Return to ckuker.mak CVS log

Up to [Research Unix] / researchv10dc / lbin / kermit

Annotation of researchv10dc/lbin/kermit/ckuker.mak, revision 1.1

1.1     ! root        1: # CKUKER.MAK, Version 2.11, 29 January 1988
        !             2: #
        !             3: # -- Makefile to build C-Kermit for Unix and Unix-like systems --
        !             4: #
        !             5: # Before proceeding, read the instructions below, and also read the file
        !             6: # ckuker.bwr (the "beware file"), and then rename this file to "makefile"
        !             7: # or "Makefile", and then:
        !             8: #
        !             9: # for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24"
        !            10: # for Amdahl UTSV IBM 370 series & compatible mainframes, "make sys3"
        !            11: # for AT&T 3Bx systems, "make att3bx"
        !            12: # for AT&T 7300 Unix PC, "make att7300" (accesses built-in dialer)
        !            13: # for AT&T generic System III/System V, "make sys3" or "make sys3nid"
        !            14: # for ATT System V R3, use "make sys5r3".  This is different from the above.
        !            15: # for BBN C/70 with IOS 2.0, "make c70"
        !            16: # for Bell Unix Version 7 (aka 7th Edition), "make v7" (but see below)
        !            17: # for Berkeley Unix 4.x, "make bsd" (tested with 4.1, 4.2, and 4.3)
        !            18: # for Berkeley Unix 2.9 (DEC PDP-11 or Pro-3xx), "make bsd29"
        !            19: # for CDC VX/VE 5.2.1 Sys V emulation, "make vxve"
        !            20: # for CIE Systems 680/20 with Regulus, "make cie"
        !            21: # for DEC Ultrix 1.1 or 1.2, "make bsd"
        !            22: # for DEC Pro-350 with Pro/Venix V1.x, "make provx1"
        !            23: # for DEC Pro-350 with Pro/Venix V2.0 (Sys V), "make sys3nid" 
        !            24: # for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
        !            25: # for Fortune 32:16, For:Pro 1.8, "make ft18"
        !            26: # for HP-9000 Series with HP-UX, "make hpux"
        !            27: # for IBM 370 Series with IX/370, "make ix370"
        !            28: # for Interactive System III (PC/IX) on PC/XT, "make pcix"
        !            29: # for Interactive Sys III on other systems, "make is3"
        !            30: # for Masscomp variation on Sys III, "make rtu"
        !            31: # for Microsoft,IBM Xenix (/286, PC/AT, etc), "make xenix" (but see below)
        !            32: # for NCR Tower 1632, OS 1.02, "make tower1"
        !            33: # for NCR Tower 1632 with System V, "make sys3"
        !            34: # for SCO Xenix/286 2.2.1 with development system 2.2 on 80286, "make sco286"
        !            35: # for SCO Xenix/286 2.2.1 with development system 2.2 on 8086/8 "make sco86"
        !            36: # for Sequent Balance 8000, "make bsd"
        !            37: # for Valid Scaldstar, "make valid"
        !            38: #
        !            39: # The result is a runnable program called "wermit" in the current directory.
        !            40: # After satisfactory testing, you can rename wermit to "kermit" and put it
        !            41: # where users can find it.
        !            42: #
        !            43: # To remove intermediate and object files, "make clean".
        !            44: # To run lint on the source file, "make lint".
        !            45: #
        !            46: ##############################################################################
        !            47: #
        !            48: # Notes:
        !            49: #
        !            50: #  In many cases, the -O (optimize) compiler switch is omitted.  Feel free
        !            51: #  to add it if you trust your optimizer.  The ckuus2.c module, in particular,
        !            52: #  tends to make optimizers blow up.
        !            53: #
        !            54: #  "make bsd" should produce a working C-Kermit for 4.1, 4.2, and
        !            55: #  4.3bsd on VAX, SUN, Pyramid, and other 4.x systems.
        !            56: #
        !            57: #  Either "make sys3" or "make sys3nid" tends to produce a working version on
        !            58: #  any ATT System III or System V R2 or earlier system, including Motorola Four
        !            59: #  Phase, Callan, Unistar, Cadmus, NCR Tower, HP9836 Series 200, Plexus,
        !            60: #  Heurikon, etc etc (for exceptions, see below; AT&T 3Bx systems have their
        !            61: #  own entry).  As far as C-Kermit goes, there is no functional difference
        !            62: #  between ATT System III and System V R2, so there is no need for a separate
        !            63: #  "make sys5" entry (but there is one anyway; it merely invokes "make sys3").
