_mak  printf " '%s'" "$0" "$@" >> $config_host_mak
 echo "datadir=$datadir" >> $config_mak  echo >> $config_host_mak
 echo "docdir=$docdir" >> $config_mak  echo "/* Automatically generated by configure - do not modify */" > $config_host_h
 echo "#define CONFIG_QEMU_SHAREDIR \"$datadir\"" >> $config_h  
 echo "MAKE=$make" >> $config_mak  echo "prefix=$prefix" >> $config_host_mak
 echo "CC=$cc" >> $config_mak  echo "bindir=\${prefix}$binsuffix" >> $config_host_mak
 if test "$have_gcc3_options" = "yes" ; then  echo "mandir=\${prefix}$mansuffix" >> $config_host_mak
   echo "HAVE_GCC3_OPTIONS=yes" >> $config_mak  echo "datadir=\${prefix}$datasuffix" >> $config_host_mak
 fi  echo "docdir=\${prefix}$docsuffix" >> $config_host_mak
 echo "HOST_CC=$host_cc" >> $config_mak  echo "#define CONFIG_QEMU_SHAREDIR \"$prefix$datasuffix\"" >> $config_host_h
 echo "AR=$ar" >> $config_mak  echo "MAKE=$make" >> $config_host_mak
 echo "STRIP=$strip -s -R .comment -R .note" >> $config_mak  echo "INSTALL=$install" >> $config_host_mak
 echo "CFLAGS=$CFLAGS" >> $config_mak  echo "INSTALL_DIR=$install -d -m0755 -p" >> $config_host_mak
 echo "LDFLAGS=$LDFLAGS" >> $config_mak  echo "INSTALL_DATA=$install -m0644 -p" >> $config_host_mak
 echo "EXESUF=$EXESUF" >> $config_mak  echo "INSTALL_PROG=$install -m0755 -p" >> $config_host_mak
 if test "$cpu" = "i386" ; then  echo "CC=$cc" >> $config_host_mak
   echo "ARCH=i386" >> $config_mak  echo "HOST_CC=$host_cc" >> $config_host_mak
   echo "#define HOST_I386 1" >> $config_h  echo "AR=$ar" >> $config_host_mak
 elif test "$cpu" = "x86_64" ; then  echo "OBJCOPY=$objcopy" >> $config_host_mak
   echo "ARCH=x86_64" >> $config_mak  echo "LD=$ld" >> $config_host_mak
   echo "#define HOST_X86_64 1" >> $config_h  echo "CFLAGS=$CFLAGS $OS_CFLAGS $ARCH_CFLAGS $EXTRA_CFLAGS" >> $config_host_mak
 elif test "$cpu" = "armv4b" ; then  echo "LDFLAGS=$LDFLAGS $OS_LDFLAGS $ARCH_LDFLAGS $EXTRA_LDFLAGS" >> $config_host_mak
   echo "ARCH=arm" >> $config_mak  echo "EXESUF=$EXESUF" >> $config_host_mak
   echo "#define HOST_ARM 1" >> $config_h  echo "PTHREADLIBS=$PTHREADLIBS" >> $config_host_mak
 elif test "$cpu" = "armv4l" ; then  echo "CLOCKLIBS=$CLOCKLIBS" >> $config_host_mak
   echo "ARCH=arm" >> $config_mak  case "$cpu" in
   echo "#define HOST_ARM 1" >> $config_h    i386|x86_64|alpha|cris|hppa|ia64|m68k|microbaze|mips|mips64|ppc|ppc64|s390|sparc|sparc64)
 elif test "$cpu" = "powerpc" ; then      ARCH=$cpu
   echo "ARCH=ppc" >> $config_mak    ;;
   echo "#define HOST_PPC 1" >> $config_h    armv4b|arm4l)
 elif test "$cpu" = "mips" ; then      ARCH=arm
   echo "ARCH=mips" >> $config_mak    ;;
   echo "#define HOST_MIPS 1" >> $config_h    *)
 elif test "$cpu" = "s390" ; then      echo "Unsupported CPU = $cpu"
   echo "ARCH=s390" >> $config_mak      exit 1
   echo "#define HOST_S390 1" >> $config_h    ;;
 elif test "$cpu" = "alpha" ; then  esac
   echo "ARCH=alpha" >> $config_mak  echo "ARCH=$ARCH" >> $config_host_mak
   echo "#define HOST_ALPHA 1" >> $config_h  arch_name=`echo $ARCH | tr '[:lower:]' '[:upper:]'`
 elif test "$cpu" = "sparc" ; then  echo "#define HOST_$arch_name 1" >> $config_host_h
   echo "ARCH=sparc" >> $config_mak  
   echo "#define HOST_SPARC 1" >> $config_h  if test "$debug_tcg" = "yes" ; then
 elif test "$cpu" = "sparc64" ; then    echo "#define DEBUG_TCG 1" >> $config_host_h
   echo "ARCH=sparc64" >> $config_mak  fi
   echo "#define HOST_SPARC64 1" >> $config_h  if test "$debug" = "yes" ; then
 elif test "$cpu" = "ia64" ; then    echo "#define DEBUG_EXEC 1" >> $config_host_h
   echo "ARCH=ia64" >> $config_mak  fi
   echo "#define HOST_IA64 1" >> $config_h  if test "$sparse" = "yes" ; then
 elif test "$cpu" = "m68k" ; then    echo "CC      := REAL_CC=\"\$(CC)\" cgcc"       >> $config_host_mak
   echo "ARCH=m68k" >> $config_mak    echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc"  >> $config_host_mak
   echo "#define HOST_M68K 1" >> $config_h    echo "CFLAGS  += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
 else  fi
   echo "Unsupported CPU"  if test "$strip_opt" = "yes" ; then
   exit 1    echo "STRIP_OPT=-s" >> $config_host_mak
 fi  fi
 if test "$bigendian" = "yes" ; then  if test "$bigendian" = "yes" ; then
   echo "WORDS_BIGENDIAN=yes" >> $config_mak    echo "WORDS_BIGENDIAN=yes" >> $config_host_mak
   echo "#define WORDS_BIGENDIAN 1" >> $config_h    echo "#define WORDS_BIGENDIAN 1" >> $config_host_h
 fi  fi
 echo "#define HOST_LONG_BITS $hostlongbits" >> $config_h  echo "#define HOST_LONG_BITS $hostlongbits" >> $config_host_h
 if test "$mingw32" = "yes" ; then  if test "$mingw32" = "yes" ; then
   echo "CONFIG_WIN32=yes" >> $config_mak    echo "CONFIG_WIN32=y" >> $config_host_mak
   echo "#define CONFIG_WIN32 1" >> $config_h    echo "#define CONFIG_WIN32 1" >> $config_host_h
 elif test -f "/usr/include/byteswap.h" ; then  else
   echo "#define HAVE_BYTESWAP_H 1" >> $config_h    cat > $TMPC << EOF
   #include <byteswap.h>
   int main(void) { return bswap_32(0); }
   EOF
     if $cc $ARCH_CFLAGS -o $TMPE $TMPC >/dev/null 2> /dev/null ; then
       echo "#define HAVE_BYTESWAP_H 1" >> $config_host_h
     fi
     cat > $TMPC << EOF
   #include <sys/endian.h>
   #include <sys/types.h>
   #include <machine/bswap.h>
   int main(void) { return bswap32(0); }
   EOF
     if $cc $ARCH_CFLAGS -o $TMPE $TMPC >/dev/null 2> /dev/null ; then
       echo "#define HAVE_MACHINE_BSWAP_H 1" >> $config_host_h
     fi
 fi  fi
   
