|
|
1.1 root 1: /*
2: * PXA270-based Intel Mainstone platforms.
3: *
4: * Copyright (c) 2007 by Armin Kuster <[email protected]> or
5: * <[email protected]>
6: *
7: * Code based on spitz platform by Andrzej Zaborowski <[email protected]>
8: *
9: * This code is licensed under the GNU GPL v2.
10: */
11: #include "hw.h"
12: #include "pxa.h"
13: #include "arm-misc.h"
14: #include "net.h"
15: #include "devices.h"
16: #include "boards.h"
17: #include "mainstone.h"
18: #include "sysemu.h"
19: #include "flash.h"
20:
21: static struct keymap map[0xE0] = {
22: [0 ... 0xDF] = { -1, -1 },
23: [0x1e] = {0,0}, /* a */
24: [0x30] = {0,1}, /* b */
25: [0x2e] = {0,2}, /* c */
26: [0x20] = {0,3}, /* d */
27: [0x12] = {0,4}, /* e */
28: [0x21] = {0,5}, /* f */
29: [0x22] = {1,0}, /* g */
30: [0x23] = {1,1}, /* h */
31: [0x17] = {1,2}, /* i */
32: [0x24] = {1,3}, /* j */
33: [0x25] = {1,4}, /* k */
34: [0x26] = {1,5}, /* l */
35: [0x32] = {2,0}, /* m */
36: [0x31] = {2,1}, /* n */
37: [0x18] = {2,2}, /* o */
38: [0x19] = {2,3}, /* p */
39: [0x10] = {2,4}, /* q */
40: [0x13] = {2,5}, /* r */
41: [0x1f] = {3,0}, /* s */
42: [0x14] = {3,1}, /* t */
43: [0x16] = {3,2}, /* u */
44: [0x2f] = {3,3}, /* v */
45: [0x11] = {3,4}, /* w */
46: [0x2d] = {3,5}, /* x */
47: [0x15] = {4,2}, /* y */
48: [0x2c] = {4,3}, /* z */
49: [0xc7] = {5,0}, /* Home */
50: [0x2a] = {5,1}, /* shift */
51: [0x39] = {5,2}, /* space */
52: [0x39] = {5,3}, /* space */
53: [0x1c] = {5,5}, /* enter */
54: [0xc8] = {6,0}, /* up */
55: [0xd0] = {6,1}, /* down */
56: [0xcb] = {6,2}, /* left */
57: [0xcd] = {6,3}, /* right */
58: };
59:
60: enum mainstone_model_e { mainstone };
61:
1.1.1.2 root 62: #define MAINSTONE_RAM 0x04000000
63: #define MAINSTONE_ROM 0x00800000
64: #define MAINSTONE_FLASH 0x02000000
65:
66: static struct arm_boot_info mainstone_binfo = {
67: .loader_start = PXA2XX_SDRAM_BASE,
68: .ram_size = 0x04000000,
69: };
70:
1.1.1.3 root 71: static void mainstone_common_init(ram_addr_t ram_size,
1.1.1.2 root 72: const char *kernel_filename,
1.1 root 73: const char *kernel_cmdline, const char *initrd_filename,
74: const char *cpu_model, enum mainstone_model_e model, int arm_id)
75: {
76: uint32_t sector_len = 256 * 1024;
77: target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
1.1.1.3 root 78: PXA2xxState *cpu;
1.1 root 79: qemu_irq *mst_irq;
1.1.1.4 root 80: DriveInfo *dinfo;
81: int i;
1.1.1.5 ! root 82: int be;
1.1 root 83:
84: if (!cpu_model)
85: cpu_model = "pxa270-c5";
86:
87: /* Setup CPU & memory */
1.1.1.2 root 88: cpu = pxa270_init(mainstone_binfo.ram_size, cpu_model);
89: cpu_register_physical_memory(0, MAINSTONE_ROM,
1.1.1.5 ! root 90: qemu_ram_alloc(NULL, "mainstone.rom",
! 91: MAINSTONE_ROM) | IO_MEM_ROM);
1.1 root 92:
1.1.1.5 ! root 93: #ifdef TARGET_WORDS_BIGENDIAN
! 94: be = 1;
! 95: #else
! 96: be = 0;
! 97: #endif
1.1 root 98: /* There are two 32MiB flash devices on the board */
99: for (i = 0; i < 2; i ++) {
1.1.1.4 root 100: dinfo = drive_get(IF_PFLASH, 0, i);
101: if (!dinfo) {
1.1 root 102: fprintf(stderr, "Two flash images must be given with the "
103: "'pflash' parameter\n");
104: exit(1);
105: }
106:
107: if (!pflash_cfi01_register(mainstone_flash_base[i],
1.1.1.5 ! root 108: qemu_ram_alloc(NULL, "mainstone.flash",
! 109: MAINSTONE_FLASH),
! 110: dinfo->bdrv, sector_len,
! 111: MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0,
! 112: be)) {
1.1 root 113: fprintf(stderr, "qemu: Error registering flash memory.\n");
114: exit(1);
115: }
116: }
117:
118: mst_irq = mst_irq_init(cpu, MST_FPGA_PHYS, PXA2XX_PIC_GPIO_0);
119:
120: /* setup keypad */
121: printf("map addr %p\n", &map);
122: pxa27x_register_keypad(cpu->kp, map, 0xe0);
123:
124: /* MMC/SD host */
125: pxa2xx_mmci_handlers(cpu->mmc, NULL, mst_irq[MMC_IRQ]);
126:
127: smc91c111_init(&nd_table[0], MST_ETH_PHYS, mst_irq[ETHERNET_IRQ]);
128:
1.1.1.2 root 129: mainstone_binfo.kernel_filename = kernel_filename;
130: mainstone_binfo.kernel_cmdline = kernel_cmdline;
131: mainstone_binfo.initrd_filename = initrd_filename;
132: mainstone_binfo.board_id = arm_id;
133: arm_load_kernel(cpu->env, &mainstone_binfo);
1.1 root 134: }
135:
1.1.1.3 root 136: static void mainstone_init(ram_addr_t ram_size,
1.1.1.2 root 137: const char *boot_device,
1.1 root 138: const char *kernel_filename, const char *kernel_cmdline,
139: const char *initrd_filename, const char *cpu_model)
140: {
1.1.1.3 root 141: mainstone_common_init(ram_size, kernel_filename,
1.1 root 142: kernel_cmdline, initrd_filename, cpu_model, mainstone, 0x196);
143: }
144:
1.1.1.3 root 145: static QEMUMachine mainstone2_machine = {
1.1.1.2 root 146: .name = "mainstone",
147: .desc = "Mainstone II (PXA27x)",
148: .init = mainstone_init,
1.1 root 149: };
1.1.1.3 root 150:
151: static void mainstone_machine_init(void)
152: {
153: qemu_register_machine(&mainstone2_machine);
154: }
155:
156: machine_init(mainstone_machine_init);
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.