Annotation of qemu/hw/twl92230.c, revision 1.1

1.1     ! root        1: /*
        !             2:  * TI TWL92230C energy-management companion device for the OMAP24xx.
        !             3:  * Aka. Menelaus (N4200 MENELAUS1_V2.2)
        !             4:  *
        !             5:  * Copyright (C) 2008 Nokia Corporation
        !             6:  * Written by Andrzej Zaborowski <[email protected]>
        !             7:  *
        !             8:  * This program is free software; you can redistribute it and/or
        !             9:  * modify it under the terms of the GNU General Public License as
        !            10:  * published by the Free Software Foundation; either version 2 or
        !            11:  * (at your option) version 3 of the License.
        !            12:  *
        !            13:  * This program is distributed in the hope that it will be useful,
        !            14:  * but WITHOUT ANY WARRANTY; without even the implied warranty of
        !            15:  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
        !            16:  * GNU General Public License for more details.
        !            17:  *
        !            18:  * You should have received a copy of the GNU General Public License along
        !            19:  * with this program; if not, write to the Free Software Foundation, Inc.,
        !            20:  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
        !            21:  */
        !            22: 
        !            23: #include "hw.h"
        !            24: #include "qemu-timer.h"
        !            25: #include "i2c.h"
        !            26: #include "sysemu.h"
        !            27: #include "console.h"
        !            28: 
        !            29: #define VERBOSE 1
        !            30: 
        !            31: struct menelaus_s {
        !            32:     i2c_slave i2c;
        !            33:     qemu_irq irq;
        !            34: 
        !            35:     int firstbyte;
        !            36:     uint8_t reg;
        !            37: 
        !            38:     uint8_t vcore[5];
        !            39:     uint8_t dcdc[3];
        !            40:     uint8_t ldo[8];
        !            41:     uint8_t sleep[2];
        !            42:     uint8_t osc;
        !            43:     uint8_t detect;
        !            44:     uint16_t mask;
        !            45:     uint16_t status;
        !            46:     uint8_t dir;
        !            47:     uint8_t inputs;
        !            48:     uint8_t outputs;
        !            49:     uint8_t bbsms;
        !            50:     uint8_t pull[4];
        !            51:     uint8_t mmc_ctrl[3];
        !            52:     uint8_t mmc_debounce;
        !            53:     struct {
        !            54:         uint8_t ctrl;
        !            55:         uint16_t comp;
        !            56:         QEMUTimer *hz_tm;
        !            57:         int64_t next;
        !            58:         struct tm tm;
        !            59:         struct tm new;
        !            60:         struct tm alm;
        !            61:         int sec_offset;
        !            62:         int alm_sec;
        !            63:         int next_comp;
        !            64:     } rtc;
        !            65:     qemu_irq handler[3];
        !            66:     qemu_irq *in;
        !            67:     int pwrbtn_state;
        !            68:     qemu_irq pwrbtn;
        !            69: };
        !            70: 
        !            71: static inline void menelaus_update(struct menelaus_s *s)
        !            72: {
        !            73:     qemu_set_irq(s->irq, s->status & ~s->mask);
        !            74: }
        !            75: 
        !            76: static inline void menelaus_rtc_start(struct menelaus_s *s)
        !            77: {
        !            78:     s->rtc.next =+ qemu_get_clock(rt_clock);
        !            79:     qemu_mod_timer(s->rtc.hz_tm, s->rtc.next);
        !            80: }
        !            81: 
        !            82: static inline void menelaus_rtc_stop(struct menelaus_s *s)
        !            83: {
        !            84:     qemu_del_timer(s->rtc.hz_tm);
        !            85:     s->rtc.next =- qemu_get_clock(rt_clock);
        !            86:     if (s->rtc.next < 1)
        !            87:         s->rtc.next = 1;
        !            88: }
        !            89: 
        !            90: static void menelaus_rtc_update(struct menelaus_s *s)
        !            91: {
        !            92:     qemu_get_timedate(&s->rtc.tm, s->rtc.sec_offset);
        !            93: }
        !            94: 
        !            95: static void menelaus_alm_update(struct menelaus_s *s)
        !            96: {
        !            97:     if ((s->rtc.ctrl & 3) == 3)
        !            98:         s->rtc.alm_sec = qemu_timedate_diff(&s->rtc.alm) - s->rtc.sec_offset;
        !            99: }
        !           100: 
        !           101: static void menelaus_rtc_hz(void *opaque)
        !           102: {
        !           103:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           104: 
        !           105:     s->rtc.next_comp --;
        !           106:     s->rtc.alm_sec --;
        !           107:     s->rtc.next += 1000;
        !           108:     qemu_mod_timer(s->rtc.hz_tm, s->rtc.next);
        !           109:     if ((s->rtc.ctrl >> 3) & 3) {                              /* EVERY */
        !           110:         menelaus_rtc_update(s);
        !           111:         if (((s->rtc.ctrl >> 3) & 3) == 1 && !s->rtc.tm.tm_sec)
        !           112:             s->status |= 1 << 8;                               /* RTCTMR */
        !           113:         else if (((s->rtc.ctrl >> 3) & 3) == 2 && !s->rtc.tm.tm_min)
        !           114:             s->status |= 1 << 8;                               /* RTCTMR */
        !           115:         else if (!s->rtc.tm.tm_hour)
        !           116:             s->status |= 1 << 8;                               /* RTCTMR */