   if [ "$openbsd" = "yes" ] ; then
     echo "#define ENOTSUP 4096" >> $config_host_h
   fi
   
 if test "$darwin" = "yes" ; then  if test "$darwin" = "yes" ; then
   echo "CONFIG_DARWIN=yes" >> $config_mak    echo "CONFIG_DARWIN=y" >> $config_host_mak
   echo "#define CONFIG_DARWIN 1" >> $config_h    echo "#define CONFIG_DARWIN 1" >> $config_host_h
   fi
   
   if test "$aix" = "yes" ; then
     echo "CONFIG_AIX=y" >> $config_host_mak
     echo "#define CONFIG_AIX 1" >> $config_host_h
   fi
   
   if test "$solaris" = "yes" ; then
     echo "CONFIG_SOLARIS=y" >> $config_host_mak
     echo "#define HOST_SOLARIS $solarisrev" >> $config_host_h
     if test "$needs_libsunmath" = "yes" ; then
       echo "NEEDS_LIBSUNMATH=yes" >> $config_host_mak
       echo "#define NEEDS_LIBSUNMATH 1" >> $config_host_h
     fi
 fi  fi
 if test "$gdbstub" = "yes" ; then  if test -n "$sparc_cpu"; then
   echo "CONFIG_GDBSTUB=yes" >> $config_mak    echo "CONFIG__sparc_${sparc_cpu}__=y" >> $config_host_mak
   echo "#define CONFIG_GDBSTUB 1" >> $config_h    echo "#define __sparc_${sparc_cpu}__ 1" >> $config_host_h
 fi  fi
 if test "$gprof" = "yes" ; then  if test "$gprof" = "yes" ; then
   echo "TARGET_GPROF=yes" >> $config_mak    echo "TARGET_GPROF=yes" >> $config_host_mak
   echo "#define HAVE_GPROF 1" >> $config_h    echo "#define HAVE_GPROF 1" >> $config_host_h
 fi  fi
 if test "$static" = "yes" ; then  if test "$static" = "yes" ; then
   echo "CONFIG_STATIC=yes" >> $config_mak    echo "CONFIG_STATIC=y" >> $config_host_mak
   echo "#define CONFIG_STATIC 1" >> $config_h    echo "#define CONFIG_STATIC 1" >> $config_host_h
   fi
   if test $profiler = "yes" ; then
     echo "#define CONFIG_PROFILER 1" >> $config_host_h
 fi  fi
 if test "$slirp" = "yes" ; then  if test "$slirp" = "yes" ; then
   echo "CONFIG_SLIRP=yes" >> $config_mak    echo "CONFIG_SLIRP=y" >> $config_host_mak
   echo "#define CONFIG_SLIRP 1" >> $config_h    echo "#define CONFIG_SLIRP 1" >> $config_host_h
 fi  fi
 if test "$adlib" = "yes" ; then  if test "$vde" = "yes" ; then
   echo "CONFIG_ADLIB=yes" >> $config_mak    echo "CONFIG_VDE=y" >> $config_host_mak
   echo "#define CONFIG_ADLIB 1" >> $config_h    echo "#define CONFIG_VDE 1" >> $config_host_h
 fi    echo "VDE_LIBS=-lvdeplug" >> $config_host_mak
 if test "$oss" = "yes" ; then  fi
   echo "CONFIG_OSS=yes" >> $config_mak  for card in $audio_card_list; do
   echo "#define CONFIG_OSS 1" >> $config_h      def=CONFIG_`echo $card | tr '[:lower:]' '[:upper:]'`
 fi      echo "$def=y" >> $config_host_mak
 if test "$fmod" = "yes" ; then      echo "#define $def 1" >> $config_host_h
   echo "CONFIG_FMOD=yes" >> $config_mak  done
   echo "CONFIG_FMOD_LIB=$fmod_lib" >> $config_mak  echo "#define AUDIO_DRIVERS \\" >> $config_host_h
   echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_mak  for drv in $audio_drv_list; do
   echo "#define CONFIG_FMOD 1" >> $config_h      echo "    &${drv}_audio_driver, \\" >>$config_host_h
 fi      def=CONFIG_`echo $drv | tr '[:lower:]' '[:upper:]'`
 echo -n "VERSION=" >>$config_mak      echo "$def=y" >> $config_host_mak
 head $source_path/VERSION >>$config_mak      if test "$drv" = "fmod"; then
 echo "" >>$config_mak          echo "CONFIG_FMOD_LIB=$fmod_lib" >> $config_host_mak
 echo -n "#define QEMU_VERSION \"" >> $config_h          echo "CONFIG_FMOD_INC=$fmod_inc" >> $config_host_mak
 head $source_path/VERSION >> $config_h      elif test "$drv" = "oss"; then
 echo "\"" >> $config_h          echo "CONFIG_OSS_LIB=$oss_lib" >> $config_host_mak
   
 if test $kqemu = "yes" ; then  
   echo "CONFIG_KQEMU=yes" >> $config_mak  
   if test $linux = "yes" ; then  
     echo "KERNEL_PATH=$kernel_path" >> $config_mak  
     if test $kbuild26 = "yes" ; then  
       echo "CONFIG_KBUILD26=yes" >> $config_mak  
     fi      fi
   done
   echo "" >>$config_host_h
   if test "$mixemu" = "yes" ; then
     echo "CONFIG_MIXEMU=y" >> $config_host_mak
     echo "#define CONFIG_MIXEMU 1" >> $config_host_h
   fi
   if test "$vnc_tls" = "yes" ; then
     echo "CONFIG_VNC_TLS=y" >> $config_host_mak
     echo "CONFIG_VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_host_mak
     echo "CONFIG_VNC_TLS_LIBS=$vnc_tls_libs" >> $config_host_mak
     echo "#define CONFIG_VNC_TLS 1" >> $config_host_h
   fi
   if test "$vnc_sasl" = "yes" ; then
     echo "CONFIG_VNC_SASL=y" >> $config_host_mak
     echo "CONFIG_VNC_SASL_CFLAGS=$vnc_sasl_cflags" >> $config_host_mak
     echo "CONFIG_VNC_SASL_LIBS=$vnc_sasl_libs" >> $config_host_mak
     echo "#define CONFIG_VNC_SASL 1" >> $config_host_h
   fi
   if test "$fnmatch" = "yes" ; then
     echo "#define HAVE_FNMATCH_H 1" >> $config_host_h
   fi
   qemu_version=`head $source_path/VERSION`
   echo "VERSION=$qemu_version" >>$config_host_mak
   echo "#define QEMU_VERSION \"$qemu_version\"" >> $config_host_h
   
