![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to grlib_gptimer.c CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Qemu by Fabrice Bellard] / qemu / hw|
Return to grlib_gptimer.c CVS log | Up to [Qemu by Fabrice Bellard] / qemu / hw |
1.1 root 1: /*
2: * QEMU GRLIB GPTimer Emulator
3: *
4: * Copyright (c) 2010-2011 AdaCore
5: *
6: * Permission is hereby granted, free of charge, to any person obtaining a copy
7: * of this software and associated documentation files (the "Software"), to deal
8: * in the Software without restriction, including without limitation the rights
9: * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10: * copies of the Software, and to permit persons to whom the Software is
11: * furnished to do so, subject to the following conditions:
12: *
13: * The above copyright notice and this permission notice shall be included in
14: * all copies or substantial portions of the Software.
15: *
16: * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17: * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18: * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19: * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20: * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21: * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22: * THE SOFTWARE.
23: */
24:
25: #include "sysbus.h"
26: #include "qemu-timer.h"
27:
28: #include "trace.h"
29:
30: #define UNIT_REG_SIZE 16 /* Size of memory mapped regs for the unit */
31: #define GPTIMER_REG_SIZE 16 /* Size of memory mapped regs for a GPTimer */
32:
33: #define GPTIMER_MAX_TIMERS 8
34:
35: /* GPTimer Config register fields */
36: #define GPTIMER_ENABLE (1 << 0)
37: #define GPTIMER_RESTART (1 << 1)
38: #define GPTIMER_LOAD (1 << 2)
39: #define GPTIMER_INT_ENABLE (1 << 3)
40: #define GPTIMER_INT_PENDING (1 << 4)
41: #define GPTIMER_CHAIN (1 << 5) /* Not supported */
42: #define GPTIMER_DEBUG_HALT (1 << 6) /* Not supported */
43:
44: /* Memory mapped register offsets */
45: #define SCALER_OFFSET 0x00
46: #define SCALER_RELOAD_OFFSET 0x04
47: #define CONFIG_OFFSET 0x08
48: #define COUNTER_OFFSET 0x00
49: #define COUNTER_RELOAD_OFFSET 0x04
50: #define TIMER_BASE 0x10
51:
52: typedef struct GPTimer GPTimer;
53: typedef struct GPTimerUnit GPTimerUnit;
54:
55: struct GPTimer {
56: QEMUBH *bh;
57: struct ptimer_state *ptimer;
58:
59: qemu_irq irq;
60: int id;
61: GPTimerUnit *unit;
62:
63: /* registers */
64: uint32_t counter;
65: uint32_t reload;
66: uint32_t config;
67: };
68:
69: struct GPTimerUnit {
70: SysBusDevice busdev;
71:
72: uint32_t nr_timers; /* Number of timers available */
73: uint32_t freq_hz; /* System frequency */
74: uint32_t irq_line; /* Base irq line */
75:
76: GPTimer *timers;
77:
78: /* registers */
79: uint32_t scaler;
80: uint32_t reload;
81: uint32_t config;
82: };
83:
84: static void grlib_gptimer_enable(GPTimer *timer)
85: {
86: assert(timer != NULL);
87:
88:
89: ptimer_stop(timer->ptimer);
90:
91: if (!(timer->config & GPTIMER_ENABLE)) {
92: /* Timer disabled */
93: trace_grlib_gptimer_disabled(timer->id, timer->config);
94: return;
95: }
96:
97: /* ptimer is triggered when the counter reach 0 but GPTimer is triggered at
98: underflow. Set count + 1 to simulate the GPTimer behavior. */
99:
100: trace_grlib_gptimer_enable(timer->id, timer->counter + 1);
101:
102: ptimer_set_count(timer->ptimer, timer->counter + 1);
103: ptimer_run(timer->ptimer, 1);
104: }
105:
106: static void grlib_gptimer_restart(GPTimer *timer)
107: {
108: assert(timer != NULL);
109:
110: trace_grlib_gptimer_restart(timer->id, timer->reload);
111:
112: timer->counter = timer->reload;
113: grlib_gptimer_enable(timer);
114: }
115:
116: static void grlib_gptimer_set_scaler(GPTimerUnit *unit, uint32_t scaler)
117: {
118: int i = 0;
119: uint32_t value = 0;
