Return to io.c CVS log

Up to [Qemu by Fabrice Bellard] / qemu / roms / SLOF / clients / net-snk / app / biosemu

qemu 1.1.1

/******************************************************************************
 * Copyright (c) 2004, 2008 IBM Corporation
 * All rights reserved.
 * This program and the accompanying materials
 * are made available under the terms of the BSD License
 * which accompanies this distribution, and is available at
 * http://www.opensource.org/licenses/bsd-license.php
 *
 * Contributors:
 *     IBM Corporation - initial implementation
 *****************************************************************************/

#include <stdio.h>
#include <cpu.h>
#include <pci.h>
#include "device.h"
#include "rtas.h"
#include "debug.h"
#include "device.h"
#include <stdint.h>
#include <x86emu/x86emu.h>
#include <time.h>


//defined in net-snk/kernel/timer.c
extern uint64_t get_time(void);

// these are not used, only needed for linking,  must be overridden using X86emu_setupPioFuncs
// with the functions and struct below
void
outb(uint8_t val, uint16_t port)
{
	printf("WARNING: outb not implemented!\n");
	HALT_SYS();
}

void
outw(uint16_t val, uint16_t port)
{
	printf("WARNING: outw not implemented!\n");
	HALT_SYS();
}

void
outl(uint32_t val, uint16_t port)
{
	printf("WARNING: outl not implemented!\n");
	HALT_SYS();
}

uint8_t
inb(uint16_t port)
{
	printf("WARNING: inb not implemented!\n");
	HALT_SYS();
	return 0;
}

uint16_t
inw(uint16_t port)
{
	printf("WARNING: inw not implemented!\n");
	HALT_SYS();
	return 0;
}

uint32_t
inl(uint16_t port)
{
	printf("WARNING: inl not implemented!\n");
	HALT_SYS();
	return 0;
}

uint32_t pci_cfg_read(X86EMU_pioAddr addr, uint8_t size);
void pci_cfg_write(X86EMU_pioAddr addr, uint32_t val, uint8_t size);
uint8_t handle_port_61h();

uint8_t
my_inb(X86EMU_pioAddr addr)
{
	uint8_t rval = 0xFF;
	uint64_t translated_addr = addr;
	uint8_t translated = dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x): access to Device I/O\n", __FUNCTION__,
				addr);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __FUNCTION__, addr, translated_addr);
		rval = read_io((void *)translated_addr, 1);
		DEBUG_PRINTF_IO("%s(%04x) Device I/O --> %02x\n", __FUNCTION__,
				addr, rval);
		return rval;
	} else {
		switch (addr) {
		case 0x61:
			//8254 KB Controller / Timer Port
			rval = handle_port_61h();
			//DEBUG_PRINTF_IO("%s(%04x) KB / Timer Port B --> %02x\n", __FUNCTION__, addr, rval);
			return rval;
			break;
		case 0xCFC:
		case 0xCFD:
		case 0xCFE:
		case 0xCFF:
			// PCI Config Mechanism 1 Ports
			return (uint8_t) pci_cfg_read(addr, 1);
			break;
		case 0x0a:
			CHECK_DBG(DEBUG_INTR) {
				X86EMU_trace_on();
			}
			M.x86.debug &= ~DEBUG_DECODE_NOPRINT_F;
			//HALT_SYS();
			// no break, intentional fall-through to default!!
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x) reading from bios_device.io_buffer\n",
			     __FUNCTION__, addr);
			rval = *((uint8_t *) (bios_device.io_buffer + addr));
			DEBUG_PRINTF_IO("%s(%04x) I/O Buffer --> %02x\n",
					__FUNCTION__, addr, rval);
			return rval;
			break;
		}
	}
}

uint16_t
my_inw(X86EMU_pioAddr addr)
{
	uint64_t translated_addr = addr;
	uint8_t translated = dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x): access to Device I/O\n", __FUNCTION__,
				addr);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __FUNCTION__, addr, translated_addr);
		uint16_t rval;
		if ((translated_addr & (uint64_t) 0x1) == 0) {
			// 16 bit aligned access...
			uint16_t tempval = read_io((void *)translated_addr, 2);
			//little endian conversion
			rval = in16le((void *) &tempval);
		} else {
			// unaligned access, read single bytes, little-endian
			rval = (read_io((void *)translated_addr, 1) << 8)
				| (read_io((void *)(translated_addr + 1), 1));
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O --> %04x\n", __FUNCTION__,
				addr, rval);
		return rval;
	} else {
		switch (addr) {
		case 0xCFC:
		case 0xCFE:
			//PCI Config Mechanism 1
			return (uint16_t) pci_cfg_read(addr, 2);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x) reading from bios_device.io_buffer\n",
			     __FUNCTION__, addr);
			uint16_t rval =
			    in16le((void *) bios_device.io_buffer + addr);
			DEBUG_PRINTF_IO("%s(%04x) I/O Buffer --> %04x\n",
					__FUNCTION__, addr, rval);
			return rval;
			break;
		}
	}
}

