Return to hp.ti CVS log

Up to [Research Unix] / researchv10no / ncurses / terminfo

Annotation of researchv10no/ncurses/terminfo/hp.ti, revision 1.1

1.1     ! root        1: # # --------------------------------
        !             2: #      @(#)hp.ti       1.2     (1.15   2/2/83)
        !             3: #
        !             4: # hp: HEWLETT PACKARD
        !             5: #
        !             6: # Note: no "home" on HP's since that homes to top of memory, not screen.
        !             7: # Due to 2621 limitations, the only way to get the arrow keys to
        !             8: # transmit anything at all is to turn on the function key labels
        !             9: # (f1-f8) with smkx, and even then the user has to hold down shift!
        !            10: # The default 2621 turns off the labels except when it has to to enable
        !            11: # the function keys.  If your installation prefers labels on all the time,
        !            12: # or off all the time (at the "expense" of the function keys) move the
        !            13: # 2621-nl or 2621-wl labels to the front using reorder.
        !            14: # Note: there are newer ROM's for 2621's that allow you to set strap A
        !            15: # so the regular arrow keys xmit \EA, etc, as with the 2645.  However,
        !            16: # even with this strap set, the terminal stops xmitting if you reset it.
        !            17: # Since I know of no way to set/unset
        !            18: # the strap with an escape sequence, we don't use it in the default.
        !            19: # If you like, you can use 2621-ba ("limited" arrow keys).
        !            20: hp2621-ba|2621-ba|2621 w/new rom and strap A set,
        !            21:        smkx@, rmkx@,
        !            22:        kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh, use=hp2621,
        !            23: # 2621 with labels on all the time - normal outside vi, function inside vi.
        !            24: hp2621-wl|2621-wl|2621|hp2621|hp 2621 w/labels,
        !            25:        is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl,
        !            26: # 2621 with function labels.  Most of the time they are off,
        !            27: # but inside vi, the function key labels appear.  You have to
        !            28: # hold down shift to get them to xmit.
        !            29: hp2621-fl|2621|hp2621|hp2621a|2621a|2621-fl|2621A|hp 2621,
        !            30:        is2=\E&j@\r, cbt=\Ei, cup=\E&a%p2%dc%p1%dY,
        !            31:        dch1=\EP$<2>, ip=$<2>, pb#19200,
        !            32:        smso=\E&dD, rmso=\E&d@, smul=\E&dD, rmul=\E&d@, sgr0=\E&d@, xhp@,
        !            33:        khome=\Ep\r, kcuu1=\Et\r, kcub1=\Eu\r, kcuf1=\Ev\r, kcud1=\Ew\r,
        !            34:        kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r,
        !            35:        kf7=\Ev\r, kf8=\Ew\r, smkx=\E&jB, rmkx=\E&j@, ht=^I$<2>, xon, use=hp,
        !            36: # To use 2621p printer, setenv TERM=2621p, PRINTER=2612p
        !            37: hp2621p|2621p|2621P|hp 2621 with printer,
        !            38:        mc5=\E&p11C, mc4=\E&p13C, use=2621,
        !            39: # 2621k45: untested
        !            40: 2621k45|hp2621k45|k45|hp 2621 with 45 keyboard,
        !            41:        kbs=^H, kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
        !            42:        smkx=\E&s1A, rmkx=\E&s0A, use=2621,
        !            43: # This terminal should be used at 4800 baud or less.  It needs padding for
        !            44: # plain characters at 9600, I guessed at an appropriate cr delay.
        !            45: # It really wants ^E/^F handshaking, but that doesn't work well even if
        !            46: # you write software to support it.
        !            47: 2645|hp2645|hp45|hp 264x series,
        !            48:        dim=\E&dH, rev=\E&dB, smul=\E&dD, blink=\E&dA, sgr0=\E&d@,
        !            49:        sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%?%p5%t%'H'%|%;%?%p6%t%'B'%|%;%c,
        !            50:        kcuu1=\EA, kcud1=\EB, kcub1=\ED, kcuf1=\EC, khome=\Eh,
        !            51:        smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET, kind=\ES,
        !            52:        kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
        !            53:        kel=\EK, ked=\EJ, krmir=\ER, pb#9600, cr=^M$<20>, use=hp,
        !            54: hp|hewlett-packard,
        !            55:        tbc=\E3, hts=\E1, cr=^M, cud1=^J, ind=^J, bel=^G, il1=\EL, am, cub1=^H,
        !            56:        ed=\EJ, el=\EK, hpa=\E&a%p1%dC, clear=\EH\EJ,
        !            57:        cup=\E&a%p2%dc%p1%dY$<6>, cols#80, vpa=\E&a%p1%dY, lm#0, da, db,
        !            58:        dch1=\EP, dl1=\EM, rmir=\ER, smir=\EQ, kbs=^H, lines#24, mir,
        !            59:        cuf1=\EC, ht=^I, rmso=\E&d@, smso=\E&dJ,
        !            60:        smul=\E&dD, rmul=\E&d@, cuu1=\EA, xhp, vt#6,
        !            61: # The 2622 and 2623 are untested and based on telephone reports.
        !            62: # Rumor has it they clear your tabs when you exit vi.