   echo "#define QEMU_PKGVERSION \"$pkgversion\"" >> $config_host_h
   
   echo "SRC_PATH=$source_path" >> $config_host_mak
   if [ "$source_path_used" = "yes" ]; then
     echo "VPATH=$source_path" >> $config_host_mak
   fi
   echo "TARGET_DIRS=$target_list" >> $config_host_mak
   if [ "$build_docs" = "yes" ] ; then
     echo "BUILD_DOCS=yes" >> $config_host_mak
   fi
   if test "$static" = "yes"; then
     sdl1=$sdl_static
   else
     sdl1=$sdl
   fi
   if test "$sdl1" = "yes" ; then
     echo "#define CONFIG_SDL 1" >> $config_host_h
     echo "CONFIG_SDL=y" >> $config_host_mak
     if test "$target_softmmu" = "no" -o "$static" = "yes"; then
       echo "SDL_LIBS=$sdl_static_libs" >> $config_host_mak
     elif test "$sdl_x11" = "yes" ; then
       echo "SDL_LIBS=`$sdl_config --libs` -lX11" >> $config_host_mak
     else
       echo "SDL_LIBS=`$sdl_config --libs`" >> $config_host_mak
     fi
     if [ "${aa}" = "yes" ] ; then
       echo "SDL_CFLAGS=`$sdl_config --cflags` `aalib-config --cflags`" >> $config_host_mak
     else
       echo "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_host_mak
   fi    fi
 fi  fi
 echo "SRC_PATH=$source_path" >> $config_mak  if test "$cocoa" = "yes" ; then
 echo "TARGET_DIRS=$target_list" >> $config_mak    echo "#define CONFIG_COCOA 1" >> $config_host_h
     echo "CONFIG_COCOA=y" >> $config_host_mak
   fi
   if test "$curses" = "yes" ; then
     echo "#define CONFIG_CURSES 1" >> $config_host_h
     echo "CONFIG_CURSES=y" >> $config_host_mak
     if test "$ncurses" = "yes" ; then
       echo "CURSES_LIBS=-lncurses" >> $config_host_mak
     else
       echo "CURSES_LIBS=-lcurses" >> $config_host_mak
     fi
   fi
   if test "$atfile" = "yes" ; then
     echo "#define CONFIG_ATFILE 1" >> $config_host_h
   fi
   if test "$utimens" = "yes" ; then
     echo "#define CONFIG_UTIMENSAT 1" >> $config_host_h
   fi
   if test "$pipe2" = "yes" ; then
     echo "#define CONFIG_PIPE2 1" >> $config_host_h
   fi
   if test "$splice" = "yes" ; then
     echo "#define CONFIG_SPLICE 1" >> $config_host_h
   fi
   if test "$inotify" = "yes" ; then
     echo "#define CONFIG_INOTIFY 1" >> $config_host_h
   fi
   if test "$curl" = "yes" ; then
     echo "CONFIG_CURL=y" >> $config_host_mak
     echo "CURL_LIBS=$curl_libs" >> $config_host_mak
     echo "#define CONFIG_CURL 1" >> $config_host_h
   fi
   if test "$brlapi" = "yes" ; then
     echo "CONFIG_BRLAPI=y" >> $config_host_mak
     echo "#define CONFIG_BRLAPI 1" >> $config_host_h
     echo "BRLAPI_LIBS=-lbrlapi" >> $config_host_mak
   fi
   if test "$bluez" = "yes" ; then
     echo "CONFIG_BLUEZ=y" >> $config_host_mak
     echo "CONFIG_BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
     echo "CONFIG_BLUEZ_LIBS=$bluez_libs" >> $config_host_mak
     echo "#define CONFIG_BLUEZ 1" >> $config_host_h
   fi
   if test "$xen" = "yes" ; then
     echo "XEN_LIBS=-lxenstore -lxenctrl -lxenguest" >> $config_host_mak
   fi
   if test "$aio" = "yes" ; then
     echo "#define CONFIG_AIO 1" >> $config_host_h
     echo "CONFIG_AIO=y" >> $config_host_mak
   fi
   if test "$io_thread" = "yes" ; then
     echo "CONFIG_IOTHREAD=y" >> $config_host_mak
     echo "#define CONFIG_IOTHREAD 1" >> $config_host_h
   fi
   if test "$blobs" = "yes" ; then
     echo "INSTALL_BLOBS=yes" >> $config_host_mak
   fi
   if test "$iovec" = "yes" ; then
     echo "#define HAVE_IOVEC 1" >> $config_host_h
   fi
   if test "$preadv" = "yes" ; then
     echo "#define HAVE_PREADV 1" >> $config_host_h
   fi
   if test "$fdt" = "yes" ; then
     echo "#define HAVE_FDT 1" >> $config_host_h
     echo "FDT_LIBS=-lfdt" >> $config_host_mak
   fi
   
 # XXX: suppress that  # XXX: suppress that
 if [ "$bsd" = "yes" ] ; then  if [ "$bsd" = "yes" ] ; then
   echo "#define O_LARGEFILE 0" >> $config_h    echo "#define O_LARGEFILE 0" >> $config_host_h
   echo "#define MAP_ANONYMOUS MAP_ANON" >> $config_h    echo "#define MAP_ANONYMOUS MAP_ANON" >> $config_host_h
   echo "#define _BSD 1" >> $config_h    echo "#define HOST_BSD 1" >> $config_host_h
   fi
   
   echo "#define CONFIG_UNAME_RELEASE \"$uname_release\"" >> $config_host_h
   
   # USB host support
   case "$usb" in
   linux)
     echo "HOST_USB=linux" >> $config_host_mak
   ;;
   bsd)
     echo "HOST_USB=bsd" >> $config_host_mak
   ;;
   *)
     echo "HOST_USB=stub" >> $config_host_mak
   ;;
   esac
   
