Return to SUN3-CARRERA CVS log

Up to [The Machine Emulator] / tme / machine / sun3

tme-0.6

# $Id: SUN3-CARRERA,v 1.1.1.2 2018/04/24 16:41:38 root Exp $

## SUN3-CARRERA - example tmesh commands to create a Sun3 "Carrera" VME
## machine:

## the sun3 common buses and devices:
##
mainbus0: tme/machine/sun3 my-sun3-idprom.bin
cpu0 at mainbus0: tme/ic/m68020 fpu-type m68881 fpu-compliance unknown fpu-incomplete line-f
obio0 at mainbus0 obio: tme/generic/bus size 16MB
obmem0 at mainbus0 obmem: tme/generic/bus size 4GB
ram0 at obmem0 addr 0x0: tme/host/posix/memory ram 8MB
rom0 at obmem0 addr 0x0fef0000: tme/host/posix/memory rom sun3-carrera-rev-3.0.bin

## the sun3 common obio devices:
##
zs0 at obio0 addr 0x020000 ipl 6: tme/machine/sun3/zs
zs1 at obio0 addr 0x000000 ipl 6: tme/machine/sun3/zs
eeprom0	at obio0 addr 0x040000: tme/host/posix/memory persistent my-sun3-eeprom.bin
clock0 at obio0 addr 0x060000: tme/machine/sun3/clock
mainbus0 memerr	at obio0 addr 0x080000 ipl 7
mainbus0 intreg	at obio0 addr 0x0A0000

## the Sun Intel Ethernet on-board:
##
# uncomment these lines if you have read/write permission on one
# of your /dev/bpfN devices and you want an Ethernet device:
#
#obie0: tme/machine/sun3/obie
#obie0 csr at obio0 addr 0x0c0000 ipl 3
#obie0 memory at mainbus0
#ie0 at obie0: tme/ic/i82586
#bpf1 at ie0: tme/host/bsd/bpf

## the Sun type-3 keyboard and mouse:
##
kbd0 at zs1 channel A: tme/serial/keyboard type sun-type-3 macros my-sun-macros.txt map sun-keyboards.txt rate 20
ms0 at zs1 channel B: tme/serial/mouse type mousesystems-5

## the Sun bwtwo on-board:
##
bwtwo0 at obmem0 addr 0xff000000: tme/machine/sun3/bwtwo type old-onboard

## ttya:
##
# uncomment the following line if you aren't using the GTK-based
# display console.  this will connect ttya to the master side of
# a pseudo-tty (in this case, /dev/ttyr0), which you can connect to
# using tip or some other serial communications program on the slave
# side (in this case, /dev/ptyr0):
#
#console0 at zs0 channel A: tme/host/posix/serial device /dev/ttyr0 break-carats

## the sun3 VME buses:
##
vme0: tme/generic/bus size 4GB
mainbus0 vme at vme0 addr 0x00000

## the Sun "SCSI-2" VME board (shares the Multibus implementation):
##
#sc0 at vme0 addr 0xff200000 ipl 2: tme/bus/multibus/sun-sc vme
#scsibus0 at sc0: tme/scsi/bus
#zs2 at vme0 addr 0xff200800 ipl 6: tme/machine/sun3/zs
#zs3 at vme0 addr 0xff201000 ipl 6: tme/machine/sun3/zs

## the Sun "SCSI-3" VME board
##
si0: tme/machine/sun3/si type vme
si0 csr at vme0 addr 0xff200000 ipl 2
ncr0 at si0: tme/ic/ncr5380
scsibus0 at ncr0: tme/scsi/bus

## the Sun cgthree VME board (handled by the cgtwo emulation):
##
cgthree0 at vme0 addr 0xff400000 ipl 4: tme/machine/sun3/cgtwo type sun3

## the GTK-based display console:
##
# comment out these lines, and the bwtwo0 and cgthree0 declarations
# above, if you don't have GTK or you don't want a display console:
#
display0: tme/host/gtk/display
display0 at bwtwo0
display0 at cgthree0
display0 at kbd0
display0 at ms0

## a SCSI disk:
##
# if you're using SunOS, change the disk type from tme-scsi-1 to
# acb4000, to get an Adaptec ACB-4000 compatible disk:
#
sd0 at scsibus0: tme/scsi/disk id 0 type tme-scsi-1
disk0 at sd0: tme/host/posix/disk file my-sun3-disk.img

## a SCSI tape:
##
# if you're using SunOS, remove the vendor EMULEX and product "MT-02 QIC" 
# to get a 100% Emulex MT-02 compatible tape:
#
st0 at scsibus0: tme/scsi/tape id 4 type emulex-mt02 vendor EMULEX product "MT-02 QIC"
tape0 at st0: tme/host/posix/tape

## power up the machine:
##
# uncomment this line to automatically power up the machine when
# tmesh starts:
#
# command mainbus0 power up

This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.