--- uae/src/main.c 2018/04/24 16:46:10 1.1.1.7 +++ uae/src/main.c 2018/04/24 17:16:30 1.1.1.21 @@ -6,47 +6,50 @@ * Copyright 1995 Ed Hanway * Copyright 1995, 1996, 1997 Bernd Schmidt */ - #include "sysconfig.h" #include "sysdeps.h" #include -#include "config.h" #include "options.h" -#include "threaddep/penguin.h" +#include "threaddep/thread.h" #include "uae.h" #include "gensound.h" +#include "audio.h" #include "sounddep/sound.h" #include "events.h" #include "memory.h" #include "custom.h" #include "serial.h" -#include "readcpu.h" #include "newcpu.h" #include "disk.h" #include "debug.h" #include "xwin.h" -#include "joystick.h" +#include "inputdevice.h" #include "keybuf.h" #include "gui.h" #include "zfile.h" #include "autoconf.h" #include "osemu.h" #include "osdep/exectasks.h" -#include "compiler.h" #include "picasso96.h" #include "bsdsocket.h" #include "uaeexe.h" -#include "getopt.h" +#include "native2amiga.h" +#include "scsidev.h" -long int version = 256*65536L*UAEMAJOR + 65536L*UAEMINOR + UAESUBREV; +#ifdef USE_SDL +#include "SDL.h" +#endif struct uae_prefs currprefs, changed_prefs; +struct gfx_params *curr_gfx; int no_gui = 0; int joystickpresent = 0; int cloanto_rom = 0; +struct gui_info gui_data; + char warning_buffer[256]; char optionsfile[256]; @@ -60,9 +63,6 @@ char optionsfile[256]; * PostScript printer or ghostscript -=SR=- */ -/* People must provide their own name for this */ -char sername[256] = ""; - /* Slightly stupid place for this... */ /* ncurses.c might use quite a few of those. */ char *colormodes[] = { "256 colors", "32768 colors", "65536 colors", @@ -74,6 +74,20 @@ char *colormodes[] = { "256 colors", "32 "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "", "" }; +unsigned long gtod_resolution, gtod_secs; + +static void init_gtod (void) +{ + struct timeval tv1, tv2; + gettimeofday (&tv1, NULL); + do { + gettimeofday (&tv2, NULL); + } while (tv1.tv_sec == tv2.tv_sec + && tv1.tv_usec == tv2.tv_usec); + + gtod_resolution = (tv2.tv_usec - tv1.tv_usec + 1000000 * (tv2.tv_sec - tv1.tv_sec)); +} + void discard_prefs (struct uae_prefs *p) { struct strlist **ps = &p->unknown_lines; @@ -92,48 +106,61 @@ void default_prefs (struct uae_prefs *p) p->start_gui = 1; p->start_debugger = 0; + p->leds_on_screen = 1; p->unknown_lines = 0; /* Note to porters: please don't change any of these options! UAE is supposed * to behave identically on all platforms if possible. */ - p->framerate = 1; p->illegal_mem = 0; p->no_xhair = 0; p->use_serial = 0; p->serial_demand = 0; p->parallel_demand = 0; - p->automount_uaedev = 1; - p->jport0 = 2; - p->jport1 = 0; + p->jport0 = JSEM_MICE; + p->jport1 = JSEM_JOYS; + p->keyboard_lang = KBD_LANG_US; p->emul_accuracy = 2; p->test_drawing_speed = 0; p->produce_sound = 0; - p->stereo = 0; + p->sound_stereo = 0; p->sound_bits = DEFAULT_SOUND_BITS; p->sound_freq = DEFAULT_SOUND_FREQ; p->sound_minbsiz = DEFAULT_SOUND_MINB; p->sound_maxbsiz = DEFAULT_SOUND_MAXB; + p->sound_interpol = 0; - p->gfx_width = 800; - p->gfx_height = 600; - p->gfx_lores = 0; - p->gfx_linedbl = 