   # Determine what linker flags to use to force archive inclusion
   check_linker_flags()
   {
       w2=
       if test "$2" ; then
           w2=-Wl,$2
       fi
       $cc $ARCH_CFLAGS -o $TMPE $OS_CFLAGS $TMPC -Wl,$1 ${w2} >/dev/null 2>/dev/null
   }
   
   cat > $TMPC << EOF
   int main(void) { }
   EOF
   if check_linker_flags --whole-archive --no-whole-archive ; then
       # GNU ld
       echo "ARLIBS_BEGIN=-Wl,--whole-archive" >> $config_host_mak
       echo "ARLIBS_END=-Wl,--no-whole-archive" >> $config_host_mak
   elif check_linker_flags -z,allextract -z,defaultextract ; then
       # Solaris ld
       echo "ARLIBS_BEGIN=-Wl,-z,allextract" >> $config_host_mak
       echo "ARLIBS_END=-Wl,-z,defaultextract" >> $config_host_mak
   elif check_linker_flags -all_load ; then
       # Mac OS X
       echo "ARLIBS_BEGIN=-all_load" >> $config_host_mak
       echo "ARLIBS_END=" >> $config_host_mak
   else
       echo "Error: your linker does not support --whole-archive or -z."
       echo "Please report to qemu-devel@nongnu.org"
       exit 1
   fi
   
   if test "$xen" = "yes" ;
       then
       echo "CONFIG_XEN=y" >> $config_host_mak
   fi
   
   tools=
   if test `expr "$target_list" : ".*softmmu.*"` != 0 ; then
     tools="qemu-img\$(EXESUF) $tools"
     if [ "$linux" = "yes" ] ; then
         tools="qemu-nbd\$(EXESUF) qemu-io\$(EXESUF) $tools"
     elif test "$mingw32" = "yes" ; then
         tools="qemu-io\$(EXESUF) $tools"
     fi
 fi  fi
   echo "TOOLS=$tools" >> $config_host_mak
   
 for target in $target_list; do   roms=
   if test \( "$cpu" = "i386" -o "$cpu" = "x86_64" \) -a \
           "$targetos" != "Darwin" ; then
     roms="optionrom"
   fi
   echo "ROMS=$roms" >> $config_host_mak
   
   if test -f ${config_host_h}~ ; then
     if cmp -s $config_host_h ${config_host_h}~ ; then
       mv ${config_host_h}~ $config_host_h
     else
       rm ${config_host_h}~
     fi
   fi
   
   for target in $target_list; do
 target_dir="$target"  target_dir="$target"
 config_mak=$target_dir/config.mak  config_mak=$target_dir/config.mak
 config_h=$target_dir/config.h  config_h=$target_dir/config.h
 target_cpu=`echo $target | cut -d '-' -f 1`  target_arch2=`echo $target | cut -d '-' -f 1`
 target_bigendian="no"  target_bigendian="no"
 [ "$target_cpu" = "armeb" ] && target_bigendian=yes  case "$target_arch2" in
 [ "$target_cpu" = "sparc" ] && target_bigendian=yes    armeb|m68k|microblaze|mips|mipsn32|mips64|ppc|ppcemb|ppc64|ppc64abi32|sh4eb|sparc|sparc64|sparc32plus)
 [ "$target_cpu" = "sparc64" ] && target_bigendian=yes    target_bigendian=yes
 [ "$target_cpu" = "ppc" ] && target_bigendian=yes    ;;
 [ "$target_cpu" = "ppc64" ] && target_bigendian=yes  esac
 [ "$target_cpu" = "mips" ] && target_bigendian=yes  
 target_softmmu="no"  target_softmmu="no"
 if expr $target : '.*-softmmu' > /dev/null ; then  
   target_softmmu="yes"  
 fi  
 target_user_only="no"  target_user_only="no"
 if expr $target : '.*-user' > /dev/null ; then  target_linux_user="no"
   target_user_only="yes"  target_darwin_user="no"
 fi  target_bsd_user="no"
   case "$target" in
 if test "$target_user_only" = "no" -a "$check_gfx" = "yes" \    ${target_arch2}-softmmu)
         -a "$sdl" = "no" -a "$cocoa" = "no" ; then      target_softmmu="yes"
     echo "ERROR: QEMU requires SDL or Cocoa for graphical output"      ;;
     echo "To build QEMU with graphical output configure with --disable-gfx-check"    ${target_arch2}-linux-user)
     echo "Note that this will disable all output from the virtual graphics card."      target_user_only="yes"
     exit 1;      target_linux_user="yes"
 fi      ;;
     ${target_arch2}-darwin-user)
       target_user_only="yes"
       target_darwin_user="yes"
       ;;
     ${target_arch2}-bsd-user)
       target_user_only="yes"
       target_bsd_user="yes"
       ;;
     *)
       echo "ERROR: Target '$target' not recognised"
       exit 1
       ;;
   esac
   