        !           117:     } else
        !           118:         s->status |= 1 << 8;                                   /* RTCTMR */
        !           119:     if ((s->rtc.ctrl >> 1) & 1) {                              /* RTC_AL_EN */
        !           120:         if (s->rtc.alm_sec == 0)
        !           121:             s->status |= 1 << 9;                               /* RTCALM */
        !           122:         /* TODO: wake-up */
        !           123:     }
        !           124:     if (s->rtc.next_comp <= 0) {
        !           125:         s->rtc.next -= muldiv64((int16_t) s->rtc.comp, 1000, 0x8000);
        !           126:         s->rtc.next_comp = 3600;
        !           127:     }
        !           128:     menelaus_update(s);
        !           129: }
        !           130: 
        !           131: static void menelaus_reset(i2c_slave *i2c)
        !           132: {
        !           133:     struct menelaus_s *s = (struct menelaus_s *) i2c;
        !           134:     s->reg = 0x00;
        !           135: 
        !           136:     s->vcore[0] = 0x0c;        /* XXX: X-loader needs 0x8c? check!  */
        !           137:     s->vcore[1] = 0x05;
        !           138:     s->vcore[2] = 0x02;
        !           139:     s->vcore[3] = 0x0c;
        !           140:     s->vcore[4] = 0x03;
        !           141:     s->dcdc[0] = 0x33; /* Depends on wiring */
        !           142:     s->dcdc[1] = 0x03;
        !           143:     s->dcdc[2] = 0x00;
        !           144:     s->ldo[0] = 0x95;
        !           145:     s->ldo[1] = 0x7e;
        !           146:     s->ldo[2] = 0x00;
        !           147:     s->ldo[3] = 0x00;  /* Depends on wiring */
        !           148:     s->ldo[4] = 0x03;  /* Depends on wiring */
        !           149:     s->ldo[5] = 0x00;
        !           150:     s->ldo[6] = 0x00;
        !           151:     s->ldo[7] = 0x00;
        !           152:     s->sleep[0] = 0x00;
        !           153:     s->sleep[1] = 0x00;
        !           154:     s->osc = 0x01;
        !           155:     s->detect = 0x09;
        !           156:     s->mask = 0x0fff;
        !           157:     s->status = 0;
        !           158:     s->dir = 0x07;
        !           159:     s->outputs = 0x00;
        !           160:     s->bbsms = 0x00;
        !           161:     s->pull[0] = 0x00;
        !           162:     s->pull[1] = 0x00;
        !           163:     s->pull[2] = 0x00;
        !           164:     s->pull[3] = 0x00;
        !           165:     s->mmc_ctrl[0] = 0x03;
        !           166:     s->mmc_ctrl[1] = 0xc0;
        !           167:     s->mmc_ctrl[2] = 0x00;
        !           168:     s->mmc_debounce = 0x05;
        !           169: 
        !           170:     if (s->rtc.ctrl & 1)
        !           171:         menelaus_rtc_stop(s);
        !           172:     s->rtc.ctrl = 0x00;
        !           173:     s->rtc.comp = 0x0000;
        !           174:     s->rtc.next = 1000;
        !           175:     s->rtc.sec_offset = 0;
        !           176:     s->rtc.next_comp = 1800;
        !           177:     s->rtc.alm_sec = 1800;
        !           178:     s->rtc.alm.tm_sec = 0x00;
        !           179:     s->rtc.alm.tm_min = 0x00;
        !           180:     s->rtc.alm.tm_hour = 0x00;
        !           181:     s->rtc.alm.tm_mday = 0x01;
        !           182:     s->rtc.alm.tm_mon = 0x00;
        !           183:     s->rtc.alm.tm_year = 2004;
        !           184:     menelaus_update(s);
        !           185: }
        !           186: 
        !           187: static inline uint8_t to_bcd(int val)
        !           188: {
        !           189:     return ((val / 10) << 4) | (val % 10);
        !           190: }
        !           191: 
        !           192: static inline int from_bcd(uint8_t val)
        !           193: {
        !           194:     return ((val >> 4) * 10) + (val & 0x0f);
        !           195: }
        !           196: 
        !           197: static void menelaus_gpio_set(void *opaque, int line, int level)
        !           198: {
        !           199:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           200: 
        !           201:     /* No interrupt generated */
        !           202:     s->inputs &= ~(1 << line);
        !           203:     s->inputs |= level << line;
        !           204: }
        !           205: 
        !           206: static void menelaus_pwrbtn_set(void *opaque, int line, int level)
        !           207: {
        !           208:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           209: 
        !           210:     if (!s->pwrbtn_state && level) {
        !           211:         s->status |= 1 << 11;                                  /* PSHBTN */
        !           212:         menelaus_update(s);
        !           213:     }
        !           214:     s->pwrbtn_state = level;
        !           215: }
        !           216: 
        !           217: #define MENELAUS_REV           0x01
        !           218: #define MENELAUS_VCORE_CTRL1   0x02
        !           219: #define MENELAUS_VCORE_CTRL2   0x03
        !           220: #define MENELAUS_VCORE_CTRL3   0x04
        !           221: #define MENELAUS_VCORE_CTRL4   0x05
        !           222: #define MENELAUS_VCORE_CTRL5   0x06
        !           223: #define MENELAUS_DCDC_CTRL1    0x07
        !           224: #define MENELAUS_DCDC_CTRL2    0x08
        !           225: #define MENELAUS_DCDC_CTRL3    0x09
        !           226: #define MENELAUS_LDO_CTRL1     0x0a
        !           227: #define MENELAUS_LDO_CTRL2     0x0b
        !           228: #define MENELAUS_LDO_CTRL3     0x0c
        !           229: #define MENELAUS_LDO_CTRL4     0x0d
        !           230: #define MENELAUS_LDO_CTRL5     0x0e
        !           231: #define MENELAUS_LDO_CTRL6     0x0f
        !           232: #define MENELAUS_LDO_CTRL7     0x10
        !           233: #define MENELAUS_LDO_CTRL8     0x11
        !           234: #define MENELAUS_SLEEP_CTRL1   0x12