uint32_t
my_inl(X86EMU_pioAddr addr)
{
	uint64_t translated_addr = addr;
	uint8_t translated = dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x): access to Device I/O\n", __FUNCTION__,
				addr);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __FUNCTION__, addr, translated_addr);
		uint32_t rval;
		if ((translated_addr & (uint64_t) 0x3) == 0) {
			// 32 bit aligned access...
			uint32_t tempval = read_io((void *) translated_addr, 4);
			//little endian conversion
			rval = in32le((void *) &tempval);
		} else {
			// unaligned access, read single bytes, little-endian
			rval = (read_io((void *)(translated_addr), 1) << 24)
				| (read_io((void *)(translated_addr + 1), 1) << 16)
				| (read_io((void *)(translated_addr + 2), 1) << 8)
				| (read_io((void *)(translated_addr + 3), 1));
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O --> %08x\n", __FUNCTION__,
				addr, rval);
		return rval;
	} else {
		switch (addr) {
		case 0xCFC:
			//PCI Config Mechanism 1
			return pci_cfg_read(addr, 4);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x) reading from bios_device.io_buffer\n",
			     __FUNCTION__, addr);
			uint32_t rval =
			    in32le((void *) bios_device.io_buffer + addr);
			DEBUG_PRINTF_IO("%s(%04x) I/O Buffer --> %08x\n",
					__FUNCTION__, addr, rval);
			return rval;
			break;
		}
	}
}

void
my_outb(X86EMU_pioAddr addr, uint8_t val)
{
	uint64_t translated_addr = addr;
	uint8_t translated = dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x, %x): access to Device I/O\n",
				__FUNCTION__, addr, val);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __FUNCTION__, addr, translated_addr);
		write_io((void *) translated_addr, val, 1);
		DEBUG_PRINTF_IO("%s(%04x) Device I/O <-- %02x\n", __FUNCTION__,
				addr, val);
	} else {
		switch (addr) {
		case 0xCFC:
		case 0xCFD:
		case 0xCFE:
		case 0xCFF:
			// PCI Config Mechanism 1 Ports
			pci_cfg_write(addr, val, 1);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x,%02x) writing to bios_device.io_buffer\n",
			     __FUNCTION__, addr, val);
			*((uint8_t *) (bios_device.io_buffer + addr)) = val;
			break;
		}
	}
}

void
my_outw(X86EMU_pioAddr addr, uint16_t val)
{
	uint64_t translated_addr = addr;
	uint8_t translated = dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x, %x): access to Device I/O\n",
				__FUNCTION__, addr, val);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __FUNCTION__, addr, translated_addr);
		if ((translated_addr & (uint64_t) 0x1) == 0) {
			// little-endian conversion
			uint16_t tempval = in16le((void *) &val);
			// 16 bit aligned access...
			write_io((void *) translated_addr, tempval, 2);
		} else {
			// unaligned access, write single bytes, little-endian
			write_io(((void *) (translated_addr + 1)),
				(uint8_t) ((val & 0xFF00) >> 8), 1);
			write_io(((void *) translated_addr),
				(uint8_t) (val & 0x00FF), 1);
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O <-- %04x\n", __FUNCTION__,
				addr, val);
	} else {
		switch (addr) {
		case 0xCFC:
		case 0xCFE:
			// PCI Config Mechanism 1 Ports
			pci_cfg_write(addr, val, 2);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x,%04x) writing to bios_device.io_buffer\n",
			     __FUNCTION__, addr, val);
			out16le((void *) bios_device.io_buffer + addr, val);
			break;
		}
	}
}

void
my_outl(X86EMU_pioAddr addr, uint32_t val)
{
	uint64_t translated_addr = addr;
	uint8_t translated = dev_translate_address(&translated_addr);
	if (translated != 0) {
		//translation successfull, access Device I/O (BAR or Legacy...)
		DEBUG_PRINTF_IO("%s(%x, %x): access to Device I/O\n",
				__FUNCTION__, addr, val);
		//DEBUG_PRINTF_IO("%s(%04x): translated_addr: %llx\n", __FUNCTION__, addr, translated_addr);
		if ((translated_addr & (uint64_t) 0x3) == 0) {
			// little-endian conversion
			uint32_t tempval = in32le((void *) &val);
			// 32 bit aligned access...
			write_io((void *) translated_addr,  tempval, 4);
		} else {
			// unaligned access, write single bytes, little-endian
			write_io(((void *) translated_addr + 3),
			    (uint8_t) ((val & 0xFF000000) >> 24), 1);
			write_io(((void *) translated_addr + 2),
			    (uint8_t) ((val & 0x00FF0000) >> 16), 1);
			write_io(((void *) translated_addr + 1),
			    (uint8_t) ((val & 0x0000FF00) >> 8), 1);
			write_io(((void *) translated_addr),
			    (uint8_t) (val & 0x000000FF), 1);
		}
		DEBUG_PRINTF_IO("%s(%04x) Device I/O <-- %08x\n", __FUNCTION__,
				addr, val);
	} else {
		switch (addr) {
		case 0xCFC:
			// PCI Config Mechanism 1 Ports
			pci_cfg_write(addr, val, 4);
			break;
		default:
			DEBUG_PRINTF_IO
			    ("%s(%04x,%08x) writing to bios_device.io_buffer\n",
			     __FUNCTION__, addr, val);
			out32le((void *) bios_device.io_buffer + addr, val);
			break;
		}
	}
}