 #echo "Creating $config_mak, $config_h and $target_dir/Makefile"  #echo "Creating $config_mak, $config_h and $target_dir/Makefile"
   
   test -f $config_h && mv $config_h ${config_h}~
   
 mkdir -p $target_dir  mkdir -p $target_dir
 mkdir -p $target_dir/fpu  mkdir -p $target_dir/fpu
 if test "$target" = "arm-user" -o "$target" = "armeb-user" ; then  mkdir -p $target_dir/tcg
   if test "$target" = "arm-linux-user" -o "$target" = "armeb-linux-user" -o "$target" = "arm-bsd-user" -o "$target" = "armeb-bsd-user" ; then
   mkdir -p $target_dir/nwfpe    mkdir -p $target_dir/nwfpe
 fi  fi
 if test "$target_user_only" = "no" ; then  
   mkdir -p $target_dir/slirp  
 fi  
   
 ln -sf $source_path/Makefile.target $target_dir/Makefile  #
   # don't use ln -sf as not all "ln -sf" over write the file/link
   #
   rm -f $target_dir/Makefile
   ln -s $source_path/Makefile.target $target_dir/Makefile
   
 echo "# Automatically generated by configure - do not modify" > $config_mak  
 echo "/* Automatically generated by configure - do not modify */" > $config_h  
   
   echo "# Automatically generated by configure - do not modify" > $config_mak
   
 echo "include ../config-host.mak" >> $config_mak  echo "include ../config-host.mak" >> $config_mak
 echo "#include \"../config-host.h\"" >> $config_h  
   
 interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_cpu/g"`  
 echo "#define CONFIG_QEMU_PREFIX \"$interp_prefix1\"" >> $config_h  
   