        !           235: #define MENELAUS_SLEEP_CTRL2   0x13
        !           236: #define MENELAUS_DEVICE_OFF    0x14
        !           237: #define MENELAUS_OSC_CTRL      0x15
        !           238: #define MENELAUS_DETECT_CTRL   0x16
        !           239: #define MENELAUS_INT_MASK1     0x17
        !           240: #define MENELAUS_INT_MASK2     0x18
        !           241: #define MENELAUS_INT_STATUS1   0x19
        !           242: #define MENELAUS_INT_STATUS2   0x1a
        !           243: #define MENELAUS_INT_ACK1      0x1b
        !           244: #define MENELAUS_INT_ACK2      0x1c
        !           245: #define MENELAUS_GPIO_CTRL     0x1d
        !           246: #define MENELAUS_GPIO_IN       0x1e
        !           247: #define MENELAUS_GPIO_OUT      0x1f
        !           248: #define MENELAUS_BBSMS         0x20
        !           249: #define MENELAUS_RTC_CTRL      0x21
        !           250: #define MENELAUS_RTC_UPDATE    0x22
        !           251: #define MENELAUS_RTC_SEC       0x23
        !           252: #define MENELAUS_RTC_MIN       0x24
        !           253: #define MENELAUS_RTC_HR                0x25
        !           254: #define MENELAUS_RTC_DAY       0x26
        !           255: #define MENELAUS_RTC_MON       0x27
        !           256: #define MENELAUS_RTC_YR                0x28
        !           257: #define MENELAUS_RTC_WKDAY     0x29
        !           258: #define MENELAUS_RTC_AL_SEC    0x2a
        !           259: #define MENELAUS_RTC_AL_MIN    0x2b
        !           260: #define MENELAUS_RTC_AL_HR     0x2c
        !           261: #define MENELAUS_RTC_AL_DAY    0x2d
        !           262: #define MENELAUS_RTC_AL_MON    0x2e
        !           263: #define MENELAUS_RTC_AL_YR     0x2f
        !           264: #define MENELAUS_RTC_COMP_MSB  0x30
        !           265: #define MENELAUS_RTC_COMP_LSB  0x31
        !           266: #define MENELAUS_S1_PULL_EN    0x32
        !           267: #define MENELAUS_S1_PULL_DIR   0x33
        !           268: #define MENELAUS_S2_PULL_EN    0x34
        !           269: #define MENELAUS_S2_PULL_DIR   0x35
        !           270: #define MENELAUS_MCT_CTRL1     0x36
        !           271: #define MENELAUS_MCT_CTRL2     0x37
        !           272: #define MENELAUS_MCT_CTRL3     0x38
        !           273: #define MENELAUS_MCT_PIN_ST    0x39
        !           274: #define MENELAUS_DEBOUNCE1     0x3a
        !           275: 
        !           276: static uint8_t menelaus_read(void *opaque, uint8_t addr)
        !           277: {
        !           278:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           279:     int reg = 0;
        !           280: 
        !           281:     switch (addr) {
        !           282:     case MENELAUS_REV:
        !           283:         return 0x22;
        !           284: 
        !           285:     case MENELAUS_VCORE_CTRL5: reg ++;
        !           286:     case MENELAUS_VCORE_CTRL4: reg ++;
        !           287:     case MENELAUS_VCORE_CTRL3: reg ++;
        !           288:     case MENELAUS_VCORE_CTRL2: reg ++;
        !           289:     case MENELAUS_VCORE_CTRL1:
        !           290:         return s->vcore[reg];
        !           291: 
        !           292:     case MENELAUS_DCDC_CTRL3: reg ++;
        !           293:     case MENELAUS_DCDC_CTRL2: reg ++;
        !           294:     case MENELAUS_DCDC_CTRL1:
        !           295:         return s->dcdc[reg];
        !           296: 
        !           297:     case MENELAUS_LDO_CTRL8: reg ++;
        !           298:     case MENELAUS_LDO_CTRL7: reg ++;
        !           299:     case MENELAUS_LDO_CTRL6: reg ++;
        !           300:     case MENELAUS_LDO_CTRL5: reg ++;
        !           301:     case MENELAUS_LDO_CTRL4: reg ++;
        !           302:     case MENELAUS_LDO_CTRL3: reg ++;
        !           303:     case MENELAUS_LDO_CTRL2: reg ++;
        !           304:     case MENELAUS_LDO_CTRL1:
        !           305:         return s->ldo[reg];
        !           306: 
        !           307:     case MENELAUS_SLEEP_CTRL2: reg ++;
        !           308:     case MENELAUS_SLEEP_CTRL1:
        !           309:         return s->sleep[reg];
        !           310: 
        !           311:     case MENELAUS_DEVICE_OFF:
        !           312:         return 0;
        !           313: 
        !           314:     case MENELAUS_OSC_CTRL:
        !           315:         return s->osc | (1 << 7);                      /* CLK32K_GOOD */
        !           316: 
        !           317:     case MENELAUS_DETECT_CTRL:
        !           318:         return s->detect;
        !           319: 
        !           320:     case MENELAUS_INT_MASK1:
        !           321:         return (s->mask >> 0) & 0xff;
        !           322:     case MENELAUS_INT_MASK2:
        !           323:         return (s->mask >> 8) & 0xff;
        !           324: 
        !           325:     case MENELAUS_INT_STATUS1:
        !           326:         return (s->status >> 0) & 0xff;
        !           327:     case MENELAUS_INT_STATUS2:
        !           328:         return (s->status >> 8) & 0xff;
        !           329: 
        !           330:     case MENELAUS_INT_ACK1:
        !           331:     case MENELAUS_INT_ACK2:
        !           332:         return 0;
        !           333: 
        !           334:     case MENELAUS_GPIO_CTRL:
        !           335:         return s->dir;
        !           336:     case MENELAUS_GPIO_IN:
        !           337:         return s->inputs | (~s->dir & s->outputs);
        !           338:     case MENELAUS_GPIO_OUT:
        !           339:         return s->outputs;
        !           340: 
        !           341:     case MENELAUS_BBSMS:
        !           342:         return s->bbsms;
        !           343: 
        !           344:     case MENELAUS_RTC_CTRL:
        !           345:         return s->rtc.ctrl;
        !           346:     case MENELAUS_RTC_UPDATE:
        !           347:         return 0x00;
        !           348:     case MENELAUS_RTC_SEC:
        !           349:         menelaus_rtc_update(s);
        !           350:         return to_bcd(s->rtc.tm.tm_sec);
        !           351:     case MENELAUS_RTC_MIN:
        !           352:         menelaus_rtc_update(s);
        !           353:         return to_bcd(s->rtc.tm.tm_min);
        !           354:     case MENELAUS_RTC_HR:
        !           355:         menelaus_rtc_update(s);
        !           356:         if ((s->rtc.ctrl >> 2) & 1)                    /* MODE12_n24 */
        !           357:             return to_bcd((s->rtc.tm.tm_hour % 12) + 1) |
        !           358:                     (!!(s->rtc.tm.tm_hour >= 12) << 7);        /* PM_nAM */
        !           359:         else
        !           360:             return to_bcd(s->rtc.tm.tm_hour);
        !           361:     case MENELAUS_RTC_DAY:
        !           362:         menelaus_rtc_update(s);
        !           363:         return to_bcd(s->rtc.tm.tm_mday);
        !           364:     case MENELAUS_RTC_MON:
        !           365:         menelaus_rtc_update(s);
        !           366:         return to_bcd(s->rtc.tm.tm_mon + 1);
        !           367:     case MENELAUS_RTC_YR:
        !           368:         menelaus_rtc_update(s);
        !           369:         return to_bcd(s->rtc.tm.tm_year - 2000);
        !           370:     case MENELAUS_RTC_WKDAY:
        !           371:         menelaus_rtc_update(s);
        !           372:         return to_bcd(s->rtc.tm.tm_wday);
        !           373:     case MENELAUS_RTC_AL_SEC:
        !           374:         return to_bcd(s->rtc.alm.tm_sec);
        !           375:     case MENELAUS_RTC_AL_MIN:
        !           376:         return to_bcd(s->rtc.alm.tm_min);
        !           377:     case MENELAUS_RTC_AL_HR:
        !           378:         if ((s->rtc.ctrl >> 2) & 1)                    /* MODE12_n24 */
        !           379:             return to_bcd((s->rtc.alm.tm_hour % 12) + 1) |
        !           380:                     (!!(s->rtc.alm.tm_hour >= 12) << 7);/* AL_PM_nAM */
        !           381:         else
        !           382:             return to_bcd(s->rtc.alm.tm_hour);
        !           383:     case MENELAUS_RTC_AL_DAY:
        !           384:         return to_bcd(s->rtc.alm.tm_mday);
        !           385:     case MENELAUS_RTC_AL_MON:
        !           386:         return to_bcd(s->rtc.alm.tm_mon + 1);
        !           387:     case MENELAUS_RTC_AL_YR:
        !           388:         return to_bcd(s->rtc.alm.tm_year - 2000);
        !           389:     case MENELAUS_RTC_COMP_MSB:
        !           390:         return (s->rtc.comp >> 8) & 0xff;
        !           391:     case MENELAUS_RTC_COMP_LSB:
        !           392:         return (s->rtc.comp >> 0) & 0xff;
        !           393: 
        !           394:     case MENELAUS_S1_PULL_EN:
        !           395:         return s->pull[0];
        !           396:     case MENELAUS_S1_PULL_DIR:
        !           397:         return s->pull[1];
        !           398:     case MENELAUS_S2_PULL_EN:
        !           399:         return s->pull[2];
        !           400:     case MENELAUS_S2_PULL_DIR:
        !           401:         return s->pull[3];
        !           402: 
        !           403:     case MENELAUS_MCT_CTRL3: reg ++;
        !           404:     case MENELAUS_MCT_CTRL2: reg ++;
        !           405:     case MENELAUS_MCT_CTRL1:
        !           406:         return s->mmc_ctrl[reg];
        !           407:     case MENELAUS_MCT_PIN_ST:
        !           408:         /* TODO: return the real Card Detect */
        !           409:         return 0;
        !           410:     case MENELAUS_DEBOUNCE1:
        !           411:         return s->mmc_debounce;
        !           412: 
        !           413:     default:
        !           414: #ifdef VERBOSE
        !           415:         printf("%s: unknown register %02x\n", __FUNCTION__, addr);
        !           416: #endif
        !           417:         break;
        !           418:     }
        !           419:     return 0;
        !           420: }
        !           421: 
        !           422: static void menelaus_write(void *opaque, uint8_t addr, uint8_t value)
        !           423: {
        !           424:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           425:     int line;
        !           426:     int reg = 0;
        !           427:     struct tm tm;
        !           428: 
        !           429:     switch (addr) {
        !           430:     case MENELAUS_VCORE_CTRL1:
        !           431:         s->vcore[0] = (value & 0xe) | MIN(value & 0x1f, 0x12);
        !           432:         break;
        !           433:     case MENELAUS_VCORE_CTRL2:
        !           434:         s->vcore[1] = value;
        !           435:         break;
        !           436:     case MENELAUS_VCORE_CTRL3:
        !           437:         s->vcore[2] = MIN(value & 0x1f, 0x12);
        !           438:         break;
        !           439:     case MENELAUS_VCORE_CTRL4:
        !           440:         s->vcore[3] = MIN(value & 0x1f, 0x12);
        !           441:         break;
        !           442:     case MENELAUS_VCORE_CTRL5:
        !           443:         s->vcore[4] = value & 3;
        !           444:         /* XXX
        !           445:          * auto set to 3 on M_Active, nRESWARM
        !           446:          * auto set to 0 on M_WaitOn, M_Backup
        !           447:          */
        !           448:         break;
        !           449: 
        !           450:     case MENELAUS_DCDC_CTRL1:
        !           451:         s->dcdc[0] = value & 0x3f;
        !           452:         break;
        !           453:     case MENELAUS_DCDC_CTRL2:
        !           454:         s->dcdc[1] = value & 0x07;
        !           455:         /* XXX
        !           456:          * auto set to 3 on M_Active, nRESWARM
        !           457:          * auto set to 0 on M_WaitOn, M_Backup
        !           458:          */
        !           459:         break;
