Return to README CVS log

Up to [Research Unix] / researchv10no / cmd / btree

Annotation of researchv10no/cmd/btree/README, revision 1.1

1.1     ! root        1: INSTALLING THE BTREE STUFF
        !             2: Acceptance testing -
        !             3: 1.  Put the distributed software in a testing directory.
        !             4:        Put the name of the directory in the LIB=  line in cbt.
        !             5:        make all. (If you are not on a vax, remove the -g CFLAG in makefile.)
        !             6:        (If your machine does not have ranlib, remove all references
        !             7:        to it from the makefile.)
        !             8: 2.  Run the verify shell script with various arguments.  I use
        !             9:        verify 10, verify 100, and verify 1000.  The last needs 3 minutes
        !            10:        of cpu time.
        !            11: 3.  Copy everything to its final directory.  Fix the CFLAGS line in
        !            12:        the makefile by removing -DTEST.  Change the LIB= line in cbt
        !            13:        to point to this directory.  Change the NDSZ definition after
        !            14:        #else in cbt.h to the size of a file system block on your system
        !            15:        (512 or 1024 or whatever).
        !            16: 4.  make clean
        !            17:        make all
        !            18:        Run the verify shell script to check that everything is still ok.
        !            19: 5.  make install

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.