        !            64: #  But for ATT System V R3, use "make sys5r3".  This is different from the 
        !            65: #  above because of the redefinition of signal().
        !            66: #
        !            67: #  "make sys3nid" is equivalent to "make sys3" but leaves out the -i option,
        !            68: #  which is used indicate that separate instruction and data (text) spaces are
        !            69: #  to be used, as on a PDP-11.  Some systems don't support this option, others
        !            70: #  may require it.  If one of these options doesn't work on your System III
        !            71: #  or System V system, try the other.
        !            72: #
        !            73: #  For Xenix...  What's Xenix?  There are so many different products & versions
        !            74: #  sold under this name, the name "xenix" is almost meaningless.  IBM, SCO,
        !            75: #  Microsoft, etc, IBM Xenix 1.0 =(?) Microsoft Xenix 3.0 = ???  Nevertheless,
        !            76: #  try "make xenix" for IBM or Microsoft, or "make sco286" or "make sco86" for
        !            77: #  for SCO Xenix.  If these don't work, try the following modifications to
        !            78: #  this Makefile:
        !            79: #    Change "CC= cc" to "CC = cc -LARGE"
        !            80: #    In the "xenix:" make entry, add "-M2m -UM_I86" to the compiler switches
        !            81: #    (for the IBM PC family), and "-Mm -lx" to the link switches.
        !            82: #
        !            83: #  For Unix Version 7, several variables must be defined to the values
        !            84: #  associated with your system.  BOOTNAME=/edition7 is the kernel image on
        !            85: #  okstate's Perkin-Elmer 3230.  Others will probably be /unix.  PROCNAME=proc
        !            86: #  is the name of the structure assigned to each process on okstate's system.
        !            87: #  This may be "_proc" or some other variation.  See <sys/proc.h> for more info
        !            88: #  on your systems name conventions.  NPROCNAME=nproc is the name of a
        !            89: #  Kernal variable that tells how many "proc" structures there are.  Again
        !            90: #  this may be different on your system, but nproc will probably be somewhere.
        !            91: #  The variable NPTYPE is the type of the nproc variable -- int, short, etc.
        !            92: #  which can probably be gleaned from <sys/param.h>.
        !            93: #  The definition of DIRECT is a little more complicated.  If nlist() returns,
        !            94: #  for "proc" only, the address of the array, then you should define DIRECT
        !            95: #  as it is below.  If however, nlist() returns the address of a pointer to
        !            96: #  the array, then you should give DIRECT a null definition (DIRECT= ).  The
        !            97: #  extern declaration in <sys/proc.h> should clarify this for you.  If it
        !            98: #  is "extern struct proc *proc", then you should NOT define DIRECT.  If it
        !            99: #  is "extern struct proc proc[]", then you should probably define DIRECT as
        !           100: #  it is below.  See ckuv7.hlp for further information.
        !           101: #
        !           102: #  For 2.9bsd, the makefile may use pcc rather than cc for compiles;
        !           103: #  that's what the CC and CC2 definitions are for (the current version
        !           104: #  of the makefile uses cc for both; this was tested and seems to work on
        !           105: #  the DEC Pro 380).  2.9 support basically follows the 4.1 path.
        !           106: #  Some 2.9 systems use "dir.h" for the directory header file, others
        !           107: #  will need to change this to "ndir.h".
        !           108: #
        !           109: #  The v7 and 2.9bsd versions assume I&D space on a PDP-11.  When building
        !           110: #  C-Kermit for v7 on a PDP-11, you should probably add the -i option to
        !           111: #  the link flags.  Without I&D space, overlays would probably have to be
        !           112: #  used (or code mapping a`la Pro/Venix if that's available).
        !           113: #
        !           114: #  Other systems require some special treatment:
        !           115: #
        !           116: #  For Ridge32 (ROS3.2), use "make sys3", but
        !           117: #  1. Use "CFLAGS = -DUXIII -i -O" "LNKFLAGS = -i"
        !           118: #  2. Don't #include <sys/file.h> in cku[tf]io.c.
        !           119: #
        !           120: #  For Whitechapel MG-1 Genix 1.3, use "make bsd", but
        !           121: #  1. In ckufio.c, have zkself() return 0 or call getpid, rather than getppid,
        !           122: #     or simply do "return(kill(0,9))" rather than "return(kill getppid(),1)".
