|
|
1.1 ! root 1: /* Copyright (c) 1981 Regents of the University of California */ ! 2: /* sccs id: @(#)ex_tune.h 7.3 9/3/81 */ ! 3: /* ! 4: * Definitions of editor parameters and limits ! 5: */ ! 6: ! 7: /* ! 8: * Pathnames. ! 9: * ! 10: * Only exstrings is looked at "+4", i.e. if you give ! 11: * "/usr/lib/..." here, "/lib" will be tried only for strings. ! 12: */ ! 13: #include "local/uparm.h" ! 14: #define EXRECOVER libpath(ex3.7recover) ! 15: #define EXPRESERVE libpath(ex3.7preserve) ! 16: #ifndef VMUNIX ! 17: #define EXSTRINGS libpath(ex3.7strings) ! 18: #endif ! 19: ! 20: /* ! 21: * If your system believes that tabs expand to a width other than ! 22: * 8 then your makefile should cc with -DTABS=whatever, otherwise we use 8. ! 23: */ ! 24: #ifndef TABS ! 25: #define TABS 8 ! 26: #endif ! 27: ! 28: /* ! 29: * Maximums ! 30: * ! 31: * The definition of LBSIZE should be the same as BUFSIZ (512 usually). ! 32: * Most other definitions are quite generous. ! 33: */ ! 34: /* FNSIZE is also defined in expreserve.c */ ! 35: #define FNSIZE 128 /* File name size */ ! 36: #ifdef VMUNIX ! 37: #define LBSIZE 1024 ! 38: #define ESIZE 512 ! 39: #define CRSIZE 1024 ! 40: #else ! 41: #ifdef u370 ! 42: #define LBSIZE 4096 ! 43: #define ESIZE 512 ! 44: #define CRSIZE 4096 ! 45: #else ! 46: #define LBSIZE 512 /* Line length */ ! 47: #define ESIZE 128 /* Size of compiled re */ ! 48: #define CRSIZE 512 ! 49: #endif ! 50: #endif ! 51: #define RHSSIZE 256 /* Size of rhs of substitute */ ! 52: #define NBRA 9 /* Number of re \( \) pairs */ ! 53: #define TAGSIZE 32 /* Tag length */ ! 54: #define ONMSZ 64 /* Option name size */ ! 55: #define GBSIZE 256 /* Buffer size */ ! 56: #define UXBSIZE 128 /* Unix command buffer size */ ! 57: #define VBSIZE 128 /* Partial line max size in visual */ ! 58: /* LBLKS is also defined in expreserve.c */ ! 59: #ifndef VMUNIX ! 60: #define LBLKS 125 /* Line pointer blocks in temp file */ ! 61: #define HBLKS 1 /* struct header fits in BUFSIZ*HBLKS */ ! 62: #else ! 63: #define LBLKS 900 ! 64: #define HBLKS 2 ! 65: #endif ! 66: #define MAXDIRT 12 /* Max dirtcnt before sync tfile */ ! 67: ! 68: /* Max entry size in termcap, see also termlib and termcap */ ! 69: #define TCBUFSIZE 1024 ! 70: ! 71: /* ! 72: * Except on VMUNIX, these are a ridiculously small due to the ! 73: * lousy arglist processing implementation which fixes core ! 74: * proportional to them. Argv (and hence NARGS) is really unnecessary, ! 75: * and argument character space not needed except when ! 76: * arguments exist. Argument lists should be saved before the "zero" ! 77: * of the incore line information and could then ! 78: * be reasonably large. ! 79: */ ! 80: #ifndef VMUNIX ! 81: #define NARGS 100 /* Maximum number of names in "next" */ ! 82: #define NCARGS LBSIZE /* Maximum arglist chars in "next" */ ! 83: #else ! 84: #define NCARGS 5120 ! 85: #define NARGS (NCARGS/6) ! 86: #endif ! 87: ! 88: /* ! 89: * Note: because the routine "alloca" is not portable, TUBESIZE ! 90: * bytes are allocated on the stack each time you go into visual ! 91: * and then never freed by the system. Thus if you have no terminals ! 92: * which are larger than 24 * 80 you may well want to make TUBESIZE ! 93: * smaller. TUBECOLS should stay at 160 since this defines the maximum ! 94: * length of opening on hardcopies and allows two lines of open on ! 95: * terminals like adm3's (glass tty's) where it switches to pseudo ! 96: * hardcopy mode when a line gets longer than 80 characters. ! 97: */ ! 98: #ifndef VMUNIX ! 99: #define TUBELINES 60 /* Number of screen lines for visual */ ! 100: #define TUBECOLS 160 /* Number of screen columns for visual */ ! 101: #define TUBESIZE 5000 /* Maximum screen size for visual */ ! 102: #else ! 103: #define TUBELINES 128 ! 104: #define TUBECOLS 160 ! 105: #define TUBESIZE (TUBELINES*TUBECOLS) ! 106: #endif ! 107: ! 108: /* ! 109: * Output column (and line) are set to this value on cursor addressible ! 110: * terminals when we lose track of the cursor to force cursor ! 111: * addressing to occur. ! 112: */ ! 113: #define UKCOL -20 /* Prototype unknown column */ ! 114: ! 115: /* ! 116: * Attention is the interrupt character (normally 0177 -- delete). ! 117: * Quit is the quit signal (normally FS -- control-\) and quits open/visual. ! 118: */ ! 119: #define ATTN (-2) /* mjm: (char) ?? */ ! 120: #define QUIT ('\\' & 037)
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.