![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to sm501.c CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Qemu by Fabrice Bellard] / qemu / hw|
Return to sm501.c CVS log | Up to [Qemu by Fabrice Bellard] / qemu / hw |
1.1 root 1: /*
2: * QEMU SM501 Device
3: *
4: * Copyright (c) 2008 Shin-ichiro KAWASAKI
5: *
6: * Permission is hereby granted, free of charge, to any person obtaining a copy
7: * of this software and associated documentation files (the "Software"), to deal
8: * in the Software without restriction, including without limitation the rights
9: * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10: * copies of the Software, and to permit persons to whom the Software is
11: * furnished to do so, subject to the following conditions:
12: *
13: * The above copyright notice and this permission notice shall be included in
14: * all copies or substantial portions of the Software.
15: *
16: * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17: * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18: * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19: * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20: * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21: * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22: * THE SOFTWARE.
23: */
24:
25: #include <stdio.h>
26: #include "hw.h"
27: #include "pc.h"
28: #include "console.h"
29: #include "devices.h"
1.1.1.4 root 30: #include "sysbus.h"
31: #include "qdev-addr.h"
1.1.1.5 root 32: #include "range.h"
1.1 root 33:
34: /*
1.1.1.4 root 35: * Status: 2010/05/07
1.1 root 36: * - Minimum implementation for Linux console : mmio regs and CRT layer.
1.1.1.4 root 37: * - 2D grapihcs acceleration partially supported : only fill rectangle.
1.1 root 38: *
39: * TODO:
40: * - Panel support
41: * - Touch panel support
42: * - USB support
43: * - UART support
1.1.1.4 root 44: * - More 2D graphics engine support
1.1 root 45: * - Performance tuning
46: */
47:
48: //#define DEBUG_SM501
49: //#define DEBUG_BITBLT
50:
51: #ifdef DEBUG_SM501
1.1.1.2 root 52: #define SM501_DPRINTF(fmt, ...) printf(fmt, ## __VA_ARGS__)
1.1 root 53: #else
1.1.1.2 root 54: #define SM501_DPRINTF(fmt, ...) do {} while(0)
1.1 root 55: #endif
56:
57:
58: #define MMIO_BASE_OFFSET 0x3e00000
59:
60: /* SM501 register definitions taken from "linux/include/linux/sm501-regs.h" */
61:
62: /* System Configuration area */
63: /* System config base */
64: #define SM501_SYS_CONFIG (0x000000)
65:
66: /* config 1 */
67: #define SM501_SYSTEM_CONTROL (0x000000)
68:
69: #define SM501_SYSCTRL_PANEL_TRISTATE (1<<0)
70: #define SM501_SYSCTRL_MEM_TRISTATE (1<<1)
71: #define SM501_SYSCTRL_CRT_TRISTATE (1<<2)
72:
73: #define SM501_SYSCTRL_PCI_SLAVE_BURST_MASK (3<<4)
74: #define SM501_SYSCTRL_PCI_SLAVE_BURST_1 (0<<4)
75: #define SM501_SYSCTRL_PCI_SLAVE_BURST_2 (1<<4)
76: #define SM501_SYSCTRL_PCI_SLAVE_BURST_4 (2<<4)
77: #define SM501_SYSCTRL_PCI_SLAVE_BURST_8 (3<<4)
78:
79: #define SM501_SYSCTRL_PCI_CLOCK_RUN_EN (1<<6)
80: #define SM501_SYSCTRL_PCI_RETRY_DISABLE (1<<7)
81: #define SM501_SYSCTRL_PCI_SUBSYS_LOCK (1<<11)
82: #define SM501_SYSCTRL_PCI_BURST_READ_EN (1<<15)
83:
84: /* miscellaneous control */
85:
86: #define SM501_MISC_CONTROL (0x000004)
87:
88: #define SM501_MISC_BUS_SH (0x0)
89: #define SM501_MISC_BUS_PCI (0x1)
90: #define SM501_MISC_BUS_XSCALE (0x2)
91: #define SM501_MISC_BUS_NEC (0x6)
92: #define SM501_MISC_BUS_MASK (0x7)
93:
94: #define SM501_MISC_VR_62MB (1<<3)
95: #define SM501_MISC_CDR_RESET (1<<7)
96: #define SM501_MISC_USB_LB (1<<8)
97: #define SM501_MISC_USB_SLAVE (1<<9)
98: #define SM501_MISC_BL_1 (1<<10)
99: #define SM501_MISC_MC (1<<11)
100: #define SM501_MISC_DAC_POWER (1<<12)
101: #define SM501_MISC_IRQ_INVERT (1<<16)
102: #define SM501_MISC_SH (1<<17)
103:
104: #define SM501_MISC_HOLD_EMPTY (0<<18)
105: #define SM501_MISC_HOLD_8 (1<<18)
106: #define SM501_MISC_HOLD_16 (2<<18)
107: #define SM501_MISC_HOLD_24 (3<<18)
108: #define SM501_MISC_HOLD_32 (4<<18)
109: #define SM501_MISC_HOLD_MASK (7<<18)
110:
111: #define SM501_MISC_FREQ_12 (1<<24)
112: #define SM501_MISC_PNL_24BIT (1<<25)
113: #define SM501_MISC_8051_LE (1<<26)
114:
115:
116:
117: #define SM501_GPIO31_0_CONTROL (0x000008)
118: #define SM501_GPIO63_32_CONTROL (0x00000C)
119: #define SM501_DRAM_CONTROL (0x000010)
120:
121: /* command list */
122: #define SM501_ARBTRTN_CONTROL (0x000014)
123:
124: /* command list */
125: #define SM501_COMMAND_LIST_STATUS (0x000024)
126:
127: /* interrupt debug */
128: #define SM501_RAW_IRQ_STATUS (0x000028)
129: #define SM501_RAW_IRQ_CLEAR (0x000028)
130: #define SM501_IRQ_STATUS (0x00002C)
131: #define SM501_IRQ_MASK (0x000030)
132: #define SM501_DEBUG_CONTROL (0x000034)
133:
134: /* power management */
135: #define SM501_POWERMODE_P2X_SRC (1<<29)
136: #define SM501_POWERMODE_V2X_SRC (1<<20)
137: #define SM501_POWERMODE_M_SRC (1<<12)
138: #define SM501_POWERMODE_M1_SRC (1<<4)
139:
140: #define SM501_CURRENT_GATE (0x000038)
141: #define SM501_CURRENT_CLOCK (0x00003C)
142: #define SM501_POWER_MODE_0_GATE (0x000040)
143: #define SM501_POWER_MODE_0_CLOCK (0x000044)
144: #define SM501_POWER_MODE_1_GATE (0x000048)
145: #define SM501_POWER_MODE_1_CLOCK (0x00004C)
146: #define SM501_SLEEP_MODE_GATE (0x000050)
147: #define SM501_POWER_MODE_CONTROL (0x000054)
148:
149: /* power gates for units within the 501 */
150: #define SM501_GATE_HOST (0)
151: #define SM501_GATE_MEMORY (1)
152: #define SM501_GATE_DISPLAY (2)
153: #define SM501_GATE_2D_ENGINE (3)
154: #define SM501_GATE_CSC (4)
155: #define SM501_GATE_ZVPORT (5)
156: #define SM501_GATE_GPIO (6)
157: #define SM501_GATE_UART0 (7)
158: #define SM501_GATE_UART1 (8)
159: #define SM501_GATE_SSP (10)
160: #define SM501_GATE_USB_HOST (11)
161: #define SM501_GATE_USB_GADGET (12)
162: #define SM501_GATE_UCONTROLLER (17)
163: #define SM501_GATE_AC97 (18)
164:
165: /* panel clock */
166: #define SM501_CLOCK_P2XCLK (24)
167: /* crt clock */
168: #define SM501_CLOCK_V2XCLK (16)
169: /* main clock */
170: #define SM501_CLOCK_MCLK (8)
171: /* SDRAM controller clock */
172: #define SM501_CLOCK_M1XCLK (0)
173:
174: /* config 2 */