 if test "$target_cpu" = "i386" ; then  bflt="no"
   echo "TARGET_ARCH=i386" >> $config_mak  elfload32="no"
   echo "#define TARGET_ARCH \"i386\"" >> $config_h  target_nptl="no"
   echo "#define TARGET_I386 1" >> $config_h  interp_prefix1=`echo "$interp_prefix" | sed "s/%M/$target_arch2/g"`
   if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "i386" ; then  echo "CONFIG_QEMU_PREFIX=\"$interp_prefix1\"" >> $config_mak
     echo "#define USE_KQEMU 1" >> $config_h  gdb_xml_files=""
   fi  
 elif test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then  TARGET_ARCH="$target_arch2"
   echo "TARGET_ARCH=arm" >> $config_mak  TARGET_BASE_ARCH=""
   echo "#define TARGET_ARCH \"arm\"" >> $config_h  TARGET_ABI_DIR=""
   echo "#define TARGET_ARM 1" >> $config_h  
 elif test "$target_cpu" = "sparc" ; then  case "$target_arch2" in
   echo "TARGET_ARCH=sparc" >> $config_mak    i386)
   echo "#define TARGET_ARCH \"sparc\"" >> $config_h      target_phys_bits=32
   echo "#define TARGET_SPARC 1" >> $config_h    ;;
 elif test "$target_cpu" = "sparc64" ; then    x86_64)
   echo "TARGET_ARCH=sparc64" >> $config_mak      TARGET_BASE_ARCH=i386
   echo "#define TARGET_ARCH \"sparc64\"" >> $config_h      target_phys_bits=64
   echo "#define TARGET_SPARC 1" >> $config_h    ;;
   echo "#define TARGET_SPARC64 1" >> $config_h    alpha)
 elif test "$target_cpu" = "ppc" ; then      target_phys_bits=64
   echo "TARGET_ARCH=ppc" >> $config_mak    ;;
   echo "#define TARGET_ARCH \"ppc\"" >> $config_h    arm|armeb)
   echo "#define TARGET_PPC 1" >> $config_h      TARGET_ARCH=arm
 elif test "$target_cpu" = "ppc64" ; then      bflt="yes"
   echo "TARGET_ARCH=ppc64" >> $config_mak      target_nptl="yes"
   echo "#define TARGET_ARCH \"ppc64\"" >> $config_h      gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
   echo "#define TARGET_PPC 1" >> $config_h      target_phys_bits=32
   echo "#define TARGET_PPC64 1" >> $config_h    ;;
 elif test "$target_cpu" = "x86_64" ; then    cris)
   echo "TARGET_ARCH=x86_64" >> $config_mak      target_nptl="yes"
   echo "#define TARGET_ARCH \"x86_64\"" >> $config_h      target_phys_bits=32
   echo "#define TARGET_I386 1" >> $config_h    ;;
   echo "#define TARGET_X86_64 1" >> $config_h    m68k)
   if test $kqemu = "yes" -a "$target_softmmu" = "yes" -a $cpu = "x86_64"  ; then      bflt="yes"
     echo "#define USE_KQEMU 1" >> $config_h      gdb_xml_files="cf-core.xml cf-fp.xml"
   fi      target_phys_bits=32
 elif test "$target_cpu" = "mips" ; then    ;;
   echo "TARGET_ARCH=mips" >> $config_mak    microblaze)
   echo "#define TARGET_ARCH \"mips\"" >> $config_h      bflt="yes"
   echo "#define TARGET_MIPS 1" >> $config_h      target_nptl="yes"
 else      target_phys_bits=32
   echo "Unsupported target CPU"    ;;
   exit 1    mips|mipsel)
 fi      TARGET_ARCH=mips
       echo "TARGET_ABI_MIPSO32=y" >> $config_mak
       target_nptl="yes"
       target_phys_bits=64
     ;;
     mipsn32|mipsn32el)
       TARGET_ARCH=mipsn32
       TARGET_BASE_ARCH=mips
       echo "TARGET_ABI_MIPSN32=y" >> $config_mak
       target_phys_bits=64
     ;;
     mips64|mips64el)
       TARGET_ARCH=mips64
       TARGET_BASE_ARCH=mips
       echo "TARGET_ABI_MIPSN64=y" >> $config_mak
       target_phys_bits=64
     ;;
     ppc)
       gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
       target_phys_bits=32
     ;;
     ppcemb)
       TARGET_BASE_ARCH=ppc
       TARGET_ABI_DIR=ppc
       gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
       target_phys_bits=64
     ;;
     ppc64)
       TARGET_BASE_ARCH=ppc
       TARGET_ABI_DIR=ppc
       gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
       target_phys_bits=64
     ;;
     ppc64abi32)
       TARGET_ARCH=ppc64
       TARGET_BASE_ARCH=ppc
       TARGET_ABI_DIR=ppc
       echo "TARGET_ABI32=y" >> $config_mak
       gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
       target_phys_bits=64
     ;;
     sh4|sh4eb)
       TARGET_ARCH=sh4
       bflt="yes"
       target_nptl="yes"
       target_phys_bits=32
     ;;
     sparc)