        !            63: hp2622|hp2622a|2622|2622a|hp 2622,
        !            64:        ed=\EJ, use=2626,
        !            65: # The 2623 is a 2622 with extra graphics hardware.
        !            66: hp2623|hp2623a|2623|2623a|hp 2623,
        !            67:        use=2622,
        !            68: # This entry does not use any of the fancy windowing stuff of the 2626.
        !            69: # Indeed, terminfo does not yet handle such stuff.  Since changing any window
        !            70: # clears memory, it is probably not possible to use this for screen opt.
        !            71: # ed is incredibly slow most of the time - I am guessing at the exact padding.
        !            72: # Since the terminal uses xoff/xon this is intended only for cost computation,
        !            73: # so that the terminal will prefer el or even dl1 which is probably faster!
        !            74: # \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only extra slow
        !            75: # on the last line of the window.  The padding probably should be changed.
        !            76: hp2626|hp2626a|hp2626p|2626|2626a|2626p|2626A|2626P|hp 2626,
        !            77:        dch1=\EP$<2>, ip=$<2>, rmso=\E&d@, smso=\E&dB, ed=\ED\EJ$<500>\EC,
        !            78:        rev=\E&dB, smul=\E&dD, blink=\E&dA, invis=\E&dS, sgr0=\E&d@, rmul=\E&d@,
        !            79:        sgr=\E&d%'@'%?%p1%t%'B'%|%;%?%p2%t%'D'%|%;%?%p3%t%'B'%|%;%?%p4%t%'A'%|%;%c,
        !            80:        khome=\Eh, kcuu1=\EA, kcub1=\ED, kcuf1=\EC, kcud1=\EB,
        !            81:        smkx=\E&s1A, rmkx=\E&s0A, knp=\EU, kpp=\EV, kri=\ET,
        !            82:        kind=\ES, kil1=\EL, kdl1=\EM, kich1=\EQ, kdch1=\EP,
        !            83:        kel=\EK, ked=\EJ, krmir=\ER,
        !            84:        ind=\ES, ht=^I$<2>, xhp, use=2621,
        !            85: # This entry is for sysline.  It allocates a 23 line window with a 115 line
        !            86: # workspace for regular use, and a 1 line window for the status line.
        !            87: # This assumes port 2 is being used.
        !            88: # Turn off horizontal line, Create ws #1 with 115 lines,
        !            89: # Create ws #2 with 1 line, Create window #1 lines 1-23,
        !            90: # Create window #2 lines 24-24, Attach cursor to workspace #1.
        !            91: # Note that this clears the tabs so it must be done by tset before
        !            92: # it sets the tabs.
        !            93: 2626-s|hp 2626 using only 23 lines,
        !            94:        tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC,
        !            95:        fsl=\E&d@\E&w7f2p1I\E&w4f1I, eslok, hs,
        !            96:        is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I
        !            97:        \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r,
        !            98:        lines#23, use=2626,
        !            99: # Force terminal back to 24 lines after being 23.
        !           100: 2626-ns|hp 2626 using all 24 lines,
        !           101:        is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I
        !           102:        \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r,
        !           103:        use=2626,
        !           104: # Various entries useful for small windows on 2626.
        !           105: 2626-12,
        !           106:        lines#12, use=2626,
        !           107: 2626-12x40,
        !           108:        cols#40, lines#12, use=2626,
        !           109: 2626-x40,
        !           110:        cols#40, use=2626,
        !           111: 2626-12-s,
        !           112:        lines#11, use=2626-s,
        !           113: # You should use this terminal at 4800 baud or less.
        !           114: hp2648|hp2648a|2648a|2648A|2648|HP 2648a graphics terminal,
        !           115:        clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>,
        !           116:        dch1=\EP$<7>, ip=$<5>, use=2645,
        !           117: # 2640a doesn't have the Y cursor addressing feature, and C is memory relative
        !           118: # instead of screen relative, as we need.
        !           119: 2640|hp2640a|2640a|hp 2640a,
        !           120:        cup@, smkx@, rmkx@, use=2645,
        !           121: 2640b|hp2640b|2644a|hp2644a|hp 264x series,
        !           122:        smkx@, rmkx@, use=2645,
        !           123: # 2621 using all 48 lines of memory, only 24 visible at any time.  Untested.
        !           124: 2621-48|48 line 2621,
        !           125:        vpa=\E&a%p1%dR, lines#48, home=\EH, cup=\E&a%p2%dc%p1%dR, use=2621,
        !           126: # 2621 with no labels ever.  Also prevents vi delays on escape.
        !           127: hp2621-nl|2621-nl|2621|hp2621|hp 2621 with no labels,
        !           128:        smkx@, rmkx@, khome@, kcuu1@, kcub1@, kcuf1@, kcud1@, use=hp2621-fl,
        !           129: # Needed for UCB ARPAVAX console, since lsi-11 expands tabs (wrong).
        !           130: hp2621-nt|2621-nt|hp 2621 w/no tabs,
        !           131:        ht@, use=hp2621,

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.