        !           123: #  2. Wart reportedly can't process ckcpro.w; just work directly from ckcpro.c.
        !           124: #
        !           125: #  For Pixel 1000, use "make bsd", do step 1 for Whitechapel MG-1, above.
        !           126: #
        !           127: #  For Altos 986 with Xenix 3.0, use "make sys3", but
        !           128: #  1. Get rid of any "(void)"'s (they're only there for Lint anyway)
        !           129: #  2. In ckcdeb.h, define CHAR to be "char" rather than "unsigned char".
        !           130: #
        !           131: #  For IBM PC/AT and clones running Microport Sys 5.2 Rel.2, change
        !           132: #  'wait(0)' everywhere to 'wait((int *)0)', and use the -Ml link switch.
        !           133: #
        !           134: #  Other systems that are close to, but not quite, like Sys III or V, or
        !           135: #  4.x BSD or V7 -- look at some of the tricks used below and see if you
        !           136: #  can find a combination that works for you.
        !           137: #
        !           138: ##############################################################################
        !           139: #
        !           140: #  V7-specific variables.
        !           141: #  These are set up for Perkin-Elmer 3230 V7 Unix:
        !           142: # 
        !           143: PROC=_proc
        !           144: DIRECT=
        !           145: NPROC=_proccnt
        !           146: NPTYPE=int
        !           147: BOOTFILE=/unix
        !           148: #
        !           149: # ( For TRS-80 Xenix, use PROC=_proc, DIRECT=-DDIRECT, NPROC=_Nproc, 
        !           150: #   NPTYPE=short, BOOTFILE=/xenix )
        !           151: #
        !           152: ###########################################################################
        !           153: #
        !           154: #  Compile and Link variables:
        !           155: #
        !           156: LNKFLAGS=
        !           157: SHAREDLIB=
        !           158: CC= cc
        !           159: CC2= cc
        !           160: #
        !           161: ###########################################################################
        !           162: #
        !           163: # Dependencies Section:
        !           164: #
        !           165: make: 
        !           166:        @echo 'Make what?  You must tell which system to make C-Kermit for.'
        !           167: 
        !           168: wermit: ckcmai.o ckucmd.o ckuusr.o ckuus2.o ckuus3.o ckcpro.o ckcfns.o \
        !           169:                 ckcfn2.o ckucon.o ckutio.o ckufio.o ckudia.o ckuscr.o
        !           170:        $(CC2) $(LNKFLAGS) $(SHAREDLIB) -o wermit ckcmai.o ckutio.o \
        !           171:                 ckufio.o ckcfns.o \
        !           172:                 ckcfn2.o ckcpro.o ckucmd.o ckuus2.o ckuus3.o ckuusr.o \
        !           173:                 ckucon.o ckudia.o ckuscr.o
        !           174: 
        !           175: ckcmai.o: ckcmai.c ckcker.h ckcdeb.h ckcsym.h
        !           176: 
        !           177: ckuusr.o: ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
        !           178: 
        !           179: ckuus2.o: ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
        !           180: 
        !           181: ckuus3.o: ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
        !           182: 
        !           183: ckucmd.o: ckucmd.c ckucmd.h ckcdeb.h
        !           184: 
        !           185: ckcpro.o: ckcpro.c ckcker.h ckcdeb.h
        !           186: 
        !           187: ckcpro.c: ckcpro.w wart
        !           188:        ./wart ckcpro.w ckcpro.c
        !           189: 
        !           190: ckcfns.o: ckcfns.c ckcker.h ckcdeb.h ckcsym.h
        !           191: 
        !           192: ckcfn2.o: ckcfn2.c ckcker.h ckcdeb.h ckcsym.h
        !           193: 
        !           194: ckufio.o: ckufio.c ckcker.h ckcdeb.h
        !           195: 
        !           196: ckutio.o: ckutio.c ckcdeb.h
        !           197: 
        !           198: ckucon.o: ckucon.c ckcker.h ckcdeb.h
        !           199: 
        !           200: wart: ckwart.o
        !           201:        $(CC) $(LNKFLAGS) -o wart ckwart.o
        !           202: 
        !           203: ckwart.o: ckwart.c
        !           204: 
        !           205: ckudia.o: ckudia.c ckcker.h ckcdeb.h ckucmd.h
        !           206: 
        !           207: ckuscr.o: ckuscr.c ckcker.h ckcdeb.h
        !           208: #
        !           209: ###########################################################################
        !           210: #
        !           211: # Make commands for specific systems:
        !           212: #
        !           213: #
        !           214: #Berkeley Unix 4.1 or 4.2 (and presumably also 4.3), also Ultrix-32 1.x, 2.0
        !           215: bsd:
        !           216:        make wermit "CFLAGS= -DBSD4 -DDEBUG -DTLOG"
        !           217: 
        !           218: 
        !           219: #Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space, maybe also Ultrix-11???