175: #define SM501_PCI_MASTER_BASE (0x000058)
176: #define SM501_ENDIAN_CONTROL (0x00005C)
177: #define SM501_DEVICEID (0x000060)
178: /* 0x050100A0 */
179:
180: #define SM501_DEVICEID_SM501 (0x05010000)
181: #define SM501_DEVICEID_IDMASK (0xffff0000)
182: #define SM501_DEVICEID_REVMASK (0x000000ff)
183:
184: #define SM501_PLLCLOCK_COUNT (0x000064)
185: #define SM501_MISC_TIMING (0x000068)
186: #define SM501_CURRENT_SDRAM_CLOCK (0x00006C)
187:
188: #define SM501_PROGRAMMABLE_PLL_CONTROL (0x000074)
189:
190: /* GPIO base */
191: #define SM501_GPIO (0x010000)
192: #define SM501_GPIO_DATA_LOW (0x00)
193: #define SM501_GPIO_DATA_HIGH (0x04)
194: #define SM501_GPIO_DDR_LOW (0x08)
195: #define SM501_GPIO_DDR_HIGH (0x0C)
196: #define SM501_GPIO_IRQ_SETUP (0x10)
197: #define SM501_GPIO_IRQ_STATUS (0x14)
198: #define SM501_GPIO_IRQ_RESET (0x14)
199:
200: /* I2C controller base */
201: #define SM501_I2C (0x010040)
202: #define SM501_I2C_BYTE_COUNT (0x00)
203: #define SM501_I2C_CONTROL (0x01)
204: #define SM501_I2C_STATUS (0x02)
205: #define SM501_I2C_RESET (0x02)
206: #define SM501_I2C_SLAVE_ADDRESS (0x03)
207: #define SM501_I2C_DATA (0x04)
208:
209: /* SSP base */
210: #define SM501_SSP (0x020000)
211:
212: /* Uart 0 base */
213: #define SM501_UART0 (0x030000)
214:
215: /* Uart 1 base */
216: #define SM501_UART1 (0x030020)
217:
218: /* USB host port base */
219: #define SM501_USB_HOST (0x040000)
220:
221: /* USB slave/gadget base */
222: #define SM501_USB_GADGET (0x060000)
223:
224: /* USB slave/gadget data port base */
225: #define SM501_USB_GADGET_DATA (0x070000)
226:
227: /* Display controller/video engine base */
228: #define SM501_DC (0x080000)
229:
230: /* common defines for the SM501 address registers */
231: #define SM501_ADDR_FLIP (1<<31)
232: #define SM501_ADDR_EXT (1<<27)
233: #define SM501_ADDR_CS1 (1<<26)
234: #define SM501_ADDR_MASK (0x3f << 26)
235:
236: #define SM501_FIFO_MASK (0x3 << 16)
237: #define SM501_FIFO_1 (0x0 << 16)
238: #define SM501_FIFO_3 (0x1 << 16)
239: #define SM501_FIFO_7 (0x2 << 16)
240: #define SM501_FIFO_11 (0x3 << 16)
241:
242: /* common registers for panel and the crt */
243: #define SM501_OFF_DC_H_TOT (0x000)
244: #define SM501_OFF_DC_V_TOT (0x008)
245: #define SM501_OFF_DC_H_SYNC (0x004)
246: #define SM501_OFF_DC_V_SYNC (0x00C)
247:
248: #define SM501_DC_PANEL_CONTROL (0x000)
249:
250: #define SM501_DC_PANEL_CONTROL_FPEN (1<<27)
251: #define SM501_DC_PANEL_CONTROL_BIAS (1<<26)
252: #define SM501_DC_PANEL_CONTROL_DATA (1<<25)
253: #define SM501_DC_PANEL_CONTROL_VDD (1<<24)
254: #define SM501_DC_PANEL_CONTROL_DP (1<<23)
255:
256: #define SM501_DC_PANEL_CONTROL_TFT_888 (0<<21)
257: #define SM501_DC_PANEL_CONTROL_TFT_333 (1<<21)
258: #define SM501_DC_PANEL_CONTROL_TFT_444 (2<<21)
259:
260: #define SM501_DC_PANEL_CONTROL_DE (1<<20)
261:
262: #define SM501_DC_PANEL_CONTROL_LCD_TFT (0<<18)
263: #define SM501_DC_PANEL_CONTROL_LCD_STN8 (1<<18)
264: #define SM501_DC_PANEL_CONTROL_LCD_STN12 (2<<18)
265:
266: #define SM501_DC_PANEL_CONTROL_CP (1<<14)
267: #define SM501_DC_PANEL_CONTROL_VSP (1<<13)
268: #define SM501_DC_PANEL_CONTROL_HSP (1<<12)
269: #define SM501_DC_PANEL_CONTROL_CK (1<<9)
270: #define SM501_DC_PANEL_CONTROL_TE (1<<8)
271: #define SM501_DC_PANEL_CONTROL_VPD (1<<7)
272: #define SM501_DC_PANEL_CONTROL_VP (1<<6)
273: #define SM501_DC_PANEL_CONTROL_HPD (1<<5)
274: #define SM501_DC_PANEL_CONTROL_HP (1<<4)
275: #define SM501_DC_PANEL_CONTROL_GAMMA (1<<3)
276: #define SM501_DC_PANEL_CONTROL_EN (1<<2)
277:
278: #define SM501_DC_PANEL_CONTROL_8BPP (0<<0)
279: #define SM501_DC_PANEL_CONTROL_16BPP (1<<0)
280: #define SM501_DC_PANEL_CONTROL_32BPP (2<<0)
281:
282:
283: #define SM501_DC_PANEL_PANNING_CONTROL (0x004)
284: #define SM501_DC_PANEL_COLOR_KEY (0x008)
285: #define SM501_DC_PANEL_FB_ADDR (0x00C)
286: #define SM501_DC_PANEL_FB_OFFSET (0x010)
287: #define SM501_DC_PANEL_FB_WIDTH (0x014)
288: #define SM501_DC_PANEL_FB_HEIGHT (0x018)
289: #define SM501_DC_PANEL_TL_LOC (0x01C)
290: #define SM501_DC_PANEL_BR_LOC (0x020)
291: #define SM501_DC_PANEL_H_TOT (0x024)
292: #define SM501_DC_PANEL_H_SYNC (0x028)
293: #define SM501_DC_PANEL_V_TOT (0x02C)
294: #define SM501_DC_PANEL_V_SYNC (0x030)
295: #define SM501_DC_PANEL_CUR_LINE (0x034)
296:
297: #define SM501_DC_VIDEO_CONTROL (0x040)
298: #define SM501_DC_VIDEO_FB0_ADDR (0x044)
299: #define SM501_DC_VIDEO_FB_WIDTH (0x048)
300: #define SM501_DC_VIDEO_FB0_LAST_ADDR (0x04C)
301: #define SM501_DC_VIDEO_TL_LOC (0x050)
302: #define SM501_DC_VIDEO_BR_LOC (0x054)
303: #define SM501_DC_VIDEO_SCALE (0x058)
304: #define SM501_DC_VIDEO_INIT_SCALE (0x05C)
305: #define SM501_DC_VIDEO_YUV_CONSTANTS (0x060)
306: #define SM501_DC_VIDEO_FB1_ADDR (0x064)
307: #define SM501_DC_VIDEO_FB1_LAST_ADDR (0x068)
308:
309: #define SM501_DC_VIDEO_ALPHA_CONTROL (0x080)
310: #define SM501_DC_VIDEO_ALPHA_FB_ADDR (0x084)
311: #define SM501_DC_VIDEO_ALPHA_FB_OFFSET (0x088)
312: #define SM501_DC_VIDEO_ALPHA_FB_LAST_ADDR (0x08C)
313: #define SM501_DC_VIDEO_ALPHA_TL_LOC (0x090)
314: #define SM501_DC_VIDEO_ALPHA_BR_LOC (0x094)
315: #define SM501_DC_VIDEO_ALPHA_SCALE (0x098)
316: #define SM501_DC_VIDEO_ALPHA_INIT_SCALE (0x09C)
317: #define SM501_DC_VIDEO_ALPHA_CHROMA_KEY (0x0A0)
318: #define SM501_DC_VIDEO_ALPHA_COLOR_LOOKUP (0x0A4)
319:
320: #define SM501_DC_PANEL_HWC_BASE (0x0F0)
321: #define SM501_DC_PANEL_HWC_ADDR (0x0F0)
322: #define SM501_DC_PANEL_HWC_LOC (0x0F4)
323: #define SM501_DC_PANEL_HWC_COLOR_1_2 (0x0F8)
324: #define SM501_DC_PANEL_HWC_COLOR_3 (0x0FC)
325:
326: #define SM501_HWC_EN (1<<31)
327:
328: #define SM501_OFF_HWC_ADDR (0x00)
329: #define SM501_OFF_HWC_LOC (0x04)
330: #define SM501_OFF_HWC_COLOR_1_2 (0x08)
331: #define SM501_OFF_HWC_COLOR_3 (0x0C)
332:
333: #define SM501_DC_ALPHA_CONTROL (0x100)
334: #define SM501_DC_ALPHA_FB_ADDR (0x104)
335: #define SM501_DC_ALPHA_FB_OFFSET (0x108)
336: #define SM501_DC_ALPHA_TL_LOC (0x10C)
337: #define SM501_DC_ALPHA_BR_LOC (0x110)
338: #define SM501_DC_ALPHA_CHROMA_KEY (0x114)
339: #define SM501_DC_ALPHA_COLOR_LOOKUP (0x118)
340:
341: #define SM501_DC_CRT_CONTROL (0x200)
342:
