![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to internal.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Qemu by Fabrice Bellard] / qemu / hw / ide|
Return to internal.h CVS log | Up to [Qemu by Fabrice Bellard] / qemu / hw / ide |
1.1 root 1: #ifndef HW_IDE_INTERNAL_H
2: #define HW_IDE_INTERNAL_H
3:
4: /*
5: * QEMU IDE Emulation -- internal header file
6: * only files in hw/ide/ are supposed to include this file.
7: * non-internal declarations are in hw/ide.h
8: */
9: #include <hw/ide.h>
1.1.1.4 root 10: #include "block_int.h"
1.1.1.5 ! root 11: #include "iorange.h"
1.1 root 12:
13: /* debug IDE devices */
14: //#define DEBUG_IDE
15: //#define DEBUG_IDE_ATAPI
16: //#define DEBUG_AIO
17: #define USE_DMA_CDROM
18:
19: typedef struct IDEBus IDEBus;
20: typedef struct IDEDevice IDEDevice;
21: typedef struct IDEDeviceInfo IDEDeviceInfo;
22: typedef struct IDEState IDEState;
1.1.1.5 ! root 23: typedef struct IDEDMA IDEDMA;
! 24: typedef struct IDEDMAOps IDEDMAOps;
1.1 root 25:
26: /* Bits of HD_STATUS */
27: #define ERR_STAT 0x01
28: #define INDEX_STAT 0x02
29: #define ECC_STAT 0x04 /* Corrected error */
30: #define DRQ_STAT 0x08
31: #define SEEK_STAT 0x10
32: #define SRV_STAT 0x10
33: #define WRERR_STAT 0x20
34: #define READY_STAT 0x40
35: #define BUSY_STAT 0x80
36:
37: /* Bits for HD_ERROR */
38: #define MARK_ERR 0x01 /* Bad address mark */
39: #define TRK0_ERR 0x02 /* couldn't find track 0 */
40: #define ABRT_ERR 0x04 /* Command aborted */
41: #define MCR_ERR 0x08 /* media change request */
42: #define ID_ERR 0x10 /* ID field not found */
43: #define MC_ERR 0x20 /* media changed */
44: #define ECC_ERR 0x40 /* Uncorrectable ECC error */
45: #define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
46: #define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
47:
48: /* Bits of HD_NSECTOR */
49: #define CD 0x01
50: #define IO 0x02
51: #define REL 0x04
52: #define TAG_MASK 0xf8
53:
54: #define IDE_CMD_RESET 0x04
55: #define IDE_CMD_DISABLE_IRQ 0x02
56:
57: /* ATA/ATAPI Commands pre T13 Spec */
58: #define WIN_NOP 0x00
59: /*
60: * 0x01->0x02 Reserved
61: */
62: #define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
63: /*
64: * 0x04->0x07 Reserved
65: */
66: #define WIN_SRST 0x08 /* ATAPI soft reset command */
67: #define WIN_DEVICE_RESET 0x08
68: /*
69: * 0x09->0x0F Reserved
70: */
71: #define WIN_RECAL 0x10
72: #define WIN_RESTORE WIN_RECAL
73: /*
74: * 0x10->0x1F Reserved
75: */
76: #define WIN_READ 0x20 /* 28-Bit */
77: #define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
78: #define WIN_READ_LONG 0x22 /* 28-Bit */
79: #define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
80: #define WIN_READ_EXT 0x24 /* 48-Bit */
81: #define WIN_READDMA_EXT 0x25 /* 48-Bit */
82: #define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
83: #define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
84: /*
85: * 0x28
86: */
87: #define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
88: /*
89: * 0x2A->0x2F Reserved
90: */
91: #define WIN_WRITE 0x30 /* 28-Bit */
92: #define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
93: #define WIN_WRITE_LONG 0x32 /* 28-Bit */
94: #define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
95: #define WIN_WRITE_EXT 0x34 /* 48-Bit */
96: #define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
97: #define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
98: #define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
