![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to ckuker.mak CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Research Unix] / researchv10dc / lbin / kermit|
Return to ckuker.mak CVS log | Up to [Research Unix] / researchv10dc / lbin / kermit |
1.1 root 1: # CKUKER.MAK, Version 2.11, 29 January 1988
2: #
3: # -- Makefile to build C-Kermit for Unix and Unix-like systems --
4: #
5: # Before proceeding, read the instructions below, and also read the file
6: # ckuker.bwr (the "beware file"), and then rename this file to "makefile"
7: # or "Makefile", and then:
8: #
9: # for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24"
10: # for Amdahl UTSV IBM 370 series & compatible mainframes, "make sys3"
11: # for AT&T 3Bx systems, "make att3bx"
12: # for AT&T 7300 Unix PC, "make att7300" (accesses built-in dialer)
13: # for AT&T generic System III/System V, "make sys3" or "make sys3nid"
14: # for ATT System V R3, use "make sys5r3". This is different from the above.
15: # for BBN C/70 with IOS 2.0, "make c70"
16: # for Bell Unix Version 7 (aka 7th Edition), "make v7" (but see below)
17: # for Berkeley Unix 4.x, "make bsd" (tested with 4.1, 4.2, and 4.3)
18: # for Berkeley Unix 2.9 (DEC PDP-11 or Pro-3xx), "make bsd29"
19: # for CDC VX/VE 5.2.1 Sys V emulation, "make vxve"
20: # for CIE Systems 680/20 with Regulus, "make cie"
21: # for DEC Ultrix 1.1 or 1.2, "make bsd"
22: # for DEC Pro-350 with Pro/Venix V1.x, "make provx1"
23: # for DEC Pro-350 with Pro/Venix V2.0 (Sys V), "make sys3nid"
24: # for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
25: # for Fortune 32:16, For:Pro 1.8, "make ft18"
26: # for HP-9000 Series with HP-UX, "make hpux"
27: # for IBM 370 Series with IX/370, "make ix370"
28: # for Interactive System III (PC/IX) on PC/XT, "make pcix"
29: # for Interactive Sys III on other systems, "make is3"
30: # for Masscomp variation on Sys III, "make rtu"
31: # for Microsoft,IBM Xenix (/286, PC/AT, etc), "make xenix" (but see below)
32: # for NCR Tower 1632, OS 1.02, "make tower1"
33: # for NCR Tower 1632 with System V, "make sys3"
34: # for SCO Xenix/286 2.2.1 with development system 2.2 on 80286, "make sco286"
35: # for SCO Xenix/286 2.2.1 with development system 2.2 on 8086/8 "make sco86"
36: # for Sequent Balance 8000, "make bsd"
37: # for Valid Scaldstar, "make valid"
38: #
39: # The result is a runnable program called "wermit" in the current directory.
40: # After satisfactory testing, you can rename wermit to "kermit" and put it
41: # where users can find it.
42: #
43: # To remove intermediate and object files, "make clean".
44: # To run lint on the source file, "make lint".
45: #
46: ##############################################################################
47: #
48: # Notes:
49: #
50: # In many cases, the -O (optimize) compiler switch is omitted. Feel free
51: # to add it if you trust your optimizer. The ckuus2.c module, in particular,
52: # tends to make optimizers blow up.
53: #
54: # "make bsd" should produce a working C-Kermit for 4.1, 4.2, and
55: # 4.3bsd on VAX, SUN, Pyramid, and other 4.x systems.
56: #
57: # Either "make sys3" or "make sys3nid" tends to produce a working version on
58: # any ATT System III or System V R2 or earlier system, including Motorola Four
59: # Phase, Callan, Unistar, Cadmus, NCR Tower, HP9836 Series 200, Plexus,
60: # Heurikon, etc etc (for exceptions, see below; AT&T 3Bx systems have their
61: # own entry). As far as C-Kermit goes, there is no functional difference
62: # between ATT System III and System V R2, so there is no need for a separate
63: # "make sys5" entry (but there is one anyway; it merely invokes "make sys3").
64: # But for ATT System V R3, use "make sys5r3". This is different from the
65: # above because of the redefinition of signal().
66: #
67: # "make sys3nid" is equivalent to "make sys3" but leaves out the -i option,
68: # which is used indicate that separate instruction and data (text) spaces are
69: # to be used, as on a PDP-11. Some systems don't support this option, others
70: # may require it. If one of these options doesn't work on your System III
71: # or System V system, try the other.