343: #define SM501_DC_CRT_CONTROL_TVP (1<<15)
344: #define SM501_DC_CRT_CONTROL_CP (1<<14)
345: #define SM501_DC_CRT_CONTROL_VSP (1<<13)
346: #define SM501_DC_CRT_CONTROL_HSP (1<<12)
347: #define SM501_DC_CRT_CONTROL_VS (1<<11)
348: #define SM501_DC_CRT_CONTROL_BLANK (1<<10)
349: #define SM501_DC_CRT_CONTROL_SEL (1<<9)
350: #define SM501_DC_CRT_CONTROL_TE (1<<8)
351: #define SM501_DC_CRT_CONTROL_PIXEL_MASK (0xF << 4)
352: #define SM501_DC_CRT_CONTROL_GAMMA (1<<3)
353: #define SM501_DC_CRT_CONTROL_ENABLE (1<<2)
354:
355: #define SM501_DC_CRT_CONTROL_8BPP (0<<0)
356: #define SM501_DC_CRT_CONTROL_16BPP (1<<0)
357: #define SM501_DC_CRT_CONTROL_32BPP (2<<0)
358:
359: #define SM501_DC_CRT_FB_ADDR (0x204)
360: #define SM501_DC_CRT_FB_OFFSET (0x208)
361: #define SM501_DC_CRT_H_TOT (0x20C)
362: #define SM501_DC_CRT_H_SYNC (0x210)
363: #define SM501_DC_CRT_V_TOT (0x214)
364: #define SM501_DC_CRT_V_SYNC (0x218)
365: #define SM501_DC_CRT_SIGNATURE_ANALYZER (0x21C)
366: #define SM501_DC_CRT_CUR_LINE (0x220)
367: #define SM501_DC_CRT_MONITOR_DETECT (0x224)
368:
369: #define SM501_DC_CRT_HWC_BASE (0x230)
370: #define SM501_DC_CRT_HWC_ADDR (0x230)
371: #define SM501_DC_CRT_HWC_LOC (0x234)
372: #define SM501_DC_CRT_HWC_COLOR_1_2 (0x238)
373: #define SM501_DC_CRT_HWC_COLOR_3 (0x23C)
374:
375: #define SM501_DC_PANEL_PALETTE (0x400)
376:
377: #define SM501_DC_VIDEO_PALETTE (0x800)
378:
379: #define SM501_DC_CRT_PALETTE (0xC00)
380:
381: /* Zoom Video port base */
382: #define SM501_ZVPORT (0x090000)
383:
384: /* AC97/I2S base */
385: #define SM501_AC97 (0x0A0000)
386:
387: /* 8051 micro controller base */
388: #define SM501_UCONTROLLER (0x0B0000)
389:
390: /* 8051 micro controller SRAM base */
391: #define SM501_UCONTROLLER_SRAM (0x0C0000)
392:
393: /* DMA base */
394: #define SM501_DMA (0x0D0000)
395:
396: /* 2d engine base */
397: #define SM501_2D_ENGINE (0x100000)
398: #define SM501_2D_SOURCE (0x00)
399: #define SM501_2D_DESTINATION (0x04)
400: #define SM501_2D_DIMENSION (0x08)
401: #define SM501_2D_CONTROL (0x0C)
402: #define SM501_2D_PITCH (0x10)
403: #define SM501_2D_FOREGROUND (0x14)
404: #define SM501_2D_BACKGROUND (0x18)
405: #define SM501_2D_STRETCH (0x1C)
406: #define SM501_2D_COLOR_COMPARE (0x20)
407: #define SM501_2D_COLOR_COMPARE_MASK (0x24)
408: #define SM501_2D_MASK (0x28)
409: #define SM501_2D_CLIP_TL (0x2C)
410: #define SM501_2D_CLIP_BR (0x30)
411: #define SM501_2D_MONO_PATTERN_LOW (0x34)
412: #define SM501_2D_MONO_PATTERN_HIGH (0x38)
413: #define SM501_2D_WINDOW_WIDTH (0x3C)
414: #define SM501_2D_SOURCE_BASE (0x40)
415: #define SM501_2D_DESTINATION_BASE (0x44)
416: #define SM501_2D_ALPHA (0x48)
417: #define SM501_2D_WRAP (0x4C)
418: #define SM501_2D_STATUS (0x50)
419:
420: #define SM501_CSC_Y_SOURCE_BASE (0xC8)
421: #define SM501_CSC_CONSTANTS (0xCC)
422: #define SM501_CSC_Y_SOURCE_X (0xD0)
423: #define SM501_CSC_Y_SOURCE_Y (0xD4)
424: #define SM501_CSC_U_SOURCE_BASE (0xD8)
425: #define SM501_CSC_V_SOURCE_BASE (0xDC)
426: #define SM501_CSC_SOURCE_DIMENSION (0xE0)
427: #define SM501_CSC_SOURCE_PITCH (0xE4)
428: #define SM501_CSC_DESTINATION (0xE8)
429: #define SM501_CSC_DESTINATION_DIMENSION (0xEC)
430: #define SM501_CSC_DESTINATION_PITCH (0xF0)
431: #define SM501_CSC_SCALE_FACTOR (0xF4)
432: #define SM501_CSC_DESTINATION_BASE (0xF8)
433: #define SM501_CSC_CONTROL (0xFC)
434:
435: /* 2d engine data port base */
436: #define SM501_2D_ENGINE_DATA (0x110000)
437:
438: /* end of register definitions */
439:
1.1.1.4 root 440: #define SM501_HWC_WIDTH (64)
441: #define SM501_HWC_HEIGHT (64)
1.1 root 442:
443: /* SM501 local memory size taken from "linux/drivers/mfd/sm501.c" */
444: static const uint32_t sm501_mem_local_size[] = {
445: [0] = 4*1024*1024,
446: [1] = 8*1024*1024,
447: [2] = 16*1024*1024,
448: [3] = 32*1024*1024,
449: [4] = 64*1024*1024,
450: [5] = 2*1024*1024,
451: };
452: #define get_local_mem_size(s) sm501_mem_local_size[(s)->local_mem_size_index]
453:
454: typedef struct SM501State {
455: /* graphic console status */
456: DisplayState *ds;
457:
458: /* status & internal resources */
459: target_phys_addr_t base;
460: uint32_t local_mem_size_index;
461: uint8_t * local_mem;
1.1.1.6 root 462: MemoryRegion local_mem_region;
1.1 root 463: uint32_t last_width;
464: uint32_t last_height;
465:
466: /* mmio registers */
467: uint32_t system_control;
468: uint32_t misc_control;
469: uint32_t gpio_31_0_control;
470: uint32_t gpio_63_32_control;
471: uint32_t dram_control;
472: uint32_t irq_mask;
473: uint32_t misc_timing;
474: uint32_t power_mode_control;
475:
476: uint32_t uart0_ier;
477: uint32_t uart0_lcr;
478: uint32_t uart0_mcr;
479: uint32_t uart0_scr;
480:
481: uint8_t dc_palette[0x400 * 3];
482:
483: uint32_t dc_panel_control;
484: uint32_t dc_panel_panning_control;
485: uint32_t dc_panel_fb_addr;
486: uint32_t dc_panel_fb_offset;
487: uint32_t dc_panel_fb_width;
488: uint32_t dc_panel_fb_height;
489: uint32_t dc_panel_tl_location;
490: uint32_t dc_panel_br_location;
491: uint32_t dc_panel_h_total;
492: uint32_t dc_panel_h_sync;
493: uint32_t dc_panel_v_total;
494: uint32_t dc_panel_v_sync;
495:
496: uint32_t dc_panel_hwc_addr;
497: uint32_t dc_panel_hwc_location;
498: uint32_t dc_panel_hwc_color_1_2;
499: uint32_t dc_panel_hwc_color_3;
500:
501: uint32_t dc_crt_control;
502: uint32_t dc_crt_fb_addr;
503: uint32_t dc_crt_fb_offset;
504: uint32_t dc_crt_h_total;
505: uint32_t dc_crt_h_sync;
506: uint32_t dc_crt_v_total;
507: uint32_t dc_crt_v_sync;
508:
509: uint32_t dc_crt_hwc_addr;
510: uint32_t dc_crt_hwc_location;
511: uint32_t dc_crt_hwc_color_1_2;
512: uint32_t dc_crt_hwc_color_3;
513:
1.1.1.5 root 514: uint32_t twoD_source;
1.1.1.4 root 515: uint32_t twoD_destination;
516: uint32_t twoD_dimension;
517: uint32_t twoD_control;
518: uint32_t twoD_pitch;
519: uint32_t twoD_foreground;
520: uint32_t twoD_stretch;
521: uint32_t twoD_color_compare_mask;
522: uint32_t twoD_mask;
523: uint32_t twoD_window_width;
524: uint32_t twoD_source_base;
525: uint32_t twoD_destination_base;
526:
1.1 root 527: } SM501State;
528:
529: static uint32_t get_local_mem_size_index(uint32_t size)
530: {
531: uint32_t norm_size = 0;