99: #define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
100: #define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
101: /*
102: * 0x3A->0x3B Reserved
103: */
104: #define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
105: /*
106: * 0x3D->0x3F Reserved
107: */
108: #define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
109: #define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
110: #define WIN_VERIFY_EXT 0x42 /* 48-Bit */
111: /*
112: * 0x43->0x4F Reserved
113: */
114: #define WIN_FORMAT 0x50
115: /*
116: * 0x51->0x5F Reserved
117: */
118: #define WIN_INIT 0x60
119: /*
120: * 0x61->0x5F Reserved
121: */
122: #define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
123: #define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
124: #define WIN_DIAGNOSE 0x90
125: #define WIN_SPECIFY 0x91 /* set drive geometry translation */
126: #define WIN_DOWNLOAD_MICROCODE 0x92
127: #define WIN_STANDBYNOW2 0x94
128: #define CFA_IDLEIMMEDIATE 0x95 /* force drive to become "ready" */
129: #define WIN_STANDBY2 0x96
130: #define WIN_SETIDLE2 0x97
131: #define WIN_CHECKPOWERMODE2 0x98
132: #define WIN_SLEEPNOW2 0x99
133: /*
134: * 0x9A VENDOR
135: */
136: #define WIN_PACKETCMD 0xA0 /* Send a packet command. */
137: #define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
138: #define WIN_QUEUED_SERVICE 0xA2
139: #define WIN_SMART 0xB0 /* self-monitoring and reporting */
140: #define CFA_ACCESS_METADATA_STORAGE 0xB8
141: #define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
142: #define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
143: #define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
144: #define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
145: #define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
146: #define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
147: #define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
148: #define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
149: #define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
150: #define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
151: #define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
152: #define WIN_GETMEDIASTATUS 0xDA
153: #define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
154: #define WIN_POSTBOOT 0xDC
155: #define WIN_PREBOOT 0xDD
156: #define WIN_DOORLOCK 0xDE /* lock door on removable drives */
157: #define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
158: #define WIN_STANDBYNOW1 0xE0
159: #define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
160: #define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
161: #define WIN_SETIDLE1 0xE3
162: #define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
163: #define WIN_CHECKPOWERMODE1 0xE5
164: #define WIN_SLEEPNOW1 0xE6
165: #define WIN_FLUSH_CACHE 0xE7
166: #define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
167: #define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
168: /* SET_FEATURES 0x22 or 0xDD */
169: #define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
170: #define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
171: #define WIN_MEDIAEJECT 0xED
172: #define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
173: #define WIN_SETFEATURES 0xEF /* set special drive features */
174: #define EXABYTE_ENABLE_NEST 0xF0
175: #define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature */
176: #define WIN_SECURITY_SET_PASS 0xF1
