|
|
1.1 ! root 1: lox deg ! 2: computes a loxodrome inclined at angle "deg" from ! 3: the equator; deg=45 for NE, deg=-45 for SE. ! 4: The loxodrome begins at lat,lon=0,0 and continues ! 5: through north latitudes. The output fields are: ! 6: phi latitude ! 7: x coord of developed loxodrome ! 8: y ditto ! 9: theta (east!) longitude of point on loxodrome ! 10: chi angle of inclination (slope) of developed loxodrome ! 11: Both theta and chi increase continuously (beyond 360) ! 12: ! 13: map loxodromic deg options ! 14: draws a map based on the developed loxodrome. The globe is ! 15: cut along the antipodal loxodrome and points are displayed ! 16: at true distance from the developed central loxodrome. ! 17: The usual map options apply. ! 18: Latitudes beyond 85 are deemed unplottable; higher latitudes ! 19: could be squeezed out in some instances. ! 20: ! 21: sh dolox deg options ! 22: makes the map with the boundary cut drawn. ! 23: If option -o is present, it must be first, and it should be ! 24: -o 90 ? ? (For uninvestigated reasons, the scale of an ! 25: off-axis projection comes out a bit wrong, so you have to ! 26: hand-tune the drawing of the boundaries, as has been done ! 27: in "sh noedge"; see the differing -p options there. One ! 28: contributor to the discrepancy: linear interpolation.) ! 29: ! 30: This projection uses the heavy artillery of a general ! 31: integrator and a general equation solver from the port 3 ! 32: library. This triples the size of the object code of map; ! 33: moreover it requires a corrected version of subroutine ds7grd, ! 34: not in the publicly available Port 3. Hence the loxodromic ! 35: projection is not normally included in "map".
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.