![[BACK]](/cvsweb/icons/back.gif){kind=icon}
Return to SUN-ULTRA-1 CVS log ![[TXT]](/cvsweb/icons/text.gif){kind=icon}
![[DIR]](/cvsweb/icons/dir.gif){kind=icon}
Up to [The Machine Emulator] / tme / machine / sun4u|
Return to SUN-ULTRA-1 CVS log | Up to [The Machine Emulator] / tme / machine / sun4u |
1.1 root 1: # $Id: SUN-ULTRA-1,v 1.2 2010/06/05 19:30:55 fredette Exp $
2:
3: ## SUN-ULTRA-1 - example tmesh commands to create a Sun Ultra-1
4: ## machine:
5:
6: ## the Ultra-1 system controller, CPU, I/O bridge, and RAM:
7: ##
8: sc0: tme/ic/stp2200
9: cpu0 at sc0 addr 0x1c000000000: tme/ic/stp1030 tick-frequency 167M fpu-type builtin fpu-compliance partial fpu-incomplete trap
10: sbus0 at sc0 addr 0x1fe00000000: tme/ic/stp2220
11: ##
12: ## NOTE THAT THE SIZE OF EACH ramN BANK CAN ONLY BE 32MB,
13: ## OR 64MB, OR 128MB, OR 256MB. DO NOT USE ANY OTHER
14: ## SIZES OR ADD MORE BANKS. ram0 MUST EXIST.
15: ##
16: ram0 at sc0 addr 0x00000000: tme/host/posix/memory ram 32MB
17: #ram1 at sc0 addr 0x10000000: tme/host/posix/memory ram 32MB
18: #ram2 at sc0 addr 0x20000000: tme/host/posix/memory ram 32MB
19: #ram3 at sc0 addr 0x30000000: tme/host/posix/memory ram 32MB
20:
21: ## the SLAVIO devices:
22: ##
23: flash0 at sbus0 slot 15 offset 0x0000000: tme/host/posix/memory rom "SUNW,501-3082-update7.bin"
24: zs0 at sbus0 slot 15 offset 0x1100000: tme/ic/ncr89c105/z85c30
25: zs1 at sbus0 slot 15 offset 0x1000000: tme/ic/ncr89c105/z85c30
26: nvram0 at sbus0 slot 15 offset 0x1200000: tme/host/posix/memory persistent my-sun4u-nvram.bin
27: clock0 at sbus0 slot 15 offset 0x1201ff0: tme/machine/sun4/clock type tme/ic/mk48t59
28: sc0 at sbus0 slot 15 offset 0x1300000
29: fdtwo0 at sbus0 slot 15 offset 0x1400000: tme/ic/ncr89c105/i82077
30: auxio0 at sbus0 slot 15 offset 0x1900000: tme/ic/ncr89c105/auxio
31:
32: ## the Aurora Personality Chip and CS4231:
33: ##
34: apcdma0 at sbus0 slot 13 offset 0x0: tme/ic/stp2024 id 0x3
35: audiocs0 at apcdma0 codec: tme/ic/cs4231A
36:
37: ## the Sun type-4 keyboard and mouse:
38: ##
39: kbd0 at zs1 channel A: tme/serial/keyboard type sun-type-4-us macros my-sun-macros.txt map sun-keyboards.txt rate 20
40: ms0 at zs1 channel B: tme/serial/mouse type mousesystems-5
41:
42: ## IF YOU DO NOT ATTACH kbd0 at zs1 channel A, THEN YOU MUST ATTACH
43: ## sink0 at zs1 channel A, otherwise the PROM's keyboard poll never
44: ## finishes:
45: ##
46: #sink0 at zs1 channel A: tme/serial/sink
47:
48: ## ttya:
49: ##
50: # comment the first line, and uncomment the following line if you
51: # aren't using the GTK-based display console. this will connect ttya
52: # to the master side of a pseudo-tty (in this case, /dev/ttyr0), which
53: # you can connect to using tip or some other serial communications
54: # program on the slave side (in this case, /dev/ptyr0):
55: #
56: sink1 at zs0 channel A: tme/serial/sink