0; + p->gfx_framerate = 1; + p->gfx_w.width = 800; + p->gfx_w.height = 600; + p->gfx_w.lores = 0; + p->gfx_w.linedbl = 2; + p->gfx_w.correct_aspect = 0; + p->gfx_w.xcenter = 0; + p->gfx_w.ycenter = 0; + p->gfx_f = p->gfx_w; p->gfx_afullscreen = 0; p->gfx_pfullscreen = 0; - p->gfx_correct_aspect = 0; - p->gfx_xcenter = 0; - p->gfx_ycenter = 0; p->color_mode = 0; p->x11_use_low_bandwidth = 0; p->x11_use_mitshm = 0; p->x11_hide_cursor = 1; + p->svga_no_linear = 0; + + p->curses_reverse_video = 0; + + p->win32_middle_mouse = 0; + p->win32_logfile = 0; + p->win32_iconified_nospeed = 0; + p->win32_iconified_nosound = 0; + p->win32_no_overlay = 0; + p->immediate_blits = 0; - p->blits_32bit_enabled = 0; + p->collision_level = 1; strcpy (p->df[0], "df0.adf"); strcpy (p->df[1], "df1.adf"); @@ -148,7 +175,10 @@ void default_prefs (struct uae_prefs *p) strcpy (p->path_floppy, "./"); strcpy (p->path_hardfile, "./"); - p->m68k_speed = 4; + strcpy (p->prtname, ""); + strcpy (p->sername, ""); + + p->m68k_speed = 0; p->cpu_level = 2; p->cpu_compatible = 0; p->address_space_24 = 0; @@ -160,22 +190,25 @@ void default_prefs (struct uae_prefs *p) p->bogomem_size = 0x00000000; p->gfxmem_size = 0x00000000; + p->nr_floppies = 4; + p->mountinfo = alloc_mountinfo (); + inputdevice_default_prefs (p); } -void fixup_prefs_dimensions (struct uae_prefs *prefs) +void fixup_prefs_dimensions (struct gfx_params *p) { - if (prefs->gfx_width < 320) - prefs->gfx_width = 320; - if (prefs->gfx_height < 200) - prefs->gfx_height = 200; - if (prefs->gfx_height > 300 && ! prefs->gfx_linedbl) - prefs->gfx_height = 300; - if (prefs->gfx_height > 600) - prefs->gfx_height = 600; + if (p->width < 320) + p->width = 320; + if (p->height < 200) + p->height = 200; + if (p->height > 300 && ! p->linedbl) + p->height = 300; + if (p->height > 600) + p->height = 600; - prefs->gfx_width += 7; /* X86.S wants multiples of 4 bytes, might be 8 in the future. */ - prefs->gfx_width &= ~7; + p->width += 7; /* X86.S wants multiples of 4 bytes, might be 8 in the future. */ + p->width &= ~7; } static void fix_options (void) @@ -187,81 +220,105 @@ static void fix_options (void) || currprefs.chipmem_size > 0x800000) { currprefs.chipmem_size = 0x200000; - fprintf (stderr, "Unsupported chipmem size!\n"); + write_log ("Unsupported chipmem size!\n"); err = 1; } if ((currprefs.fastmem_size & (currprefs.fastmem_size - 1)) != 0 || (currprefs.fastmem_size != 0 && (currprefs.fastmem_size < 0x100000 || currprefs.fastmem_size > 0x800000))) { currprefs.fastmem_size = 0; - fprintf (stderr, "Unsupported fastmem size!\n"); + write_log ("Unsupported fastmem size!\n"); err = 1; } if ((currprefs.gfxmem_size & (currprefs.gfxmem_size - 1)) != 0 - || (currprefs.gfxmem_size != 0 && (currprefs.gfxmem_size < 0x100000 || currprefs.gfxmem_size > 0x800000))) + || (currprefs.gfxmem_size != 0 && (currprefs.gfxmem_size < 0x100000 || currprefs.gfxmem_size > 0x2000000))) { + write_log ("Unsupported graphics card memory size %lx!\n", currprefs.gfxmem_size); currprefs.gfxmem_size = 0; - fprintf (stderr, "Unsupported graphics card memory size!