177: #define WIN_SECURITY_UNLOCK 0xF2
178: #define WIN_SECURITY_ERASE_PREPARE 0xF3
179: #define WIN_SECURITY_ERASE_UNIT 0xF4
180: #define WIN_SECURITY_FREEZE_LOCK 0xF5
181: #define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP */
182: #define WIN_SECURITY_DISABLE 0xF6
183: #define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
184: #define WIN_SET_MAX 0xF9
185: #define DISABLE_SEAGATE 0xFB
186:
187: /* set to 1 set disable mult support */
188: #define MAX_MULT_SECTORS 16
189:
190: #define IDE_DMA_BUF_SECTORS 256
191:
192: #if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
193: #error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
194: #endif
195:
196: /* ATAPI defines */
197:
198: #define ATAPI_PACKET_SIZE 12
199:
200: /* The generic packet command opcodes for CD/DVD Logical Units,
201: * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
202: #define GPCMD_BLANK 0xa1
203: #define GPCMD_CLOSE_TRACK 0x5b
204: #define GPCMD_FLUSH_CACHE 0x35
205: #define GPCMD_FORMAT_UNIT 0x04
206: #define GPCMD_GET_CONFIGURATION 0x46
207: #define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
208: #define GPCMD_GET_PERFORMANCE 0xac
209: #define GPCMD_INQUIRY 0x12
210: #define GPCMD_LOAD_UNLOAD 0xa6
211: #define GPCMD_MECHANISM_STATUS 0xbd
212: #define GPCMD_MODE_SELECT_10 0x55
213: #define GPCMD_MODE_SENSE_10 0x5a
214: #define GPCMD_PAUSE_RESUME 0x4b
215: #define GPCMD_PLAY_AUDIO_10 0x45
216: #define GPCMD_PLAY_AUDIO_MSF 0x47
217: #define GPCMD_PLAY_AUDIO_TI 0x48
218: #define GPCMD_PLAY_CD 0xbc
219: #define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
220: #define GPCMD_READ_10 0x28
221: #define GPCMD_READ_12 0xa8
222: #define GPCMD_READ_CDVD_CAPACITY 0x25
223: #define GPCMD_READ_CD 0xbe
224: #define GPCMD_READ_CD_MSF 0xb9
225: #define GPCMD_READ_DISC_INFO 0x51
226: #define GPCMD_READ_DVD_STRUCTURE 0xad
227: #define GPCMD_READ_FORMAT_CAPACITIES 0x23
228: #define GPCMD_READ_HEADER 0x44
229: #define GPCMD_READ_TRACK_RZONE_INFO 0x52
230: #define GPCMD_READ_SUBCHANNEL 0x42
231: #define GPCMD_READ_TOC_PMA_ATIP 0x43
232: #define GPCMD_REPAIR_RZONE_TRACK 0x58
233: #define GPCMD_REPORT_KEY 0xa4
234: #define GPCMD_REQUEST_SENSE 0x03
235: #define GPCMD_RESERVE_RZONE_TRACK 0x53
236: #define GPCMD_SCAN 0xba
237: #define GPCMD_SEEK 0x2b
238: #define GPCMD_SEND_DVD_STRUCTURE 0xad
239: #define GPCMD_SEND_EVENT 0xa2
240: #define GPCMD_SEND_KEY 0xa3
241: #define GPCMD_SEND_OPC 0x54
242: #define GPCMD_SET_READ_AHEAD 0xa7
243: #define GPCMD_SET_STREAMING 0xb6
244: #define GPCMD_START_STOP_UNIT 0x1b
245: #define GPCMD_STOP_PLAY_SCAN 0x4e
246: #define GPCMD_TEST_UNIT_READY 0x00
247: #define GPCMD_VERIFY_10 0x2f
248: #define GPCMD_WRITE_10 0x2a
249: #define GPCMD_WRITE_AND_VERIFY_10 0x2e
250: /* This is listed as optional in ATAPI 2.6, but is (curiously)
251: * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
252: * Table 377 as an MMC command for SCSi devices though... Most ATAPI
253: * drives support it. */
254: #define GPCMD_SET_SPEED 0xbb
255: /* This seems to be a SCSI specific CD-ROM opcode
256: * to play data at track/index */
257: #define GPCMD_PLAYAUDIO_TI 0x48
258: /*
259: * From MS Media Status Notification Support Specification. For
260: * older drives only.
261: */
262: #define GPCMD_GET_MEDIA_STATUS 0xda
263: #define GPCMD_MODE_SENSE_6 0x1a
264:
265: /* Mode page codes for mode sense/set */
266: #define GPMODE_R_W_ERROR_PAGE 0x01
267: #define GPMODE_WRITE_PARMS_PAGE 0x05
268: #define GPMODE_AUDIO_CTL_PAGE 0x0e