532: int i, index = 0;
533:
534: for (i = 0; i < ARRAY_SIZE(sm501_mem_local_size); i++) {
535: uint32_t new_size = sm501_mem_local_size[i];
536: if (new_size >= size) {
537: if (norm_size == 0 || norm_size > new_size) {
538: norm_size = new_size;
539: index = i;
540: }
541: }
542: }
543:
544: return index;
545: }
546:
1.1.1.4 root 547: /**
548: * Check the availability of hardware cursor.
549: * @param crt 0 for PANEL, 1 for CRT.
550: */
551: static inline int is_hwc_enabled(SM501State *state, int crt)
552: {
553: uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr;
554: return addr & 0x80000000;
555: }
556:
557: /**
558: * Get the address which holds cursor pattern data.
559: * @param crt 0 for PANEL, 1 for CRT.
560: */
561: static inline uint32_t get_hwc_address(SM501State *state, int crt)
562: {
563: uint32_t addr = crt ? state->dc_crt_hwc_addr : state->dc_panel_hwc_addr;
564: return (addr & 0x03FFFFF0)/* >> 4*/;
565: }
566:
567: /**
568: * Get the cursor position in y coordinate.
569: * @param crt 0 for PANEL, 1 for CRT.
570: */
571: static inline uint32_t get_hwc_y(SM501State *state, int crt)
572: {
573: uint32_t location = crt ? state->dc_crt_hwc_location
574: : state->dc_panel_hwc_location;
575: return (location & 0x07FF0000) >> 16;
576: }
577:
578: /**
579: * Get the cursor position in x coordinate.
580: * @param crt 0 for PANEL, 1 for CRT.
581: */
582: static inline uint32_t get_hwc_x(SM501State *state, int crt)
583: {
584: uint32_t location = crt ? state->dc_crt_hwc_location
585: : state->dc_panel_hwc_location;
586: return location & 0x000007FF;
587: }
588:
589: /**
590: * Get the cursor position in x coordinate.
591: * @param crt 0 for PANEL, 1 for CRT.
592: * @param index 0, 1, 2 or 3 which specifies color of corsor dot.
593: */
594: static inline uint16_t get_hwc_color(SM501State *state, int crt, int index)
595: {
1.1.1.7 ! root 596: uint32_t color_reg = 0;
1.1.1.4 root 597: uint16_t color_565 = 0;
598:
599: if (index == 0) {
600: return 0;
601: }
602:
603: switch (index) {
604: case 1:
605: case 2:
606: color_reg = crt ? state->dc_crt_hwc_color_1_2
607: : state->dc_panel_hwc_color_1_2;
608: break;
609: case 3:
610: color_reg = crt ? state->dc_crt_hwc_color_3
611: : state->dc_panel_hwc_color_3;
612: break;
613: default:
614: printf("invalid hw cursor color.\n");
615: abort();
616: }
617:
618: switch (index) {
619: case 1:
620: case 3:
621: color_565 = (uint16_t)(color_reg & 0xFFFF);
622: break;
623: case 2:
624: color_565 = (uint16_t)((color_reg >> 16) & 0xFFFF);
625: break;
626: }
627: return color_565;
628: }
629:
630: static int within_hwc_y_range(SM501State *state, int y, int crt)
631: {
632: int hwc_y = get_hwc_y(state, crt);
633: return (hwc_y <= y && y < hwc_y + SM501_HWC_HEIGHT);
634: }
635:
636: static void sm501_2d_operation(SM501State * s)
637: {
638: /* obtain operation parameters */
639: int operation = (s->twoD_control >> 16) & 0x1f;
1.1.1.5 root 640: int rtl = s->twoD_control & 0x8000000;
641: int src_x = (s->twoD_source >> 16) & 0x01FFF;
642: int src_y = s->twoD_source & 0xFFFF;
1.1.1.4 root 643: int dst_x = (s->twoD_destination >> 16) & 0x01FFF;
644: int dst_y = s->twoD_destination & 0xFFFF;
645: int operation_width = (s->twoD_dimension >> 16) & 0x1FFF;
646: int operation_height = s->twoD_dimension & 0xFFFF;
647: uint32_t color = s->twoD_foreground;
648: int format_flags = (s->twoD_stretch >> 20) & 0x3;
649: int addressing = (s->twoD_stretch >> 16) & 0xF;
650:
651: /* get frame buffer info */
652: uint8_t * src = s->local_mem + (s->twoD_source_base & 0x03FFFFFF);
653: uint8_t * dst = s->local_mem + (s->twoD_destination_base & 0x03FFFFFF);
1.1.1.5 root 654: int src_width = (s->dc_crt_h_total & 0x00000FFF) + 1;
1.1.1.4 root 655: int dst_width = (s->dc_crt_h_total & 0x00000FFF) + 1;
656:
657: if (addressing != 0x0) {
658: printf("%s: only XY addressing is supported.\n", __func__);
659: abort();
660: }
661:
662: if ((s->twoD_source_base & 0x08000000) ||
663: (s->twoD_destination_base & 0x08000000)) {
664: printf("%s: only local memory is supported.\n", __func__);
665: abort();
666: }
667:
668: switch (operation) {
1.1.1.5 root 669: case 0x00: /* copy area */
670: #define COPY_AREA(_bpp, _pixel_type, rtl) { \
671: int y, x, index_d, index_s; \
672: for (y = 0; y < operation_height; y++) { \
673: for (x = 0; x < operation_width; x++) { \
674: if (rtl) { \
675: index_s = ((src_y - y) * src_width + src_x - x) * _bpp; \
676: index_d = ((dst_y - y) * dst_width + dst_x - x) * _bpp; \
677: } else { \
678: index_s = ((src_y + y) * src_width + src_x + x) * _bpp; \
679: index_d = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
680: } \
681: *(_pixel_type*)&dst[index_d] = *(_pixel_type*)&src[index_s];\
682: } \
683: } \
684: }
685: switch (format_flags) {
686: case 0:
687: COPY_AREA(1, uint8_t, rtl);
688: break;
689: case 1:
690: COPY_AREA(2, uint16_t, rtl);
691: break;
692: case 2:
693: COPY_AREA(4, uint32_t, rtl);
694: break;
695: }
696: break;
1.1.1.4 root 697:
1.1.1.5 root 698: case 0x01: /* fill rectangle */
1.1.1.4 root 699: #define FILL_RECT(_bpp, _pixel_type) { \
700: int y, x; \
701: for (y = 0; y < operation_height; y++) { \
702: for (x = 0; x < operation_width; x++) { \
703: int index = ((dst_y + y) * dst_width + dst_x + x) * _bpp; \
704: *(_pixel_type*)&dst[index] = (_pixel_type)color; \
705: } \
706: } \
707: }
708:
709: switch (format_flags) {
710: case 0:
711: FILL_RECT(1, uint8_t);
712: break;
713: case 1:
714: FILL_RECT(2, uint16_t);
715: break;
716: case 2:
717: FILL_RECT(4, uint32_t);
718: break;
719: }
720: break;
721:
722: default:
723: printf("non-implemented SM501 2D operation. %d\n", operation);
724: abort();
725: break;
726: }
727: }
728:
1.1.1.6 root 729: static uint64_t sm501_system_config_read(void *opaque, target_phys_addr_t addr,
730: unsigned size)
1.1 root 731: {
732: SM501State * s = (SM501State *)opaque;
733: uint32_t ret = 0;
734: SM501_DPRINTF("sm501 system config regs : read addr=%x\n", (int)addr);
735:
736: switch(addr) {
737: case SM501_SYSTEM_CONTROL:
738: ret = s->system_control;
739: break;
740: case SM501_MISC_CONTROL:
741: ret = s->misc_control;
742: break;
743: case SM501_GPIO31_0_CONTROL:
744: ret = s->gpio_31_0_control;
745: break;
746: case SM501_GPIO63_32_CONTROL:
747: ret = s->gpio_63_32_control;
748: break;
749: case SM501_DEVICEID:
750: ret = 0x050100A0;
751: break;
752: case SM501_DRAM_CONTROL:
753: ret = (s->dram_control & 0x07F107C0) | s->local_mem_size_index << 13;
754: break;
755: case SM501_IRQ_MASK:
756: ret = s->irq_mask;
757: break;
758: case SM501_MISC_TIMING:
759: /* TODO : simulate gate control */
760: ret = s->misc_timing;
761: break;
762: case SM501_CURRENT_GATE:
763: /* TODO : simulate gate control */
764: ret = 0x00021807;
765: break;
766: case SM501_CURRENT_CLOCK:
767: ret = 0x2A1A0A09;
768: break;
769: case SM501_POWER_MODE_CONTROL:
770: ret = s->power_mode_control;
771: break;
772:
773: default:
774: printf("sm501 system config : not implemented register read."
775: " addr=%x\n", (int)addr);
1.1.1.4 root 776: abort();
1.1 root 777: }
778:
779: return ret;
780: }
781:
1.1.1.6 root 782: static void sm501_system_config_write(void *opaque, target_phys_addr_t addr,
783: uint64_t value, unsigned size)
1.1 root 784: {
785: SM501State * s = (SM501State *)opaque;
786: SM501_DPRINTF("sm501 system config regs : write addr=%x, val=%x\n",
1.1.1.6 root 787: (uint32_t)addr, (uint32_t)value);
1.1 root 788:
789: switch(addr) {
790: case SM501_SYSTEM_CONTROL:
791: s->system_control = value & 0xE300B8F7;
792: break;
793: case SM501_MISC_CONTROL:
794: s->misc_control = value & 0xFF7FFF20;
795: break;
796: case SM501_GPIO31_0_CONTROL:
797: s->gpio_31_0_control = value;
798: break;
799: case SM501_GPIO63_32_CONTROL:
800: s->gpio_63_32_control = value;
801: break;
802: case SM501_DRAM_CONTROL:
803: s->local_mem_size_index = (value >> 13) & 0x7;
804: /* rODO : check validity of size change */
805: s->dram_control |= value & 0x7FFFFFC3;
806: break;
807: case SM501_IRQ_MASK:
808: s->irq_mask = value;
809: break;
810: case SM501_MISC_TIMING:
811: s->misc_timing = value & 0xF31F1FFF;
812: break;
813: case SM501_POWER_MODE_0_GATE:
814: case SM501_POWER_MODE_1_GATE:
815: case SM501_POWER_MODE_0_CLOCK:
816: case SM501_POWER_MODE_1_CLOCK:
817: /* TODO : simulate gate & clock control */
818: break;
819: case SM501_POWER_MODE_CONTROL:
820: s->power_mode_control = value & 0x00000003;
821: break;
822:
823: default:
824: printf("sm501 system config : not implemented register write."
1.1.1.6 root 825: " addr=%x, val=%x\n", (int)addr, (uint32_t)value);
1.1.1.4 root 826: abort();
1.1 root 827: }
828: }
829:
1.1.1.6 root 830: static const MemoryRegionOps sm501_system_config_ops = {
831: .read = sm501_system_config_read,
832: .write = sm501_system_config_write,
833: .valid = {
834: .min_access_size = 4,
835: .max_access_size = 4,
836: },
837: .endianness = DEVICE_NATIVE_ENDIAN,
1.1 root 838: };
839:
840: static uint32_t sm501_palette_read(void *opaque, target_phys_addr_t addr)
841: {
842: SM501State * s = (SM501State *)opaque;
843: SM501_DPRINTF("sm501 palette read addr=%x\n", (int)addr);
844:
845: /* TODO : consider BYTE/WORD access */
846: /* TODO : consider endian */
847:
1.1.1.5 root 848: assert(range_covers_byte(0, 0x400 * 3, addr));
1.1 root 849: return *(uint32_t*)&s->dc_palette[addr];
850: }
851:
852: static void sm501_palette_write(void *opaque,
853: target_phys_addr_t addr, uint32_t value)
854: {
855: SM501State * s = (SM501State *)opaque;
856: SM501_DPRINTF("sm501 palette write addr=%x, val=%x\n",
857: (int)addr, value);
858:
859: /* TODO : consider BYTE/WORD access */
860: /* TODO : consider endian */
861:
1.1.1.5 root 862: assert(range_covers_byte(0, 0x400 * 3, addr));
1.1 root 863: *(uint32_t*)&s->dc_palette[addr] = value;
864: }
865:
1.1.1.6 root 866: static uint64_t sm501_disp_ctrl_read(void *opaque, target_phys_addr_t addr,
867: unsigned size)
1.1 root 868: {
869: SM501State * s = (SM501State *)opaque;
870: uint32_t ret = 0;
871: SM501_DPRINTF("sm501 disp ctrl regs : read addr=%x\n", (int)addr);
872:
873: switch(addr) {
874:
875: case SM501_DC_PANEL_CONTROL:
876: ret = s->dc_panel_control;
877: break;
878: case SM501_DC_PANEL_PANNING_CONTROL:
879: ret = s->dc_panel_panning_control;
880: break;
881: case SM501_DC_PANEL_FB_ADDR:
882: ret = s->dc_panel_fb_addr;
883: break;
884: case SM501_DC_PANEL_FB_OFFSET:
885: ret = s->dc_panel_fb_offset;
886: break;
887: case SM501_DC_PANEL_FB_WIDTH:
888: ret = s->dc_panel_fb_width;
889: break;
890: case SM501_DC_PANEL_FB_HEIGHT:
891: ret = s->dc_panel_fb_height;
892: break;
893: case SM501_DC_PANEL_TL_LOC:
894: ret = s->dc_panel_tl_location;
895: break;
896: case SM501_DC_PANEL_BR_LOC:
897: ret = s->dc_panel_br_location;
898: break;
899:
900: case SM501_DC_PANEL_H_TOT:
901: ret = s->dc_panel_h_total;
902: break;
903: case SM501_DC_PANEL_H_SYNC:
904: ret = s->dc_panel_h_sync;
905: break;
906: case SM501_DC_PANEL_V_TOT:
907: ret = s->dc_panel_v_total;
908: break;
909: case SM501_DC_PANEL_V_SYNC:
910: ret = s->dc_panel_v_sync;
911: break;
912:
913: case SM501_DC_CRT_CONTROL:
914: ret = s->dc_crt_control;
915: break;
916: case SM501_DC_CRT_FB_ADDR:
917: ret = s->dc_crt_fb_addr;
918: break;
919: case SM501_DC_CRT_FB_OFFSET:
920: ret = s->dc_crt_fb_offset;
921: break;
922: case SM501_DC_CRT_H_TOT:
923: ret = s->dc_crt_h_total;
924: break;
925: case SM501_DC_CRT_H_SYNC:
926: ret = s->dc_crt_h_sync;
927: break;
928: case SM501_DC_CRT_V_TOT:
929: ret = s->dc_crt_v_total;
930: break;
931: case SM501_DC_CRT_V_SYNC:
932: ret = s->dc_crt_v_sync;
933: break;
934:
935: case SM501_DC_CRT_HWC_ADDR:
936: ret = s->dc_crt_hwc_addr;
937: break;
938: case SM501_DC_CRT_HWC_LOC:
1.1.1.4 root 939: ret = s->dc_crt_hwc_location;
1.1 root 940: break;
941: case SM501_DC_CRT_HWC_COLOR_1_2:
1.1.1.4 root 942: ret = s->dc_crt_hwc_color_1_2;
1.1 root 943: break;
944: case SM501_DC_CRT_HWC_COLOR_3:
1.1.1.4 root 945: ret = s->dc_crt_hwc_color_3;
1.1 root 946: break;
947:
948: case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
949: ret = sm501_palette_read(opaque, addr - SM501_DC_PANEL_PALETTE);
950: break;
951:
952: default:
953: printf("sm501 disp ctrl : not implemented register read."
