Annotation of qemu/hw/armv7m.c, revision 1.1.1.5

1.1       root        1: /*
                      2:  * ARMV7M System emulation.
                      3:  *
                      4:  * Copyright (c) 2006-2007 CodeSourcery.
                      5:  * Written by Paul Brook
                      6:  *
                      7:  * This code is licenced under the GPL.
                      8:  */
                      9: 
1.1.1.3   root       10: #include "sysbus.h"
1.1       root       11: #include "arm-misc.h"
                     12: #include "sysemu.h"
1.1.1.4   root       13: #include "loader.h"
                     14: #include "elf.h"
1.1       root       15: 
                     16: /* Bitbanded IO.  Each word corresponds to a single bit.  */
                     17: 
                     18: /* Get the byte address of the real memory for a bitband acess.  */
1.1.1.2   root       19: static inline uint32_t bitband_addr(void * opaque, uint32_t addr)
1.1       root       20: {
                     21:     uint32_t res;
                     22: 
1.1.1.2   root       23:     res = *(uint32_t *)opaque;
1.1       root       24:     res |= (addr & 0x1ffffff) >> 5;
                     25:     return res;
                     26: 
                     27: }
                     28: 
                     29: static uint32_t bitband_readb(void *opaque, target_phys_addr_t offset)
                     30: {
                     31:     uint8_t v;
1.1.1.2   root       32:     cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1);
1.1       root       33:     return (v & (1 << ((offset >> 2) & 7))) != 0;
                     34: }
                     35: 
                     36: static void bitband_writeb(void *opaque, target_phys_addr_t offset,
                     37:                            uint32_t value)
                     38: {
                     39:     uint32_t addr;
                     40:     uint8_t mask;
                     41:     uint8_t v;
1.1.1.2   root       42:     addr = bitband_addr(opaque, offset);
1.1       root       43:     mask = (1 << ((offset >> 2) & 7));
                     44:     cpu_physical_memory_read(addr, &v, 1);
                     45:     if (value & 1)
                     46:         v |= mask;
                     47:     else
                     48:         v &= ~mask;
                     49:     cpu_physical_memory_write(addr, &v, 1);
                     50: }
                     51: 
                     52: static uint32_t bitband_readw(void *opaque, target_phys_addr_t offset)
                     53: {
                     54:     uint32_t addr;
                     55:     uint16_t mask;
                     56:     uint16_t v;
1.1.1.2   root       57:     addr = bitband_addr(opaque, offset) & ~1;
1.1       root       58:     mask = (1 << ((offset >> 2) & 15));
                     59:     mask = tswap16(mask);
                     60:     cpu_physical_memory_read(addr, (uint8_t *)&v, 2);
                     61:     return (v & mask) != 0;
                     62: }
                     63: 
                     64: static void bitband_writew(void *opaque, target_phys_addr_t offset,
                     65:                            uint32_t value)
                     66: {
                     67:     uint32_t addr;
                     68:     uint16_t mask;
                     69:     uint16_t v;
1.1.1.2   root       70:     addr = bitband_addr(opaque, offset) & ~1;
1.1       root       71:     mask = (1 << ((offset >> 2) & 15));
                     72:     mask = tswap16(mask);
                     73:     cpu_physical_memory_read(addr, (uint8_t *)&v, 2);
                     74:     if (value & 1)
                     75:         v |= mask;
                     76:     else
                     77:         v &= ~mask;
                     78:     cpu_physical_memory_write(addr, (uint8_t *)&v, 2);
                     79: }
                     80: 
                     81: static uint32_t bitband_readl(void *opaque, target_phys_addr_t offset)
                     82: {
                     83:     uint32_t addr;
                     84:     uint32_t mask;
                     85:     uint32_t v;
1.1.1.2   root       86:     addr = bitband_addr(opaque, offset) & ~3;
1.1       root       87:     mask = (1 << ((offset >> 2) & 31));
                     88:     mask = tswap32(mask);
                     89:     cpu_physical_memory_read(addr, (uint8_t *)&v, 4);
                     90:     return (v & mask) != 0;
                     91: }
                     92: 
                     93: static void bitband_writel(void *opaque, target_phys_addr_t offset,
                     94:                            uint32_t value)
