Return to README CVS log

Up to [Research Unix] / researchv10no / cmd / btree

Annotation of researchv10no/cmd/btree/README, revision 1.1.1.1

1.1       root        1: INSTALLING THE BTREE STUFF
                      2: Acceptance testing -
                      3: 1.  Put the distributed software in a testing directory.
                      4:        Put the name of the directory in the LIB=  line in cbt.
                      5:        make all. (If you are not on a vax, remove the -g CFLAG in makefile.)
                      6:        (If your machine does not have ranlib, remove all references
                      7:        to it from the makefile.)
                      8: 2.  Run the verify shell script with various arguments.  I use
                      9:        verify 10, verify 100, and verify 1000.  The last needs 3 minutes
                     10:        of cpu time.
                     11: 3.  Copy everything to its final directory.  Fix the CFLAGS line in
                     12:        the makefile by removing -DTEST.  Change the LIB= line in cbt
                     13:        to point to this directory.  Change the NDSZ definition after
                     14:        #else in cbt.h to the size of a file system block on your system
                     15:        (512 or 1024 or whatever).
                     16: 4.  make clean
                     17:        make all
                     18:        Run the verify shell script to check that everything is still ok.
                     19: 5.  make install

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.