uint32_t
pci_cfg_read(X86EMU_pioAddr addr, uint8_t size)
{
	uint32_t rval = 0xFFFFFFFF;
	if ((addr >= 0xCFC) && ((addr + size) <= 0xCFF)) {
		// PCI Configuration Mechanism 1 step 1
		// write to 0xCF8, sets bus, device, function and Config Space offset
		// later read from 0xCFC-0xCFF returns the value...
		uint8_t bus, devfn, offs;
		uint32_t port_cf8_val = my_inl(0xCF8);
		if ((port_cf8_val & 0x80000000) != 0) {
			//highest bit enables config space mapping
			bus = (port_cf8_val & 0x00FF0000) >> 16;
			devfn = (port_cf8_val & 0x0000FF00) >> 8;
			offs = (port_cf8_val & 0x000000FF);
			offs += (addr - 0xCFC);	// if addr is not 0xcfc, the offset is moved accordingly
			if ((bus != bios_device.bus)
			    || (devfn != bios_device.devfn)) {
				// fail accesses to any device but ours...
				printf
				    ("Config access invalid! bus: %x, devfn: %x, offs: %x\n",
				     bus, devfn, offs);
				HALT_SYS();
			} else {
				rval =
				    (uint32_t) rtas_pci_config_read(bios_device.
								    puid, size,
								    bus, devfn,
								    offs);
				DEBUG_PRINTF_IO
				    ("%s(%04x) PCI Config Read @%02x, size: %d --> 0x%08x\n",
				     __FUNCTION__, addr, offs, size, rval);
			}
		}
	}
	return rval;
}

void
pci_cfg_write(X86EMU_pioAddr addr, uint32_t val, uint8_t size)
{
	if ((addr >= 0xCFC) && ((addr + size) <= 0xCFF)) {
		// PCI Configuration Mechanism 1 step 1
		// write to 0xCF8, sets bus, device, function and Config Space offset
		// later write to 0xCFC-0xCFF sets the value...
		uint8_t bus, devfn, offs;
		uint32_t port_cf8_val = my_inl(0xCF8);
		if ((port_cf8_val & 0x80000000) != 0) {
			//highest bit enables config space mapping
			bus = (port_cf8_val & 0x00FF0000) >> 16;
			devfn = (port_cf8_val & 0x0000FF00) >> 8;
			offs = (port_cf8_val & 0x000000FF);
			offs += (addr - 0xCFC);	// if addr is not 0xcfc, the offset is moved accordingly
			if ((bus != bios_device.bus)
			    || (devfn != bios_device.devfn)) {
				// fail accesses to any device but ours...
				printf
				    ("Config access invalid! bus: %x, devfn: %x, offs: %x\n",
				     bus, devfn, offs);
				HALT_SYS();
			} else {
				rtas_pci_config_write(bios_device.puid,
						      size, bus, devfn, offs,
						      val);
				DEBUG_PRINTF_IO
				    ("%s(%04x) PCI Config Write @%02x, size: %d <-- 0x%08x\n",
				     __FUNCTION__, addr, offs, size, val);
			}
		}
	}
}

uint8_t
handle_port_61h()
{
	static uint64_t last_time = 0;
	uint64_t curr_time = get_time();
	uint64_t time_diff;	// time since last call
	uint32_t period_ticks;	// length of a period in ticks
	uint32_t nr_periods;	//number of periods passed since last call
	// bit 4 should toggle with every (DRAM) refresh cycle... (66kHz??)
	time_diff = curr_time - last_time;
	// at 66kHz a period is ~ 15 ns long, converted to ticks: (tb_freq is ticks/second)
	// TODO: as long as the frequency does not change, we should not calculate this every time
	period_ticks = (15 * tb_freq) / 1000000;
	nr_periods = time_diff / period_ticks;
	// if the number if ticks passed since last call is odd, we toggle bit 4
	if ((nr_periods % 2) != 0) {
		*((uint8_t *) (bios_device.io_buffer + 0x61)) ^= 0x10;
	}
	//finally read the value from the io_buffer
	return *((uint8_t *) (bios_device.io_buffer + 0x61));
}

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.