954: " addr=%x\n", (int)addr);
1.1.1.4 root 955: abort();
1.1 root 956: }
957:
958: return ret;
959: }
960:
1.1.1.6 root 961: static void sm501_disp_ctrl_write(void *opaque, target_phys_addr_t addr,
962: uint64_t value, unsigned size)
1.1 root 963: {
964: SM501State * s = (SM501State *)opaque;
965: SM501_DPRINTF("sm501 disp ctrl regs : write addr=%x, val=%x\n",
1.1.1.6 root 966: (unsigned)addr, (unsigned)value);
1.1 root 967:
968: switch(addr) {
969: case SM501_DC_PANEL_CONTROL:
970: s->dc_panel_control = value & 0x0FFF73FF;
971: break;
972: case SM501_DC_PANEL_PANNING_CONTROL:
973: s->dc_panel_panning_control = value & 0xFF3FFF3F;
974: break;
975: case SM501_DC_PANEL_FB_ADDR:
976: s->dc_panel_fb_addr = value & 0x8FFFFFF0;
977: break;
978: case SM501_DC_PANEL_FB_OFFSET:
979: s->dc_panel_fb_offset = value & 0x3FF03FF0;
980: break;
981: case SM501_DC_PANEL_FB_WIDTH:
982: s->dc_panel_fb_width = value & 0x0FFF0FFF;
983: break;
984: case SM501_DC_PANEL_FB_HEIGHT:
985: s->dc_panel_fb_height = value & 0x0FFF0FFF;
986: break;
987: case SM501_DC_PANEL_TL_LOC:
988: s->dc_panel_tl_location = value & 0x07FF07FF;
989: break;
990: case SM501_DC_PANEL_BR_LOC:
991: s->dc_panel_br_location = value & 0x07FF07FF;
992: break;
993:
994: case SM501_DC_PANEL_H_TOT:
995: s->dc_panel_h_total = value & 0x0FFF0FFF;
996: break;
997: case SM501_DC_PANEL_H_SYNC:
998: s->dc_panel_h_sync = value & 0x00FF0FFF;
999: break;
1000: case SM501_DC_PANEL_V_TOT:
1001: s->dc_panel_v_total = value & 0x0FFF0FFF;
1002: break;
1003: case SM501_DC_PANEL_V_SYNC:
1004: s->dc_panel_v_sync = value & 0x003F0FFF;
1005: break;
1006:
1007: case SM501_DC_PANEL_HWC_ADDR:
1008: s->dc_panel_hwc_addr = value & 0x8FFFFFF0;
1009: break;
1010: case SM501_DC_PANEL_HWC_LOC:
1.1.1.4 root 1011: s->dc_panel_hwc_location = value & 0x0FFF0FFF;
1.1 root 1012: break;
1013: case SM501_DC_PANEL_HWC_COLOR_1_2:
1.1.1.4 root 1014: s->dc_panel_hwc_color_1_2 = value;
1.1 root 1015: break;
1016: case SM501_DC_PANEL_HWC_COLOR_3:
1.1.1.4 root 1017: s->dc_panel_hwc_color_3 = value & 0x0000FFFF;
1.1 root 1018: break;
1019:
1020: case SM501_DC_CRT_CONTROL:
1021: s->dc_crt_control = value & 0x0003FFFF;
1022: break;
1023: case SM501_DC_CRT_FB_ADDR:
1024: s->dc_crt_fb_addr = value & 0x8FFFFFF0;
1025: break;
1026: case SM501_DC_CRT_FB_OFFSET:
1027: s->dc_crt_fb_offset = value & 0x3FF03FF0;
1028: break;
1029: case SM501_DC_CRT_H_TOT:
1030: s->dc_crt_h_total = value & 0x0FFF0FFF;
1031: break;
1032: case SM501_DC_CRT_H_SYNC:
1033: s->dc_crt_h_sync = value & 0x00FF0FFF;
1034: break;
1035: case SM501_DC_CRT_V_TOT:
1036: s->dc_crt_v_total = value & 0x0FFF0FFF;
1037: break;
1038: case SM501_DC_CRT_V_SYNC:
1039: s->dc_crt_v_sync = value & 0x003F0FFF;
1040: break;
1041:
1042: case SM501_DC_CRT_HWC_ADDR:
1043: s->dc_crt_hwc_addr = value & 0x8FFFFFF0;
1044: break;
1045: case SM501_DC_CRT_HWC_LOC:
1.1.1.4 root 1046: s->dc_crt_hwc_location = value & 0x0FFF0FFF;
1.1 root 1047: break;
1048: case SM501_DC_CRT_HWC_COLOR_1_2:
1.1.1.4 root 1049: s->dc_crt_hwc_color_1_2 = value;
1.1 root 1050: break;
1051: case SM501_DC_CRT_HWC_COLOR_3:
1.1.1.4 root 1052: s->dc_crt_hwc_color_3 = value & 0x0000FFFF;
1.1 root 1053: break;
1054:
1055: case SM501_DC_PANEL_PALETTE ... SM501_DC_PANEL_PALETTE + 0x400*3 - 4:
1056: sm501_palette_write(opaque, addr - SM501_DC_PANEL_PALETTE, value);
1057: break;
1058:
1059: default:
1060: printf("sm501 disp ctrl : not implemented register write."