72: #
73: # For Xenix... What's Xenix? There are so many different products & versions
74: # sold under this name, the name "xenix" is almost meaningless. IBM, SCO,
75: # Microsoft, etc, IBM Xenix 1.0 =(?) Microsoft Xenix 3.0 = ??? Nevertheless,
76: # try "make xenix" for IBM or Microsoft, or "make sco286" or "make sco86" for
77: # for SCO Xenix. If these don't work, try the following modifications to
78: # this Makefile:
79: # Change "CC= cc" to "CC = cc -LARGE"
80: # In the "xenix:" make entry, add "-M2m -UM_I86" to the compiler switches
81: # (for the IBM PC family), and "-Mm -lx" to the link switches.
82: #
83: # For Unix Version 7, several variables must be defined to the values
84: # associated with your system. BOOTNAME=/edition7 is the kernel image on
85: # okstate's Perkin-Elmer 3230. Others will probably be /unix. PROCNAME=proc
86: # is the name of the structure assigned to each process on okstate's system.
87: # This may be "_proc" or some other variation. See <sys/proc.h> for more info
88: # on your systems name conventions. NPROCNAME=nproc is the name of a
89: # Kernal variable that tells how many "proc" structures there are. Again
90: # this may be different on your system, but nproc will probably be somewhere.
91: # The variable NPTYPE is the type of the nproc variable -- int, short, etc.
92: # which can probably be gleaned from <sys/param.h>.
93: # The definition of DIRECT is a little more complicated. If nlist() returns,
94: # for "proc" only, the address of the array, then you should define DIRECT
95: # as it is below. If however, nlist() returns the address of a pointer to
96: # the array, then you should give DIRECT a null definition (DIRECT= ). The
97: # extern declaration in <sys/proc.h> should clarify this for you. If it
98: # is "extern struct proc *proc", then you should NOT define DIRECT. If it
99: # is "extern struct proc proc[]", then you should probably define DIRECT as
100: # it is below. See ckuv7.hlp for further information.
101: #
102: # For 2.9bsd, the makefile may use pcc rather than cc for compiles;
103: # that's what the CC and CC2 definitions are for (the current version
104: # of the makefile uses cc for both; this was tested and seems to work on
105: # the DEC Pro 380). 2.9 support basically follows the 4.1 path.
106: # Some 2.9 systems use "dir.h" for the directory header file, others
107: # will need to change this to "ndir.h".
108: #
109: # The v7 and 2.9bsd versions assume I&D space on a PDP-11. When building
110: # C-Kermit for v7 on a PDP-11, you should probably add the -i option to
111: # the link flags. Without I&D space, overlays would probably have to be
112: # used (or code mapping a`la Pro/Venix if that's available).
113: #
114: # Other systems require some special treatment:
115: #
116: # For Ridge32 (ROS3.2), use "make sys3", but
117: # 1. Use "CFLAGS = -DUXIII -i -O" "LNKFLAGS = -i"
118: # 2. Don't #include <sys/file.h> in cku[tf]io.c.
119: #
120: # For Whitechapel MG-1 Genix 1.3, use "make bsd", but
121: # 1. In ckufio.c, have zkself() return 0 or call getpid, rather than getppid,
122: # or simply do "return(kill(0,9))" rather than "return(kill getppid(),1)".
123: # 2. Wart reportedly can't process ckcpro.w; just work directly from ckcpro.c.
124: #
125: # For Pixel 1000, use "make bsd", do step 1 for Whitechapel MG-1, above.
126: #
127: # For Altos 986 with Xenix 3.0, use "make sys3", but
128: # 1. Get rid of any "(void)"'s (they're only there for Lint anyway)
129: # 2. In ckcdeb.h, define CHAR to be "char" rather than "unsigned char".
130: #
131: # For IBM PC/AT and clones running Microport Sys 5.2 Rel.2, change
132: # 'wait(0)' everywhere to 'wait((int *)0)', and use the -Ml link switch.
133: #
134: # Other systems that are close to, but not quite, like Sys III or V, or
135: # 4.x BSD or V7 -- look at some of the tricks used below and see if you
136: # can find a combination that works for you.
137: #
138: ##############################################################################
139: #
140: # V7-specific variables.
141: # These are set up for Perkin-Elmer 3230 V7 Unix:
142: #
143: PROC=_proc
144: DIRECT=
145: NPROC=_proccnt
146: NPTYPE=int
147: BOOTFILE=/unix
148: #
149: # ( For TRS-80 Xenix, use PROC=_proc, DIRECT=-DDIRECT, NPROC=_Nproc,
150: # NPTYPE=short, BOOTFILE=/xenix )
151: #
152: ###########################################################################
153: #
154: # Compile and Link variables:
155: #
156: LNKFLAGS=
157: SHAREDLIB=
158: CC= cc
159: CC2= cc
160: #
161: ###########################################################################
162: #
163: # Dependencies Section:
164: #
165: make:
166: @echo 'Make what? You must tell which system to make C-Kermit for.'