       target_phys_bits=64
     ;;
     sparc64)
       TARGET_BASE_ARCH=sparc
       elfload32="yes"
       target_phys_bits=64
     ;;
     sparc32plus)
       TARGET_ARCH=sparc64
       TARGET_BASE_ARCH=sparc
       TARGET_ABI_DIR=sparc
       echo "TARGET_ABI32=y" >> $config_mak
       target_phys_bits=64
     ;;
     *)
       echo "Unsupported target CPU"
       exit 1
     ;;
   esac
   echo "TARGET_ARCH=$TARGET_ARCH" >> $config_mak
   echo "TARGET_ARCH2=$target_arch2" >> $config_mak
   # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
   if [ "$TARGET_BASE_ARCH" = "" ]; then
     TARGET_BASE_ARCH=$TARGET_ARCH
   fi
   echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_mak
   if [ "$TARGET_ABI_DIR" = "" ]; then
     TARGET_ABI_DIR=$TARGET_ARCH
   fi
   echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_mak
   if [ $target_phys_bits -lt $hostlongbits ] ; then
     target_phys_bits=$hostlongbits
   fi
   case "$target_arch2" in
     i386|x86_64)
       if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
         echo "CONFIG_XEN=y" >> $config_mak
       fi
       if test $kqemu = "yes" -a "$target_softmmu" = "yes"
       then
         echo "CONFIG_KQEMU=y" >> $config_mak
       fi
   esac
   case "$target_arch2" in
     i386|x86_64|ppcemb)
       # Make sure the target and host cpus are compatible
       if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
         \( "$target_arch2" = "$cpu" -o \
         \( "$target_arch2" = "ppcemb" -a "$cpu" = "ppc" \) -o \
         \( "$target_arch2" = "x86_64" -a "$cpu" = "i386"   \) -o \
         \( "$target_arch2" = "i386"   -a "$cpu" = "x86_64" \) \) ; then
         echo "CONFIG_KVM=y" >> $config_mak
         echo "KVM_CFLAGS=$kvm_cflags" >> $config_mak
       fi
   esac
   echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
   echo "TARGET_PHYS_ADDR_BITS=$target_phys_bits" >> $config_mak
   echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
 if test "$target_bigendian" = "yes" ; then  if test "$target_bigendian" = "yes" ; then
   echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak    echo "TARGET_WORDS_BIGENDIAN=y" >> $config_mak
   echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h  
 fi  fi
 if test "$target_softmmu" = "yes" ; then  if test "$target_softmmu" = "yes" ; then
   echo "CONFIG_SOFTMMU=yes" >> $config_mak    echo "CONFIG_SOFTMMU=y" >> $config_mak
   echo "#define CONFIG_SOFTMMU 1" >> $config_h  
 fi  fi
 if test "$target_user_only" = "yes" ; then  if test "$target_user_only" = "yes" ; then
   echo "CONFIG_USER_ONLY=yes" >> $config_mak    echo "CONFIG_USER_ONLY=y" >> $config_mak
   echo "#define CONFIG_USER_ONLY 1" >> $config_h  
 fi  fi
   if test "$target_linux_user" = "yes" ; then
 if test "$target_cpu" = "arm" -o "$target_cpu" = "armeb" ; then    echo "CONFIG_LINUX_USER=y" >> $config_mak
   echo "CONFIG_SOFTFLOAT=yes" >> $config_mak  
   echo "#define CONFIG_SOFTFLOAT 1" >> $config_h  
 fi  fi
 # sdl defines  if test "$target_darwin_user" = "yes" ; then
     echo "CONFIG_DARWIN_USER=y" >> $config_mak
 if test "$target_user_only" = "no"; then  
     if test "$target_softmmu" = "no" -o "$static" = "yes"; then  
         sdl1=$sdl_static  
     else  
         sdl1=$sdl  
     fi  
     if test "$sdl1" = "yes" ; then  
         echo "#define CONFIG_SDL 1" >> $config_h  
         echo "CONFIG_SDL=yes" >> $config_mak  
         if test "$target_softmmu" = "no" -o "$static" = "yes"; then  
             echo "SDL_LIBS=$sdl_static_libs" >> $config_mak  
         else  
             echo "SDL_LIBS=`$sdl_config --libs`" >> $config_mak  
         fi  
         echo -n "SDL_CFLAGS=`$sdl_config --cflags`" >> $config_mak  
         if [ "${aa}" = "yes" ] ; then  
             echo -n " `aalib-config --cflags`" >> $config_mak ;  
         fi  
         echo "" >> $config_mak  
     fi  
 fi  fi
   list=""
   if test ! -z "$gdb_xml_files" ; then
     for x in $gdb_xml_files; do
       list="$list $source_path/gdb-xml/$x"
     done
   fi
   echo "TARGET_XML_FILES=$list" >> $config_mak
   
