--- sbbs/sbbs2/scfg/scfgxfr1.c	2018/04/24 16:37:52	1.1
+++ sbbs/sbbs2/scfg/scfgxfr1.c	2018/04/24 16:39:17	1.1.1.2
@@ -1,976 +1,976 @@
-#line 2 "SCFGXFR1.C"
-
-/* Developed 1990-1997 by Rob Swindell; PO Box 501, Yorba Linda, CA 92885 */
-
-#include "scfg.h"
-
-void xfer_opts()
-{
-	static int xfr_dflt;
-	char str[81],done;
-	int i,j,k,l,dflt,bar;
-	static fextr_t savfextr;
-	static fview_t savfview;
-	static ftest_t savftest;
-	static fcomp_t savfcomp;
-	static prot_t savprot;
-	static dlevent_t savdlevent;
-	static char savaltpath[LEN_DIR+1];
-
-while(1) {
-	i=0;
-	sprintf(opt[i++],"%-33.33s%uk","Min Bytes Free Disk Space",min_dspace);
-	sprintf(opt[i++],"%-33.33s%u","Max Files in Batch UL Queue"
-		,max_batup);
-	sprintf(opt[i++],"%-33.33s%u","Max Files in Batch DL Queue"
-		,max_batdn);
-	sprintf(opt[i++],"%-33.33s%u","Max Users in User Transfers",max_userxfer);
-	sprintf(opt[i++],"%-33.33s%u%%","Default Credit on Upload"
-		,cdt_up_pct);
-	sprintf(opt[i++],"%-33.33s%u%%","Default Credit on Download"
-		,cdt_dn_pct);
-	if(leech_pct)
-		sprintf(str,"%u%% after %u seconds",leech_pct,leech_sec);
-	else
-		strcpy(str,"Disabled");
-	sprintf(opt[i++],"%-33.33s%s","Leech Protocol Detection",str);
-	strcpy(opt[i++],"Viewable Files...");
-	strcpy(opt[i++],"Testable Files...");
-	strcpy(opt[i++],"Download Events...");
-	strcpy(opt[i++],"Extractable Files...");
-	strcpy(opt[i++],"Compressable Files...");
-	strcpy(opt[i++],"Transfer Protocols...");
-	strcpy(opt[i++],"Alternate File Paths...");
-	opt[i][0]=0;
-	SETHELP(WHERE);
-/*
-
File Transfer Configuration:

-
-This menu has options and sub-menus that pertain specifically to the
-file transfer section of the BBS.
-*/
-	switch(ulist(WIN_ORG|WIN_ACT|WIN_CHE,0,0,72,&xfr_dflt,0
-		,"File Transfer Configuration",opt)) {
-		case -1:
-			i=save_changes(WIN_MID);
-			if(i==-1)
-				break;
-			if(!i)
-				write_file_cfg();
-            return;
-		case 0:
-			SETHELP(WHERE);
-/*
-
Minimum Kilobytes Free Disk Space to Allow Uploads:

-
-This is the minimum free space in a file directory to allow user
-uploads.
-*/
-			uinput(WIN_MID,0,0
-				,"Minimum Kilobytes Free Disk Space to Allow Uploads"
-				,itoa(min_dspace,tmp,10),5,K_EDIT|K_NUMBER);
-			min_dspace=atoi(tmp);
-			break;
-		case 1:
-			SETHELP(WHERE);
-/*
-
Maximum Files in Batch Upload Queue:

-
-This is the maximum number of files that can be placed in the batch
-upload queue.
-*/
-			uinput(WIN_MID,0,0,"Maximum Files in Batch Upload Queue"
-				,itoa(max_batup,tmp,10),5,K_EDIT|K_NUMBER);
-			max_batup=atoi(tmp);
-            break;
-		case 2:
-			SETHELP(WHERE);
-/*
-
Maximum Files in Batch Download Queue:

-
-This is the maximum number of files that can be placed in the batch
-download queue.
-*/
-			uinput(WIN_MID,0,0,"Maximum Files in Batch Download Queue"
-				,itoa(max_batdn,tmp,10),5,K_EDIT|K_NUMBER);
-			max_batdn=atoi(tmp);
-            break;
-		case 3:
-			SETHELP(WHERE);
-/*
-
Maximum Destination Users in User to User Transfer:

-
-This is the maximum number of users allowed in the destination user list
-of a user to user upload.
-*/
-			uinput(WIN_MID,0,0
-				,"Maximum Destination Users in User to User Transfers"
-				,itoa(max_userxfer,tmp,10),5,K_EDIT|K_NUMBER);
-			max_userxfer=atoi(tmp);
-			break;
-		case 4:
-SETHELP(WHERE);
-/*
-
Default Percentage of Credits to Credit Uploader on Upload:

-
-This is the default setting that will be used when new file
-directories are created.
-*/
-			uinput(WIN_MID,0,0
-				,"Default Percentage of Credits to Credit Uploader on Upload"
-				,itoa(cdt_up_pct,tmp,10),4,K_EDIT|K_NUMBER);
-			cdt_up_pct=atoi(tmp);
-			break;
-		case 5:
-SETHELP(WHERE);
-/*
-
Default Percentage of Credits to Credit Uploader on Download:

-
-This is the default setting that will be used when new file
-directories are created.
-*/
-			uinput(WIN_MID,0,0
-				,"Default Percentage of Credits to Credit Uploader on Download"
-				,itoa(cdt_dn_pct,tmp,10),4,K_EDIT|K_NUMBER);
-			cdt_dn_pct=atoi(tmp);
-			break;
-		case 6:
-			SETHELP(WHERE);
-/*
-
Leech Protocol Detection Percentage:

-
-This value is the sensitivity of the leech protocol detection feature of
-Synchronet. If the transfer is apparently unsuccessful, but the transfer
-time was at least this percentage of the estimated transfer time (based
-on the estimated CPS of the connection result code), then a leech
-protocol error is issued and the user's leech download counter is
-incremented. Setting this value to 
0
 disables leech protocol detection.
-*/
-			savnum=0;
-			uinput(WIN_MID|WIN_SAV,0,0
-				,"Leech Protocol Detection Percentage (0=Disabled)"
-				,itoa(leech_pct,tmp,10),3,K_EDIT|K_NUMBER);
-			leech_pct=atoi(tmp);
-			if(!leech_pct)
-				break;
-			SETHELP(WHERE);
-/*
-
Leech Protocol Minimum Time (in Seconds):

-
-This option allows you to adjust the sensitivity of the leech protocol
-detection feature. This value is the minimum length of transfer time
-(in seconds) that must elapse before an aborted tranfser will be
-considered a possible leech attempt.
-*/
-			uinput(WIN_MID,0,0
-				,"Leech Protocol Minimum Time (in Seconds)"
-				,itoa(leech_sec,tmp,10),3,K_EDIT|K_NUMBER);
-			leech_sec=atoi(tmp);
-			break;
-		case 7: 	/* Viewable file types */
-			dflt=bar=0;
-			while(1) {
-				for(i=0;i<total_fviews && i<MAX_OPTS;i++)
-					sprintf(opt[i],"%-3.3s  %-40s",fview[i]->ext,fview[i]->cmd);
-				opt[i][0]=0;
-				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
-				if(total_fviews<MAX_OPTS)
-					i|=WIN_INS;
-				if(total_fviews)
-					i|=WIN_DEL|WIN_GET;
-				if(savfview.cmd[0])
-					i|=WIN_PUT;
-				savnum=0;
-				SETHELP(WHERE);
-/*
-
Viewable File Types:

-
-This is a list of file types that have content information that can be
-viewed through the execution of an external program. Here are a couple of
-command line examples for a few file types.
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"Viewable File Types",opt);
-				if(i==-1)
-					break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-					FREE(fview[i]);
-					total_fviews--;
-					while(i<total_fviews) {
-						fview[i]=fview[i+1];
-						i++; }
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((fview=(fview_t **)REALLOC(fview
-						,sizeof(fview_t *)*(total_fviews+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,total_fviews+1);
-						total_fviews=0;
-						bail(1);
-						continue; }
-					if(!total_fviews) {
-						if((fview[0]=(fview_t *)MALLOC(
-							sizeof(fview_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fview_t));
-							continue; }
-						memset(fview[0],0,sizeof(fview_t));
-						strcpy(fview[0]->ext,"ZIP");
-						strcpy(fview[0]->cmd,"%!pkunzip -v %f"); }
-					else {
-						for(j=total_fviews;j>i;j--)
-							fview[j]=fview[j-1];
-						if((fview[i]=(fview_t *)MALLOC(
-							sizeof(fview_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fview_t));
-							continue; }
-						*fview[i]=*fview[i+1]; }
-					total_fviews++;
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-					savfview=*fview[i];
-					continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-					*fview[i]=savfview;
-					changes=1;
-					continue; }
-				k=0;
-				done=0;
-				while(!done) {
-					j=0;
-					sprintf(opt[j++],"%-22.22s%s","File Extension"
-						,fview[i]->ext);
-					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
-						,fview[i]->cmd);
-					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
-						,fview[i]->ar);
-					opt[j][0]=0;
-					savnum=1;
-					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
-						,"Viewable File Type",opt)) {
-						case -1:
-							done=1;
-							break;
-						case 0:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Viewable File Type Extension"
-								,fview[i]->ext,3,K_UPPER|K_EDIT);
-							break;
-						case 1:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Command Line"
-								,fview[i]->cmd,50,K_EDIT);
-							break;
-						case 2:
-							savnum=2;
-							sprintf(str,"Viewable File Type %s"
-								,fview[i]->ext);
-							getar(str,fview[i]->ar);
-                            break; } } }
-            break;
-		case 8:    /* Testable file types */
-			dflt=bar=0;
-			while(1) {
-				for(i=0;i<total_ftests && i<MAX_OPTS;i++)
-					sprintf(opt[i],"%-3.3s  %-40s",ftest[i]->ext,ftest[i]->cmd);
-				opt[i][0]=0;
-				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
-				if(total_ftests<MAX_OPTS)
-					i|=WIN_INS;
-				if(total_ftests)
-					i|=WIN_DEL|WIN_GET;
-				if(savftest.cmd[0])
-					i|=WIN_PUT;
-				savnum=0;
-				SETHELP(WHERE);
-/*
-
Testable File Types:

-
-This is a list of file types that will have a command line executed to
-test the file integrity upon their upload. The file types are specified
-by 
extension
 and if one file extension is listed more than once, each
-command line will be executed. The command lines must return a DOS error
-code of 0 (no error) in order for the file to pass the test. This method
-of file testing upon upload is also known as an upload event. This test
-or event, can do more than just test the file, it can perform any
-function that the sysop wishes. Such as adding comments to an archived
-file, or extracting an archive and performing a virus scan. While the
-external program is executing, a text string is displayed to the user.
-This 
working string
 can be set for each file type and command line
-listed.
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"Testable File Types",opt);
-				if(i==-1)
-					break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-					FREE(ftest[i]);
-					total_ftests--;
-					while(i<total_ftests) {
-						ftest[i]=ftest[i+1];
-						i++; }
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((ftest=(ftest_t **)REALLOC(ftest
-						,sizeof(ftest_t *)*(total_ftests+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,total_ftests+1);
-						total_ftests=0;
-						bail(1);
-						continue; }
-					if(!total_ftests) {
-						if((ftest[0]=(ftest_t *)MALLOC(
-							sizeof(ftest_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(ftest_t));
-							continue; }
-						memset(ftest[0],0,sizeof(ftest_t));
-						strcpy(ftest[0]->ext,"ZIP");
-						strcpy(ftest[0]->cmd,"%!pkunzip -t %f");
-						strcpy(ftest[0]->workstr,"Testing ZIP Integrity..."); }
-					else {
-
-						for(j=total_ftests;j>i;j--)
-							ftest[j]=ftest[j-1];
-						if((ftest[i]=(ftest_t *)MALLOC(
-							sizeof(ftest_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(ftest_t));
-							continue; }
-						*ftest[i]=*ftest[i+1]; }
-					total_ftests++;
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-					savftest=*ftest[i];
-					continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-					*ftest[i]=savftest;
-					changes=1;
-					continue; }
-				done=0;
-				k=0;
-				while(!done) {
-					j=0;
-					sprintf(opt[j++],"%-22.22s%s","File Extension"
-						,ftest[i]->ext);
-					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
-						,ftest[i]->cmd);
-					sprintf(opt[j++],"%-22.22s%s","Working String"
-						,ftest[i]->workstr);
-					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
-						,ftest[i]->ar);
-					opt[j][0]=0;
-					savnum=1;
-					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
-						,"Testable File Type",opt)) {
-						case -1:
-							done=1;
-							break;
-						case 0:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Testable File Type Extension"
-								,ftest[i]->ext,3,K_UPPER|K_EDIT);
-							break;
-						case 1:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Command Line"
-								,ftest[i]->cmd,50,K_EDIT);
-							break;
-						case 2:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Working String"
-								,ftest[i]->workstr,40,K_EDIT|K_MSG);
-							break;
-						case 3:
-							savnum=2;
-							sprintf(str,"Testable File Type %s",ftest[i]->ext);
-							getar(str,ftest[i]->ar);
-							break; } } }
-			break;
-		case 9:    /* Download Events */
-			dflt=bar=0;
-			while(1) {
-				for(i=0;i<total_dlevents && i<MAX_OPTS;i++)
-					sprintf(opt[i],"%-3.3s  %-40s",dlevent[i]->ext,dlevent[i]->cmd);
-				opt[i][0]=0;
-				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
-				if(total_dlevents<MAX_OPTS)
-					i|=WIN_INS;
-				if(total_dlevents)
-					i|=WIN_DEL|WIN_GET;
-				if(savdlevent.cmd[0])
-					i|=WIN_PUT;
-				savnum=0;
-				SETHELP(WHERE);
-/*
-
Download Events:

-
-This is a list of file types that will have a command line executed to
-perform an event upon their download (e.g. trigger a download event).
-The file types are specified by 
extension
 and if one file extension
-is listed more than once, each command line will be executed. The
-command lines must return a DOS error code of 0 (no error) in order
-for the file to pass the test. This test or event, can do more than
-just test the file, it can perform any function that the sysop wishes.
-Such as adding comments to an archived file, or extracting an archive
-and performing a virus scan. While the external program is executing,
-a text string is displayed to the user. This 
working string
 can be set
-for each file type and command line listed.
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"Download Events",opt);
-				if(i==-1)
-					break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-					FREE(dlevent[i]);
-					total_dlevents--;
-					while(i<total_dlevents) {
-						dlevent[i]=dlevent[i+1];
-						i++; }
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((dlevent=(dlevent_t **)REALLOC(dlevent
-						,sizeof(dlevent_t *)*(total_dlevents+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,total_dlevents+1);
-						total_dlevents=0;
-						bail(1);
-						continue; }
-					if(!total_dlevents) {
-						if((dlevent[0]=(dlevent_t *)MALLOC(
-							sizeof(dlevent_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(dlevent_t));
-							continue; }
-						memset(dlevent[0],0,sizeof(dlevent_t));
-						strcpy(dlevent[0]->ext,"ZIP");
-						strcpy(dlevent[0]->cmd,"%!pkzip -z %f "
-							"< ..\\text\\zipmsg.txt");
-						strcpy(dlevent[0]->workstr,"Adding ZIP Comment..."); }
-					else {
-
-						for(j=total_dlevents;j>i;j--)
-							dlevent[j]=dlevent[j-1];
-						if((dlevent[i]=(dlevent_t *)MALLOC(
-							sizeof(dlevent_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(dlevent_t));
-							continue; }
-						*dlevent[i]=*dlevent[i+1]; }
-					total_dlevents++;
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-					savdlevent=*dlevent[i];
-					continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-					*dlevent[i]=savdlevent;
-					changes=1;
-					continue; }
-				done=0;
-				k=0;
-				while(!done) {
-					j=0;
-					sprintf(opt[j++],"%-22.22s%s","File Extension"
-						,dlevent[i]->ext);
-					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
-						,dlevent[i]->cmd);
-					sprintf(opt[j++],"%-22.22s%s","Working String"
-						,dlevent[i]->workstr);
-					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
-						,dlevent[i]->ar);
-					opt[j][0]=0;
-					savnum=1;
-					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
-						,"Download Event",opt)) {
-						case -1:
-							done=1;
-							break;
-						case 0:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Download Event Extension"
-								,dlevent[i]->ext,3,K_UPPER|K_EDIT);
-							break;
-						case 1:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Command Line"
-								,dlevent[i]->cmd,50,K_EDIT);
-							break;
-						case 2:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Working String"
-								,dlevent[i]->workstr,40,K_EDIT|K_MSG);
-							break;
-						case 3:
-							savnum=2;
-							sprintf(str,"Download Event %s",dlevent[i]->ext);
-							getar(str,dlevent[i]->ar);
-							break; } } }
-            break;
-		case 10:	 /* Extractable file types */
-			dflt=bar=0;
-            while(1) {
-				for(i=0;i<total_fextrs && i<MAX_OPTS;i++)
-                    sprintf(opt[i],"%-3.3s  %-40s"
-                        ,fextr[i]->ext,fextr[i]->cmd);
-				opt[i][0]=0;
-                i=WIN_ACT|WIN_SAV;  /* save cause size can change */
-				if(total_fextrs<MAX_OPTS)
-                    i|=WIN_INS;
-                if(total_fextrs)
-                    i|=WIN_DEL|WIN_GET;
-				if(savfextr.cmd[0])
-                    i|=WIN_PUT;
-                savnum=0;
-                SETHELP(WHERE);
-/*
-
Extractable File Types:

-
-This is a list of archive file types that can be extracted to the temp
-directory by an external program. The file types are specified by their
-extension. For each file type you must specify the command line used to
-extract the file(s).
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"Extractable File Types",opt);
-                if(i==-1)
-                    break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-                    FREE(fextr[i]);
-                    total_fextrs--;
-                    while(i<total_fextrs) {
-                        fextr[i]=fextr[i+1];
-                        i++; }
-                    changes=1;
-                    continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((fextr=(fextr_t **)REALLOC(fextr
-						,sizeof(fextr_t *)*(total_fextrs+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,total_fextrs+1);
-						total_fextrs=0;
-						bail(1);
-						continue; }
-                    if(!total_fextrs) {
-                        if((fextr[0]=(fextr_t *)MALLOC(
-                            sizeof(fextr_t)))==NULL) {
-                            errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fextr_t));
-                            continue; }
-						memset(fextr[0],0,sizeof(fextr_t));
-                        strcpy(fextr[0]->ext,"ZIP");
-                        strcpy(fextr[0]->cmd,"%!pkunzip -o %f %g %s"); }
-                    else {
-
-                        for(j=total_fextrs;j>i;j--)
-                            fextr[j]=fextr[j-1];
-                        if((fextr[i]=(fextr_t *)MALLOC(
-                            sizeof(fextr_t)))==NULL) {
-                            errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fextr_t));
-                            continue; }
-                        *fextr[i]=*fextr[i+1]; }
-                    total_fextrs++;
-                    changes=1;
-                    continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-                    savfextr=*fextr[i];
-                    continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-                    *fextr[i]=savfextr;
-                    changes=1;
-                    continue; }
-				k=0;
-				done=0;
-				while(!done) {
-					j=0;
-					sprintf(opt[j++],"%-22.22s%s","File Extension"
-						,fextr[i]->ext);
-					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
-						,fextr[i]->cmd);
-					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
-						,fextr[i]->ar);
-					opt[j][0]=0;
-					savnum=1;
-					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
-						,"Extractable File Type",opt)) {
-						case -1:
-							done=1;
-							break;
-						case 0:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Extractable File Type Extension"
-								,fextr[i]->ext,3,K_UPPER|K_EDIT);
-							break;
-						case 1:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Command Line"
-								,fextr[i]->cmd,50,K_EDIT);
-							break;
-						case 2:
-							savnum=2;
-							sprintf(str,"Extractable File Type %s"
-								,fextr[i]->ext);
-							getar(str,fextr[i]->ar);
-                            break; } } }
-            break;
-		case 11:	 /* Compressable file types */
-			dflt=bar=0;
-			while(1) {
-				for(i=0;i<total_fcomps && i<MAX_OPTS;i++)
-					sprintf(opt[i],"%-3.3s  %-40s",fcomp[i]->ext,fcomp[i]->cmd);
-				opt[i][0]=0;
-				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
-				if(total_fcomps<MAX_OPTS)
-					i|=WIN_INS;
-				if(total_fcomps)
-					i|=WIN_DEL|WIN_GET;
-				if(savfcomp.cmd[0])
-					i|=WIN_PUT;
-				savnum=0;
-				SETHELP(WHERE);
-/*
-
Compressable File Types:

-
-This is a list of compression methods available for different file types.
-These will be used for items such as creating QWK packets, temporary
-files from the transfer section, and more.
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"Compressable File Types",opt);
-				if(i==-1)
-					break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-					FREE(fcomp[i]);
-					total_fcomps--;
-					while(i<total_fcomps) {
-						fcomp[i]=fcomp[i+1];
-						i++; }
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((fcomp=(fcomp_t **)REALLOC(fcomp
-						,sizeof(fcomp_t *)*(total_fcomps+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,total_fcomps+1);
-						total_fcomps=0;
-						bail(1);
-						continue; }
-					if(!total_fcomps) {
-						if((fcomp[0]=(fcomp_t *)MALLOC(
-							sizeof(fcomp_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fcomp_t));
-							continue; }
-						memset(fcomp[0],0,sizeof(fcomp_t));
-						strcpy(fcomp[0]->ext,"ZIP");
-						strcpy(fcomp[0]->cmd,"%!pkzip %f %s"); }
-					else {
-						for(j=total_fcomps;j>i;j--)
-							fcomp[j]=fcomp[j-1];
-						if((fcomp[i]=(fcomp_t *)MALLOC(
-							sizeof(fcomp_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fcomp_t));
-							continue; }
-						*fcomp[i]=*fcomp[i+1]; }
-					total_fcomps++;
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-					savfcomp=*fcomp[i];
-					continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-					*fcomp[i]=savfcomp;
-					changes=1;
-					continue; }
-				k=0;
-				done=0;
-				while(!done) {
-					j=0;
-					sprintf(opt[j++],"%-22.22s%s","File Extension"
-						,fcomp[i]->ext);
-					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
-						,fcomp[i]->cmd);
-					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
-						,fcomp[i]->ar);
-					opt[j][0]=0;
-					savnum=1;
-					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
-						,"Compressable File Type",opt)) {
-						case -1:
-							done=1;
-							break;
-						case 0:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Compressable File Type Extension"
-								,fcomp[i]->ext,3,K_UPPER|K_EDIT);
-							break;
-						case 1:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Command Line"
-								,fcomp[i]->cmd,50,K_EDIT);
-							break;
-						case 2:
-							savnum=2;
-							sprintf(str,"Compressable File Type %s"
-								,fcomp[i]->ext);
-							getar(str,fcomp[i]->ar);
-                            break; } } }
-            break;
-		case 12:	/* Transfer protocols */
-			dflt=bar=0;
-			while(1) {
-				for(i=0;i<total_prots && i<MAX_OPTS;i++)
-					sprintf(opt[i],"%c  %-40s"
-						,prot[i]->mnemonic,prot[i]->ulcmd);
-				opt[i][0]=0;
-				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
-				if(total_prots<MAX_OPTS)
-					i|=WIN_INS;
-				if(total_prots)
-					i|=WIN_DEL|WIN_GET;
-				if(savprot.mnemonic)
-					i|=WIN_PUT;
-				savnum=0;
-				SETHELP(WHERE);
-/*
-
File Transfer Protocols:

