Source to bsd/conf/MASTER
#
# Mach Operating System
# Copyright (c) 1986 Carnegie-Mellon University
# All rights reserved. The CMU software License Agreement
# specifies the terms and conditions for use and redistribution.
#
#######################################################################
#
# Master machine independent configuration file.
#
# Specific configuration files are created based on this and
# the machine specific master file using the doconf script.
#
# Any changes to the master configuration files will affect all
# other configuration files based upon it.
#
#######################################################################
#
# To build a configuration, execute "doconf <configuration>."
# Configurations are specified in the "Configurations:" section
# of the MASTER and MASTER.* files as follows:
#
# <configuration> = [ <attribute0> <attribute1> ... <attributeN> ]
#
# Lines in the MASTER and MASTER.* files are selected based on
# the attribute selector list, found in a comment at the end of
# the line. This is a list of attributes separated by commas.
# The "!" operator selects the line if none of the attributes are
# specified.
#
# For example:
#
# <foo,bar> selects a line if "foo" or "bar" are specified.
# <!foo,bar> selects a line if neither "foo" nor "bar" is
# specified.
#
# Lines with no attributes specified are selected for all
# configurations.
#
#######################################################################
#
# STANDARD CONFIGURATION OPTIONS (select any combination)
#
# debug = extra kernel level debugging support
# mach = Mach support
#
# EXPERIMENTAL CONFIGURATION OPTIONS (select any combination, carefully)
#
# nbc = no buffer cache support
# simple = non-rollover clock support
# timing = precision timing support
# host = host resource control support
# fixpri = fixed priority threads
#
# MULTI-PROCESSOR CONFIGURATION (select at most one)
#
# multi16 = enable 16 multi-processors
# multi32 = enable 32 multi-processors
# multi48 = enable 48 multi-processors
#
# SYSTEM SIZE CONFIGURATION (select exactly one)
#
# xlarge = extra large scale system configuration
# large = large scale system configuration
# medium = medium scale system configuration
# small = small scale system configuration
# xsmall = extra small scale system configuration
# bsmall = special extra small scale system configuration for
# (e.g. for boot floppies)
#
#######################################################################
#
# Standard Mach Research Configurations:
# -------- ---- -------- ---------------
#
# These are the default configurations that can be used by most sites.
# They are used internally by the Mach project.
#
# MACH = [mach multi16 medium debug]
#
#######################################################################
#
ident NeXT
# obsolete timezone spec
options TIMEZONE=0, PST=0
options QUOTA # # <quota>
options INET
options NEW_VM_CODE # # <newvm>
options OLD_VM_CODE # # <!newvm>
options HW_AST # Hardware ast support # <hw_ast>
options HW_FOOTPRINT # Cache footprint support # <hw_foot>
options MACH # Standard Mach features # <mach>
options MACH_ASSERT # Compile in assertions # <test>
options MACH_COMPAT # Vendor syscall compatibility # <mach>
options MACH_COUNTERS # counters # <count>
options MACH_DEBUG # IPC debugging interface # <mdebug>
options MACH_FASTLINK # Fast symbolic links
options MACH_FIXPRI # Fixed priority threads # <fixpri>
options MACH_HOST # Mach host (resource alloc.) # <host>
options MACH_IPC_COMPAT # Enable old IPC interface # <ipc_compat>
options MACH_IPC_DEBUG # Enable IPC debugging calls # <ipc_debug>
options MACH_IPC_TEST # Testing code/printfs # <ipc_test>
options MACH_LDEBUG # Sanity-check simple locking # <test>
options MACH_NP # Mach IPC support # <np>