\n"); err = 1; } if ((currprefs.z3fastmem_size & (currprefs.z3fastmem_size - 1)) != 0 || (currprefs.z3fastmem_size != 0 && (currprefs.z3fastmem_size < 0x100000 || currprefs.z3fastmem_size > 0x4000000))) { currprefs.z3fastmem_size = 0; - fprintf (stderr, "Unsupported Zorro III fastmem size!\n"); + write_log ("Unsupported Zorro III fastmem size!\n"); err = 1; } if (currprefs.address_space_24 && (currprefs.gfxmem_size != 0 || currprefs.z3fastmem_size != 0)) { currprefs.z3fastmem_size = currprefs.gfxmem_size = 0; - fprintf (stderr, "Can't use a graphics card or Zorro III fastmem when using a 24 bit\n" + write_log ("Can't use a graphics card or Zorro III fastmem when using a 24 bit\n" "address space - sorry.\n"); } if ((currprefs.bogomem_size & (currprefs.bogomem_size - 1)) != 0 || (currprefs.bogomem_size != 0 && (currprefs.bogomem_size < 0x80000 || currprefs.bogomem_size > 0x100000))) { currprefs.bogomem_size = 0; - fprintf (stderr, "Unsupported bogomem size!\n"); + write_log ("Unsupported bogomem size!\n"); err = 1; } if (currprefs.chipmem_size > 0x200000 && currprefs.fastmem_size != 0) { - fprintf (stderr, "You can't use fastmem and more than 2MB chip at the same time!\n"); + write_log ("You can't use fastmem and more than 2MB chip at the same time!\n"); currprefs.fastmem_size = 0; err = 1; } +#if 0 if (currprefs.m68k_speed < -1 || currprefs.m68k_speed > 20) { - fprintf (stderr, "Bad value for -w parameter: must be -1, 0, or within 1..20.\n"); + write_log ("Bad value for -w parameter: must be -1, 0, or within 1..20.\n"); currprefs.m68k_speed = 4; err = 1; } +#endif + if (currprefs.produce_sound < 0 || currprefs.produce_sound > 3) { - fprintf (stderr, "Bad value for -S parameter: enable value must be within 0..3\n"); + write_log ("Bad value for -S parameter: enable value must be within 0..3\n"); currprefs.produce_sound = 0; err = 1; } if (currprefs.cpu_level < 2 && currprefs.z3fastmem_size > 0) { - fprintf (stderr, "Z3 fast memory can't be used with a 68000/68010 emulation. It\n" + write_log ("Z3 fast memory can't be used with a 68000/68010 emulation. It\n" "requires a 68020 emulation. Turning off Z3 fast memory.\n"); currprefs.z3fastmem_size = 0; err = 1; } - if (currprefs.cpu_level < 2 && currprefs.gfxmem_size > 0) { - fprintf (stderr, "Picasso96 can't be used with a 68000/68010 emulation. It\n" + if (currprefs.gfxmem_size > 0 && (currprefs.cpu_level < 2 || currprefs.address_space_24)) { + write_log ("Picasso96 can't be used with a 68000/68010 or 68EC020 emulation. It\n" "requires a 68020 emulation. Turning off Picasso96.\n"); currprefs.gfxmem_size = 0; err = 1; } +#ifndef BSDSOCKET_SUPPORTED + if (currprefs.socket_emu) { + write_log ("Compile-time option of BSDSOCKET_SUPPORTED was not enabled. You can't use bsd-socket emulation.\n"); + currprefs.socket_emu = 0; + err = 1; + } +#endif + + if (currprefs.nr_floppies < 1 || currprefs.nr_floppies > 4) { + write_log ("Invalid number of floppies. Using 4.\n"); + currprefs.nr_floppies = 4; + err = 1; + } + if (currprefs.collision_level < 0 || currprefs.collision_level > 3) { + write_log ("Invalid collision support level. Using 1.