269: #define GPMODE_POWER_PAGE 0x1a
270: #define GPMODE_FAULT_FAIL_PAGE 0x1c
271: #define GPMODE_TO_PROTECT_PAGE 0x1d
272: #define GPMODE_CAPABILITIES_PAGE 0x2a
273: #define GPMODE_ALL_PAGES 0x3f
274: /* Not in Mt. Fuji, but in ATAPI 2.6 -- depricated now in favor
275: * of MODE_SENSE_POWER_PAGE */
276: #define GPMODE_CDROM_PAGE 0x0d
277:
278: /*
279: * Based on values from <linux/cdrom.h> but extending CD_MINS
280: * to the maximum common size allowed by the Orange's Book ATIP
281: *
282: * 90 and 99 min CDs are also available but using them as the
283: * upper limit reduces the effectiveness of the heuristic to
284: * detect DVDs burned to less than 25% of their maximum capacity
285: */
286:
287: /* Some generally useful CD-ROM information */
288: #define CD_MINS 80 /* max. minutes per CD */
289: #define CD_SECS 60 /* seconds per minute */
290: #define CD_FRAMES 75 /* frames per second */
291: #define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
292: #define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
293: #define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
294:
295: /*
296: * The MMC values are not IDE specific and might need to be moved
297: * to a common header if they are also needed for the SCSI emulation
298: */
299:
300: /* Profile list from MMC-6 revision 1 table 91 */
301: #define MMC_PROFILE_NONE 0x0000
302: #define MMC_PROFILE_CD_ROM 0x0008
303: #define MMC_PROFILE_CD_R 0x0009
304: #define MMC_PROFILE_CD_RW 0x000A
305: #define MMC_PROFILE_DVD_ROM 0x0010
306: #define MMC_PROFILE_DVD_R_SR 0x0011
307: #define MMC_PROFILE_DVD_RAM 0x0012
308: #define MMC_PROFILE_DVD_RW_RO 0x0013
309: #define MMC_PROFILE_DVD_RW_SR 0x0014
310: #define MMC_PROFILE_DVD_R_DL_SR 0x0015
311: #define MMC_PROFILE_DVD_R_DL_JR 0x0016
312: #define MMC_PROFILE_DVD_RW_DL 0x0017
313: #define MMC_PROFILE_DVD_DDR 0x0018
314: #define MMC_PROFILE_DVD_PLUS_RW 0x001A
315: #define MMC_PROFILE_DVD_PLUS_R 0x001B
316: #define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
317: #define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
318: #define MMC_PROFILE_BD_ROM 0x0040
319: #define MMC_PROFILE_BD_R_SRM 0x0041
320: #define MMC_PROFILE_BD_R_RRM 0x0042
321: #define MMC_PROFILE_BD_RE 0x0043
322: #define MMC_PROFILE_HDDVD_ROM 0x0050
323: #define MMC_PROFILE_HDDVD_R 0x0051
324: #define MMC_PROFILE_HDDVD_RAM 0x0052
325: #define MMC_PROFILE_HDDVD_RW 0x0053
326: #define MMC_PROFILE_HDDVD_R_DL 0x0058
327: #define MMC_PROFILE_HDDVD_RW_DL 0x005A
328: #define MMC_PROFILE_INVALID 0xFFFF
329:
330: #define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
331: #define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
332: #define ATAPI_INT_REASON_REL 0x04
333: #define ATAPI_INT_REASON_TAG 0xf8
334:
335: /* same constants as bochs */
336: #define ASC_ILLEGAL_OPCODE 0x20
337: #define ASC_LOGICAL_BLOCK_OOR 0x21
338: #define ASC_INV_FIELD_IN_CMD_PACKET 0x24
339: #define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
340: #define ASC_INCOMPATIBLE_FORMAT 0x30
341: #define ASC_MEDIUM_NOT_PRESENT 0x3a
342: #define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
343: #define ASC_MEDIA_REMOVAL_PREVENTED 0x53
344:
345: #define CFA_NO_ERROR 0x00
346: #define CFA_MISC_ERROR 0x09
347: #define CFA_INVALID_COMMAND 0x20
348: #define CFA_INVALID_ADDRESS 0x21
349: #define CFA_ADDRESS_OVERFLOW 0x2f
350:
351: #define SENSE_NONE 0
352: #define SENSE_NOT_READY 2
353: #define SENSE_ILLEGAL_REQUEST 5