167:
168: wermit: ckcmai.o ckucmd.o ckuusr.o ckuus2.o ckuus3.o ckcpro.o ckcfns.o \
169: ckcfn2.o ckucon.o ckutio.o ckufio.o ckudia.o ckuscr.o
170: $(CC2) $(LNKFLAGS) $(SHAREDLIB) -o wermit ckcmai.o ckutio.o \
171: ckufio.o ckcfns.o \
172: ckcfn2.o ckcpro.o ckucmd.o ckuus2.o ckuus3.o ckuusr.o \
173: ckucon.o ckudia.o ckuscr.o
174:
175: ckcmai.o: ckcmai.c ckcker.h ckcdeb.h ckcsym.h
176:
177: ckuusr.o: ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
178:
179: ckuus2.o: ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
180:
181: ckuus3.o: ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h
182:
183: ckucmd.o: ckucmd.c ckucmd.h ckcdeb.h
184:
185: ckcpro.o: ckcpro.c ckcker.h ckcdeb.h
186:
187: ckcpro.c: ckcpro.w wart
188: ./wart ckcpro.w ckcpro.c
189:
190: ckcfns.o: ckcfns.c ckcker.h ckcdeb.h ckcsym.h
191:
192: ckcfn2.o: ckcfn2.c ckcker.h ckcdeb.h ckcsym.h
193:
194: ckufio.o: ckufio.c ckcker.h ckcdeb.h
195:
196: ckutio.o: ckutio.c ckcdeb.h
197:
198: ckucon.o: ckucon.c ckcker.h ckcdeb.h
199:
200: wart: ckwart.o
201: $(CC) $(LNKFLAGS) -o wart ckwart.o
202:
203: ckwart.o: ckwart.c
204:
205: ckudia.o: ckudia.c ckcker.h ckcdeb.h ckucmd.h
206:
207: ckuscr.o: ckuscr.c ckcker.h ckcdeb.h
208: #
209: ###########################################################################
210: #
211: # Make commands for specific systems:
212: #
213: #
214: #Berkeley Unix 4.1 or 4.2 (and presumably also 4.3), also Ultrix-32 1.x, 2.0
215: bsd:
216: make wermit "CFLAGS= -DBSD4 -DDEBUG -DTLOG"
217:
218:
219: #Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space, maybe also Ultrix-11???
220: #If you have trouble with this, try removing "-l ndir". If you still have
221: #trouble, remove "-DDEBUG -DTLOG". Or try defining CC and/or CC2 as "pcc"
222: #instead of "cc".
223: bsd29:
224: make wermit "CFLAGS= -DBSD29 -DDEBUG -DTLOG" \
225: "LNKFLAGS= -i -lndir" "CC= cc " "CC2= cc"
226:
227: #Version 7 Unix
228: v7:
229: make wermit "CFLAGS=-DV7 -DDEBUG -DTLOG -DPROCNAME=\\\"$(PROC)\\\" \
230: -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
231: -DNPTYPE=$(NPTYPE) $(DIRECT)"
232:
233: #Version 9 Unix
234: v9:
235: make wermit "CFLAGS=-DV9 -DFIONREAD -DDEBUG -DTLOG \
236: -DPROCNAME=\\\"$(PROC)\\\" -DBOOTNAME=\\\"$(BOOTFILE)\\\" \
237: -DNPROCNAME=\\\"$(NPROC)\\\" -DNPTYPE=$(NPTYPE) $(DIRECT)"
238:
239: #System V R3, some things changed since Sys V R2...
240: sys5r3:
241: make wermit "CFLAGS = -DSVR3 -DUXIII -DDEBUG -DTLOG -i -O" \
242: "LNKFLAGS = -i"
243:
244: #In case they type "make sys5"...
245: sys5:
246: make sys3
247:
248: #Generic ATT System III or System V (with I&D space)
249: sys3:
250: make wermit "CFLAGS = -DUXIII -DDEBUG -DTLOG -i -O" \
251: "LNKFLAGS = -i"
252:
253: #AT&T 7300 Unix PC
254: att7300:
255: make wermit "CFLAGS = -DUXIII -DATT7300 -DDEBUG -DTLOG -i -O" \
256: "LNKFLAGS = -i" \
257: "SHAREDLIB = /lib/crt0s.o /lib/shlib.ifile"
258:
259: #Generic ATT System III or System V (no I&D space)
260: sys3nid:
261: make wermit "CFLAGS = -DUXIII -DDEBUG -DTLOG -O" "LNKFLAGS ="
262:
263: #AT&T 3B-series computers running System V
264: # Only difference from sys3 is lock file stuff...
265: att3bx:
266: make wermit "CFLAGS = -DUXIII -DATT3BX -DDEBUG -DTLOG -i -O" \
267: "LNKFLAGS = -i"
268:
269: #HP 9000 series 300, 500, 800.