-
-This is a list of file transfer protocols that can be used to transfer
-files either to or from a remote user. For each protocol, you can
-specify the mnemonic (hot-key) to use to specify that protocol, the
-command line to use for uploads, downloads, batch uploads, batch
-downloads, bidirectional file transfers, and the support of DSZLOG. If
-the protocol doesn't support a certain method of transfer, or you don't
-wish it to be available for a certain method of transfer, leave the
-command line for that method blank. Be advised, that if you add or
-remove any transfer protocols, you will need to edit the protocol menus
-(ULPROT, DLPROT, BATUPROT, BATDPROT, and BIPROT) in the TEXT\MENU
-directory accordingly.
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"File Transfer Protocols",opt);
-				if(i==-1)
-					break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-					FREE(prot[i]);
-					total_prots--;
-					while(i<total_prots) {
-						prot[i]=prot[i+1];
-						i++; }
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((prot=(prot_t **)REALLOC(prot
-						,sizeof(prot_t *)*(total_prots+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,total_prots+1);
-						total_prots=0;
-						bail(1);
-						continue; }
-					if(!total_prots) {
-						if((prot[0]=(prot_t *)MALLOC(
-							sizeof(prot_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(prot_t));
-							continue; }
-						memset(prot[0],0,sizeof(prot_t));
-						prot[0]->mnemonic='Y';
-						prot[0]->misc=PROT_DSZLOG;
-						strcpy(prot[0]->ulcmd
-							,"%!dsz port %p estimate 0 %e rb %f");
-						strcpy(prot[0]->dlcmd
-							,"%!dsz port %p estimate 0 %e sb %f");
-						strcpy(prot[0]->batulcmd
-							,"%!dsz port %p estimate 0 %e rb %f");
-						strcpy(prot[0]->batdlcmd
-							,"%!dsz port %p estimate 0 %e sb @%f"); }
-					else {
-
-						for(j=total_prots;j>i;j--)
-							prot[j]=prot[j-1];
-						if((prot[i]=(prot_t *)MALLOC(
-							sizeof(prot_t)))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(prot_t));
-							continue; }
-						*prot[i]=*prot[i+1]; }
-					total_prots++;
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-					savprot=*prot[i];
-					continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-					*prot[i]=savprot;
-					changes=1;
-					continue; }
-				done=0;
-				k=0;
-				while(!done) {
-					j=0;
-					sprintf(opt[j++],"%-25.25s%c","Mnemonic (Command Key)"
-						,prot[i]->mnemonic);
-					sprintf(opt[j++],"%-25.25s%-40s","Protocol Name"
-						,prot[i]->name);
-					sprintf(opt[j++],"%-25.25s%-40s","Access Requirements"
-						,prot[i]->ar);
-					sprintf(opt[j++],"%-25.25s%-40s","Upload Command Line"
-						,prot[i]->ulcmd);
-					sprintf(opt[j++],"%-25.25s%-40s","Download Command Line"
-						,prot[i]->dlcmd);
-					sprintf(opt[j++],"%-25.25s%-40s","Batch UL Command Line"
-						,prot[i]->batulcmd);
-					sprintf(opt[j++],"%-25.25s%-40s","Batch DL Command Line"
-						,prot[i]->batdlcmd);
-					sprintf(opt[j++],"%-25.25s%-40s","Bidir Command Line"
-						,prot[i]->bicmd);
-					sprintf(opt[j++],"%-25.25s%s","Uses DSZLOG"
-						,prot[i]->misc&PROT_DSZLOG ? "Yes":"No");
-					opt[j][0]=0;
-					savnum=1;
-					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
-						,"File Transfer Protocol",opt)) {
-						case -1:
-							done=1;
-							break;
-						case 0:
-							str[0]=prot[i]->mnemonic;
-							str[1]=0;
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Mnemonic (Command Key)"
-								,str,1,K_UPPER|K_EDIT);
-							if(str[0])
-								prot[i]->mnemonic=str[0];
-							break;
-						case 1:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Protocol Name"
-								,prot[i]->name,25,K_EDIT);
-                            break;
-						case 2:
-							savnum=2;
-							sprintf(str,"Protocol %s",prot[i]->name);
-							getar(str,prot[i]->ar);
-							break;
-						case 3:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Upload Command"
-								,prot[i]->ulcmd,50,K_EDIT);
-							break;
-						case 4:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Download Command"
-								,prot[i]->dlcmd,50,K_EDIT);
-                            break;
-						case 5:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Batch UL Command"
-								,prot[i]->batulcmd,50,K_EDIT);
-                            break;
-						case 6:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Batch DL Command"
-								,prot[i]->batdlcmd,50,K_EDIT);
-                            break;
-						case 7:
-							uinput(WIN_MID|WIN_SAV,0,0
-								,"Bi-dir Command"
-								,prot[i]->bicmd,50,K_EDIT);
-                            break;
-						case 8:
-							strcpy(opt[0],"Yes");
-							strcpy(opt[1],"No");
-							opt[2][0]=0;
-							l=0;
-							savnum=2;
-							l=ulist(WIN_MID|WIN_SAV,0,0,0,&l,0
-								,"Uses DSZLOG",opt);
-							if(!l && !(prot[i]->misc&PROT_DSZLOG)) {
-								prot[i]->misc|=PROT_DSZLOG;
-								changes=1; }
-							else if(l==1 && prot[i]->misc&PROT_DSZLOG) {
-								prot[i]->misc&=~PROT_DSZLOG;
-								changes=1; }
-							break; } } }
-			break;
-		case 13:	/* Alternate file paths */
-			dflt=bar=0;
-			while(1) {
-				for(i=0;i<altpaths;i++)
-					sprintf(opt[i],"%3d: %-40s",i+1,altpath[i]);
-				opt[i][0]=0;
-				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
-				if((int)altpaths<MAX_OPTS)
-					i|=WIN_INS;
-				if(altpaths)
-					i|=WIN_DEL|WIN_GET;
-				if(savaltpath[0])
-					i|=WIN_PUT;
-				savnum=0;
-				SETHELP(WHERE);
-/*
-
Alternate File Paths:

-
-This option allows the sysop to add and configure alternate file paths
-for files stored on drives and directories other than the configured
-storage path for a file directory. This command is useful for those who
-have file directories where they wish to have files listed from
-multiple CD-ROMs or hard disks.
-*/
-				i=ulist(i,0,0,50,&dflt,&bar,"Alternate File Paths",opt);
-				if(i==-1)
-					break;
-				if((i&MSK_ON)==MSK_DEL) {
-					i&=MSK_OFF;
-					FREE(altpath[i]);
-					altpaths--;
-					while(i<altpaths) {
-						altpath[i]=altpath[i+1];
-						i++; }
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_INS) {
-					i&=MSK_OFF;
-					if((altpath=(char **)REALLOC(altpath
-						,sizeof(char *)*(altpaths+1)))==NULL) {
-						errormsg(WHERE,ERR_ALLOC,nulstr,altpaths+1);
-						altpaths=0;
-						bail(1);
-                        continue; }
-					if(!altpaths) {
-						if((altpath[0]=(char *)MALLOC(LEN_DIR+1))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,LEN_DIR+1);
-							continue; }
-						memset(altpath[0],0,LEN_DIR+1); }
-					else {
-						for(j=altpaths;j>i;j--)
-							altpath[j]=altpath[j-1];
-						if((altpath[i]=(char *)MALLOC(LEN_DIR+1))==NULL) {
-							errormsg(WHERE,ERR_ALLOC,nulstr,LEN_DIR+1);
-							continue; }
-						memcpy(altpath[i],altpath[i+1],LEN_DIR+1); }
-					altpaths++;
-					changes=1;
-					continue; }
-				if((i&MSK_ON)==MSK_GET) {
-					i&=MSK_OFF;
-					memcpy(savaltpath,altpath[i],LEN_DIR+1);
-					continue; }
-				if((i&MSK_ON)==MSK_PUT) {
-					i&=MSK_OFF;
-					memcpy(altpath[i],savaltpath,LEN_DIR+1);
-					changes=1;
-					continue; }
-				sprintf(str,"Path %d",i+1);
-				uinput(WIN_MID|WIN_SAV,0,0,str,altpath[i],50,K_UPPER|K_EDIT); }
-			break; } }
-}
-
+#line 2 "SCFGXFR1.C"
+
+/* Developed 1990-1997 by Rob Swindell; PO Box 501, Yorba Linda, CA 92885 */
+
+#include "scfg.h"
+
+void xfer_opts()
+{
+	static int xfr_dflt;
+	char str[81],done;
+	int i,j,k,l,dflt,bar;
+	static fextr_t savfextr;
+	static fview_t savfview;
+	static ftest_t savftest;
+	static fcomp_t savfcomp;
+	static prot_t savprot;
+	static dlevent_t savdlevent;
+	static char savaltpath[LEN_DIR+1];
+
+while(1) {
+	i=0;
+	sprintf(opt[i++],"%-33.33s%uk","Min Bytes Free Disk Space",min_dspace);
+	sprintf(opt[i++],"%-33.33s%u","Max Files in Batch UL Queue"
+		,max_batup);
+	sprintf(opt[i++],"%-33.33s%u","Max Files in Batch DL Queue"
+		,max_batdn);
+	sprintf(opt[i++],"%-33.33s%u","Max Users in User Transfers",max_userxfer);
+	sprintf(opt[i++],"%-33.33s%u%%","Default Credit on Upload"
+		,cdt_up_pct);
+	sprintf(opt[i++],"%-33.33s%u%%","Default Credit on Download"
+		,cdt_dn_pct);
+	if(leech_pct)
+		sprintf(str,"%u%% after %u seconds",leech_pct,leech_sec);
+	else
+		strcpy(str,"Disabled");
+	sprintf(opt[i++],"%-33.33s%s","Leech Protocol Detection",str);
+	strcpy(opt[i++],"Viewable Files...");
+	strcpy(opt[i++],"Testable Files...");
+	strcpy(opt[i++],"Download Events...");
+	strcpy(opt[i++],"Extractable Files...");
+	strcpy(opt[i++],"Compressable Files...");
+	strcpy(opt[i++],"Transfer Protocols...");
+	strcpy(opt[i++],"Alternate File Paths...");
+	opt[i][0]=0;
+	SETHELP(WHERE);
+/*
+
File Transfer Configuration:

+
+This menu has options and sub-menus that pertain specifically to the
+file transfer section of the BBS.
+*/
+	switch(ulist(WIN_ORG|WIN_ACT|WIN_CHE,0,0,72,&xfr_dflt,0
+		,"File Transfer Configuration",opt)) {
+		case -1:
+			i=save_changes(WIN_MID);
+			if(i==-1)
+				break;
+			if(!i)
+				write_file_cfg();
+            return;
+		case 0:
+			SETHELP(WHERE);
+/*
+
Minimum Kilobytes Free Disk Space to Allow Uploads:

+
+This is the minimum free space in a file directory to allow user
+uploads.
+*/
+			uinput(WIN_MID,0,0
+				,"Minimum Kilobytes Free Disk Space to Allow Uploads"
+				,itoa(min_dspace,tmp,10),5,K_EDIT|K_NUMBER);
+			min_dspace=atoi(tmp);
+			break;
+		case 1:
+			SETHELP(WHERE);
+/*
+
Maximum Files in Batch Upload Queue:

+
+This is the maximum number of files that can be placed in the batch
+upload queue.
+*/
+			uinput(WIN_MID,0,0,"Maximum Files in Batch Upload Queue"
+				,itoa(max_batup,tmp,10),5,K_EDIT|K_NUMBER);
+			max_batup=atoi(tmp);
+            break;
+		case 2:
+			SETHELP(WHERE);
+/*
+
Maximum Files in Batch Download Queue:

+
+This is the maximum number of files that can be placed in the batch
+download queue.
+*/
+			uinput(WIN_MID,0,0,"Maximum Files in Batch Download Queue"
+				,itoa(max_batdn,tmp,10),5,K_EDIT|K_NUMBER);
+			max_batdn=atoi(tmp);
+            break;
+		case 3:
+			SETHELP(WHERE);
+/*
+
Maximum Destination Users in User to User Transfer:

+
+This is the maximum number of users allowed in the destination user list
+of a user to user upload.
+*/
+			uinput(WIN_MID,0,0
+				,"Maximum Destination Users in User to User Transfers"
+				,itoa(max_userxfer,tmp,10),5,K_EDIT|K_NUMBER);
+			max_userxfer=atoi(tmp);
+			break;
+		case 4:
+SETHELP(WHERE);
+/*
+
Default Percentage of Credits to Credit Uploader on Upload:

+
+This is the default setting that will be used when new file
+directories are created.
+*/
+			uinput(WIN_MID,0,0
+				,"Default Percentage of Credits to Credit Uploader on Upload"
+				,itoa(cdt_up_pct,tmp,10),4,K_EDIT|K_NUMBER);
+			cdt_up_pct=atoi(tmp);
+			break;
+		case 5:
+SETHELP(WHERE);
+/*
+
Default Percentage of Credits to Credit Uploader on Download:

+
+This is the default setting that will be used when new file
+directories are created.
+*/
+			uinput(WIN_MID,0,0
+				,"Default Percentage of Credits to Credit Uploader on Download"
+				,itoa(cdt_dn_pct,tmp,10),4,K_EDIT|K_NUMBER);
+			cdt_dn_pct=atoi(tmp);
+			break;
+		case 6:
+			SETHELP(WHERE);
+/*
+
Leech Protocol Detection Percentage:

+
+This value is the sensitivity of the leech protocol detection feature of
+Synchronet. If the transfer is apparently unsuccessful, but the transfer
+time was at least this percentage of the estimated transfer time (based
+on the estimated CPS of the connection result code), then a leech
+protocol error is issued and the user's leech download counter is
+incremented. Setting this value to 
0
 disables leech protocol detection.
+*/
+			savnum=0;
+			uinput(WIN_MID|WIN_SAV,0,0
+				,"Leech Protocol Detection Percentage (0=Disabled)"
+				,itoa(leech_pct,tmp,10),3,K_EDIT|K_NUMBER);
+			leech_pct=atoi(tmp);
+			if(!leech_pct)
+				break;
+			SETHELP(WHERE);
+/*
+
Leech Protocol Minimum Time (in Seconds):

+
+This option allows you to adjust the sensitivity of the leech protocol
+detection feature. This value is the minimum length of transfer time
+(in seconds) that must elapse before an aborted tranfser will be
+considered a possible leech attempt.
+*/
+			uinput(WIN_MID,0,0
+				,"Leech Protocol Minimum Time (in Seconds)"
+				,itoa(leech_sec,tmp,10),3,K_EDIT|K_NUMBER);
+			leech_sec=atoi(tmp);
+			break;
+		case 7: 	/* Viewable file types */
+			dflt=bar=0;
+			while(1) {
+				for(i=0;i<total_fviews && i<MAX_OPTS;i++)
+					sprintf(opt[i],"%-3.3s  %-40s",fview[i]->ext,fview[i]->cmd);
+				opt[i][0]=0;
+				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
+				if(total_fviews<MAX_OPTS)
+					i|=WIN_INS;
+				if(total_fviews)
+					i|=WIN_DEL|WIN_GET;
+				if(savfview.cmd[0])
+					i|=WIN_PUT;
+				savnum=0;
+				SETHELP(WHERE);
+/*
+
Viewable File Types:

+
+This is a list of file types that have content information that can be
+viewed through the execution of an external program. Here are a couple of
+command line examples for a few file types.
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"Viewable File Types",opt);
+				if(i==-1)
+					break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+					FREE(fview[i]);
+					total_fviews--;
+					while(i<total_fviews) {
+						fview[i]=fview[i+1];
+						i++; }
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((fview=(fview_t **)REALLOC(fview
+						,sizeof(fview_t *)*(total_fviews+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,total_fviews+1);
+						total_fviews=0;
+						bail(1);
+						continue; }
+					if(!total_fviews) {
+						if((fview[0]=(fview_t *)MALLOC(
+							sizeof(fview_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fview_t));
+							continue; }
+						memset(fview[0],0,sizeof(fview_t));
+						strcpy(fview[0]->ext,"ZIP");
+						strcpy(fview[0]->cmd,"%!pkunzip -v %f"); }
+					else {
+						for(j=total_fviews;j>i;j--)
+							fview[j]=fview[j-1];
+						if((fview[i]=(fview_t *)MALLOC(
+							sizeof(fview_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fview_t));
+							continue; }
+						*fview[i]=*fview[i+1]; }
+					total_fviews++;
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+					savfview=*fview[i];
+					continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+					*fview[i]=savfview;
+					changes=1;
+					continue; }
+				k=0;
+				done=0;
+				while(!done) {
+					j=0;
+					sprintf(opt[j++],"%-22.22s%s","File Extension"
+						,fview[i]->ext);
+					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
+						,fview[i]->cmd);
+					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
+						,fview[i]->ar);
+					opt[j][0]=0;
+					savnum=1;
+					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
+						,"Viewable File Type",opt)) {
+						case -1:
+							done=1;
+							break;
+						case 0:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Viewable File Type Extension"
+								,fview[i]->ext,3,K_UPPER|K_EDIT);
+							break;
+						case 1:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Command Line"
+								,fview[i]->cmd,50,K_EDIT);
+							break;
+						case 2:
+							savnum=2;
+							sprintf(str,"Viewable File Type %s"
+								,fview[i]->ext);
+							getar(str,fview[i]->ar);
+                            break; } } }
+            break;
+		case 8:    /* Testable file types */
+			dflt=bar=0;
+			while(1) {
+				for(i=0;i<total_ftests && i<MAX_OPTS;i++)
+					sprintf(opt[i],"%-3.3s  %-40s",ftest[i]->ext,ftest[i]->cmd);
+				opt[i][0]=0;
+				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
+				if(total_ftests<MAX_OPTS)
+					i|=WIN_INS;
+				if(total_ftests)
+					i|=WIN_DEL|WIN_GET;
+				if(savftest.cmd[0])
+					i|=WIN_PUT;
+				savnum=0;
+				SETHELP(WHERE);
+/*
+
Testable File Types:

+
+This is a list of file types that will have a command line executed to
+test the file integrity upon their upload. The file types are specified
+by 
extension
 and if one file extension is listed more than once, each
+command line will be executed. The command lines must return a DOS error
+code of 0 (no error) in order for the file to pass the test. This method
+of file testing upon upload is also known as an upload event. This test
+or event, can do more than just test the file, it can perform any
+function that the sysop wishes. Such as adding comments to an archived
+file, or extracting an archive and performing a virus scan. While the
+external program is executing, a text string is displayed to the user.
+This 
working string
 can be set for each file type and command line
+listed.
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"Testable File Types",opt);
+				if(i==-1)
+					break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+					FREE(ftest[i]);
+					total_ftests--;
+					while(i<total_ftests) {
+						ftest[i]=ftest[i+1];
+						i++; }
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((ftest=(ftest_t **)REALLOC(ftest
+						,sizeof(ftest_t *)*(total_ftests+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,total_ftests+1);
+						total_ftests=0;
+						bail(1);
+						continue; }
+					if(!total_ftests) {
+						if((ftest[0]=(ftest_t *)MALLOC(
+							sizeof(ftest_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(ftest_t));
+							continue; }
+						memset(ftest[0],0,sizeof(ftest_t));
+						strcpy(ftest[0]->ext,"ZIP");
+						strcpy(ftest[0]->cmd,"%!pkunzip -t %f");
+						strcpy(ftest[0]->workstr,"Testing ZIP Integrity..."); }
+					else {
+
+						for(j=total_ftests;j>i;j--)
+							ftest[j]=ftest[j-1];
+						if((ftest[i]=(ftest_t *)MALLOC(
+							sizeof(ftest_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(ftest_t));
+							continue; }
+						*ftest[i]=*ftest[i+1]; }
+					total_ftests++;
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+					savftest=*ftest[i];
+					continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+					*ftest[i]=savftest;
+					changes=1;
+					continue; }
+				done=0;
+				k=0;
+				while(!done) {
+					j=0;
+					sprintf(opt[j++],"%-22.22s%s","File Extension"
+						,ftest[i]->ext);
+					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
+						,ftest[i]->cmd);
+					sprintf(opt[j++],"%-22.22s%s","Working String"
+						,ftest[i]->workstr);
+					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
+						,ftest[i]->ar);
+					opt[j][0]=0;
+					savnum=1;
+					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
+						,"Testable File Type",opt)) {
+						case -1:
+							done=1;
+							break;
+						case 0:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Testable File Type Extension"
+								,ftest[i]->ext,3,K_UPPER|K_EDIT);
+							break;
+						case 1:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Command Line"
+								,ftest[i]->cmd,50,K_EDIT);
+							break;
+						case 2:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Working String"
+								,ftest[i]->workstr,40,K_EDIT|K_MSG);
+							break;
+						case 3:
+							savnum=2;
+							sprintf(str,"Testable File Type %s",ftest[i]->ext);
+							getar(str,ftest[i]->ar);
+							break; } } }
+			break;
+		case 9:    /* Download Events */
+			dflt=bar=0;
+			while(1) {
+				for(i=0;i<total_dlevents && i<MAX_OPTS;i++)
+					sprintf(opt[i],"%-3.3s  %-40s",dlevent[i]->ext,dlevent[i]->cmd);
+				opt[i][0]=0;
+				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
+				if(total_dlevents<MAX_OPTS)
+					i|=WIN_INS;
+				if(total_dlevents)
+					i|=WIN_DEL|WIN_GET;
+				if(savdlevent.cmd[0])
+					i|=WIN_PUT;
+				savnum=0;
+				SETHELP(WHERE);
+/*
+
Download Events:

+
+This is a list of file types that will have a command line executed to
+perform an event upon their download (e.g. trigger a download event).
+The file types are specified by 
extension
 and if one file extension
+is listed more than once, each command line will be executed. The
+command lines must return a DOS error code of 0 (no error) in order
+for the file to pass the test. This test or event, can do more than
+just test the file, it can perform any function that the sysop wishes.
+Such as adding comments to an archived file, or extracting an archive
+and performing a virus scan. While the external program is executing,
+a text string is displayed to the user. This 
working string
 can be set
+for each file type and command line listed.
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"Download Events",opt);
+				if(i==-1)
+					break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+					FREE(dlevent[i]);
+					total_dlevents--;
+					while(i<total_dlevents) {
+						dlevent[i]=dlevent[i+1];
+						i++; }
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((dlevent=(dlevent_t **)REALLOC(dlevent
+						,sizeof(dlevent_t *)*(total_dlevents+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,total_dlevents+1);
+						total_dlevents=0;
+						bail(1);
+						continue; }
+					if(!total_dlevents) {
+						if((dlevent[0]=(dlevent_t *)MALLOC(
+							sizeof(dlevent_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(dlevent_t));
+							continue; }
+						memset(dlevent[0],0,sizeof(dlevent_t));
+						strcpy(dlevent[0]->ext,"ZIP");
+						strcpy(dlevent[0]->cmd,"%!pkzip -z %f "
+							"< ..\\text\\zipmsg.txt");
+						strcpy(dlevent[0]->workstr,"Adding ZIP Comment..."); }
+					else {
+
+						for(j=total_dlevents;j>i;j--)
+							dlevent[j]=dlevent[j-1];
+						if((dlevent[i]=(dlevent_t *)MALLOC(
+							sizeof(dlevent_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(dlevent_t));
+							continue; }
+						*dlevent[i]=*dlevent[i+1]; }
+					total_dlevents++;
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+					savdlevent=*dlevent[i];
+					continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+					*dlevent[i]=savdlevent;
+					changes=1;
+					continue; }
+				done=0;
+				k=0;
+				while(!done) {
+					j=0;
+					sprintf(opt[j++],"%-22.22s%s","File Extension"
+						,dlevent[i]->ext);
+					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
+						,dlevent[i]->cmd);
+					sprintf(opt[j++],"%-22.22s%s","Working String"
+						,dlevent[i]->workstr);
+					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
+						,dlevent[i]->ar);
+					opt[j][0]=0;
+					savnum=1;
+					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
+						,"Download Event",opt)) {
+						case -1:
+							done=1;
+							break;
+						case 0:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Download Event Extension"
+								,dlevent[i]->ext,3,K_UPPER|K_EDIT);
+							break;
+						case 1:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Command Line"
+								,dlevent[i]->cmd,50,K_EDIT);
+							break;
+						case 2:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Working String"
+								,dlevent[i]->workstr,40,K_EDIT|K_MSG);
+							break;
+						case 3:
+							savnum=2;
+							sprintf(str,"Download Event %s",dlevent[i]->ext);
+							getar(str,dlevent[i]->ar);
+							break; } } }
+            break;
+		case 10:	 /* Extractable file types */
+			dflt=bar=0;
+            while(1) {
+				for(i=0;i<total_fextrs && i<MAX_OPTS;i++)
+                    sprintf(opt[i],"%-3.3s  %-40s"
+                        ,fextr[i]->ext,fextr[i]->cmd);
+				opt[i][0]=0;
+                i=WIN_ACT|WIN_SAV;  /* save cause size can change */
+				if(total_fextrs<MAX_OPTS)
+                    i|=WIN_INS;
+                if(total_fextrs)
+                    i|=WIN_DEL|WIN_GET;
+				if(savfextr.cmd[0])
+                    i|=WIN_PUT;
+                savnum=0;
+                SETHELP(WHERE);
+/*
+
Extractable File Types:

+
+This is a list of archive file types that can be extracted to the temp
+directory by an external program. The file types are specified by their
+extension. For each file type you must specify the command line used to
+extract the file(s).
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"Extractable File Types",opt);
+                if(i==-1)
+                    break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+                    FREE(fextr[i]);
+                    total_fextrs--;
+                    while(i<total_fextrs) {
+                        fextr[i]=fextr[i+1];
+                        i++; }
+                    changes=1;
+                    continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((fextr=(fextr_t **)REALLOC(fextr
+						,sizeof(fextr_t *)*(total_fextrs+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,total_fextrs+1);
+						total_fextrs=0;
+						bail(1);
+						continue; }
+                    if(!total_fextrs) {
+                        if((fextr[0]=(fextr_t *)MALLOC(
+                            sizeof(fextr_t)))==NULL) {
+                            errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fextr_t));
+                            continue; }
+						memset(fextr[0],0,sizeof(fextr_t));
+                        strcpy(fextr[0]->ext,"ZIP");
+                        strcpy(fextr[0]->cmd,"%!pkunzip -o %f %g %s"); }
+                    else {
+
+                        for(j=total_fextrs;j>i;j--)
+                            fextr[j]=fextr[j-1];
+                        if((fextr[i]=(fextr_t *)MALLOC(
+                            sizeof(fextr_t)))==NULL) {
+                            errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fextr_t));
+                            continue; }
+                        *fextr[i]=*fextr[i+1]; }
+                    total_fextrs++;
+                    changes=1;
+                    continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+                    savfextr=*fextr[i];
+                    continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+                    *fextr[i]=savfextr;
+                    changes=1;
+                    continue; }
+				k=0;
+				done=0;
+				while(!done) {
+					j=0;
+					sprintf(opt[j++],"%-22.22s%s","File Extension"
+						,fextr[i]->ext);
+					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
+						,fextr[i]->cmd);
+					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
+						,fextr[i]->ar);
+					opt[j][0]=0;
+					savnum=1;
+					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
+						,"Extractable File Type",opt)) {
+						case -1:
+							done=1;
+							break;
+						case 0:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Extractable File Type Extension"
+								,fextr[i]->ext,3,K_UPPER|K_EDIT);
+							break;
+						case 1:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Command Line"
+								,fextr[i]->cmd,50,K_EDIT);
+							break;
+						case 2:
+							savnum=2;
+							sprintf(str,"Extractable File Type %s"
+								,fextr[i]->ext);
+							getar(str,fextr[i]->ar);
+                            break; } } }
+            break;
+		case 11:	 /* Compressable file types */
+			dflt=bar=0;
+			while(1) {
+				for(i=0;i<total_fcomps && i<MAX_OPTS;i++)
+					sprintf(opt[i],"%-3.3s  %-40s",fcomp[i]->ext,fcomp[i]->cmd);
+				opt[i][0]=0;
+				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
+				if(total_fcomps<MAX_OPTS)
+					i|=WIN_INS;
+				if(total_fcomps)
+					i|=WIN_DEL|WIN_GET;
+				if(savfcomp.cmd[0])
+					i|=WIN_PUT;
+				savnum=0;
+				SETHELP(WHERE);
+/*
+
Compressable File Types:

+
+This is a list of compression methods available for different file types.
+These will be used for items such as creating QWK packets, temporary
+files from the transfer section, and more.
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"Compressable File Types",opt);
+				if(i==-1)
+					break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+					FREE(fcomp[i]);
+					total_fcomps--;
+					while(i<total_fcomps) {
+						fcomp[i]=fcomp[i+1];
+						i++; }
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((fcomp=(fcomp_t **)REALLOC(fcomp
+						,sizeof(fcomp_t *)*(total_fcomps+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,total_fcomps+1);
+						total_fcomps=0;
+						bail(1);
+						continue; }
+					if(!total_fcomps) {
+						if((fcomp[0]=(fcomp_t *)MALLOC(
+							sizeof(fcomp_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fcomp_t));
+							continue; }
+						memset(fcomp[0],0,sizeof(fcomp_t));
+						strcpy(fcomp[0]->ext,"ZIP");
+						strcpy(fcomp[0]->cmd,"%!pkzip %f %s"); }
+					else {
+						for(j=total_fcomps;j>i;j--)
+							fcomp[j]=fcomp[j-1];
+						if((fcomp[i]=(fcomp_t *)MALLOC(
+							sizeof(fcomp_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(fcomp_t));
+							continue; }
+						*fcomp[i]=*fcomp[i+1]; }
+					total_fcomps++;
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+					savfcomp=*fcomp[i];
+					continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+					*fcomp[i]=savfcomp;
+					changes=1;
+					continue; }
+				k=0;
+				done=0;
+				while(!done) {
+					j=0;
+					sprintf(opt[j++],"%-22.22s%s","File Extension"
+						,fcomp[i]->ext);
+					sprintf(opt[j++],"%-22.22s%-40s","Command Line"
+						,fcomp[i]->cmd);
+					sprintf(opt[j++],"%-22.22s%s","Access Requirements"
+						,fcomp[i]->ar);
+					opt[j][0]=0;
+					savnum=1;
+					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
+						,"Compressable File Type",opt)) {
+						case -1:
+							done=1;
+							break;
+						case 0:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Compressable File Type Extension"
+								,fcomp[i]->ext,3,K_UPPER|K_EDIT);
+							break;
+						case 1:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Command Line"
+								,fcomp[i]->cmd,50,K_EDIT);
+							break;
+						case 2:
+							savnum=2;
+							sprintf(str,"Compressable File Type %s"
+								,fcomp[i]->ext);
+							getar(str,fcomp[i]->ar);
+                            break; } } }
+            break;
+		case 12:	/* Transfer protocols */
+			dflt=bar=0;
+			while(1) {
+				for(i=0;i<total_prots && i<MAX_OPTS;i++)
+					sprintf(opt[i],"%c  %-40s"
+						,prot[i]->mnemonic,prot[i]->ulcmd);
+				opt[i][0]=0;
+				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
+				if(total_prots<MAX_OPTS)
+					i|=WIN_INS;
+				if(total_prots)
+					i|=WIN_DEL|WIN_GET;
+				if(savprot.mnemonic)
+					i|=WIN_PUT;
+				savnum=0;
+				SETHELP(WHERE);
+/*
+
File Transfer Protocols:

+
+This is a list of file transfer protocols that can be used to transfer
+files either to or from a remote user. For each protocol, you can
+specify the mnemonic (hot-key) to use to specify that protocol, the
+command line to use for uploads, downloads, batch uploads, batch
+downloads, bidirectional file transfers, and the support of DSZLOG. If
+the protocol doesn't support a certain method of transfer, or you don't
+wish it to be available for a certain method of transfer, leave the
+command line for that method blank. Be advised, that if you add or
+remove any transfer protocols, you will need to edit the protocol menus
+(ULPROT, DLPROT, BATUPROT, BATDPROT, and BIPROT) in the TEXT\MENU
+directory accordingly.
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"File Transfer Protocols",opt);
+				if(i==-1)
+					break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+					FREE(prot[i]);
+					total_prots--;
+					while(i<total_prots) {
+						prot[i]=prot[i+1];
+						i++; }
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((prot=(prot_t **)REALLOC(prot
+						,sizeof(prot_t *)*(total_prots+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,total_prots+1);
+						total_prots=0;
+						bail(1);
+						continue; }
+					if(!total_prots) {
+						if((prot[0]=(prot_t *)MALLOC(
+							sizeof(prot_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(prot_t));
+							continue; }
+						memset(prot[0],0,sizeof(prot_t));
+						prot[0]->mnemonic='Y';
+						prot[0]->misc=PROT_DSZLOG;
+						strcpy(prot[0]->ulcmd
+							,"%!dsz port %p estimate 0 %e rb %f");
+						strcpy(prot[0]->dlcmd
+							,"%!dsz port %p estimate 0 %e sb %f");
+						strcpy(prot[0]->batulcmd
+							,"%!dsz port %p estimate 0 %e rb %f");
+						strcpy(prot[0]->batdlcmd
+							,"%!dsz port %p estimate 0 %e sb @%f"); }
+					else {
+
+						for(j=total_prots;j>i;j--)
+							prot[j]=prot[j-1];
+						if((prot[i]=(prot_t *)MALLOC(
+							sizeof(prot_t)))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,sizeof(prot_t));
+							continue; }
+						*prot[i]=*prot[i+1]; }
+					total_prots++;
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+					savprot=*prot[i];
+					continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+					*prot[i]=savprot;
+					changes=1;
+					continue; }
+				done=0;
+				k=0;
+				while(!done) {
+					j=0;
+					sprintf(opt[j++],"%-25.25s%c","Mnemonic (Command Key)"
+						,prot[i]->mnemonic);
+					sprintf(opt[j++],"%-25.25s%-40s","Protocol Name"
+						,prot[i]->name);
+					sprintf(opt[j++],"%-25.25s%-40s","Access Requirements"
+						,prot[i]->ar);
+					sprintf(opt[j++],"%-25.25s%-40s","Upload Command Line"
+						,prot[i]->ulcmd);
+					sprintf(opt[j++],"%-25.25s%-40s","Download Command Line"
+						,prot[i]->dlcmd);
+					sprintf(opt[j++],"%-25.25s%-40s","Batch UL Command Line"
+						,prot[i]->batulcmd);
+					sprintf(opt[j++],"%-25.25s%-40s","Batch DL Command Line"
+						,prot[i]->batdlcmd);
+					sprintf(opt[j++],"%-25.25s%-40s","Bidir Command Line"
+						,prot[i]->bicmd);
+					sprintf(opt[j++],"%-25.25s%s","Uses DSZLOG"
+						,prot[i]->misc&PROT_DSZLOG ? "Yes":"No");
+					opt[j][0]=0;
+					savnum=1;
+					switch(ulist(WIN_RHT|WIN_BOT|WIN_SAV|WIN_ACT,0,0,0,&k,0
+						,"File Transfer Protocol",opt)) {
+						case -1:
+							done=1;
+							break;
+						case 0:
+							str[0]=prot[i]->mnemonic;
+							str[1]=0;
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Mnemonic (Command Key)"
+								,str,1,K_UPPER|K_EDIT);
+							if(str[0])
+								prot[i]->mnemonic=str[0];
+							break;
+						case 1:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Protocol Name"
+								,prot[i]->name,25,K_EDIT);
+                            break;
+						case 2:
+							savnum=2;
+							sprintf(str,"Protocol %s",prot[i]->name);
+							getar(str,prot[i]->ar);
+							break;
+						case 3:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Upload Command"
+								,prot[i]->ulcmd,50,K_EDIT);
+							break;
+						case 4:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Download Command"
+								,prot[i]->dlcmd,50,K_EDIT);
+                            break;
+						case 5:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Batch UL Command"
+								,prot[i]->batulcmd,50,K_EDIT);
+                            break;
+						case 6:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Batch DL Command"
+								,prot[i]->batdlcmd,50,K_EDIT);
+                            break;
+						case 7:
+							uinput(WIN_MID|WIN_SAV,0,0
+								,"Bi-dir Command"
+								,prot[i]->bicmd,50,K_EDIT);
+                            break;
+						case 8:
+							strcpy(opt[0],"Yes");
+							strcpy(opt[1],"No");
+							opt[2][0]=0;
+							l=0;
+							savnum=2;
+							l=ulist(WIN_MID|WIN_SAV,0,0,0,&l,0
+								,"Uses DSZLOG",opt);
+							if(!l && !(prot[i]->misc&PROT_DSZLOG)) {
+								prot[i]->misc|=PROT_DSZLOG;
+								changes=1; }
+							else if(l==1 && prot[i]->misc&PROT_DSZLOG) {
+								prot[i]->misc&=~PROT_DSZLOG;
+								changes=1; }
+							break; } } }
+			break;
+		case 13:	/* Alternate file paths */
+			dflt=bar=0;
+			while(1) {
+				for(i=0;i<altpaths;i++)
+					sprintf(opt[i],"%3d: %-40s",i+1,altpath[i]);
+				opt[i][0]=0;
+				i=WIN_ACT|WIN_SAV;	/* save cause size can change */
+				if((int)altpaths<MAX_OPTS)
+					i|=WIN_INS;
+				if(altpaths)
+					i|=WIN_DEL|WIN_GET;
+				if(savaltpath[0])
+					i|=WIN_PUT;
+				savnum=0;
+				SETHELP(WHERE);
+/*
+
Alternate File Paths:

+
+This option allows the sysop to add and configure alternate file paths
+for files stored on drives and directories other than the configured
+storage path for a file directory. This command is useful for those who
+have file directories where they wish to have files listed from
+multiple CD-ROMs or hard disks.
+*/
+				i=ulist(i,0,0,50,&dflt,&bar,"Alternate File Paths",opt);
+				if(i==-1)
+					break;
+				if((i&MSK_ON)==MSK_DEL) {
+					i&=MSK_OFF;
+					FREE(altpath[i]);
+					altpaths--;
+					while(i<altpaths) {
+						altpath[i]=altpath[i+1];
+						i++; }
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_INS) {
+					i&=MSK_OFF;
+					if((altpath=(char **)REALLOC(altpath
+						,sizeof(char *)*(altpaths+1)))==NULL) {
+						errormsg(WHERE,ERR_ALLOC,nulstr,altpaths+1);
+						altpaths=0;
+						bail(1);
+                        continue; }
+					if(!altpaths) {
+						if((altpath[0]=(char *)MALLOC(LEN_DIR+1))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,LEN_DIR+1);
+							continue; }
+						memset(altpath[0],0,LEN_DIR+1); }
+					else {
+						for(j=altpaths;j>i;j--)
+							altpath[j]=altpath[j-1];
+						if((altpath[i]=(char *)MALLOC(LEN_DIR+1))==NULL) {
+							errormsg(WHERE,ERR_ALLOC,nulstr,LEN_DIR+1);
+							continue; }
+						memcpy(altpath[i],altpath[i+1],LEN_DIR+1); }
+					altpaths++;
+					changes=1;
+					continue; }
+				if((i&MSK_ON)==MSK_GET) {
+					i&=MSK_OFF;
+					memcpy(savaltpath,altpath[i],LEN_DIR+1);
+					continue; }
+				if((i&MSK_ON)==MSK_PUT) {
+					i&=MSK_OFF;
+					memcpy(altpath[i],savaltpath,LEN_DIR+1);
+					changes=1;
+					continue; }
+				sprintf(str,"Path %d",i+1);
+				uinput(WIN_MID|WIN_SAV,0,0,str,altpath[i],50,K_UPPER|K_EDIT); }
+			break; } }
+}
+