                     95: {
                     96:     uint32_t addr;
                     97:     uint32_t mask;
                     98:     uint32_t v;
1.1.1.2   root       99:     addr = bitband_addr(opaque, offset) & ~3;
1.1       root      100:     mask = (1 << ((offset >> 2) & 31));
                    101:     mask = tswap32(mask);
                    102:     cpu_physical_memory_read(addr, (uint8_t *)&v, 4);
                    103:     if (value & 1)
                    104:         v |= mask;
                    105:     else
                    106:         v &= ~mask;
                    107:     cpu_physical_memory_write(addr, (uint8_t *)&v, 4);
                    108: }
                    109: 
1.1.1.4   root      110: static CPUReadMemoryFunc * const bitband_readfn[] = {
1.1       root      111:    bitband_readb,
                    112:    bitband_readw,
                    113:    bitband_readl
                    114: };
                    115: 
1.1.1.4   root      116: static CPUWriteMemoryFunc * const bitband_writefn[] = {
1.1       root      117:    bitband_writeb,
                    118:    bitband_writew,
                    119:    bitband_writel
                    120: };
                    121: 
1.1.1.3   root      122: typedef struct {
                    123:     SysBusDevice busdev;
                    124:     uint32_t base;
                    125: } BitBandState;
                    126: 
1.1.1.4   root      127: static int bitband_init(SysBusDevice *dev)
1.1       root      128: {
1.1.1.3   root      129:     BitBandState *s = FROM_SYSBUS(BitBandState, dev);
1.1       root      130:     int iomemtype;
                    131: 
1.1.1.3   root      132:     iomemtype = cpu_register_io_memory(bitband_readfn, bitband_writefn,
                    133:                                        &s->base);
                    134:     sysbus_init_mmio(dev, 0x02000000, iomemtype);
1.1.1.4   root      135:     return 0;
1.1.1.3   root      136: }
                    137: 
                    138: static void armv7m_bitband_init(void)
                    139: {
                    140:     DeviceState *dev;
                    141: 
                    142:     dev = qdev_create(NULL, "ARM,bitband-memory");
                    143:     qdev_prop_set_uint32(dev, "base", 0x20000000);
1.1.1.4   root      144:     qdev_init_nofail(dev);
1.1.1.3   root      145:     sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0x22000000);
                    146: 
                    147:     dev = qdev_create(NULL, "ARM,bitband-memory");
                    148:     qdev_prop_set_uint32(dev, "base", 0x40000000);
1.1.1.4   root      149:     qdev_init_nofail(dev);
1.1.1.3   root      150:     sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0x42000000);
1.1       root      151: }
                    152: 
                    153: /* Board init.  */
1.1.1.5 ! root      154: 
        !           155: static void armv7m_reset(void *opaque)
        !           156: {
        !           157:     cpu_reset((CPUState *)opaque);
        !           158: }
        !           159: 
1.1       root      160: /* Init CPU and memory for a v7-M based board.
                    161:    flash_size and sram_size are in kb.
                    162:    Returns the NVIC array.  */
                    163: 
                    164: qemu_irq *armv7m_init(int flash_size, int sram_size,
                    165:                       const char *kernel_filename, const char *cpu_model)
                    166: {
                    167:     CPUState *env;
1.1.1.3   root      168:     DeviceState *nvic;
                    169:     /* FIXME: make this local state.  */
                    170:     static qemu_irq pic[64];
                    171:     qemu_irq *cpu_pic;
1.1       root      172:     int image_size;
                    173:     uint64_t entry;
                    174:     uint64_t lowaddr;
1.1.1.3   root      175:     int i;
1.1.1.4   root      176:     int big_endian;
1.1       root      177: 
                    178:     flash_size *= 1024;
                    179:     sram_size *= 1024;
                    180: 
                    181:     if (!cpu_model)
                    182:        cpu_model = "cortex-m3";
                    183:     env = cpu_init(cpu_model);
                    184:     if (!env) {
                    185:         fprintf(stderr, "Unable to find CPU definition\n");
                    186:         exit(1);
                    187:     }
                    188: 
                    189: #if 0
                    190:     /* > 32Mb SRAM gets complicated because it overlaps the bitband area.
