Return to flp.h CVS log

Up to [Research Unix] / researchv9 / sys.vax / h

Annotation of researchv9/sys.vax/h/flp.h, revision 1.1.1.1

1.1       root        1: #if VAX780
                      2: /*
                      3:  * Console floppy command/status and sectoring information.
                      4:  */
                      5: #define        FL_FFC          0x200           /* floppy function complete */
                      6: #define        FL_ERR          0x80            /* error bit in floppy status byte */
                      7: #define        FL_PERR         0x905           /* floppy protocol error */
                      8: #define        FL_DATA         0x100           /* floppy data select code */
                      9: #define        FL_RS           0x900           /* floppy read sector command */
                     10: #define        FL_WS           0x901           /* floppy write sector command*/
                     11: #define        FL_STAT         0x902           /* floppy get status command*/
                     12: #define        FL_CANCEL       0x904           /* cancel floppy function */
                     13: 
                     14: #define        RXFTRK  77              /* tracks/floppy */
                     15: #define        RXSTRK  26              /* sectors/track */
                     16: #define        RXBYSEC 128             /* bytes/sector */
                     17: #define        MAXSEC (RXFTRK*RXSTRK)  /* sectors/floppy */
                     18: 
                     19: /*
                     20:  * In the floppy driver routines, the device active byte is used
                     21:  * not as a boolean, but as an indicator of the state we are in.
                     22:  * That is, it contains what to do on the next interrupt.
                     23:  */
                     24: 
                     25: #define        FL_IDLE         0       /* floppy idle */
                     26: #define        FL_MAND         1       /* about to send read/write command */
                     27: #define        FL_SEC          2       /* about to send sector # to LSI */
                     28: #define        FL_TRACK        3       /* about to send track # to LSI */
                     29: #define        FL_DAX          4       /* transmitting data */
                     30: #define        FL_DAR          5       /* receiving data */
                     31: #define        FL_COM          6       /* completing transmission */
                     32: #define        FL_CAN          7       /* give cancel order - we had an error,
                     33:                                   and are to restart */
                     34: 
                     35: #define        FLERRS          5       /* number of retries before quitting */
                     36: 
                     37: /*
                     38:  * The state byte is used to retain exclusivity,
                     39:  * and contains the busy flag.
                     40:  */
                     41: #define        FL_OPEN         1
                     42: #define        FL_BUSY         2
                     43: #endif

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.