![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to caps CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [Research Unix] / researchv10no / ncurses / screen|
Return to caps CVS log | Up to [Research Unix] / researchv10no / ncurses / screen |
1.1 root 1: # @(#)caps 1.1 (1.19 10/31/82)
2: # Be sure to add new capabilties at the END of the appropriate section!
3: --- begin bool
4: auto_left_margin, "bw" "bw" cub1 wraps from column 0 to last column
5: auto_right_margin, "am" "am" Terminal has automatic margins
6: beehive_glitch, "xsb" "xb" Beehive (f1=escape, f2=ctrl C)
7: ceol_standout_glitch, "xhp" "xs" Standout not erased by overwriting (hp)
8: eat_newline_glitch, "xenl" "xn" newline ignored after 80 cols (Concept)
9: erase_overstrike, "eo" "eo" Can erase overstrikes with a blank
10: generic_type, "gn" "gn" Generic line type (e.g. dialup, switch).
11: hard_copy, "hc" "hc" Hardcopy terminal
12: has_meta_key, "km" "km" Has a meta key (shift, sets parity bit)
13: has_status_line, "hs" "hs" Has extra "status line"
14: insert_null_glitch, "in" "in" Insert mode distinguishes nulls
15: memory_above, "da" "da" Display may be retained above the screen
16: memory_below, "db" "db" Display may be retained below the screen
17: move_insert_mode, "mir" "mi" Safe to move while in insert mode
18: move_standout_mode, "msgr" "ms" Safe to move in standout modes
19: over_strike, "os" "os" Terminal overstrikes
20: status_line_esc_ok, "eslok" "es" Escape can be used on the status line
21: teleray_glitch, "xt" "xt" Tabs destructive, magic so char (t1061)
22: tilde_glitch, "hz" "hz" Hazeltine; can't print ~'s
23: transparent_underline, "ul" "ul" underline character overstrikes
24: xon_xoff, "xon" "xo" Terminal uses xon/xoff handshaking
25: # Add new Booleans before this line.
26: --- end bool
27:
28: --- begin num
29: columns, "cols" "co" Number of columns in a line
30: init_tabs, "it" "it" Tabs initially every # spaces.
31: lines, "lines" "li" Number of lines on screen or page
32: lines_of_memory, "lm" "lm" Lines of memory if > lines. 0 => varies
33: magic_cookie_glitch, "xmc" "sg" Number blank chars left by smso or rmso
34: padding_baud_rate, "pb" "pb" Lowest baud rate where padding needed
35: virtual_terminal, "vt" "vt" Virtual terminal number (CB/Unix)
36: width_status_line, "wsl" "ws" # columns in status line
37: # Add new numbers before this line.
38: --- end num
39:
40: --- begin str
41: back_tab, "cbt" "bt" Back tab (P)
42: bell, "bel" "bl" Audible signal (bell) (P)
43: carriage_return, "cr" "cr" Carriage return (P*)
44: change_scroll_region, "csr" "cs" change to lines #1 thru #2 (vt100) (PG)
45: clear_all_tabs, "tbc" "ct" Clear all tab stops. (P)
46: clear_screen, "clear" "cl" Clear screen (P*)
47: clr_eol, "el" "ce" Clear to end of line (P)
48: clr_eos, "ed" "cd" Clear to end of display (P*)
49: column_address, "hpa" "ch" Set cursor column (PG)
50: command_character, "cmdch" "CC" Term. settable cmd char in prototype
51: cursor_address, "cup" "cm" Cursor motion to row #1 col #2 (PG)
52: cursor_down, "cud1" "do" Down one line
53: cursor_home, "home" "ho" Home cursor (if no cup)
54: cursor_invisible, "civis" "vi" Make cursor invisible
55: cursor_left, "cub1" "le" Move cursor left one space.
56: cursor_mem_address, "mrcup" "CM" Memory relative cursor addressing.
