![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to ata.h CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Qemu by Fabrice Bellard] / qemu / roms / seabios / src|
Return to ata.h CVS log | Up to [Qemu by Fabrice Bellard] / qemu / roms / seabios / src |
1.1 root 1: #ifndef __ATA_H
2: #define __ATA_H
3:
4: #include "types.h" // u8
5: #include "config.h" // CONFIG_MAX_ATA_INTERFACES
6:
7: struct ata_channel_s {
8: u16 iobase1;
9: u16 iobase2;
1.1.1.2 ! root 10: u16 iomaster;
1.1 root 11: u8 irq;
12: int pci_bdf;
13: };
14:
15: // ata.c
16: extern struct ata_channel_s ATA_channels[CONFIG_MAX_ATA_INTERFACES];
17: int cdrom_read(struct disk_op_s *op);
18: int ata_cmd_packet(struct drive_s *drive_g, u8 *cmdbuf, u8 cmdlen
19: , u32 length, void *buf_fl);
1.1.1.2 ! root 20: void ata_setup(void);
1.1 root 21: int process_ata_op(struct disk_op_s *op);
22: int process_atapi_op(struct disk_op_s *op);
23: void describe_ata(struct drive_s *drive_g);
24: void describe_atapi(struct drive_s *drive_g);
25:
26: // Global defines -- ATA register and register bits.
27: // command block & control block regs
28: #define ATA_CB_DATA 0 // data reg in/out pio_base_addr1+0
29: #define ATA_CB_ERR 1 // error in pio_base_addr1+1
30: #define ATA_CB_FR 1 // feature reg out pio_base_addr1+1
31: #define ATA_CB_SC 2 // sector count in/out pio_base_addr1+2
32: #define ATA_CB_SN 3 // sector number in/out pio_base_addr1+3
33: #define ATA_CB_CL 4 // cylinder low in/out pio_base_addr1+4
34: #define ATA_CB_CH 5 // cylinder high in/out pio_base_addr1+5
35: #define ATA_CB_DH 6 // device head in/out pio_base_addr1+6
36: #define ATA_CB_STAT 7 // primary status in pio_base_addr1+7
37: #define ATA_CB_CMD 7 // command out pio_base_addr1+7
38:
39: #define ATA_CB_ASTAT 2 // alternate status in pio_base_addr2+2
40: #define ATA_CB_DC 2 // device control out pio_base_addr2+2
41: #define ATA_CB_DA 3 // device address in pio_base_addr2+3
42:
43: #define ATA_CB_ER_ICRC 0x80 // ATA Ultra DMA bad CRC
44: #define ATA_CB_ER_BBK 0x80 // ATA bad block
45: #define ATA_CB_ER_UNC 0x40 // ATA uncorrected error
46: #define ATA_CB_ER_MC 0x20 // ATA media change
47: #define ATA_CB_ER_IDNF 0x10 // ATA id not found
48: #define ATA_CB_ER_MCR 0x08 // ATA media change request
49: #define ATA_CB_ER_ABRT 0x04 // ATA command aborted
50: #define ATA_CB_ER_NTK0 0x02 // ATA track 0 not found
51: #define ATA_CB_ER_NDAM 0x01 // ATA address mark not found
52:
53: #define ATA_CB_ER_P_SNSKEY 0xf0 // ATAPI sense key (mask)
54: #define ATA_CB_ER_P_MCR 0x08 // ATAPI Media Change Request
55: #define ATA_CB_ER_P_ABRT 0x04 // ATAPI command abort
56: #define ATA_CB_ER_P_EOM 0x02 // ATAPI End of Media
57: #define ATA_CB_ER_P_ILI 0x01 // ATAPI Illegal Length Indication
58:
59: // ATAPI Interrupt Reason bits in the Sector Count reg (CB_SC)
60: #define ATA_CB_SC_P_TAG 0xf8 // ATAPI tag (mask)
61: #define ATA_CB_SC_P_REL 0x04 // ATAPI release
62: #define ATA_CB_SC_P_IO 0x02 // ATAPI I/O
63: #define ATA_CB_SC_P_CD 0x01 // ATAPI C/D
64:
65: // bits 7-4 of the device/head (CB_DH) reg
66: #define ATA_CB_DH_DEV0 0xa0 // select device 0
67: #define ATA_CB_DH_DEV1 0xb0 // select device 1
68: #define ATA_CB_DH_LBA 0x40 // use LBA
69:
70: // status reg (CB_STAT and CB_ASTAT) bits
71: #define ATA_CB_STAT_BSY 0x80 // busy
72: #define ATA_CB_STAT_RDY 0x40 // ready
73: #define ATA_CB_STAT_DF 0x20 // device fault