57: #console0 at zs0 channel A: tme/host/posix/serial device /dev/ttyr0 break-carats
58:
59: ## the SBus esp SCSI:
60: ##
61: esp0 at sbus0 slot 14 offset 0x8800000: tme/ic/lsi64854 revision "1+" channel scsi
62: esp0 dma at sbus0 slot 14 offset 0x8400000
63: ncr0 at esp0 master: tme/ic/ncr53c9x variant esp100
64: scsibus0 at ncr0: tme/scsi/bus
65:
66: ## the SBus LANCE Ethernet:
67: ##
68: # uncomment the bpf0 line if you have read/write permission on one
69: # of your /dev/bpfN devices and you want actual network access:
70: #
71: ledma0 dma at sbus0 slot 14 offset 0x8400010: tme/ic/lsi64854 revision 2 channel ethernet
72: ledma0 at sbus0 slot 14 offset 0x8c00000
73: le0 at ledma0 master: tme/ic/am7990
74: #bpf0 at le0: tme/host/bsd/bpf
75:
76: ## the SBus parallel port:
77: ##
78: bpp0 at sbus0 slot 14 offset 0xc800000: tme/ic/lsi64854 revision "1+" channel parallel
79:
80: ## an SBus cgsix:
81: ##
82: ## NOTE: the cgsix emulation is extremely poor; it's enabled
83: ## by default only because NetBSD/sparc64 currently does not
84: ## support a cgthree console. THIS WILL NOT RUN X:
85: ##
86: cgsix0 at sbus0 slot 0 offset 0x0: tme/bus/sbus/cgsix type 501-2325
87: cgsixrom0 at sbus0 slot 0 offset 0x0: tme/host/posix/memory rom "SUNW,501-2325.bin"
88:
89: ## an SBus cgthree:
90: ##
91: #cgthree0 at sbus0 slot 0 offset 0x0: tme/bus/sbus/cgthree
92: #cgthreerom0 at sbus0 slot 0 offset 0x0: tme/host/posix/memory rom "SUNW,501-1415.bin"
93:
94: ## an SBus bwtwo:
95: ##
96: #bwtwo0 at sbus0 slot 1 offset 0x0: tme/bus/sbus/bwtwo
97: #bwtworom0 at sbus0 slot 1 offset 0x0: tme/host/posix/memory rom "SUNW,501-1561.bin"
98:
99: ## the GTK-based display console:
100: ##
101: # comment out these lines, and the SBus framebuffer declarations
102: # above, if you don't have GTK or you don't want a display console:
103: #
104: display0: tme/host/gtk/display
105: display0 at cgsix0
106: #display0 at cgthree0
107: #display0 at bwtwo0
108: display0 at kbd0
109: display0 at ms0
110:
111: ## a SCSI disk:
112: ##
113: #
114: sd0 at scsibus0: tme/scsi/disk id 0 type tme-scsi-1
115: disk0 at sd0: tme/host/posix/disk file my-sun4u-disk.img
116:
117: ## a SCSI tape:
118: ##
119: st0 at scsibus0: tme/scsi/tape id 4 type tme-scsi-1
120: tape0 at st0: tme/host/posix/tape
121:
122: ## set the idle type, so tmesh doesn't consume all of the host CPU:
123: ##
124: # use the appropriate type for the guest operating system:
125: #
126: # NetBSD/sparc64 1.6 through 4.99.19: netbsd64-type-0
127: # NetBSD/sparc64 4.99.21 through this writing: netbsd64-type-1
128: #
129: command cpu0 idle-type netbsd64-type-1
130:
131: ## power up the machine:
132: ##
133: # uncomment this line to automatically power up the machine when
134: # tmesh starts:
135: #
136: #command sc0 power
This archive runs on limited infrastructure. Preserving old code on modern bandwidth. Automated agents are requested to crawl responsibly.