1.1.1.6 root 1061: " addr=%x, val=%x\n", (int)addr, (unsigned)value);
1.1.1.4 root 1062: abort();
1.1 root 1063: }
1064: }
1065:
1.1.1.6 root 1066: static const MemoryRegionOps sm501_disp_ctrl_ops = {
1067: .read = sm501_disp_ctrl_read,
1068: .write = sm501_disp_ctrl_write,
1069: .valid = {
1070: .min_access_size = 4,
1071: .max_access_size = 4,
1072: },
1073: .endianness = DEVICE_NATIVE_ENDIAN,
1.1 root 1074: };
1075:
1.1.1.6 root 1076: static uint64_t sm501_2d_engine_read(void *opaque, target_phys_addr_t addr,
1077: unsigned size)
1.1.1.4 root 1078: {
1079: SM501State * s = (SM501State *)opaque;
1080: uint32_t ret = 0;
1081: SM501_DPRINTF("sm501 2d engine regs : read addr=%x\n", (int)addr);
1082:
1083: switch(addr) {
1084: case SM501_2D_SOURCE_BASE:
1085: ret = s->twoD_source_base;
1086: break;
1087: default:
1088: printf("sm501 disp ctrl : not implemented register read."
1089: " addr=%x\n", (int)addr);
1090: abort();
1091: }
1092:
1093: return ret;
1094: }
1095:
1.1.1.6 root 1096: static void sm501_2d_engine_write(void *opaque, target_phys_addr_t addr,
1097: uint64_t value, unsigned size)
1.1.1.4 root 1098: {
1099: SM501State * s = (SM501State *)opaque;
1100: SM501_DPRINTF("sm501 2d engine regs : write addr=%x, val=%x\n",
1.1.1.6 root 1101: (unsigned)addr, (unsigned)value);
1.1.1.4 root 1102:
1103: switch(addr) {
1.1.1.5 root 1104: case SM501_2D_SOURCE:
1105: s->twoD_source = value;
1106: break;
1.1.1.4 root 1107: case SM501_2D_DESTINATION:
1108: s->twoD_destination = value;
1109: break;
1110: case SM501_2D_DIMENSION:
1111: s->twoD_dimension = value;
1112: break;
1113: case SM501_2D_CONTROL:
1114: s->twoD_control = value;
1115:
1116: /* do 2d operation if start flag is set. */
1117: if (value & 0x80000000) {
1118: sm501_2d_operation(s);
1119: s->twoD_control &= ~0x80000000; /* start flag down */
1120: }
1121:
1122: break;
1123: case SM501_2D_PITCH:
1124: s->twoD_pitch = value;
1125: break;
1126: case SM501_2D_FOREGROUND:
1127: s->twoD_foreground = value;
1128: break;
1129: case SM501_2D_STRETCH:
1130: s->twoD_stretch = value;
1131: break;
1132: case SM501_2D_COLOR_COMPARE_MASK:
1133: s->twoD_color_compare_mask = value;
1134: break;
1135: case SM501_2D_MASK:
1136: s->twoD_mask = value;
1137: break;
1138: case SM501_2D_WINDOW_WIDTH:
1139: s->twoD_window_width = value;
1140: break;
1141: case SM501_2D_SOURCE_BASE:
1142: s->twoD_source_base = value;
1143: break;
1144: case SM501_2D_DESTINATION_BASE:
1145: s->twoD_destination_base = value;
1146: break;
1147: default:
1148: printf("sm501 2d engine : not implemented register write."
1.1.1.6 root 1149: " addr=%x, val=%x\n", (int)addr, (unsigned)value);
1.1.1.4 root 1150: abort();
1151: }
1152: }
1153:
1.1.1.6 root 1154: static const MemoryRegionOps sm501_2d_engine_ops = {
1155: .read = sm501_2d_engine_read,
1156: .write = sm501_2d_engine_write,
1157: .valid = {
1158: .min_access_size = 4,
1159: .max_access_size = 4,
1160: },
1161: .endianness = DEVICE_NATIVE_ENDIAN,
1.1.1.4 root 1162: };
1163:
1.1 root 1164: /* draw line functions for all console modes */
1165:
1166: #include "pixel_ops.h"
1167:
1168: typedef void draw_line_func(uint8_t *d, const uint8_t *s,
1169: int width, const uint32_t *pal);
1170:
1.1.1.4 root 1171: typedef void draw_hwc_line_func(SM501State * s, int crt, uint8_t * palette,
1172: int c_y, uint8_t *d, int width);
1173:
1.1 root 1174: #define DEPTH 8
1175: #include "sm501_template.h"
1176:
1177: #define DEPTH 15
1178: #include "sm501_template.h"
1179:
1180: #define BGR_FORMAT
1181: #define DEPTH 15
1182: #include "sm501_template.h"
1183:
1184: #define DEPTH 16
1185: #include "sm501_template.h"
1186:
1187: #define BGR_FORMAT
1188: #define DEPTH 16
1189: #include "sm501_template.h"
1190:
1191: #define DEPTH 32
1192: #include "sm501_template.h"
1193:
1194: #define BGR_FORMAT
1195: #define DEPTH 32
1196: #include "sm501_template.h"
1197:
1198: static draw_line_func * draw_line8_funcs[] = {
1199: draw_line8_8,
1200: draw_line8_15,
1201: draw_line8_16,
1202: draw_line8_32,
1203: draw_line8_32bgr,
1204: draw_line8_15bgr,
1205: draw_line8_16bgr,
1206: };
1207:
1208: static draw_line_func * draw_line16_funcs[] = {
1209: draw_line16_8,
1210: draw_line16_15,
1211: draw_line16_16,
1212: draw_line16_32,
1213: draw_line16_32bgr,
1214: draw_line16_15bgr,
1215: draw_line16_16bgr,
1216: };
1217:
1218: static draw_line_func * draw_line32_funcs[] = {
1219: draw_line32_8,
1220: draw_line32_15,
1221: draw_line32_16,
1222: draw_line32_32,
1223: draw_line32_32bgr,
1224: draw_line32_15bgr,
1225: draw_line32_16bgr,
1226: };
1227:
1.1.1.4 root 1228: static draw_hwc_line_func * draw_hwc_line_funcs[] = {
1229: draw_hwc_line_8,
1230: draw_hwc_line_15,
1231: draw_hwc_line_16,
1232: draw_hwc_line_32,
1233: draw_hwc_line_32bgr,
1234: draw_hwc_line_15bgr,
1235: draw_hwc_line_16bgr,
1236: };
1237:
1.1 root 1238: static inline int get_depth_index(DisplayState *s)
1239: {
1240: switch(ds_get_bits_per_pixel(s)) {
1241: default:
1242: case 8:
1243: return 0;
1244: case 15:
1245: return 1;
1246: case 16:
1247: return 2;
1248: case 32:
1.1.1.2 root 1249: if (is_surface_bgr(s->surface))
1250: return 4;
1251: else
1252: return 3;
1.1 root 1253: }
1254: }
1255:
1256: static void sm501_draw_crt(SM501State * s)
1257: {
1258: int y;
1259: int width = (s->dc_crt_h_total & 0x00000FFF) + 1;
1260: int height = (s->dc_crt_v_total & 0x00000FFF) + 1;
1261:
1262: uint8_t * src = s->local_mem;
1263: int src_bpp = 0;
1264: int dst_bpp = ds_get_bytes_per_pixel(s->ds) + (ds_get_bits_per_pixel(s->ds) % 8 ? 1 : 0);
1265: uint32_t * palette = (uint32_t *)&s->dc_palette[SM501_DC_CRT_PALETTE
1266: - SM501_DC_PANEL_PALETTE];
1.1.1.4 root 1267: uint8_t hwc_palette[3 * 3];
1.1 root 1268: int ds_depth_index = get_depth_index(s->ds);
1269: draw_line_func * draw_line = NULL;
1.1.1.4 root 1270: draw_hwc_line_func * draw_hwc_line = NULL;
1.1 root 1271: int full_update = 0;
1272: int y_start = -1;
1.1.1.5 root 1273: ram_addr_t page_min = ~0l;
1274: ram_addr_t page_max = 0l;
1.1.1.6 root 1275: ram_addr_t offset = 0;
1.1 root 1276:
1277: /* choose draw_line function */
1278: switch (s->dc_crt_control & 3) {
1279: case SM501_DC_CRT_CONTROL_8BPP:
1280: src_bpp = 1;