120:
121: assert(unit != NULL);
122:
123: if (scaler > 0) {
124: value = unit->freq_hz / (scaler + 1);
125: } else {
126: value = unit->freq_hz;
127: }
128:
129: trace_grlib_gptimer_set_scaler(scaler, value);
130:
131: for (i = 0; i < unit->nr_timers; i++) {
132: ptimer_set_freq(unit->timers[i].ptimer, value);
133: }
134: }
135:
136: static void grlib_gptimer_hit(void *opaque)
137: {
138: GPTimer *timer = opaque;
139: assert(timer != NULL);
140:
141: trace_grlib_gptimer_hit(timer->id);
142:
143: /* Timer expired */
144:
145: if (timer->config & GPTIMER_INT_ENABLE) {
146: /* Set the pending bit (only unset by write in the config register) */
147: timer->config |= GPTIMER_INT_PENDING;
148: qemu_irq_pulse(timer->irq);
149: }
150:
151: if (timer->config & GPTIMER_RESTART) {
152: grlib_gptimer_restart(timer);
153: }
154: }
155:
156: static uint32_t grlib_gptimer_readl(void *opaque, target_phys_addr_t addr)
157: {
158: GPTimerUnit *unit = opaque;
159: target_phys_addr_t timer_addr;
160: int id;
161: uint32_t value = 0;
162:
163: addr &= 0xff;
164:
165: /* Unit registers */
166: switch (addr) {
167: case SCALER_OFFSET:
1.1.1.2 root 168: trace_grlib_gptimer_readl(-1, addr, unit->scaler);
1.1 root 169: return unit->scaler;
170:
171: case SCALER_RELOAD_OFFSET:
1.1.1.2 root 172: trace_grlib_gptimer_readl(-1, addr, unit->reload);
1.1 root 173: return unit->reload;
174:
175: case CONFIG_OFFSET:
1.1.1.2 root 176: trace_grlib_gptimer_readl(-1, addr, unit->config);
1.1 root 177: return unit->config;
178:
179: default:
180: break;
181: }
182:
183: timer_addr = (addr % TIMER_BASE);
184: id = (addr - TIMER_BASE) / TIMER_BASE;
185:
186: if (id >= 0 && id < unit->nr_timers) {
187:
188: /* GPTimer registers */
189: switch (timer_addr) {
190: case COUNTER_OFFSET:
191: value = ptimer_get_count(unit->timers[id].ptimer);
1.1.1.2 root 192: trace_grlib_gptimer_readl(id, addr, value);
1.1 root 193: return value;
194:
195: case COUNTER_RELOAD_OFFSET:
196: value = unit->timers[id].reload;
1.1.1.2 root 197: trace_grlib_gptimer_readl(id, addr, value);
1.1 root 198: return value;
199:
200: case CONFIG_OFFSET:
1.1.1.2 root 201: trace_grlib_gptimer_readl(id, addr, unit->timers[id].config);
1.1 root 202: return unit->timers[id].config;
203:
204: default:
205: break;
206: }
207:
208: }
209:
1.1.1.2 root 210: trace_grlib_gptimer_readl(-1, addr, 0);
1.1 root 211: return 0;
212: }
213:
214: static void
215: grlib_gptimer_writel(void *opaque, target_phys_addr_t addr, uint32_t value)
216: {
217: GPTimerUnit *unit = opaque;
218: target_phys_addr_t timer_addr;
219: int id;
220:
221: addr &= 0xff;
222:
223: /* Unit registers */
224: switch (addr) {
225: case SCALER_OFFSET:
226: value &= 0xFFFF; /* clean up the value */
227: unit->scaler = value;
1.1.1.2 root 228: trace_grlib_gptimer_writel(-1, addr, unit->scaler);
1.1 root 229: return;
230:
231: case SCALER_RELOAD_OFFSET:
232: value &= 0xFFFF; /* clean up the value */
233: unit->reload = value;
1.1.1.2 root 234: trace_grlib_gptimer_writel(-1, addr, unit->reload);
1.1 root 235: grlib_gptimer_set_scaler(unit, value);
236: return;
237:
238: case CONFIG_OFFSET:
239: /* Read Only (disable timer freeze not supported) */
1.1.1.2 root 240: trace_grlib_gptimer_writel(-1, addr, 0);
1.1 root 241: return;
242:
243: default:
244: break;
245: }
246:
247: timer_addr = (addr % TIMER_BASE);
248: id = (addr - TIMER_BASE) / TIMER_BASE;
249:
250: if (id >= 0 && id < unit->nr_timers) {
251:
252: /* GPTimer registers */
253: switch (timer_addr) {
254: case COUNTER_OFFSET:
1.1.1.2 root 255: trace_grlib_gptimer_writel(id, addr, value);
1.1 root 256: unit->timers[id].counter = value;
257: grlib_gptimer_enable(&unit->timers[id]);
258: return;
259:
260: case COUNTER_RELOAD_OFFSET:
1.1.1.2 root 261: trace_grlib_gptimer_writel(id, addr, value);