\n"); + currprefs.collision_level = 1; + err = 1; + } if (err) - fprintf (stderr, "Please use \"uae -h\" to get usage information.\n"); + write_log ("Please use \"uae -h\" to get usage information.\n"); } int quit_program = 0; -void uae_reset (void) +void uae_reset (int hardreset) { - if (quit_program == 0) + if (quit_program == 0) { quit_program = -2; + if (hardreset) + quit_program = -3; + } } void uae_quit (void) @@ -270,24 +327,6 @@ void uae_quit (void) quit_program = -1; } -const char *gameport_state (int nr) -{ - if (JSEM_ISJOY0 (nr, &currprefs) && nr_joysticks > 0) - return "using joystick #0"; - else if (JSEM_ISJOY1 (nr, &currprefs) && nr_joysticks > 1) - return "using joystick #1"; - else if (JSEM_ISMOUSE (nr, &currprefs)) - return "using mouse"; - else if (JSEM_ISNUMPAD (nr, &currprefs)) - return "using numeric pad as joystick"; - else if (JSEM_ISCURSOR (nr, &currprefs)) - return "using cursor keys as joystick"; - else if (JSEM_ISSOMEWHEREELSE (nr, &currprefs)) - return "using T/F/H/B/Alt as joystick"; - - return "not connected"; -} - #ifndef DONT_PARSE_CMDLINE void usage (void) @@ -296,29 +335,33 @@ void usage (void) void parse_cmdline (int argc, char **argv) { - char *param_string; - int longind = 0, last_longind = -1, result, i = 0; - struct option longopts[] = - { - { "help", 0, 0, 'h' }, - { "file", 0, 0, 'f' }, - { 0, 0, 0, 0 } - }; - - while ((result = getopt_long (argc, argv, "s:f:h", longopts, &longind)) != EOF) { - switch (result) { - case 's': - cfgfile_parse_line (&currprefs, optarg); - break; - case 'f': - cfgfile_load (&currprefs, optarg); - break; - - case 'h': - default: + int i; + for (i = 1; i < argc; i++) { + if (strncmp (argv[i], "-config=", 8) == 0) + cfgfile_load (&currprefs, argv[i] + 8); + /* Check for new-style "-f xxx" argument, where xxx is config-file */ + else if (strcmp (argv[i], "-f") == 0) { + if (i + 1 == argc) + write_log ("Missing argument for '-f' option.\n"); + else + cfgfile_load (&currprefs, argv[++i]); + } else if (strcmp (argv[i], "-s") == 0) { + if (i + 1 == argc) + write_log ("Missing argument for '-s' option.\n"); + else + cfgfile_parse_line (&currprefs, argv[++i]); + } else if (strcmp (argv[i], "-h") == 0 || strcmp (argv[i], "-help") == 0) { usage (); exit (0); - break; + } else { + if (argv[i][0] == '-' && argv[i][1] != '\0') { + const char *arg = argv[i] + 2; + int extra_arg = *arg == '\0'; + if (extra_arg) + arg = i + 1 < argc ? argv[i + 1] : 0; + if (parse_cmdline_option (argv[i][1], arg) && extra_arg) + i++; + } } } } @@ -346,40 +389,22 @@ static void parse_cmdline_and_init_file /* sam: if not found in $HOME then look in current directory */ strcpy (optionsfile, OPTIONSFILENAME); cfgfile_load (&currprefs, optionsfile); - } #endif + } parse_cmdline (argc, argv); } -void write_log_standard (const char *fmt, ...) -{ - va_list ap; - va_start (ap, fmt); -#ifdef HAVE_VFPRINTF - vfprintf (stderr, fmt, ap); -#else - /* Technique stolen from GCC. */ - { - int