57: cursor_normal, "cnorm" "ve" Make cursor appear normal (undo vs/vi)
58: cursor_right, "cuf1" "nd" Non-destructive space (cursor right)
59: cursor_to_ll, "ll" "ll" Last line, first column (if no cup)
60: cursor_up, "cuu1" "up" Upline (cursor up)
61: cursor_visible, "cvvis" "vs" Make cursor very visible
62: delete_character, "dch1" "dc" Delete character (P*)
63: delete_line, "dl1" "dl" Delete line (P*)
64: dis_status_line, "dsl" "ds" Disable status line
65: down_half_line, "hd" "hd" Half-line down (forward 1/2 linefeed)
66: enter_alt_charset_mode, "smacs" "as" Start alternate character set (P)
67: enter_blink_mode, "blink" "mb" Turn on blinking
68: enter_bold_mode, "bold" "md" Turn on bold (extra bright) mode
69: enter_ca_mode, "smcup" "ti" String to begin programs that use cup
70: enter_delete_mode, "smdc" "dm" Delete mode (enter)
71: enter_dim_mode, "dim" "mh" Turn on half-bright mode
72: enter_insert_mode, "smir" "im" Insert mode (enter);
73: enter_secure_mode, "invis" "mk" Turn on blank mode (chars invisible)
74: enter_protected_mode, "prot" "mp" Turn on protected mode
75: enter_reverse_mode, "rev" "mr" Turn on reverse video mode
76: enter_standout_mode, "smso" "so" Begin stand out mode
77: enter_underline_mode, "smul" "us" Start underscore mode
78: erase_chars, "ech" "ec" Erase #1 characters (PG)
79: exit_alt_charset_mode, "rmacs" "ae" End alternate character set (P)
80: exit_attribute_mode, "sgr0" "me" Turn off all attributes
81: exit_ca_mode, "rmcup" "te" String to end programs that use cup
82: exit_delete_mode, "rmdc" "ed" End delete mode
83: exit_insert_mode, "rmir" "ei" End insert mode;
84: exit_standout_mode, "rmso" "se" End stand out mode
85: exit_underline_mode, "rmul" "ue" End underscore mode
86: flash_screen, "flash" "vb" Visible bell (may not move cursor)
87: form_feed, "ff" "ff" Hardcopy terminal page eject (P*)
88: from_status_line, "fsl" "fs" Return from status line
89: init_1string, "is1" "i1" Terminal initialization string
90: init_2string, "is2" "is" Terminal initialization string
91: init_3string, "is3" "i2" Terminal initialization string
92: init_file, "if" "if" Name of file containing is
93: insert_character, "ich1" "ic" Insert character (P)
94: insert_line, "il1" "al" Add new blank line (P*)
95: insert_padding, "ip" "ip" Insert pad after character inserted (P*)
96: key_backspace, "kbs" "kb" Sent by backspace key
97: key_catab, "ktbc" "ka" Sent by clear-all-tabs key.
98: key_clear, "kclr" "kC" Sent by clear screen or erase key.
99: key_ctab, "kctab" "kt" Sent by clear-tab key
100: key_dc, "kdch1" "kD" Sent by delete character key.
101: key_dl, "kdl1" "kL" Sent by delete line key.
102: key_down, "kcud1" "kd" Sent by terminal down arrow key
103: key_eic, "krmir" "kM" Sent by rmir or smir in insert mode.
104: key_eol, "kel" "kE" Sent by clear-to-end-of-line key.
105: key_eos, "ked" "kS" Sent by clear-to-end-of-screen key.
106: key_f0, "kf0" "k0" Sent by function key f0.
107: key_f1, "kf1" "k1" Sent by function key f1.
108: key_f10, "kf10" "k;" Sent by function key f10.
109: key_f2, "kf2" "k2" Sent by function key f2.
110: key_f3, "kf3" "k3" Sent by function key f3.
111: key_f4, "kf4" "k4" Sent by function key f4.
112: key_f5, "kf5" "k5" Sent by function key f5.
113: key_f6, "kf6" "k6" Sent by function key f6.
114: key_f7, "kf7" "k7" Sent by function key f7.
115: key_f8, "kf8" "k8" Sent by function key f8.
116: key_f9, "kf9" "k9" Sent by function key f9.
117: key_home, "khome" "kh" Sent by home key.
118: key_ic, "kich1" "kI" Sent by ins char/enter ins mode key.
119: key_il, "kil1" "kA" Sent by insert line.