   case "$target_arch2" in
     arm|armeb|m68k|microblaze|mips|mipsel|mipsn32|mipsn32el|mips64|mips64el|ppc|ppc64|ppc64abi32|ppcemb|sparc|sparc64|sparc32plus)
       echo "CONFIG_SOFTFLOAT=y" >> $config_mak
       ;;
   esac
   
 if test "$cocoa" = "yes" ; then  if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
     echo "#define CONFIG_COCOA 1" >> $config_h    echo "TARGET_HAS_BFLT=y" >> $config_mak
     echo "CONFIG_COCOA=yes" >> $config_mak  fi
   if test "$target_user_only" = "yes" \
           -a "$nptl" = "yes" -a "$target_nptl" = "yes"; then
     echo "USE_NPTL=y" >> $config_mak
   fi
   # 32 bit ELF loader in addition to native 64 bit loader?
   if test "$target_user_only" = "yes" -a "$elfload32" = "yes"; then
     echo "TARGET_HAS_ELFLOAD32=y" >> $config_mak
   fi
   if test "$target_bsd_user" = "yes" ; then
     echo "CONFIG_BSD_USER=y" >> $config_mak
 fi  fi
   
   $source_path/create_config < $config_mak > $config_h
   
   test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h
   
 done # for target in $targets  done # for target in $targets
   
 # build tree in object directory if source path is different from current one  # build tree in object directory if source path is different from current one
 if test "$source_path_used" = "yes" ; then  if test "$source_path_used" = "yes" ; then
     DIRS="tests"      DIRS="tests tests/cris slirp audio block pc-bios/optionrom"
     FILES="Makefile tests/Makefile"      FILES="Makefile tests/Makefile"
       FILES="$FILES tests/cris/Makefile tests/cris/.gdbinit"
       FILES="$FILES tests/test-mmap.c"
       FILES="$FILES pc-bios/optionrom/Makefile"
     for dir in $DIRS ; do      for dir in $DIRS ; do
             mkdir -p $dir              mkdir -p $dir
     done      done
       # remove the link and recreate it, as not all "ln -sf" overwrite the link
     for f in $FILES ; do      for f in $FILES ; do
         ln -sf $source_path/$f $f          rm -f $f
           ln -s $source_path/$f $f
     done      done
 fi  fi
   
 rm -f $TMPO $TMPC $TMPE $TMPS  for hwlib in 32 64; do
     d=libhw$hwlib
     mkdir -p $d
     rm -f $d/Makefile
     ln -s $source_path/Makefile.hw $d/Makefile
     echo "HWLIB=libqemuhw$hwlib.a" > $d/config.mak
     echo "CPPFLAGS=-DTARGET_PHYS_ADDR_BITS=$hwlib" >> $d/config.mak
   done
Removed from v.1.1  
changed lines
  Added in v.1.1.1.9

unix.superglobalmegacorp.com