74: #define ATA_CB_STAT_WFT 0x20 // write fault (old name)
75: #define ATA_CB_STAT_SKC 0x10 // seek complete
76: #define ATA_CB_STAT_SERV 0x10 // service
77: #define ATA_CB_STAT_DRQ 0x08 // data request
78: #define ATA_CB_STAT_CORR 0x04 // corrected
79: #define ATA_CB_STAT_IDX 0x02 // index
80: #define ATA_CB_STAT_ERR 0x01 // error (ATA)
81: #define ATA_CB_STAT_CHK 0x01 // check (ATAPI)
82:
83: // device control reg (CB_DC) bits
84: #define ATA_CB_DC_HD15 0x08 // bit should always be set to one
85: #define ATA_CB_DC_SRST 0x04 // soft reset
86: #define ATA_CB_DC_NIEN 0x02 // disable interrupts
87:
88: // Most mandtory and optional ATA commands (from ATA-3),
89: #define ATA_CMD_CFA_ERASE_SECTORS 0xC0
90: #define ATA_CMD_CFA_REQUEST_EXT_ERR_CODE 0x03
91: #define ATA_CMD_CFA_TRANSLATE_SECTOR 0x87
92: #define ATA_CMD_CFA_WRITE_MULTIPLE_WO_ERASE 0xCD
93: #define ATA_CMD_CFA_WRITE_SECTORS_WO_ERASE 0x38
94: #define ATA_CMD_CHECK_POWER_MODE1 0xE5
95: #define ATA_CMD_CHECK_POWER_MODE2 0x98
96: #define ATA_CMD_DEVICE_RESET 0x08
97: #define ATA_CMD_EXECUTE_DEVICE_DIAGNOSTIC 0x90
98: #define ATA_CMD_FLUSH_CACHE 0xE7
99: #define ATA_CMD_FORMAT_TRACK 0x50
100: #define ATA_CMD_IDENTIFY_DEVICE 0xEC
101: #define ATA_CMD_IDENTIFY_PACKET_DEVICE 0xA1
102: #define ATA_CMD_IDLE1 0xE3
103: #define ATA_CMD_IDLE2 0x97
104: #define ATA_CMD_IDLE_IMMEDIATE1 0xE1
105: #define ATA_CMD_IDLE_IMMEDIATE2 0x95
106: #define ATA_CMD_INITIALIZE_DRIVE_PARAMETERS 0x91
107: #define ATA_CMD_INITIALIZE_DEVICE_PARAMETERS 0x91
108: #define ATA_CMD_NOP 0x00
109: #define ATA_CMD_PACKET 0xA0
110: #define ATA_CMD_READ_BUFFER 0xE4
111: #define ATA_CMD_READ_DMA 0xC8
1.1.1.2 ! root 112: #define ATA_CMD_READ_DMA_EXT 0x25
1.1 root 113: #define ATA_CMD_READ_DMA_QUEUED 0xC7
1.1.1.2 ! root 114: #define ATA_CMD_READ_DMA_QUEUED_EXT 0x26
! 115: #define ATA_CMD_READ_LOG_EXT 0x2F
1.1 root 116: #define ATA_CMD_READ_MULTIPLE 0xC4
1.1.1.2 ! root 117: #define ATA_CMD_READ_MULTIPLE_EXT 0x29
! 118: #define ATA_CMD_READ_NATIVE_MAX_ADDRESS 0xF8
! 119: #define ATA_CMD_READ_NATIVE_MAX_ADDRESS_EXT 0x27
1.1 root 120: #define ATA_CMD_READ_SECTORS 0x20
121: #define ATA_CMD_READ_SECTORS_EXT 0x24
122: #define ATA_CMD_READ_VERIFY_SECTORS 0x40
1.1.1.2 ! root 123: #define ATA_CMD_READ_VERIFY_SECTORS_EXT 0x42
1.1 root 124: #define ATA_CMD_RECALIBRATE 0x10
125: #define ATA_CMD_REQUEST_SENSE 0x03
126: #define ATA_CMD_SEEK 0x70
127: #define ATA_CMD_SET_FEATURES 0xEF
1.1.1.2 ! root 128: #define ATA_CMD_SET_MAX 0xF9
! 129: #define ATA_CMD_SET_MAX_ADDRESS_EXT 0x37
1.1 root 130: #define ATA_CMD_SET_MULTIPLE_MODE 0xC6
131: #define ATA_CMD_SLEEP1 0xE6
132: #define ATA_CMD_SLEEP2 0x99
133: #define ATA_CMD_STANDBY1 0xE2
134: #define ATA_CMD_STANDBY2 0x96
135: #define ATA_CMD_STANDBY_IMMEDIATE1 0xE0
136: #define ATA_CMD_STANDBY_IMMEDIATE2 0x94
137: #define ATA_CMD_WRITE_BUFFER 0xE8
138: #define ATA_CMD_WRITE_DMA 0xCA
1.1.1.2 ! root 139: #define ATA_CMD_WRITE_DMA_EXT 0x35
1.1 root 140: #define ATA_CMD_WRITE_DMA_QUEUED 0xCC
1.1.1.2 ! root 141: #define ATA_CMD_WRITE_DMA_QUEUED_EXT 0x36
! 142: #define ATA_CMD_WRITE_LOG_EXT 0x3F
1.1 root 143: #define ATA_CMD_WRITE_MULTIPLE 0xC5
1.1.1.2 ! root 144: #define ATA_CMD_WRITE_MULTIPLE_EXT 0x39
1.1 root 145: #define ATA_CMD_WRITE_SECTORS 0x30
146: #define ATA_CMD_WRITE_SECTORS_EXT 0x34
147: #define ATA_CMD_WRITE_VERIFY 0x3C
148:
149: #endif // ata.h
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.