120: key_left, "kcub1" "kl" Sent by terminal left arrow key
121: key_ll, "kll" "kH" Sent by home-down key
122: key_npage, "knp" "kN" Sent by next-page key
123: key_ppage, "kpp" "kP" Sent by previous-page key
124: key_right, "kcuf1" "kr" Sent by terminal right arrow key
125: key_sf, "kind" "kF" Sent by scroll-forward/down key
126: key_sr, "kri" "kR" Sent by scroll-backward/up key
127: key_stab, "khts" "kT" Sent by set-tab key
128: key_up, "kcuu1" "ku" Sent by terminal up arrow key
129: keypad_local, "rmkx" "ke" Out of "keypad transmit" mode
130: keypad_xmit, "smkx" "ks" Put terminal in "keypad transmit" mode
131: lab_f0, "lf0" "l0" Labels on function key f0 if not f0
132: lab_f1, "lf1" "l1" Labels on function key f1 if not f1
133: lab_f10, "lf10" "la" Labels on function key f10 if not f10
134: lab_f2, "lf2" "l2" Labels on function key f2 if not f2
135: lab_f3, "lf3" "l3" Labels on function key f3 if not f3
136: lab_f4, "lf4" "l4" Labels on function key f4 if not f4
137: lab_f5, "lf5" "l5" Labels on function key f5 if not f5
138: lab_f6, "lf6" "l6" Labels on function key f6 if not f6
139: lab_f7, "lf7" "l7" Labels on function key f7 if not f7
140: lab_f8, "lf8" "l8" Labels on function key f8 if not f8
141: lab_f9, "lf9" "l9" Labels on function key f9 if not f9
142: meta_off, "rmm" "mo" Turn off "meta mode"
143: meta_on, "smm" "mm" Turn on "meta mode" (8th bit)
144: newline, "nel" "nw" Newline (behaves like cr followed by lf)
145: pad_char, "pad" "pc" Pad character (rather than null)
146: parm_dch, "dch" "DC" Delete #1 chars (PG*)
147: parm_delete_line, "dl" "DL" Delete #1 lines (PG*)
148: parm_down_cursor, "cud" "DO" Move cursor down #1 lines. (PG*)
149: parm_ich, "ich" "IC" Insert #1 blank chars (PG*)
150: parm_index, "indn" "SF" Scroll forward #1 lines. (PG)
151: parm_insert_line, "il" "AL" Add #1 new blank lines (PG*)
152: parm_left_cursor, "cub" "LE" Move cursor left #1 spaces (PG)
153: parm_right_cursor, "cuf" "RI" Move cursor right #1 spaces. (PG*)
154: parm_rindex, "rin" "SR" Scroll backward #1 lines. (PG)
155: parm_up_cursor, "cuu" "UP" Move cursor up #1 lines. (PG*)
156: pkey_key, "pfkey" "pk" Prog funct key #1 to type string #2
157: pkey_local, "pfloc" "pl" Prog funct key #1 to execute string #2
158: pkey_xmit, "pfx" "px" Prog funct key #1 to xmit string #2
159: print_screen, "mc0" "ps" Print contents of the screen
160: prtr_off, "mc4" "pf" Turn off the printer
161: prtr_on, "mc5" "po" Turn on the printer
162: repeat_char, "rep" "rp" Repeat char #1 #2 times. (PG*)
163: reset_1string, "rs1" "r1" Reset terminal completely to sane modes.
164: reset_2string, "rs2" "r2" Reset terminal completely to sane modes.
165: reset_3string, "rs3" "r3" Reset terminal completely to sane modes.
166: reset_file, "rf" "rf" Name of file containing reset string.
167: restore_cursor, "rc" "rc" Restore cursor to position of last sc.
168: row_address, "vpa" "cv" Like hpa but sets row. (PG)
169: save_cursor, "sc" "sc" Save cursor position. (P)
170: scroll_forward, "ind" "sf" Scroll text up (P)
171: scroll_reverse, "ri" "sr" Scroll text down (P)
172: set_attributes, "sgr" "sa" Define the video attributes (PG9)
173: set_tab, "hts" "st" Set a tab in all rows, current column.
174: set_window, "wind" "wi" Current window is lines #1-#2 cols #3-#4
175: tab, "ht" "ta" Tab to next 8 space hardware tab stop.
176: to_status_line, "tsl" "ts" Go to status line
177: underline_char, "uc" "uc" Underscore one char and move past it
178: up_half_line, "hu" "hu" Half-line up (reverse 1/2 linefeed)
179: init_prog, "iprog" "iP" Path name of program for init.
180: key_a1, "ka1" "K1" Upper left of keypad
181: key_a3, "ka3" "K3" Upper right of keypad
182: key_b2, "kb2" "K2" Center of keypad
183: key_c1, "kc1" "K4" Lower left of keypad
184: key_c3, "kc3" "K5" Lower right of keypad
185: prtr_non, "mc5p" "pO" Turn on the printer for #1 bytes.
186: # Add new strings before this line.
187: --- end str
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.