        !           460:     case MENELAUS_DCDC_CTRL3:
        !           461:         s->dcdc[2] = value & 0x07;
        !           462:         break;
        !           463: 
        !           464:     case MENELAUS_LDO_CTRL1:
        !           465:         s->ldo[0] = value;
        !           466:         break;
        !           467:     case MENELAUS_LDO_CTRL2:
        !           468:         s->ldo[1] = value & 0x7f;
        !           469:         /* XXX
        !           470:          * auto set to 0x7e on M_WaitOn, M_Backup
        !           471:          */
        !           472:         break;
        !           473:     case MENELAUS_LDO_CTRL3:
        !           474:         s->ldo[2] = value & 3;
        !           475:         /* XXX
        !           476:          * auto set to 3 on M_Active, nRESWARM
        !           477:          * auto set to 0 on M_WaitOn, M_Backup
        !           478:          */
        !           479:         break;
        !           480:     case MENELAUS_LDO_CTRL4:
        !           481:         s->ldo[3] = value & 3;
        !           482:         /* XXX
        !           483:          * auto set to 3 on M_Active, nRESWARM
        !           484:          * auto set to 0 on M_WaitOn, M_Backup
        !           485:          */
        !           486:         break;
        !           487:     case MENELAUS_LDO_CTRL5:
        !           488:         s->ldo[4] = value & 3;
        !           489:         /* XXX
        !           490:          * auto set to 3 on M_Active, nRESWARM
        !           491:          * auto set to 0 on M_WaitOn, M_Backup
        !           492:          */
        !           493:         break;
        !           494:     case MENELAUS_LDO_CTRL6:
        !           495:         s->ldo[5] = value & 3;
        !           496:         break;
        !           497:     case MENELAUS_LDO_CTRL7:
        !           498:         s->ldo[6] = value & 3;
        !           499:         break;
        !           500:     case MENELAUS_LDO_CTRL8:
        !           501:         s->ldo[7] = value & 3;
        !           502:         break;
        !           503: 
        !           504:     case MENELAUS_SLEEP_CTRL2: reg ++;
        !           505:     case MENELAUS_SLEEP_CTRL1:
        !           506:         s->sleep[reg] = value;
        !           507:         break;
        !           508: 
        !           509:     case MENELAUS_DEVICE_OFF:
        !           510:         if (value & 1)
        !           511:             menelaus_reset(&s->i2c);
        !           512:         break;
        !           513: 
        !           514:     case MENELAUS_OSC_CTRL:
        !           515:         s->osc = value & 7;
        !           516:         break;
        !           517: 
        !           518:     case MENELAUS_DETECT_CTRL:
        !           519:         s->detect = value & 0x7f;
        !           520:         break;
        !           521: 
        !           522:     case MENELAUS_INT_MASK1:
        !           523:         s->mask &= 0xf00;
        !           524:         s->mask |= value << 0;
        !           525:         menelaus_update(s);
        !           526:         break;
        !           527:     case MENELAUS_INT_MASK2:
        !           528:         s->mask &= 0x0ff;
        !           529:         s->mask |= value << 8;
        !           530:         menelaus_update(s);
        !           531:         break;
        !           532: 
        !           533:     case MENELAUS_INT_ACK1:
        !           534:         s->status &= ~(((uint16_t) value) << 0);
        !           535:         menelaus_update(s);
        !           536:         break;
        !           537:     case MENELAUS_INT_ACK2:
        !           538:         s->status &= ~(((uint16_t) value) << 8);
        !           539:         menelaus_update(s);
        !           540:         break;
        !           541: 
        !           542:     case MENELAUS_GPIO_CTRL:
        !           543:         for (line = 0; line < 3; line ++)
        !           544:             if (((s->dir ^ value) >> line) & 1)
        !           545:                 if (s->handler[line])
        !           546:                     qemu_set_irq(s->handler[line],
        !           547:                                     ((s->outputs & ~s->dir) >> line) & 1);
        !           548:         s->dir = value & 0x67;
        !           549:         break;
        !           550:     case MENELAUS_GPIO_OUT:
        !           551:         for (line = 0; line < 3; line ++)
        !           552:             if ((((s->outputs ^ value) & ~s->dir) >> line) & 1)
        !           553:                 if (s->handler[line])
        !           554:                     qemu_set_irq(s->handler[line], (s->outputs >> line) & 1);
        !           555:         s->outputs = value & 0x07;
        !           556:         break;
        !           557: 
        !           558:     case MENELAUS_BBSMS:
        !           559:         s->bbsms = 0x0d;
        !           560:         break;
        !           561: 
        !           562:     case MENELAUS_RTC_CTRL:
        !           563:         if ((s->rtc.ctrl ^ value) & 1) {                       /* RTC_EN */
        !           564:             if (value & 1)
        !           565:                 menelaus_rtc_start(s);
        !           566:             else
        !           567:                 menelaus_rtc_stop(s);
        !           568:         }
        !           569:         s->rtc.ctrl = value & 0x1f;
        !           570:         menelaus_alm_update(s);
        !           571:         break;
        !           572:     case MENELAUS_RTC_UPDATE:
        !           573:         menelaus_rtc_update(s);
        !           574:         memcpy(&tm, &s->rtc.tm, sizeof(tm));
        !           575:         switch (value & 0xf) {
        !           576:         case 0:
        !           577:             break;
        !           578:         case 1:
        !           579:             tm.tm_sec = s->rtc.new.tm_sec;
        !           580:             break;
        !           581:         case 2:
        !           582:             tm.tm_min = s->rtc.new.tm_min;
        !           583:             break;
        !           584:         case 3:
        !           585:             if (s->rtc.new.tm_hour > 23)
        !           586:                 goto rtc_badness;
        !           587:             tm.tm_hour = s->rtc.new.tm_hour;
        !           588:             break;
        !           589:         case 4:
        !           590:             if (s->rtc.new.tm_mday < 1)
        !           591:                 goto rtc_badness;
        !           592:             /* TODO check range */
        !           593:             tm.tm_mday = s->rtc.new.tm_mday;
        !           594:             break;
        !           595:         case 5:
        !           596:             if (s->rtc.new.tm_mon < 0 || s->rtc.new.tm_mon > 11)
        !           597:                 goto rtc_badness;
        !           598:             tm.tm_mon = s->rtc.new.tm_mon;
        !           599:             break;
        !           600:         case 6:
        !           601:             tm.tm_year = s->rtc.new.tm_year;
        !           602:             break;
        !           603:         case 7:
        !           604:             /* TODO set .tm_mday instead */
        !           605:             tm.tm_wday = s->rtc.new.tm_wday;
        !           606:             break;
        !           607:         case 8:
        !           608:             if (s->rtc.new.tm_hour > 23)
        !           609:                 goto rtc_badness;
        !           610:             if (s->rtc.new.tm_mday < 1)
        !           611:                 goto rtc_badness;
        !           612:             if (s->rtc.new.tm_mon < 0 || s->rtc.new.tm_mon > 11)
        !           613:                 goto rtc_badness;
        !           614:             tm.tm_sec = s->rtc.new.tm_sec;
        !           615:             tm.tm_min = s->rtc.new.tm_min;
        !           616:             tm.tm_hour = s->rtc.new.tm_hour;
        !           617:             tm.tm_mday = s->rtc.new.tm_mday;
        !           618:             tm.tm_mon = s->rtc.new.tm_mon;
        !           619:             tm.tm_year = s->rtc.new.tm_year;
        !           620:             break;
        !           621:         rtc_badness:
        !           622:         default:
        !           623:             fprintf(stderr, "%s: bad RTC_UPDATE value %02x\n",
        !           624:                             __FUNCTION__, value);
        !           625:             s->status |= 1 << 10;                              /* RTCERR */
        !           626:             menelaus_update(s);
        !           627:         }
        !           628:         s->rtc.sec_offset = qemu_timedate_diff(&tm);
        !           629:         break;
        !           630:     case MENELAUS_RTC_SEC:
        !           631:         s->rtc.tm.tm_sec = from_bcd(value & 0x7f);
        !           632:         break;
        !           633:     case MENELAUS_RTC_MIN:
        !           634:         s->rtc.tm.tm_min = from_bcd(value & 0x7f);
        !           635:         break;
        !           636:     case MENELAUS_RTC_HR:
        !           637:         s->rtc.tm.tm_hour = (s->rtc.ctrl & (1 << 2)) ? /* MODE12_n24 */
        !           638:                 MIN(from_bcd(value & 0x3f), 12) + ((value >> 7) ? 11 : -1) :
        !           639:                 from_bcd(value & 0x3f);
        !           640:         break;
        !           641:     case MENELAUS_RTC_DAY:
        !           642:         s->rtc.tm.tm_mday = from_bcd(value);
        !           643:         break;
        !           644:     case MENELAUS_RTC_MON:
        !           645:         s->rtc.tm.tm_mon = MAX(1, from_bcd(value)) - 1;
        !           646:         break;
        !           647:     case MENELAUS_RTC_YR:
        !           648:         s->rtc.tm.tm_year = 2000 + from_bcd(value);
        !           649:         break;
        !           650:     case MENELAUS_RTC_WKDAY:
        !           651:         s->rtc.tm.tm_mday = from_bcd(value);
        !           652:         break;
        !           653:     case MENELAUS_RTC_AL_SEC:
        !           654:         s->rtc.alm.tm_sec = from_bcd(value & 0x7f);
        !           655:         menelaus_alm_update(s);
        !           656:         break;
        !           657:     case MENELAUS_RTC_AL_MIN:
        !           658:         s->rtc.alm.tm_min = from_bcd(value & 0x7f);
        !           659:         menelaus_alm_update(s);
        !           660:         break;
        !           661:     case MENELAUS_RTC_AL_HR:
        !           662:         s->rtc.alm.tm_hour = (s->rtc.ctrl & (1 << 2)) ?        /* MODE12_n24 */
        !           663:                 MIN(from_bcd(value & 0x3f), 12) + ((value >> 7) ? 11 : -1) :
        !           664:                 from_bcd(value & 0x3f);
        !           665:         menelaus_alm_update(s);
        !           666:         break;
        !           667:     case MENELAUS_RTC_AL_DAY:
        !           668:         s->rtc.alm.tm_mday = from_bcd(value);
        !           669:         menelaus_alm_update(s);
        !           670:         break;
        !           671:     case MENELAUS_RTC_AL_MON:
        !           672:         s->rtc.alm.tm_mon = MAX(1, from_bcd(value)) - 1;
        !           673:         menelaus_alm_update(s);
        !           674:         break;
        !           675:     case MENELAUS_RTC_AL_YR:
        !           676:         s->rtc.alm.tm_year = 2000 + from_bcd(value);
        !           677:         menelaus_alm_update(s);
        !           678:         break;
        !           679:     case MENELAUS_RTC_COMP_MSB:
        !           680:         s->rtc.comp &= 0xff;
        !           681:         s->rtc.comp |= value << 8;
        !           682:         break;
        !           683:     case MENELAUS_RTC_COMP_LSB:
        !           684:         s->rtc.comp &= 0xff << 8;
        !           685:         s->rtc.comp |= value;
        !           686:         break;
        !           687: 
        !           688:     case MENELAUS_S1_PULL_EN:
        !           689:         s->pull[0] = value;
        !           690:         break;
        !           691:     case MENELAUS_S1_PULL_DIR:
        !           692:         s->pull[1] = value & 0x1f;
        !           693:         break;
        !           694:     case MENELAUS_S2_PULL_EN:
        !           695:         s->pull[2] = value;
        !           696:         break;
        !           697:     case MENELAUS_S2_PULL_DIR:
        !           698:         s->pull[3] = value & 0x1f;
        !           699:         break;
        !           700: 
        !           701:     case MENELAUS_MCT_CTRL1:
        !           702:         s->mmc_ctrl[0] = value & 0x7f;
        !           703:         break;
        !           704:     case MENELAUS_MCT_CTRL2:
        !           705:         s->mmc_ctrl[1] = value;
        !           706:         /* TODO update Card Detect interrupts */
        !           707:         break;
        !           708:     case MENELAUS_MCT_CTRL3:
        !           709:         s->mmc_ctrl[2] = value & 0xf;
        !           710:         break;
        !           711:     case MENELAUS_DEBOUNCE1:
        !           712:         s->mmc_debounce = value & 0x3f;
        !           713:         break;
        !           714: 
        !           715:     default:
        !           716: #ifdef VERBOSE
        !           717:         printf("%s: unknown register %02x\n", __FUNCTION__, addr);
        !           718: #endif
        !           719:     }
        !           720: }
        !           721: 
        !           722: static void menelaus_event(i2c_slave *i2c, enum i2c_event event)
        !           723: {
        !           724:     struct menelaus_s *s = (struct menelaus_s *) i2c;
        !           725: 
        !           726:     if (event == I2C_START_SEND)
        !           727:         s->firstbyte = 1;
        !           728: }
        !           729: 
        !           730: static int menelaus_tx(i2c_slave *i2c, uint8_t data)
        !           731: {
        !           732:     struct menelaus_s *s = (struct menelaus_s *) i2c;
        !           733:     /* Interpret register address byte */
        !           734:     if (s->firstbyte) {
        !           735:         s->reg = data;
        !           736:         s->firstbyte = 0;
        !           737:     } else
        !           738:         menelaus_write(s, s->reg ++, data);
        !           739: 
        !           740:     return 0;
        !           741: }
        !           742: 
        !           743: static int menelaus_rx(i2c_slave *i2c)
        !           744: {
        !           745:     struct menelaus_s *s = (struct menelaus_s *) i2c;
        !           746: 
        !           747:     return menelaus_read(s, s->reg ++);
        !           748: }
        !           749: 
        !           750: static void tm_put(QEMUFile *f, struct tm *tm) {
        !           751:     qemu_put_be16(f, tm->tm_sec);
        !           752:     qemu_put_be16(f, tm->tm_min);
        !           753:     qemu_put_be16(f, tm->tm_hour);
        !           754:     qemu_put_be16(f, tm->tm_mday);
        !           755:     qemu_put_be16(f, tm->tm_min);
        !           756:     qemu_put_be16(f, tm->tm_year);
        !           757: }
        !           758: 
        !           759: static void tm_get(QEMUFile *f, struct tm *tm) {
        !           760:     tm->tm_sec = qemu_get_be16(f);
        !           761:     tm->tm_min = qemu_get_be16(f);
        !           762:     tm->tm_hour = qemu_get_be16(f);
        !           763:     tm->tm_mday = qemu_get_be16(f);
        !           764:     tm->tm_min = qemu_get_be16(f);
        !           765:     tm->tm_year = qemu_get_be16(f);
        !           766: }
        !           767: 
        !           768: static void menelaus_save(QEMUFile *f, void *opaque)
        !           769: {
        !           770:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           771: 
        !           772:     qemu_put_be32(f, s->firstbyte);
        !           773:     qemu_put_8s(f, &s->reg);
        !           774: 
        !           775:     qemu_put_8s(f, &s->vcore[0]);
        !           776:     qemu_put_8s(f, &s->vcore[1]);
        !           777:     qemu_put_8s(f, &s->vcore[2]);
        !           778:     qemu_put_8s(f, &s->vcore[3]);
        !           779:     qemu_put_8s(f, &s->vcore[4]);
        !           780:     qemu_put_8s(f, &s->dcdc[3]);
        !           781:     qemu_put_8s(f, &s->dcdc[3]);
        !           782:     qemu_put_8s(f, &s->dcdc[3]);
        !           783:     qemu_put_8s(f, &s->ldo[0]);
        !           784:     qemu_put_8s(f, &s->ldo[1]);
        !           785:     qemu_put_8s(f, &s->ldo[2]);
        !           786:     qemu_put_8s(f, &s->ldo[3]);
        !           787:     qemu_put_8s(f, &s->ldo[4]);
        !           788:     qemu_put_8s(f, &s->ldo[5]);
        !           789:     qemu_put_8s(f, &s->ldo[6]);
        !           790:     qemu_put_8s(f, &s->ldo[7]);
        !           791:     qemu_put_8s(f, &s->sleep[0]);
        !           792:     qemu_put_8s(f, &s->sleep[1]);
        !           793:     qemu_put_8s(f, &s->osc);
        !           794:     qemu_put_8s(f, &s->detect);
        !           795:     qemu_put_be16s(f, &s->mask);
        !           796:     qemu_put_be16s(f, &s->status);
        !           797:     qemu_put_8s(f, &s->dir);
        !           798:     qemu_put_8s(f, &s->inputs);
        !           799:     qemu_put_8s(f, &s->outputs);
        !           800:     qemu_put_8s(f, &s->bbsms);
        !           801:     qemu_put_8s(f, &s->pull[0]);
        !           802:     qemu_put_8s(f, &s->pull[1]);
        !           803:     qemu_put_8s(f, &s->pull[2]);