354: #define SENSE_UNIT_ATTENTION 6
355:
356: #define SMART_READ_DATA 0xd0
357: #define SMART_READ_THRESH 0xd1
358: #define SMART_ATTR_AUTOSAVE 0xd2
359: #define SMART_SAVE_ATTR 0xd3
360: #define SMART_EXECUTE_OFFLINE 0xd4
361: #define SMART_READ_LOG 0xd5
362: #define SMART_WRITE_LOG 0xd6
363: #define SMART_ENABLE 0xd8
364: #define SMART_DISABLE 0xd9
365: #define SMART_STATUS 0xda
366:
1.1.1.4 root 367: typedef enum { IDE_HD, IDE_CD, IDE_CFATA } IDEDriveKind;
368:
1.1 root 369: typedef void EndTransferFunc(IDEState *);
370:
1.1.1.5 ! root 371: typedef void DMAStartFunc(IDEDMA *, IDEState *, BlockDriverCompletionFunc *);
! 372: typedef int DMAFunc(IDEDMA *);
! 373: typedef int DMAIntFunc(IDEDMA *, int);
! 374: typedef void DMARestartFunc(void *, int, int);
! 375:
1.1 root 376: /* NOTE: IDEState represents in fact one drive */
377: struct IDEState {
378: IDEBus *bus;
379: uint8_t unit;
380: /* ide config */
1.1.1.4 root 381: IDEDriveKind drive_kind;
1.1 root 382: int cylinders, heads, sectors;
383: int64_t nb_sectors;
384: int mult_sectors;
385: int identify_set;
386: uint8_t identify_data[512];
387: int drive_serial;
388: char drive_serial_str[21];
389: /* ide regs */
390: uint8_t feature;
391: uint8_t error;
392: uint32_t nsector;
393: uint8_t sector;
394: uint8_t lcyl;
395: uint8_t hcyl;
396: /* other part of tf for lba48 support */
397: uint8_t hob_feature;
398: uint8_t hob_nsector;
399: uint8_t hob_sector;
400: uint8_t hob_lcyl;
401: uint8_t hob_hcyl;
402:
403: uint8_t select;
404: uint8_t status;
405:
406: /* set for lba48 access */
407: uint8_t lba48;
408: BlockDriverState *bs;
1.1.1.2 root 409: char version[9];
1.1 root 410: /* ATAPI specific */
411: uint8_t sense_key;
412: uint8_t asc;
413: uint8_t cdrom_changed;
414: int packet_transfer_size;
415: int elementary_transfer_size;
416: int io_buffer_index;
417: int lba;
418: int cd_sector_size;
419: int atapi_dma; /* true if dma is requested for the packet cmd */
420: /* ATA DMA state */
421: int io_buffer_size;
422: QEMUSGList sg;
423: /* PIO transfer handling */
424: int req_nb_sectors; /* number of sectors per interrupt */
425: EndTransferFunc *end_transfer_func;
426: uint8_t *data_ptr;
427: uint8_t *data_end;
428: uint8_t *io_buffer;
1.1.1.2 root 429: /* PIO save/restore */
430: int32_t io_buffer_total_len;
431: int cur_io_buffer_offset;
432: int cur_io_buffer_len;
433: uint8_t end_transfer_fn_idx;
1.1 root 434: QEMUTimer *sector_write_timer; /* only used for win2k install hack */
435: uint32_t irq_count; /* counts IRQs when using win2k install hack */
436: /* CF-ATA extended error */
437: uint8_t ext_error;
438: /* CF-ATA metadata storage */
439: uint32_t mdata_size;
440: uint8_t *mdata_storage;
441: int media_changed;
442: int is_read;
443: /* SMART */
444: uint8_t smart_enabled;
445: uint8_t smart_autosave;
446: int smart_errors;
447: uint8_t smart_selftest_count;
448: uint8_t *smart_selftest_data;
1.1.1.5 ! root 449: /* AHCI */
! 450: int ncq_queues;
! 451: };
! 452:
! 453: struct IDEDMAOps {
! 454: DMAStartFunc *start_dma;
! 455: DMAFunc *start_transfer;
! 456: DMAIntFunc *prepare_buf;
! 457: DMAIntFunc *rw_buf;
! 458: DMAIntFunc *set_unit;
! 459: DMAIntFunc *add_status;
! 460: DMAFunc *set_inactive;
! 461: DMARestartFunc *restart_cb;
! 462: DMAFunc *reset;
! 463: };
! 464:
! 465: struct IDEDMA {
! 466: const struct IDEDMAOps *ops;
! 467: struct iovec iov;
! 468: QEMUIOVector qiov;
! 469: BlockDriverAIOCB *aiocb;
1.1 root 470: };
471:
472: struct IDEBus {