270: hpux:
271: make wermit "CFLAGS = -DUXIII -DHPUX -DDEBUG -DTLOG -O" "LNKFLAGS ="
272:
273: #Regulus on CIE Systems 680/20
274: cie:
275: make wermit "CFLAGS = -DUXIII -DCIE -DDEBUG -DTLOG -O" "LNKFLAGS ="
276:
277: #Microsoft "Xenix/286" e.g. for IBM PC/AT
278: xenix:
279: make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i" \
280: "LNKFLAGS = -F 3000 -i"
281:
282: #SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
283: sco286:
284: make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i -M2le" \
285: "LNKFLAGS = -F 3000 -i -M2le"
286:
287: #SCO Xenix 2.2.1 for IBM PC, XT, PS2/30, or other 8088 or 8086 machine
288: sco86:
289: make wermit "CFLAGS= -DXENIX -DUXIII -DDEBUG -DTLOG -F 3000 -i -Mle" \
290: "LNKFLAGS = -F 3000 -i -Mle"
291:
292: #PC/IX, Interactive Corp System III for IBM PC/XT
293: pcix:
294: make wermit \
295: "CFLAGS= -DPCIX -DUXIII -DISIII -DDEBUG -DTLOG -Dsdata=sdatax -O -i" \
296: "LNKFLAGS = -i"
297:
298:
299: #Interactive Corp System III port in general --
300: is3:
301: make wermit \
302: "CFLAGS = -DISIII -DUXIII -DDEBUG -DTLOG -Ddata=datax -O -i" \
303: "LNKFLAGS = -i"
304:
305:
306: #Masscomp System III
307: rtu:
308: make wermit "CFLAGS= -UFIONREAD -DUXIII -DDEBUG -DTLOG -O" \
309: "LNKFLAGS ="
310:
311: #DEC Pro-3xx with Pro/Venix V1.0 or V1.1
312: # Requires code-mapping on non-I&D-space 11/23 processor, plus some
313: # fiddling to get interrupt targets into resident code section.
314: provx1:
315: make wart "CFLAGS= -DPROVX1" "LNKFLAGS= "
316: make wermit "CFLAGS = -DPROVX1 -DDEBUG -DTLOG -md780" \
317: "LNKFLAGS= -u _sleep -lc -md780"
318:
319: #NCR Tower 1632, OS 1.02
320: tower1:
321: make wermit "CFLAGS= -DDEBUG -DTLOG -DTOWER1"
322:
323: #Fortune 32:16, For:Pro 1.8 (mostly like 4.1bsd)
324: ft18:
325: make wermit "CFLAGS= -DTLOG -DBSD4 -DFT18"
326:
327: #Valid Scaldstar
328: #Berkeleyish, but need to change some variable names.
329: valid:
330: make wermit "CFLAGS= -DBSD4 -Dcc=ccx -DFREAD=1"
331:
332: #IBM IX/370 on IBM 370 Series mainframes
333: #Mostly like sys3, but should buffer packets.
334: ix370:
335: make wermit "CFLAGS = -DIX370 -DUXIII -DDEBUG -DTLOG -i -O" \
336: "LNKFLAGS = -i"
337:
338: #Amdahl UTS 2.4 on IBM 370 series compatible mainframes.
339: #Mostly like V7, but can't do initrawq() buffer peeking.
340: uts24:
341: make wermit "CFLAGS=-DV7 -DDEBUG -DTLOG -DPROCNAME=\\\"$(PROC)\\\" \
342: -DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
343: -DNPTYPE=$(NPTYPE) $(DIRECT)"
344:
345: #BBN C/70 with IOS 2.0
346: #Mostly Berkeley-like, but with some ATTisms
347: c70:
348: make wermit "CFLAGS= -DBSD4 -DC70 -DDEBUG -DTLOG"
349:
350: #Zilog ZEUS 3.21
351: zilog:
352: make wermit "CFLAGS = -DUXIII -DZILOG -DTLOG -i -O" "LNKFLAGS = -i"
353:
354: #CDC VX/VE 5.2.1
355: vxve:
356: make wermit "CFLAGS = -DUXIII -DVXVE -i -O" "LNKFLAGS = -i"
357:
358: #Clean up intermediate and object files
359: clean:
360: -rm -f ckcmai.o ckucmd.o ckuusr.o ckuus2.o ckuus3.o ckcpro.o \
361: ckcfns.o ckcfn2.o ckucon.o ckutio.o ckufio.o ckudia.o ckuscr.o \
362: ckwart.o ckcpro.c
363:
364: #Run Lint on this mess for the BSD version.
365: lint:
366: -lint -x -DBSD4 -DDEBUG -DTLOG ck[cu]*.[hc] > ck.lint.bsd4
367:
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.