1281: draw_line = draw_line8_funcs[ds_depth_index];
1282: break;
1283: case SM501_DC_CRT_CONTROL_16BPP:
1284: src_bpp = 2;
1285: draw_line = draw_line16_funcs[ds_depth_index];
1286: break;
1287: case SM501_DC_CRT_CONTROL_32BPP:
1288: src_bpp = 4;
1289: draw_line = draw_line32_funcs[ds_depth_index];
1290: break;
1291: default:
1292: printf("sm501 draw crt : invalid DC_CRT_CONTROL=%x.\n",
1293: s->dc_crt_control);
1.1.1.4 root 1294: abort();
1.1 root 1295: break;
1296: }
1297:
1.1.1.4 root 1298: /* set up to draw hardware cursor */
1299: if (is_hwc_enabled(s, 1)) {
1300: int i;
1301:
1302: /* get cursor palette */
1303: for (i = 0; i < 3; i++) {
1304: uint16_t rgb565 = get_hwc_color(s, 1, i + 1);
1305: hwc_palette[i * 3 + 0] = (rgb565 & 0xf800) >> 8; /* red */
1306: hwc_palette[i * 3 + 1] = (rgb565 & 0x07e0) >> 3; /* green */
1307: hwc_palette[i * 3 + 2] = (rgb565 & 0x001f) << 3; /* blue */
1308: }
1309:
1310: /* choose cursor draw line function */
1311: draw_hwc_line = draw_hwc_line_funcs[ds_depth_index];
1312: }
1313:
1.1 root 1314: /* adjust console size */
1315: if (s->last_width != width || s->last_height != height) {
1316: qemu_console_resize(s->ds, width, height);
1317: s->last_width = width;
1318: s->last_height = height;
1319: full_update = 1;
1320: }
1321:
1322: /* draw each line according to conditions */
1323: for (y = 0; y < height; y++) {
1.1.1.4 root 1324: int update_hwc = draw_hwc_line ? within_hwc_y_range(s, y, 1) : 0;
1325: int update = full_update || update_hwc;
1.1.1.7 ! root 1326: ram_addr_t page0 = offset;
! 1327: ram_addr_t page1 = offset + width * src_bpp - 1;
1.1 root 1328:
1329: /* check dirty flags for each line */
1.1.1.7 ! root 1330: update = memory_region_get_dirty(&s->local_mem_region, page0,
! 1331: page1 - page0, DIRTY_MEMORY_VGA);
1.1 root 1332:
1333: /* draw line and change status */
1334: if (update) {
1.1.1.4 root 1335: uint8_t * d = &(ds_get_data(s->ds)[y * width * dst_bpp]);
1336:
1337: /* draw graphics layer */
1338: draw_line(d, src, width, palette);
1339:
1340: /* draw haredware cursor */
1341: if (update_hwc) {
1342: draw_hwc_line(s, 1, hwc_palette, y - get_hwc_y(s, 1), d, width);
1343: }
1344:
1.1 root 1345: if (y_start < 0)
1346: y_start = y;
1347: if (page0 < page_min)
1348: page_min = page0;
1349: if (page1 > page_max)
1350: page_max = page1;
1351: } else {
1352: if (y_start >= 0) {
1353: /* flush to display */
1354: dpy_update(s->ds, 0, y_start, width, y - y_start);
1355: y_start = -1;
1356: }
1357: }
1358:
1359: src += width * src_bpp;
1.1.1.2 root 1360: offset += width * src_bpp;
1.1 root 1361: }
1362:
1363: /* complete flush to display */
1364: if (y_start >= 0)
1365: dpy_update(s->ds, 0, y_start, width, y - y_start);
1366:
1367: /* clear dirty flags */
1.1.1.5 root 1368: if (page_min != ~0l) {
1.1.1.6 root 1369: memory_region_reset_dirty(&s->local_mem_region,
1370: page_min, page_max + TARGET_PAGE_SIZE,
1371: DIRTY_MEMORY_VGA);
1.1.1.5 root 1372: }
1.1 root 1373: }
1374:
1375: static void sm501_update_display(void *opaque)
1376: {
1377: SM501State * s = (SM501State *)opaque;
1378:
1379: if (s->dc_crt_control & SM501_DC_CRT_CONTROL_ENABLE)
1380: sm501_draw_crt(s);
1381: }
1382:
1.1.1.6 root 1383: void sm501_init(MemoryRegion *address_space_mem, uint32_t base,
1384: uint32_t local_mem_bytes, qemu_irq irq, CharDriverState *chr)
1.1 root 1385: {
1386: SM501State * s;
1.1.1.4 root 1387: DeviceState *dev;
1.1.1.6 root 1388: MemoryRegion *sm501_system_config = g_new(MemoryRegion, 1);
1389: MemoryRegion *sm501_disp_ctrl = g_new(MemoryRegion, 1);
1390: MemoryRegion *sm501_2d_engine = g_new(MemoryRegion, 1);
1.1 root 1391:
1392: /* allocate management data region */
1.1.1.6 root 1393: s = (SM501State *)g_malloc0(sizeof(SM501State));
1.1 root 1394: s->base = base;
1395: s->local_mem_size_index
1396: = get_local_mem_size_index(local_mem_bytes);
1397: SM501_DPRINTF("local mem size=%x. index=%d\n", get_local_mem_size(s),
1398: s->local_mem_size_index);
1399: s->system_control = 0x00100000;
1400: s->misc_control = 0x00001000; /* assumes SH, active=low */
1401: s->dc_panel_control = 0x00010000;
1402: s->dc_crt_control = 0x00010000;
1403:
1404: /* allocate local memory */
1.1.1.7 ! root 1405: memory_region_init_ram(&s->local_mem_region, "sm501.local",
1.1.1.6 root 1406: local_mem_bytes);
1.1.1.7 ! root 1407: vmstate_register_ram_global(&s->local_mem_region);
1.1.1.6 root 1408: s->local_mem = memory_region_get_ram_ptr(&s->local_mem_region);
1409: memory_region_add_subregion(address_space_mem, base, &s->local_mem_region);
1.1 root 1410:
1411: /* map mmio */
1.1.1.6 root 1412: memory_region_init_io(sm501_system_config, &sm501_system_config_ops, s,
1413: "sm501-system-config", 0x6c);
1414: memory_region_add_subregion(address_space_mem, base + MMIO_BASE_OFFSET,
1415: sm501_system_config);
1416: memory_region_init_io(sm501_disp_ctrl, &sm501_disp_ctrl_ops, s,
1417: "sm501-disp-ctrl", 0x1000);
1418: memory_region_add_subregion(address_space_mem,
1419: base + MMIO_BASE_OFFSET + SM501_DC,
1420: sm501_disp_ctrl);
1421: memory_region_init_io(sm501_2d_engine, &sm501_2d_engine_ops, s,
1422: "sm501-2d-engine", 0x54);
1423: memory_region_add_subregion(address_space_mem,
1424: base + MMIO_BASE_OFFSET + SM501_2D_ENGINE,
1425: sm501_2d_engine);
1.1 root 1426:
1.1.1.2 root 1427: /* bridge to usb host emulation module */
1.1.1.4 root 1428: dev = qdev_create(NULL, "sysbus-ohci");
1429: qdev_prop_set_uint32(dev, "num-ports", 2);
1430: qdev_prop_set_taddr(dev, "dma-offset", base);
1431: qdev_init_nofail(dev);
1432: sysbus_mmio_map(sysbus_from_qdev(dev), 0,
1433: base + MMIO_BASE_OFFSET + SM501_USB_HOST);
1434: sysbus_connect_irq(sysbus_from_qdev(dev), 0, irq);
1.1.1.2 root 1435:
1.1 root 1436: /* bridge to serial emulation module */
1.1.1.4 root 1437: if (chr) {
1.1.1.6 root 1438: serial_mm_init(address_space_mem,
1439: base + MMIO_BASE_OFFSET + SM501_UART0, 2,
1.1.1.4 root 1440: NULL, /* TODO : chain irq to IRL */
1.1.1.6 root 1441: 115200, chr, DEVICE_NATIVE_ENDIAN);
1.1.1.4 root 1442: }
1.1 root 1443:
1444: /* create qemu graphic console */
1445: s->ds = graphic_console_init(sm501_update_display, NULL,
1446: NULL, NULL, s);
1447: }
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.