473: BusState qbus;
474: IDEDevice *master;
475: IDEDevice *slave;
476: IDEState ifs[2];
1.1.1.5 ! root 477: int bus_id;
! 478: IDEDMA *dma;
1.1 root 479: uint8_t unit;
480: uint8_t cmd;
481: qemu_irq irq;
482: };
483:
484: struct IDEDevice {
485: DeviceState qdev;
486: uint32_t unit;
1.1.1.4 root 487: BlockConf conf;
1.1.1.2 root 488: char *version;
1.1.1.4 root 489: char *serial;
1.1 root 490: };
491:
492: typedef int (*ide_qdev_initfn)(IDEDevice *dev);
493: struct IDEDeviceInfo {
494: DeviceInfo qdev;
495: ide_qdev_initfn init;
496: };
497:
498: #define BM_STATUS_DMAING 0x01
499: #define BM_STATUS_ERROR 0x02
500: #define BM_STATUS_INT 0x04
501: #define BM_STATUS_DMA_RETRY 0x08
502: #define BM_STATUS_PIO_RETRY 0x10
1.1.1.5 ! root 503: #define BM_STATUS_RETRY_READ 0x20
! 504: #define BM_STATUS_RETRY_FLUSH 0x40
1.1 root 505:
506: #define BM_CMD_START 0x01
507: #define BM_CMD_READ 0x08
508:
509: static inline IDEState *idebus_active_if(IDEBus *bus)
510: {
511: return bus->ifs + bus->unit;
512: }
513:
514: static inline void ide_set_irq(IDEBus *bus)
515: {
516: if (!(bus->cmd & IDE_CMD_DISABLE_IRQ)) {
517: qemu_irq_raise(bus->irq);
518: }
519: }
520:
521: /* hw/ide/core.c */
522: extern const VMStateDescription vmstate_ide_bus;
523:
524: #define VMSTATE_IDE_BUS(_field, _state) \
525: VMSTATE_STRUCT(_field, _state, 1, vmstate_ide_bus, IDEBus)
526:
527: #define VMSTATE_IDE_BUS_ARRAY(_field, _state, _num) \
528: VMSTATE_STRUCT_ARRAY(_field, _state, _num, 1, vmstate_ide_bus, IDEBus)
529:
530: extern const VMStateDescription vmstate_ide_drive;
531:
532: #define VMSTATE_IDE_DRIVES(_field, _state) \
533: VMSTATE_STRUCT_ARRAY(_field, _state, 2, 3, vmstate_ide_drive, IDEState)
534:
535: void ide_bus_reset(IDEBus *bus);
536: int64_t ide_get_sector(IDEState *s);
537: void ide_set_sector(IDEState *s, int64_t sector_num);
538:
539: void ide_dma_error(IDEState *s);
540:
541: void ide_atapi_cmd_ok(IDEState *s);
542: void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
543: void ide_atapi_io_error(IDEState *s, int ret);
544:
545: void ide_ioport_write(void *opaque, uint32_t addr, uint32_t val);
546: uint32_t ide_ioport_read(void *opaque, uint32_t addr1);
547: uint32_t ide_status_read(void *opaque, uint32_t addr);
548: void ide_cmd_write(void *opaque, uint32_t addr, uint32_t val);
549: void ide_data_writew(void *opaque, uint32_t addr, uint32_t val);
550: uint32_t ide_data_readw(void *opaque, uint32_t addr);
551: void ide_data_writel(void *opaque, uint32_t addr, uint32_t val);
552: uint32_t ide_data_readl(void *opaque, uint32_t addr);
553:
1.1.1.4 root 554: int ide_init_drive(IDEState *s, BlockDriverState *bs,
555: const char *version, const char *serial);
556: void ide_init2(IDEBus *bus, qemu_irq irq);
557: void ide_init2_with_non_qdev_drives(IDEBus *bus, DriveInfo *hd0,
558: DriveInfo *hd1, qemu_irq irq);
1.1 root 559: void ide_init_ioport(IDEBus *bus, int iobase, int iobase2);
560:
1.1.1.5 ! root 561: void ide_exec_cmd(IDEBus *bus, uint32_t val);
! 562: void ide_dma_cb(void *opaque, int ret);
! 563: void ide_sector_write(IDEState *s);
! 564: void ide_sector_read(IDEState *s);
! 565: void ide_flush_cache(IDEState *s);
! 566:
1.1 root 567: /* hw/ide/qdev.c */
1.1.1.5 ! root 568: void ide_bus_new(IDEBus *idebus, DeviceState *dev, int bus_id);
1.1 root 569: IDEDevice *ide_create_drive(IDEBus *bus, int unit, DriveInfo *drive);
570:
571: #endif /* HW_IDE_INTERNAL_H */
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.