        !           220: #If you have trouble with this, try removing "-l ndir".  If you still have
        !           221: #trouble, remove "-DDEBUG -DTLOG".  Or try defining CC and/or CC2 as "pcc"
        !           222: #instead of "cc".
        !           223: bsd29:
        !           224:        make wermit "CFLAGS= -DBSD29 -DDEBUG -DTLOG" \
        !           225:                "LNKFLAGS= -i -lndir" "CC= cc " "CC2= cc"
        !           226: 
        !           227: #Version 7 Unix
        !           228: v7:
        !           229:        make wermit "CFLAGS=-DV7 -DDEBUG -DTLOG -DPROCNAME=\\\"$(PROC)\\\" \
        !           230:        -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
        !           231:        -DNPTYPE=$(NPTYPE) $(DIRECT)"
        !           232: 
        !           233: #Version 9 Unix
        !           234: v9:
        !           235:        make wermit "CFLAGS=-DV9 -DFIONREAD -DDEBUG -DTLOG \
        !           236:        -DPROCNAME=\\\"$(PROC)\\\" -DBOOTNAME=\\\"$(BOOTFILE)\\\" \
        !           237:        -DNPROCNAME=\\\"$(NPROC)\\\" -DNPTYPE=$(NPTYPE) $(DIRECT)"
        !           238: 
        !           239: #System V R3, some things changed since Sys V R2...
        !           240: sys5r3:
        !           241:        make wermit "CFLAGS = -DSVR3 -DUXIII -DDEBUG -DTLOG -i -O" \
        !           242:                "LNKFLAGS = -i"
        !           243: 
        !           244: #In case they type "make sys5"...
        !           245: sys5:
        !           246:        make sys3
        !           247: 
        !           248: #Generic ATT System III or System V (with I&D space)
        !           249: sys3:
        !           250:        make wermit "CFLAGS = -DUXIII -DDEBUG -DTLOG -i -O" \
        !           251:                "LNKFLAGS = -i" 
        !           252: 
        !           253: #AT&T 7300 Unix PC
        !           254: att7300:
        !           255:        make wermit "CFLAGS = -DUXIII -DATT7300 -DDEBUG -DTLOG -i -O" \
        !           256:                "LNKFLAGS = -i" \
        !           257:                "SHAREDLIB = /lib/crt0s.o /lib/shlib.ifile"
        !           258: 
        !           259: #Generic ATT System III or System V (no I&D space)
        !           260: sys3nid:
        !           261:        make wermit "CFLAGS = -DUXIII -DDEBUG -DTLOG -O" "LNKFLAGS ="
        !           262: 
        !           263: #AT&T 3B-series computers running System V
        !           264: #  Only difference from sys3 is lock file stuff...
        !           265: att3bx:
        !           266:        make wermit "CFLAGS = -DUXIII -DATT3BX -DDEBUG -DTLOG -i -O" \
        !           267:                "LNKFLAGS = -i"
        !           268: 
        !           269: #HP 9000 series 300, 500, 800.