x1, x2, x3, x4, x5, x6, x7, x8; - x1 = va_arg (ap, int); - x2 = va_arg (ap, int); - x3 = va_arg (ap, int); - x4 = va_arg (ap, int); - x5 = va_arg (ap, int); - x6 = va_arg (ap, int); - x7 = va_arg (ap, int); - x8 = va_arg (ap, int); - fprintf (stderr, fmt, x1, x2, x3, x4, x5, x6, x7, x8); - } -#endif -} - void reset_all_systems (void) { + init_eventtab (); + + memory_reset (); bsdlib_reset (); filesys_reset (); filesys_start_threads (); + scsidev_reset (); + scsidev_start_threads (); } /* Okay, this stuff looks strange, but it is here to encourage people who @@ -394,21 +419,31 @@ void reset_all_systems (void) void do_start_program (void) { + if (quit_program == -1) + return; + inputdevice_updateconfig (&currprefs); + /* Do a reset on startup. Whether this is elegant is debatable. */ - quit_program = 2; + if (quit_program >= 0) + quit_program = 2; m68k_go (1); } void do_leave_program (void) { graphics_leave (); - close_joystick (); + inputdevice_close (); close_sound (); dump_counts (); serial_exit (); zfile_exit (); if (! no_gui) gui_exit (); +#ifdef USE_SDL + SDL_Quit (); +#endif + expansion_cleanup (); + memory_cleanup (); } void start_program (void) @@ -425,36 +460,48 @@ void real_main (int argc, char **argv) { FILE *hf; +#ifdef USE_SDL + SDL_Init (SDL_INIT_EVERYTHING | SDL_INIT_NOPARACHUTE); +#endif + default_prefs (&currprefs); - + if (! graphics_setup ()) { exit (1); } rtarea_init (); hardfile_install (); + scsidev_install (); parse_cmdline_and_init_file (argc, argv); machdep_init (); + init_gtod (); + if (gtod_resolution < 1000) { + use_gtod = 1; + syncbase = 1000000; + } if (! setup_sound ()) { - fprintf (stderr, "Sound driver unavailable: Sound output disabled\n"); + write_log ("Sound driver unavailable: Sound output disabled\n"); currprefs.produce_sound = 0; } - init_joystick (); + inputdevice_init (); + changed_prefs = currprefs; no_gui = ! currprefs.start_gui; if (! no_gui) { int err = gui_init (); + currprefs = changed_prefs; if (err == -1) { - fprintf (stderr, "Failed to initialize the GUI\n"); + write_log ("Failed to initialize the GUI\n"); } else if (err == -2) { exit (0); } } - if (sound_available && currprefs.produce_sound > 1 && ! init_sound ()) { - fprintf (stderr, "Sound driver unavailable: Sound output disabled\n"); + if (sound_available && currprefs.produce_sound > 1 && ! init_audio ()) { + write_log ("Sound driver unavailable: Sound output disabled\n"); currprefs.produce_sound = 0; } @@ -473,6 +520,7 @@ void real_main (int argc, char **argv) gfxlib_install (); emulib_install (); uaeexe_install (); + native2amiga_install (); custom_init (); /* Must come after memory_init */ serial_init (); @@ -481,7 +529,6 @@ void real_main (int argc, char **argv) reset_frame_rate_hack (); init_m68k(); /* must come after reset_frame_rate_hack (); */ - compiler_init (); gui_update (); if (graphics_init ()) { @@ -494,6 +541,12 @@ void real_main (int argc, char **argv) leave_program (); } +void uae_abort (const char *msg) +{ + write_log ("%s", msg); + abort (); +} + #ifndef NO_MAIN_IN_MAIN_C int main (int argc, char **argv) {