options MACH_NBC # No buffer cache # <nbc>
options REV_ENDIAN_FS # Reverse Endian FS # <revfs>
options MACH_NET # Fast network access # <mach_net>
options MACH_XP # external pager support # <xp>
options NORMA_IPC # NORMA IPC support # <norma_ipc>
options NORMA_DEVICE # NORMA unified device names # <norma_device>
options NORMA_VM # NORMA virtual memory support # <norma_vm>
options NORMA_TASK # NORMA task support # <norma_task>
options NORMA_ETHER # NORMA across ethernet # <norma_ether>
options SIMPLE_CLOCK # don't assume fixed tick # <simple_clock>
options STAT_TIME # Use statistical timing # <!timing>
options XPR_DEBUG # kernel tracing # <xpr_debug>
options KDEBUG # kernel tracing # <kdebug>
options DDM_DEBUG # driverkit-style tracing # <ddm_debug>
options MACH_OLD_VM_COPY # Old vm_copy technology # <!newvm>
options NO_DIRECT_RPC # for untyped mig servers #
options IPX # ipx stack # <ipx>
options EON # # <eon>
options ISO # ISO stack # <iso>
options LLC # 802.2 support # <llc>
options LOOP # loopback support # <loop>
options MROUTING # multicast routing # <mrouting>
options NS # Netware # <ns>
options PPP # PPP # <ppp>
options ROUTING # routing # <routing>
options TPIP # # <tpip>
options TUN # # <tun>
options VLAN # # <vlan>
options IPDIVERT # Divert sockets (for NAT) # <ipdivert>
options IPFIREWALL # IP Firewalling (used by NAT) # <ipfirewall>
#options IPFIREWALL_VERBOSE # # <ipfirewall>
options IPFIREWALL_FORWARD #Transparent proxy # <ipfirewall>
options IPFIREWALL_DEFAULT_TO_ACCEPT # allow everything by default # <ipfirewall>
options MULTICAST # Internet Protocol Class-D $
#
# 4.4 general kernel
#
options COMPAT_43 # 4.3 BSD compatibility # <compat_43>
options DIAGNOSTIC # diagnostics # <diagnostic>
options KTRACE # ktrace support # <ktrace>
#
# 4.4 filesystems
#
options FFS # Fast Filesystem Support # <ffs>
options HFS # HFS/HFS+ support # <hfs>
options HFS_HARDLINKS # HFS+ hardlink support # <hfs>
options FIFO # fifo support # <fifo>
options PORTAL # portal_fs support # <portal>
options UNION # union_fs support # <union>
options FDESC # fdesc_fs support # <fdesc>
options CD9660 # ISO 9660 CD-ROM support # <cd9660>
options VOLFS # volfs support # <volfs>
options DEVFS # devfs support # <devfs>
#
# NFS support
#
options NFSCLIENT # Be an NFS client # <nfsserver>
options NFSSERVER # Be an NFS server # <nfsclient>
#
# AppleTalk Support
#
options NETAT # AppleTalk support # <netat>
options AURP_SUPPORT # AppleTalk Update Routing # <netat>
#
# Machine Independent Apple Features
#
options KERNSERV # kernel_server intarface # <kernserv>
options MALLOCDEBUG # kernel malloc debugging # <mallocdebug>
options DRIVERKIT # driverkit support # <driverkit>
options KERNOBJC # Objective-C support # <kernobjc>
options OBJCTEST # Objc internal test # <objctest>
options KERNEL_STACK # MI kernel stack support # <kernstack>
profile # build a profiling kernel # <profile>
makeoptions LIBDRIVER = "libDriver_kern.o" # <libdriver>
makeoptions LIBOBJC = "libkobjc.o" # <kernobjc>
maxusers 64 # <xlarge>
maxusers 50 # <large>
maxusers 32 # <medium>
maxusers 16 # <small>
maxusers 8 # <xsmall,msmall>
maxusers 2 # <bsmall>
#
# Multi-processor selection
#
pseudo-device cpus 64 # <multi64>
pseudo-device cpus 32 # <multi32>
pseudo-device cpus 16 # <multi16>
pseudo-device cpus 2 # <multi2>
pseudo-device cpus 1 # <!multi64,multi32,multi16,multi2>
#
# Ethernet (ARP)
#
pseudo-device ether
#
# Network loopback device
#
pseudo-device loop
#
# UCB pseudo terminal service
#
pseudo-device pty 32 init pty_init
#
# packet filter device
#
pseudo-device bpfilter 4 init bpf_init
#
# shim to "linux" mach disk drivers (mach drivers must also be turned on)
#
# now using iokit disk shim, this is code is obsolete
#pseudo-device diskshim