        !           270: hpux:
        !           271:        make wermit "CFLAGS = -DUXIII -DHPUX -DDEBUG -DTLOG -O" "LNKFLAGS ="
        !           272: 
        !           273: #Regulus on CIE Systems 680/20
        !           274: cie:
        !           275:        make wermit "CFLAGS = -DUXIII -DCIE -DDEBUG -DTLOG -O" "LNKFLAGS ="
        !           276: 
        !           277: #Microsoft "Xenix/286" e.g. for IBM PC/AT
        !           278: xenix:
        !           279:        make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i" \
        !           280:                "LNKFLAGS = -F 3000 -i"
        !           281: 
        !           282: #SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
        !           283: sco286:
        !           284:        make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i -M2le" \
        !           285:                "LNKFLAGS = -F 3000 -i -M2le"
        !           286: 
        !           287: #SCO Xenix 2.2.1 for IBM PC, XT, PS2/30, or other 8088 or 8086 machine
        !           288: sco86:
        !           289:        make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i -Mle" \
        !           290:                "LNKFLAGS = -F 3000 -i -Mle"
        !           291: 
        !           292: #PC/IX, Interactive Corp System III for IBM PC/XT
        !           293: pcix:
        !           294:        make wermit \
        !           295:        "CFLAGS= -DPCIX -DUXIII -DISIII -DDEBUG -DTLOG -Dsdata=sdatax -O -i" \
        !           296:                "LNKFLAGS = -i"
        !           297: 
        !           298: 
        !           299: #Interactive Corp System III port in general --
        !           300: is3:
        !           301:        make wermit \
        !           302:                "CFLAGS = -DISIII -DUXIII -DDEBUG -DTLOG -Ddata=datax -O -i" \
        !           303:                "LNKFLAGS = -i"
        !           304: 
        !           305: 
        !           306: #Masscomp System III
        !           307: rtu:
        !           308:        make wermit "CFLAGS= -UFIONREAD -DUXIII -DDEBUG -DTLOG -O" \
        !           309:                "LNKFLAGS ="
        !           310: 
        !           311: #DEC Pro-3xx with Pro/Venix V1.0 or V1.1
        !           312: # Requires code-mapping on non-I&D-space 11/23 processor, plus some
        !           313: # fiddling to get interrupt targets into resident code section.
        !           314: provx1:
        !           315:        make wart "CFLAGS= -DPROVX1" "LNKFLAGS= "
        !           316:        make wermit "CFLAGS = -DPROVX1 -DDEBUG -DTLOG -md780" \
        !           317:                "LNKFLAGS= -u _sleep -lc -md780"
        !           318: 
        !           319: #NCR Tower 1632, OS 1.02
        !           320: tower1:
        !           321:        make wermit "CFLAGS= -DDEBUG -DTLOG -DTOWER1"
        !           322: 
        !           323: #Fortune 32:16, For:Pro 1.8 (mostly like 4.1bsd)
        !           324: ft18:
        !           325:        make wermit "CFLAGS= -DTLOG -DBSD4 -DFT18"
        !           326: 
        !           327: #Valid Scaldstar
        !           328: #Berkeleyish, but need to change some variable names.
        !           329: valid:
        !           330:        make wermit "CFLAGS= -DBSD4 -Dcc=ccx -DFREAD=1"
        !           331: 
        !           332: #IBM IX/370 on IBM 370 Series mainframes
        !           333: #Mostly like sys3, but should buffer packets.
        !           334: ix370:
        !           335:        make wermit "CFLAGS = -DIX370 -DUXIII -DDEBUG -DTLOG -i -O" \
        !           336:        "LNKFLAGS = -i"
        !           337: 
        !           338: #Amdahl UTS 2.4 on IBM 370 series compatible mainframes.
        !           339: #Mostly like V7, but can't do initrawq() buffer peeking.
        !           340: uts24:
        !           341:        make wermit "CFLAGS=-DV7 -DDEBUG -DTLOG -DPROCNAME=\\\"$(PROC)\\\" \
        !           342:        -DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
        !           343:        -DNPTYPE=$(NPTYPE) $(DIRECT)"
        !           344: 
        !           345: #BBN C/70 with IOS 2.0
        !           346: #Mostly Berkeley-like, but with some ATTisms
        !           347: c70:
        !           348:        make wermit "CFLAGS= -DBSD4 -DC70 -DDEBUG -DTLOG"
        !           349: 
        !           350: #Zilog ZEUS 3.21
        !           351: zilog:
        !           352:        make wermit "CFLAGS = -DUXIII -DZILOG -DTLOG -i -O" "LNKFLAGS = -i"
        !           353: 
        !           354: #CDC VX/VE 5.2.1
        !           355: vxve:
        !           356:        make wermit "CFLAGS = -DUXIII -DVXVE -i -O" "LNKFLAGS = -i"
        !           357: 
        !           358: #Clean up intermediate and object files
        !           359: clean:
        !           360:        -rm -f ckcmai.o ckucmd.o ckuusr.o ckuus2.o ckuus3.o ckcpro.o \
        !           361:        ckcfns.o ckcfn2.o ckucon.o ckutio.o ckufio.o ckudia.o ckuscr.o \
        !           362:        ckwart.o ckcpro.c
        !           363: 
        !           364: #Run Lint on this mess for the BSD version.
        !           365: lint:
        !           366:        -lint -x -DBSD4 -DDEBUG -DTLOG ck[cu]*.[hc] > ck.lint.bsd4
        !           367: 

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.