                    191:        We don't have proper commandline options, so allocate half of memory
                    192:        as SRAM, up to a maximum of 32Mb, and the rest as code.  */
                    193:     if (ram_size > (512 + 32) * 1024 * 1024)
                    194:         ram_size = (512 + 32) * 1024 * 1024;
                    195:     sram_size = (ram_size / 2) & TARGET_PAGE_MASK;
                    196:     if (sram_size > 32 * 1024 * 1024)
                    197:         sram_size = 32 * 1024 * 1024;
                    198:     code_size = ram_size - sram_size;
                    199: #endif
                    200: 
                    201:     /* Flash programming is done via the SCU, so pretend it is ROM.  */
1.1.1.3   root      202:     cpu_register_physical_memory(0, flash_size,
1.1.1.5 ! root      203:                                  qemu_ram_alloc(NULL, "armv7m.flash",
        !           204:                                                 flash_size) | IO_MEM_ROM);
1.1       root      205:     cpu_register_physical_memory(0x20000000, sram_size,
1.1.1.5 ! root      206:                                  qemu_ram_alloc(NULL, "armv7m.sram",
        !           207:                                                 sram_size) | IO_MEM_RAM);
1.1       root      208:     armv7m_bitband_init();
                    209: 
1.1.1.3   root      210:     nvic = qdev_create(NULL, "armv7m_nvic");
1.1.1.5 ! root      211:     env->nvic = nvic;
1.1.1.4   root      212:     qdev_init_nofail(nvic);
1.1.1.3   root      213:     cpu_pic = arm_pic_init_cpu(env);
                    214:     sysbus_connect_irq(sysbus_from_qdev(nvic), 0, cpu_pic[ARM_PIC_CPU_IRQ]);
                    215:     for (i = 0; i < 64; i++) {
                    216:         pic[i] = qdev_get_gpio_in(nvic, i);
                    217:     }
1.1       root      218: 
1.1.1.4   root      219: #ifdef TARGET_WORDS_BIGENDIAN
                    220:     big_endian = 1;
                    221: #else
                    222:     big_endian = 0;
                    223: #endif
                    224: 
1.1.1.5 ! root      225:     image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr,
        !           226:                           NULL, big_endian, ELF_MACHINE, 1);
1.1       root      227:     if (image_size < 0) {
1.1.1.3   root      228:         image_size = load_image_targphys(kernel_filename, 0, flash_size);
1.1       root      229:        lowaddr = 0;
                    230:     }
                    231:     if (image_size < 0) {
                    232:         fprintf(stderr, "qemu: could not load kernel '%s'\n",
                    233:                 kernel_filename);
                    234:         exit(1);
                    235:     }
                    236: 
                    237:     /* Hack to map an additional page of ram at the top of the address
                    238:        space.  This stops qemu complaining about executing code outside RAM
                    239:        when returning from an exception.  */
1.1.1.3   root      240:     cpu_register_physical_memory(0xfffff000, 0x1000,
1.1.1.5 ! root      241:                                  qemu_ram_alloc(NULL, "armv7m.hack", 
        !           242:                                                 0x1000) | IO_MEM_RAM);
1.1       root      243: 
1.1.1.5 ! root      244:     qemu_register_reset(armv7m_reset, env);
1.1       root      245:     return pic;
                    246: }
1.1.1.3   root      247: 
                    248: static SysBusDeviceInfo bitband_info = {
                    249:     .init = bitband_init,
                    250:     .qdev.name  = "ARM,bitband-memory",
                    251:     .qdev.size  = sizeof(BitBandState),
                    252:     .qdev.props = (Property[]) {
1.1.1.4   root      253:         DEFINE_PROP_UINT32("base", BitBandState, base, 0),
                    254:         DEFINE_PROP_END_OF_LIST(),
1.1.1.3   root      255:     }
                    256: };
                    257: 
                    258: static void armv7m_register_devices(void)
                    259: {
                    260:     sysbus_register_withprop(&bitband_info);
                    261: }
                    262: 
                    263: device_init(armv7m_register_devices)

unix.superglobalmegacorp.com