1.1 root 262: unit->timers[id].reload = value;
263: return;
264:
265: case CONFIG_OFFSET:
1.1.1.2 root 266: trace_grlib_gptimer_writel(id, addr, value);
1.1 root 267:
268: if (value & GPTIMER_INT_PENDING) {
269: /* clear pending bit */
270: value &= ~GPTIMER_INT_PENDING;
271: } else {
272: /* keep pending bit */
273: value |= unit->timers[id].config & GPTIMER_INT_PENDING;
274: }
275:
276: unit->timers[id].config = value;
277:
278: /* gptimer_restart calls gptimer_enable, so if "enable" and "load"
279: bits are present, we just have to call restart. */
280:
281: if (value & GPTIMER_LOAD) {
282: grlib_gptimer_restart(&unit->timers[id]);
283: } else if (value & GPTIMER_ENABLE) {
284: grlib_gptimer_enable(&unit->timers[id]);
285: }
286:
287: /* These fields must always be read as 0 */
288: value &= ~(GPTIMER_LOAD & GPTIMER_DEBUG_HALT);
289:
290: unit->timers[id].config = value;
291: return;
292:
293: default:
294: break;
295: }
296:
297: }
298:
1.1.1.2 root 299: trace_grlib_gptimer_writel(-1, addr, value);
1.1 root 300: }
301:
302: static CPUReadMemoryFunc * const grlib_gptimer_read[] = {
303: NULL, NULL, grlib_gptimer_readl,
304: };
305:
306: static CPUWriteMemoryFunc * const grlib_gptimer_write[] = {
307: NULL, NULL, grlib_gptimer_writel,
308: };
309:
310: static void grlib_gptimer_reset(DeviceState *d)
311: {
312: GPTimerUnit *unit = container_of(d, GPTimerUnit, busdev.qdev);
313: int i = 0;
314:
315: assert(unit != NULL);
316:
317: unit->scaler = 0;
318: unit->reload = 0;
319: unit->config = 0;
320:
321: unit->config = unit->nr_timers;
322: unit->config |= unit->irq_line << 3;
323: unit->config |= 1 << 8; /* separate interrupt */
324: unit->config |= 1 << 9; /* Disable timer freeze */
325:
326:
327: for (i = 0; i < unit->nr_timers; i++) {
328: GPTimer *timer = &unit->timers[i];
329:
330: timer->counter = 0;
331: timer->reload = 0;
332: timer->config = 0;
333: ptimer_stop(timer->ptimer);
334: ptimer_set_count(timer->ptimer, 0);
335: ptimer_set_freq(timer->ptimer, unit->freq_hz);
336: }
337: }
338:
339: static int grlib_gptimer_init(SysBusDevice *dev)
340: {
341: GPTimerUnit *unit = FROM_SYSBUS(typeof(*unit), dev);
342: unsigned int i;
343: int timer_regs;
344:
345: assert(unit->nr_timers > 0);
346: assert(unit->nr_timers <= GPTIMER_MAX_TIMERS);
347:
1.1.1.3 ! root 348: unit->timers = g_malloc0(sizeof unit->timers[0] * unit->nr_timers);
1.1 root 349:
350: for (i = 0; i < unit->nr_timers; i++) {
351: GPTimer *timer = &unit->timers[i];
352:
353: timer->unit = unit;
354: timer->bh = qemu_bh_new(grlib_gptimer_hit, timer);
355: timer->ptimer = ptimer_init(timer->bh);
356: timer->id = i;
357:
358: /* One IRQ line for each timer */
359: sysbus_init_irq(dev, &timer->irq);
360:
361: ptimer_set_freq(timer->ptimer, unit->freq_hz);
362: }
363:
364: timer_regs = cpu_register_io_memory(grlib_gptimer_read,
365: grlib_gptimer_write,
366: unit, DEVICE_NATIVE_ENDIAN);
367: if (timer_regs < 0) {
368: return -1;
369: }
370:
371: sysbus_init_mmio(dev, UNIT_REG_SIZE + GPTIMER_REG_SIZE * unit->nr_timers,
372: timer_regs);
373: return 0;
374: }
375:
376: static SysBusDeviceInfo grlib_gptimer_info = {
377: .init = grlib_gptimer_init,
378: .qdev.name = "grlib,gptimer",
379: .qdev.reset = grlib_gptimer_reset,
380: .qdev.size = sizeof(GPTimerUnit),
381: .qdev.props = (Property[]) {
382: DEFINE_PROP_UINT32("frequency", GPTimerUnit, freq_hz, 40000000),
383: DEFINE_PROP_UINT32("irq-line", GPTimerUnit, irq_line, 8),
384: DEFINE_PROP_UINT32("nr-timers", GPTimerUnit, nr_timers, 2),
385: DEFINE_PROP_END_OF_LIST()
386: }
387: };
388:
389: static void grlib_gptimer_register(void)
390: {
391: sysbus_register_withprop(&grlib_gptimer_info);
392: }
393:
394: device_init(grlib_gptimer_register)
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.