        !           804:     qemu_put_8s(f, &s->pull[3]);
        !           805:     qemu_put_8s(f, &s->mmc_ctrl[0]);
        !           806:     qemu_put_8s(f, &s->mmc_ctrl[1]);
        !           807:     qemu_put_8s(f, &s->mmc_ctrl[2]);
        !           808:     qemu_put_8s(f, &s->mmc_debounce);
        !           809:     qemu_put_8s(f, &s->rtc.ctrl);
        !           810:     qemu_put_be16s(f, &s->rtc.comp);
        !           811:     /* Should be <= 1000 */
        !           812:     qemu_put_be16(f, s->rtc.next - qemu_get_clock(rt_clock));
        !           813:     tm_put(f, &s->rtc.new);
        !           814:     tm_put(f, &s->rtc.alm);
        !           815:     qemu_put_byte(f, s->pwrbtn_state);
        !           816: 
        !           817:     i2c_slave_save(f, &s->i2c);
        !           818: }
        !           819: 
        !           820: static int menelaus_load(QEMUFile *f, void *opaque, int version_id)
        !           821: {
        !           822:     struct menelaus_s *s = (struct menelaus_s *) opaque;
        !           823: 
        !           824:     s->firstbyte = qemu_get_be32(f);
        !           825:     qemu_get_8s(f, &s->reg);
        !           826: 
        !           827:     if (s->rtc.ctrl & 1)                                       /* RTC_EN */
        !           828:         menelaus_rtc_stop(s);
        !           829:     qemu_get_8s(f, &s->vcore[0]);
        !           830:     qemu_get_8s(f, &s->vcore[1]);
        !           831:     qemu_get_8s(f, &s->vcore[2]);
        !           832:     qemu_get_8s(f, &s->vcore[3]);
        !           833:     qemu_get_8s(f, &s->vcore[4]);
        !           834:     qemu_get_8s(f, &s->dcdc[3]);
        !           835:     qemu_get_8s(f, &s->dcdc[3]);
        !           836:     qemu_get_8s(f, &s->dcdc[3]);
        !           837:     qemu_get_8s(f, &s->ldo[0]);
        !           838:     qemu_get_8s(f, &s->ldo[1]);
        !           839:     qemu_get_8s(f, &s->ldo[2]);
        !           840:     qemu_get_8s(f, &s->ldo[3]);
        !           841:     qemu_get_8s(f, &s->ldo[4]);
        !           842:     qemu_get_8s(f, &s->ldo[5]);
        !           843:     qemu_get_8s(f, &s->ldo[6]);
        !           844:     qemu_get_8s(f, &s->ldo[7]);
        !           845:     qemu_get_8s(f, &s->sleep[0]);
        !           846:     qemu_get_8s(f, &s->sleep[1]);
        !           847:     qemu_get_8s(f, &s->osc);
        !           848:     qemu_get_8s(f, &s->detect);
        !           849:     qemu_get_be16s(f, &s->mask);
        !           850:     qemu_get_be16s(f, &s->status);
        !           851:     qemu_get_8s(f, &s->dir);
        !           852:     qemu_get_8s(f, &s->inputs);
        !           853:     qemu_get_8s(f, &s->outputs);
        !           854:     qemu_get_8s(f, &s->bbsms);
        !           855:     qemu_get_8s(f, &s->pull[0]);
        !           856:     qemu_get_8s(f, &s->pull[1]);
        !           857:     qemu_get_8s(f, &s->pull[2]);
        !           858:     qemu_get_8s(f, &s->pull[3]);
        !           859:     qemu_get_8s(f, &s->mmc_ctrl[0]);
        !           860:     qemu_get_8s(f, &s->mmc_ctrl[1]);
        !           861:     qemu_get_8s(f, &s->mmc_ctrl[2]);
        !           862:     qemu_get_8s(f, &s->mmc_debounce);
        !           863:     qemu_get_8s(f, &s->rtc.ctrl);
        !           864:     qemu_get_be16s(f, &s->rtc.comp);
        !           865:     s->rtc.next = qemu_get_be16(f);
        !           866:     tm_get(f, &s->rtc.new);
        !           867:     tm_get(f, &s->rtc.alm);
        !           868:     s->pwrbtn_state = qemu_get_byte(f);
        !           869:     menelaus_alm_update(s);
        !           870:     menelaus_update(s);
        !           871:     if (s->rtc.ctrl & 1)                                       /* RTC_EN */
        !           872:         menelaus_rtc_start(s);
        !           873: 
        !           874:     i2c_slave_load(f, &s->i2c);
        !           875:     return 0;
        !           876: }
        !           877: 
        !           878: i2c_slave *twl92230_init(i2c_bus *bus, qemu_irq irq)
        !           879: {
        !           880:     struct menelaus_s *s = (struct menelaus_s *)
        !           881:             i2c_slave_init(bus, 0, sizeof(struct menelaus_s));
        !           882: 
        !           883:     s->i2c.event = menelaus_event;
        !           884:     s->i2c.recv = menelaus_rx;
        !           885:     s->i2c.send = menelaus_tx;
        !           886: 
        !           887:     s->irq = irq;
        !           888:     s->rtc.hz_tm = qemu_new_timer(rt_clock, menelaus_rtc_hz, s);
        !           889:     s->in = qemu_allocate_irqs(menelaus_gpio_set, s, 3);
        !           890:     s->pwrbtn = qemu_allocate_irqs(menelaus_pwrbtn_set, s, 1)[0];
        !           891: 
        !           892:     menelaus_reset(&s->i2c);
        !           893: 
        !           894:     register_savevm("menelaus", -1, 0, menelaus_save, menelaus_load, s);
        !           895: 
        !           896:     return &s->i2c;
        !           897: }
        !           898: 
        !           899: qemu_irq *twl92230_gpio_in_get(i2c_slave *i2c)
        !           900: {
        !           901:     struct menelaus_s *s = (struct menelaus_s *) i2c;
        !           902: 
        !           903:     return s->in;
        !           904: }
        !           905: 
        !           906: void twl92230_gpio_out_set(i2c_slave *i2c, int line, qemu_irq handler)
        !           907: {
        !           908:     struct menelaus_s *s = (struct menelaus_s *) i2c;
        !           909: 
        !           910:     if (line >= 3 || line < 0) {
        !           911:         fprintf(stderr, "%s: No GPO line %i\n", __FUNCTION__, line);
        !           912:         exit(-1);
        !           913:     }
        !           914:     s->handler[line] = handler;
        !           915: }

unix.superglobalmegacorp.com

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.